Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 67 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
new file mode 100644
index 000000000..d3d854967
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller consumer bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  Mux controller consumers should specify a list of mux controllers that they
+  want to use with a property containing a 'mux-ctrl-list':
+
+    mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
+    single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
+    mux-ctrl-phandle : phandle to mux controller node
+    mux-ctrl-specifier : array of #mux-control-cells specifying the
+                         given mux controller (controller specific)
+
+  Mux controller properties should be named "mux-controls". The exact meaning of
+  each mux controller property must be documented in the device tree binding for
+  each consumer. An optional property "mux-control-names" may contain a list of
+  strings to label each of the mux controllers listed in the "mux-controls"
+  property.
+
+  If it is required to provide the state that the mux controller needs to
+  be set to, the property "mux-states" must be used. An optional property
+  "mux-state-names" can be used to provide a list of strings, to label
+  each of the multiplixer states listed in the "mux-states" property.
+
+  Properties "mux-controls" and "mux-states" can be used depending on how
+  the consumers want to control the mux controller. If the consumer needs
+  needs to set multiple states in a mux controller, then property
+  "mux-controls" can be used. If the consumer needs to set the mux
+  controller to a given state then property "mux-states" can be used.
+
+  mux-ctrl-specifier typically encodes the chip-relative mux controller number.
+  If the mux controller chip only provides a single mux controller, the
+  mux-ctrl-specifier can typically be left out.
+
+select: true
+
+properties:
+  mux-controls:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mux-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mux-control-names:
+    description:
+      Devices that use more than a single mux controller can use the
+      "mux-control-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-controls" property.
+
+  mux-state-names:
+    description:
+      Devices that use more than a single multiplexer state can use the
+      "mux-state-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-states"
+      property.
+
+additionalProperties: true
+
+...