Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 114 insertions, 0 deletions

diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst
new file mode 100644
index 000000000..546979360
--- /dev/null
+++ b/Documentation/admin-guide/perf/hisi-pmu.rst
@@ -0,0 +1,114 @@
+======================================================
+HiSilicon SoC uncore Performance Monitoring Unit (PMU)
+======================================================
+
+The HiSilicon SoC chip includes various independent system device PMUs
+such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are
+independent and have hardware logic to gather statistics and performance
+information.
+
+The HiSilicon SoC encapsulates multiple CPU and IO dies. Each CPU cluster
+(CCL) is made up of 4 cpu cores sharing one L3 cache; each CPU die is
+called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has
+two HHAs (0 - 1) and four DDRCs (0 - 3), respectively.
+
+HiSilicon SoC uncore PMU driver
+-------------------------------
+
+Each device PMU has separate registers for event counting, control and
+interrupt, and the PMU driver shall register perf PMU drivers like L3C,
+HHA and DDRC etc. The available events and configuration options shall
+be described in the sysfs, see:
+
+/sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or
+/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>.
+The "perf list" command shall list the available events from sysfs.
+
+Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU
+name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>.
+where "sccl-id" is the identifier of the SCCL and "index-id" is the index of
+module.
+
+e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in
+SCCL ID #3.
+
+e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in
+SCCL ID #1.
+
+The driver also provides a "cpumask" sysfs attribute, which shows the CPU core
+ID used to count the uncore PMU event.
+
+Example usage of perf::
+
+  $# perf list
+  hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
+
+For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same
+as PMU v1, but some new functions are added to the hardware.
+
+(a) L3C PMU supports filtering by core/thread within the cluster which can be
+specified as a bitmap::
+
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5
+
+This will only count the operations from core/thread 0 and 1 in this cluster.
+
+(b) Tracetag allow the user to chose to count only read, write or atomic
+operations via the tt_req parameeter in perf. The default value counts all
+operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101
+represents write operations, 3'b110 represents atomic store operations and
+3'b111 represents atomic non-store operations, other values are reserved::
+
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5
+
+This will only count the read operations in this cluster.
+
+(c) Datasrc allows the user to check where the data comes from. It is 5 bits.
+Some important codes are as follows:
+5'b00001: comes from L3C in this die;
+5'b01000: comes from L3C in the cross-die;
+5'b01001: comes from L3C which is in another socket;
+5'b01110: comes from the local DDR;
+5'b01111: comes from the cross-die DDR;
+5'b10000: comes from cross-socket DDR;
+etc, it is mainly helpful to find that the data source is nearest from the CPU
+cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be
+configured in perf command::
+
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/,
+  hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5
+
+(d)Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
+contains several Compute Clusters (CCLs). The I/O dies are called Super I/O
+clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the
+SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit
+CCL/ICL-ID. For I/O die, the ICL-ID is followed by:
+5'b00000: I/O_MGMT_ICL;
+5'b00001: Network_ICL;
+5'b00011: HAC_ICL;
+5'b10000: PCIe_ICL;
+
+Users could configure IDs to count data come from specific CCL/ICL, by setting
+srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting
+tgtid_cmd & tgtid_msk. A set bit in srcid_msk/tgtid_msk means the PMU will not
+check the bit when matching against the srcid_cmd/tgtid_cmd.
+
+If all of these options are disabled, it can works by the default value that
+doesn't distinguish the filter condition and ID information and will return
+the total counter values in the PMU counters.
+
+The current driver does not support sampling. So "perf record" is unsupported.
+Also attach to a task is unsupported as the events are all uncore.
+
+Note: Please contact the maintainer for a complete list of events supported for
+the PMU devices in the SoC and its information if needed.