summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/ipvlan.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/networking/ipvlan.rst
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/networking/ipvlan.rst')
-rw-r--r--Documentation/networking/ipvlan.rst189
1 files changed, 189 insertions, 0 deletions
diff --git a/Documentation/networking/ipvlan.rst b/Documentation/networking/ipvlan.rst
new file mode 100644
index 000000000..0000c1d38
--- /dev/null
+++ b/Documentation/networking/ipvlan.rst
@@ -0,0 +1,189 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+IPVLAN Driver HOWTO
+===================
+
+Initial Release:
+ Mahesh Bandewar <maheshb AT google.com>
+
+1. Introduction:
+================
+This is conceptually very similar to the macvlan driver with one major
+exception of using L3 for mux-ing /demux-ing among slaves. This property makes
+the master device share the L2 with its slave devices. I have developed this
+driver in conjunction with network namespaces and not sure if there is use case
+outside of it.
+
+
+2. Building and Installation:
+=============================
+
+In order to build the driver, please select the config item CONFIG_IPVLAN.
+The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module
+(CONFIG_IPVLAN=m).
+
+
+3. Configuration:
+=================
+
+There are no module parameters for this driver and it can be configured
+using IProute2/ip utility.
+::
+
+ ip link add link <master> name <slave> type ipvlan [ mode MODE ] [ FLAGS ]
+ where
+ MODE: l3 (default) | l3s | l2
+ FLAGS: bridge (default) | private | vepa
+
+e.g.
+
+ (a) Following will create IPvlan link with eth0 as master in
+ L3 bridge mode::
+
+ bash# ip link add link eth0 name ipvl0 type ipvlan
+ (b) This command will create IPvlan link in L2 bridge mode::
+
+ bash# ip link add link eth0 name ipvl0 type ipvlan mode l2 bridge
+
+ (c) This command will create an IPvlan device in L2 private mode::
+
+ bash# ip link add link eth0 name ipvlan type ipvlan mode l2 private
+
+ (d) This command will create an IPvlan device in L2 vepa mode::
+
+ bash# ip link add link eth0 name ipvlan type ipvlan mode l2 vepa
+
+
+4. Operating modes:
+===================
+
+IPvlan has two modes of operation - L2 and L3. For a given master device,
+you can select one of these two modes and all slaves on that master will
+operate in the same (selected) mode. The RX mode is almost identical except
+that in L3 mode the slaves wont receive any multicast / broadcast traffic.
+L3 mode is more restrictive since routing is controlled from the other (mostly)
+default namespace.
+
+4.1 L2 mode:
+------------
+
+In this mode TX processing happens on the stack instance attached to the
+slave device and packets are switched and queued to the master device to send
+out. In this mode the slaves will RX/TX multicast and broadcast (if applicable)
+as well.
+
+4.2 L3 mode:
+------------
+
+In this mode TX processing up to L3 happens on the stack instance attached
+to the slave device and packets are switched to the stack instance of the
+master device for the L2 processing and routing from that instance will be
+used before packets are queued on the outbound device. In this mode the slaves
+will not receive nor can send multicast / broadcast traffic.
+
+4.3 L3S mode:
+-------------
+
+This is very similar to the L3 mode except that iptables (conn-tracking)
+works in this mode and hence it is L3-symmetric (L3s). This will have slightly less
+performance but that shouldn't matter since you are choosing this mode over plain-L3
+mode to make conn-tracking work.
+
+5. Mode flags:
+==============
+
+At this time following mode flags are available
+
+5.1 bridge:
+-----------
+This is the default option. To configure the IPvlan port in this mode,
+user can choose to either add this option on the command-line or don't specify
+anything. This is the traditional mode where slaves can cross-talk among
+themselves apart from talking through the master device.
+
+5.2 private:
+------------
+If this option is added to the command-line, the port is set in private
+mode. i.e. port won't allow cross communication between slaves.
+
+5.3 vepa:
+---------
+If this is added to the command-line, the port is set in VEPA mode.
+i.e. port will offload switching functionality to the external entity as
+described in 802.1Qbg
+Note: VEPA mode in IPvlan has limitations. IPvlan uses the mac-address of the
+master-device, so the packets which are emitted in this mode for the adjacent
+neighbor will have source and destination mac same. This will make the switch /
+router send the redirect message.
+
+6. What to choose (macvlan vs. ipvlan)?
+=======================================
+
+These two devices are very similar in many regards and the specific use
+case could very well define which device to choose. if one of the following
+situations defines your use case then you can choose to use ipvlan:
+
+
+(a) The Linux host that is connected to the external switch / router has
+ policy configured that allows only one mac per port.
+(b) No of virtual devices created on a master exceed the mac capacity and
+ puts the NIC in promiscuous mode and degraded performance is a concern.
+(c) If the slave device is to be put into the hostile / untrusted network
+ namespace where L2 on the slave could be changed / misused.
+
+
+6. Example configuration:
+=========================
+
+::
+
+ +=============================================================+
+ | Host: host1 |
+ | |
+ | +----------------------+ +----------------------+ |
+ | | NS:ns0 | | NS:ns1 | |
+ | | | | | |
+ | | | | | |
+ | | ipvl0 | | ipvl1 | |
+ | +----------#-----------+ +-----------#----------+ |
+ | # # |
+ | ################################ |
+ | # eth0 |
+ +==============================#==============================+
+
+
+(a) Create two network namespaces - ns0, ns1::
+
+ ip netns add ns0
+ ip netns add ns1
+
+(b) Create two ipvlan slaves on eth0 (master device)::
+
+ ip link add link eth0 ipvl0 type ipvlan mode l2
+ ip link add link eth0 ipvl1 type ipvlan mode l2
+
+(c) Assign slaves to the respective network namespaces::
+
+ ip link set dev ipvl0 netns ns0
+ ip link set dev ipvl1 netns ns1
+
+(d) Now switch to the namespace (ns0 or ns1) to configure the slave devices
+
+ - For ns0::
+
+ (1) ip netns exec ns0 bash
+ (2) ip link set dev ipvl0 up
+ (3) ip link set dev lo up
+ (4) ip -4 addr add 127.0.0.1 dev lo
+ (5) ip -4 addr add $IPADDR dev ipvl0
+ (6) ip -4 route add default via $ROUTER dev ipvl0
+
+ - For ns1::
+
+ (1) ip netns exec ns1 bash
+ (2) ip link set dev ipvl1 up
+ (3) ip link set dev lo up
+ (4) ip -4 addr add 127.0.0.1 dev lo
+ (5) ip -4 addr add $IPADDR dev ipvl1
+ (6) ip -4 route add default via $ROUTER dev ipvl1