Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 4001 insertions, 0 deletions

diff --git a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
new file mode 100644
index 000000000..16253eda1
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
@@ -0,0 +1,301 @@
+===================
+Block IO Controller
+===================
+
+Overview
+========
+cgroup subsys "blkio" implements the block io controller. There seems to be
+a need of various kinds of IO control policies (like proportional BW, max BW)
+both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
+Plan is to use the same cgroup based management interface for blkio controller
+and based on user options switch IO policies in the background.
+
+One IO control policy is throttling policy which can be used to
+specify upper IO rate limits on devices. This policy is implemented in
+generic block layer and can be used on leaf nodes as well as higher
+level logical devices like device mapper.
+
+HOWTO
+=====
+
+Throttling/Upper Limit policy
+-----------------------------
+Enable Block IO controller::
+
+	CONFIG_BLK_CGROUP=y
+
+Enable throttling in block layer::
+
+	CONFIG_BLK_DEV_THROTTLING=y
+
+Mount blkio controller (see cgroups.txt, Why are cgroups needed?)::
+
+        mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
+
+Specify a bandwidth rate on particular device for root group. The format
+for policy is "<major>:<minor>  <bytes_per_second>"::
+
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
+
+This will put a limit of 1MB/second on reads happening for root group
+on device having major/minor number 8:16.
+
+Run dd to read a file and see if rate is throttled to 1MB/s or not::
+
+        # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
+        1024+0 records in
+        1024+0 records out
+        4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
+
+Limits for writes can be put using blkio.throttle.write_bps_device file.
+
+Hierarchical Cgroups
+====================
+
+Throttling implements hierarchy support; however,
+throttling's hierarchy support is enabled iff "sane_behavior" is
+enabled from cgroup side, which currently is a development option and
+not publicly available.
+
+If somebody created a hierarchy like as follows::
+
+			root
+			/  \
+		     test1 test2
+			|
+		     test3
+
+Throttling with "sane_behavior" will handle the
+hierarchy correctly. For throttling, all limits apply
+to the whole subtree while all statistics are local to the IOs
+directly generated by tasks in that cgroup.
+
+Throttling without "sane_behavior" enabled from cgroup side will
+practically treat all groups at same level as if it looks like the
+following::
+
+				pivot
+			     /  /   \  \
+			root  test1 test2  test3
+
+Various user visible config options
+===================================
+
+  CONFIG_BLK_CGROUP
+	  Block IO controller.
+
+  CONFIG_BFQ_CGROUP_DEBUG
+	  Debug help. Right now some additional stats file show up in cgroup
+	  if this option is enabled.
+
+  CONFIG_BLK_DEV_THROTTLING
+	  Enable block device throttling support in block layer.
+
+Details of cgroup files
+=======================
+
+Proportional weight policy files
+--------------------------------
+
+  blkio.bfq.weight
+	  Specifies per cgroup weight. This is default weight of the group
+	  on all the devices until and unless overridden by per device rule
+	  (see `blkio.bfq.weight_device` below).
+
+	  Currently allowed range of weights is from 1 to 1000. For more details,
+          see Documentation/block/bfq-iosched.rst.
+
+  blkio.bfq.weight_device
+          Specifes per cgroup per device weights, overriding the default group
+          weight. For more details, see Documentation/block/bfq-iosched.rst.
+
+	  Following is the format::
+
+	    # echo dev_maj:dev_minor weight > blkio.bfq.weight_device
+
+	  Configure weight=300 on /dev/sdb (8:16) in this cgroup::
+
+	    # echo 8:16 300 > blkio.bfq.weight_device
+	    # cat blkio.bfq.weight_device
+	    dev     weight
+	    8:16    300
+
+	  Configure weight=500 on /dev/sda (8:0) in this cgroup::
+
+	    # echo 8:0 500 > blkio.bfq.weight_device
+	    # cat blkio.bfq.weight_device
+	    dev     weight
+	    8:0     500
+	    8:16    300
+
+	  Remove specific weight for /dev/sda in this cgroup::
+
+	    # echo 8:0 0 > blkio.bfq.weight_device
+	    # cat blkio.bfq.weight_device
+	    dev     weight
+	    8:16    300
+
+  blkio.time
+	  Disk time allocated to cgroup per device in milliseconds. First
+	  two fields specify the major and minor number of the device and
+	  third field specifies the disk time allocated to group in
+	  milliseconds.
+
+  blkio.sectors
+	  Number of sectors transferred to/from disk by the group. First
+	  two fields specify the major and minor number of the device and
+	  third field specifies the number of sectors transferred by the
+	  group to/from the device.
+
+  blkio.io_service_bytes
+	  Number of bytes transferred to/from the disk by the group. These
+	  are further divided by the type of operation - read or write, sync
+	  or async. First two fields specify the major and minor number of the
+	  device, third field specifies the operation type and the fourth field
+	  specifies the number of bytes.
+
+  blkio.io_serviced
+	  Number of IOs (bio) issued to the disk by the group. These
+	  are further divided by the type of operation - read or write, sync
+	  or async. First two fields specify the major and minor number of the
+	  device, third field specifies the operation type and the fourth field
+	  specifies the number of IOs.
+
+  blkio.io_service_time
+	  Total amount of time between request dispatch and request completion
+	  for the IOs done by this cgroup. This is in nanoseconds to make it
+	  meaningful for flash devices too. For devices with queue depth of 1,
+	  this time represents the actual service time. When queue_depth > 1,
+	  that is no longer true as requests may be served out of order. This
+	  may cause the service time for a given IO to include the service time
+	  of multiple IOs when served out of order which may result in total
+	  io_service_time > actual time elapsed. This time is further divided by
+	  the type of operation - read or write, sync or async. First two fields
+	  specify the major and minor number of the device, third field
+	  specifies the operation type and the fourth field specifies the
+	  io_service_time in ns.
+
+  blkio.io_wait_time
+	  Total amount of time the IOs for this cgroup spent waiting in the
+	  scheduler queues for service. This can be greater than the total time
+	  elapsed since it is cumulative io_wait_time for all IOs. It is not a
+	  measure of total time the cgroup spent waiting but rather a measure of
+	  the wait_time for its individual IOs. For devices with queue_depth > 1
+	  this metric does not include the time spent waiting for service once
+	  the IO is dispatched to the device but till it actually gets serviced
+	  (there might be a time lag here due to re-ordering of requests by the
+	  device). This is in nanoseconds to make it meaningful for flash
+	  devices too. This time is further divided by the type of operation -
+	  read or write, sync or async. First two fields specify the major and
+	  minor number of the device, third field specifies the operation type
+	  and the fourth field specifies the io_wait_time in ns.
+
+  blkio.io_merged
+	  Total number of bios/requests merged into requests belonging to this
+	  cgroup. This is further divided by the type of operation - read or
+	  write, sync or async.
+
+  blkio.io_queued
+	  Total number of requests queued up at any given instant for this
+	  cgroup. This is further divided by the type of operation - read or
+	  write, sync or async.
+
+  blkio.avg_queue_size
+	  Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
+	  The average queue size for this cgroup over the entire time of this
+	  cgroup's existence. Queue size samples are taken each time one of the
+	  queues of this cgroup gets a timeslice.
+
+  blkio.group_wait_time
+	  Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
+	  This is the amount of time the cgroup had to wait since it became busy
+	  (i.e., went from 0 to 1 request queued) to get a timeslice for one of
+	  its queues. This is different from the io_wait_time which is the
+	  cumulative total of the amount of time spent by each IO in that cgroup
+	  waiting in the scheduler queue. This is in nanoseconds. If this is
+	  read when the cgroup is in a waiting (for timeslice) state, the stat
+	  will only report the group_wait_time accumulated till the last time it
+	  got a timeslice and will not include the current delta.
+
+  blkio.empty_time
+	  Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
+	  This is the amount of time a cgroup spends without any pending
+	  requests when not being served, i.e., it does not include any time
+	  spent idling for one of the queues of the cgroup. This is in
+	  nanoseconds. If this is read when the cgroup is in an empty state,
+	  the stat will only report the empty_time accumulated till the last
+	  time it had a pending request and will not include the current delta.
+
+  blkio.idle_time
+	  Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
+	  This is the amount of time spent by the IO scheduler idling for a
+	  given cgroup in anticipation of a better request than the existing ones
+	  from other queues/cgroups. This is in nanoseconds. If this is read
+	  when the cgroup is in an idling state, the stat will only report the
+	  idle_time accumulated till the last idle period and will not include
+	  the current delta.
+
+  blkio.dequeue
+	  Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. This
+	  gives the statistics about how many a times a group was dequeued
+	  from service tree of the device. First two fields specify the major
+	  and minor number of the device and third field specifies the number
+	  of times a group was dequeued from a particular device.
+
+  blkio.*_recursive
+	  Recursive version of various stats. These files show the
+          same information as their non-recursive counterparts but
+          include stats from all the descendant cgroups.
+
+Throttling/Upper limit policy files
+-----------------------------------
+  blkio.throttle.read_bps_device
+	  Specifies upper limit on READ rate from the device. IO rate is
+	  specified in bytes per second. Rules are per device. Following is
+	  the format::
+
+	    echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
+
+  blkio.throttle.write_bps_device
+	  Specifies upper limit on WRITE rate to the device. IO rate is
+	  specified in bytes per second. Rules are per device. Following is
+	  the format::
+
+	    echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
+
+  blkio.throttle.read_iops_device
+	  Specifies upper limit on READ rate from the device. IO rate is
+	  specified in IO per second. Rules are per device. Following is
+	  the format::
+
+	   echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
+
+  blkio.throttle.write_iops_device
+	  Specifies upper limit on WRITE rate to the device. IO rate is
+	  specified in io per second. Rules are per device. Following is
+	  the format::
+
+	    echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
+
+          Note: If both BW and IOPS rules are specified for a device, then IO is
+          subjected to both the constraints.
+
+  blkio.throttle.io_serviced
+	  Number of IOs (bio) issued to the disk by the group. These
+	  are further divided by the type of operation - read or write, sync
+	  or async. First two fields specify the major and minor number of the
+	  device, third field specifies the operation type and the fourth field
+	  specifies the number of IOs.
+
+  blkio.throttle.io_service_bytes
+	  Number of bytes transferred to/from the disk by the group. These
+	  are further divided by the type of operation - read or write, sync
+	  or async. First two fields specify the major and minor number of the
+	  device, third field specifies the operation type and the fourth field
+	  specifies the number of bytes.
+
+Common files among various policies
+-----------------------------------
+  blkio.reset_stats
+	  Writing an int to this file will result in resetting all the stats
+	  for that cgroup.
diff --git a/Documentation/admin-guide/cgroup-v1/cgroups.rst b/Documentation/admin-guide/cgroup-v1/cgroups.rst
new file mode 100644
index 000000000..b0688011e
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/cgroups.rst
@@ -0,0 +1,695 @@
+==============
+Control Groups
+==============
+
+Written by Paul Menage <menage@google.com> based on
+Documentation/admin-guide/cgroup-v1/cpusets.rst
+
+Original copyright statements from cpusets.txt:
+
+Portions Copyright (C) 2004 BULL SA.
+
+Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
+
+Modified by Paul Jackson <pj@sgi.com>
+
+Modified by Christoph Lameter <cl@linux.com>
+
+.. CONTENTS:
+
+	1. Control Groups
+	1.1 What are cgroups ?
+	1.2 Why are cgroups needed ?
+	1.3 How are cgroups implemented ?
+	1.4 What does notify_on_release do ?
+	1.5 What does clone_children do ?
+	1.6 How do I use cgroups ?
+	2. Usage Examples and Syntax
+	2.1 Basic Usage
+	2.2 Attaching processes
+	2.3 Mounting hierarchies by name
+	3. Kernel API
+	3.1 Overview
+	3.2 Synchronization
+	3.3 Subsystem API
+	4. Extended attributes usage
+	5. Questions
+
+1. Control Groups
+=================
+
+1.1 What are cgroups ?
+----------------------
+
+Control Groups provide a mechanism for aggregating/partitioning sets of
+tasks, and all their future children, into hierarchical groups with
+specialized behaviour.
+
+Definitions:
+
+A *cgroup* associates a set of tasks with a set of parameters for one
+or more subsystems.
+
+A *subsystem* is a module that makes use of the task grouping
+facilities provided by cgroups to treat groups of tasks in
+particular ways. A subsystem is typically a "resource controller" that
+schedules a resource or applies per-cgroup limits, but it may be
+anything that wants to act on a group of processes, e.g. a
+virtualization subsystem.
+
+A *hierarchy* is a set of cgroups arranged in a tree, such that
+every task in the system is in exactly one of the cgroups in the
+hierarchy, and a set of subsystems; each subsystem has system-specific
+state attached to each cgroup in the hierarchy.  Each hierarchy has
+an instance of the cgroup virtual filesystem associated with it.
+
+At any one time there may be multiple active hierarchies of task
+cgroups. Each hierarchy is a partition of all tasks in the system.
+
+User-level code may create and destroy cgroups by name in an
+instance of the cgroup virtual file system, specify and query to
+which cgroup a task is assigned, and list the task PIDs assigned to
+a cgroup. Those creations and assignments only affect the hierarchy
+associated with that instance of the cgroup file system.
+
+On their own, the only use for cgroups is for simple job
+tracking. The intention is that other subsystems hook into the generic
+cgroup support to provide new attributes for cgroups, such as
+accounting/limiting the resources which processes in a cgroup can
+access. For example, cpusets (see Documentation/admin-guide/cgroup-v1/cpusets.rst) allow
+you to associate a set of CPUs and a set of memory nodes with the
+tasks in each cgroup.
+
+1.2 Why are cgroups needed ?
+----------------------------
+
+There are multiple efforts to provide process aggregations in the
+Linux kernel, mainly for resource-tracking purposes. Such efforts
+include cpusets, CKRM/ResGroups, UserBeanCounters, and virtual server
+namespaces. These all require the basic notion of a
+grouping/partitioning of processes, with newly forked processes ending
+up in the same group (cgroup) as their parent process.
+
+The kernel cgroup patch provides the minimum essential kernel
+mechanisms required to efficiently implement such groups. It has
+minimal impact on the system fast paths, and provides hooks for
+specific subsystems such as cpusets to provide additional behaviour as
+desired.
+
+Multiple hierarchy support is provided to allow for situations where
+the division of tasks into cgroups is distinctly different for
+different subsystems - having parallel hierarchies allows each
+hierarchy to be a natural division of tasks, without having to handle
+complex combinations of tasks that would be present if several
+unrelated subsystems needed to be forced into the same tree of
+cgroups.
+
+At one extreme, each resource controller or subsystem could be in a
+separate hierarchy; at the other extreme, all subsystems
+would be attached to the same hierarchy.
+
+As an example of a scenario (originally proposed by vatsa@in.ibm.com)
+that can benefit from multiple hierarchies, consider a large
+university server with various users - students, professors, system
+tasks etc. The resource planning for this server could be along the
+following lines::
+
+       CPU :          "Top cpuset"
+                       /       \
+               CPUSet1         CPUSet2
+                  |               |
+               (Professors)    (Students)
+
+               In addition (system tasks) are attached to topcpuset (so
+               that they can run anywhere) with a limit of 20%
+
+       Memory : Professors (50%), Students (30%), system (20%)
+
+       Disk : Professors (50%), Students (30%), system (20%)
+
+       Network : WWW browsing (20%), Network File System (60%), others (20%)
+                               / \
+               Professors (15%)  students (5%)
+
+Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd goes
+into the NFS network class.
+
+At the same time Firefox/Lynx will share an appropriate CPU/Memory class
+depending on who launched it (prof/student).
+
+With the ability to classify tasks differently for different resources
+(by putting those resource subsystems in different hierarchies),
+the admin can easily set up a script which receives exec notifications
+and depending on who is launching the browser he can::
+
+    # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
+
+With only a single hierarchy, he now would potentially have to create
+a separate cgroup for every browser launched and associate it with
+appropriate network and other resource class.  This may lead to
+proliferation of such cgroups.
+
+Also let's say that the administrator would like to give enhanced network
+access temporarily to a student's browser (since it is night and the user
+wants to do online gaming :))  OR give one of the student's simulation
+apps enhanced CPU power.
+
+With ability to write PIDs directly to resource classes, it's just a
+matter of::
+
+       # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
+       (after some time)
+       # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
+
+Without this ability, the administrator would have to split the cgroup into
+multiple separate ones and then associate the new cgroups with the
+new resource classes.
+
+
+
+1.3 How are cgroups implemented ?
+---------------------------------
+
+Control Groups extends the kernel as follows:
+
+ - Each task in the system has a reference-counted pointer to a
+   css_set.
+
+ - A css_set contains a set of reference-counted pointers to
+   cgroup_subsys_state objects, one for each cgroup subsystem
+   registered in the system. There is no direct link from a task to
+   the cgroup of which it's a member in each hierarchy, but this
+   can be determined by following pointers through the
+   cgroup_subsys_state objects. This is because accessing the
+   subsystem state is something that's expected to happen frequently
+   and in performance-critical code, whereas operations that require a
+   task's actual cgroup assignments (in particular, moving between
+   cgroups) are less common. A linked list runs through the cg_list
+   field of each task_struct using the css_set, anchored at
+   css_set->tasks.
+
+ - A cgroup hierarchy filesystem can be mounted for browsing and
+   manipulation from user space.
+
+ - You can list all the tasks (by PID) attached to any cgroup.
+
+The implementation of cgroups requires a few, simple hooks
+into the rest of the kernel, none in performance-critical paths:
+
+ - in init/main.c, to initialize the root cgroups and initial
+   css_set at system boot.
+
+ - in fork and exit, to attach and detach a task from its css_set.
+
+In addition, a new file system of type "cgroup" may be mounted, to
+enable browsing and modifying the cgroups presently known to the
+kernel.  When mounting a cgroup hierarchy, you may specify a
+comma-separated list of subsystems to mount as the filesystem mount
+options.  By default, mounting the cgroup filesystem attempts to
+mount a hierarchy containing all registered subsystems.
+
+If an active hierarchy with exactly the same set of subsystems already
+exists, it will be reused for the new mount. If no existing hierarchy
+matches, and any of the requested subsystems are in use in an existing
+hierarchy, the mount will fail with -EBUSY. Otherwise, a new hierarchy
+is activated, associated with the requested subsystems.
+
+It's not currently possible to bind a new subsystem to an active
+cgroup hierarchy, or to unbind a subsystem from an active cgroup
+hierarchy. This may be possible in future, but is fraught with nasty
+error-recovery issues.
+
+When a cgroup filesystem is unmounted, if there are any
+child cgroups created below the top-level cgroup, that hierarchy
+will remain active even though unmounted; if there are no
+child cgroups then the hierarchy will be deactivated.
+
+No new system calls are added for cgroups - all support for
+querying and modifying cgroups is via this cgroup file system.
+
+Each task under /proc has an added file named 'cgroup' displaying,
+for each active hierarchy, the subsystem names and the cgroup name
+as the path relative to the root of the cgroup file system.
+
+Each cgroup is represented by a directory in the cgroup file system
+containing the following files describing that cgroup:
+
+ - tasks: list of tasks (by PID) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread ID into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of thread group IDs in the cgroup.  This list is
+   not guaranteed to be sorted or free of duplicate TGIDs, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a thread group ID into this file moves all threads in that
+   group into this cgroup.
+ - notify_on_release flag: run the release agent on exit?
+ - release_agent: the path to use for release notifications (this file
+   exists in the top cgroup only)
+
+Other subsystems such as cpusets may add additional files in each
+cgroup dir.
+
+New cgroups are created using the mkdir system call or shell
+command.  The properties of a cgroup, such as its flags, are
+modified by writing to the appropriate file in that cgroups
+directory, as listed above.
+
+The named hierarchical structure of nested cgroups allows partitioning
+a large system into nested, dynamically changeable, "soft-partitions".
+
+The attachment of each task, automatically inherited at fork by any
+children of that task, to a cgroup allows organizing the work load
+on a system into related sets of tasks.  A task may be re-attached to
+any other cgroup, if allowed by the permissions on the necessary
+cgroup file system directories.
+
+When a task is moved from one cgroup to another, it gets a new
+css_set pointer - if there's an already existing css_set with the
+desired collection of cgroups then that group is reused, otherwise a new
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
+
+To allow access from a cgroup to the css_sets (and hence tasks)
+that comprise it, a set of cg_cgroup_link objects form a lattice;
+each cg_cgroup_link is linked into a list of cg_cgroup_links for
+a single cgroup on its cgrp_link_list field, and a list of
+cg_cgroup_links for a single css_set on its cg_link_list.
+
+Thus the set of tasks in a cgroup can be listed by iterating over
+each css_set that references the cgroup, and sub-iterating over
+each css_set's task set.
+
+The use of a Linux virtual file system (vfs) to represent the
+cgroup hierarchy provides for a familiar permission and name space
+for cgroups, with a minimum of additional kernel code.
+
+1.4 What does notify_on_release do ?
+------------------------------------
+
+If the notify_on_release flag is enabled (1) in a cgroup, then
+whenever the last task in the cgroup leaves (exits or attaches to
+some other cgroup) and the last child cgroup of that cgroup
+is removed, then the kernel runs the command specified by the contents
+of the "release_agent" file in that hierarchy's root directory,
+supplying the pathname (relative to the mount point of the cgroup
+file system) of the abandoned cgroup.  This enables automatic
+removal of abandoned cgroups.  The default value of
+notify_on_release in the root cgroup at system boot is disabled
+(0).  The default value of other cgroups at creation is the current
+value of their parents' notify_on_release settings. The default value of
+a cgroup hierarchy's release_agent path is empty.
+
+1.5 What does clone_children do ?
+---------------------------------
+
+This flag only affects the cpuset controller. If the clone_children
+flag is enabled (1) in a cgroup, a new cpuset cgroup will copy its
+configuration from the parent during initialization.
+
+1.6 How do I use cgroups ?
+--------------------------
+
+To start a new job that is to be contained within a cgroup, using
+the "cpuset" cgroup subsystem, the steps are something like::
+
+ 1) mount -t tmpfs cgroup_root /sys/fs/cgroup
+ 2) mkdir /sys/fs/cgroup/cpuset
+ 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ 4) Create the new cgroup by doing mkdir's and write's (or echo's) in
+    the /sys/fs/cgroup/cpuset virtual file system.
+ 5) Start a task that will be the "founding father" of the new job.
+ 6) Attach that task to the new cgroup by writing its PID to the
+    /sys/fs/cgroup/cpuset tasks file for that cgroup.
+ 7) fork, exec or clone the job tasks from this founding father task.
+
+For example, the following sequence of commands will setup a cgroup
+named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
+and then start a subshell 'sh' in that cgroup::
+
+  mount -t tmpfs cgroup_root /sys/fs/cgroup
+  mkdir /sys/fs/cgroup/cpuset
+  mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
+  cd /sys/fs/cgroup/cpuset
+  mkdir Charlie
+  cd Charlie
+  /bin/echo 2-3 > cpuset.cpus
+  /bin/echo 1 > cpuset.mems
+  /bin/echo $$ > tasks
+  sh
+  # The subshell 'sh' is now running in cgroup Charlie
+  # The next line should display '/Charlie'
+  cat /proc/self/cgroup
+
+2. Usage Examples and Syntax
+============================
+
+2.1 Basic Usage
+---------------
+
+Creating, modifying, using cgroups can be done through the cgroup
+virtual filesystem.
+
+To mount a cgroup hierarchy with all available subsystems, type::
+
+  # mount -t cgroup xxx /sys/fs/cgroup
+
+The "xxx" is not interpreted by the cgroup code, but will appear in
+/proc/mounts so may be any useful identifying string that you like.
+
+Note: Some subsystems do not work without some user input first.  For instance,
+if cpusets are enabled the user will have to populate the cpus and mems files
+for each new cgroup created before that group can be used.
+
+As explained in section `1.2 Why are cgroups needed?` you should create
+different hierarchies of cgroups for each single resource or group of
+resources you want to control. Therefore, you should mount a tmpfs on
+/sys/fs/cgroup and create directories for each cgroup resource or resource
+group::
+
+  # mount -t tmpfs cgroup_root /sys/fs/cgroup
+  # mkdir /sys/fs/cgroup/rg1
+
+To mount a cgroup hierarchy with just the cpuset and memory
+subsystems, type::
+
+  # mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
+
+While remounting cgroups is currently supported, it is not recommend
+to use it. Remounting allows changing bound subsystems and
+release_agent. Rebinding is hardly useful as it only works when the
+hierarchy is empty and release_agent itself should be replaced with
+conventional fsnotify. The support for remounting will be removed in
+the future.
+
+To Specify a hierarchy's release_agent::
+
+  # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
+    xxx /sys/fs/cgroup/rg1
+
+Note that specifying 'release_agent' more than once will return failure.
+
+Note that changing the set of subsystems is currently only supported
+when the hierarchy consists of a single (root) cgroup. Supporting
+the ability to arbitrarily bind/unbind subsystems from an existing
+cgroup hierarchy is intended to be implemented in the future.
+
+Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
+tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
+is the cgroup that holds the whole system.
+
+If you want to change the value of release_agent::
+
+  # echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
+
+It can also be changed via remount.
+
+If you want to create a new cgroup under /sys/fs/cgroup/rg1::
+
+  # cd /sys/fs/cgroup/rg1
+  # mkdir my_cgroup
+
+Now you want to do something with this cgroup:
+
+  # cd my_cgroup
+
+In this directory you can find several files::
+
+  # ls
+  cgroup.procs notify_on_release tasks
+  (plus whatever files added by the attached subsystems)
+
+Now attach your shell to this cgroup::
+
+  # /bin/echo $$ > tasks
+
+You can also create cgroups inside your cgroup by using mkdir in this
+directory::
+
+  # mkdir my_sub_cs
+
+To remove a cgroup, just use rmdir::
+
+  # rmdir my_sub_cs
+
+This will fail if the cgroup is in use (has cgroups inside, or
+has processes attached, or is held alive by other subsystem-specific
+reference).
+
+2.2 Attaching processes
+-----------------------
+
+::
+
+  # /bin/echo PID > tasks
+
+Note that it is PID, not PIDs. You can only attach ONE task at a time.
+If you have several tasks to attach, you have to do it one after another::
+
+  # /bin/echo PID1 > tasks
+  # /bin/echo PID2 > tasks
+	  ...
+  # /bin/echo PIDn > tasks
+
+You can attach the current shell task by echoing 0::
+
+  # echo 0 > tasks
+
+You can use the cgroup.procs file instead of the tasks file to move all
+threads in a threadgroup at once. Echoing the PID of any task in a
+threadgroup to cgroup.procs causes all tasks in that threadgroup to be
+attached to the cgroup. Writing 0 to cgroup.procs moves all tasks
+in the writing task's threadgroup.
+
+Note: Since every task is always a member of exactly one cgroup in each
+mounted hierarchy, to remove a task from its current cgroup you must
+move it into a new cgroup (possibly the root cgroup) by writing to the
+new cgroup's tasks file.
+
+Note: Due to some restrictions enforced by some cgroup subsystems, moving
+a process to another cgroup can fail.
+
+2.3 Mounting hierarchies by name
+--------------------------------
+
+Passing the name=<x> option when mounting a cgroups hierarchy
+associates the given name with the hierarchy.  This can be used when
+mounting a pre-existing hierarchy, in order to refer to it by name
+rather than by its set of active subsystems.  Each hierarchy is either
+nameless, or has a unique name.
+
+The name should match [\w.-]+
+
+When passing a name=<x> option for a new hierarchy, you need to
+specify subsystems manually; the legacy behaviour of mounting all
+subsystems when none are explicitly specified is not supported when
+you give a subsystem a name.
+
+The name of the subsystem appears as part of the hierarchy description
+in /proc/mounts and /proc/<pid>/cgroups.
+
+
+3. Kernel API
+=============
+
+3.1 Overview
+------------
+
+Each kernel subsystem that wants to hook into the generic cgroup
+system needs to create a cgroup_subsys object. This contains
+various methods, which are callbacks from the cgroup system, along
+with a subsystem ID which will be assigned by the cgroup system.
+
+Other fields in the cgroup_subsys object include:
+
+- subsys_id: a unique array index for the subsystem, indicating which
+  entry in cgroup->subsys[] this subsystem should be managing.
+
+- name: should be initialized to a unique subsystem name. Should be
+  no longer than MAX_CGROUP_TYPE_NAMELEN.
+
+- early_init: indicate if the subsystem needs early initialization
+  at system boot.
+
+Each cgroup object created by the system has an array of pointers,
+indexed by subsystem ID; this pointer is entirely managed by the
+subsystem; the generic cgroup code will never touch this pointer.
+
+3.2 Synchronization
+-------------------
+
+There is a global mutex, cgroup_mutex, used by the cgroup
+system. This should be taken by anything that wants to modify a
+cgroup. It may also be taken to prevent cgroups from being
+modified, but more specific locks may be more appropriate in that
+situation.
+
+See kernel/cgroup.c for more details.
+
+Subsystems can take/release the cgroup_mutex via the functions
+cgroup_lock()/cgroup_unlock().
+
+Accessing a task's cgroup pointer may be done in the following ways:
+- while holding cgroup_mutex
+- while holding the task's alloc_lock (via task_lock())
+- inside an rcu_read_lock() section via rcu_dereference()
+
+3.3 Subsystem API
+-----------------
+
+Each subsystem should:
+
+- add an entry in linux/cgroup_subsys.h
+- define a cgroup_subsys object called <name>_cgrp_subsys
+
+Each subsystem may export the following methods. The only mandatory
+methods are css_alloc/free. Any others that are null are presumed to
+be successful no-ops.
+
+``struct cgroup_subsys_state *css_alloc(struct cgroup *cgrp)``
+(cgroup_mutex held by caller)
+
+Called to allocate a subsystem state object for a cgroup. The
+subsystem should allocate its subsystem state object for the passed
+cgroup, returning a pointer to the new object on success or a
+ERR_PTR() value. On success, the subsystem pointer should point to
+a structure of type cgroup_subsys_state (typically embedded in a
+larger subsystem-specific object), which will be initialized by the
+cgroup system. Note that this will be called at initialization to
+create the root subsystem state for this subsystem; this case can be
+identified by the passed cgroup object having a NULL parent (since
+it's the root of the hierarchy) and may be an appropriate place for
+initialization code.
+
+``int css_online(struct cgroup *cgrp)``
+(cgroup_mutex held by caller)
+
+Called after @cgrp successfully completed all allocations and made
+visible to cgroup_for_each_child/descendant_*() iterators. The
+subsystem may choose to fail creation by returning -errno. This
+callback can be used to implement reliable state sharing and
+propagation along the hierarchy. See the comment on
+cgroup_for_each_descendant_pre() for details.
+
+``void css_offline(struct cgroup *cgrp);``
+(cgroup_mutex held by caller)
+
+This is the counterpart of css_online() and called iff css_online()
+has succeeded on @cgrp. This signifies the beginning of the end of
+@cgrp. @cgrp is being removed and the subsystem should start dropping
+all references it's holding on @cgrp. When all references are dropped,
+cgroup removal will proceed to the next step - css_free(). After this
+callback, @cgrp should be considered dead to the subsystem.
+
+``void css_free(struct cgroup *cgrp)``
+(cgroup_mutex held by caller)
+
+The cgroup system is about to free @cgrp; the subsystem should free
+its subsystem state object. By the time this method is called, @cgrp
+is completely unused; @cgrp->parent is still valid. (Note - can also
+be called for a newly-created cgroup if an error occurs after this
+subsystem's create() method has been called for the new cgroup).
+
+``int can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)``
+(cgroup_mutex held by caller)
+
+Called prior to moving one or more tasks into a cgroup; if the
+subsystem returns an error, this will abort the attach operation.
+@tset contains the tasks to be attached and is guaranteed to have at
+least one task in it.
+
+If there are multiple tasks in the taskset, then:
+  - it's guaranteed that all are from the same thread group
+  - @tset contains all tasks from the thread group whether or not
+    they're switching cgroups
+  - the first task is the leader
+
+Each @tset entry also contains the task's old cgroup and tasks which
+aren't switching cgroup can be skipped easily using the
+cgroup_taskset_for_each() iterator. Note that this isn't called on a
+fork. If this method returns 0 (success) then this should remain valid
+while the caller holds cgroup_mutex and it is ensured that either
+attach() or cancel_attach() will be called in future.
+
+``void css_reset(struct cgroup_subsys_state *css)``
+(cgroup_mutex held by caller)
+
+An optional operation which should restore @css's configuration to the
+initial state.  This is currently only used on the unified hierarchy
+when a subsystem is disabled on a cgroup through
+"cgroup.subtree_control" but should remain enabled because other
+subsystems depend on it.  cgroup core makes such a css invisible by
+removing the associated interface files and invokes this callback so
+that the hidden subsystem can return to the initial neutral state.
+This prevents unexpected resource control from a hidden css and
+ensures that the configuration is in the initial state when it is made
+visible again later.
+
+``void cancel_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)``
+(cgroup_mutex held by caller)
+
+Called when a task attach operation has failed after can_attach() has succeeded.
+A subsystem whose can_attach() has some side-effects should provide this
+function, so that the subsystem can implement a rollback. If not, not necessary.
+This will be called only about subsystems whose can_attach() operation have
+succeeded. The parameters are identical to can_attach().
+
+``void attach(struct cgroup *cgrp, struct cgroup_taskset *tset)``
+(cgroup_mutex held by caller)
+
+Called after the task has been attached to the cgroup, to allow any
+post-attachment activity that requires memory allocations or blocking.
+The parameters are identical to can_attach().
+
+``void fork(struct task_struct *task)``
+
+Called when a task is forked into a cgroup.
+
+``void exit(struct task_struct *task)``
+
+Called during task exit.
+
+``void free(struct task_struct *task)``
+
+Called when the task_struct is freed.
+
+``void bind(struct cgroup *root)``
+(cgroup_mutex held by caller)
+
+Called when a cgroup subsystem is rebound to a different hierarchy
+and root cgroup. Currently this will only involve movement between
+the default hierarchy (which never has sub-cgroups) and a hierarchy
+that is being created/destroyed (and hence has no sub-cgroups).
+
+4. Extended attribute usage
+===========================
+
+cgroup filesystem supports certain types of extended attributes in its
+directories and files.  The current supported types are:
+
+	- Trusted (XATTR_TRUSTED)
+	- Security (XATTR_SECURITY)
+
+Both require CAP_SYS_ADMIN capability to set.
+
+Like in tmpfs, the extended attributes in cgroup filesystem are stored
+using kernel memory and it's advised to keep the usage at minimum.  This
+is the reason why user defined extended attributes are not supported, since
+any user can do it and there's no limit in the value size.
+
+The current known users for this feature are SELinux to limit cgroup usage
+in containers and systemd for assorted meta data like main PID in a cgroup
+(systemd creates a cgroup per service).
+
+5. Questions
+============
+
+::
+
+  Q: what's up with this '/bin/echo' ?
+  A: bash's builtin 'echo' command does not check calls to write() against
+     errors. If you use it in the cgroup file system, you won't be
+     able to tell whether a command succeeded or failed.
+
+  Q: When I attach processes, only the first of the line gets really attached !
+  A: We can only return one error code per call to write(). So you should also
+     put only ONE PID.
diff --git a/Documentation/admin-guide/cgroup-v1/cpuacct.rst b/Documentation/admin-guide/cgroup-v1/cpuacct.rst
new file mode 100644
index 000000000..d30ed81d2
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/cpuacct.rst
@@ -0,0 +1,50 @@
+=========================
+CPU Accounting Controller
+=========================
+
+The CPU accounting controller is used to group tasks using cgroups and
+account the CPU usage of these groups of tasks.
+
+The CPU accounting controller supports multi-hierarchy groups. An accounting
+group accumulates the CPU usage of all of its child groups and the tasks
+directly present in its group.
+
+Accounting groups can be created by first mounting the cgroup filesystem::
+
+  # mount -t cgroup -ocpuacct none /sys/fs/cgroup
+
+With the above step, the initial or the parent accounting group becomes
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
+/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
+by this group which is essentially the CPU time obtained by all the tasks
+in the system.
+
+New accounting groups can be created under the parent group /sys/fs/cgroup::
+
+  # cd /sys/fs/cgroup
+  # mkdir g1
+  # echo $$ > g1/tasks
+
+The above steps create a new group g1 and move the current shell
+process (bash) into it. CPU time consumed by this bash and its children
+can be obtained from g1/cpuacct.usage and the same is accumulated in
+/sys/fs/cgroup/cpuacct.usage also.
+
+cpuacct.stat file lists a few statistics which further divide the
+CPU time obtained by the cgroup into user and system times. Currently
+the following statistics are supported:
+
+user: Time spent by tasks of the cgroup in user mode.
+system: Time spent by tasks of the cgroup in kernel mode.
+
+user and system are in USER_HZ unit.
+
+cpuacct controller uses percpu_counter interface to collect user and
+system times. This has two side effects:
+
+- It is theoretically possible to see wrong values for user and system times.
+  This is because percpu_counter_read() on 32bit systems isn't safe
+  against concurrent writes.
+- It is possible to see slightly outdated values for user and system times
+  due to the batch processing nature of percpu_counter.
diff --git a/Documentation/admin-guide/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst
new file mode 100644
index 000000000..5d844ed4d
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -0,0 +1,879 @@
+.. _cpusets:
+
+=======
+CPUSETS
+=======
+
+Copyright (C) 2004 BULL SA.
+
+Written by Simon.Derr@bull.net
+
+- Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
+- Modified by Paul Jackson <pj@sgi.com>
+- Modified by Christoph Lameter <cl@linux.com>
+- Modified by Paul Menage <menage@google.com>
+- Modified by Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+
+.. CONTENTS:
+
+   1. Cpusets
+     1.1 What are cpusets ?
+     1.2 Why are cpusets needed ?
+     1.3 How are cpusets implemented ?
+     1.4 What are exclusive cpusets ?
+     1.5 What is memory_pressure ?
+     1.6 What is memory spread ?
+     1.7 What is sched_load_balance ?
+     1.8 What is sched_relax_domain_level ?
+     1.9 How do I use cpusets ?
+   2. Usage Examples and Syntax
+     2.1 Basic Usage
+     2.2 Adding/removing cpus
+     2.3 Setting flags
+     2.4 Attaching processes
+   3. Questions
+   4. Contact
+
+1. Cpusets
+==========
+
+1.1 What are cpusets ?
+----------------------
+
+Cpusets provide a mechanism for assigning a set of CPUs and Memory
+Nodes to a set of tasks.   In this document "Memory Node" refers to
+an on-line node that contains memory.
+
+Cpusets constrain the CPU and Memory placement of tasks to only
+the resources within a task's current cpuset.  They form a nested
+hierarchy visible in a virtual file system.  These are the essential
+hooks, beyond what is already present, required to manage dynamic
+job placement on large systems.
+
+Cpusets use the generic cgroup subsystem described in
+Documentation/admin-guide/cgroup-v1/cgroups.rst.
+
+Requests by a task, using the sched_setaffinity(2) system call to
+include CPUs in its CPU affinity mask, and using the mbind(2) and
+set_mempolicy(2) system calls to include Memory Nodes in its memory
+policy, are both filtered through that task's cpuset, filtering out any
+CPUs or Memory Nodes not in that cpuset.  The scheduler will not
+schedule a task on a CPU that is not allowed in its cpus_allowed
+vector, and the kernel page allocator will not allocate a page on a
+node that is not allowed in the requesting task's mems_allowed vector.
+
+User level code may create and destroy cpusets by name in the cgroup
+virtual file system, manage the attributes and permissions of these
+cpusets and which CPUs and Memory Nodes are assigned to each cpuset,
+specify and query to which cpuset a task is assigned, and list the
+task pids assigned to a cpuset.
+
+
+1.2 Why are cpusets needed ?
+----------------------------
+
+The management of large computer systems, with many processors (CPUs),
+complex memory cache hierarchies and multiple Memory Nodes having
+non-uniform access times (NUMA) presents additional challenges for
+the efficient scheduling and memory placement of processes.
+
+Frequently more modest sized systems can be operated with adequate
+efficiency just by letting the operating system automatically share
+the available CPU and Memory resources amongst the requesting tasks.
+
+But larger systems, which benefit more from careful processor and
+memory placement to reduce memory access times and contention,
+and which typically represent a larger investment for the customer,
+can benefit from explicitly placing jobs on properly sized subsets of
+the system.
+
+This can be especially valuable on:
+
+    * Web Servers running multiple instances of the same web application,
+    * Servers running different applications (for instance, a web server
+      and a database), or
+    * NUMA systems running large HPC applications with demanding
+      performance characteristics.
+
+These subsets, or "soft partitions" must be able to be dynamically
+adjusted, as the job mix changes, without impacting other concurrently
+executing jobs. The location of the running jobs pages may also be moved
+when the memory locations are changed.
+
+The kernel cpuset patch provides the minimum essential kernel
+mechanisms required to efficiently implement such subsets.  It
+leverages existing CPU and Memory Placement facilities in the Linux
+kernel to avoid any additional impact on the critical scheduler or
+memory allocator code.
+
+
+1.3 How are cpusets implemented ?
+---------------------------------
+
+Cpusets provide a Linux kernel mechanism to constrain which CPUs and
+Memory Nodes are used by a process or set of processes.
+
+The Linux kernel already has a pair of mechanisms to specify on which
+CPUs a task may be scheduled (sched_setaffinity) and on which Memory
+Nodes it may obtain memory (mbind, set_mempolicy).
+
+Cpusets extends these two mechanisms as follows:
+
+ - Cpusets are sets of allowed CPUs and Memory Nodes, known to the
+   kernel.
+ - Each task in the system is attached to a cpuset, via a pointer
+   in the task structure to a reference counted cgroup structure.
+ - Calls to sched_setaffinity are filtered to just those CPUs
+   allowed in that task's cpuset.
+ - Calls to mbind and set_mempolicy are filtered to just
+   those Memory Nodes allowed in that task's cpuset.
+ - The root cpuset contains all the systems CPUs and Memory
+   Nodes.
+ - For any cpuset, one can define child cpusets containing a subset
+   of the parents CPU and Memory Node resources.
+ - The hierarchy of cpusets can be mounted at /dev/cpuset, for
+   browsing and manipulation from user space.
+ - A cpuset may be marked exclusive, which ensures that no other
+   cpuset (except direct ancestors and descendants) may contain
+   any overlapping CPUs or Memory Nodes.
+ - You can list all the tasks (by pid) attached to any cpuset.
+
+The implementation of cpusets requires a few, simple hooks
+into the rest of the kernel, none in performance critical paths:
+
+ - in init/main.c, to initialize the root cpuset at system boot.
+ - in fork and exit, to attach and detach a task from its cpuset.
+ - in sched_setaffinity, to mask the requested CPUs by what's
+   allowed in that task's cpuset.
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
+   the CPUs allowed by their cpuset, if possible.
+ - in the mbind and set_mempolicy system calls, to mask the requested
+   Memory Nodes by what's allowed in that task's cpuset.
+ - in page_alloc.c, to restrict memory to allowed nodes.
+ - in vmscan.c, to restrict page recovery to the current cpuset.
+
+You should mount the "cgroup" filesystem type in order to enable
+browsing and modifying the cpusets presently known to the kernel.  No
+new system calls are added for cpusets - all support for querying and
+modifying cpusets is via this cpuset file system.
+
+The /proc/<pid>/status file for each task has four added lines,
+displaying the task's cpus_allowed (on which CPUs it may be scheduled)
+and mems_allowed (on which Memory Nodes it may obtain memory),
+in the two formats seen in the following example::
+
+  Cpus_allowed:   ffffffff,ffffffff,ffffffff,ffffffff
+  Cpus_allowed_list:      0-127
+  Mems_allowed:   ffffffff,ffffffff
+  Mems_allowed_list:      0-63
+
+Each cpuset is represented by a directory in the cgroup file system
+containing (on top of the standard cgroup files) the following
+files describing that cpuset:
+
+ - cpuset.cpus: list of CPUs in that cpuset
+ - cpuset.mems: list of Memory Nodes in that cpuset
+ - cpuset.memory_migrate flag: if set, move pages to cpusets nodes
+ - cpuset.cpu_exclusive flag: is cpu placement exclusive?
+ - cpuset.mem_exclusive flag: is memory placement exclusive?
+ - cpuset.mem_hardwall flag:  is memory allocation hardwalled
+ - cpuset.memory_pressure: measure of how much paging pressure in cpuset
+ - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - cpuset.sched_relax_domain_level: the searching range when migrating tasks
+
+In addition, only the root cpuset has the following file:
+
+ - cpuset.memory_pressure_enabled flag: compute memory_pressure?
+
+New cpusets are created using the mkdir system call or shell
+command.  The properties of a cpuset, such as its flags, allowed
+CPUs and Memory Nodes, and attached tasks, are modified by writing
+to the appropriate file in that cpusets directory, as listed above.
+
+The named hierarchical structure of nested cpusets allows partitioning
+a large system into nested, dynamically changeable, "soft-partitions".
+
+The attachment of each task, automatically inherited at fork by any
+children of that task, to a cpuset allows organizing the work load
+on a system into related sets of tasks such that each set is constrained
+to using the CPUs and Memory Nodes of a particular cpuset.  A task
+may be re-attached to any other cpuset, if allowed by the permissions
+on the necessary cpuset file system directories.
+
+Such management of a system "in the large" integrates smoothly with
+the detailed placement done on individual tasks and memory regions
+using the sched_setaffinity, mbind and set_mempolicy system calls.
+
+The following rules apply to each cpuset:
+
+ - Its CPUs and Memory Nodes must be a subset of its parents.
+ - It can't be marked exclusive unless its parent is.
+ - If its cpu or memory is exclusive, they may not overlap any sibling.
+
+These rules, and the natural hierarchy of cpusets, enable efficient
+enforcement of the exclusive guarantee, without having to scan all
+cpusets every time any of them change to ensure nothing overlaps a
+exclusive cpuset.  Also, the use of a Linux virtual file system (vfs)
+to represent the cpuset hierarchy provides for a familiar permission
+and name space for cpusets, with a minimum of additional kernel code.
+
+The cpus and mems files in the root (top_cpuset) cpuset are
+read-only.  The cpus file automatically tracks the value of
+cpu_online_mask using a CPU hotplug notifier, and the mems file
+automatically tracks the value of node_states[N_MEMORY]--i.e.,
+nodes with memory--using the cpuset_track_online_nodes() hook.
+
+The cpuset.effective_cpus and cpuset.effective_mems files are
+normally read-only copies of cpuset.cpus and cpuset.mems files
+respectively.  If the cpuset cgroup filesystem is mounted with the
+special "cpuset_v2_mode" option, the behavior of these files will become
+similar to the corresponding files in cpuset v2.  In other words, hotplug
+events will not change cpuset.cpus and cpuset.mems.  Those events will
+only affect cpuset.effective_cpus and cpuset.effective_mems which show
+the actual cpus and memory nodes that are currently used by this cpuset.
+See Documentation/admin-guide/cgroup-v2.rst for more information about
+cpuset v2 behavior.
+
+
+1.4 What are exclusive cpusets ?
+--------------------------------
+
+If a cpuset is cpu or mem exclusive, no other cpuset, other than
+a direct ancestor or descendant, may share any of the same CPUs or
+Memory Nodes.
+
+A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled",
+i.e. it restricts kernel allocations for page, buffer and other data
+commonly shared by the kernel across multiple users.  All cpusets,
+whether hardwalled or not, restrict allocations of memory for user
+space.  This enables configuring a system so that several independent
+jobs can share common kernel data, such as file system pages, while
+isolating each job's user allocation in its own cpuset.  To do this,
+construct a large mem_exclusive cpuset to hold all the jobs, and
+construct child, non-mem_exclusive cpusets for each individual job.
+Only a small amount of typical kernel memory, such as requests from
+interrupt handlers, is allowed to be taken outside even a
+mem_exclusive cpuset.
+
+
+1.5 What is memory_pressure ?
+-----------------------------
+The memory_pressure of a cpuset provides a simple per-cpuset metric
+of the rate that the tasks in a cpuset are attempting to free up in
+use memory on the nodes of the cpuset to satisfy additional memory
+requests.
+
+This enables batch managers monitoring jobs running in dedicated
+cpusets to efficiently detect what level of memory pressure that job
+is causing.
+
+This is useful both on tightly managed systems running a wide mix of
+submitted jobs, which may choose to terminate or re-prioritize jobs that
+are trying to use more memory than allowed on the nodes assigned to them,
+and with tightly coupled, long running, massively parallel scientific
+computing jobs that will dramatically fail to meet required performance
+goals if they start to use more memory than allowed to them.
+
+This mechanism provides a very economical way for the batch manager
+to monitor a cpuset for signs of memory pressure.  It's up to the
+batch manager or other user code to decide what to do about it and
+take action.
+
+==>
+    Unless this feature is enabled by writing "1" to the special file
+    /dev/cpuset/memory_pressure_enabled, the hook in the rebalance
+    code of __alloc_pages() for this metric reduces to simply noticing
+    that the cpuset_memory_pressure_enabled flag is zero.  So only
+    systems that enable this feature will compute the metric.
+
+Why a per-cpuset, running average:
+
+    Because this meter is per-cpuset, rather than per-task or mm,
+    the system load imposed by a batch scheduler monitoring this
+    metric is sharply reduced on large systems, because a scan of
+    the tasklist can be avoided on each set of queries.
+
+    Because this meter is a running average, instead of an accumulating
+    counter, a batch scheduler can detect memory pressure with a
+    single read, instead of having to read and accumulate results
+    for a period of time.
+
+    Because this meter is per-cpuset rather than per-task or mm,
+    the batch scheduler can obtain the key information, memory
+    pressure in a cpuset, with a single read, rather than having to
+    query and accumulate results over all the (dynamically changing)
+    set of tasks in the cpuset.
+
+A per-cpuset simple digital filter (requires a spinlock and 3 words
+of data per-cpuset) is kept, and updated by any task attached to that
+cpuset, if it enters the synchronous (direct) page reclaim code.
+
+A per-cpuset file provides an integer number representing the recent
+(half-life of 10 seconds) rate of direct page reclaims caused by
+the tasks in the cpuset, in units of reclaims attempted per second,
+times 1000.
+
+
+1.6 What is memory spread ?
+---------------------------
+There are two boolean flag files per cpuset that control where the
+kernel allocates pages for the file system buffers and related in
+kernel data structures.  They are called 'cpuset.memory_spread_page' and
+'cpuset.memory_spread_slab'.
+
+If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then
+the kernel will spread the file system buffers (page cache) evenly
+over all the nodes that the faulting task is allowed to use, instead
+of preferring to put those pages on the node where the task is running.
+
+If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set,
+then the kernel will spread some file system related slab caches,
+such as for inodes and dentries evenly over all the nodes that the
+faulting task is allowed to use, instead of preferring to put those
+pages on the node where the task is running.
+
+The setting of these flags does not affect anonymous data segment or
+stack segment pages of a task.
+
+By default, both kinds of memory spreading are off, and memory
+pages are allocated on the node local to where the task is running,
+except perhaps as modified by the task's NUMA mempolicy or cpuset
+configuration, so long as sufficient free memory pages are available.
+
+When new cpusets are created, they inherit the memory spread settings
+of their parent.
+
+Setting memory spreading causes allocations for the affected page
+or slab caches to ignore the task's NUMA mempolicy and be spread
+instead.    Tasks using mbind() or set_mempolicy() calls to set NUMA
+mempolicies will not notice any change in these calls as a result of
+their containing task's memory spread settings.  If memory spreading
+is turned off, then the currently specified NUMA mempolicy once again
+applies to memory page allocations.
+
+Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag
+files.  By default they contain "0", meaning that the feature is off
+for that cpuset.  If a "1" is written to that file, then that turns
+the named feature on.
+
+The implementation is simple.
+
+Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
+PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently
+joins that cpuset.  The page allocation calls for the page cache
+is modified to perform an inline check for this PFA_SPREAD_PAGE task
+flag, and if set, a call to a new routine cpuset_mem_spread_node()
+returns the node to prefer for the allocation.
+
+Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
+PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate
+pages from the node returned by cpuset_mem_spread_node().
+
+The cpuset_mem_spread_node() routine is also simple.  It uses the
+value of a per-task rotor cpuset_mem_spread_rotor to select the next
+node in the current task's mems_allowed to prefer for the allocation.
+
+This memory placement policy is also known (in other contexts) as
+round-robin or interleave.
+
+This policy can provide substantial improvements for jobs that need
+to place thread local data on the corresponding node, but that need
+to access large file system data sets that need to be spread across
+the several nodes in the jobs cpuset in order to fit.  Without this
+policy, especially for jobs that might have one thread reading in the
+data set, the memory allocation across the nodes in the jobs cpuset
+can become very uneven.
+
+1.7 What is sched_load_balance ?
+--------------------------------
+
+The kernel scheduler (kernel/sched/core.c) automatically load balances
+tasks.  If one CPU is underutilized, kernel code running on that
+CPU will look for tasks on other more overloaded CPUs and move those
+tasks to itself, within the constraints of such placement mechanisms
+as cpusets and sched_setaffinity.
+
+The algorithmic cost of load balancing and its impact on key shared
+kernel data structures such as the task list increases more than
+linearly with the number of CPUs being balanced.  So the scheduler
+has support to partition the systems CPUs into a number of sched
+domains such that it only load balances within each sched domain.
+Each sched domain covers some subset of the CPUs in the system;
+no two sched domains overlap; some CPUs might not be in any sched
+domain and hence won't be load balanced.
+
+Put simply, it costs less to balance between two smaller sched domains
+than one big one, but doing so means that overloads in one of the
+two domains won't be load balanced to the other one.
+
+By default, there is one sched domain covering all CPUs, including those
+marked isolated using the kernel boot time "isolcpus=" argument. However,
+the isolated CPUs will not participate in load balancing, and will not
+have tasks running on them unless explicitly assigned.
+
+This default load balancing across all CPUs is not well suited for
+the following two situations:
+
+ 1) On large systems, load balancing across many CPUs is expensive.
+    If the system is managed using cpusets to place independent jobs
+    on separate sets of CPUs, full load balancing is unnecessary.
+ 2) Systems supporting realtime on some CPUs need to minimize
+    system overhead on those CPUs, including avoiding task load
+    balancing if that is not needed.
+
+When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default
+setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus'
+be contained in a single sched domain, ensuring that load balancing
+can move a task (not otherwised pinned, as by sched_setaffinity)
+from any CPU in that cpuset to any other.
+
+When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the
+scheduler will avoid load balancing across the CPUs in that cpuset,
+--except-- in so far as is necessary because some overlapping cpuset
+has "sched_load_balance" enabled.
+
+So, for example, if the top cpuset has the flag "cpuset.sched_load_balance"
+enabled, then the scheduler will have one sched domain covering all
+CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other
+cpusets won't matter, as we're already fully load balancing.
+
+Therefore in the above two situations, the top cpuset flag
+"cpuset.sched_load_balance" should be disabled, and only some of the smaller,
+child cpusets have this flag enabled.
+
+When doing this, you don't usually want to leave any unpinned tasks in
+the top cpuset that might use non-trivial amounts of CPU, as such tasks
+may be artificially constrained to some subset of CPUs, depending on
+the particulars of this flag setting in descendant cpusets.  Even if
+such a task could use spare CPU cycles in some other CPUs, the kernel
+scheduler might not consider the possibility of load balancing that
+task to that underused CPU.
+
+Of course, tasks pinned to a particular CPU can be left in a cpuset
+that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere
+else anyway.
+
+There is an impedance mismatch here, between cpusets and sched domains.
+Cpusets are hierarchical and nest.  Sched domains are flat; they don't
+overlap and each CPU is in at most one sched domain.
+
+It is necessary for sched domains to be flat because load balancing
+across partially overlapping sets of CPUs would risk unstable dynamics
+that would be beyond our understanding.  So if each of two partially
+overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we
+form a single sched domain that is a superset of both.  We won't move
+a task to a CPU outside its cpuset, but the scheduler load balancing
+code might waste some compute cycles considering that possibility.
+
+This mismatch is why there is not a simple one-to-one relation
+between which cpusets have the flag "cpuset.sched_load_balance" enabled,
+and the sched domain configuration.  If a cpuset enables the flag, it
+will get balancing across all its CPUs, but if it disables the flag,
+it will only be assured of no load balancing if no other overlapping
+cpuset enables the flag.
+
+If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only
+one of them has this flag enabled, then the other may find its
+tasks only partially load balanced, just on the overlapping CPUs.
+This is just the general case of the top_cpuset example given a few
+paragraphs above.  In the general case, as in the top cpuset case,
+don't leave tasks that might use non-trivial amounts of CPU in
+such partially load balanced cpusets, as they may be artificially
+constrained to some subset of the CPUs allowed to them, for lack of
+load balancing to the other CPUs.
+
+CPUs in "cpuset.isolcpus" were excluded from load balancing by the
+isolcpus= kernel boot option, and will never be load balanced regardless
+of the value of "cpuset.sched_load_balance" in any cpuset.
+
+1.7.1 sched_load_balance implementation details.
+------------------------------------------------
+
+The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary
+to most cpuset flags.)  When enabled for a cpuset, the kernel will
+ensure that it can load balance across all the CPUs in that cpuset
+(makes sure that all the CPUs in the cpus_allowed of that cpuset are
+in the same sched domain.)
+
+If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled,
+then they will be (must be) both in the same sched domain.
+
+If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled,
+then by the above that means there is a single sched domain covering
+the whole system, regardless of any other cpuset settings.
+
+The kernel commits to user space that it will avoid load balancing
+where it can.  It will pick as fine a granularity partition of sched
+domains as it can while still providing load balancing for any set
+of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled.
+
+The internal kernel cpuset to scheduler interface passes from the
+cpuset code to the scheduler code a partition of the load balanced
+CPUs in the system. This partition is a set of subsets (represented
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+
+ - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs
+   and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
+
+This partition exactly defines what sched domains the scheduler should
+setup - one sched domain for each element (struct cpumask) in the
+partition.
+
+The scheduler remembers the currently active sched domain partitions.
+When the scheduler routine partition_sched_domains() is invoked from
+the cpuset code to update these sched domains, it compares the new
+partition requested with the current, and updates its sched domains,
+removing the old and adding the new, for each change.
+
+
+1.8 What is sched_relax_domain_level ?
+--------------------------------------
+
+In sched domain, the scheduler migrates tasks in 2 ways; periodic load
+balance on tick, and at time of some schedule events.
+
+When a task is woken up, scheduler try to move the task on idle CPU.
+For example, if a task A running on CPU X activates another task B
+on the same CPU X, and if CPU Y is X's sibling and performing idle,
+then scheduler migrate task B to CPU Y so that task B can start on
+CPU Y without waiting task A on CPU X.
+
+And if a CPU run out of tasks in its runqueue, the CPU try to pull
+extra tasks from other busy CPUs to help them before it is going to
+be idle.
+
+Of course it takes some searching cost to find movable tasks and/or
+idle CPUs, the scheduler might not search all CPUs in the domain
+every time.  In fact, in some architectures, the searching ranges on
+events are limited in the same socket or node where the CPU locates,
+while the load balance on tick searches all.
+
+For example, assume CPU Z is relatively far from CPU X.  Even if CPU Z
+is idle while CPU X and the siblings are busy, scheduler can't migrate
+woken task B from X to Z since it is out of its searching range.
+As the result, task B on CPU X need to wait task A or wait load balance
+on the next tick.  For some applications in special situation, waiting
+1 tick may be too long.
+
+The 'cpuset.sched_relax_domain_level' file allows you to request changing
+this searching range as you like.  This file takes int value which
+indicates size of searching range in levels ideally as follows,
+otherwise initial value -1 that indicates the cpuset has no request.
+
+====== ===========================================================
+  -1   no request. use system default or follow request of others.
+   0   no search.
+   1   search siblings (hyperthreads in a core).
+   2   search cores in a package.
+   3   search cpus in a node [= system wide on non-NUMA system]
+   4   search nodes in a chunk of node [on NUMA system]
+   5   search system wide [on NUMA system]
+====== ===========================================================
+
+The system default is architecture dependent.  The system default
+can be changed using the relax_domain_level= boot parameter.
+
+This file is per-cpuset and affect the sched domain where the cpuset
+belongs to.  Therefore if the flag 'cpuset.sched_load_balance' of a cpuset
+is disabled, then 'cpuset.sched_relax_domain_level' have no effect since
+there is no sched domain belonging the cpuset.
+
+If multiple cpusets are overlapping and hence they form a single sched
+domain, the largest value among those is used.  Be careful, if one
+requests 0 and others are -1 then 0 is used.
+
+Note that modifying this file will have both good and bad effects,
+and whether it is acceptable or not depends on your situation.
+Don't modify this file if you are not sure.
+
+If your situation is:
+
+ - The migration costs between each cpu can be assumed considerably
+   small(for you) due to your special application's behavior or
+   special hardware support for CPU cache etc.
+ - The searching cost doesn't have impact(for you) or you can make
+   the searching cost enough small by managing cpuset to compact etc.
+ - The latency is required even it sacrifices cache hit rate etc.
+   then increasing 'sched_relax_domain_level' would benefit you.
+
+
+1.9 How do I use cpusets ?
+--------------------------
+
+In order to minimize the impact of cpusets on critical kernel
+code, such as the scheduler, and due to the fact that the kernel
+does not support one task updating the memory placement of another
+task directly, the impact on a task of changing its cpuset CPU
+or Memory Node placement, or of changing to which cpuset a task
+is attached, is subtle.
+
+If a cpuset has its Memory Nodes modified, then for each task attached
+to that cpuset, the next time that the kernel attempts to allocate
+a page of memory for that task, the kernel will notice the change
+in the task's cpuset, and update its per-task memory placement to
+remain within the new cpusets memory placement.  If the task was using
+mempolicy MPOL_BIND, and the nodes to which it was bound overlap with
+its new cpuset, then the task will continue to use whatever subset
+of MPOL_BIND nodes are still allowed in the new cpuset.  If the task
+was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed
+in the new cpuset, then the task will be essentially treated as if it
+was MPOL_BIND bound to the new cpuset (even though its NUMA placement,
+as queried by get_mempolicy(), doesn't change).  If a task is moved
+from one cpuset to another, then the kernel will adjust the task's
+memory placement, as above, the next time that the kernel attempts
+to allocate a page of memory for that task.
+
+If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset
+will have its allowed CPU placement changed immediately.  Similarly,
+if a task's pid is written to another cpuset's 'tasks' file, then its
+allowed CPU placement is changed immediately.  If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
+
+In summary, the memory placement of a task whose cpuset is changed is
+updated by the kernel, on the next allocation of a page for that task,
+and the processor placement is updated immediately.
+
+Normally, once a page is allocated (given a physical page
+of main memory) then that page stays on whatever node it
+was allocated, so long as it remains allocated, even if the
+cpusets memory placement policy 'cpuset.mems' subsequently changes.
+If the cpuset flag file 'cpuset.memory_migrate' is set true, then when
+tasks are attached to that cpuset, any pages that task had
+allocated to it on nodes in its previous cpuset are migrated
+to the task's new cpuset. The relative placement of the page within
+the cpuset is preserved during these migration operations if possible.
+For example if the page was on the second valid node of the prior cpuset
+then the page will be placed on the second valid node of the new cpuset.
+
+Also if 'cpuset.memory_migrate' is set true, then if that cpuset's
+'cpuset.mems' file is modified, pages allocated to tasks in that
+cpuset, that were on nodes in the previous setting of 'cpuset.mems',
+will be moved to nodes in the new setting of 'mems.'
+Pages that were not in the task's prior cpuset, or in the cpuset's
+prior 'cpuset.mems' setting, will not be moved.
+
+There is an exception to the above.  If hotplug functionality is used
+to remove all the CPUs that are currently assigned to a cpuset,
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus.  But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching.  In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs.  When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well.  In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
+
+There is a second exception to the above.  GFP_ATOMIC requests are
+kernel internal allocations that must be satisfied, immediately.
+The kernel may drop some request, in rare cases even panic, if a
+GFP_ATOMIC alloc fails.  If the request cannot be satisfied within
+the current task's cpuset, then we relax the cpuset, and look for
+memory anywhere we can find it.  It's better to violate the cpuset
+than stress the kernel.
+
+To start a new job that is to be contained within a cpuset, the steps are:
+
+ 1) mkdir /sys/fs/cgroup/cpuset
+ 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ 3) Create the new cpuset by doing mkdir's and write's (or echo's) in
+    the /sys/fs/cgroup/cpuset virtual file system.
+ 4) Start a task that will be the "founding father" of the new job.
+ 5) Attach that task to the new cpuset by writing its pid to the
+    /sys/fs/cgroup/cpuset tasks file for that cpuset.
+ 6) fork, exec or clone the job tasks from this founding father task.
+
+For example, the following sequence of commands will setup a cpuset
+named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
+and then start a subshell 'sh' in that cpuset::
+
+  mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+  cd /sys/fs/cgroup/cpuset
+  mkdir Charlie
+  cd Charlie
+  /bin/echo 2-3 > cpuset.cpus
+  /bin/echo 1 > cpuset.mems
+  /bin/echo $$ > tasks
+  sh
+  # The subshell 'sh' is now running in cpuset Charlie
+  # The next line should display '/Charlie'
+  cat /proc/self/cpuset
+
+There are ways to query or modify cpusets:
+
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+   cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+   (http://sourceforge.net/projects/libcg/)
+ - via the python application cset.
+   (http://code.google.com/p/cpuset/)
+
+The sched_setaffinity calls can also be done at the shell prompt using
+SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
+calls can be done at the shell prompt using the numactl command
+(part of Andi Kleen's numa package).
+
+2. Usage Examples and Syntax
+============================
+
+2.1 Basic Usage
+---------------
+
+Creating, modifying, using the cpusets can be done through the cpuset
+virtual filesystem.
+
+To mount it, type:
+# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
+
+Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
+tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
+is the cpuset that holds the whole system.
+
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset::
+
+  # cd /sys/fs/cgroup/cpuset
+  # mkdir my_cpuset
+
+Now you want to do something with this cpuset::
+
+  # cd my_cpuset
+
+In this directory you can find several files::
+
+  # ls
+  cgroup.clone_children  cpuset.memory_pressure
+  cgroup.event_control   cpuset.memory_spread_page
+  cgroup.procs           cpuset.memory_spread_slab
+  cpuset.cpu_exclusive   cpuset.mems
+  cpuset.cpus            cpuset.sched_load_balance
+  cpuset.mem_exclusive   cpuset.sched_relax_domain_level
+  cpuset.mem_hardwall    notify_on_release
+  cpuset.memory_migrate  tasks
+
+Reading them will give you information about the state of this cpuset:
+the CPUs and Memory Nodes it can use, the processes that are using
+it, its properties.  By writing to these files you can manipulate
+the cpuset.
+
+Set some flags::
+
+  # /bin/echo 1 > cpuset.cpu_exclusive
+
+Add some cpus::
+
+  # /bin/echo 0-7 > cpuset.cpus
+
+Add some mems::
+
+  # /bin/echo 0-7 > cpuset.mems
+
+Now attach your shell to this cpuset::
+
+  # /bin/echo $$ > tasks
+
+You can also create cpusets inside your cpuset by using mkdir in this
+directory::
+
+  # mkdir my_sub_cs
+
+To remove a cpuset, just use rmdir::
+
+  # rmdir my_sub_cs
+
+This will fail if the cpuset is in use (has cpusets inside, or has
+processes attached).
+
+Note that for legacy reasons, the "cpuset" filesystem exists as a
+wrapper around the cgroup filesystem.
+
+The command::
+
+  mount -t cpuset X /sys/fs/cgroup/cpuset
+
+is equivalent to::
+
+  mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
+  echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
+
+2.2 Adding/removing cpus
+------------------------
+
+This is the syntax to use when writing in the cpus or mems files
+in cpuset directories::
+
+  # /bin/echo 1-4 > cpuset.cpus		-> set cpus list to cpus 1,2,3,4
+  # /bin/echo 1,2,3,4 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4
+
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset::
+
+  # /bin/echo 1-4,6 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs::
+
+  # /bin/echo "" > cpuset.cpus		-> clear cpus list
+
+2.3 Setting flags
+-----------------
+
+The syntax is very simple::
+
+  # /bin/echo 1 > cpuset.cpu_exclusive 	-> set flag 'cpuset.cpu_exclusive'
+  # /bin/echo 0 > cpuset.cpu_exclusive 	-> unset flag 'cpuset.cpu_exclusive'
+
+2.4 Attaching processes
+-----------------------
+
+::
+
+  # /bin/echo PID > tasks
+
+Note that it is PID, not PIDs. You can only attach ONE task at a time.
+If you have several tasks to attach, you have to do it one after another::
+
+  # /bin/echo PID1 > tasks
+  # /bin/echo PID2 > tasks
+	...
+  # /bin/echo PIDn > tasks
+
+
+3. Questions
+============
+
+Q:
+   what's up with this '/bin/echo' ?
+
+A:
+   bash's builtin 'echo' command does not check calls to write() against
+   errors. If you use it in the cpuset file system, you won't be
+   able to tell whether a command succeeded or failed.
+
+Q:
+   When I attach processes, only the first of the line gets really attached !
+
+A:
+   We can only return one error code per call to write(). So you should also
+   put only ONE pid.
+
+4. Contact
+==========
+
+Web: http://www.bullopensource.org/cpuset
diff --git a/Documentation/admin-guide/cgroup-v1/devices.rst b/Documentation/admin-guide/cgroup-v1/devices.rst
new file mode 100644
index 000000000..e18867839
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/devices.rst
@@ -0,0 +1,132 @@
+===========================
+Device Whitelist Controller
+===========================
+
+1. Description
+==============
+
+Implement a cgroup to track and enforce open and mknod restrictions
+on device files.  A device cgroup associates a device access
+whitelist with each cgroup.  A whitelist entry has 4 fields.
+'type' is a (all), c (char), or b (block).  'all' means it applies
+to all types and all major and minor numbers.  Major and minor are
+either an integer or * for all.  Access is a composition of r
+(read), w (write), and m (mknod).
+
+The root device cgroup starts with rwm to 'all'.  A child device
+cgroup gets a copy of the parent.  Administrators can then remove
+devices from the whitelist or add new entries.  A child cgroup can
+never receive a device access which is denied by its parent.
+
+2. User Interface
+=================
+
+An entry is added using devices.allow, and removed using
+devices.deny.  For instance::
+
+	echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
+
+allows cgroup 1 to read and mknod the device usually known as
+/dev/null.  Doing::
+
+	echo a > /sys/fs/cgroup/1/devices.deny
+
+will remove the default 'a *:* rwm' entry. Doing::
+
+	echo a > /sys/fs/cgroup/1/devices.allow
+
+will add the 'a *:* rwm' entry to the whitelist.
+
+3. Security
+===========
+
+Any task can move itself between cgroups.  This clearly won't
+suffice, but we can decide the best way to adequately restrict
+movement as people get some experience with this.  We may just want
+to require CAP_SYS_ADMIN, which at least is a separate bit from
+CAP_MKNOD.  We may want to just refuse moving to a cgroup which
+isn't a descendant of the current one.  Or we may want to use
+CAP_MAC_ADMIN, since we really are trying to lock down root.
+
+CAP_SYS_ADMIN is needed to modify the whitelist or move another
+task to a new cgroup.  (Again we'll probably want to change that).
+
+A cgroup may not be granted more permissions than the cgroup's
+parent has.
+
+4. Hierarchy
+============
+
+device cgroups maintain hierarchy by making sure a cgroup never has more
+access permissions than its parent.  Every time an entry is written to
+a cgroup's devices.deny file, all its children will have that entry removed
+from their whitelist and all the locally set whitelist entries will be
+re-evaluated.  In case one of the locally set whitelist entries would provide
+more access than the cgroup's parent, it'll be removed from the whitelist.
+
+Example::
+
+      A
+     / \
+        B
+
+    group        behavior	exceptions
+    A            allow		"b 8:* rwm", "c 116:1 rw"
+    B            deny		"c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm"
+
+If a device is denied in group A::
+
+	# echo "c 116:* r" > A/devices.deny
+
+it'll propagate down and after revalidating B's entries, the whitelist entry
+"c 116:2 rwm" will be removed::
+
+    group        whitelist entries                        denied devices
+    A            all                                      "b 8:* rwm", "c 116:* rw"
+    B            "c 1:3 rwm", "b 3:* rwm"                 all the rest
+
+In case parent's exceptions change and local exceptions are not allowed
+anymore, they'll be deleted.
+
+Notice that new whitelist entries will not be propagated::
+
+      A
+     / \
+        B
+
+    group        whitelist entries                        denied devices
+    A            "c 1:3 rwm", "c 1:5 r"                   all the rest
+    B            "c 1:3 rwm", "c 1:5 r"                   all the rest
+
+when adding ``c *:3 rwm``::
+
+	# echo "c *:3 rwm" >A/devices.allow
+
+the result::
+
+    group        whitelist entries                        denied devices
+    A            "c *:3 rwm", "c 1:5 r"                   all the rest
+    B            "c 1:3 rwm", "c 1:5 r"                   all the rest
+
+but now it'll be possible to add new entries to B::
+
+	# echo "c 2:3 rwm" >B/devices.allow
+	# echo "c 50:3 r" >B/devices.allow
+
+or even::
+
+	# echo "c *:3 rwm" >B/devices.allow
+
+Allowing or denying all by writing 'a' to devices.allow or devices.deny will
+not be possible once the device cgroups has children.
+
+4.1 Hierarchy (internal implementation)
+---------------------------------------
+
+device cgroups is implemented internally using a behavior (ALLOW, DENY) and a
+list of exceptions.  The internal state is controlled using the same user
+interface to preserve compatibility with the previous whitelist-only
+implementation.  Removal or addition of exceptions that will reduce the access
+to devices will be propagated down the hierarchy.
+For every propagated exception, the effective rules will be re-evaluated based
+on current parent's access rules.
diff --git a/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst b/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst
new file mode 100644
index 000000000..582d3427d
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst
@@ -0,0 +1,127 @@
+==============
+Cgroup Freezer
+==============
+
+The cgroup freezer is useful to batch job management system which start
+and stop sets of tasks in order to schedule the resources of a machine
+according to the desires of a system administrator. This sort of program
+is often used on HPC clusters to schedule access to the cluster as a
+whole. The cgroup freezer uses cgroups to describe the set of tasks to
+be started/stopped by the batch job management system. It also provides
+a means to start and stop the tasks composing the job.
+
+The cgroup freezer will also be useful for checkpointing running groups
+of tasks. The freezer allows the checkpoint code to obtain a consistent
+image of the tasks by attempting to force the tasks in a cgroup into a
+quiescent state. Once the tasks are quiescent another task can
+walk /proc or invoke a kernel interface to gather information about the
+quiesced tasks. Checkpointed tasks can be restarted later should a
+recoverable error occur. This also allows the checkpointed tasks to be
+migrated between nodes in a cluster by copying the gathered information
+to another node and restarting the tasks there.
+
+Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping
+and resuming tasks in userspace. Both of these signals are observable
+from within the tasks we wish to freeze. While SIGSTOP cannot be caught,
+blocked, or ignored it can be seen by waiting or ptracing parent tasks.
+SIGCONT is especially unsuitable since it can be caught by the task. Any
+programs designed to watch for SIGSTOP and SIGCONT could be broken by
+attempting to use SIGSTOP and SIGCONT to stop and resume tasks. We can
+demonstrate this problem using nested bash shells::
+
+	$ echo $$
+	16644
+	$ bash
+	$ echo $$
+	16690
+
+	From a second, unrelated bash shell:
+	$ kill -SIGSTOP 16690
+	$ kill -SIGCONT 16690
+
+	<at this point 16690 exits and causes 16644 to exit too>
+
+This happens because bash can observe both signals and choose how it
+responds to them.
+
+Another example of a program which catches and responds to these
+signals is gdb. In fact any program designed to use ptrace is likely to
+have a problem with this method of stopping and resuming tasks.
+
+In contrast, the cgroup freezer uses the kernel freezer code to
+prevent the freeze/unfreeze cycle from becoming visible to the tasks
+being frozen. This allows the bash example above and gdb to run as
+expected.
+
+The cgroup freezer is hierarchical. Freezing a cgroup freezes all
+tasks belonging to the cgroup and all its descendant cgroups. Each
+cgroup has its own state (self-state) and the state inherited from the
+parent (parent-state). Iff both states are THAWED, the cgroup is
+THAWED.
+
+The following cgroupfs files are created by cgroup freezer.
+
+* freezer.state: Read-write.
+
+  When read, returns the effective state of the cgroup - "THAWED",
+  "FREEZING" or "FROZEN". This is the combined self and parent-states.
+  If any is freezing, the cgroup is freezing (FREEZING or FROZEN).
+
+  FREEZING cgroup transitions into FROZEN state when all tasks
+  belonging to the cgroup and its descendants become frozen. Note that
+  a cgroup reverts to FREEZING from FROZEN after a new task is added
+  to the cgroup or one of its descendant cgroups until the new task is
+  frozen.
+
+  When written, sets the self-state of the cgroup. Two values are
+  allowed - "FROZEN" and "THAWED". If FROZEN is written, the cgroup,
+  if not already freezing, enters FREEZING state along with all its
+  descendant cgroups.
+
+  If THAWED is written, the self-state of the cgroup is changed to
+  THAWED.  Note that the effective state may not change to THAWED if
+  the parent-state is still freezing. If a cgroup's effective state
+  becomes THAWED, all its descendants which are freezing because of
+  the cgroup also leave the freezing state.
+
+* freezer.self_freezing: Read only.
+
+  Shows the self-state. 0 if the self-state is THAWED; otherwise, 1.
+  This value is 1 iff the last write to freezer.state was "FROZEN".
+
+* freezer.parent_freezing: Read only.
+
+  Shows the parent-state.  0 if none of the cgroup's ancestors is
+  frozen; otherwise, 1.
+
+The root cgroup is non-freezable and the above interface files don't
+exist.
+
+* Examples of usage::
+
+   # mkdir /sys/fs/cgroup/freezer
+   # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
+   # mkdir /sys/fs/cgroup/freezer/0
+   # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
+
+to get status of the freezer subsystem::
+
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
+   THAWED
+
+to freeze all tasks in the container::
+
+   # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
+   FREEZING
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
+   FROZEN
+
+to unfreeze all tasks in the container::
+
+   # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
+   THAWED
+
+This is the basic mechanism which should do the right thing for user space task
+in a simple scenario.
diff --git a/Documentation/admin-guide/cgroup-v1/hugetlb.rst b/Documentation/admin-guide/cgroup-v1/hugetlb.rst
new file mode 100644
index 000000000..0fa724d82
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/hugetlb.rst
@@ -0,0 +1,135 @@
+==================
+HugeTLB Controller
+==================
+
+HugeTLB controller can be created by first mounting the cgroup filesystem.
+
+# mount -t cgroup -o hugetlb none /sys/fs/cgroup
+
+With the above step, the initial or the parent HugeTLB group becomes
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
+
+New groups can be created under the parent group /sys/fs/cgroup::
+
+  # cd /sys/fs/cgroup
+  # mkdir g1
+  # echo $$ > g1/tasks
+
+The above steps create a new group g1 and move the current shell
+process (bash) into it.
+
+Brief summary of control files::
+
+ hugetlb.<hugepagesize>.rsvd.limit_in_bytes            # set/show limit of "hugepagesize" hugetlb reservations
+ hugetlb.<hugepagesize>.rsvd.max_usage_in_bytes        # show max "hugepagesize" hugetlb reservations and no-reserve faults
+ hugetlb.<hugepagesize>.rsvd.usage_in_bytes            # show current reservations and no-reserve faults for "hugepagesize" hugetlb
+ hugetlb.<hugepagesize>.rsvd.failcnt                   # show the number of allocation failure due to HugeTLB reservation limit
+ hugetlb.<hugepagesize>.limit_in_bytes                 # set/show limit of "hugepagesize" hugetlb faults
+ hugetlb.<hugepagesize>.max_usage_in_bytes             # show max "hugepagesize" hugetlb  usage recorded
+ hugetlb.<hugepagesize>.usage_in_bytes                 # show current usage for "hugepagesize" hugetlb
+ hugetlb.<hugepagesize>.failcnt                        # show the number of allocation failure due to HugeTLB usage limit
+ hugetlb.<hugepagesize>.numa_stat                      # show the numa information of the hugetlb memory charged to this cgroup
+
+For a system supporting three hugepage sizes (64k, 32M and 1G), the control
+files include::
+
+  hugetlb.1GB.limit_in_bytes
+  hugetlb.1GB.max_usage_in_bytes
+  hugetlb.1GB.numa_stat
+  hugetlb.1GB.usage_in_bytes
+  hugetlb.1GB.failcnt
+  hugetlb.1GB.rsvd.limit_in_bytes
+  hugetlb.1GB.rsvd.max_usage_in_bytes
+  hugetlb.1GB.rsvd.usage_in_bytes
+  hugetlb.1GB.rsvd.failcnt
+  hugetlb.64KB.limit_in_bytes
+  hugetlb.64KB.max_usage_in_bytes
+  hugetlb.64KB.numa_stat
+  hugetlb.64KB.usage_in_bytes
+  hugetlb.64KB.failcnt
+  hugetlb.64KB.rsvd.limit_in_bytes
+  hugetlb.64KB.rsvd.max_usage_in_bytes
+  hugetlb.64KB.rsvd.usage_in_bytes
+  hugetlb.64KB.rsvd.failcnt
+  hugetlb.32MB.limit_in_bytes
+  hugetlb.32MB.max_usage_in_bytes
+  hugetlb.32MB.numa_stat
+  hugetlb.32MB.usage_in_bytes
+  hugetlb.32MB.failcnt
+  hugetlb.32MB.rsvd.limit_in_bytes
+  hugetlb.32MB.rsvd.max_usage_in_bytes
+  hugetlb.32MB.rsvd.usage_in_bytes
+  hugetlb.32MB.rsvd.failcnt
+
+
+1. Page fault accounting
+
+hugetlb.<hugepagesize>.limit_in_bytes
+hugetlb.<hugepagesize>.max_usage_in_bytes
+hugetlb.<hugepagesize>.usage_in_bytes
+hugetlb.<hugepagesize>.failcnt
+
+The HugeTLB controller allows users to limit the HugeTLB usage (page fault) per
+control group and enforces the limit during page fault. Since HugeTLB
+doesn't support page reclaim, enforcing the limit at page fault time implies
+that, the application will get SIGBUS signal if it tries to fault in HugeTLB
+pages beyond its limit. Therefore the application needs to know exactly how many
+HugeTLB pages it uses before hand, and the sysadmin needs to make sure that
+there are enough available on the machine for all the users to avoid processes
+getting SIGBUS.
+
+
+2. Reservation accounting
+
+hugetlb.<hugepagesize>.rsvd.limit_in_bytes
+hugetlb.<hugepagesize>.rsvd.max_usage_in_bytes
+hugetlb.<hugepagesize>.rsvd.usage_in_bytes
+hugetlb.<hugepagesize>.rsvd.failcnt
+
+The HugeTLB controller allows to limit the HugeTLB reservations per control
+group and enforces the controller limit at reservation time and at the fault of
+HugeTLB memory for which no reservation exists. Since reservation limits are
+enforced at reservation time (on mmap or shget), reservation limits never causes
+the application to get SIGBUS signal if the memory was reserved before hand. For
+MAP_NORESERVE allocations, the reservation limit behaves the same as the fault
+limit, enforcing memory usage at fault time and causing the application to
+receive a SIGBUS if it's crossing its limit.
+
+Reservation limits are superior to page fault limits described above, since
+reservation limits are enforced at reservation time (on mmap or shget), and
+never causes the application to get SIGBUS signal if the memory was reserved
+before hand. This allows for easier fallback to alternatives such as
+non-HugeTLB memory for example. In the case of page fault accounting, it's very
+hard to avoid processes getting SIGBUS since the sysadmin needs precisely know
+the HugeTLB usage of all the tasks in the system and make sure there is enough
+pages to satisfy all requests. Avoiding tasks getting SIGBUS on overcommited
+systems is practically impossible with page fault accounting.
+
+
+3. Caveats with shared memory
+
+For shared HugeTLB memory, both HugeTLB reservation and page faults are charged
+to the first task that causes the memory to be reserved or faulted, and all
+subsequent uses of this reserved or faulted memory is done without charging.
+
+Shared HugeTLB memory is only uncharged when it is unreserved or deallocated.
+This is usually when the HugeTLB file is deleted, and not when the task that
+caused the reservation or fault has exited.
+
+
+4. Caveats with HugeTLB cgroup offline.
+
+When a HugeTLB cgroup goes offline with some reservations or faults still
+charged to it, the behavior is as follows:
+
+- The fault charges are charged to the parent HugeTLB cgroup (reparented),
+- the reservation charges remain on the offline HugeTLB cgroup.
+
+This means that if a HugeTLB cgroup gets offlined while there is still HugeTLB
+reservations charged to it, that cgroup persists as a zombie until all HugeTLB
+reservations are uncharged. HugeTLB reservations behave in this manner to match
+the memory controller whose cgroups also persist as zombie until all charged
+memory is uncharged. Also, the tracking of HugeTLB reservations is a bit more
+complex compared to the tracking of HugeTLB faults, so it is significantly
+harder to reparent reservations at offline time.
diff --git a/Documentation/admin-guide/cgroup-v1/index.rst b/Documentation/admin-guide/cgroup-v1/index.rst
new file mode 100644
index 000000000..99fbc8a64
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/index.rst
@@ -0,0 +1,31 @@
+.. _cgroup-v1:
+
+========================
+Control Groups version 1
+========================
+
+.. toctree::
+    :maxdepth: 1
+
+    cgroups
+
+    blkio-controller
+    cpuacct
+    cpusets
+    devices
+    freezer-subsystem
+    hugetlb
+    memcg_test
+    memory
+    misc
+    net_cls
+    net_prio
+    pids
+    rdma
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/admin-guide/cgroup-v1/memcg_test.rst b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
new file mode 100644
index 000000000..a402359ab
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
@@ -0,0 +1,344 @@
+=====================================================
+Memory Resource Controller(Memcg) Implementation Memo
+=====================================================
+
+Last Updated: 2010/2
+
+Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34).
+
+Because VM is getting complex (one of reasons is memcg...), memcg's behavior
+is complex. This is a document for memcg's internal behavior.
+Please note that implementation details can be changed.
+
+(*) Topics on API should be in Documentation/admin-guide/cgroup-v1/memory.rst)
+
+0. How to record usage ?
+========================
+
+   2 objects are used.
+
+   page_cgroup ....an object per page.
+
+	Allocated at boot or memory hotplug. Freed at memory hot removal.
+
+   swap_cgroup ... an entry per swp_entry.
+
+	Allocated at swapon(). Freed at swapoff().
+
+   The page_cgroup has USED bit and double count against a page_cgroup never
+   occurs. swap_cgroup is used only when a charged page is swapped-out.
+
+1. Charge
+=========
+
+   a page/swp_entry may be charged (usage += PAGE_SIZE) at
+
+	mem_cgroup_try_charge()
+
+2. Uncharge
+===========
+
+  a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by
+
+	mem_cgroup_uncharge()
+	  Called when a page's refcount goes down to 0.
+
+	mem_cgroup_uncharge_swap()
+	  Called when swp_entry's refcnt goes down to 0. A charge against swap
+	  disappears.
+
+3. charge-commit-cancel
+=======================
+
+	Memcg pages are charged in two steps:
+
+		- mem_cgroup_try_charge()
+		- mem_cgroup_commit_charge() or mem_cgroup_cancel_charge()
+
+	At try_charge(), there are no flags to say "this page is charged".
+	at this point, usage += PAGE_SIZE.
+
+	At commit(), the page is associated with the memcg.
+
+	At cancel(), simply usage -= PAGE_SIZE.
+
+Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
+
+4. Anonymous
+============
+
+	Anonymous page is newly allocated at
+		  - page fault into MAP_ANONYMOUS mapping.
+		  - Copy-On-Write.
+
+	4.1 Swap-in.
+	At swap-in, the page is taken from swap-cache. There are 2 cases.
+
+	(a) If the SwapCache is newly allocated and read, it has no charges.
+	(b) If the SwapCache has been mapped by processes, it has been
+	    charged already.
+
+	4.2 Swap-out.
+	At swap-out, typical state transition is below.
+
+	(a) add to swap cache. (marked as SwapCache)
+	    swp_entry's refcnt += 1.
+	(b) fully unmapped.
+	    swp_entry's refcnt += # of ptes.
+	(c) write back to swap.
+	(d) delete from swap cache. (remove from SwapCache)
+	    swp_entry's refcnt -= 1.
+
+
+	Finally, at task exit,
+	(e) zap_pte() is called and swp_entry's refcnt -=1 -> 0.
+
+5. Page Cache
+=============
+
+	Page Cache is charged at
+	- filemap_add_folio().
+
+	The logic is very clear. (About migration, see below)
+
+	Note:
+	  __remove_from_page_cache() is called by remove_from_page_cache()
+	  and __remove_mapping().
+
+6. Shmem(tmpfs) Page Cache
+===========================
+
+	The best way to understand shmem's page state transition is to read
+	mm/shmem.c.
+
+	But brief explanation of the behavior of memcg around shmem will be
+	helpful to understand the logic.
+
+	Shmem's page (just leaf page, not direct/indirect block) can be on
+
+		- radix-tree of shmem's inode.
+		- SwapCache.
+		- Both on radix-tree and SwapCache. This happens at swap-in
+		  and swap-out,
+
+	It's charged when...
+
+	- A new page is added to shmem's radix-tree.
+	- A swp page is read. (move a charge from swap_cgroup to page_cgroup)
+
+7. Page Migration
+=================
+
+	mem_cgroup_migrate()
+
+8. LRU
+======
+	Each memcg has its own vector of LRUs (inactive anon, active anon,
+	inactive file, active file, unevictable) of pages from each node,
+	each LRU handled under a single lru_lock for that memcg and node.
+
+9. Typical Tests.
+=================
+
+ Tests for racy cases.
+
+9.1 Small limit to memcg.
+-------------------------
+
+	When you do test to do racy case, it's good test to set memcg's limit
+	to be very small rather than GB. Many races found in the test under
+	xKB or xxMB limits.
+
+	(Memory behavior under GB and Memory behavior under MB shows very
+	different situation.)
+
+9.2 Shmem
+---------
+
+	Historically, memcg's shmem handling was poor and we saw some amount
+	of troubles here. This is because shmem is page-cache but can be
+	SwapCache. Test with shmem/tmpfs is always good test.
+
+9.3 Migration
+-------------
+
+	For NUMA, migration is an another special case. To do easy test, cpuset
+	is useful. Following is a sample script to do migration::
+
+		mount -t cgroup -o cpuset none /opt/cpuset
+
+		mkdir /opt/cpuset/01
+		echo 1 > /opt/cpuset/01/cpuset.cpus
+		echo 0 > /opt/cpuset/01/cpuset.mems
+		echo 1 > /opt/cpuset/01/cpuset.memory_migrate
+		mkdir /opt/cpuset/02
+		echo 1 > /opt/cpuset/02/cpuset.cpus
+		echo 1 > /opt/cpuset/02/cpuset.mems
+		echo 1 > /opt/cpuset/02/cpuset.memory_migrate
+
+	In above set, when you moves a task from 01 to 02, page migration to
+	node 0 to node 1 will occur. Following is a script to migrate all
+	under cpuset.::
+
+		--
+		move_task()
+		{
+		for pid in $1
+		do
+			/bin/echo $pid >$2/tasks 2>/dev/null
+			echo -n $pid
+			echo -n " "
+		done
+		echo END
+		}
+
+		G1_TASK=`cat ${G1}/tasks`
+		G2_TASK=`cat ${G2}/tasks`
+		move_task "${G1_TASK}" ${G2} &
+		--
+
+9.4 Memory hotplug
+------------------
+
+	memory hotplug test is one of good test.
+
+	to offline memory, do following::
+
+		# echo offline > /sys/devices/system/memory/memoryXXX/state
+
+	(XXX is the place of memory)
+
+	This is an easy way to test page migration, too.
+
+9.5 nested cgroups
+------------------
+
+	Use tests like the following for testing nested cgroups::
+
+		mkdir /opt/cgroup/01/child_a
+		mkdir /opt/cgroup/01/child_b
+
+		set limit to 01.
+		add limit to 01/child_b
+		run jobs under child_a and child_b
+
+	create/delete following groups at random while jobs are running::
+
+		/opt/cgroup/01/child_a/child_aa
+		/opt/cgroup/01/child_b/child_bb
+		/opt/cgroup/01/child_c
+
+	running new jobs in new group is also good.
+
+9.6 Mount with other subsystems
+-------------------------------
+
+	Mounting with other subsystems is a good test because there is a
+	race and lock dependency with other cgroup subsystems.
+
+	example::
+
+		# mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
+
+	and do task move, mkdir, rmdir etc...under this.
+
+9.7 swapoff
+-----------
+
+	Besides management of swap is one of complicated parts of memcg,
+	call path of swap-in at swapoff is not same as usual swap-in path..
+	It's worth to be tested explicitly.
+
+	For example, test like following is good:
+
+	(Shell-A)::
+
+		# mount -t cgroup none /cgroup -o memory
+		# mkdir /cgroup/test
+		# echo 40M > /cgroup/test/memory.limit_in_bytes
+		# echo 0 > /cgroup/test/tasks
+
+	Run malloc(100M) program under this. You'll see 60M of swaps.
+
+	(Shell-B)::
+
+		# move all tasks in /cgroup/test to /cgroup
+		# /sbin/swapoff -a
+		# rmdir /cgroup/test
+		# kill malloc task.
+
+	Of course, tmpfs v.s. swapoff test should be tested, too.
+
+9.8 OOM-Killer
+--------------
+
+	Out-of-memory caused by memcg's limit will kill tasks under
+	the memcg. When hierarchy is used, a task under hierarchy
+	will be killed by the kernel.
+
+	In this case, panic_on_oom shouldn't be invoked and tasks
+	in other groups shouldn't be killed.
+
+	It's not difficult to cause OOM under memcg as following.
+
+	Case A) when you can swapoff::
+
+		#swapoff -a
+		#echo 50M > /memory.limit_in_bytes
+
+	run 51M of malloc
+
+	Case B) when you use mem+swap limitation::
+
+		#echo 50M > memory.limit_in_bytes
+		#echo 50M > memory.memsw.limit_in_bytes
+
+	run 51M of malloc
+
+9.9 Move charges at task migration
+----------------------------------
+
+	Charges associated with a task can be moved along with task migration.
+
+	(Shell-A)::
+
+		#mkdir /cgroup/A
+		#echo $$ >/cgroup/A/tasks
+
+	run some programs which uses some amount of memory in /cgroup/A.
+
+	(Shell-B)::
+
+		#mkdir /cgroup/B
+		#echo 1 >/cgroup/B/memory.move_charge_at_immigrate
+		#echo "pid of the program running in group A" >/cgroup/B/tasks
+
+	You can see charges have been moved by reading ``*.usage_in_bytes`` or
+	memory.stat of both A and B.
+
+	See 8.2 of Documentation/admin-guide/cgroup-v1/memory.rst to see what value should
+	be written to move_charge_at_immigrate.
+
+9.10 Memory thresholds
+----------------------
+
+	Memory controller implements memory thresholds using cgroups notification
+	API. You can use tools/cgroup/cgroup_event_listener.c to test it.
+
+	(Shell-A) Create cgroup and run event listener::
+
+		# mkdir /cgroup/A
+		# ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+
+	(Shell-B) Add task to cgroup and try to allocate and free memory::
+
+		# echo $$ >/cgroup/A/tasks
+		# a="$(dd if=/dev/zero bs=1M count=10)"
+		# a=
+
+	You will see message from cgroup_event_listener every time you cross
+	the thresholds.
+
+	Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds.
+
+	It's good idea to test root cgroup as well.
diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
new file mode 100644
index 000000000..40164f288
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -0,0 +1,993 @@
+==========================
+Memory Resource Controller
+==========================
+
+NOTE:
+      This document is hopelessly outdated and it asks for a complete
+      rewrite. It still contains a useful information so we are keeping it
+      here but make sure to check the current code if you need a deeper
+      understanding.
+
+NOTE:
+      The Memory Resource Controller has generically been referred to as the
+      memory controller in this document. Do not confuse memory controller
+      used here with the memory controller that is used in hardware.
+
+(For editors) In this document:
+      When we mention a cgroup (cgroupfs's directory) with memory controller,
+      we call it "memory cgroup". When you see git-log and source code, you'll
+      see patch's title and function names tend to use "memcg".
+      In this document, we avoid using it.
+
+Benefits and Purpose of the memory controller
+=============================================
+
+The memory controller isolates the memory behaviour of a group of tasks
+from the rest of the system. The article on LWN [12] mentions some probable
+uses of the memory controller. The memory controller can be used to
+
+a. Isolate an application or a group of applications
+   Memory-hungry applications can be isolated and limited to a smaller
+   amount of memory.
+b. Create a cgroup with a limited amount of memory; this can be used
+   as a good alternative to booting with mem=XXXX.
+c. Virtualization solutions can control the amount of memory they want
+   to assign to a virtual machine instance.
+d. A CD/DVD burner could control the amount of memory used by the
+   rest of the system to ensure that burning does not fail due to lack
+   of available memory.
+e. There are several other use cases; find one or use the controller just
+   for fun (to learn and hack on the VM subsystem).
+
+Current Status: linux-2.6.34-mmotm(development version of 2010/April)
+
+Features:
+
+ - accounting anonymous pages, file caches, swap caches usage and limiting them.
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
+ - optionally, memory+swap usage can be accounted and limited.
+ - hierarchical accounting
+ - soft limit
+ - moving (recharging) account at moving a task is selectable.
+ - usage threshold notifier
+ - memory pressure notifier
+ - oom-killer disable knob and oom-notifier
+ - Root cgroup has no limit controls.
+
+ Kernel memory support is a work in progress, and the current version provides
+ basically functionality. (See Section 2.7)
+
+Brief summary of control files.
+
+==================================== ==========================================
+ tasks				     attach a task(thread) and show list of
+				     threads
+ cgroup.procs			     show list of processes
+ cgroup.event_control		     an interface for event_fd()
+				     This knob is not available on CONFIG_PREEMPT_RT systems.
+ memory.usage_in_bytes		     show current usage for memory
+				     (See 5.5 for details)
+ memory.memsw.usage_in_bytes	     show current usage for memory+Swap
+				     (See 5.5 for details)
+ memory.limit_in_bytes		     set/show limit of memory usage
+ memory.memsw.limit_in_bytes	     set/show limit of memory+Swap usage
+ memory.failcnt			     show the number of memory usage hits limits
+ memory.memsw.failcnt		     show the number of memory+Swap hits limits
+ memory.max_usage_in_bytes	     show max memory usage recorded
+ memory.memsw.max_usage_in_bytes     show max memory+Swap usage recorded
+ memory.soft_limit_in_bytes	     set/show soft limit of memory usage
+				     This knob is not available on CONFIG_PREEMPT_RT systems.
+ memory.stat			     show various statistics
+ memory.use_hierarchy		     set/show hierarchical account enabled
+                                     This knob is deprecated and shouldn't be
+                                     used.
+ memory.force_empty		     trigger forced page reclaim
+ memory.pressure_level		     set memory pressure notifications
+ memory.swappiness		     set/show swappiness parameter of vmscan
+				     (See sysctl's vm.swappiness)
+ memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
+ memory.oom_control		     set/show oom controls.
+ memory.numa_stat		     show the number of memory usage per numa
+				     node
+ memory.kmem.limit_in_bytes          Deprecated knob to set and read the kernel
+                                     memory hard limit. Kernel hard limit is not
+                                     supported since 5.16. Writing any value to
+                                     do file will not have any effect same as if
+                                     nokmem kernel parameter was specified.
+                                     Kernel memory is still charged and reported
+                                     by memory.kmem.usage_in_bytes.
+ memory.kmem.usage_in_bytes          show current kernel memory allocation
+ memory.kmem.failcnt                 show the number of kernel memory usage
+				     hits limits
+ memory.kmem.max_usage_in_bytes      show max kernel memory usage recorded
+
+ memory.kmem.tcp.limit_in_bytes      set/show hard limit for tcp buf memory
+ memory.kmem.tcp.usage_in_bytes      show current tcp buf memory allocation
+ memory.kmem.tcp.failcnt             show the number of tcp buf memory usage
+				     hits limits
+ memory.kmem.tcp.max_usage_in_bytes  show max tcp buf memory usage recorded
+==================================== ==========================================
+
+1. History
+==========
+
+The memory controller has a long history. A request for comments for the memory
+controller was posted by Balbir Singh [1]. At the time the RFC was posted
+there were several implementations for memory control. The goal of the
+RFC was to build consensus and agreement for the minimal features required
+for memory control. The first RSS controller was posted by Balbir Singh[2]
+in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the
+RSS controller. At OLS, at the resource management BoF, everyone suggested
+that we handle both page cache and RSS together. Another request was raised
+to allow user space handling of OOM. The current memory controller is
+at version 6; it combines both mapped (RSS) and unmapped Page
+Cache Control [11].
+
+2. Memory Control
+=================
+
+Memory is a unique resource in the sense that it is present in a limited
+amount. If a task requires a lot of CPU processing, the task can spread
+its processing over a period of hours, days, months or years, but with
+memory, the same physical memory needs to be reused to accomplish the task.
+
+The memory controller implementation has been divided into phases. These
+are:
+
+1. Memory controller
+2. mlock(2) controller
+3. Kernel user memory accounting and slab control
+4. user mappings length controller
+
+The memory controller is the first controller developed.
+
+2.1. Design
+-----------
+
+The core of the design is a counter called the page_counter. The
+page_counter tracks the current memory usage and limit of the group of
+processes associated with the controller. Each cgroup has a memory controller
+specific data structure (mem_cgroup) associated with it.
+
+2.2. Accounting
+---------------
+
+::
+
+		+--------------------+
+		|  mem_cgroup        |
+		|  (page_counter)    |
+		+--------------------+
+		 /            ^      \
+		/             |       \
+           +---------------+  |        +---------------+
+           | mm_struct     |  |....    | mm_struct     |
+           |               |  |        |               |
+           +---------------+  |        +---------------+
+                              |
+                              + --------------+
+                                              |
+           +---------------+           +------+--------+
+           | page          +---------->  page_cgroup|
+           |               |           |               |
+           +---------------+           +---------------+
+
+             (Figure 1: Hierarchy of Accounting)
+
+
+Figure 1 shows the important aspects of the controller
+
+1. Accounting happens per cgroup
+2. Each mm_struct knows about which cgroup it belongs to
+3. Each page has a pointer to the page_cgroup, which in turn knows the
+   cgroup it belongs to
+
+The accounting is done as follows: mem_cgroup_charge_common() is invoked to
+set up the necessary data structures and check if the cgroup that is being
+charged is over its limit. If it is, then reclaim is invoked on the cgroup.
+More details can be found in the reclaim section of this document.
+If everything goes well, a page meta-data-structure called page_cgroup is
+updated. page_cgroup has its own LRU on cgroup.
+(*) page_cgroup structure is allocated at boot/memory-hotplug time.
+
+2.2.1 Accounting details
+------------------------
+
+All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
+Some pages which are never reclaimable and will not be on the LRU
+are not accounted. We just account pages under usual VM management.
+
+RSS pages are accounted at page_fault unless they've already been accounted
+for earlier. A file page will be accounted for as Page Cache when it's
+inserted into inode (radix-tree). While it's mapped into the page tables of
+processes, duplicate accounting is carefully avoided.
+
+An RSS page is unaccounted when it's fully unmapped. A PageCache page is
+unaccounted when it's removed from radix-tree. Even if RSS pages are fully
+unmapped (by kswapd), they may exist as SwapCache in the system until they
+are really freed. Such SwapCaches are also accounted.
+A swapped-in page is accounted after adding into swapcache.
+
+Note: The kernel does swapin-readahead and reads multiple swaps at once.
+Since page's memcg recorded into swap whatever memsw enabled, the page will
+be accounted after swapin.
+
+At page migration, accounting information is kept.
+
+Note: we just account pages-on-LRU because our purpose is to control amount
+of used pages; not-on-LRU pages tend to be out-of-control from VM view.
+
+2.3 Shared Page Accounting
+--------------------------
+
+Shared pages are accounted on the basis of the first touch approach. The
+cgroup that first touches a page is accounted for the page. The principle
+behind this approach is that a cgroup that aggressively uses a shared
+page will eventually get charged for it (once it is uncharged from
+the cgroup that brought it in -- this will happen on memory pressure).
+
+But see section 8.2: when moving a task to another cgroup, its pages may
+be recharged to the new cgroup, if move_charge_at_immigrate has been chosen.
+
+2.4 Swap Extension
+--------------------------------------
+
+Swap usage is always recorded for each of cgroup. Swap Extension allows you to
+read and limit it.
+
+When CONFIG_SWAP is enabled, following files are added.
+
+ - memory.memsw.usage_in_bytes.
+ - memory.memsw.limit_in_bytes.
+
+memsw means memory+swap. Usage of memory+swap is limited by
+memsw.limit_in_bytes.
+
+Example: Assume a system with 4G of swap. A task which allocates 6G of memory
+(by mistake) under 2G memory limitation will use all swap.
+In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap.
+By using the memsw limit, you can avoid system OOM which can be caused by swap
+shortage.
+
+**why 'memory+swap' rather than swap**
+
+The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
+to move account from memory to swap...there is no change in usage of
+memory+swap. In other words, when we want to limit the usage of swap without
+affecting global LRU, memory+swap limit is better than just limiting swap from
+an OS point of view.
+
+**What happens when a cgroup hits memory.memsw.limit_in_bytes**
+
+When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
+in this cgroup. Then, swap-out will not be done by cgroup routine and file
+caches are dropped. But as mentioned above, global LRU can do swapout memory
+from it for sanity of the system's memory management state. You can't forbid
+it by cgroup.
+
+2.5 Reclaim
+-----------
+
+Each cgroup maintains a per cgroup LRU which has the same structure as
+global VM. When a cgroup goes over its limit, we first try
+to reclaim memory from the cgroup so as to make space for the new
+pages that the cgroup has touched. If the reclaim is unsuccessful,
+an OOM routine is invoked to select and kill the bulkiest task in the
+cgroup. (See 10. OOM Control below.)
+
+The reclaim algorithm has not been modified for cgroups, except that
+pages that are selected for reclaiming come from the per-cgroup LRU
+list.
+
+NOTE:
+  Reclaim does not work for the root cgroup, since we cannot set any
+  limits on the root cgroup.
+
+Note2:
+  When panic_on_oom is set to "2", the whole system will panic.
+
+When oom event notifier is registered, event will be delivered.
+(See oom_control section)
+
+2.6 Locking
+-----------
+
+Lock order is as follows:
+
+  Page lock (PG_locked bit of page->flags)
+    mm->page_table_lock or split pte_lock
+      lock_page_memcg (memcg->move_lock)
+        mapping->i_pages lock
+          lruvec->lru_lock.
+
+Per-node-per-memcgroup LRU (cgroup's private LRU) is guarded by
+lruvec->lru_lock; PG_lru bit of page->flags is cleared before
+isolating a page from its LRU under lruvec->lru_lock.
+
+2.7 Kernel Memory Extension
+-----------------------------------------------
+
+With the Kernel memory extension, the Memory Controller is able to limit
+the amount of kernel memory used by the system. Kernel memory is fundamentally
+different than user memory, since it can't be swapped out, which makes it
+possible to DoS the system by consuming too much of this precious resource.
+
+Kernel memory accounting is enabled for all memory cgroups by default. But
+it can be disabled system-wide by passing cgroup.memory=nokmem to the kernel
+at boot time. In this case, kernel memory will not be accounted at all.
+
+Kernel memory limits are not imposed for the root cgroup. Usage for the root
+cgroup may or may not be accounted. The memory used is accumulated into
+memory.kmem.usage_in_bytes, or in a separate counter when it makes sense.
+(currently only for tcp).
+
+The main "kmem" counter is fed into the main counter, so kmem charges will
+also be visible from the user counter.
+
+Currently no soft limit is implemented for kernel memory. It is future work
+to trigger slab reclaim when those limits are reached.
+
+2.7.1 Current Kernel Memory resources accounted
+-----------------------------------------------
+
+stack pages:
+  every process consumes some stack pages. By accounting into
+  kernel memory, we prevent new processes from being created when the kernel
+  memory usage is too high.
+
+slab pages:
+  pages allocated by the SLAB or SLUB allocator are tracked. A copy
+  of each kmem_cache is created every time the cache is touched by the first time
+  from inside the memcg. The creation is done lazily, so some objects can still be
+  skipped while the cache is being created. All objects in a slab page should
+  belong to the same memcg. This only fails to hold when a task is migrated to a
+  different memcg during the page allocation by the cache.
+
+sockets memory pressure:
+  some sockets protocols have memory pressure
+  thresholds. The Memory Controller allows them to be controlled individually
+  per cgroup, instead of globally.
+
+tcp memory pressure:
+  sockets memory pressure for the tcp protocol.
+
+2.7.2 Common use cases
+----------------------
+
+Because the "kmem" counter is fed to the main user counter, kernel memory can
+never be limited completely independently of user memory. Say "U" is the user
+limit, and "K" the kernel limit. There are three possible ways limits can be
+set:
+
+U != 0, K = unlimited:
+    This is the standard memcg limitation mechanism already present before kmem
+    accounting. Kernel memory is completely ignored.
+
+U != 0, K < U:
+    Kernel memory is a subset of the user memory. This setup is useful in
+    deployments where the total amount of memory per-cgroup is overcommitted.
+    Overcommitting kernel memory limits is definitely not recommended, since the
+    box can still run out of non-reclaimable memory.
+    In this case, the admin could set up K so that the sum of all groups is
+    never greater than the total memory, and freely set U at the cost of his
+    QoS.
+
+WARNING:
+    In the current implementation, memory reclaim will NOT be
+    triggered for a cgroup when it hits K while staying below U, which makes
+    this setup impractical.
+
+U != 0, K >= U:
+    Since kmem charges will also be fed to the user counter and reclaim will be
+    triggered for the cgroup for both kinds of memory. This setup gives the
+    admin a unified view of memory, and it is also useful for people who just
+    want to track kernel memory usage.
+
+3. User Interface
+=================
+
+3.0. Configuration
+------------------
+
+a. Enable CONFIG_CGROUPS
+b. Enable CONFIG_MEMCG
+
+3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
+-------------------------------------------------------------------
+
+::
+
+	# mount -t tmpfs none /sys/fs/cgroup
+	# mkdir /sys/fs/cgroup/memory
+	# mount -t cgroup none /sys/fs/cgroup/memory -o memory
+
+3.2. Make the new group and move bash into it::
+
+	# mkdir /sys/fs/cgroup/memory/0
+	# echo $$ > /sys/fs/cgroup/memory/0/tasks
+
+Since now we're in the 0 cgroup, we can alter the memory limit::
+
+	# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
+
+NOTE:
+  We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
+  mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes,
+  Gibibytes.)
+
+NOTE:
+  We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``.
+
+NOTE:
+  We cannot set limits on the root cgroup any more.
+
+::
+
+  # cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
+  4194304
+
+We can check the usage::
+
+  # cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
+  1216512
+
+A successful write to this file does not guarantee a successful setting of
+this limit to the value written into the file. This can be due to a
+number of factors, such as rounding up to page boundaries or the total
+availability of memory on the system. The user is required to re-read
+this file after a write to guarantee the value committed by the kernel::
+
+  # echo 1 > memory.limit_in_bytes
+  # cat memory.limit_in_bytes
+  4096
+
+The memory.failcnt field gives the number of times that the cgroup limit was
+exceeded.
+
+The memory.stat file gives accounting information. Now, the number of
+caches, RSS and Active pages/Inactive pages are shown.
+
+4. Testing
+==========
+
+For testing features and implementation, see memcg_test.txt.
+
+Performance test is also important. To see pure memory controller's overhead,
+testing on tmpfs will give you good numbers of small overheads.
+Example: do kernel make on tmpfs.
+
+Page-fault scalability is also important. At measuring parallel
+page fault test, multi-process test may be better than multi-thread
+test because it has noise of shared objects/status.
+
+But the above two are testing extreme situations.
+Trying usual test under memory controller is always helpful.
+
+4.1 Troubleshooting
+-------------------
+
+Sometimes a user might find that the application under a cgroup is
+terminated by the OOM killer. There are several causes for this:
+
+1. The cgroup limit is too low (just too low to do anything useful)
+2. The user is using anonymous memory and swap is turned off or too low
+
+A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of
+some of the pages cached in the cgroup (page cache pages).
+
+To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and
+seeing what happens will be helpful.
+
+4.2 Task migration
+------------------
+
+When a task migrates from one cgroup to another, its charge is not
+carried forward by default. The pages allocated from the original cgroup still
+remain charged to it, the charge is dropped when the page is freed or
+reclaimed.
+
+You can move charges of a task along with task migration.
+See 8. "Move charges at task migration"
+
+4.3 Removing a cgroup
+---------------------
+
+A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
+cgroup might have some charge associated with it, even though all
+tasks have migrated away from it. (because we charge against pages, not
+against tasks.)
+
+We move the stats to parent, and no change on the charge except uncharging
+from the child.
+
+Charges recorded in swap information is not updated at removal of cgroup.
+Recorded information is discarded and a cgroup which uses swap (swapcache)
+will be charged as a new owner of it.
+
+5. Misc. interfaces
+===================
+
+5.1 force_empty
+---------------
+  memory.force_empty interface is provided to make cgroup's memory usage empty.
+  When writing anything to this::
+
+    # echo 0 > memory.force_empty
+
+  the cgroup will be reclaimed and as many pages reclaimed as possible.
+
+  The typical use case for this interface is before calling rmdir().
+  Though rmdir() offlines memcg, but the memcg may still stay there due to
+  charged file caches. Some out-of-use page caches may keep charged until
+  memory pressure happens. If you want to avoid that, force_empty will be useful.
+
+5.2 stat file
+-------------
+
+memory.stat file includes following statistics
+
+per-memory cgroup local status
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+=============== ===============================================================
+cache		# of bytes of page cache memory.
+rss		# of bytes of anonymous and swap cache memory (includes
+		transparent hugepages).
+rss_huge	# of bytes of anonymous transparent hugepages.
+mapped_file	# of bytes of mapped file (includes tmpfs/shmem)
+pgpgin		# of charging events to the memory cgroup. The charging
+		event happens each time a page is accounted as either mapped
+		anon page(RSS) or cache page(Page Cache) to the cgroup.
+pgpgout		# of uncharging events to the memory cgroup. The uncharging
+		event happens each time a page is unaccounted from the cgroup.
+swap		# of bytes of swap usage
+dirty		# of bytes that are waiting to get written back to the disk.
+writeback	# of bytes of file/anon cache that are queued for syncing to
+		disk.
+inactive_anon	# of bytes of anonymous and swap cache memory on inactive
+		LRU list.
+active_anon	# of bytes of anonymous and swap cache memory on active
+		LRU list.
+inactive_file	# of bytes of file-backed memory on inactive LRU list.
+active_file	# of bytes of file-backed memory on active LRU list.
+unevictable	# of bytes of memory that cannot be reclaimed (mlocked etc).
+=============== ===============================================================
+
+status considering hierarchy (see memory.use_hierarchy settings)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+========================= ===================================================
+hierarchical_memory_limit # of bytes of memory limit with regard to hierarchy
+			  under which the memory cgroup is
+hierarchical_memsw_limit  # of bytes of memory+swap limit with regard to
+			  hierarchy under which memory cgroup is.
+
+total_<counter>		  # hierarchical version of <counter>, which in
+			  addition to the cgroup's own value includes the
+			  sum of all hierarchical children's values of
+			  <counter>, i.e. total_cache
+========================= ===================================================
+
+The following additional stats are dependent on CONFIG_DEBUG_VM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+========================= ========================================
+recent_rotated_anon	  VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file	  VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon	  VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file	  VM internal parameter. (see mm/vmscan.c)
+========================= ========================================
+
+Memo:
+	recent_rotated means recent frequency of LRU rotation.
+	recent_scanned means recent # of scans to LRU.
+	showing for better debug please see the code for meanings.
+
+Note:
+	Only anonymous and swap cache memory is listed as part of 'rss' stat.
+	This should not be confused with the true 'resident set size' or the
+	amount of physical memory used by the cgroup.
+
+	'rss + mapped_file" will give you resident set size of cgroup.
+
+	(Note: file and shmem may be shared among other cgroups. In that case,
+	mapped_file is accounted only when the memory cgroup is owner of page
+	cache.)
+
+5.3 swappiness
+--------------
+
+Overrides /proc/sys/vm/swappiness for the particular group. The tunable
+in the root cgroup corresponds to the global swappiness setting.
+
+Please note that unlike during the global reclaim, limit reclaim
+enforces that 0 swappiness really prevents from any swapping even if
+there is a swap storage available. This might lead to memcg OOM killer
+if there are no file pages to reclaim.
+
+5.4 failcnt
+-----------
+
+A memory cgroup provides memory.failcnt and memory.memsw.failcnt files.
+This failcnt(== failure count) shows the number of times that a usage counter
+hit its limit. When a memory cgroup hits a limit, failcnt increases and
+memory under it will be reclaimed.
+
+You can reset failcnt by writing 0 to failcnt file::
+
+	# echo 0 > .../memory.failcnt
+
+5.5 usage_in_bytes
+------------------
+
+For efficiency, as other kernel components, memory cgroup uses some optimization
+to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
+method and doesn't show 'exact' value of memory (and swap) usage, it's a fuzz
+value for efficient access. (Of course, when necessary, it's synchronized.)
+If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
+value in memory.stat(see 5.2).
+
+5.6 numa_stat
+-------------
+
+This is similar to numa_maps but operates on a per-memcg basis.  This is
+useful for providing visibility into the numa locality information within
+an memcg since the pages are allowed to be allocated from any physical
+node.  One of the use cases is evaluating application performance by
+combining this information with the application's CPU allocation.
+
+Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable"
+per-node page counts including "hierarchical_<counter>" which sums up all
+hierarchical children's values in addition to the memcg's own value.
+
+The output format of memory.numa_stat is::
+
+  total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  hierarchical_<counter>=<counter pages> N0=<node 0 pages> N1=<node 1 pages> ...
+
+The "total" count is sum of file + anon + unevictable.
+
+6. Hierarchy support
+====================
+
+The memory controller supports a deep hierarchy and hierarchical accounting.
+The hierarchy is created by creating the appropriate cgroups in the
+cgroup filesystem. Consider for example, the following cgroup filesystem
+hierarchy::
+
+	       root
+	     /  |   \
+            /	|    \
+	   a	b     c
+		      | \
+		      |  \
+		      d   e
+
+In the diagram above, with hierarchical accounting enabled, all memory
+usage of e, is accounted to its ancestors up until the root (i.e, c and root).
+If one of the ancestors goes over its limit, the reclaim algorithm reclaims
+from the tasks in the ancestor and the children of the ancestor.
+
+6.1 Hierarchical accounting and reclaim
+---------------------------------------
+
+Hierarchical accounting is enabled by default. Disabling the hierarchical
+accounting is deprecated. An attempt to do it will result in a failure
+and a warning printed to dmesg.
+
+For compatibility reasons writing 1 to memory.use_hierarchy will always pass::
+
+	# echo 1 > memory.use_hierarchy
+
+7. Soft limits
+==============
+
+Soft limits allow for greater sharing of memory. The idea behind soft limits
+is to allow control groups to use as much of the memory as needed, provided
+
+a. There is no memory contention
+b. They do not exceed their hard limit
+
+When the system detects memory contention or low memory, control groups
+are pushed back to their soft limits. If the soft limit of each control
+group is very high, they are pushed back as much as possible to make
+sure that one control group does not starve the others of memory.
+
+Please note that soft limits is a best-effort feature; it comes with
+no guarantees, but it does its best to make sure that when memory is
+heavily contended for, memory is allocated based on the soft limit
+hints/setup. Currently soft limit based reclaim is set up such that
+it gets invoked from balance_pgdat (kswapd).
+
+7.1 Interface
+-------------
+
+Soft limits can be setup by using the following commands (in this example we
+assume a soft limit of 256 MiB)::
+
+	# echo 256M > memory.soft_limit_in_bytes
+
+If we want to change this to 1G, we can at any time use::
+
+	# echo 1G > memory.soft_limit_in_bytes
+
+NOTE1:
+       Soft limits take effect over a long period of time, since they involve
+       reclaiming memory for balancing between memory cgroups
+NOTE2:
+       It is recommended to set the soft limit always below the hard limit,
+       otherwise the hard limit will take precedence.
+
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
+
+Users can move charges associated with a task along with task migration, that
+is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
+This feature is not supported in !CONFIG_MMU environments because of lack of
+page tables.
+
+8.1 Interface
+-------------
+
+This feature is disabled by default. It can be enabled (and disabled again) by
+writing to memory.move_charge_at_immigrate of the destination cgroup.
+
+If you want to enable it::
+
+	# echo (some positive value) > memory.move_charge_at_immigrate
+
+Note:
+      Each bits of move_charge_at_immigrate has its own meaning about what type
+      of charges should be moved. See 8.2 for details.
+Note:
+      Charges are moved only when you move mm->owner, in other words,
+      a leader of a thread group.
+Note:
+      If we cannot find enough space for the task in the destination cgroup, we
+      try to make space by reclaiming memory. Task migration may fail if we
+      cannot make enough space.
+Note:
+      It can take several seconds if you move charges much.
+
+And if you want disable it again::
+
+	# echo 0 > memory.move_charge_at_immigrate
+
+8.2 Type of charges which can be moved
+--------------------------------------
+
+Each bit in move_charge_at_immigrate has its own meaning about what type of
+charges should be moved. But in any case, it must be noted that an account of
+a page or a swap can be moved only when it is charged to the task's current
+(old) memory cgroup.
+
++---+--------------------------------------------------------------------------+
+|bit| what type of charges would be moved ?                                    |
++===+==========================================================================+
+| 0 | A charge of an anonymous page (or swap of it) used by the target task.   |
+|   | You must enable Swap Extension (see 2.4) to enable move of swap charges. |
++---+--------------------------------------------------------------------------+
+| 1 | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory) |
+|   | and swaps of tmpfs file) mmapped by the target task. Unlike the case of  |
+|   | anonymous pages, file pages (and swaps) in the range mmapped by the task |
+|   | will be moved even if the task hasn't done page fault, i.e. they might   |
+|   | not be the task's "RSS", but other task's "RSS" that maps the same file. |
+|   | And mapcount of the page is ignored (the page can be moved even if       |
+|   | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to    |
+|   | enable move of swap charges.                                             |
++---+--------------------------------------------------------------------------+
+
+8.3 TODO
+--------
+
+- All of moving charge operations are done under cgroup_mutex. It's not good
+  behavior to hold the mutex too long, so we may need some trick.
+
+9. Memory thresholds
+====================
+
+Memory cgroup implements memory thresholds using the cgroups notification
+API (see cgroups.txt). It allows to register multiple memory and memsw
+thresholds and gets notifications when it crosses.
+
+To register a threshold, an application must:
+
+- create an eventfd using eventfd(2);
+- open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
+- write string like "<event_fd> <fd of memory.usage_in_bytes> <threshold>" to
+  cgroup.event_control.
+
+Application will be notified through eventfd when memory usage crosses
+threshold in any direction.
+
+It's applicable for root and non-root cgroup.
+
+10. OOM Control
+===============
+
+memory.oom_control file is for OOM notification and other controls.
+
+Memory cgroup implements OOM notifier using the cgroup notification
+API (See cgroups.txt). It allows to register multiple OOM notification
+delivery and gets notification when OOM happens.
+
+To register a notifier, an application must:
+
+ - create an eventfd using eventfd(2)
+ - open memory.oom_control file
+ - write string like "<event_fd> <fd of memory.oom_control>" to
+   cgroup.event_control
+
+The application will be notified through eventfd when OOM happens.
+OOM notification doesn't work for the root cgroup.
+
+You can disable the OOM-killer by writing "1" to memory.oom_control file, as:
+
+	#echo 1 > memory.oom_control
+
+If OOM-killer is disabled, tasks under cgroup will hang/sleep
+in memory cgroup's OOM-waitqueue when they request accountable memory.
+
+For running them, you have to relax the memory cgroup's OOM status by
+
+	* enlarge limit or reduce usage.
+
+To reduce usage,
+
+	* kill some tasks.
+	* move some tasks to other group with account migration.
+	* remove some files (on tmpfs?)
+
+Then, stopped tasks will work again.
+
+At reading, current status of OOM is shown.
+
+	- oom_kill_disable 0 or 1
+	  (if 1, oom-killer is disabled)
+	- under_oom	   0 or 1
+	  (if 1, the memory cgroup is under OOM, tasks may be stopped.)
+        - oom_kill         integer counter
+          The number of processes belonging to this cgroup killed by any
+          kind of OOM killer.
+
+11. Memory Pressure
+===================
+
+The pressure level notifications can be used to monitor the memory
+allocation cost; based on the pressure, applications can implement
+different strategies of managing their memory resources. The pressure
+levels are defined as following:
+
+The "low" level means that the system is reclaiming memory for new
+allocations. Monitoring this reclaiming activity might be useful for
+maintaining cache level. Upon notification, the program (typically
+"Activity Manager") might analyze vmstat and act in advance (i.e.
+prematurely shutdown unimportant services).
+
+The "medium" level means that the system is experiencing medium memory
+pressure, the system might be making swap, paging out active file caches,
+etc. Upon this event applications may decide to further analyze
+vmstat/zoneinfo/memcg or internal memory usage statistics and free any
+resources that can be easily reconstructed or re-read from a disk.
+
+The "critical" level means that the system is actively thrashing, it is
+about to out of memory (OOM) or even the in-kernel OOM killer is on its
+way to trigger. Applications should do whatever they can to help the
+system. It might be too late to consult with vmstat or any other
+statistics, so it's advisable to take an immediate action.
+
+By default, events are propagated upward until the event is handled, i.e. the
+events are not pass-through. For example, you have three cgroups: A->B->C. Now
+you set up an event listener on cgroups A, B and C, and suppose group C
+experiences some pressure. In this situation, only group C will receive the
+notification, i.e. groups A and B will not receive it. This is done to avoid
+excessive "broadcasting" of messages, which disturbs the system and which is
+especially bad if we are low on memory or thrashing. Group B, will receive
+notification only if there are no event listers for group C.
+
+There are three optional modes that specify different propagation behavior:
+
+ - "default": this is the default behavior specified above. This mode is the
+   same as omitting the optional mode parameter, preserved by backwards
+   compatibility.
+
+ - "hierarchy": events always propagate up to the root, similar to the default
+   behavior, except that propagation continues regardless of whether there are
+   event listeners at each level, with the "hierarchy" mode. In the above
+   example, groups A, B, and C will receive notification of memory pressure.
+
+ - "local": events are pass-through, i.e. they only receive notifications when
+   memory pressure is experienced in the memcg for which the notification is
+   registered. In the above example, group C will receive notification if
+   registered for "local" notification and the group experiences memory
+   pressure. However, group B will never receive notification, regardless if
+   there is an event listener for group C or not, if group B is registered for
+   local notification.
+
+The level and event notification mode ("hierarchy" or "local", if necessary) are
+specified by a comma-delimited string, i.e. "low,hierarchy" specifies
+hierarchical, pass-through, notification for all ancestor memcgs. Notification
+that is the default, non pass-through behavior, does not specify a mode.
+"medium,local" specifies pass-through notification for the medium level.
+
+The file memory.pressure_level is only used to setup an eventfd. To
+register a notification, an application must:
+
+- create an eventfd using eventfd(2);
+- open memory.pressure_level;
+- write string as "<event_fd> <fd of memory.pressure_level> <level[,mode]>"
+  to cgroup.event_control.
+
+Application will be notified through eventfd when memory pressure is at
+the specific level (or higher). Read/write operations to
+memory.pressure_level are no implemented.
+
+Test:
+
+   Here is a small script example that makes a new cgroup, sets up a
+   memory limit, sets up a notification in the cgroup and then makes child
+   cgroup experience a critical pressure::
+
+	# cd /sys/fs/cgroup/memory/
+	# mkdir foo
+	# cd foo
+	# cgroup_event_listener memory.pressure_level low,hierarchy &
+	# echo 8000000 > memory.limit_in_bytes
+	# echo 8000000 > memory.memsw.limit_in_bytes
+	# echo $$ > tasks
+	# dd if=/dev/zero | read x
+
+   (Expect a bunch of notifications, and eventually, the oom-killer will
+   trigger.)
+
+12. TODO
+========
+
+1. Make per-cgroup scanner reclaim not-shared pages first
+2. Teach controller to account for shared-pages
+3. Start reclamation in the background when the limit is
+   not yet hit but the usage is getting closer
+
+Summary
+=======
+
+Overall, the memory controller has been a stable controller and has been
+commented and discussed quite extensively in the community.
+
+References
+==========
+
+1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/
+2. Singh, Balbir. Memory Controller (RSS Control),
+   http://lwn.net/Articles/222762/
+3. Emelianov, Pavel. Resource controllers based on process cgroups
+   https://lore.kernel.org/r/45ED7DEC.7010403@sw.ru
+4. Emelianov, Pavel. RSS controller based on process cgroups (v2)
+   https://lore.kernel.org/r/461A3010.90403@sw.ru
+5. Emelianov, Pavel. RSS controller based on process cgroups (v3)
+   https://lore.kernel.org/r/465D9739.8070209@openvz.org
+6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/
+7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control
+   subsystem (v3), http://lwn.net/Articles/235534/
+8. Singh, Balbir. RSS controller v2 test results (lmbench),
+   https://lore.kernel.org/r/464C95D4.7070806@linux.vnet.ibm.com
+9. Singh, Balbir. RSS controller v2 AIM9 results
+   https://lore.kernel.org/r/464D267A.50107@linux.vnet.ibm.com
+10. Singh, Balbir. Memory controller v6 test results,
+    https://lore.kernel.org/r/20070819094658.654.84837.sendpatchset@balbir-laptop
+11. Singh, Balbir. Memory controller introduction (v6),
+    https://lore.kernel.org/r/20070817084228.26003.12568.sendpatchset@balbir-laptop
+12. Corbet, Jonathan, Controlling memory use in cgroups,
+    http://lwn.net/Articles/243795/
diff --git a/Documentation/admin-guide/cgroup-v1/misc.rst b/Documentation/admin-guide/cgroup-v1/misc.rst
new file mode 100644
index 000000000..661614c24
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/misc.rst
@@ -0,0 +1,4 @@
+===============
+Misc controller
+===============
+Please refer "Misc" documentation in Documentation/admin-guide/cgroup-v2.rst
diff --git a/Documentation/admin-guide/cgroup-v1/net_cls.rst b/Documentation/admin-guide/cgroup-v1/net_cls.rst
new file mode 100644
index 000000000..a2cf272af
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/net_cls.rst
@@ -0,0 +1,44 @@
+=========================
+Network classifier cgroup
+=========================
+
+The Network classifier cgroup provides an interface to
+tag network packets with a class identifier (classid).
+
+The Traffic Controller (tc) can be used to assign
+different priorities to packets from different cgroups.
+Also, Netfilter (iptables) can use this tag to perform
+actions on such packets.
+
+Creating a net_cls cgroups instance creates a net_cls.classid file.
+This net_cls.classid value is initialized to 0.
+
+You can write hexadecimal values to net_cls.classid; the format for these
+values is 0xAAAABBBB; AAAA is the major handle number and BBBB
+is the minor handle number.
+Reading net_cls.classid yields a decimal result.
+
+Example::
+
+	mkdir /sys/fs/cgroup/net_cls
+	mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls
+	mkdir /sys/fs/cgroup/net_cls/0
+	echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
+
+- setting a 10:1 handle::
+
+	cat /sys/fs/cgroup/net_cls/0/net_cls.classid
+	1048577
+
+- configuring tc::
+
+	tc qdisc add dev eth0 root handle 10: htb
+	tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
+
+- creating traffic class 10:1::
+
+	tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
+
+configuring iptables, basic example::
+
+	iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP
diff --git a/Documentation/admin-guide/cgroup-v1/net_prio.rst b/Documentation/admin-guide/cgroup-v1/net_prio.rst
new file mode 100644
index 000000000..b40905871
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/net_prio.rst
@@ -0,0 +1,57 @@
+=======================
+Network priority cgroup
+=======================
+
+The Network priority cgroup provides an interface to allow an administrator to
+dynamically set the priority of network traffic generated by various
+applications
+
+Nominally, an application would set the priority of its traffic via the
+SO_PRIORITY socket option.  This however, is not always possible because:
+
+1) The application may not have been coded to set this value
+2) The priority of application traffic is often a site-specific administrative
+   decision rather than an application defined one.
+
+This cgroup allows an administrator to assign a process to a group which defines
+the priority of egress traffic on a given interface. Network priority groups can
+be created by first mounting the cgroup filesystem::
+
+	# mount -t cgroup -onet_prio none /sys/fs/cgroup/net_prio
+
+With the above step, the initial group acting as the parent accounting group
+becomes visible at '/sys/fs/cgroup/net_prio'.  This group includes all tasks in
+the system. '/sys/fs/cgroup/net_prio/tasks' lists the tasks in this cgroup.
+
+Each net_prio cgroup contains two files that are subsystem specific
+
+net_prio.prioidx
+  This file is read-only, and is simply informative.  It contains a unique
+  integer value that the kernel uses as an internal representation of this
+  cgroup.
+
+net_prio.ifpriomap
+  This file contains a map of the priorities assigned to traffic originating
+  from processes in this group and egressing the system on various interfaces.
+  It contains a list of tuples in the form <ifname priority>.  Contents of this
+  file can be modified by echoing a string into the file using the same tuple
+  format. For example::
+
+	echo "eth0 5" > /sys/fs/cgroups/net_prio/iscsi/net_prio.ifpriomap
+
+This command would force any traffic originating from processes belonging to the
+iscsi net_prio cgroup and egressing on interface eth0 to have the priority of
+said traffic set to the value 5. The parent accounting group also has a
+writeable 'net_prio.ifpriomap' file that can be used to set a system default
+priority.
+
+Priorities are set immediately prior to queueing a frame to the device
+queueing discipline (qdisc) so priorities will be assigned prior to the hardware
+queue selection being made.
+
+One usage for the net_prio cgroup is with mqprio qdisc allowing application
+traffic to be steered to hardware/driver based traffic classes. These mappings
+can then be managed by administrators or other networking protocols such as
+DCBX.
+
+A new net_prio cgroup inherits the parent's configuration.
diff --git a/Documentation/admin-guide/cgroup-v1/pids.rst b/Documentation/admin-guide/cgroup-v1/pids.rst
new file mode 100644
index 000000000..6acebd9e7
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/pids.rst
@@ -0,0 +1,92 @@
+=========================
+Process Number Controller
+=========================
+
+Abstract
+--------
+
+The process number controller is used to allow a cgroup hierarchy to stop any
+new tasks from being fork()'d or clone()'d after a certain limit is reached.
+
+Since it is trivial to hit the task limit without hitting any kmemcg limits in
+place, PIDs are a fundamental resource. As such, PID exhaustion must be
+preventable in the scope of a cgroup hierarchy by allowing resource limiting of
+the number of tasks in a cgroup.
+
+Usage
+-----
+
+In order to use the `pids` controller, set the maximum number of tasks in
+pids.max (this is not available in the root cgroup for obvious reasons). The
+number of processes currently in the cgroup is given by pids.current.
+
+Organisational operations are not blocked by cgroup policies, so it is possible
+to have pids.current > pids.max. This can be done by either setting the limit to
+be smaller than pids.current, or attaching enough processes to the cgroup such
+that pids.current > pids.max. However, it is not possible to violate a cgroup
+policy through fork() or clone(). fork() and clone() will return -EAGAIN if the
+creation of a new process would cause a cgroup policy to be violated.
+
+To set a cgroup to have no limit, set pids.max to "max". This is the default for
+all new cgroups (N.B. that PID limits are hierarchical, so the most stringent
+limit in the hierarchy is followed).
+
+pids.current tracks all child cgroup hierarchies, so parent/pids.current is a
+superset of parent/child/pids.current.
+
+The pids.events file contains event counters:
+
+  - max: Number of times fork failed because limit was hit.
+
+Example
+-------
+
+First, we mount the pids controller::
+
+	# mkdir -p /sys/fs/cgroup/pids
+	# mount -t cgroup -o pids none /sys/fs/cgroup/pids
+
+Then we create a hierarchy, set limits and attach processes to it::
+
+	# mkdir -p /sys/fs/cgroup/pids/parent/child
+	# echo 2 > /sys/fs/cgroup/pids/parent/pids.max
+	# echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs
+	# cat /sys/fs/cgroup/pids/parent/pids.current
+	2
+	#
+
+It should be noted that attempts to overcome the set limit (2 in this case) will
+fail::
+
+	# cat /sys/fs/cgroup/pids/parent/pids.current
+	2
+	# ( /bin/echo "Here's some processes for you." | cat )
+	sh: fork: Resource temporary unavailable
+	#
+
+Even if we migrate to a child cgroup (which doesn't have a set limit), we will
+not be able to overcome the most stringent limit in the hierarchy (in this case,
+parent's)::
+
+	# echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs
+	# cat /sys/fs/cgroup/pids/parent/pids.current
+	2
+	# cat /sys/fs/cgroup/pids/parent/child/pids.current
+	2
+	# cat /sys/fs/cgroup/pids/parent/child/pids.max
+	max
+	# ( /bin/echo "Here's some processes for you." | cat )
+	sh: fork: Resource temporary unavailable
+	#
+
+We can set a limit that is smaller than pids.current, which will stop any new
+processes from being forked at all (note that the shell itself counts towards
+pids.current)::
+
+	# echo 1 > /sys/fs/cgroup/pids/parent/pids.max
+	# /bin/echo "We can't even spawn a single process now."
+	sh: fork: Resource temporary unavailable
+	# echo 0 > /sys/fs/cgroup/pids/parent/pids.max
+	# /bin/echo "We can't even spawn a single process now."
+	sh: fork: Resource temporary unavailable
+	#
diff --git a/Documentation/admin-guide/cgroup-v1/rdma.rst b/Documentation/admin-guide/cgroup-v1/rdma.rst
new file mode 100644
index 000000000..e69369b72
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/rdma.rst
@@ -0,0 +1,117 @@
+===============
+RDMA Controller
+===============
+
+.. Contents
+
+   1. Overview
+     1-1. What is RDMA controller?
+     1-2. Why RDMA controller needed?
+     1-3. How is RDMA controller implemented?
+   2. Usage Examples
+
+1. Overview
+===========
+
+1-1. What is RDMA controller?
+-----------------------------
+
+RDMA controller allows user to limit RDMA/IB specific resources that a given
+set of processes can use. These processes are grouped using RDMA controller.
+
+RDMA controller defines two resources which can be limited for processes of a
+cgroup.
+
+1-2. Why RDMA controller needed?
+--------------------------------
+
+Currently user space applications can easily take away all the rdma verb
+specific resources such as AH, CQ, QP, MR etc. Due to which other applications
+in other cgroup or kernel space ULPs may not even get chance to allocate any
+rdma resources. This can lead to service unavailability.
+
+Therefore RDMA controller is needed through which resource consumption
+of processes can be limited. Through this controller different rdma
+resources can be accounted.
+
+1-3. How is RDMA controller implemented?
+----------------------------------------
+
+RDMA cgroup allows limit configuration of resources. Rdma cgroup maintains
+resource accounting per cgroup, per device using resource pool structure.
+Each such resource pool is limited up to 64 resources in given resource pool
+by rdma cgroup, which can be extended later if required.
+
+This resource pool object is linked to the cgroup css. Typically there
+are 0 to 4 resource pool instances per cgroup, per device in most use cases.
+But nothing limits to have it more. At present hundreds of RDMA devices per
+single cgroup may not be handled optimally, however there is no
+known use case or requirement for such configuration either.
+
+Since RDMA resources can be allocated from any process and can be freed by any
+of the child processes which shares the address space, rdma resources are
+always owned by the creator cgroup css. This allows process migration from one
+to other cgroup without major complexity of transferring resource ownership;
+because such ownership is not really present due to shared nature of
+rdma resources. Linking resources around css also ensures that cgroups can be
+deleted after processes migrated. This allow progress migration as well with
+active resources, even though that is not a primary use case.
+
+Whenever RDMA resource charging occurs, owner rdma cgroup is returned to
+the caller. Same rdma cgroup should be passed while uncharging the resource.
+This also allows process migrated with active RDMA resource to charge
+to new owner cgroup for new resource. It also allows to uncharge resource of
+a process from previously charged cgroup which is migrated to new cgroup,
+even though that is not a primary use case.
+
+Resource pool object is created in following situations.
+(a) User sets the limit and no previous resource pool exist for the device
+of interest for the cgroup.
+(b) No resource limits were configured, but IB/RDMA stack tries to
+charge the resource. So that it correctly uncharge them when applications are
+running without limits and later on when limits are enforced during uncharging,
+otherwise usage count will drop to negative.
+
+Resource pool is destroyed if all the resource limits are set to max and
+it is the last resource getting deallocated.
+
+User should set all the limit to max value if it intents to remove/unconfigure
+the resource pool for a particular device.
+
+IB stack honors limits enforced by the rdma controller. When application
+query about maximum resource limits of IB device, it returns minimum of
+what is configured by user for a given cgroup and what is supported by
+IB device.
+
+Following resources can be accounted by rdma controller.
+
+  ==========    =============================
+  hca_handle	Maximum number of HCA Handles
+  hca_object 	Maximum number of HCA Objects
+  ==========    =============================
+
+2. Usage Examples
+=================
+
+(a) Configure resource limit::
+
+	echo mlx4_0 hca_handle=2 hca_object=2000 > /sys/fs/cgroup/rdma/1/rdma.max
+	echo ocrdma1 hca_handle=3 > /sys/fs/cgroup/rdma/2/rdma.max
+
+(b) Query resource limit::
+
+	cat /sys/fs/cgroup/rdma/2/rdma.max
+	#Output:
+	mlx4_0 hca_handle=2 hca_object=2000
+	ocrdma1 hca_handle=3 hca_object=max
+
+(c) Query current usage::
+
+	cat /sys/fs/cgroup/rdma/2/rdma.current
+	#Output:
+	mlx4_0 hca_handle=1 hca_object=20
+	ocrdma1 hca_handle=1 hca_object=23
+
+(d) Delete resource limit::
+
+	echo mlx4_0 hca_handle=max hca_object=max > /sys/fs/cgroup/rdma/1/rdma.max