summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/marvell-pp2.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/devicetree/bindings/net/marvell-pp2.txt
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/net/marvell-pp2.txt')
-rw-r--r--Documentation/devicetree/bindings/net/marvell-pp2.txt141
1 files changed, 141 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
new file mode 100644
index 000000000..ce15c173f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -0,0 +1,141 @@
+* Marvell Armada 375 Ethernet Controller (PPv2.1)
+ Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+ Marvell CN913X Ethernet Controller (PPv2.3)
+
+Required properties:
+
+- compatible: should be one of:
+ "marvell,armada-375-pp2"
+ "marvell,armada-7k-pp2"
+- reg: addresses and length of the register sets for the device.
+ For "marvell,armada-375-pp2", must contain the following register
+ sets:
+ - common controller registers
+ - LMS registers
+ - one register area per Ethernet port
+ For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
+ sets:
+ - packet processor registers
+ - networking interfaces registers
+ - CM3 address space used for TX Flow Control
+
+- clocks: pointers to the reference clocks for this device, consequently:
+ - main controller clock (for both armada-375-pp2 and armada-7k-pp2)
+ - GOP clock (for both armada-375-pp2 and armada-7k-pp2)
+ - MG clock (only for armada-7k-pp2)
+ - MG Core clock (only for armada-7k-pp2)
+ - AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+ "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
+
+The ethernet ports are represented by subnodes. At least one port is
+required.
+
+Required properties (port):
+
+- interrupts: interrupt(s) for the port
+- port-id: ID of the port from the MAC point of view
+- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
+ GOP (Group Of Ports) point of view. This ID is used to index the
+ per-port registers in the second register area.
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties (port):
+
+- marvell,loopback: port is loopback mode
+- phy: a phandle to a phy node defining the PHY address (as the reg
+ property, a single integer).
+- interrupt-names: if more than a single interrupt for is given, must be the
+ name associated to the interrupts listed. Valid names are:
+ "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+ "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+ for backward compatibility but shouldn't be used for new
+ additions.
+- marvell,system-controller: a phandle to the system controller.
+
+Example for marvell,armada-375-pp2:
+
+ethernet@f0000 {
+ compatible = "marvell,armada-375-pp2";
+ reg = <0xf0000 0xa000>,
+ <0xc0000 0x3060>,
+ <0xc4000 0x100>,
+ <0xc5000 0x100>;
+ clocks = <&gateclk 3>, <&gateclk 19>;
+ clock-names = "pp_clk", "gop_clk";
+
+ eth0: eth0@c4000 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ phy = <&phy0>;
+ phy-mode = "gmii";
+ };
+
+ eth1: eth1@c5000 {
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ phy = <&phy3>;
+ phy-mode = "gmii";
+ };
+};
+
+Example for marvell,armada-7k-pp2:
+
+cpm_ethernet: ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+ clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
+
+ eth0: eth0 {
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
+ port-id = <0>;
+ gop-port-id = <0>;
+ };
+
+ eth1: eth1 {
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
+ port-id = <1>;
+ gop-port-id = <2>;
+ };
+
+ eth2: eth2 {
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
+ port-id = <2>;
+ gop-port-id = <3>;
+ };
+};