Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 171 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
new file mode 100644
index 000000000..491a695a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas MSIOF SPI controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,msiof-sh73a0     # SH-Mobile AG5
+          - const: renesas,sh-mobile-msiof  # generic SH-Mobile compatible
+                                            # device
+      - items:
+          - enum:
+              - renesas,msiof-r8a7742       # RZ/G1H
+              - renesas,msiof-r8a7743       # RZ/G1M
+              - renesas,msiof-r8a7744       # RZ/G1N
+              - renesas,msiof-r8a7745       # RZ/G1E
+              - renesas,msiof-r8a77470      # RZ/G1C
+              - renesas,msiof-r8a7790       # R-Car H2
+              - renesas,msiof-r8a7791       # R-Car M2-W
+              - renesas,msiof-r8a7792       # R-Car V2H
+              - renesas,msiof-r8a7793       # R-Car M2-N
+              - renesas,msiof-r8a7794       # R-Car E2
+          - const: renesas,rcar-gen2-msiof  # generic R-Car Gen2 and RZ/G1
+                                            # compatible device
+      - items:
+          - enum:
+              - renesas,msiof-r8a774a1      # RZ/G2M
+              - renesas,msiof-r8a774b1      # RZ/G2N
+              - renesas,msiof-r8a774c0      # RZ/G2E
+              - renesas,msiof-r8a774e1      # RZ/G2H
+              - renesas,msiof-r8a7795       # R-Car H3
+              - renesas,msiof-r8a7796       # R-Car M3-W
+              - renesas,msiof-r8a77961      # R-Car M3-W+
+              - renesas,msiof-r8a77965      # R-Car M3-N
+              - renesas,msiof-r8a77970      # R-Car V3M
+              - renesas,msiof-r8a77980      # R-Car V3H
+              - renesas,msiof-r8a77990      # R-Car E3
+              - renesas,msiof-r8a77995      # R-Car D3
+          - const: renesas,rcar-gen3-msiof  # generic R-Car Gen3 and RZ/G2
+                                            # compatible device
+      - items:
+          - enum:
+              - renesas,msiof-r8a779a0      # R-Car V3U
+              - renesas,msiof-r8a779f0      # R-Car S4-8
+              - renesas,msiof-r8a779g0      # R-Car V4H
+          - const: renesas,rcar-gen4-msiof  # generic R-Car Gen4
+                                            # compatible device
+      - items:
+          - const: renesas,sh-msiof  # deprecated
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    oneOf:
+      - items:
+          - description: CPU and DMA engine registers
+      - items:
+          - description: CPU registers
+          - description: DMA engine registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-cs:
+    description: |
+      Total number of chip selects (default is 1).
+      Up to 3 native chip selects are supported:
+        0: MSIOF_SYNC
+        1: MSIOF_SS1
+        2: MSIOF_SS2
+      Hardware limitations related to chip selects:
+        - Native chip selects are always deasserted in between transfers
+          that are part of the same message.  Use cs-gpios to work around
+          this.
+        - All slaves using native chip selects must use the same spi-cs-high
+          configuration.  Use cs-gpios to work around this.
+        - When using GPIO chip selects, at least one native chip select must
+          be left unused, as it will be driven anyway.
+    minimum: 1
+    maximum: 3
+    default: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum: [ tx, rx ]
+
+  renesas,dtdl:
+    description: delay sync signal (setup) in transmit mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0        # no bit delay
+      - 50       # 0.5-clock-cycle delay
+      - 100      # 1-clock-cycle delay
+      - 150      # 1.5-clock-cycle delay
+      - 200      # 2-clock-cycle delay
+
+  renesas,syncdl:
+    description: delay sync signal (hold) in transmit mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0        # no bit delay
+      - 50       # 0.5-clock-cycle delay
+      - 100      # 1-clock-cycle delay
+      - 150      # 1.5-clock-cycle delay
+      - 200      # 2-clock-cycle delay
+      - 300      # 3-clock-cycle delay
+
+  renesas,tx-fifo-size:
+    # deprecated for soctype-specific bindings
+    description: |
+      Override the default TX fifo size.  Unit is words.  Ignored if 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+
+  renesas,rx-fifo-size:
+    # deprecated for soctype-specific bindings
+    description: |
+      Override the default RX fifo size.  Unit is words.  Ignored if 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    msiof0: spi@e6e20000 {
+        compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
+        reg = <0xe6e20000 0x0064>;
+        interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+        dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };