Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 241 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
new file mode 100644
index 000000000..3c14a9843
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds properties
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  LED and flash LED devices provide the same basic functionality as current
+  regulators, but extended with LED and flash LED specific features like
+  blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+  Many LED devices expose more than one current output that can be connected
+  to one or more discrete LED component. Since the arrangement of connections
+  can influence the way of the LED device initialization, the LED components
+  have to be tightly coupled with the LED device binding. They are represented
+  by child nodes of the parent LED device binding.
+
+properties:
+  led-sources:
+    description:
+      List of device current outputs the LED is connected to. The outputs are
+      identified by the numbers that must be defined in the LED device binding
+      documentation.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  function:
+    description:
+      LED function. Use one of the LED_FUNCTION_* prefixed definitions
+      from the header include/dt-bindings/leds/common.h. If there is no
+      matching LED_FUNCTION available, add a new one.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  color:
+    description:
+      Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
+      the header include/dt-bindings/leds/common.h. If there is no matching
+      LED_COLOR_ID available, add a new one.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 9
+
+  function-enumerator:
+    description:
+      Integer to be used when more than one instance of the same function is
+      needed, differing only with an ordinal number.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  label:
+    description:
+      The label for this LED. If omitted, the label is taken from the node name
+      (excluding the unit address). It has to uniquely identify a device, i.e.
+      no other LED class device can be assigned the same label. This property is
+      deprecated - use 'function' and 'color' properties instead.
+      function-enumerator has no effect when this property is present.
+
+  default-state:
+    description:
+      The initial state of the LED. If the LED is already on or off and the
+      default-state property is set the to same value, then no glitch should be
+      produced where the LED momentarily turns off (or on). The "keep" setting
+      will keep the LED at whatever its current state is, without producing a
+      glitch.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - on
+      - off
+      - keep
+    default: off
+
+  linux,default-trigger:
+    description:
+      This parameter, if present, is a string defining the trigger assigned to
+      the LED.
+    $ref: /schemas/types.yaml#/definitions/string
+
+    oneOf:
+      - enum:
+            # LED will act as a back-light, controlled by the framebuffer system
+          - backlight
+            # LED will turn on (but for leds-gpio see "default-state" property in
+            # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
+          - default-on
+            # LED "double" flashes at a load average based rate
+          - heartbeat
+            # LED indicates disk activity
+          - disk-activity
+            # LED indicates IDE disk activity (deprecated), in new implementations
+            # use "disk-activity"
+          - ide-disk
+            # LED flashes at a fixed, configurable rate
+          - timer
+            # LED alters the brightness for the specified duration with one software
+            # timer (requires "led-pattern" property)
+          - pattern
+        # LED is triggered by SD/MMC activity
+      - pattern: "^mmc[0-9]+$"
+
+  led-pattern:
+    description: |
+      Array of integers with default pattern for certain triggers.
+
+      Each trigger may parse this property differently:
+        - one-shot : two numbers specifying delay on and delay off (in ms),
+        - timer : two numbers specifying delay on and delay off (in ms),
+        - pattern : the pattern is given by a series of tuples, of
+          brightness and duration (in ms).  The exact format is
+          described in:
+          Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  led-max-microamp:
+    description:
+      Maximum LED supply current in microamperes. This property can be made
+      mandatory for the board configurations introducing a risk of hardware
+      damage in case an excessive current is set.
+      For flash LED controllers with configurable current this property is
+      mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
+
+  panic-indicator:
+    description:
+      This property specifies that the LED should be used, if at all possible,
+      as a panic indicator.
+    type: boolean
+
+  retain-state-shutdown:
+    description:
+      This property specifies that the LED should not be turned off or changed
+      when the system shuts down.
+    type: boolean
+
+  trigger-sources:
+    description: |
+      List of devices which should be used as a source triggering this LED
+      activity. Some LEDs can be related to a specific device and should somehow
+      indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0
+      port(s).
+      Another common example is switch or router with multiple Ethernet ports
+      each of them having its own LED assigned (assuming they are not
+      hardwired). In such cases this property should contain phandle(s) of
+      related source device(s).
+      In many cases LED can be related to more than one device (e.g. one USB LED
+      vs. multiple USB ports). Each source should be represented by a node in
+      the device tree and be referenced by a phandle and a set of phandle
+      arguments. A length of arguments should be specified by the
+      #trigger-source-cells property in the source node.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  # Required properties for flash LED child nodes:
+  flash-max-microamp:
+    description:
+      Maximum flash LED supply current in microamperes. Required for flash LED
+      nodes with configurable current.
+
+  flash-max-timeout-us:
+    description:
+      Maximum timeout in microseconds after which the flash LED is turned off.
+      Required for flash LED nodes with configurable timeout.
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "gpio-leds";
+
+        led-0 {
+            function = LED_FUNCTION_STATUS;
+            linux,default-trigger = "heartbeat";
+            gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+        };
+
+        led-1 {
+            function = LED_FUNCTION_USB;
+            gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+            trigger-sources = <&ohci_port1>, <&ehci_port1>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "maxim,max77693-led";
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-sources = <0>, <1>;
+            led-max-microamp = <50000>;
+            flash-max-microamp = <320000>;
+            flash-max-timeout-us = <500000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "panasonic,an30259a";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                linux,default-trigger = "heartbeat";
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <1>;
+            };
+
+            led@2 {
+                reg = <2>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <2>;
+            };
+
+            led@3 {
+                reg = <3>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <3>;
+            };
+        };
+    };
+
+...