Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1855 insertions, 0 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
new file mode 100644
index 000000000..6d5afe2e6
--- /dev/null
+++ b/arch/arm/Kconfig
@@ -0,0 +1,1855 @@
+# SPDX-License-Identifier: GPL-2.0
+config ARM
+	bool
+	default y
+	select ARCH_32BIT_OFF_T
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
+	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
+	select ARCH_HAS_ELF_RANDOMIZE
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_KEEPINITRD
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
+	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
+	select ARCH_HAS_STRICT_MODULE_RWX if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
+	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_USE_BUILTIN_BSWAP
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
+	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_LD_ORPHAN_WARN
+	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
+	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
+	select CLONE_BACKWARDS
+	select CPU_PM if SUSPEND || CPU_IDLE
+	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select DMA_DECLARE_COHERENT
+	select DMA_GLOBAL_POOL if !MMU
+	select DMA_OPS
+	select DMA_NONCOHERENT_MMAP if MMU
+	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
+	select GENERIC_ALLOCATOR
+	select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
+	select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_IPI if SMP
+	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_EARLY_IOREMAP
+	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_LIB_DEVMEM_IS_ALLOWED
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SCHED_CLOCK
+	select GENERIC_SMP_IDLE_THREAD
+	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
+	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_PFN_VALID
+	select HAVE_ARCH_SECCOMP
+	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
+	select HAVE_ARM_SMCCC if CPU_V7
+	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
+	select HAVE_CONTEXT_TRACKING_USER
+	select HAVE_C_RECORDMCOUNT
+	select HAVE_BUILDTIME_MCOUNT_SORT
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
+	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
+	select HAVE_EXIT_THREAD
+	select HAVE_FAST_GUP if ARM_LPAE
+	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_GCC_PLUGINS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZ4
+	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_XZ
+	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
+	select HAVE_KRETPROBES if HAVE_KPROBES
+	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_NMI
+	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PCI if MMU
+	select HAVE_PERF_EVENTS
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
+	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RSEQ
+	select HAVE_STACKPROTECTOR
+	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_UID16
+	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
+	select MODULES_USE_ELF_REL
+	select NEED_DMA_MAP_STATE
+	select OF_EARLY_FLATTREE if OF
+	select OLD_SIGACTION
+	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_SYSCALL if PCI
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
+	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	# Above selects are sorted alphabetically; please add new ones
+	# according to that.  Thanks.
+	help
+	  The ARM series is a line of low-power-consumption RISC chip designs
+	  licensed by ARM Ltd and targeted at embedded applications and
+	  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
+	  manufactured, but legacy ARM-based PC hardware remains popular in
+	  Europe.  There is an ARM Linux project with a web page at
+	  <http://www.arm.linux.org.uk/>.
+
+config ARM_HAS_GROUP_RELOCS
+	def_bool y
+	depends on !LD_IS_LLD || LLD_VERSION >= 140000
+	depends on !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations, which have been around for a long time, but were not
+	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
+	  which is usually sufficient, but not for allyesconfig, so we disable
+	  this feature when doing compile testing.
+
+config ARM_DMA_USE_IOMMU
+	bool
+	select NEED_SG_DMA_LENGTH
+
+if ARM_DMA_USE_IOMMU
+
+config ARM_DMA_IOMMU_ALIGNMENT
+	int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
+	range 4 9
+	default 8
+	help
+	  DMA mapping framework by default aligns all buffers to the smallest
+	  PAGE_SIZE order which is greater than or equal to the requested buffer
+	  size. This works well for buffers up to a few hundreds kilobytes, but
+	  for larger buffers it just a waste of address space. Drivers which has
+	  relatively small addressing window (like 64Mib) might run out of
+	  virtual space with just a few allocations.
+
+	  With this parameter you can specify the maximum PAGE_SIZE order for
+	  DMA IOMMU buffers. Larger buffers will be aligned only to this
+	  specified order. The order is expressed as a power of two multiplied
+	  by the PAGE_SIZE.
+
+endif
+
+config SYS_SUPPORTS_APM_EMULATION
+	bool
+
+config HAVE_TCM
+	bool
+	select GENERIC_ALLOCATOR
+
+config HAVE_PROC_CPU
+	bool
+
+config NO_IOPORT_MAP
+	bool
+
+config SBUS
+	bool
+
+config STACKTRACE_SUPPORT
+	bool
+	default y
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
+config ARCH_HAS_ILOG2_U32
+	bool
+
+config ARCH_HAS_ILOG2_U64
+	bool
+
+config ARCH_HAS_BANDGAP
+	bool
+
+config FIX_EARLYCON_MEM
+	def_bool y if MMU
+
+config GENERIC_HWEIGHT
+	bool
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
+config GENERIC_ISA_DMA
+	bool
+
+config FIQ
+	bool
+
+config ARCH_MTD_XIP
+	bool
+
+config ARM_PATCH_PHYS_VIRT
+	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	default y
+	depends on MMU
+	help
+	  Patch phys-to-virt and virt-to-phys translation functions at
+	  boot and module load time according to the position of the
+	  kernel in system memory.
+
+	  This can only be used with non-XIP MMU kernels where the base
+	  of physical memory is at a 2 MiB boundary.
+
+	  Only disable this option if you know that you do not require
+	  this feature (eg, building a kernel for a single machine) and
+	  you need to shrink the kernel to the minimal size.
+
+config NEED_MACH_IO_H
+	bool
+	help
+	  Select this when mach/io.h is required to provide special
+	  definitions for this platform.  The need for mach/io.h should
+	  be avoided when possible.
+
+config NEED_MACH_MEMORY_H
+	bool
+	help
+	  Select this when mach/memory.h is required to provide special
+	  definitions for this platform.  The need for mach/memory.h should
+	  be avoided when possible.
+
+config PHYS_OFFSET
+	hex "Physical address of main memory" if MMU
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
+	default DRAM_BASE if !MMU
+	default 0x00000000 if ARCH_FOOTBRIDGE
+	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+	default 0x30000000 if ARCH_S3C24XX
+	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
+	help
+	  Please provide the physical address corresponding to the
+	  location of main memory in your system.
+
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
+config PGTABLE_LEVELS
+	int
+	default 3 if ARM_LPAE
+	default 2
+
+menu "System Type"
+
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select CPU_V7M
+	select NO_IOPORT_MAP
+
+config ARCH_MMAP_RND_BITS_MIN
+	default 8
+
+config ARCH_MMAP_RND_BITS_MAX
+	default 14 if PAGE_OFFSET=0x40000000
+	default 15 if PAGE_OFFSET=0x80000000
+	default 16
+
+config ARCH_MULTIPLATFORM
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	default y
+	help
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
+
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
+
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+#
+# This is sorted alphabetically by mach-* pathname.  However, plat-*
+# Kconfigs may be included either alphabetically (according to the
+# plat- suffix) or along side the corresponding mach-* source.
+#
+source "arch/arm/mach-actions/Kconfig"
+
+source "arch/arm/mach-alpine/Kconfig"
+
+source "arch/arm/mach-artpec/Kconfig"
+
+source "arch/arm/mach-asm9260/Kconfig"
+
+source "arch/arm/mach-aspeed/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-axxia/Kconfig"
+
+source "arch/arm/mach-bcm/Kconfig"
+
+source "arch/arm/mach-berlin/Kconfig"
+
+source "arch/arm/mach-clps711x/Kconfig"
+
+source "arch/arm/mach-cns3xxx/Kconfig"
+
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-digicolor/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
+source "arch/arm/mach-ep93xx/Kconfig"
+
+source "arch/arm/mach-exynos/Kconfig"
+
+source "arch/arm/mach-footbridge/Kconfig"
+
+source "arch/arm/mach-gemini/Kconfig"
+
+source "arch/arm/mach-highbank/Kconfig"
+
+source "arch/arm/mach-hisi/Kconfig"
+
+source "arch/arm/mach-hpe/Kconfig"
+
+source "arch/arm/mach-imx/Kconfig"
+
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-ixp4xx/Kconfig"
+
+source "arch/arm/mach-keystone/Kconfig"
+
+source "arch/arm/mach-lpc32xx/Kconfig"
+
+source "arch/arm/mach-mediatek/Kconfig"
+
+source "arch/arm/mach-meson/Kconfig"
+
+source "arch/arm/mach-milbeaut/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-moxart/Kconfig"
+
+source "arch/arm/mach-mstar/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
+source "arch/arm/mach-mvebu/Kconfig"
+
+source "arch/arm/mach-mxs/Kconfig"
+
+source "arch/arm/mach-nomadik/Kconfig"
+
+source "arch/arm/mach-npcm/Kconfig"
+
+source "arch/arm/mach-nspire/Kconfig"
+
+source "arch/arm/mach-omap1/Kconfig"
+
+source "arch/arm/mach-omap2/Kconfig"
+
+source "arch/arm/mach-orion5x/Kconfig"
+
+source "arch/arm/mach-oxnas/Kconfig"
+
+source "arch/arm/mach-pxa/Kconfig"
+
+source "arch/arm/mach-qcom/Kconfig"
+
+source "arch/arm/mach-rda/Kconfig"
+
+source "arch/arm/mach-realtek/Kconfig"
+
+source "arch/arm/mach-rpc/Kconfig"
+
+source "arch/arm/mach-rockchip/Kconfig"
+
+source "arch/arm/mach-s3c/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/mach-socfpga/Kconfig"
+
+source "arch/arm/mach-spear/Kconfig"
+
+source "arch/arm/mach-sti/Kconfig"
+
+source "arch/arm/mach-stm32/Kconfig"
+
+source "arch/arm/mach-sunplus/Kconfig"
+
+source "arch/arm/mach-sunxi/Kconfig"
+
+source "arch/arm/mach-tegra/Kconfig"
+
+source "arch/arm/mach-uniphier/Kconfig"
+
+source "arch/arm/mach-ux500/Kconfig"
+
+source "arch/arm/mach-versatile/Kconfig"
+
+source "arch/arm/mach-vt8500/Kconfig"
+
+source "arch/arm/mach-zynq/Kconfig"
+
+# ARMv7-M architecture
+config ARCH_LPC18XX
+	bool "NXP LPC18xx/LPC43xx"
+	depends on ARM_SINGLE_ARMV7M
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select CLKSRC_LPC32XX
+	select PINCTRL
+	help
+	  Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+	  high performance microcontrollers.
+
+config ARCH_MPS2
+	bool "ARM MPS2 platform"
+	depends on ARM_SINGLE_ARMV7M
+	select ARM_AMBA
+	select CLKSRC_MPS2
+	help
+	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
+	  with a range of available cores like Cortex-M3/M4/M7.
+
+	  Please, note that depends which Application Note is used memory map
+	  for the platform may vary, so adjustment of RAM base might be needed.
+
+# Definitions to make life easier
+config ARCH_ACORN
+	bool
+
+config PLAT_ORION
+	bool
+	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+
+config PLAT_ORION_LEGACY
+	bool
+	select PLAT_ORION
+
+config PLAT_VERSATILE
+	bool
+
+source "arch/arm/mm/Kconfig"
+
+config IWMMXT
+	bool "Enable iWMMXt support"
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	help
+	  Enable support for iWMMXt context switching at run time if
+	  running on a CPU that supports it.
+
+if !MMU
+source "arch/arm/Kconfig-nommu"
+endif
+
+config PJ4B_ERRATA_4742
+	bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
+	depends on CPU_PJ4B && MACH_ARMADA_370
+	default y
+	help
+	  When coming out of either a Wait for Interrupt (WFI) or a Wait for
+	  Event (WFE) IDLE states, a specific timing sensitivity exists between
+	  the retiring WFI/WFE instructions and the newly issued subsequent
+	  instructions.  This sensitivity can result in a CPU hang scenario.
+	  Workaround:
+	  The software must insert either a Data Synchronization Barrier (DSB)
+	  or Data Memory Barrier (DMB) command immediately after the WFI/WFE
+	  instruction
+
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
+config ARM_ERRATA_411920
+	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+	depends on CPU_V6 || CPU_V6K
+	help
+	  Invalidation of the Instruction Cache operation can
+	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+	  It does not affect the MPCore. This option enables the ARM Ltd.
+	  recommended workaround.
+
+config ARM_ERRATA_430973
+	bool "ARM errata: Stale prediction on replaced interworking branch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 430973 Cortex-A8
+	  r1p* erratum. If a code sequence containing an ARM/Thumb
+	  interworking branch is replaced with another code sequence at the
+	  same virtual address, whether due to self-modifying code or virtual
+	  to physical address re-mapping, Cortex-A8 does not recover from the
+	  stale interworking branch prediction. This results in Cortex-A8
+	  executing the new code sequence in the incorrect ARM or Thumb state.
+	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+	  and also flushes the branch target cache at every context switch.
+	  Note that setting specific bits in the ACTLR register may not be
+	  available in non-secure mode.
+
+config ARM_ERRATA_458693
+	bool "ARM errata: Processor deadlock when a false hazard is created"
+	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+	  erratum. For very specific sequences of memory operations, it is
+	  possible for a hazard condition intended for a cache line to instead
+	  be incorrectly associated with a different cache line. This false
+	  hazard might then cause a processor deadlock. The workaround enables
+	  the L1 caching of the NEON accesses and disables the PLD instruction
+	  in the ACTLR register. Note that setting specific bits in the ACTLR
+	  register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+	  erratum. Any asynchronous access to the L2 cache may encounter a
+	  situation in which recent store transactions to the L2 cache are lost
+	  and overwritten with stale memory contents from external memory. The
+	  workaround disables the write-allocate mode for the L2 cache via the
+	  ACTLR register. Note that setting specific bits in the ACTLR register
+	  may not be available in non-secure mode.
+
+config ARM_ERRATA_742230
+	bool "ARM errata: DMB operation may be faulty"
+	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  This option enables the workaround for the 742230 Cortex-A9
+	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+	  between two write operations may not ensure the correct visibility
+	  ordering of the two writes. This workaround sets a specific bit in
+	  the diagnostic register of the Cortex-A9 which causes the DMB
+	  instruction to behave as a DSB, ensuring the correct behaviour of
+	  the two writes.
+
+config ARM_ERRATA_742231
+	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  This option enables the workaround for the 742231 Cortex-A9
+	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
+	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+	  accessing some data located in the same cache line, may get corrupted
+	  data due to bad handling of the address hazard when the line gets
+	  replaced from one of the CPUs at the same time as another CPU is
+	  accessing it. This workaround sets specific bits in the diagnostic
+	  register of the Cortex-A9 which reduces the linefill issuing
+	  capabilities of the processor.
+
+config ARM_ERRATA_643719
+	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
+	depends on CPU_V7 && SMP
+	default y
+	help
+	  This option enables the workaround for the 643719 Cortex-A9 (prior to
+	  r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
+	  register returns zero when it should return one. The workaround
+	  corrects this value, ensuring cache maintenance operations which use
+	  it behave as intended and avoiding data corruption.
+
+config ARM_ERRATA_720789
+	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 720789 Cortex-A9 (prior to
+	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
+	  broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
+	  As a consequence of this erratum, some TLB entries which should be
+	  invalidated are not, resulting in an incoherency in the system page
+	  tables. The workaround changes the TLB flushing routines to invalidate
+	  entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  This option enables the workaround for the 743622 Cortex-A9
+	  (r2p*) erratum. Under very rare conditions, a faulty
+	  optimisation in the Cortex-A9 Store Buffer may lead to data
+	  corruption. This workaround sets a specific bit in the diagnostic
+	  register of the Cortex-A9 which disables the Store Buffer
+	  optimisation, preventing the defect from occurring. This has no
+	  visible impact on the overall performance or power consumption of the
+	  processor.
+
+config ARM_ERRATA_751472
+	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
+	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  This option enables the workaround for the 751472 Cortex-A9 (prior
+	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
+	  completion of a following broadcasted operation if the second
+	  operation is received by a CPU before the ICIALLUIS has completed,
+	  potentially leading to corrupted entries in the cache or TLB.
+
+config ARM_ERRATA_754322
+	bool "ARM errata: possible faulty MMU translations following an ASID switch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+	  r3p*) erratum. A speculative memory access may cause a page table walk
+	  which starts prior to an ASID switch but completes afterwards. This
+	  can populate the micro-TLB with a stale entry which may be hit with
+	  the new ASID. This workaround places two dsb instructions in the mm
+	  switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+	bool "ARM errata: no automatic Store Buffer drain"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 754327 Cortex-A9 (prior to
+	  r2p0) erratum. The Store Buffer does not have any automatic draining
+	  mechanism and therefore a livelock may occur if an external agent
+	  continuously polls a memory location waiting to observe an update.
+	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
+	  written polling loops from denying visibility of updates to memory.
+
+config ARM_ERRATA_364296
+	bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+	depends on CPU_V6
+	help
+	  This options enables the workaround for the 364296 ARM1136
+	  r0p2 erratum (possible cache data corruption with
+	  hit-under-miss enabled). It sets the undocumented bit 31 in
+	  the auxiliary control register and the FI bit in the control
+	  register, thus disabling hit-under-miss without putting the
+	  processor into full low interrupt latency mode. ARM11MPCore
+	  is not affected.
+
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex A-9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
+config ARM_ERRATA_775420
+       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+       depends on CPU_V7
+       help
+	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance
+	 operation aborts with MMU exception, it might cause the processor
+	 to deadlock. This workaround puts DSB before executing ISB if
+	 an abort may occur on cache maintenance.
+
+config ARM_ERRATA_798181
+	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+	depends on CPU_V7 && SMP
+	help
+	  On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+	  adequately shooting down all use of the old entries. This
+	  option enables the Linux kernel workaround for this erratum
+	  which sends an IPI to the CPUs that are running the same ASID
+	  as the one being invalidated.
+
+config ARM_ERRATA_773022
+	bool "ARM errata: incorrect instructions may be executed from loop buffer"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 773022 Cortex-A15
+	  (up to r0p4) erratum. In certain rare sequences of code, the
+	  loop buffer may deliver incorrect instructions. This
+	  workaround disables the loop buffer to avoid the erratum.
+
+config ARM_ERRATA_818325_852422
+	bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM
+	    instruction might deadlock.  Fixed in r0p1.
+	  - Cortex-A12 852422: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A12 cores yet.
+	  This workaround for all both errata involves setting bit[12] of the
+	  Feature Register. This bit disables an optimisation applied to a
+	  sequence of 2 instructions that use opposing condition codes.
+
+config ARM_ERRATA_821420
+	bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 821420 Cortex-A12
+	  (all revs) erratum. In very rare timing conditions, a sequence
+	  of VMOV to Core registers instructions, for which the second
+	  one is in the shadow of a branch or abort, can lead to a
+	  deadlock when the VMOV instructions are issued out-of-order.
+
+config ARM_ERRATA_825619
+	bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 825619 Cortex-A12
+	  (all revs) erratum. Within rare timing constraints, executing a
+	  DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
+	  and Device/Strongly-Ordered loads and stores might cause deadlock
+
+config ARM_ERRATA_857271
+	bool "ARM errata: A12: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857271 Cortex-A12
+	  (all revs) erratum. Under very rare timing conditions, the CPU might
+	  hang. The workaround is expected to have a < 1% performance impact.
+
+config ARM_ERRATA_852421
+	bool "ARM errata: A17: DMB ST might fail to create order between stores"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 852421 Cortex-A17
+	  (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions,
+	  execution of a DMB ST instruction might fail to properly order
+	  stores from GroupA and stores from GroupB.
+
+config ARM_ERRATA_852423
+	bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A17 852423: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A17 cores yet.
+	  This is identical to Cortex-A12 erratum 852422.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
+config ARM_ERRATA_857272
+	bool "ARM errata: A17: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857272 Cortex-A17 erratum.
+	  This erratum is not known to be fixed in any A17 revision.
+	  This is identical to Cortex-A12 erratum 857271.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
+endmenu
+
+source "arch/arm/common/Kconfig"
+
+menu "Bus support"
+
+config ISA
+	bool
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+# Select ISA DMA interface
+config ISA_DMA_API
+	bool
+
+config PCI_NANOENGINE
+	bool "BSE nanoEngine PCI support"
+	depends on SA1100_NANOENGINE
+	help
+	  Enable PCI on the BSE nanoEngine board.
+
+config ARM_ERRATA_814220
+	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
+	depends on CPU_V7
+	help
+	  The v7 ARM states that all cache and branch predictor maintenance
+	  operations that do not specify an address execute, relative to
+	  each other, in program order.
+	  However, because of this erratum, an L2 set/way cache maintenance
+	  operation can overtake an L1 set/way cache maintenance operation.
+	  This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
+	  r0p4, r0p5.
+
+endmenu
+
+menu "Kernel Features"
+
+config HAVE_SMP
+	bool
+	help
+	  This option should be selected by machines which have an SMP-
+	  capable CPU.
+
+	  The only effect of this option is to make the SMP-related
+	  options available to the user for configuration.
+
+config SMP
+	bool "Symmetric Multi-Processing"
+	depends on CPU_V6K || CPU_V7
+	depends on HAVE_SMP
+	depends on MMU || ARM_MPU
+	select IRQ_WORK
+	help
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.
+
+	  If you say N here, the kernel will run on uni- and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  uniprocessor machines. On a uniprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
+	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
+
+	  If you don't know what to do here, say N.
+
+config SMP_ON_UP
+	bool "Allow booting SMP kernel on uniprocessor systems"
+	depends on SMP && MMU
+	default y
+	help
+	  SMP kernels contain instructions which fail on non-SMP processors.
+	  Enabling this option allows the kernel to modify itself to make
+	  these instructions safe.  Disabling it allows about 1K of space
+	  savings.
+
+	  If you don't know what to do here, say Y.
+
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
+config ARM_CPU_TOPOLOGY
+	bool "Support cpu topology definition"
+	depends on SMP && CPU_V7
+	default y
+	help
+	  Support ARM cpu topology definition. The MPIDR register defines
+	  affinity between processors which is then used to describe the cpu
+	  topology of an ARM System.
+
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	depends on ARM_CPU_TOPOLOGY
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+	bool "SMT scheduler support"
+	depends on ARM_CPU_TOPOLOGY
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config HAVE_ARM_SCU
+	bool
+	help
+	  This option enables support for the ARM snoop control unit
+
+config HAVE_ARM_ARCH_TIMER
+	bool "Architected timer support"
+	depends on CPU_V7
+	select ARM_ARCH_TIMER
+	help
+	  This option enables support for the ARM architected timer
+
+config HAVE_ARM_TWD
+	bool
+	help
+	  This options enables support for the ARM timer and watchdog unit
+
+config MCPM
+	bool "Multi-Cluster Power Management"
+	depends on CPU_V7 && SMP
+	help
+	  This option provides the common power management infrastructure
+	  for (multi-)cluster based systems, such as big.LITTLE based
+	  systems.
+
+config MCPM_QUAD_CLUSTER
+	bool
+	depends on MCPM
+	help
+	  To avoid wasting resources unnecessarily, MCPM only supports up
+	  to 2 clusters by default.
+	  Platforms with 3 or 4 clusters that use MCPM must select this
+	  option to allow the additional clusters to be managed.
+
+config BIG_LITTLE
+	bool "big.LITTLE support (Experimental)"
+	depends on CPU_V7 && SMP
+	select MCPM
+	help
+	  This option enables support selections for the big.LITTLE
+	  system architecture.
+
+config BL_SWITCHER
+	bool "big.LITTLE switcher support"
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
+	select CPU_PM
+	help
+	  The big.LITTLE "switcher" provides the core functionality to
+	  transparently handle transition between a cluster of A15's
+	  and a cluster of A7's in a big.LITTLE system.
+
+config BL_SWITCHER_DUMMY_IF
+	tristate "Simple big.LITTLE switcher user interface"
+	depends on BL_SWITCHER && DEBUG_KERNEL
+	help
+	  This is a simple and dummy char dev interface to control
+	  the big.LITTLE switcher core code.  It is meant for
+	  debugging purposes only.
+
+choice
+	prompt "Memory split"
+	depends on MMU
+	default VMSPLIT_3G
+	help
+	  Select the desired split between kernel and user memory.
+
+	  If you are not absolutely sure what you are doing, leave this
+	  option alone!
+
+	config VMSPLIT_3G
+		bool "3G/1G user/kernel split"
+	config VMSPLIT_3G_OPT
+		depends on !ARM_LPAE
+		bool "3G/1G user/kernel split (for full 1G low memory)"
+	config VMSPLIT_2G
+		bool "2G/2G user/kernel split"
+	config VMSPLIT_1G
+		bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+	hex
+	default PHYS_OFFSET if !MMU
+	default 0x40000000 if VMSPLIT_1G
+	default 0x80000000 if VMSPLIT_2G
+	default 0xB0000000 if VMSPLIT_3G_OPT
+	default 0xC0000000
+
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0x8f000000 if PAGE_OFFSET=0xB0000000
+	default 0xffffffff
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 16 if DEBUG_KMAP_LOCAL
+	range 2 32 if !DEBUG_KMAP_LOCAL
+	depends on SMP
+	default "4"
+	help
+	  The maximum number of CPUs that the kernel can support.
+	  Up to 32 CPUs can be supported, or up to 16 if kmap_local()
+	  debugging is enabled, which uses half of the per-CPU fixmap
+	  slots as guard regions.
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	select GENERIC_IRQ_MIGRATION
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+config ARM_PSCI
+	bool "Support for the ARM Power State Coordination Interface (PSCI)"
+	depends on HAVE_ARM_SMCCC
+	select ARM_PSCI_FW
+	help
+	  Say Y here if you want Linux to communicate with system firmware
+	  implementing the PSCI specification for CPU-centric power
+	  management operations described in ARM document number ARM DEN
+	  0022A ("Power State Coordination Interface System Software on
+	  ARM processors").
+
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
+config ARCH_NR_GPIO
+	int
+	default 2048 if ARCH_INTEL_SOCFPGA
+	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
+		ARCH_ZYNQ || ARCH_ASPEED
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
+		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+	default 416 if ARCH_SUNXI
+	default 392 if ARCH_U8500
+	default 352 if ARCH_VT8500
+	default 288 if ARCH_ROCKCHIP
+	default 264 if MACH_H4700
+	default 0
+	help
+	  Maximum number of GPIOs in the system.
+
+	  If unsure, leave the default value.
+
+config HZ_FIXED
+	int
+	default 128 if SOC_AT91RM9200
+	default 0
+
+choice
+	depends on HZ_FIXED = 0
+	prompt "Timer frequency"
+
+config HZ_100
+	bool "100 Hz"
+
+config HZ_200
+	bool "200 Hz"
+
+config HZ_250
+	bool "250 Hz"
+
+config HZ_300
+	bool "300 Hz"
+
+config HZ_500
+	bool "500 Hz"
+
+config HZ_1000
+	bool "1000 Hz"
+
+endchoice
+
+config HZ
+	int
+	default HZ_FIXED if HZ_FIXED != 0
+	default 100 if HZ_100
+	default 200 if HZ_200
+	default 250 if HZ_250
+	default 300 if HZ_300
+	default 500 if HZ_500
+	default 1000
+
+config SCHED_HRTICK
+	def_bool HIGH_RES_TIMERS
+
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
+	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
+	default y if CPU_THUMBONLY
+	select ARM_UNWIND
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode.
+
+	  If unsure, say N.
+
+config ARM_PATCH_IDIV
+	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
+	depends on CPU_32v7
+	default y
+	help
+	  The ARM compiler inserts calls to __aeabi_idiv() and
+	  __aeabi_uidiv() when it needs to perform division on signed
+	  and unsigned integers. Some v7 CPUs have support for the sdiv
+	  and udiv instructions that can be used to implement those
+	  functions.
+
+	  Enabling this option allows the kernel to modify itself to
+	  replace the first two instructions of these library functions
+	  with the sdiv or udiv plus "bx lr" instructions when the CPU
+	  it is running on supports them. Typically this will be faster
+	  and less power intensive than running the original library
+	  code to do integer division.
+
+config AEABI
+	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \
+		!CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG
+	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG
+	help
+	  This option allows for the kernel to be compiled using the latest
+	  ARM ABI (aka EABI).  This is only useful if you are using a user
+	  space environment that is also compiled with EABI.
+
+	  Since there are major incompatibilities between the legacy ABI and
+	  EABI, especially with regard to structure member alignment, this
+	  option also changes the kernel syscall calling convention to
+	  disambiguate both ABIs and allow for backward compatibility support
+	  (selected with CONFIG_OABI_COMPAT).
+
+	  To use this you need GCC version 4.0.0 or later.
+
+config OABI_COMPAT
+	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
+	depends on AEABI && !THUMB2_KERNEL
+	help
+	  This option preserves the old syscall interface along with the
+	  new (ARM EABI) one. It also provides a compatibility layer to
+	  intercept syscalls that have structure arguments which layout
+	  in memory differs between the legacy ABI and the new ARM EABI
+	  (only for non "thumb" binaries). This option adds a tiny
+	  overhead to all syscalls and produces a slightly larger kernel.
+
+	  The seccomp filter system will not be available when this is
+	  selected, since there is no way yet to sensibly distinguish
+	  between calling conventions during filtering.
+
+	  If you know you'll be using only pure EABI user space then you
+	  can say N here. If this option is not selected and you attempt
+	  to execute a legacy ABI binary then the result will be
+	  UNPREDICTABLE (in fact it can be predicted that it won't work
+	  at all). If in doubt say N.
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
+config ARCH_FLATMEM_ENABLE
+	def_bool !(ARCH_RPC || ARCH_SA1100)
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool !ARCH_FOOTBRIDGE
+	select SPARSEMEM_STATIC if SPARSEMEM
+
+config HIGHMEM
+	bool "High Memory Support"
+	depends on MMU
+	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
+	help
+	  The address space of ARM processors is only 4 Gigabytes large
+	  and it has to accommodate user address space, kernel address
+	  space as well as some memory mapped IO. That means that, if you
+	  have a large amount of physical memory and/or IO, not all of the
+	  memory can be "permanently mapped" by the kernel. The physical
+	  memory that is not permanently mapped is called "high memory".
+
+	  Depending on the selected kernel/user memory split, minimum
+	  vmalloc space and actual amount of RAM, you may not need this
+	  option which should result in a slightly faster kernel.
+
+	  If unsure, say n.
+
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
+	depends on HIGHMEM
+	default y
+	help
+	  The VM uses one page of physical memory for each page table.
+	  For systems with a lot of processes, this can use a lot of
+	  precious low memory, eventually leading to low memory being
+	  consumed by page tables.  Setting this option will allow
+	  user-space 2nd level page tables to reside in high memory.
+
+config CPU_SW_DOMAIN_PAN
+	bool "Enable use of CPU domains to implement privileged no-access"
+	depends on MMU && !ARM_LPAE
+	default y
+	help
+	  Increase kernel security by ensuring that normal kernel accesses
+	  are unable to access userspace addresses.  This can help prevent
+	  use-after-free bugs becoming an exploitable privilege escalation
+	  by ensuring that magic values (such as LIST_POISON) will always
+	  fault when dereferenced.
+
+	  CPUs with low-vector mappings use a best-efforts implementation.
+	  Their lower 1MB needs to remain accessible for the vectors, but
+	  the remainder of userspace will become appropriately inaccessible.
+
+config HW_PERF_EVENTS
+	def_bool y
+	depends on ARM_PMU
+
+config ARM_MODULE_PLTS
+	bool "Use PLTs to allow module memory to spill over into vmalloc area"
+	depends on MODULES
+	select KASAN_VMALLOC if KASAN
+	default y
+	help
+	  Allocate PLTs when loading modules so that jumps and calls whose
+	  targets are too far away for their relative offsets to be encoded
+	  in the instructions themselves can be bounced via veneers in the
+	  module's PLT. This allows modules to be allocated in the generic
+	  vmalloc area after the dedicated module memory area has been
+	  exhausted. The modules will use slightly more memory, but after
+	  rounding up to page size, the actual memory footprint is usually
+	  the same.
+
+	  Disabling this is usually safe for small single-platform
+	  configurations. If unsure, say y.
+
+config ARCH_FORCE_MAX_ORDER
+	int "Maximum zone order"
+	default "12" if SOC_AM33XX
+	default "9" if SA1111
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+config ALIGNMENT_TRAP
+	def_bool CPU_CP15_MMU
+	select HAVE_PROC_CPU if PROC_FS
+	help
+	  ARM processors cannot fetch/store information which is not
+	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
+	  address divisible by 4. On 32-bit ARM processors, these non-aligned
+	  fetch/store instructions will be emulated in software if you say
+	  here, which has a severe performance impact. This is necessary for
+	  correct operation of some network protocols. With an IP-only
+	  configuration it is safe to say N, otherwise say Y.
+
+config UACCESS_WITH_MEMCPY
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
+	depends on MMU
+	default y if CPU_FEROCEON
+	help
+	  Implement faster copy_to_user and clear_user methods for CPU
+	  cores where a 8-word STM instruction give significantly higher
+	  memory write throughput than a sequence of individual 32bit stores.
+
+	  A possible side effect is a slight increase in scheduling latency
+	  between threads sharing the same address space if they invoke
+	  such copy operations with large buffers.
+
+	  However, if the CPU data cache is using a write-allocate mode,
+	  this option is unlikely to provide any performance gain.
+
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
+config XEN_DOM0
+	def_bool y
+	depends on XEN
+
+config XEN
+	bool "Xen guest support on ARM"
+	depends on ARM && AEABI && OF
+	depends on CPU_V7 && !CPU_V6
+	depends on !GENERIC_ATOMIC64
+	depends on MMU
+	select ARCH_DMA_ADDR_T_64BIT
+	select ARM_PSCI
+	select SWIOTLB
+	select SWIOTLB_XEN
+	select PARAVIRT
+	help
+	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
+
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	bool "Use a unique stack canary value for each task"
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
+	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
+	default y
+	help
+	  Due to the fact that GCC uses an ordinary symbol reference from
+	  which to load the value of the stack canary, this value can only
+	  change at reboot time on SMP systems, and all tasks running in the
+	  kernel's address space are forced to use the same canary value for
+	  the entire duration that the system is up.
+
+	  Enable this option to switch to a different method that uses a
+	  different canary value for each task.
+
+endmenu
+
+menu "Boot options"
+
+config USE_OF
+	bool "Flattened Device Tree support"
+	select IRQ_DOMAIN
+	select OF
+	help
+	  Include support for flattened device tree machine descriptions.
+
+config ATAGS
+	bool "Support for the traditional ATAGS boot data passing"
+	default y
+	help
+	  This is the traditional way of passing data to the kernel at boot
+	  time. If you are solely relying on the flattened device tree (or
+	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
+	  to remove ATAGS support from your kernel binary.
+
+config UNUSED_BOARD_FILES
+	bool "Board support for machines without known users"
+	depends on ATAGS
+	help
+	  Most ATAGS based board files are completely unused and are
+	  scheduled for removal in early 2023, and left out of kernels
+	  by default now.  If you are using a board file that is marked
+	  as unused, turn on this option to build support into the kernel.
+
+	  To keep support for your individual board from being removed,
+	  send a reply to the email discussion at
+	  https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
+
+config DEPRECATED_PARAM_STRUCT
+	bool "Provide old way to pass kernel parameters"
+	depends on ATAGS
+	help
+	  This was deprecated in 2001 and announced to live on for 5 years.
+	  Some old boot loaders still use this way.
+
+# Compressed boot loader in ROM.  Yes, we really want to ask about
+# TEXT and BSS so we preserve their values in the config files.
+config ZBOOT_ROM_TEXT
+	hex "Compressed ROM boot loader base address"
+	default 0x0
+	help
+	  The physical address at which the ROM-able zImage is to be
+	  placed in the target.  Platforms which normally make use of
+	  ROM-able zImage formats normally set this to a suitable
+	  value in their defconfig file.
+
+	  If ZBOOT_ROM is not enabled, this has no effect.
+
+config ZBOOT_ROM_BSS
+	hex "Compressed ROM boot loader BSS address"
+	default 0x0
+	help
+	  The base address of an area of read/write memory in the target
+	  for the ROM-able zImage which must be available while the
+	  decompressor is running. It must be large enough to hold the
+	  entire decompressed kernel plus an additional 128 KiB.
+	  Platforms which normally make use of ROM-able zImage formats
+	  normally set this to a suitable value in their defconfig file.
+
+	  If ZBOOT_ROM is not enabled, this has no effect.
+
+config ZBOOT_ROM
+	bool "Compressed boot loader in ROM/flash"
+	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
+	depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
+	help
+	  Say Y here if you intend to execute your compressed kernel image
+	  (zImage) directly from ROM or flash.  If unsure, say N.
+
+config ARM_APPENDED_DTB
+	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+	depends on OF
+	help
+	  With this option, the boot code will look for a device tree binary
+	  (DTB) appended to zImage
+	  (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+	  This is meant as a backward compatibility convenience for those
+	  systems with a bootloader that can't be upgraded to accommodate
+	  the documented boot protocol using a device tree.
+
+	  Beware that there is very little in terms of protection against
+	  this option being confused by leftover garbage in memory that might
+	  look like a DTB header after a reboot if no actual DTB is appended
+	  to zImage.  Do not leave this option active in a production kernel
+	  if you don't intend to always append a DTB.  Proper passing of the
+	  location into r2 of a bootloader provided DTB is always preferable
+	  to this option.
+
+config ARM_ATAG_DTB_COMPAT
+	bool "Supplement the appended DTB with traditional ATAG information"
+	depends on ARM_APPENDED_DTB
+	help
+	  Some old bootloaders can't be updated to a DTB capable one, yet
+	  they provide ATAGs with memory configuration, the ramdisk address,
+	  the kernel cmdline string, etc.  Such information is dynamically
+	  provided by the bootloader and can't always be stored in a static
+	  DTB.  To allow a device tree enabled kernel to be used with such
+	  bootloaders, this option allows zImage to extract the information
+	  from the ATAG list and store it at run time into the appended DTB.
+
+choice
+	prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+	default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader instead of
+	  the device tree bootargs property. If the boot loader doesn't provide
+	  any, the device tree bootargs property will be used.
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
+	bool "Extend with bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the the device tree bootargs property.
+
+endchoice
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  On some architectures (e.g. CATS), there is currently no way
+	  for the boot loader to pass arguments to the kernel. For these
+	  architectures, you should supply some command-line options at build
+	  time by entering them here. As a minimum, you should specify the
+	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the default kernel command string.
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+endchoice
+
+config XIP_KERNEL
+	bool "Kernel Execute-In-Place from ROM"
+	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
+	help
+	  Execute-In-Place allows the kernel to run from non-volatile storage
+	  directly addressable by the CPU, such as NOR flash. This saves RAM
+	  space since the text section of the kernel is not loaded from flash
+	  to RAM.  Read-write sections, such as the data section and stack,
+	  are still copied to RAM.  The XIP kernel is not compressed since
+	  it has to run directly from flash, so it will take more space to
+	  store it.  The flash address used to link the kernel object files,
+	  and for storing it, is configuration dependent. Therefore, if you
+	  say Y here, you must know the proper physical address where to
+	  store the kernel image depending on your own flash memory usage.
+
+	  Also note that the make target becomes "make xipImage" rather than
+	  "make zImage" or "make Image".  The final kernel binary to put in
+	  ROM memory will be arch/arm/boot/xipImage.
+
+	  If unsure, say N.
+
+config XIP_PHYS_ADDR
+	hex "XIP Kernel Physical Location"
+	depends on XIP_KERNEL
+	default "0x00080000"
+	help
+	  This is the physical address in your flash memory the kernel will
+	  be linked for and stored to.  This address is dependent on your
+	  own flash usage.
+
+config XIP_DEFLATED_DATA
+	bool "Store kernel .data section compressed in ROM"
+	depends on XIP_KERNEL
+	select ZLIB_INFLATE
+	help
+	  Before the kernel is actually executed, its .data section has to be
+	  copied to RAM from ROM. This option allows for storing that data
+	  in compressed form and decompressed to RAM rather than merely being
+	  copied, saving some precious ROM space. A possible drawback is a
+	  slightly longer boot delay.
+
+config KEXEC
+	bool "Kexec system call (EXPERIMENTAL)"
+	depends on (!SMP || PM_SLEEP_SMP)
+	depends on MMU
+	select KEXEC_CORE
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.
+
+config ATAGS_PROC
+	bool "Export atags in procfs"
+	depends on ATAGS && KEXEC
+	default y
+	help
+	  Should the atags used to boot the kernel be exported in an "atags"
+	  file in procfs. Useful with kexec.
+
+config CRASH_DUMP
+	bool "Build kdump crash kernel (EXPERIMENTAL)"
+	help
+	  Generate crash dump after being started by kexec. This should
+	  be normally only set in special crash dump kernels which are
+	  loaded in the main kernel with kexec-tools into a specially
+	  reserved region and then later executed after a crash by
+	  kdump/kexec. The crash dump kernel must be compiled to a
+	  memory address not used by the main kernel
+
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
+
+config AUTO_ZRELADDR
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	help
+	  ZRELADDR is the physical address where the decompressed kernel
+	  image will be placed. If AUTO_ZRELADDR is selected, the address
+	  will be determined at run-time, either by masking the current IP
+	  with 0xf8000000, or, if invalid, from the DTB passed in r2.
+	  This assumes the zImage being placed in the first 128MB from
+	  start of memory.
+
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_STUB
+	select EFI_GENERIC_STUB
+	select EFI_RUNTIME_WRAPPERS
+	help
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+	  clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful for kernels that may run on systems that have
+	  UEFI firmware.
+
+config DMI
+	bool "Enable support for SMBIOS (DMI) tables"
+	depends on EFI
+	default y
+	help
+	  This enables SMBIOS/DMI feature for systems.
+
+	  This option is only useful on systems that have UEFI firmware.
+	  However, even with this option, the resultant kernel should
+	  continue to boot on existing non-UEFI platforms.
+
+	  NOTE: This does *NOT* enable or encourage the use of DMI quirks,
+	  i.e., the the practice of identifying the platform via DMI to
+	  decide whether certain workarounds for buggy hardware and/or
+	  firmware need to be enabled. This would require the DMI subsystem
+	  to be enabled much earlier than we do on ARM, which is non-trivial.
+
+endmenu
+
+menu "CPU Power Management"
+
+source "drivers/cpufreq/Kconfig"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
+menu "Floating point emulation"
+
+comment "At least one emulation must be selected"
+
+config FPE_NWFPE
+	bool "NWFPE math emulation"
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
+	help
+	  Say Y to include the NWFPE floating point emulator in the kernel.
+	  This is necessary to run most binaries. Linux does not currently
+	  support floating point hardware so you need to say Y here even if
+	  your machine has an FPA or floating point co-processor podule.
+
+	  You may say N here if you are going to load the Acorn FPEmulator
+	  early in the bootup.
+
+config FPE_NWFPE_XP
+	bool "Support extended precision"
+	depends on FPE_NWFPE
+	help
+	  Say Y to include 80-bit support in the kernel floating-point
+	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
+	  Note that gcc does not generate 80-bit operations by default,
+	  so in most cases this option only enlarges the size of the
+	  floating point emulator without any good reason.
+
+	  You almost surely want to say N here.
+
+config FPE_FASTFPE
+	bool "FastFPE math emulation (EXPERIMENTAL)"
+	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
+	help
+	  Say Y here to include the FAST floating point emulator in the kernel.
+	  This is an experimental much faster emulator which now also has full
+	  precision for the mantissa.  It does not support any exceptions.
+	  It is very simple, and approximately 3-6 times faster than NWFPE.
+
+	  It should be sufficient for most programs.  It may be not suitable
+	  for scientific calculations, but you have to check this for yourself.
+	  If you do not feel you need a faster FP emulation you should better
+	  choose NWFPE.
+
+config VFP
+	bool "VFP-format floating point maths"
+	depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+	help
+	  Say Y to include VFP support code in the kernel. This is needed
+	  if your hardware includes a VFP unit.
+
+	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
+	  release notes and additional status information.
+
+	  Say N if your target does not have VFP hardware.
+
+config VFPv3
+	bool
+	depends on VFP
+	default y if CPU_V7
+
+config NEON
+	bool "Advanced SIMD (NEON) Extension support"
+	depends on VFPv3 && CPU_V7
+	help
+	  Say Y to include support code for NEON, the ARMv7 Advanced SIMD
+	  Extension.
+
+config KERNEL_MODE_NEON
+	bool "Support for NEON in kernel mode"
+	depends on NEON && AEABI
+	help
+	  Say Y to include support for NEON in kernel mode.
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+config ARCH_SUSPEND_POSSIBLE
+	depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
+		CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
+	def_bool y
+
+config ARM_CPU_SUSPEND
+	def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
+	depends on ARCH_SUSPEND_POSSIBLE
+
+config ARCH_HIBERNATION_POSSIBLE
+	bool
+	depends on MMU
+	default y if ARCH_SUSPEND_POSSIBLE
+
+endmenu
+
+source "arch/arm/Kconfig.assembler"