Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 643 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
new file mode 100644
index 000000000..02a9dc479
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based Monk board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Monk board which is based on
+ * Samsung Exynos3250 SoC.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	model = "Samsung Monk board";
+	compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		i2c7 = &i2c_max77836;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1ff00000>;
+	};
+
+	firmware@205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205F000 0x1000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vemmc_reg: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_EMMC_2.8V-fixed";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	i2c_max77836: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max77836: pmic@25 {
+			compatible = "maxim,max77836";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_NONE>;
+			reg = <0x25>;
+			wakeup-source;
+
+			extcon {
+				compatible = "maxim,max77836-muic";
+			};
+
+			regulators {
+				compatible = "maxim,max77836-regulator";
+				safeout_reg: SAFEOUT {
+					regulator-name = "SAFEOUT";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <45000>;
+					regulator-max-microamp = <475000>;
+					regulator-boot-on;
+				};
+
+				motor_reg: LDO1 {
+					regulator-name = "MOT_2.7V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <2700000>;
+				};
+
+				LDO2 {
+					regulator-name = "UNUSED_LDO2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <3950000>;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77836-charger";
+
+				maxim,constant-uvolt = <4350000>;
+				maxim,fast-charge-uamp = <225000>;
+				maxim,eoc-uamp = <7500>;
+				maxim,ovp-uvolt = <6500000>;
+			};
+		};
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Correspond to 500MHz at freq_table */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Correspond to 200MHz at freq_table */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+
+	thermistor-ap {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 1>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&exynos_usbphy {
+	vbus-supply = <&safeout_reg>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x66>;
+		wakeup-source;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VAP_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VAP_M1_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_AP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VAP_AVDD_PLL1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VAP_PLL_ISO_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VAP_MIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VAP_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VAP_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "V_LPDDR_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "UNUSED_LDO10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "V_EMMC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "V_EMMC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VSENSOR_2.85V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "UNUSED_LDO14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "LCD_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "UNUSED_LDO17";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "UNUSED_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "LCD_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "UNUSED_LDO21";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "UNUSED_LDO22";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "UNUSED_LDO23";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "UNUSED_LDO24";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VAP_MIF_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VAP_ARM_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VAP_INT3D_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VCC_SUB_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77836-battery";
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x36>;
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&mshc_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	broken-cd;
+	non-removable;
+	cap-mmc-highspeed;
+	desc-num = <4>;
+	mmc-hs200-1_8v;
+	card-detect-delay = <200>;
+	vmmc-supply = <&vemmc_reg>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, DOWN);
+		PIN_SLP(gpa0-1, INPUT, DOWN);
+		PIN_SLP(gpa0-2, INPUT, DOWN);
+		PIN_SLP(gpa0-3, INPUT, DOWN);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, PREV, NONE);
+		PIN_SLP(gpb-1, PREV, NONE);
+		PIN_SLP(gpb-2, PREV, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpe0-0, PREV, NONE);
+		PIN_SLP(gpe0-1, PREV, NONE);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, PREV, NONE);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, PREV, NONE);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, INPUT, DOWN);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+		PIN_SLP(gpe1-5, INPUT, DOWN);
+		PIN_SLP(gpe1-6, INPUT, DOWN);
+		PIN_SLP(gpe1-7, INPUT, NONE);
+
+		PIN_SLP(gpe2-0, INPUT, NONE);
+		PIN_SLP(gpe2-1, INPUT, NONE);
+		PIN_SLP(gpe2-2, INPUT, NONE);
+
+		PIN_SLP(gpk0-0, INPUT, DOWN);
+		PIN_SLP(gpk0-1, INPUT, DOWN);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, INPUT, DOWN);
+		PIN_SLP(gpk0-4, INPUT, DOWN);
+		PIN_SLP(gpk0-5, INPUT, DOWN);
+		PIN_SLP(gpk0-6, INPUT, DOWN);
+		PIN_SLP(gpk0-7, INPUT, DOWN);
+
+		PIN_SLP(gpk1-0, PREV, NONE);
+		PIN_SLP(gpk1-1, PREV, NONE);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, DOWN);
+		PIN_SLP(gpm1-3, INPUT, DOWN);
+		PIN_SLP(gpm1-4, INPUT, DOWN);
+		PIN_SLP(gpm1-5, INPUT, DOWN);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, DOWN);
+		PIN_SLP(gpm2-1, INPUT, DOWN);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, INPUT, DOWN);
+		PIN_SLP(gpm3-1, INPUT, DOWN);
+		PIN_SLP(gpm3-2, INPUT, DOWN);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+	};
+};