summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/omap-mpuss-lowpower.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /arch/arm/mach-omap2/omap-mpuss-lowpower.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/mach-omap2/omap-mpuss-lowpower.c')
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c491
1 files changed, 491 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
new file mode 100644
index 000000000..9fba98c23
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP MPUSS low power code
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * OMAP4430 MPUSS mainly consists of dual Cortex-A9 with per-CPU
+ * Local timer and Watchdog, GIC, SCU, PL310 L2 cache controller,
+ * CPU0 and CPU1 LPRM modules.
+ * CPU0, CPU1 and MPUSS each have there own power domain and
+ * hence multiple low power combinations of MPUSS are possible.
+ *
+ * The CPU0 and CPU1 can't support Closed switch Retention (CSWR)
+ * because the mode is not supported by hw constraints of dormant
+ * mode. While waking up from the dormant mode, a reset signal
+ * to the Cortex-A9 processor must be asserted by the external
+ * power controller.
+ *
+ * With architectural inputs and hardware recommendations, only
+ * below modes are supported from power gain vs latency point of view.
+ *
+ * CPU0 CPU1 MPUSS
+ * ----------------------------------------------
+ * ON ON ON
+ * ON(Inactive) OFF ON(Inactive)
+ * OFF OFF CSWR
+ * OFF OFF OSWR
+ * OFF OFF OFF(Device OFF *TBD)
+ * ----------------------------------------------
+ *
+ * Note: CPU0 is the master core and it is the last CPU to go down
+ * and first to wake-up when MPUSS low power states are excercised
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <asm/virt.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "soc.h"
+#include "common.h"
+#include "omap44xx.h"
+#include "omap4-sar-layout.h"
+#include "pm.h"
+#include "prcm_mpu44xx.h"
+#include "prcm_mpu54xx.h"
+#include "prminst44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prm-regbits-44xx.h"
+
+static void __iomem *sar_base;
+static u32 old_cpu1_ns_pa_addr;
+
+#if defined(CONFIG_PM) && defined(CONFIG_SMP)
+
+struct omap4_cpu_pm_info {
+ struct powerdomain *pwrdm;
+ void __iomem *scu_sar_addr;
+ void __iomem *wkup_sar_addr;
+ void __iomem *l2x0_sar_addr;
+};
+
+/**
+ * struct cpu_pm_ops - CPU pm operations
+ * @finish_suspend: CPU suspend finisher function pointer
+ * @resume: CPU resume function pointer
+ * @scu_prepare: CPU Snoop Control program function pointer
+ * @hotplug_restart: CPU restart function pointer
+ *
+ * Structure holds functions pointer for CPU low power operations like
+ * suspend, resume and scu programming.
+ */
+struct cpu_pm_ops {
+ int (*finish_suspend)(unsigned long cpu_state);
+ void (*resume)(void);
+ void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state);
+ void (*hotplug_restart)(void);
+};
+
+static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
+static struct powerdomain *mpuss_pd;
+static u32 cpu_context_offset;
+
+static int default_finish_suspend(unsigned long cpu_state)
+{
+ omap_do_wfi();
+ return 0;
+}
+
+static void dummy_cpu_resume(void)
+{}
+
+static void dummy_scu_prepare(unsigned int cpu_id, unsigned int cpu_state)
+{}
+
+static struct cpu_pm_ops omap_pm_ops = {
+ .finish_suspend = default_finish_suspend,
+ .resume = dummy_cpu_resume,
+ .scu_prepare = dummy_scu_prepare,
+ .hotplug_restart = dummy_cpu_resume,
+};
+
+/*
+ * Program the wakeup routine address for the CPU0 and CPU1
+ * used for OFF or DORMANT wakeup.
+ */
+static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ if (pm_info->wkup_sar_addr)
+ writel_relaxed(addr, pm_info->wkup_sar_addr);
+}
+
+/*
+ * Store the SCU power status value to scratchpad memory
+ */
+static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+ u32 scu_pwr_st;
+
+ switch (cpu_state) {
+ case PWRDM_POWER_RET:
+ scu_pwr_st = SCU_PM_DORMANT;
+ break;
+ case PWRDM_POWER_OFF:
+ scu_pwr_st = SCU_PM_POWEROFF;
+ break;
+ case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
+ default:
+ scu_pwr_st = SCU_PM_NORMAL;
+ break;
+ }
+
+ if (pm_info->scu_sar_addr)
+ writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
+}
+
+/* Helper functions for MPUSS OSWR */
+static inline void mpuss_clear_prev_logic_pwrst(void)
+{
+ u32 reg;
+
+ reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+ omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+}
+
+static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
+{
+ u32 reg;
+
+ if (cpu_id) {
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
+ cpu_context_offset);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
+ cpu_context_offset);
+ } else {
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
+ cpu_context_offset);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
+ cpu_context_offset);
+ }
+}
+
+/*
+ * Store the CPU cluster state for L2X0 low power operations.
+ */
+static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ if (pm_info->l2x0_sar_addr)
+ writel_relaxed(save_state, pm_info->l2x0_sar_addr);
+}
+
+/*
+ * Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to
+ * in every restore MPUSS OFF path.
+ */
+#ifdef CONFIG_CACHE_L2X0
+static void __init save_l2x0_context(void)
+{
+ void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+ if (l2x0_base && sar_base) {
+ writel_relaxed(l2x0_saved_regs.aux_ctrl,
+ sar_base + L2X0_AUXCTRL_OFFSET);
+ writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+ sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+ }
+}
+#else
+static void __init save_l2x0_context(void)
+{}
+#endif
+
+/**
+ * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
+ * The purpose of this function is to manage low power programming
+ * of OMAP4 MPUSS subsystem
+ * @cpu : CPU ID
+ * @power_state: Low power state.
+ *
+ * MPUSS states for the context save:
+ * save_state =
+ * 0 - Nothing lost and no need to save: MPUSS INACTIVE
+ * 1 - CPUx L1 and logic lost: MPUSS CSWR
+ * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
+ * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
+ */
+int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
+ unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return -ENXIO;
+
+ switch (power_state) {
+ case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
+ save_state = 0;
+ break;
+ case PWRDM_POWER_OFF:
+ cpu_logic_state = PWRDM_POWER_OFF;
+ save_state = 1;
+ break;
+ case PWRDM_POWER_RET:
+ if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
+ save_state = 0;
+ break;
+ default:
+ /*
+ * CPUx CSWR is invalid hardware state. Also CPUx OSWR
+ * doesn't make much scense, since logic is lost and $L1
+ * needs to be cleaned because of coherency. This makes
+ * CPUx OSWR equivalent to CPUX OFF and hence not supported
+ */
+ WARN_ON(1);
+ return -ENXIO;
+ }
+
+ pwrdm_pre_transition(NULL);
+
+ /*
+ * Check MPUSS next state and save interrupt controller if needed.
+ * In MPUSS OSWR or device OFF, interrupt controller contest is lost.
+ */
+ mpuss_clear_prev_logic_pwrst();
+ if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
+ (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
+ save_state = 2;
+
+ cpu_clear_prev_logic_pwrst(cpu);
+ pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
+ pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state);
+ set_cpu_wakeup_addr(cpu, __pa_symbol(omap_pm_ops.resume));
+ omap_pm_ops.scu_prepare(cpu, power_state);
+ l2x0_pwrst_prepare(cpu, save_state);
+
+ /*
+ * Call low level function with targeted low power state.
+ */
+ if (save_state)
+ cpu_suspend(save_state, omap_pm_ops.finish_suspend);
+ else
+ omap_pm_ops.finish_suspend(save_state);
+
+ if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) && cpu)
+ gic_dist_enable();
+
+ /*
+ * Restore the CPUx power state to ON otherwise CPUx
+ * power domain can transitions to programmed low power
+ * state while doing WFI outside the low powe code. On
+ * secure devices, CPUx does WFI which can result in
+ * domain transition
+ */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ pwrdm_post_transition(NULL);
+
+ return 0;
+}
+
+/**
+ * omap4_hotplug_cpu: OMAP4 CPU hotplug entry
+ * @cpu : CPU ID
+ * @power_state: CPU low power state.
+ */
+int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
+ unsigned int cpu_state = 0;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return -ENXIO;
+
+ /* Use the achievable power state for the domain */
+ power_state = pwrdm_get_valid_lp_state(pm_info->pwrdm,
+ false, power_state);
+
+ if (power_state == PWRDM_POWER_OFF)
+ cpu_state = 1;
+
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
+ set_cpu_wakeup_addr(cpu, __pa_symbol(omap_pm_ops.hotplug_restart));
+ omap_pm_ops.scu_prepare(cpu, power_state);
+
+ /*
+ * CPU never retuns back if targeted power state is OFF mode.
+ * CPU ONLINE follows normal CPU ONLINE ptah via
+ * omap4_secondary_startup().
+ */
+ omap_pm_ops.finish_suspend(cpu_state);
+
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+ return 0;
+}
+
+
+/*
+ * Enable Mercury Fast HG retention mode by default.
+ */
+static void enable_mercury_retention_mode(void)
+{
+ u32 reg;
+
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST,
+ OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
+ /* Enable HG_EN, HG_RAMPUP = fast mode */
+ reg |= BIT(24) | BIT(25);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST,
+ OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
+}
+
+/*
+ * Initialise OMAP4 MPUSS
+ */
+int __init omap4_mpuss_init(void)
+{
+ struct omap4_cpu_pm_info *pm_info;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+ return -ENODEV;
+ }
+
+ /* Initilaise per CPU PM information */
+ pm_info = &per_cpu(omap4_pm_info, 0x0);
+ if (sar_base) {
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
+ if (cpu_is_omap44xx())
+ pm_info->wkup_sar_addr = sar_base +
+ CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ else
+ pm_info->wkup_sar_addr = sar_base +
+ OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ }
+ pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
+ if (!pm_info->pwrdm) {
+ pr_err("Lookup failed for CPU0 pwrdm\n");
+ return -ENODEV;
+ }
+
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ cpu_clear_prev_logic_pwrst(0);
+
+ /* Initialise CPU0 power domain state to ON */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ pm_info = &per_cpu(omap4_pm_info, 0x1);
+ if (sar_base) {
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
+ if (cpu_is_omap44xx())
+ pm_info->wkup_sar_addr = sar_base +
+ CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ else
+ pm_info->wkup_sar_addr = sar_base +
+ OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ }
+
+ pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
+ if (!pm_info->pwrdm) {
+ pr_err("Lookup failed for CPU1 pwrdm\n");
+ return -ENODEV;
+ }
+
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ cpu_clear_prev_logic_pwrst(1);
+
+ /* Initialise CPU1 power domain state to ON */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ mpuss_pd = pwrdm_lookup("mpu_pwrdm");
+ if (!mpuss_pd) {
+ pr_err("Failed to lookup MPUSS power domain\n");
+ return -ENODEV;
+ }
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
+ mpuss_clear_prev_logic_pwrst();
+
+ if (sar_base) {
+ /* Save device type on scratchpad for low level code to use */
+ writel_relaxed((omap_type() != OMAP2_DEVICE_TYPE_GP) ? 1 : 0,
+ sar_base + OMAP_TYPE_OFFSET);
+ save_l2x0_context();
+ }
+
+ if (cpu_is_omap44xx()) {
+ omap_pm_ops.finish_suspend = omap4_finish_suspend;
+ omap_pm_ops.resume = omap4_cpu_resume;
+ omap_pm_ops.scu_prepare = scu_pwrst_prepare;
+ omap_pm_ops.hotplug_restart = omap4_secondary_startup;
+ cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET;
+ } else if (soc_is_omap54xx() || soc_is_dra7xx()) {
+ cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET;
+ enable_mercury_retention_mode();
+ }
+
+ if (cpu_is_omap446x())
+ omap_pm_ops.hotplug_restart = omap4460_secondary_startup;
+
+ return 0;
+}
+
+#endif
+
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+ return old_cpu1_ns_pa_addr;
+}
+
+/*
+ * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
+ * current kernel's secondary_startup() early before
+ * clockdomains_init(). Otherwise clockdomain_init() can
+ * wake CPU1 and cause a hang.
+ */
+void __init omap4_mpuss_early_init(void)
+{
+ unsigned long startup_pa;
+ void __iomem *ns_pa_addr;
+
+ if (!(soc_is_omap44xx() || soc_is_omap54xx()))
+ return;
+
+ sar_base = omap4_get_sar_ram_base();
+
+ /* Save old NS_PA_ADDR for validity checks later on */
+ if (soc_is_omap44xx())
+ ns_pa_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ else
+ ns_pa_addr = sar_base + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ old_cpu1_ns_pa_addr = readl_relaxed(ns_pa_addr);
+
+ if (soc_is_omap443x())
+ startup_pa = __pa_symbol(omap4_secondary_startup);
+ else if (soc_is_omap446x())
+ startup_pa = __pa_symbol(omap4460_secondary_startup);
+ else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+ startup_pa = __pa_symbol(omap5_secondary_hyp_startup);
+ else
+ startup_pa = __pa_symbol(omap5_secondary_startup);
+
+ if (soc_is_omap44xx())
+ writel_relaxed(startup_pa, sar_base +
+ CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+ else
+ writel_relaxed(startup_pa, sar_base +
+ OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+}