Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 73 insertions, 0 deletions

diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst
new file mode 100644
index 000000000..c33b4cdc0
--- /dev/null
+++ b/Documentation/hwmon/dps920ab.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver dps920ab
+========================
+
+Supported chips:
+
+  * Delta DPS920AB
+
+    Prefix: 'dps920ab'
+
+    Addresses scanned: -
+
+Authors:
+    Robert Marko <robert.marko@sartura.hr>
+
+
+Description
+-----------
+
+This driver implements support for Delta DPS920AB 920W 54V DC single output
+power supply with PMBus support.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Sysfs entries
+-------------
+
+======================= ======================================================
+curr1_label		"iin"
+curr1_input		Measured input current
+curr1_alarm		Input current high alarm
+
+curr2_label		"iout1"
+curr2_input		Measured output current
+curr2_max		Maximum output current
+curr2_rated_max		Maximum rated output current
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_alarm		Input voltage alarm
+
+in2_label		"vout1"
+in2_input		Measured output voltage
+in2_rated_min		Minimum rated output voltage
+in2_rated_max		Maximum rated output voltage
+in2_alarm		Output voltage alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power high alarm
+
+power2_label		"pout1"
+power2_input		Measured output power
+power2_rated_max	Maximum rated output power
+
+temp[1-3]_input		Measured temperature
+temp[1-3]_alarm		Temperature alarm
+
+fan1_alarm		Fan 1 warning.
+fan1_fault		Fan 1 fault.
+fan1_input		Fan 1 speed in RPM.
+======================= ======================================================