Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 206 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
new file mode 100644
index 000000000..8ca19f2b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
+  It has in-built Soundwire controller, pin controller, interrupt mux and
+  supports both I2S/I2C and SLIMbus audio interfaces.
+
+properties:
+  compatible:
+    const: slim217,250
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  slim-ifc-dev: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-buck-sido-supply:
+    description: A reference to the 1.8V SIDO buck supply
+
+  vdd-rx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-tx-supply:
+    description: A reference to the 1.8V tx supply
+
+  vdd-vbat-supply:
+    description: A reference to the vbat supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-micbias-supply:
+    description: A reference to the micbias supply
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  clock-output-names:
+    const: mclk
+
+  clock-frequency:
+    description: Clock frequency of output clk in Hz
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  gpio@42:
+    type: object
+    $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml#
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: |
+      WCD934x subnode for each slave devices. Bindings of each subnodes
+      depends on the specific driver providing the functionality and
+      documented in their respective bindings.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - slim-ifc-dev
+  - interrupts
+  - interrupt-controller
+  - clock-frequency
+  - clock-output-names
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#interrupt-cells"
+  - "#clock-cells"
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    codec@1,0{
+        compatible = "slim217,250";
+        reg  = <1 0>;
+        reset-gpios = <&tlmm 64 0>;
+        slim-ifc-dev  = <&wcd9340_ifd>;
+        #sound-dai-cells = <1>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <54 4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #clock-cells = <0>;
+        clock-frequency = <9600000>;
+        clock-output-names = "mclk";
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+        clock-names = "extclk";
+        clocks = <&rpmhcc 2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        gpio@42 {
+            compatible = "qcom,wcd9340-gpio";
+            reg = <0x42 0x2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...