Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 206 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
new file mode 100644
index 000000000..c855fbad3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller provider bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  A multiplexer (or mux) controller will have one, or several, consumer devices
+  that uses the mux controller. Thus, a mux controller can possibly control
+  several parallel multiplexers. Presumably there will be at least one
+  multiplexer needed by each consumer, but a single mux controller can of course
+  control several multiplexers for a single consumer.
+
+  A mux controller provides a number of states to its consumers, and the state
+  space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
+  0-7 for an 8-way multiplexer, etc.
+
+
+  Mux controller nodes
+  --------------------
+
+  Mux controller nodes must specify the number of cells used for the
+  specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+  The value of '#mux-state-cells' will always be one greater than the value
+  of '#mux-control-cells'.
+
+  Optionally, mux controller nodes can also specify the state the mux should
+  have when it is idle. The idle-state property is used for this. If the
+  idle-state is not present, the mux controller is typically left as is when
+  it is idle. For multiplexer chips that expose several mux controllers, the
+  idle-state property is an array with one idle state for each mux controller.
+
+  The special value (-1) may be used to indicate that the mux should be left
+  as is when it is idle. This is the default, but can still be useful for
+  mux controller chips with more than one mux controller, particularly when
+  there is a need to "step past" a mux controller and set some other idle
+  state for a mux controller with a higher index.
+
+  Some mux controllers have the ability to disconnect the input/output of the
+  multiplexer. Using this disconnected high-impedance state as the idle state
+  is indicated with idle state (-2).
+
+  These constants are available in
+
+        #include <dt-bindings/mux/mux.h>
+
+  as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2).
+
+  An example mux controller node look like this (the adg972a chip is a triple
+  4-way multiplexer):
+
+    mux: mux-controller@50 {
+      compatible = "adi,adg792a";
+      reg = <0x50>;
+      #mux-control-cells = <1>;
+
+      idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
+    };
+
+select:
+  anyOf:
+    - properties:
+        $nodename:
+          pattern: '^mux-controller'
+    - required:
+        - '#mux-control-cells'
+    - required:
+        - '#mux-state-cells'
+
+properties:
+  $nodename:
+    pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+
+  '#mux-control-cells':
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
+  idle-state:
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -2
+
+  idle-states:
+    description: |
+      Mux controller nodes can specify the state the mux should have when it is
+      idle. If the idle-state is not present, the mux controller is typically
+      left as is when it is idle. For multiplexer chips that expose several mux
+      controllers, the idle-state property is an array with one idle state for
+      each mux controller.
+
+      The special value (-1) may be used to indicate that the mux should be left
+      as is when it is idle. This is the default, but can still be useful for
+      mux controller chips with more than one mux controller, particularly when
+      there is a need to "step past" a mux controller and set some other idle
+      state for a mux controller with a higher index.
+
+      Some mux controllers have the ability to disconnect the input/output of the
+      multiplexer. Using this disconnected high-impedance state as the idle state
+      is indicated with idle state (-2).
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    items:
+      minimum: -2
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* One consumer of a 2-way mux controller (one GPIO-line) */
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux>;
+        mux-control-names = "adc";
+
+        channels = "sync", "in";
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /*
+     * Two consumers (one for an ADC line and one for an i2c bus) of
+     * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+     */
+    mux2: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+              <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux2>;
+
+        channels = "sync-1", "in", "out", "sync-2";
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux2>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307: oled@3c {
+                reg = <0x3c>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pca9555: pca9555@20 {
+                reg = <0x20>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux1: mux-controller {
+        compatible = "gpio-mux";
+        #mux-state-cells = <1>;
+        mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    transceiver4: can-phy4 {
+        compatible = "ti,tcan1042";
+        #phy-cells = <0>;
+        max-bitrate = <5000000>;
+        standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+        mux-states = <&mux1 1>;
+    };
+...