Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 445 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
new file mode 100644
index 000000000..64102b664
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1H Qseven board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7742-iwg21m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
+	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
+
+	aliases {
+		serial2 = &scifa2;
+		serial4 = &scifb2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sdhi2_led {
+			label = "sdio-led";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	lvds-receiver {
+		compatible = "ti,ds90cf384a", "lvds-decoder";
+		power-supply = <&vcc_3v3_tft1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_receiver_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_receiver_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		backlight = <&lcd_backlight>;
+		power-supply = <&vcc_3v3_tft1>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_receiver_out>;
+			};
+		};
+	};
+
+	reg_1p5v: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	vcc_3v3_tft1: regulator-panel {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc-3v3-tft1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		startup-delay-us = <500>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&audio_clock>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p5v>;
+	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		/* GP1_29 is also shared with audio codec reset pin */
+		reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc_3v3_tft1>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&du {
+	status = "okay";
+};
+
+&gpio0 {
+	touch-interrupt-hog {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
+&gpio1 {
+	can-trx-en-hog {
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can-trx-en-gpio";
+	};
+};
+
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lvds0 {
+	status = "okay";
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_receiver_in>;
+			};
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+
+	flash1: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x00000000 0x00200000>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	/* Disable hsusb to enable USB2.0 host mode support on J2 */
+	/* status = "okay"; */
+};
+
+&pci1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pci2 {
+	/* Disable xhci to enable USB2.0 host mode support on J23 bottom port */
+	/* status = "okay"; */
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec {
+	/* SW2[6] determines which connector is activated
+	 * ON = PCIe X4 (connector-J7)
+	 * OFF = mini-PCIe (connector-J26)
+	 */
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	backlight_pins: backlight {
+		groups = "tpu0_to2";
+		function = "tpu0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data_b";
+		function = "can1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_b";
+		function = "i2c2";
+	};
+
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
+		function = "msiof0";
+	};
+
+	scifa2_pins: scifa2 {
+		groups = "scifa2_data_c";
+		function = "scifa2";
+	};
+
+	scifb2_pins: scifb2 {
+		groups = "scifb2_data", "scifb2_ctrl";
+		function = "scifb2";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1_pwen";
+		function = "usb1";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi4>, <&src4>, <&dvc1>;
+			capture = <&ssi3>, <&src3>, <&dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scifa2 {
+	pinctrl-0 = <&scifa2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifb2 {
+	pinctrl-0 = <&scifb2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&tpu {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};