Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 191 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
new file mode 100644
index 000000000..4d18cd722
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
@@ -0,0 +1,18 @@
+FlexTimer Quadrature decoder counter
+
+This driver exposes a simple counter for the quadrature decoder mode.
+
+Required properties:
+- compatible:		Must be "fsl,ftm-quaddec".
+- reg:			Must be set to the memory region of the flextimer.
+
+Optional property:
+- big-endian:		Access the device registers in big-endian mode.
+
+Example:
+		counter0: counter@29d0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
new file mode 100644
index 000000000..fd075d104
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic interrupt counter to measure interrupt frequency. It was developed
+  and used for agricultural devices to measure rotation speed of wheels or
+  other tools. Since the direction of rotation is not important, only one
+  signal line is needed.
+  Interrupts or gpios are required. If both are defined, the interrupt will
+  take precedence for counting interrupts.
+
+properties:
+  compatible:
+    const: interrupt-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required: [ interrupts-extended ]
+  - required: [ interrupts ]
+  - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "interrupt-counter";
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    counter-2 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000..4e0b2d2b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
new file mode 100644
index 000000000..85f1ff83a
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+properties:
+  compatible:
+    const: ti,am3352-eqep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The eQEP event interrupt
+    maxItems: 1
+
+  clocks:
+    description: The clock that determines the SYSCLKOUT rate for the eQEP
+      peripheral.
+    maxItems: 1
+
+  clock-names:
+    const: sysclkout
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    eqep0: counter@180 {
+        compatible = "ti,am3352-eqep";
+        reg = <0x180 0x80>;
+        clocks = <&l4ls_gclk>;
+        clock-names = "sysclkout";
+        interrupts = <79>;
+    };
+
+...