Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
new file mode 100644
index 000000000..20236385f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
@@ -0,0 +1,64 @@
+* QCOM IOMMU
+
+The MSM IOMMU is an implementation compatible with the ARM VMSA short
+descriptor page tables. It provides address translation for bus masters outside
+of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+Required Properties:
+
+  - compatible: Must contain "qcom,apq8064-iommu".
+  - reg: Base address and size of the IOMMU registers.
+  - interrupts: Specifiers for the MMU fault interrupts. For instances that
+    support secure mode two interrupts must be specified, for non-secure and
+    secure mode, in that order. For instances that don't support secure mode a
+    single interrupt must be specified.
+  - #iommu-cells: The number of cells needed to specify the stream id. This
+		  is always 1.
+  - qcom,ncb:	  The total number of context banks in the IOMMU.
+  - clocks	: List of clocks to be used during SMMU register access. See
+		  Documentation/devicetree/bindings/clock/clock-bindings.txt
+		  for information about the format. For each clock specified
+		  here, there must be a corresponding entry in clock-names
+		  (see below).
+
+  - clock-names	: List of clock names corresponding to the clocks specified in
+		  the "clocks" property (above).
+		  Should be "smmu_pclk" for specifying the interface clock
+		  required for iommu's register accesses.
+		  Should be "smmu_clk" for specifying the functional clock
+		  required by iommu for bus accesses.
+
+Each bus master connected to an IOMMU must reference the IOMMU in its device
+node with the following property:
+
+  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
+	    phandle to the IOMMU and the second cell is the stream id.
+	    A single master device can be connected to more than one iommu
+	    and multiple contexts in each of the iommu. So multiple entries
+	    are required to list all the iommus and the stream ids that the
+	    master is connected to.
+
+Example: mdp iommu and its bus master
+
+                mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "smmu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 0>,
+			    <GIC_SPI 64 0>;
+			qcom,ncb = <2>;
+		};
+
+		mdp: qcom,mdp@5100000 {
+			compatible = "qcom,mdp";
+			...
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2>;
+		};