Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 215 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
new file mode 100644
index 000000000..fced4082b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interconnect target module binding
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Texas Instruments SoCs can have a generic interconnect target module
+  for devices connected to various interconnects such as L3 interconnect
+  using Arteris NoC, and L4 interconnect using Sonics s3220. This module
+  is mostly used for interaction between module and Power, Reset and Clock
+  Manager PRCM. It participates in the OCP Disconnect Protocol, but other
+  than that it is mostly independent of the interconnect.
+
+  Each interconnect target module can have one or more devices connected to
+  it. There is a set of control registers for managing the interconnect target
+  module clocks, idle modes and interconnect level resets.
+
+  The interconnect target module control registers are sprinkled into the
+  unused register address space of the first child device IP block managed by
+  the interconnect target module. Typically the register names are REVISION,
+  SYSCONFIG and SYSSTATUS.
+
+properties:
+  $nodename:
+    pattern: "^target-module(@[0-9a-f]+)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,sysc-omap2
+              - ti,sysc-omap4
+              - ti,sysc-omap4-simple
+              - ti,sysc-omap2-timer
+              - ti,sysc-omap4-timer
+              - ti,sysc-omap3430-sr
+              - ti,sysc-omap3630-sr
+              - ti,sysc-omap4-sr
+              - ti,sysc-omap3-sham
+              - ti,sysc-omap-aes
+              - ti,sysc-mcasp
+              - ti,sysc-dra7-mcasp
+              - ti,sysc-usb-host-fs
+              - ti,sysc-dra7-mcan
+              - ti,sysc-pruss
+          - const: ti,sysc
+      - items:
+          - const: ti,sysc
+
+  reg:
+    description:
+      Interconnect target module control registers consisting of
+      REVISION, SYSCONFIG and SYSSTATUS registers as defined in the
+      Technical Reference Manual for the SoC.
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    description:
+      Interconnect target module control register names consisting
+      of "rev", "sysc" and "syss".
+    oneOf:
+      - minItems: 1
+        items:
+          - const: rev
+          - const: sysc
+          - const: syss
+      - items:
+          - const: rev
+          - const: syss
+      - enum: [ sysc, syss ]
+
+  power-domains:
+    description: Target module power domain if available.
+    maxItems: 1
+
+  clocks:
+    description:
+      Target module clocks consisting of one functional clock, one
+      interface clock, and up to 8 module specific optional clocks.
+      Some modules may have only the functional clock, and some have
+      no configurable clocks.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    description:
+      Target module clock names like "fck", "ick", "optck1", "optck2"
+      if the clocks are configurable.
+    oneOf:
+      - enum: [ ick, fck, sys_clk ]
+      - items:
+          - const: fck
+          - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+      - items:
+          - const: fck
+          - const: phy-clk
+          - const: phy-clk-div
+      - items:
+          - const: fck
+          - const: hdmi_clk
+          - const: sys_clk
+          - const: tv_clk
+      - items:
+          - const: fck
+          - const: ahclkx
+          - const: ahclkr
+
+  resets:
+    description:
+      Target module reset bit in the RSTCTRL register if wired for the module.
+      Note that the other reset bits should be mapped for the child device
+      driver to use.
+    maxItems: 1
+
+  reset-names:
+    description:
+      Target module reset names in the RSTCTRL register, typically named
+      "rstctrl" if only one reset bit is wired for the module.
+    items:
+      - const: rstctrl
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  dma-ranges: true
+
+  ti,sysc-mask:
+    description: Mask of supported register bits for the SYSCONFIG register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-midle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,sysc-sidle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,syss-mask:
+    description: Mask of supported register bits for the SYSSTATUS register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-delay-us:
+    description: Delay needed after OCP softreset before accessing SYCONFIG
+    default: 0
+    minimum: 0
+    maximum: 2
+
+  ti,no-reset-on-init:
+    description: Interconnect target module shall not be reset at init
+    type: boolean
+
+  ti,no-idle-on-init:
+    description: Interconnect target module shall not be idled at init
+    type: boolean
+
+  ti,no-idle:
+    description: Interconnect target module shall not be idled
+    type: boolean
+
+  ti,hwmods:
+    description: Interconnect module name to use with legacy hwmod data
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/bus/ti-sysc.h>
+    #include <dt-bindings/clock/omap4.h>
+
+    target-module@2b000 {
+        compatible = "ti,sysc-omap2", "ti,sysc";
+        ti,hwmods = "usb_otg_hs";
+        reg = <0x2b400 0x4>,
+              <0x2b404 0x4>,
+              <0x2b408 0x4>;
+        reg-names = "rev", "sysc", "syss";
+        clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+        clock-names = "fck";
+        ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+                         SYSC_OMAP2_SOFTRESET |
+                         SYSC_OMAP2_AUTOIDLE)>;
+        ti,sysc-midle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>;
+        ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>,
+                        <SYSC_IDLE_SMART_WKUP>;
+        ti,syss-mask = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x2b000 0x1000>;
+    };