Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
new file mode 100644
index 000000000..38e54b3fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -0,0 +1,33 @@
+Binding for the LTC2952 PowerPath controller
+
+This chip is used to externally trigger a system shut down. Once the trigger has
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
+
+Required properties:
+
+- compatible:		Must contain: "lltc,ltc2952"
+- watchdog-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's watchdog line
+- kill-gpios:		phandle + gpio-specifier for the GPIO connected to the
+			chip's kill line
+
+Optional properties:
+- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's trigger line. If this property is not set, the
+			trigger function is ignored and the chip is kept alive
+			until an explicit kill signal is received
+- trigger-delay-ms	The number of milliseconds to wait after trigger line
+			assertion before executing shut down procedure.
+			The default is 2500ms.
+
+Example:
+
+ltc2952 {
+	compatible = "lltc,ltc2952";
+
+	trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+	trigger-delay-ms = <2000>;
+	watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+};