Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 234 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
new file mode 100644
index 000000000..d5e127851
--- /dev/null
+++ b/arch/arm/mach-omap1/time.c
@@ -0,0 +1,234 @@
+/*
+ * linux/arch/arm/mach-omap1/time.c
+ *
+ * OMAP Timers
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Partial timer rewrite and additional dynamic tick timer support by
+ * Tony Lindgen <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * MPU timer code based on the older MPU timer code for OMAP
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/sched_clock.h>
+
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include "hardware.h"
+#include "mux.h"
+#include "iomap.h"
+#include "common.h"
+#include "clock.h"
+
+#ifdef CONFIG_OMAP_MPU_TIMER
+
+#define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
+#define OMAP_MPU_TIMER_OFFSET		0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} omap_mpu_timer_regs_t;
+
+#define omap_mpu_timer_base(n)							\
+((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+				 (n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long notrace omap_mpu_timer_read(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+	return readl(&timer->read_tim);
+}
+
+static inline void omap_mpu_set_autoreset(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+
+	writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+
+	writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
+
+	if (autoreset)
+		timerflags |= MPU_TIMER_AR;
+
+	writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
+	udelay(1);
+	writel(load_val, &timer->load_tim);
+        udelay(1);
+	writel(timerflags, &timer->cntl);
+}
+
+static inline void omap_mpu_timer_stop(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+
+	writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 1 ... count down to zero, interrupt, reload
+ * ---------------------------------------------------------------------------
+ */
+static int omap_mpu_set_next_event(unsigned long cycles,
+				   struct clock_event_device *evt)
+{
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
+
+static int omap_mpu_set_oneshot(struct clock_event_device *evt)
+{
+	omap_mpu_timer_stop(0);
+	omap_mpu_remove_autoreset(0);
+	return 0;
+}
+
+static int omap_mpu_set_periodic(struct clock_event_device *evt)
+{
+	omap_mpu_set_autoreset(0);
+	return 0;
+}
+
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name			= "mpu_timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= omap_mpu_set_next_event,
+	.set_state_periodic	= omap_mpu_set_periodic,
+	.set_state_oneshot	= omap_mpu_set_oneshot,
+};
+
+static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static __init void omap_init_mpu_timer(unsigned long rate)
+{
+	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&clockevent_mpu_timer1, rate,
+					1, -1);
+}
+
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 2 ... free running 32-bit clock source and scheduler clock
+ * ---------------------------------------------------------------------------
+ */
+
+static u64 notrace omap_mpu_read_sched_clock(void)
+{
+	return ~omap_mpu_timer_read(1);
+}
+
+static void __init omap_init_clocksource(unsigned long rate)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
+	static char err[] __initdata = KERN_ERR
+			"%s: can't register clocksource!\n";
+
+	omap_mpu_timer_start(1, ~0, 1);
+	sched_clock_register(omap_mpu_read_sched_clock, 32, rate);
+
+	if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
+			300, 32, clocksource_mmio_readl_down))
+		printk(err, "mpu_timer2");
+}
+
+static void __init omap_mpu_timer_init(void)
+{
+	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
+	unsigned long	rate;
+
+	BUG_ON(IS_ERR(ck_ref));
+
+	rate = clk_get_rate(ck_ref);
+	clk_put(ck_ref);
+
+	/* PTV = 0 */
+	rate /= 2;
+
+	omap_init_mpu_timer(rate);
+	omap_init_clocksource(rate);
+}
+
+#else
+static inline void omap_mpu_timer_init(void)
+{
+	pr_err("Bogus timer, should not happen\n");
+}
+#endif	/* CONFIG_OMAP_MPU_TIMER */
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+void __init omap1_timer_init(void)
+{
+	omap1_clk_init();
+	omap1_mux_init();
+
+	if (omap_32k_timer_init() != 0)
+		omap_mpu_timer_init();
+}