Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

189 files changed, 32049 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
new file mode 100644
index 000000000..a64143574
--- /dev/null
+++ b/arch/arm/mach-s3c/Kconfig
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2009 Simtec Electronics
+
+source "arch/arm/mach-s3c/Kconfig.s3c24xx"
+source "arch/arm/mach-s3c/Kconfig.s3c64xx"
+
+config PLAT_SAMSUNG
+	bool
+	depends on PLAT_S3C24XX || ARCH_S3C64XX
+	default y
+	select GENERIC_IRQ_CHIP
+	select NO_IOPORT_MAP
+	select SOC_SAMSUNG
+	help
+	  Base platform code for all Samsung SoC based systems
+
+config SAMSUNG_PM
+	bool
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
+	default y
+	help
+	  Base platform power management code for samsung code
+
+if PLAT_SAMSUNG
+menu "Samsung Common options"
+
+# boot configurations
+
+comment "Boot options"
+
+config S3C_LOWLEVEL_UART_PORT
+	int "S3C UART to use for low-level messages"
+	depends on ARCH_S3C64XX
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+config SAMSUNG_ATAGS
+	def_bool n
+	depends on ATAGS
+	help
+	  This option enables ATAGS based boot support code for
+	  Samsung platforms, including static platform devices, legacy
+	  clock, timer and interrupt initialization, etc.
+
+	  Platforms that support only DT based boot need not to select
+	  this option.
+
+if SAMSUNG_ATAGS
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+	bool "ADC common driver support"
+	depends on !ARCH_MULTIPLATFORM
+	help
+	  Core support for the ADC block found in the Samsung SoC systems
+	  for drivers such as the touchscreen and hwmon to use to share
+	  this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_HSMMC3
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 3
+
+config S3C_DEV_HWMON
+	bool
+	help
+	  Compile in platform device definitions for HWMON
+
+config S3C_DEV_I2C1
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_I2C2
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 2
+
+config S3C_DEV_I2C3
+	bool
+	help
+	  Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+	bool
+	help
+	  Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+	bool
+	help
+	  Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+	bool
+	help
+	  Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+	bool
+	help
+	  Compile in platform device definition for I2C controller 7
+
+config S3C_DEV_FB
+	bool
+	help
+	  Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_WDT
+	bool
+	default y if ARCH_S3C24XX
+	help
+	  Compile in platform device definition for Watchdog Timer
+
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
+config S3C_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S3C_DEV_RTC
+	bool
+	help
+	  Compile in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+	bool
+	help
+	  Compile in platform device definition for ADC controller
+
+config SAMSUNG_DEV_IDE
+	bool
+	help
+	  Compile in platform device definitions for IDE
+
+config S3C64XX_DEV_SPI0
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controller 0
+
+config SAMSUNG_DEV_TS
+	bool
+	help
+	  Common in platform device definitions for touchscreen device
+
+config SAMSUNG_DEV_KEYPAD
+	bool
+	help
+	  Compile in platform device definitions for keypad
+
+config SAMSUNG_DEV_PWM
+	bool
+	default y if ARCH_S3C24XX
+	help
+	  Compile in platform device definition for PWM Timer
+
+config GPIO_SAMSUNG
+	def_bool y
+
+config SAMSUNG_PM_GPIO
+	bool
+	default y if GPIO_SAMSUNG && PM
+	help
+	  Include legacy GPIO power management code for platforms not using
+	  pinctrl-samsung driver.
+endif
+
+config SAMSUNG_WAKEMASK
+	bool
+	depends on PM
+	help
+	  Compile support for wakeup-mask controls found on the S3C6400
+	  and above. This code allows a set of interrupt to wakeup-mask
+	  mappings. See <plat/wakeup-mask.h>
+
+endmenu
+endif
diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
new file mode 100644
index 000000000..7287e173f
--- /dev/null
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -0,0 +1,604 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+menuconfig ARCH_S3C24XX
+	bool "Samsung S3C24XX SoCs (deprecated, see help)"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CLKSRC_SAMSUNG_PWM
+	select GPIO_SAMSUNG
+	select GPIOLIB
+	select S3C2410_WATCHDOG
+	select SAMSUNG_ATAGS
+	select WATCHDOG
+	help
+	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+	  Samsung SMDK2410 development board (and derivatives).
+
+	  The platform is deprecated and scheduled for removal. Please reach to
+	  the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
+	  you still use it.
+	  Without such feedback, the platform will be removed after 2022.
+
+if ARCH_S3C24XX
+
+config PLAT_S3C24XX
+	def_bool y
+	select GPIOLIB
+	select NO_IOPORT_MAP
+	select S3C_DEV_NAND
+	select COMMON_CLK
+	help
+	  Base platform code for any Samsung S3C24XX device
+
+menu "Samsung S3C24XX SoCs Support"
+
+comment "S3C24XX SoCs"
+
+config CPU_S3C2410
+	bool "Samsung S3C2410"
+	depends on ARCH_MULTI_V4T
+	default y
+	select CPU_ARM920T
+	select S3C2410_COMMON_CLK
+	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
+	select S3C2410_PM if PM
+	help
+	  Support for S3C2410 and S3C2410A family from the S3C24XX line
+	  of Samsung Mobile CPUs.
+
+config CPU_S3C2412
+	bool "Samsung S3C2412"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	select S3C2412_COMMON_CLK
+	select S3C2412_PM if PM_SLEEP
+	help
+	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2416
+	bool "Samsung S3C2416/S3C2450"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	select S3C2416_PM if PM_SLEEP
+	select S3C2443_COMMON_CLK
+	help
+	  Support for the S3C2416 SoC from the S3C24XX line
+
+config CPU_S3C2440
+	bool "Samsung S3C2440"
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+	select S3C2410_COMMON_CLK
+	select S3C2410_PM if PM_SLEEP
+	help
+	  Support for S3C2440 Samsung Mobile CPU based systems.
+
+config CPU_S3C2442
+	bool "Samsung S3C2442"
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+	select S3C2410_COMMON_CLK
+	select S3C2410_PM if PM_SLEEP
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	def_bool y
+	depends on CPU_S3C2440 || CPU_S3C2442
+
+config CPU_S3C2443
+	bool "Samsung S3C2443"
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+	select S3C2443_COMMON_CLK
+	help
+	  Support for the S3C2443 SoC from the S3C24XX line
+
+# common code
+
+config S3C24XX_SMDK
+	bool
+	help
+	  Common machine code for SMDK2410 and SMDK2440
+
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
+config S3C24XX_SIMTEC_PM
+	bool
+	help
+	  Common power management code for systems that are
+	  compatible with the Simtec style of power management
+
+config S3C24XX_SIMTEC_USB
+	bool
+	help
+	  USB management code for common Simtec S3C24XX boards
+
+config S3C24XX_SETUP_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung TouchScreen.
+
+config S3C2410_PM
+	bool
+	help
+	  Power Management code common to S3C2410 and better
+
+config S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
+# cpu-specific sections
+
+if CPU_S3C2410
+
+config S3C2410_PLL
+	bool
+	depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
+config S3C24XX_SIMTEC_NOR
+	bool
+	help
+	  Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+	bool
+	select HAVE_PATA_PLATFORM
+	help
+	  Internal node for machines with an BAST style IDE
+	  interface
+
+comment "S3C2410 Boards"
+
+#
+# The "S3C2410 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the American Microsystems M5900 Series
+	  <http://www.amltd.com>
+
+config ARCH_BAST
+	bool "Simtec Electronics BAST (EB2410ITX)"
+	select MACH_BAST_IDE
+	select S3C2410_COMMON_DCLK
+	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
+	select S3C24XX_SIMTEC_NOR
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_SIMTEC_USB
+	select S3C_DEV_HWMON
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Simtec Electronics EB2410ITX
+	  development board (also known as BAST)
+
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
+	help
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
+
+config ARCH_H1940
+	bool "IPAQ H1940"
+	select PM_H1940 if PM
+	select S3C24XX_SETUP_TS
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the HP IPAQ H1940
+
+config H1940BT
+	tristate "Control the state of H1940 bluetooth chip"
+	depends on ARCH_H1940
+	depends on RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on h1940.
+
+config MACH_N30
+	bool "Acer N30 family"
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you want suppt for the Acer N30, Acer N35,
+	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+
+config MACH_OTOM
+	bool "NexVision OTOM Board"
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_QT2410
+	bool "QT2410"
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Armzone QT2410
+
+config ARCH_SMDK2410
+	bool "SMDK2410/A9M2410"
+	select S3C24XX_SMDK
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
+	  <http://www.fsforth.de>
+
+config MACH_TCT_HAMMER
+	bool "TCT Hammer Board"
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the TinCanTools Hammer Board
+	  <https://www.tincantools.com>
+
+config MACH_VR1000
+	bool "Thorcom VR1000"
+	select MACH_BAST_IDE
+	select S3C2410_COMMON_DCLK
+	select S3C24XX_SIMTEC_NOR
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_SIMTEC_USB
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Thorcom VR1000 board.
+
+endif # CPU_S3C2410
+
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs such as S3C2416 with similar
+	  sleep procedure.
+
+if CPU_S3C2412
+
+config CPU_S3C2412_ONLY
+	bool
+	depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
+		   !CPU_S3C2442 && !CPU_S3C2443
+	default y
+
+config S3C2412_PM
+	bool
+	select S3C2412_PM_SLEEP
+	select SAMSUNG_WAKEMASK
+	help
+	  Internal config node to apply S3C2412 power management
+
+comment "S3C2412 Boards"
+
+#
+# The "S3C2412 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_JIVE
+	bool "Logitech Jive"
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+	bool "Allow access to bootloader partitions in MTD"
+	depends on MACH_JIVE
+
+config MACH_S3C2413
+	bool
+	help
+	  Internal node for S3C2413 version of SMDK2413, so that
+	  machine_is_s3c2413() will work when MACH_SMDK2413 is
+	  selected
+
+config MACH_SMDK2412
+	bool "SMDK2412"
+	select MACH_SMDK2413
+	help
+	  Say Y here if you are using an SMDK2412
+
+	  Note, this shares support with SMDK2413, so will automatically
+	  select MACH_SMDK2413.
+
+config MACH_SMDK2413
+	bool "SMDK2413"
+	select MACH_S3C2413
+	select S3C24XX_SMDK
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using an SMDK2413
+
+config MACH_VSTMS
+	bool "VMSTMS"
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using an VSTMS board
+
+endif # CPU_S3C2412
+
+if CPU_S3C2416
+
+config S3C2416_PM
+	bool
+	select S3C2412_PM_SLEEP
+	select SAMSUNG_WAKEMASK
+	help
+	  Internal config node to apply S3C2416 power management
+
+config S3C2416_SETUP_SDHCI
+	bool
+	select S3C2416_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+comment "S3C2416 Boards"
+
+config MACH_SMDK2416
+	bool "SMDK2416"
+	select S3C2416_SETUP_SDHCI
+	select S3C24XX_SMDK
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using an SMDK2416
+
+config MACH_S3C2416_DT
+	bool "Samsung S3C2416 machine using devicetree"
+	select TIMER_OF
+	select USE_OF
+	select PINCTRL
+	select PINCTRL_S3C24XX
+	help
+	  Machine support for Samsung S3C2416 machines with device tree enabled.
+	  Select this if a fdt blob is available for the S3C2416 SoC based board.
+	  Note: This is under development and not all peripherals can be supported
+	  with this machine file.
+
+endif # CPU_S3C2416
+
+if CPU_S3C2440 || CPU_S3C2442
+
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+endif # CPU_S3C2440 || CPU_S3C2442
+
+if CPU_S3C2440
+
+comment "S3C2440 Boards"
+
+#
+# The "S3C2440 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_ANUBIS
+	bool "Simtec Electronics ANUBIS"
+	select HAVE_PATA_PLATFORM
+	select S3C2410_COMMON_DCLK
+	select S3C2440_XTAL_12000000
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Simtec Electronics ANUBIS
+	  development system
+
+config MACH_AT2440EVB
+	bool "Avantech AT2440EVB development board"
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the AT2440EVB development board
+
+config MACH_MINI2440
+	bool "MINI2440 development board"
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	select LEDS_TRIGGER_BACKLIGHT
+	select NEW_LEDS
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+	  available via various sources. It can come with a 3.5" or 7" touch LCD.
+
+config MACH_NEXCODER_2440
+	bool "NexVision NEXCODER 2440 Light Board"
+	select S3C2440_XTAL_12000000
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config MACH_OSIRIS
+	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_COMMON_DCLK
+	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
+	select S3C2440_XTAL_12000000
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Simtec IM2440D20 module, also
+	  known as the Osiris.
+
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	depends on TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
+config MACH_RX3715
+	bool "HP iPAQ rx3715"
+	select PM_H1940 if PM
+	select S3C2440_XTAL_16934400
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+	bool "SMDK2440"
+	select S3C2440_XTAL_16934400
+	select S3C24XX_SMDK
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the SMDK2440.
+
+config SMDK2440_CPU2440
+	bool "SMDK2440 with S3C2440 CPU module"
+	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
+
+endif # CPU_S3C2440
+
+if CPU_S3C2442
+
+comment "S3C2442 Boards"
+
+#
+# The "S3C2442 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select I2C
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select POWER_SUPPLY
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+config MACH_RX1950
+	bool "HP iPAQ rx1950"
+	select I2C
+	select PM_H1940 if PM
+	select S3C2410_COMMON_DCLK
+	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
+	select S3C2440_XTAL_16934400
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you're using HP iPAQ rx1950
+
+endif # CPU_S3C2442
+
+if CPU_S3C2443 || CPU_S3C2416
+
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
+endif # CPU_S3C2443 || CPU_S3C2416
+
+if CPU_S3C2443
+
+comment "S3C2443 Boards"
+
+config MACH_SMDK2443
+	bool "SMDK2443"
+	select S3C24XX_SMDK
+	select S3C_DEV_HSMMC1
+	help
+	  Say Y here if you are using an SMDK2443
+
+endif # CPU_S3C2443
+
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
+
+endmenu # "Samsung S3C24XX SoCs Support"
+
+endif # ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
new file mode 100644
index 000000000..0c1b91c3a
--- /dev/null
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+
+menuconfig ARCH_S3C64XX
+	bool "Samsung S3C64XX (deprecated, see help)"
+	depends on ARCH_MULTI_V6
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK_SAMSUNG
+	select GPIO_SAMSUNG if ATAGS
+	select GPIOLIB
+	select HAVE_TCM
+	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS if PM
+	select S3C_DEV_NAND if ATAGS
+	select S3C_GPIO_TRACK if ATAGS
+	select S3C2410_WATCHDOG
+	select SAMSUNG_ATAGS if ATAGS
+	select SAMSUNG_WAKEMASK if PM
+	select WATCHDOG
+	help
+	  Samsung S3C64XX series based systems
+
+	  The platform is deprecated and scheduled for removal. Please reach to
+	  the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
+	  you still use it.
+	  Without such feedback, the platform will be removed after 2024.
+
+if ARCH_S3C64XX
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
+config CPU_S3C6410
+	bool
+	help
+	  Enable S3C6410 CPU support
+
+config S3C64XX_PL080
+	def_bool DMADEVICES
+	select AMBA_PL08X
+
+config S3C64XX_SETUP_SDHCI
+	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
+	help
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+config S3C64XX_DEV_ONENAND1
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
+
+config SAMSUNG_DEV_BACKLIGHT
+	bool
+	depends on SAMSUNG_DEV_PWM
+	help
+	  Compile in platform device definition LCD backlight with PWM Timer
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_IDE
+	bool
+	help
+	  Common setup code for S3C64XX IDE.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for S3C64XX KEYPAD GPIO configurations
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+config S3C64XX_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
+config S3C64XX_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+	bool "SMDK6400"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6400
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_HSMMC1
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+	bool "A&W6410"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	help
+	  Machine support for the A&W6410
+
+config MACH_MINI6410
+	bool "MINI6410"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the FriendlyARM MINI6410
+
+config MACH_REAL6410
+	bool "REAL6410"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the CoreWind REAL6410
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+	  Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+	  Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	depends on I2C=y
+	select MFD_WM8350_I2C
+	select REGULATOR
+	select REGULATOR_WM8350
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	depends on I2C=y
+	select MFD_WM831X
+	select MFD_WM831X_I2C
+	select REGULATOR
+	select REGULATOR_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6410
+	select S3C64XX_SETUP_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	help
+	  Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select SAMSUNG_DEV_PWM
+	help
+	  Machine support for the Airgoo HMT
+
+config MACH_SMARTQ
+	bool
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HWMON
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
+	help
+	  Shared machine support for SmartQ 5/7
+
+config MACH_SMARTQ5
+	bool "SmartQ 5"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select MACH_SMARTQ
+	help
+	  Machine support for the SmartQ 5
+
+config MACH_SMARTQ7
+	bool "SmartQ 7"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select MACH_SMARTQ
+	help
+	  Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+	bool "Wolfson Cragganmore 6410"
+	depends on ATAGS
+	depends on I2C=y
+	select CPU_S3C6410
+	select LEDS_GPIO_REGISTER
+	select S3C64XX_DEV_SPI0
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_SPI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	help
+	  Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+	select CPU_S3C6400
+	select CPU_S3C6410
+	select PINCTRL
+	select PINCTRL_S3C64XX
+	help
+	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+	  enabled.
+	  Select this if a fdt blob is available for your S3C64XX SoC based
+	  board.
+	  Note: This is under development and not all peripherals can be
+	  supported with this machine file.
+
+endif
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
new file mode 100644
index 000000000..7c7d3318f
--- /dev/null
+++ b/arch/arm/mach-s3c/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2009 Simtec Electronics
+
+ifdef CONFIG_ARCH_S3C24XX
+include $(src)/Makefile.s3c24xx
+endif
+
+ifdef CONFIG_ARCH_S3C64XX
+include $(src)/Makefile.s3c64xx
+endif
+
+# Objects we always build independent of SoC choice
+
+obj-y				+= init.o cpu.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC)	+= adc.o
+
+# devices
+
+obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
+
+obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
+obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
+
+obj-$(CONFIG_GPIO_SAMSUNG)     += gpio-samsung.o
+
+# PM support
+
+obj-$(CONFIG_SAMSUNG_PM)	+= pm.o pm-common.o
+obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
+
+obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c24xx b/arch/arm/mach-s3c/Makefile.s3c24xx
new file mode 100644
index 000000000..3483ab3a2
--- /dev/null
+++ b/arch/arm/mach-s3c/Makefile.s3c24xx
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+
+# core
+
+obj-y				+= s3c24xx.o
+obj-y				+= irq-s3c24xx.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ)	+= irq-s3c24xx-fiq.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ)	+= irq-s3c24xx-fiq-exports.o
+
+obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
+obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
+obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
+
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
+obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
+
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
+obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
+
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
+
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm-s3c24xx.o
+obj-$(CONFIG_PM_SLEEP)		+= irq-pm-s3c24xx.o sleep-s3c24xx.o
+
+# common code
+
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o
+
+obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
+
+#
+# machine support
+# following is ordered alphabetically by option text.
+#
+
+obj-$(CONFIG_MACH_AML_M5900)		+= mach-amlm5900.o
+obj-$(CONFIG_ARCH_BAST)			+= mach-bast.o
+obj-$(CONFIG_BAST_PC104_IRQ)		+= bast-irq.o
+obj-$(CONFIG_ARCH_H1940)		+= mach-h1940.o
+obj-$(CONFIG_H1940BT)			+= h1940-bluetooth.o
+obj-$(CONFIG_PM_H1940)			+= pm-h1940.o
+obj-$(CONFIG_MACH_N30)			+= mach-n30.o
+obj-$(CONFIG_MACH_OTOM)			+= mach-otom.o
+obj-$(CONFIG_MACH_QT2410)		+= mach-qt2410.o
+obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
+obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
+obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o
+
+obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
+obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
+
+obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
+obj-$(CONFIG_MACH_S3C2416_DT)		+= mach-s3c2416-dt.o
+
+obj-$(CONFIG_MACH_ANUBIS)		+= mach-anubis.o
+obj-$(CONFIG_MACH_AT2440EVB)		+= mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440)		+= mach-mini2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440)	+= mach-nexcoder.o
+obj-$(CONFIG_MACH_OSIRIS)		+= mach-osiris.o
+obj-$(CONFIG_MACH_RX3715)		+= mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
+
+obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
+obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
+
+obj-$(CONFIG_MACH_SMDK2443)		+= mach-smdk2443.o
+
+# common bits of machine support
+
+obj-$(CONFIG_S3C24XX_SMDK)		+= common-smdk-s3c24xx.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
+obj-$(CONFIG_S3C24XX_SIMTEC_NOR)	+= simtec-nor.o
+obj-$(CONFIG_S3C24XX_SIMTEC_PM)		+= simtec-pm.o
+obj-$(CONFIG_S3C24XX_SIMTEC_USB)	+= simtec-usb.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
+obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
+
+# device setup
+
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c24xx.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi-s3c24xx.o
+obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c-s3c24xx.o
+obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts-s3c24xx.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
new file mode 100644
index 000000000..21e919bf2
--- /dev/null
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm-s3c64xx.o
+obj-$(CONFIG_PM_SLEEP)		+= sleep-s3c64xx.o
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle-s3c64xx.o
+
+ifdef CONFIG_SAMSUNG_ATAGS
+
+obj-$(CONFIG_PM_SLEEP)          += irq-pm-s3c64xx.o
+
+# Core
+
+obj-y				+= s3c64xx.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
+
+# Device support
+
+obj-y				+= dev-uart-s3c64xx.o
+obj-y				+= dev-audio-s3c64xx.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
+
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight-s3c64xx.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
+obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
+obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+endif
+
+obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c/adc-core.h b/arch/arm/mach-s3c/adc-core.h
new file mode 100644
index 000000000..039f6862b
--- /dev/null
+++ b/arch/arm/mach-s3c/adc-core.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ */
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
+	s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/mach-s3c/adc.c b/arch/arm/mach-s3c/adc.c
new file mode 100644
index 000000000..0232520d3
--- /dev/null
+++ b/arch/arm/mach-s3c/adc.c
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-1.0+
+//
+// Copyright (c) 2008 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+//
+// Samsung ADC device core
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+
+#include "regs-adc.h"
+#include <linux/soc/samsung/s3c-adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+enum s3c_cpu_type {
+	TYPE_ADCV1, /* S3C24XX */
+	TYPE_ADCV11, /* S3C2443 */
+	TYPE_ADCV12, /* S3C2416, S3C2450 */
+	TYPE_ADCV2, /* S3C64XX */
+	TYPE_ADCV3, /* S5PV210, S5PC110, Exynos4210 */
+};
+
+struct s3c_adc_client {
+	struct platform_device	*pdev;
+	struct list_head	 pend;
+	wait_queue_head_t	*wait;
+
+	unsigned int		 nr_samples;
+	int			 result;
+	unsigned char		 is_ts;
+	unsigned char		 channel;
+
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
+			      unsigned *samples_left);
+};
+
+struct adc_device {
+	struct platform_device	*pdev;
+	struct platform_device	*owner;
+	struct clk		*clk;
+	struct s3c_adc_client	*cur;
+	struct s3c_adc_client	*ts_pend;
+	void __iomem		*regs;
+	spinlock_t		 lock;
+
+	unsigned int		 prescale;
+
+	int			 irq;
+	struct regulator	*vdd;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+	con |= S3C2410_ADCCON_ENABLE_START;
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+				  struct s3c_adc_client *client)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+
+	client->select_cb(client, 1);
+
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+		con &= ~S3C2410_ADCCON_MUXMASK;
+	con &= ~S3C2410_ADCCON_STDBM;
+	con &= ~S3C2410_ADCCON_STARTMASK;
+
+	if (!client->is_ts) {
+		if (cpu == TYPE_ADCV3)
+			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
+			writel(client->channel & 0xf,
+						adc->regs + S3C2443_ADCMUX);
+		else
+			con |= S3C2410_ADCCON_SELMUX(client->channel);
+	}
+
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+		readl(adc->regs + S3C2410_ADCCON),
+		readl(adc->regs + S3C2410_ADCTSC),
+		readl(adc->regs + S3C2410_ADCDLY));
+}
+
+static void s3c_adc_try(struct adc_device *adc)
+{
+	struct s3c_adc_client *next = adc->ts_pend;
+
+	if (!next && !list_empty(&adc_pending)) {
+		next = list_first_entry(&adc_pending,
+					struct s3c_adc_client, pend);
+		list_del(&next->pend);
+	} else
+		adc->ts_pend = NULL;
+
+	if (next) {
+		adc_dbg(adc, "new client is %p\n", next);
+		adc->cur = next;
+		s3c_adc_select(adc, next);
+		s3c_adc_convert(adc);
+		s3c_adc_dbgshow(adc);
+	}
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+		  unsigned int channel, unsigned int nr_samples)
+{
+	struct adc_device *adc = adc_dev;
+	unsigned long flags;
+
+	if (!adc) {
+		printk(KERN_ERR "%s: failed to find adc\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	if (client->is_ts && adc->ts_pend) {
+		spin_unlock_irqrestore(&adc->lock, flags);
+		return -EAGAIN;
+	}
+
+	client->channel = channel;
+	client->nr_samples = nr_samples;
+
+	if (client->is_ts)
+		adc->ts_pend = client;
+	else
+		list_add_tail(&client->pend, &adc_pending);
+
+	if (!adc->cur)
+		s3c_adc_try(adc);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_read);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
+						     unsigned *samples_left),
+					unsigned int is_ts)
+{
+	struct s3c_adc_client *client;
+
+	WARN_ON(!pdev);
+
+	if (!select)
+		select = s3c_adc_default_select;
+
+	if (!pdev)
+		return ERR_PTR(-EINVAL);
+
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	if (!client)
+		return ERR_PTR(-ENOMEM);
+
+	client->pdev = pdev;
+	client->is_ts = is_ts;
+	client->select_cb = select;
+	client->convert_cb = conv;
+
+	return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&adc_dev->lock, flags);
+
+	/* We should really check that nothing is in progress. */
+	if (adc_dev->cur == client)
+		adc_dev->cur = NULL;
+	if (adc_dev->ts_pend == client)
+		adc_dev->ts_pend = NULL;
+	else {
+		struct list_head *p, *n;
+		struct s3c_adc_client *tmp;
+
+		list_for_each_safe(p, n, &adc_pending) {
+			tmp = list_entry(p, struct s3c_adc_client, pend);
+			if (tmp == client)
+				list_del(&tmp->pend);
+		}
+	}
+
+	if (adc_dev->cur == NULL)
+		s3c_adc_try(adc_dev);
+
+	spin_unlock_irqrestore(&adc_dev->lock, flags);
+	kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+	struct adc_device *adc = pw;
+	struct s3c_adc_client *client = adc->cur;
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+	unsigned data0, data1;
+
+	if (!client) {
+		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+		goto exit;
+	}
+
+	data0 = readl(adc->regs + S3C2410_ADCDAT0);
+	data1 = readl(adc->regs + S3C2410_ADCDAT1);
+	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+	client->nr_samples--;
+
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
+		data0 &= 0x3ff;
+		data1 &= 0x3ff;
+	} else {
+		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
+	}
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0, data1, &client->nr_samples);
+
+	if (client->nr_samples > 0) {
+		/* fire another conversion for this */
+
+		client->select_cb(client, 1);
+		s3c_adc_convert(adc);
+	} else {
+		spin_lock(&adc->lock);
+		(client->select_cb)(client, 0);
+		adc->cur = NULL;
+
+		s3c_adc_try(adc);
+		spin_unlock(&adc->lock);
+	}
+
+exit:
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
+		/* Clear ADC interrupt */
+		writel(0, adc->regs + S3C64XX_ADCCLRINT);
+	}
+	return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_device *adc;
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
+	int ret;
+	unsigned tmp;
+
+	adc = devm_kzalloc(dev, sizeof(*adc), GFP_KERNEL);
+	if (!adc)
+		return -ENOMEM;
+
+	spin_lock_init(&adc->lock);
+
+	adc->pdev = pdev;
+	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+	adc->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(adc->vdd)) {
+		dev_err(dev, "operating without regulator \"vdd\" .\n");
+		return PTR_ERR(adc->vdd);
+	}
+
+	adc->irq = platform_get_irq(pdev, 1);
+	if (adc->irq <= 0)
+		return -ENOENT;
+
+	ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
+				adc);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach adc irq\n");
+		return ret;
+	}
+
+	adc->clk = devm_clk_get(dev, "adc");
+	if (IS_ERR(adc->clk)) {
+		dev_err(dev, "failed to get adc clock\n");
+		return PTR_ERR(adc->clk);
+	}
+
+	adc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(adc->regs))
+		return PTR_ERR(adc->regs);
+
+	ret = regulator_enable(adc->vdd);
+	if (ret)
+		return ret;
+
+	clk_prepare_enable(adc->clk);
+
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
+		tmp |= S3C64XX_ADCCON_RESSEL;
+
+	writel(tmp, adc->regs + S3C2410_ADCCON);
+
+	dev_info(dev, "attached adc driver\n");
+
+	platform_set_drvdata(pdev, adc);
+	adc_dev = adc;
+
+	return 0;
+}
+
+static int s3c_adc_remove(struct platform_device *pdev)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(adc->clk);
+	regulator_disable(adc->vdd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct device *dev)
+{
+	struct adc_device *adc = dev_get_drvdata(dev);
+	unsigned long flags;
+	u32 con;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	con = readl(adc->regs + S3C2410_ADCCON);
+	con |= S3C2410_ADCCON_STDBM;
+	writel(con, adc->regs + S3C2410_ADCCON);
+
+	disable_irq(adc->irq);
+	spin_unlock_irqrestore(&adc->lock, flags);
+	clk_disable(adc->clk);
+	regulator_disable(adc->vdd);
+
+	return 0;
+}
+
+static int s3c_adc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct adc_device *adc = platform_get_drvdata(pdev);
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
+	int ret;
+	unsigned long tmp;
+
+	ret = regulator_enable(adc->vdd);
+	if (ret)
+		return ret;
+	clk_enable(adc->clk);
+	enable_irq(adc->irq);
+
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
+		tmp |= S3C64XX_ADCCON_RESSEL;
+
+	writel(tmp, adc->regs + S3C2410_ADCCON);
+
+	return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static const struct platform_device_id s3c_adc_driver_ids[] = {
+	{
+		.name           = "s3c24xx-adc",
+		.driver_data    = TYPE_ADCV1,
+	}, {
+		.name		= "s3c2443-adc",
+		.driver_data	= TYPE_ADCV11,
+	}, {
+		.name		= "s3c2416-adc",
+		.driver_data	= TYPE_ADCV12,
+	}, {
+		.name           = "s3c64xx-adc",
+		.driver_data    = TYPE_ADCV2,
+	}, {
+		.name		= "samsung-adc-v3",
+		.driver_data	= TYPE_ADCV3,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
+static const struct dev_pm_ops adc_pm_ops = {
+	.suspend	= s3c_adc_suspend,
+	.resume		= s3c_adc_resume,
+};
+
+static struct platform_driver s3c_adc_driver = {
+	.id_table	= s3c_adc_driver_ids,
+	.driver		= {
+		.name	= "s3c-adc",
+		.pm	= &adc_pm_ops,
+	},
+	.probe		= s3c_adc_probe,
+	.remove		= s3c_adc_remove,
+};
+
+static int __init adc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&s3c_adc_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+	return ret;
+}
+
+module_init(adc_init);
diff --git a/arch/arm/mach-s3c/anubis.h b/arch/arm/mach-s3c/anubis.h
new file mode 100644
index 000000000..13847292e
--- /dev/null
+++ b/arch/arm/mach-s3c/anubis.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL		(0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK		(0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0			IRQ_EINT2
+#define ANUBIS_IRQ_IDE1			IRQ_EINT3
+#define ANUBIS_IRQ_ASIX			IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)		(S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD			(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1			ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1			ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG			ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG			(ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI			ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX		ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC			ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX		ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c/ata-core-s3c64xx.h b/arch/arm/mach-s3c/ata-core-s3c64xx.h
new file mode 100644
index 000000000..4863ad9d3
--- /dev/null
+++ b/arch/arm/mach-s3c/ata-core-s3c64xx.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ */
+
+#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
+#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+	s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/backlight-s3c64xx.h b/arch/arm/mach-s3c/backlight-s3c64xx.h
new file mode 100644
index 000000000..2a2b35821
--- /dev/null
+++ b/arch/arm/mach-s3c/backlight-s3c64xx.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ */
+
+#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
+#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
+
+/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
+ * @no:		GPIO number for PWM timer out
+ * @func:	Special function of GPIO line for PWM timer
+ */
+struct samsung_bl_gpio_info {
+	int no;
+	int func;
+};
+
+extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+	struct platform_pwm_backlight_data *bl_data);
+
+#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
new file mode 100644
index 000000000..67f0adc1f
--- /dev/null
+++ b/arch/arm/mach-s3c/bast-ide.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2007 Simtec Electronics
+//	http://www.simtec.co.uk/products/EB2410ITX/
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+#include "irqs.h"
+
+#include "bast.h"
+
+/* IDE ports */
+
+static struct pata_platform_info bast_ide_platdata = {
+	.ioport_shift	= 5,
+};
+
+static struct resource bast_ide0_resource[] = {
+	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
+};
+
+static struct platform_device bast_device_ide0 = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(bast_ide0_resource),
+	.resource	= bast_ide0_resource,
+	.dev		= {
+		.platform_data = &bast_ide_platdata,
+		.coherent_dma_mask = ~0,
+	}
+
+};
+
+static struct resource bast_ide1_resource[] = {
+	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
+};
+
+static struct platform_device bast_device_ide1 = {
+	.name		= "pata_platform",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(bast_ide1_resource),
+	.resource	= bast_ide1_resource,
+	.dev		= {
+		.platform_data = &bast_ide_platdata,
+		.coherent_dma_mask = ~0,
+	}
+};
+
+static struct platform_device *bast_ide_devices[] __initdata = {
+	&bast_device_ide0,
+	&bast_device_ide1,
+};
+
+static __init int bast_ide_init(void)
+{
+	if (machine_is_bast() || machine_is_vr1000())
+		return platform_add_devices(bast_ide_devices,
+					    ARRAY_SIZE(bast_ide_devices));
+
+	return 0;
+}
+
+fs_initcall(bast_ide_init);
diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
new file mode 100644
index 000000000..cfc2ddc65
--- /dev/null
+++ b/arch/arm/mach-s3c/bast-irq.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2003-2005 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+
+#include "regs-irq.h"
+#include "irqs.h"
+
+#include "bast.h"
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+/* handle PC104 ISA interrupts from the system CPLD */
+
+/* table of ISA irq nos to the relevant mask... zero means
+ * the irq is not implemented
+*/
+static const unsigned char bast_pc104_irqmasks[] = {
+	0,   /* 0 */
+	0,   /* 1 */
+	0,   /* 2 */
+	1,   /* 3 */
+	0,   /* 4 */
+	2,   /* 5 */
+	0,   /* 6 */
+	4,   /* 7 */
+	0,   /* 8 */
+	0,   /* 9 */
+	8,   /* 10 */
+	0,   /* 11 */
+	0,   /* 12 */
+	0,   /* 13 */
+	0,   /* 14 */
+	0,   /* 15 */
+};
+
+static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
+
+static void
+bast_pc104_mask(struct irq_data *data)
+{
+	unsigned long temp;
+
+	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
+	temp &= ~bast_pc104_irqmasks[data->irq];
+	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
+}
+
+static void
+bast_pc104_maskack(struct irq_data *data)
+{
+	struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
+
+	bast_pc104_mask(data);
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+}
+
+static void
+bast_pc104_unmask(struct irq_data *data)
+{
+	unsigned long temp;
+
+	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
+	temp |= bast_pc104_irqmasks[data->irq];
+	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
+}
+
+static struct irq_chip  bast_pc104_chip = {
+	.irq_mask	= bast_pc104_mask,
+	.irq_unmask	= bast_pc104_unmask,
+	.irq_ack	= bast_pc104_maskack
+};
+
+static void bast_irq_pc104_demux(struct irq_desc *desc)
+{
+	unsigned int stat;
+	unsigned int irqno;
+	int i;
+
+	stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
+
+	if (unlikely(stat == 0)) {
+		/* ack if we get an irq with nothing (ie, startup) */
+		desc->irq_data.chip->irq_ack(&desc->irq_data);
+	} else {
+		/* handle the IRQ */
+
+		for (i = 0; stat != 0; i++, stat >>= 1) {
+			if (stat & 1) {
+				irqno = bast_pc104_irqs[i];
+				generic_handle_irq(irqno);
+			}
+		}
+	}
+}
+
+static __init int bast_irq_init(void)
+{
+	unsigned int i;
+
+	if (machine_is_bast()) {
+		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
+
+		/* zap all the IRQs */
+
+		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
+
+		irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
+
+		/* register our IRQs */
+
+		for (i = 0; i < 4; i++) {
+			unsigned int irqno = bast_pc104_irqs[i];
+
+			irq_set_chip_and_handler(irqno, &bast_pc104_chip,
+						 handle_level_irq);
+			irq_clear_status_flags(irqno, IRQ_NOREQUEST);
+		}
+	}
+
+	return 0;
+}
+
+arch_initcall(bast_irq_init);
diff --git a/arch/arm/mach-s3c/bast.h b/arch/arm/mach-s3c/bast.h
new file mode 100644
index 000000000..a7726f93f
--- /dev/null
+++ b/arch/arm/mach-s3c/bast.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF		(0x00)
+#define BAST_CPLD_CTRL1_LRCADC		(0x01)
+#define BAST_CPLD_CTRL1_LRCDAC		(0x02)
+#define BAST_CPLD_CTRL1_LRCARM		(0x03)
+#define BAST_CPLD_CTRL1_LRMASK		(0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND		(0x04)
+#define BAST_CPLD_CTLR2_IDERST		(0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK		(0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN		(0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT		(0x01)
+#define BAST_CPLD_CTRL4_LCDRW		(0x02)
+#define BAST_CPLD_CTRL4_LCDCMD		(0x04)
+#define BAST_CPLD_CTRL4_LCDE2		(0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE		(0)
+#define BAST_CPLD_DMA0_SECIDE		(1)
+#define BAST_CPLD_DMA0_ISA15		(2)
+#define BAST_CPLD_DMA0_ISA36		(3)
+
+#define BAST_CPLD_DMA1_PRIIDE		(0 << 2)
+#define BAST_CPLD_DMA1_SECIDE		(1 << 2)
+#define BAST_CPLD_DMA1_ISA15		(2 << 2)
+#define BAST_CPLD_DMA1_ISA36		(3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC			IRQ_EINT18
+#define BAST_IRQ_IDE0			IRQ_EINT16
+#define BAST_IRQ_IDE1			IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1		IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2		IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL		IRQ_EINT13
+#define BAST_IRQ_ASIX			IRQ_EINT11
+#define BAST_IRQ_DM9000			IRQ_EINT10
+#define BAST_IRQ_ISA			IRQ_EINT9
+#define BAST_IRQ_SMALERT		IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x)			(S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1			BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2			BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3			BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4			BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ		BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW		BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK		BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1		(0x8800000)
+#define BAST_VA_LCD_RCMD1		BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1		(0x8000000)
+#define BAST_VA_LCD_WCMD1		BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1		(0x9800000)
+#define BAST_VA_LCD_RDATA1		BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1		(0x9000000)
+#define BAST_VA_LCD_WDATA1		BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2		(0xA800000)
+#define BAST_VA_LCD_RCMD2		BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2		(0xA000000)
+#define BAST_VA_LCD_WCMD2		BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2		(0xB800000)
+#define BAST_VA_LCD_RDATA2		BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2		(0xB000000)
+#define BAST_VA_LCD_WDATA2		BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE		(0xE0000000)
+
+#define BAST_VA_ISAIO			(BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM			(BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI			(BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX		(BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC			(BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX		(BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET			(BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000			(BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO			(BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2			(0x00000000)
+#define BAST_VAM_CS3			(0x04000000)
+#define BAST_VAM_CS4			(0x08000000)
+#define BAST_VAM_CS5			(0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO			(0x00000000)
+#define BAST_PA_ASIXNET			(0x01000000)
+#define BAST_PA_SUPERIO			(0x01800000)
+#define BAST_PA_IDEPRI			(0x02000000)
+#define BAST_PA_IDEPRIAUX		(0x02800000)
+#define BAST_PA_IDESEC			(0x03000000)
+#define BAST_PA_IDESECAUX		(0x03800000)
+#define BAST_PA_ISAMEM			(0x04000000)
+#define BAST_PA_DM9000			(0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO			(BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS			BAST_VAM_CS5
+#define BAST_DM9000_CS			BAST_VAM_CS4
+
+#define BAST_IDE_CS	S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
new file mode 100644
index 000000000..6d124bbd3
--- /dev/null
+++ b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Common code for SMDK2410 and SMDK2440 boards
+//
+// http://www.fluff.org/ben/smdk2440/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "pm.h"
+
+#include "common-smdk-s3c24xx.h"
+
+/* LED devices */
+
+static struct gpiod_lookup_table smdk_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led5_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led6_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led7_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led4 = {
+	.name		= "led4",
+	.def_trigger	= "timer",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led5 = {
+	.name		= "led5",
+	.def_trigger	= "nand-disk",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led6 = {
+	.name		= "led6",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led7 = {
+	.name		= "led7",
+};
+
+static struct platform_device smdk_led4 = {
+	.name		= "s3c24xx_led",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &smdk_pdata_led4,
+	},
+};
+
+static struct platform_device smdk_led5 = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &smdk_pdata_led5,
+	},
+};
+
+static struct platform_device smdk_led6 = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data = &smdk_pdata_led6,
+	},
+};
+
+static struct platform_device smdk_led7 = {
+	.name		= "s3c24xx_led",
+	.id		= 3,
+	.dev		= {
+		.platform_data = &smdk_pdata_led7,
+	},
+};
+
+/* NAND parititon from 2.4.18-swl5 */
+
+static struct mtd_partition smdk_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "S3C2410 flash partition 1",
+		.offset = 0,
+		.size	= SZ_2M,
+	},
+	[2] = {
+		.name	= "S3C2410 flash partition 2",
+		.offset = SZ_4M,
+		.size	= SZ_4M,
+	},
+	[3] = {
+		.name	= "S3C2410 flash partition 3",
+		.offset	= SZ_8M,
+		.size	= SZ_2M,
+	},
+	[4] = {
+		.name	= "S3C2410 flash partition 4",
+		.offset = SZ_1M * 10,
+		.size	= SZ_4M,
+	},
+	[5] = {
+		.name	= "S3C2410 flash partition 5",
+		.offset	= SZ_1M * 14,
+		.size	= SZ_1M * 10,
+	},
+	[6] = {
+		.name	= "S3C2410 flash partition 6",
+		.offset	= SZ_1M * 24,
+		.size	= SZ_1M * 24,
+	},
+	[7] = {
+		.name	= "S3C2410 flash partition 7",
+		.offset = SZ_1M * 48,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct s3c2410_nand_set smdk_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
+		.partitions	= smdk_default_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand smdk_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
+	.sets		= smdk_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* devices we initialise */
+
+static struct platform_device __initdata *smdk_devs[] = {
+	&s3c_device_nand,
+	&smdk_led4,
+	&smdk_led5,
+	&smdk_led6,
+	&smdk_led7,
+};
+
+void __init smdk_machine_init(void)
+{
+	if (machine_is_smdk2443())
+		smdk_nand_info.twrph0 = 50;
+
+	s3c_nand_set_platdata(&smdk_nand_info);
+
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&smdk_led4_gpio_table);
+	gpiod_add_lookup_table(&smdk_led5_gpio_table);
+	gpiod_add_lookup_table(&smdk_led6_gpio_table);
+	gpiod_add_lookup_table(&smdk_led7_gpio_table);
+
+	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
+
+	s3c_pm_init();
+}
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
new file mode 100644
index 000000000..c0352b06e
--- /dev/null
+++ b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ */
+
+extern void smdk_machine_init(void);
diff --git a/arch/arm/mach-s3c/cpu.c b/arch/arm/mach-s3c/cpu.c
new file mode 100644
index 000000000..3491f790d
--- /dev/null
+++ b/arch/arm/mach-s3c/cpu.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Samsung CPU Support
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include "map-base.h"
+#include "cpu.h"
+
+unsigned long samsung_cpu_id;
+
+void __init s3c64xx_init_cpu(void)
+{
+	samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
+	if (!samsung_cpu_id) {
+		/*
+		 * S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read.
+		 */
+		writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
+	}
+
+	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
+	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
+}
diff --git a/arch/arm/mach-s3c/cpu.h b/arch/arm/mach-s3c/cpu.h
new file mode 100644
index 000000000..20ff98d05
--- /dev/null
+++ b/arch/arm/mach-s3c/cpu.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung CPU support
+ */
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
+extern unsigned long samsung_cpu_id;
+
+#define S3C2410_CPU_ID		0x32410000
+#define S3C2410_CPU_MASK	0xFFFFFFFF
+
+#define S3C24XX_CPU_ID		0x32400000
+#define S3C24XX_CPU_MASK	0xFFF00000
+
+#define S3C2412_CPU_ID		0x32412000
+#define S3C2412_CPU_MASK	0xFFFFF000
+
+#define S3C6400_CPU_ID		0x36400000
+#define S3C6410_CPU_ID		0x36410000
+#define S3C64XX_CPU_MASK	0xFFFFF000
+
+#define S5PV210_CPU_ID		0x43110000
+#define S5PV210_CPU_MASK	0xFFFFF000
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+    defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx()	is_samsung_s3c24xx()
+# define soc_is_s3c2410()	is_samsung_s3c2410()
+#else
+# define soc_is_s3c24xx()	0
+# define soc_is_s3c2410()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C2412)
+# define soc_is_s3c2412()	is_samsung_s3c2412()
+#else
+# define soc_is_s3c2412()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400()	is_samsung_s3c6400()
+# define soc_is_s3c6410()	is_samsung_s3c6410()
+# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
+#else
+# define soc_is_s3c6400()	0
+# define soc_is_s3c6410()	0
+# define soc_is_s3c64xx()	0
+#endif
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+	unsigned long	idcode;
+	unsigned long	idmask;
+	void		(*map_io)(void);
+	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+	void		(*init_clocks)(int xtal);
+	int		(*init)(void);
+	const char	*name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cpus, unsigned int cputab_size);
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c64xx_init_cpu(void);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no);
+
+extern struct syscore_ops s3c2410_pm_syscore_ops;
+extern struct syscore_ops s3c2412_pm_syscore_ops;
+extern struct syscore_ops s3c2416_pm_syscore_ops;
+extern struct syscore_ops s3c244x_pm_syscore_ops;
+
+extern struct bus_type s3c6410_subsys;
+
+#endif
diff --git a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
new file mode 100644
index 000000000..c1784d8fa
--- /dev/null
+++ b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include "map.h"
+#include "regs-clock.h"
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+
+#include "regs-mem-s3c24xx.h"
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	if (!IS_ERR(cfg->mpll))
+		clk_set_rate(cfg->mpll, cfg->pll.frequency);
+}
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+u32 s3c2440_read_camdivn(void)
+{
+	return __raw_readl(S3C2440_CAMDIVN);
+}
+
+void s3c2440_write_camdivn(u32 camdiv)
+{
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+}
+#endif
+
+u32 s3c24xx_read_clkdivn(void)
+{
+	return __raw_readl(S3C2410_CLKDIVN);
+}
+
+void s3c24xx_write_clkdivn(u32 clkdiv)
+{
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+u32 s3c24xx_read_mpllcon(void)
+{
+	return __raw_readl(S3C2410_MPLLCON);
+}
+
+void s3c24xx_write_locktime(u32 locktime)
+{
+	return __raw_writel(locktime, S3C2410_LOCKTIME);
+}
diff --git a/arch/arm/mach-s3c/cpuidle-s3c64xx.c b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
new file mode 100644
index 000000000..b1c5f43d4
--- /dev/null
+++ b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Wolfson Microelectronics, plc
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
+
+#include <asm/cpuidle.h>
+
+#include "cpu.h"
+#include "map.h"
+
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
+
+static int s3c64xx_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv,
+			      int index)
+{
+	unsigned long tmp;
+
+	/* Setup PWRCFG to enter idle mode */
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	cpu_do_idle();
+
+	return index;
+}
+
+static struct cpuidle_driver s3c64xx_cpuidle_driver = {
+	.name	= "s3c64xx_cpuidle",
+	.owner  = THIS_MODULE,
+	.states = {
+		{
+			.enter            = s3c64xx_enter_idle,
+			.exit_latency     = 1,
+			.target_residency = 1,
+			.name             = "IDLE",
+			.desc             = "System active, ARM gated",
+		},
+	},
+	.state_count = 1,
+};
+
+static int __init s3c64xx_init_cpuidle(void)
+{
+	if (soc_is_s3c64xx())
+		return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+	return 0;
+}
+device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c/crag6410.h b/arch/arm/mach-s3c/crag6410.h
new file mode 100644
index 000000000..f39ea2ca7
--- /dev/null
+++ b/arch/arm/mach-s3c/crag6410.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include "gpio-samsung.h"
+
+#define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
+#define BANFF_PMIC_IRQ_BASE		(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 32)
+#define BANFF_PMIC_GPIO_BASE		(GPIO_BOARD_START + 64)
+#define MMGPIO_GPIO_BASE		(GPIO_BOARD_START + 96)
+
+#endif
diff --git a/arch/arm/mach-s3c/dev-audio-s3c64xx.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
new file mode 100644
index 000000000..909e82c14
--- /dev/null
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2009 Wolfson Microelectronics
+//      Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+
+#include "irqs.h"
+#include "map.h"
+
+#include "devs.h"
+#include <linux/platform_data/asoc-s3c.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
+{
+	unsigned int base;
+
+	switch (pdev->id) {
+	case 0:
+		base = S3C64XX_GPD(0);
+		break;
+	case 1:
+		base = S3C64XX_GPE(0);
+		break;
+	case 2:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
+		return 0;
+	default:
+		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
+			pdev->id);
+		return -EINVAL;
+	}
+
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
+};
+
+static struct s3c_audio_pdata i2s0_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "samsung-i2s",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+	.dev = {
+		.platform_data = &i2s0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
+};
+
+static struct s3c_audio_pdata i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "samsung-i2s",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+	.dev = {
+		.platform_data = &i2s1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
+};
+
+static struct s3c_audio_pdata i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.quirks = QUIRK_PRI_6CHAN,
+	},
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name = "samsung-i2s",
+	.id = 2,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+	.dev = {
+		.platform_data = &i2sv4_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	unsigned int base;
+
+	switch (pdev->id) {
+	case 0:
+		base = S3C64XX_GPD(0);
+		break;
+	case 1:
+		base = S3C64XX_GPE(0);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
+			pdev->id);
+		return -EINVAL;
+	}
+
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+	return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+	return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_AC97),
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+};
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+	.name		  = "samsung-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
+	.resource	  = s3c64xx_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s3c64xx_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+	if (num == S3C64XX_AC97_GPD)
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+	else
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
new file mode 100644
index 000000000..65488b61e
--- /dev/null
+++ b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+//              http://www.samsung.com
+//
+// Common infrastructure for PWM Backlight for Samsung boards
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/pwm_backlight.h>
+
+#include "devs.h"
+#include "gpio-cfg.h"
+
+#include "backlight-s3c64xx.h"
+
+struct samsung_bl_drvdata {
+	struct platform_pwm_backlight_data plat_data;
+	struct samsung_bl_gpio_info *gpio_info;
+};
+
+static int samsung_bl_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
+
+	ret = gpio_request(bl_gpio_info->no, "Backlight");
+	if (ret) {
+		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
+		return ret;
+	}
+
+	/* Configure GPIO pin with specific GPIO function for PWM timer */
+	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
+
+	return 0;
+}
+
+static void samsung_bl_exit(struct device *dev)
+{
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
+
+	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
+	gpio_free(bl_gpio_info->no);
+}
+
+/* Initialize few important fields of platform_pwm_backlight_data
+ * structure with default values. These fields can be overridden by
+ * board-specific values sent from machine file.
+ * For ease of operation, these fields are initialized with values
+ * used by most samsung boards.
+ * Users has the option of sending info about other parameters
+ * for their specific boards
+ */
+
+static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
+	.plat_data = {
+		.max_brightness = 255,
+		.dft_brightness = 255,
+		.init           = samsung_bl_init,
+		.exit           = samsung_bl_exit,
+	},
+};
+
+static struct platform_device samsung_dfl_bl_device __initdata = {
+	.name		= "pwm-backlight",
+};
+
+/* samsung_bl_set - Set board specific data (if any) provided by user for
+ * PWM Backlight control and register specific PWM and backlight device.
+ * @gpio_info:	structure containing GPIO info for PWM timer
+ * @bl_data:	structure containing Backlight control data
+ */
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+	struct platform_pwm_backlight_data *bl_data)
+{
+	int ret = 0;
+	struct platform_device *samsung_bl_device;
+	struct samsung_bl_drvdata *samsung_bl_drvdata;
+	struct platform_pwm_backlight_data *samsung_bl_data;
+
+	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
+			sizeof(struct platform_device), GFP_KERNEL);
+	if (!samsung_bl_device)
+		return;
+
+	samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
+				sizeof(samsung_dfl_bl_data), GFP_KERNEL);
+	if (!samsung_bl_drvdata)
+		goto err_data;
+
+	samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
+	samsung_bl_drvdata->gpio_info = gpio_info;
+	samsung_bl_data = &samsung_bl_drvdata->plat_data;
+
+	/* Copy board specific data provided by user */
+	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
+
+	if (bl_data->max_brightness)
+		samsung_bl_data->max_brightness = bl_data->max_brightness;
+	if (bl_data->dft_brightness)
+		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
+	if (bl_data->lth_brightness)
+		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
+	if (bl_data->init)
+		samsung_bl_data->init = bl_data->init;
+	if (bl_data->notify)
+		samsung_bl_data->notify = bl_data->notify;
+	if (bl_data->notify_after)
+		samsung_bl_data->notify_after = bl_data->notify_after;
+	if (bl_data->exit)
+		samsung_bl_data->exit = bl_data->exit;
+	if (bl_data->check_fb)
+		samsung_bl_data->check_fb = bl_data->check_fb;
+
+	/* Register the Backlight dev */
+	ret = platform_device_register(samsung_bl_device);
+	if (ret) {
+		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
+		goto err_plat_reg2;
+	}
+
+	return;
+
+err_plat_reg2:
+	kfree(samsung_bl_data);
+err_data:
+	kfree(samsung_bl_device);
+}
diff --git a/arch/arm/mach-s3c/dev-uart-s3c64xx.c b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
new file mode 100644
index 000000000..f9c947b89
--- /dev/null
+++ b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX UART resource and device definitions
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include "map.h"
+#include "irqs.h"
+
+#include "devs.h"
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_UART0, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART0),
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_UART1, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART1),
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_UART2, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART2),
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_UART3, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART3),
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c64xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c64xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c6xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c64xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
+	},
+};
diff --git a/arch/arm/mach-s3c/dev-uart.c b/arch/arm/mach-s3c/dev-uart.c
new file mode 100644
index 000000000..3d1f7f2fd
--- /dev/null
+++ b/arch/arm/mach-s3c/dev-uart.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//	originally from arch/arm/plat-s3c24xx/devs.c
+//
+// Copyright (c) 2004 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Base S3C24XX platform device definitions
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include "devs.h"
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
new file mode 100644
index 000000000..9ac07c023
--- /dev/null
+++ b/arch/arm/mach-s3c/devs.c
@@ -0,0 +1,1126 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Base Samsung platform device definitions
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
+#include <linux/ioport.h>
+#include <linux/sizes.h>
+#include <linux/platform_data/s3c-hsudc.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+
+#include <linux/platform_data/media/s5p_hdmi.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "irqs.h"
+#include "map.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#ifdef CONFIG_PLAT_S3C24XX
+#include "regs-s3c2443-clock.h"
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#include "cpu.h"
+#include "devs.h"
+#include <linux/soc/samsung/s3c-adc.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include "fb.h"
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "keypad.h"
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include "pwm-core.h"
+#include "sdhci.h"
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include "usb-phy.h"
+#include <linux/platform_data/asoc-s3c.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+
+#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
+
+/* AC97 */
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_ac97_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
+};
+
+struct platform_device s3c_device_ac97 = {
+	.name		= "samsung-ac97",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_ac97_resource),
+	.resource	= s3c_ac97_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ADC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_adc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+	[1] = DEFINE_RES_IRQ(IRQ_TC),
+	[2] = DEFINE_RES_IRQ(IRQ_ADC),
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "s3c24xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#if defined(CONFIG_SAMSUNG_DEV_ADC)
+static struct resource s3c_adc_resource[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_ADC),
+	[2] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "exynos-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
+#endif /* CONFIG_SAMSUNG_DEV_ADC */
+
+/* Camif Controller */
+
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_camif_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
+};
+
+struct platform_device s3c_device_camif = {
+	.name		= "s3c2440-camif",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_camif_resource),
+	.resource	= s3c_camif_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* FB */
+
+#ifdef CONFIG_S3C_DEV_FB
+static struct resource s3c_fb_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
+	[1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
+	[2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
+	[3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
+};
+
+struct platform_device s3c_device_fb = {
+	.name		= "s3c-fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_fb_resource),
+	.resource	= s3c_fb_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+			 &s3c_device_fb);
+}
+#endif /* CONFIG_S3C_DEV_FB */
+
+/* HWMON */
+
+#ifdef CONFIG_S3C_DEV_HWMON
+struct platform_device s3c_device_hwmon = {
+	.name		= "s3c-hwmon",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
+			 &s3c_device_hwmon);
+}
+#endif /* CONFIG_S3C_DEV_HWMON */
+
+/* HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static struct resource s3c_hsmmc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+	.name		= "s3c-sdhci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
+	.resource	= s3c_hsmmc_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc0_def_platdata,
+	},
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static struct resource s3c_hsmmc1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+	.name		= "s3c-sdhci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
+	.resource	= s3c_hsmmc1_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc1_def_platdata,
+	},
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+/* HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC3
+static struct resource s3c_hsmmc3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+	.name		= "s3c-sdhci",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
+	.resource	= s3c_hsmmc3_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc3_def_platdata,
+	},
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC3 */
+
+/* I2C */
+
+static struct resource s3c_i2c0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC),
+};
+
+struct platform_device s3c_device_i2c0 = {
+	.name		= "s3c2410-i2c",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_i2c0_resource),
+	.resource	= s3c_i2c0_resource,
+};
+
+struct s3c2410_platform_i2c default_i2c_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 0;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c0);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+}
+
+#ifdef CONFIG_S3C_DEV_I2C1
+static struct resource s3c_i2c1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC1),
+};
+
+struct platform_device s3c_device_i2c1 = {
+	.name		= "s3c2410-i2c",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_i2c1_resource),
+	.resource	= s3c_i2c1_resource,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 1;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c1);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C1 */
+
+#ifdef CONFIG_S3C_DEV_I2C2
+static struct resource s3c_i2c2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC2),
+};
+
+struct platform_device s3c_device_i2c2 = {
+	.name		= "s3c2410-i2c",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_i2c2_resource),
+	.resource	= s3c_i2c2_resource,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 2;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C2 */
+
+#ifdef CONFIG_S3C_DEV_I2C3
+static struct resource s3c_i2c3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC3),
+};
+
+struct platform_device s3c_device_i2c3 = {
+	.name		= "s3c2440-i2c",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_i2c3_resource),
+	.resource	= s3c_i2c3_resource,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 3;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C3 */
+
+#ifdef CONFIG_S3C_DEV_I2C4
+static struct resource s3c_i2c4_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC4),
+};
+
+struct platform_device s3c_device_i2c4 = {
+	.name		= "s3c2440-i2c",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(s3c_i2c4_resource),
+	.resource	= s3c_i2c4_resource,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 4;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C4 */
+
+#ifdef CONFIG_S3C_DEV_I2C5
+static struct resource s3c_i2c5_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC5),
+};
+
+struct platform_device s3c_device_i2c5 = {
+	.name		= "s3c2440-i2c",
+	.id		= 5,
+	.num_resources	= ARRAY_SIZE(s3c_i2c5_resource),
+	.resource	= s3c_i2c5_resource,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 5;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C5 */
+
+#ifdef CONFIG_S3C_DEV_I2C6
+static struct resource s3c_i2c6_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC6),
+};
+
+struct platform_device s3c_device_i2c6 = {
+	.name		= "s3c2440-i2c",
+	.id		= 6,
+	.num_resources	= ARRAY_SIZE(s3c_i2c6_resource),
+	.resource	= s3c_i2c6_resource,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 6;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C6 */
+
+#ifdef CONFIG_S3C_DEV_I2C7
+static struct resource s3c_i2c7_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC7),
+};
+
+struct platform_device s3c_device_i2c7 = {
+	.name		= "s3c2440-i2c",
+	.id		= 7,
+	.num_resources	= ARRAY_SIZE(s3c_i2c7_resource),
+	.resource	= s3c_i2c7_resource,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 7;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C7 */
+
+/* I2S */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_iis_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
+};
+
+struct platform_device s3c_device_iis = {
+	.name		= "s3c24xx-iis",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_iis_resource),
+	.resource	= s3c_iis_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* IDE CFCON */
+
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+static struct resource s3c_cfcon_resource[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
+	[1] = DEFINE_RES_IRQ(IRQ_CFCON),
+};
+
+struct platform_device s3c_device_cfcon = {
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
+	.resource	= s3c_cfcon_resource,
+};
+
+void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+			 &s3c_device_cfcon);
+}
+#endif /* CONFIG_SAMSUNG_DEV_IDE */
+
+/* KEYPAD */
+
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+static struct resource samsung_keypad_resources[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
+	[1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
+};
+
+struct platform_device samsung_device_keypad = {
+	.name		= "samsung-keypad",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
+	.resource	= samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+	struct samsung_keypad_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &samsung_device_keypad);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
+#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
+
+/* LCD Controller */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_lcd_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
+	[1] = DEFINE_RES_IRQ(IRQ_LCD),
+};
+
+struct platform_device s3c_device_lcd = {
+	.name		= "s3c2410-lcd",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_lcd_resource),
+	.resource	= s3c_lcd_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
+{
+	struct s3c2410fb_mach_info *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
+	if (npd) {
+		npd->displays = kmemdup(pd->displays,
+			sizeof(struct s3c2410fb_display) * npd->num_displays,
+			GFP_KERNEL);
+		if (!npd->displays)
+			printk(KERN_ERR "no memory for LCD display data\n");
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* NAND */
+
+#ifdef CONFIG_S3C_DEV_NAND
+static struct resource s3c_nand_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
+};
+
+struct platform_device s3c_device_nand = {
+	.name		= "s3c2410-nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_nand_resource),
+	.resource	= s3c_nand_resource,
+};
+
+/*
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->nr_map && set->nr_chips) {
+		size = sizeof(int) * set->nr_chips;
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */
+
+	npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
+	if (!npd)
+		return;
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+}
+#endif /* CONFIG_S3C_DEV_NAND */
+
+/* ONENAND */
+
+#ifdef CONFIG_S3C_DEV_ONENAND
+static struct resource s3c_onenand_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
+	[1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
+	[2] = DEFINE_RES_IRQ(IRQ_ONENAND),
+};
+
+struct platform_device s3c_device_onenand = {
+	.name		= "samsung-onenand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
+	.resource	= s3c_onenand_resources,
+};
+#endif /* CONFIG_S3C_DEV_ONENAND */
+
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+static struct resource s3c64xx_onenand1_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
+	[2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+	.name		= "samsung-onenand",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
+	.resource	= s3c64xx_onenand1_resources,
+};
+
+void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
+			 &s3c64xx_device_onenand1);
+}
+#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
+
+/* PWM Timer */
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+static struct resource samsung_pwm_resource[] = {
+	DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K),
+};
+
+struct platform_device samsung_device_pwm = {
+	.name		= "samsung-pwm",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_pwm_resource),
+	.resource	= samsung_pwm_resource,
+};
+
+void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
+{
+	samsung_device_pwm.dev.platform_data = pd;
+}
+#endif /* CONFIG_SAMSUNG_DEV_PWM */
+
+/* RTC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_rtc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_RTC),
+	[2] = DEFINE_RES_IRQ(IRQ_TICK),
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		= "s3c2410-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
+	.resource	= s3c_rtc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_S3C_DEV_RTC
+static struct resource s3c_rtc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
+	[2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		= "s3c64xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
+	.resource	= s3c_rtc_resource,
+};
+#endif /* CONFIG_S3C_DEV_RTC */
+
+/* SDI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		/* Configure GPE5...GPE10 pins in SD mode */
+		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+				      S3C_GPIO_PULL_NONE);
+		break;
+
+	case MMC_POWER_OFF:
+	default:
+		gpio_direction_output(S3C2410_GPE(5), 0);
+		break;
+	}
+}
+
+static struct resource s3c_sdi_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
+	[1] = DEFINE_RES_IRQ(IRQ_SDI),
+};
+
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+	/* This is currently here to avoid a number of if (host->pdata)
+	 * checks. Any zero fields to ensure reasonable defaults are picked. */
+	.no_wprotect = 1,
+	.no_detect = 1,
+	.set_power = s3c24xx_mci_def_set_power,
+};
+
+struct platform_device s3c_device_sdi = {
+	.name		= "s3c2410-sdi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_sdi_resource),
+	.resource	= s3c_sdi_resource,
+	.dev.platform_data = &s3cmci_def_pdata,
+};
+
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
+			 &s3c_device_sdi);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* SPI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_spi0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c_device_spi0 = {
+	.name		= "s3c2410-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_spi0_resource),
+	.resource	= s3c_spi0_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+static struct resource s3c_spi1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c_device_spi1 = {
+	.name		= "s3c2410-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_spi1_resource),
+	.resource	= s3c_spi1_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* Touchscreen */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_ts_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+	[1] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c2410-ts",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
+	.resource	= s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+	s3c_set_platdata(hard_s3c2410ts_info,
+			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_SAMSUNG_DEV_TS
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+	if (!pd)
+		pd = &default_ts_data;
+
+	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
+			 &s3c_device_adc);
+}
+#endif /* CONFIG_SAMSUNG_DEV_TS */
+
+/* USB */
+
+#ifdef CONFIG_S3C_DEV_USB_HOST
+static struct resource s3c_usb_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_USBH),
+};
+
+struct platform_device s3c_device_ohci = {
+	.name		= "s3c2410-ohci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_resource),
+	.resource	= s3c_usb_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+/*
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
+			 &s3c_device_ohci);
+}
+#endif /* CONFIG_S3C_DEV_USB_HOST */
+
+/* USB Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_usbgadget_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
+	[1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usbgadget = {
+	.name		= "s3c2410-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usbgadget_resource),
+	.resource	= s3c_usbgadget_resource,
+};
+
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* USB HSOTG */
+
+#ifdef CONFIG_S3C_DEV_USB_HSOTG
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
+	[1] = DEFINE_RES_IRQ(IRQ_OTG),
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
+{
+	struct dwc2_hsotg_plat *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg);
+
+	if (!npd->phy_init)
+		npd->phy_init = s3c_usb_phy_init;
+	if (!npd->phy_exit)
+		npd->phy_exit = s3c_usb_phy_exit;
+}
+#endif /* CONFIG_S3C_DEV_USB_HSOTG */
+
+/* USB High Spped 2.0 Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_hsudc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
+	[1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usb_hsudc = {
+	.name		= "s3c-hsudc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
+	.resource	= s3c_hsudc_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+	pd->phy_init = s3c_hsudc_init_phy;
+	pd->phy_uninit = s3c_hsudc_uninit_phy;
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* WDT */
+
+#ifdef CONFIG_S3C_DEV_WDT
+static struct resource s3c_wdt_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
+	[1] = DEFINE_RES_IRQ(IRQ_WDT),
+};
+
+struct platform_device s3c_device_wdt = {
+	.name		= "s3c2410-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
+	.resource	= s3c_wdt_resource,
+};
+#endif /* CONFIG_S3C_DEV_WDT */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		= "s3c6410-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	= s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0) {
+		pr_err("%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	pd.num_cs = num_cs;
+	pd.src_clk_nr = src_clk_nr;
+	pd.cfg_gpio = s3c64xx_spi0_cfg_gpio;
+
+	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI0 */
diff --git a/arch/arm/mach-s3c/devs.h b/arch/arm/mach-s3c/devs.h
new file mode 100644
index 000000000..991b9b200
--- /dev/null
+++ b/arch/arm/mach-s3c/devs.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ */
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+	struct resource		*resources;
+	unsigned long		 nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c64xx_device_ac97;
+extern struct platform_device s3c64xx_device_iis0;
+extern struct platform_device s3c64xx_device_iis1;
+extern struct platform_device s3c64xx_device_iisv4;
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c64xx_device_spi0;
+
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_cfcon;
+extern struct platform_device s3c_device_fb;
+extern struct platform_device s3c_device_hwmon;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_ohci;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_timer[];
+extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s3c_device_usb_hsudc;
+extern struct platform_device s3c_device_wdt;
+
+extern struct platform_device samsung_asoc_idma;
+extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_pwm;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
+
+#endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */
diff --git a/arch/arm/mach-s3c/dma-s3c24xx.h b/arch/arm/mach-s3c/dma-s3c24xx.h
new file mode 100644
index 000000000..25fc9c258
--- /dev/null
+++ b/arch/arm/mach-s3c/dma-s3c24xx.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/device.h>
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependent on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+	DMACH_XD0 = 0,
+	DMACH_XD1,
+	DMACH_SDI,
+	DMACH_SPI0,
+	DMACH_SPI1,
+	DMACH_UART0,
+	DMACH_UART1,
+	DMACH_UART2,
+	DMACH_TIMER,
+	DMACH_I2S_IN,
+	DMACH_I2S_OUT,
+	DMACH_PCM_IN,
+	DMACH_PCM_OUT,
+	DMACH_MIC_IN,
+	DMACH_USB_EP1,
+	DMACH_USB_EP2,
+	DMACH_USB_EP3,
+	DMACH_USB_EP4,
+	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
+	DMACH_UART1_SRC2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
+	DMACH_MAX,		/* the end entry */
+};
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c/dma-s3c64xx.h b/arch/arm/mach-s3c/dma-s3c64xx.h
new file mode 100644
index 000000000..40ca8de21
--- /dev/null
+++ b/arch/arm/mach-s3c/dma-s3c64xx.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0		"uart0_tx"
+#define DMACH_UART0_SRC2	"uart0_rx"
+#define DMACH_UART1		"uart1_tx"
+#define DMACH_UART1_SRC2	"uart1_rx"
+#define DMACH_UART2		"uart2_tx"
+#define DMACH_UART2_SRC2	"uart2_rx"
+#define DMACH_UART3		"uart3_tx"
+#define DMACH_UART3_SRC2	"uart3_rx"
+#define DMACH_PCM0_TX		"pcm0_tx"
+#define DMACH_PCM0_RX		"pcm0_rx"
+#define DMACH_I2S0_OUT		"i2s0_tx"
+#define DMACH_I2S0_IN		"i2s0_rx"
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	"i2s2_tx"
+#define DMACH_HSI_I2SV40_RX	"i2s2_rx"
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		"pcm1_tx"
+#define DMACH_PCM1_RX		"pcm1_rx"
+#define DMACH_I2S1_OUT		"i2s1_tx"
+#define DMACH_I2S1_IN		"i2s1_rx"
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	"ac97_out"
+#define DMACH_AC97_PCMIN	"ac97_in"
+#define DMACH_AC97_MICIN	"ac97_mic"
+#define DMACH_PWM		"pwm"
+#define DMACH_IRDA		"irda"
+#define DMACH_EXTERNAL		"external"
+#define DMACH_SECURITY_RX	"sec_rx"
+#define DMACH_SECURITY_TX	"sec_tx"
+
+enum dma_ch {
+	DMACH_MAX = 32
+};
+
+#include <linux/amba/pl08x.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
new file mode 100644
index 000000000..59a4578c5
--- /dev/null
+++ b/arch/arm/mach-s3c/dma.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "dma-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "dma-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/fb-core-s3c24xx.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
new file mode 100644
index 000000000..0e07f3ba4
--- /dev/null
+++ b/arch/arm/mach-s3c/fb-core-s3c24xx.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *	Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Samsung framebuffer driver core functions
+ */
+#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H
+#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name depending on support. */
+static inline void s3c_fb_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_FB
+	s3c_device_fb.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/fb.h b/arch/arm/mach-s3c/fb.h
new file mode 100644
index 000000000..615d381ae
--- /dev/null
+++ b/arch/arm/mach-s3c/fb.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ */
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+#include <linux/platform_data/video_s3c.h>
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg-helpers.h b/arch/arm/mach-s3c/gpio-cfg-helpers.h
new file mode 100644
index 000000000..db0c56f5c
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-cfg-helpers.h
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung Platform - GPIO pin configuration helper definitions
+ */
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+					 unsigned int off, unsigned int config)
+{
+	return (chip->config->set_config)(chip, off, config);
+}
+
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+					      unsigned int off)
+{
+	return (chip->config->get_config)(chip, off);
+}
+
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+					  unsigned int off, samsung_gpio_pull_t pull)
+{
+	return (chip->config->set_pull)(chip, off, pull);
+}
+
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+							  unsigned int off)
+{
+	return chip->config->get_pull(chip, off);
+}
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+				    unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+				      unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = No pull resistor connected
+ *	01 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ */
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				       unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
+*/
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						       unsigned int off);
+
+/**
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-up resistor for the
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
+*/
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+						    unsigned int off);
+
+/**
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
+*/
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+						      unsigned int off);
+
+/**
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ *	x1 = No pull up resistor
+ */
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
+*/
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+						unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg.h b/arch/arm/mach-s3c/gpio-cfg.h
new file mode 100644
index 000000000..469c220e0
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-cfg.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ */
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+#include <linux/types.h>
+
+typedef unsigned int __bitwise samsung_gpio_pull_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct samsung_gpio_chip;
+
+/**
+ * struct samsung_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuration for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ *
+ * @sa samsung_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
+ */
+struct samsung_gpio_cfg {
+	unsigned int	cfg_eint;
+
+	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+				    samsung_gpio_pull_t pull);
+
+	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
+			       unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
+#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
+
+#define samsung_gpio_is_cfg_special(_cfg) \
+	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @to to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ *	for (gpio = start; gpio < end; gpio++)
+ *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/**
+ * s3c_gpio_getcfg - Read the current function for a GPIO pin
+ * @pin: The pin to read the configuration value for.
+ *
+ * Read the configuration state of the given @pin, returning a value that
+ * could be passed back to s3c_gpio_cfgpin().
+ *
+ * @sa s3c_gpio_cfgpin
+ */
+extern unsigned s3c_gpio_getcfg(unsigned int pin);
+
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+				 unsigned int cfg);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependent on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successful, or a negative error
+ * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+				 unsigned int cfg, samsung_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+					   unsigned int cfg)
+{
+	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
+#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/mach-s3c/gpio-core.h b/arch/arm/mach-s3c/gpio-core.h
new file mode 100644
index 000000000..b361c8c0d
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-core.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ */
+
+#ifndef __PLAT_SAMSUNG_GPIO_CORE_H
+#define __PLAT_SAMSUNG_GPIO_CORE_H
+
+/* Bring in machine-local definitions, especially S3C_GPIO_END */
+#include "gpio-samsung.h"
+#include <linux/gpio/driver.h>
+
+#define GPIOCON_OFF	(0x00)
+#define GPIODAT_OFF	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct samsung_gpio_chip;
+
+/**
+ * struct samsung_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct samsung_gpio_pm {
+	void (*save)(struct samsung_gpio_chip *chip);
+	void (*resume)(struct samsung_gpio_chip *chip);
+};
+
+struct samsung_gpio_cfg;
+
+/**
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
+ * @config: special function and pull-resistor control information.
+ * @lock: Lock for exclusive access to this gpio bank.
+ * @pm_save: Save information for suspend/resume support.
+ * @bitmap_gpio_int: Bitmap for representing GPIO interrupt or not.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ *
+ * The lock protects each gpio bank from multiple access of the shared
+ * configuration registers, or from reading of data whilst another thread
+ * is writing to the register set.
+ *
+ * Each chip has its own lock to avoid any  contention between different
+ * CPU cores trying to get one lock for different GPIO banks, where each
+ * bank of GPIO has its own register space and configuration registers.
+ */
+struct samsung_gpio_chip {
+	struct gpio_chip	chip;
+	struct samsung_gpio_cfg	*config;
+	struct samsung_gpio_pm	*pm;
+	void __iomem		*base;
+	int			irq_base;
+	int			group;
+	spinlock_t		 lock;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
+	u32			bitmap_gpio_int;
+};
+
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct samsung_gpio_chip, chip);
+}
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
+/* exported for core SoC support to change */
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
+{
+	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide samsung_gpiolib_getchip */
+
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip;
+
+	if (pin > S3C_GPIO_END)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
+
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
+#endif
+
+#ifdef CONFIG_PM
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
+
+/* locking wrappers to deal with multiple access to the same gpio bank */
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+
+#endif /* __PLAT_SAMSUNG_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
new file mode 100644
index 000000000..c29fdc95f
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ */
+
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#ifndef GPIO_SAMSUNG_S3C24XX_H
+#define GPIO_SAMSUNG_S3C24XX_H
+
+#include "map.h"
+
+/*
+ * GPIO sizes for various SoCs:
+ *
+ *   2410 2412 2440 2443 2416
+ *             2442
+ *   ---- ---- ---- ---- ----
+ * A  23   22   25   16   27
+ * B  11   11   11   11   11
+ * C  16   16   16   16   16
+ * D  16   16   16   16   16
+ * E  16   16   16   16   16
+ * F  8    8    8    8    8
+ * G  16   16   16   16   8
+ * H  11   11   11   15   15
+ * J  --   --   13   16   --
+ * K  --   --   --   --   16
+ * L  --   --   --   15   14
+ * M  --   --   --   2    2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
+#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
+
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
+#else
+#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
+#endif
+
+#endif /* GPIO_SAMSUNG_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
new file mode 100644
index 000000000..8ed144a0d
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ */
+
+#ifndef GPIO_SAMSUNG_S3C64XX_H
+#define GPIO_SAMSUNG_S3C64XX_H
+
+#ifdef CONFIG_GPIO_SAMSUNG
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR	(8)
+#define S3C64XX_GPIO_B_NR	(7)
+#define S3C64XX_GPIO_C_NR	(8)
+#define S3C64XX_GPIO_D_NR	(5)
+#define S3C64XX_GPIO_E_NR	(5)
+#define S3C64XX_GPIO_F_NR	(16)
+#define S3C64XX_GPIO_G_NR	(7)
+#define S3C64XX_GPIO_H_NR	(10)
+#define S3C64XX_GPIO_I_NR	(16)
+#define S3C64XX_GPIO_J_NR	(12)
+#define S3C64XX_GPIO_K_NR	(16)
+#define S3C64XX_GPIO_L_NR	(15)
+#define S3C64XX_GPIO_M_NR	(6)
+#define S3C64XX_GPIO_N_NR	(16)
+#define S3C64XX_GPIO_O_NR	(16)
+#define S3C64XX_GPIO_P_NR	(15)
+#define S3C64XX_GPIO_Q_NR	(9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S3C64XX_GPIO_A_START = 0,
+	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END		S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#endif /* GPIO_SAMSUNG */
+#endif /* GPIO_SAMSUNG_S3C64XX_H */
+
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
new file mode 100644
index 000000000..b7fc7c413
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -0,0 +1,1325 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//      Ben Dooks <ben@simtec.co.uk>
+//      http://armlinux.simtec.co.uk/
+//
+// Samsung - GPIOlib support
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+
+#include <asm/irq.h>
+
+#include "irqs.h"
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "hardware-s3c24xx.h"
+#include "pm.h"
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+			 unsigned int off, samsung_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+				  unsigned int off, samsung_gpio_pull_t pull,
+				  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	if (pull == updown)
+		pup &= ~(1 << off);
+	else if (pull == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+						  unsigned int off,
+						  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+			     unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+					       unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+			       unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+					  unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config = samsung_gpio_setcfg_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config = samsung_gpio_getcfg_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull = samsung_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull = samsung_gpio_getpull_updown;
+	}
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= samsung_gpio_setcfg_2bit,
+	.get_config	= samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c24xx_gpio_setcfg_abank,
+	.get_config	= s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+	[0] = {
+		.cfg_eint	= 0x0,
+	},
+	[1] = {
+		.cfg_eint	= 0x3,
+	},
+	[2] = {
+		.cfg_eint	= 0x7,
+	},
+	[3] = {
+		.cfg_eint	= 0xF,
+	},
+	[4] = {
+		.cfg_eint	= 0x0,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[5] = {
+		.cfg_eint	= 0x2,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[6] = {
+		.cfg_eint	= 0x3,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[7] = {
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	if (ourchip->bitmap_gpio_int & BIT(offset))
+		con |= 0xf << con_4bit_shift(offset);
+	else
+		con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+#endif
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = samsung_gpiolib_2bit_input;
+	if (!gc->direction_output)
+		gc->direction_output = samsung_gpiolib_2bit_output;
+	if (!gc->set)
+		gc->set = samsung_gpiolib_set;
+	if (!gc->get)
+		gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			pr_err("gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		pr_err("gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add_data(gc, chip);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+					     int nr_chips, void __iomem *base)
+{
+	int i;
+	struct gpio_chip *gc = &chip->chip;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		/* skip banks not present on SoC */
+		if (chip->chip.base >= S3C_GPIO_END)
+			continue;
+
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x10);
+
+		if (!gc->direction_input)
+			gc->direction_input = samsung_gpiolib_2bit_input;
+		if (!gc->direction_output)
+			gc->direction_output = samsung_gpiolib_2bit_output;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base,
+						  unsigned int offset)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_2bit_input;
+		chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[7];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * offset);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x20);
+
+		chip->bitmap_gpio_int = 0;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+						   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip);
+
+	return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 4) {
+		if (soc_is_s3c2412())
+			return IRQ_EINT0_2412 + offset;
+		else
+			return IRQ_EINT0 + offset;
+	}
+
+	if (offset < 8)
+		return IRQ_EINT4 + offset - 4;
+
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+	{
+		.config	= &s3c24xx_gpiocfg_banka,
+		.chip	= {
+			.base			= S3C2410_GPA(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 27,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPB(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOB",
+			.ngpio	= 11,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPC(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOC",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPD(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOD",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPE(0),
+			.label	= "GPIOE",
+			.owner	= THIS_MODULE,
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPF(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOF",
+			.ngpio	= 8,
+			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
+		},
+	}, {
+		.irq_base = IRQ_EINT8,
+		.chip	= {
+			.base	= S3C2410_GPG(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOG",
+			.ngpio	= 16,
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPH(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOH",
+			.ngpio	= 15,
+		},
+	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.chip	= {
+			.base	= S3C2410_GPJ(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOJ",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.chip	= {
+			.base	= S3C2410_GPK(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOK",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.chip	= {
+			.base	= S3C2410_GPL(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOL",
+			.ngpio	= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.chip	= {
+			.base	= S3C2410_GPM(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOM",
+			.ngpio	= 2,
+		},
+	},
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+	/*
+	 * Currently there are two drivers that can provide GPIO support for
+	 * Samsung SoCs. For device tree enabled platforms, the new
+	 * pinctrl-samsung driver is used, providing both GPIO and pin control
+	 * interfaces. For legacy (non-DT) platforms this driver is used.
+	 */
+	if (of_have_populated_dt())
+		return 0;
+
+	if (soc_is_s3c24xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
+		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
+		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+				ARRAY_SIZE(s3c64xx_gpios_2bit),
+				S3C64XX_VA_GPIO + 0xE0, 0x20);
+		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+				ARRAY_SIZE(s3c64xx_gpios_4bit),
+				S3C64XX_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+				ARRAY_SIZE(s3c64xx_gpios_4bit2));
+	}
+
+	return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setcfg(chip, offset, config);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, samsung_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		ret = samsung_gpio_do_getcfg(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setpull(chip, offset, pull);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		pup = samsung_gpio_do_getpull(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
new file mode 100644
index 000000000..02f6f4a96
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-samsung.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "gpio-samsung-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "gpio-samsung-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/gta02.h b/arch/arm/mach-s3c/gta02.h
new file mode 100644
index 000000000..043ae382b
--- /dev/null
+++ b/arch/arm/mach-s3c/gta02.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * GTA02 header
+ */
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
+
+#include "regs-gpio.h"
+
+#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
+#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
+#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
+#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_PCF50633	IRQ_EINT9
+
+#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
new file mode 100644
index 000000000..59edcf8a6
--- /dev/null
+++ b/arch/arm/mach-s3c/h1940-bluetooth.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-1.0+
+//
+// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
+//
+//	    S3C2410 bluetooth "driver"
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/rfkill.h>
+
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "h1940.h"
+
+#define DRV_NAME "h1940-bt"
+
+/* Bluetooth control */
+static void h1940bt_enable(int on)
+{
+	if (on) {
+		/* Power on the chip */
+		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
+		/* Reset the chip */
+		mdelay(10);
+
+		gpio_set_value(S3C2410_GPH(1), 1);
+		mdelay(10);
+		gpio_set_value(S3C2410_GPH(1), 0);
+
+		h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
+	}
+	else {
+		gpio_set_value(S3C2410_GPH(1), 1);
+		mdelay(10);
+		gpio_set_value(S3C2410_GPH(1), 0);
+		mdelay(10);
+		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
+
+		h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
+	}
+}
+
+static int h1940bt_set_block(void *data, bool blocked)
+{
+	h1940bt_enable(!blocked);
+	return 0;
+}
+
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
+
+static int h1940bt_probe(struct platform_device *pdev)
+{
+	struct rfkill *rfk;
+	int ret = 0;
+
+	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
+	if (ret) {
+		dev_err(&pdev->dev, "could not get GPH1\n");
+		return ret;
+	}
+
+	ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
+	if (ret) {
+		gpio_free(S3C2410_GPH(1));
+		dev_err(&pdev->dev, "could not get BT_POWER\n");
+		return ret;
+	}
+
+	/* Configures BT serial port GPIOs */
+	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
+
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
+}
+
+static int h1940bt_remove(struct platform_device *pdev)
+{
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	gpio_free(S3C2410_GPH(1));
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
+	return 0;
+}
+
+
+static struct platform_driver h1940bt_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+	.probe		= h1940bt_probe,
+	.remove		= h1940bt_remove,
+};
+
+module_platform_driver(h1940bt_driver);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-s3c/h1940.h b/arch/arm/mach-s3c/h1940.h
new file mode 100644
index 000000000..5dfe9d10c
--- /dev/null
+++ b/arch/arm/mach-s3c/h1940.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * iPAQ H1940 series definitions
+ */
+
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
+
+#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT		(0x30081000)
+#define H1940_SUSPEND_CHECK		(0x30080000)
+
+struct gpio_desc;
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off);
+
+#include <linux/gpio.h>
+
+#define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
+
+/* SD layer latch */
+
+#define H1940_LATCH_LCD_P0		H1940_LATCH_GPIO(0)
+#define H1940_LATCH_LCD_P1		H1940_LATCH_GPIO(1)
+#define H1940_LATCH_LCD_P2		H1940_LATCH_GPIO(2)
+#define H1940_LATCH_LCD_P3		H1940_LATCH_GPIO(3)
+#define H1940_LATCH_MAX1698_nSHUTDOWN	H1940_LATCH_GPIO(4)
+#define H1940_LATCH_LED_RED		H1940_LATCH_GPIO(5)
+#define H1940_LATCH_SDQ7		H1940_LATCH_GPIO(6)
+#define H1940_LATCH_USB_DP		H1940_LATCH_GPIO(7)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER		H1940_LATCH_GPIO(8)
+#define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
+#define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
+#define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
+#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
+#define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
+#define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
+#define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
+
+#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
new file mode 100644
index 000000000..33b37467d
--- /dev/null
+++ b/arch/arm/mach-s3c/hardware-s3c24xx.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H
+#define __ASM_ARCH_HARDWARE_S3C24XX_H
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/iic-core.h b/arch/arm/mach-s3c/iic-core.h
new file mode 100644
index 000000000..c5cfd5af3
--- /dev/null
+++ b/arch/arm/mach-s3c/iic-core.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ */
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+	/* currently this device is always compiled in */
+	s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+	s3c_device_i2c1.name = name;
+#endif
+}
+
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+	s3c_device_i2c2.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c
new file mode 100644
index 000000000..bf513616f
--- /dev/null
+++ b/arch/arm/mach-s3c/init.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// S3C series CPU initialisation
+
+/*
+ * NOTE: Code in this file is not used on S3C64xx when booting with
+ * Device Tree support.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "cpu.h"
+#include "devs.h"
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+						struct cpu_table *tab,
+						unsigned int count)
+{
+	for (; count != 0; count--, tab++) {
+		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
+			return tab;
+	}
+
+	return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cputab, unsigned int cputab_size)
+{
+	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+	if (cpu == NULL) {
+		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+		panic("Unknown S3C24XX CPU");
+	}
+
+	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+	if (cpu->init == NULL) {
+		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+		panic("Unsupported Samsung CPU");
+	}
+
+	if (cpu->map_io)
+		cpu->map_io();
+
+	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
+ *      != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+	if (xtal == 0)
+		xtal = 12*1000*1000;
+
+	if (cpu == NULL)
+		panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+	if (cpu->init_clocks == NULL)
+		panic("s3c24xx_init_clocks: cpu has no clock init\n");
+	else
+		(cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
+static int nr_uarts __initdata = 0;
+
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
+static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no)
+{
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
+	struct platform_device *platdev;
+	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+	struct s3c24xx_uart_resources *resp;
+	int uart;
+
+	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+		platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+		resp = res + cfgptr->hwport;
+
+		s3c24xx_uart_devs[uart] = platdev;
+
+		platdev->name = name;
+		platdev->resource = resp->resources;
+		platdev->num_resources = resp->nr_resources;
+
+		platdev->dev.platform_data = cfgptr;
+	}
+
+	nr_uarts = no;
+#endif
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	if (cpu == NULL)
+		return;
+
+	if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) {
+		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+	} else
+		(cpu->init_uarts)(cfg, no);
+}
+#endif
+
+static int __init s3c_arch_init(void)
+{
+	int ret;
+
+	/* init is only needed for ATAGS based platforms */
+	if (!IS_ENABLED(CONFIG_ATAGS) ||
+	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+		return 0;
+
+	// do the correct init for cpu
+
+	if (cpu == NULL) {
+		/* Not needed when booting with device tree. */
+		if (of_have_populated_dt())
+			return 0;
+		panic("s3c_arch_init: NULL cpu\n");
+	}
+
+	ret = (cpu->init)();
+	if (ret != 0)
+		return ret;
+#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
+	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+#endif
+	return ret;
+}
+
+arch_initcall(s3c_arch_init);
diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
new file mode 100644
index 000000000..09f388d8f
--- /dev/null
+++ b/arch/arm/mach-s3c/iotiming-s3c2410.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2009 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include "map.h"
+#include "regs-clock.h"
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+
+#include "regs-mem-s3c24xx.h"
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing information
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static const unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifted down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configuration
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(*bt), GFP_KERNEL);
+		if (!bt)
+			return -ENOMEM;
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
diff --git a/arch/arm/mach-s3c/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
new file mode 100644
index 000000000..003f89c4d
--- /dev/null
+++ b/arch/arm/mach-s3c/iotiming-s3c2412.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2008 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2412/S3C2443 (PL093 based) IO timing support
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+
+#include "s3c2412.h"
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing information via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(*bt), GFP_KERNEL);
+		if (!bt)
+			return -ENOMEM;
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
new file mode 100644
index 000000000..55f41135a
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2004 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// S3C24XX - IRQ PM code
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include "cpu.h"
+#include "pm.h"
+#include "map-base.h"
+#include "map-s3c.h"
+
+#include "regs-irq.h"
+#include "regs-gpio.h"
+#include "pm-core.h"
+
+#include <asm/irq.h>
+
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
+{
+	unsigned long irqbit = 1 << data->hwirq;
+
+	if (!(s3c_irqwake_intallow & irqbit))
+		return -ENOENT;
+
+	pr_info("wake %s for hwirq %lu\n",
+		state ? "enabled" : "disabled", data->hwirq);
+
+	if (!state)
+		s3c_irqwake_intmask |= irqbit;
+	else
+		s3c_irqwake_intmask &= ~irqbit;
+
+	return 0;
+}
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2410_INTMSK),
+	SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+static int s3c24xx_irq_suspend(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+static void s3c24xx_irq_resume(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
+}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+#ifdef CONFIG_CPU_S3C2416
+static struct sleep_save s3c2416_irq_save[] = {
+	SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+static int s3c2416_irq_suspend(void)
+{
+	s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+
+	return 0;
+}
+
+static void s3c2416_irq_resume(void)
+{
+	s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+	.suspend	= s3c2416_irq_suspend,
+	.resume		= s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c/irq-pm-s3c64xx.c b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
new file mode 100644
index 000000000..4a1e935ba
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//      Ben Dooks <ben@simtec.co.uk>
+//      http://armlinux.simtec.co.uk/
+//
+// S3C64XX - Interrupt handling Power Management
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "map.h"
+
+#include "regs-gpio.h"
+#include "cpu.h"
+#include "pm.h"
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
+#define SERIAL_SAMSUNG_UARTS 0
+#else
+#define	SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static void s3c64xx_irq_pm_resume(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s3c64xx_irq_syscore_ops = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static __init int s3c64xx_syscore_init(void)
+{
+	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
+		return 0;
+
+	register_syscore_ops(&s3c64xx_irq_syscore_ops);
+
+	return 0;
+}
+
+core_initcall(s3c64xx_syscore_init);
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
new file mode 100644
index 000000000..84cf86376
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/stddef.h>
+#include <linux/export.h>
+#include <linux/spi/s3c24xx-fiq.h>
+
+EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
new file mode 100644
index 000000000..5d238d9a7
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* linux/drivers/spi/spi_s3c24xx_fiq.S
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - FIQ pseudo-DMA transfer code
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include "map.h"
+#include "regs-irq.h"
+
+#include <linux/spi/s3c24xx-fiq.h>
+
+#define S3C2410_SPTDAT           (0x10)
+#define S3C2410_SPRDAT           (0x14)
+
+	.text
+
+	@ entry to these routines is as follows, with the register names
+	@ defined in fiq.h so that they can be shared with the C files which
+	@ setup the calling registers.
+	@
+	@ fiq_rirq	The base of the IRQ registers to find S3C2410_SRCPND
+	@ fiq_rtmp	Temporary register to hold tx/rx data
+	@ fiq_rspi	The base of the SPI register block
+	@ fiq_rtx	The tx buffer pointer
+	@ fiq_rrx	The rx buffer pointer
+	@ fiq_rcount	The number of bytes to move
+
+	@ each entry starts with a word entry of how long it is
+	@ and an offset to the irq acknowledgment word
+
+ENTRY(s3c24xx_spi_fiq_rx)
+	.word	fiq_rx_end - fiq_rx_start
+	.word	fiq_rx_irq_ack - fiq_rx_start
+fiq_rx_start:
+	ldr	fiq_rtmp, fiq_rx_irq_ack
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
+	strb	fiq_rtmp, [ fiq_rrx ], #1
+
+	mov	fiq_rtmp, #0xff
+	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+	subs	fiq_rcount, fiq_rcount, #1
+	subsne	pc, lr, #4		@@ return, still have work to do
+
+	@@ set IRQ controller so that next op will trigger IRQ
+	mov	fiq_rtmp, #0
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
+	subs	pc, lr, #4
+
+fiq_rx_irq_ack:
+	.word	0
+fiq_rx_end:
+
+ENTRY(s3c24xx_spi_fiq_txrx)
+	.word	fiq_txrx_end - fiq_txrx_start
+	.word	fiq_txrx_irq_ack - fiq_txrx_start
+fiq_txrx_start:
+
+	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
+	strb	fiq_rtmp, [ fiq_rrx ], #1
+
+	ldr	fiq_rtmp, fiq_txrx_irq_ack
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+	ldrb	fiq_rtmp, [ fiq_rtx ], #1
+	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+	subs	fiq_rcount, fiq_rcount, #1
+	subsne	pc, lr, #4		@@ return, still have work to do
+
+	mov	fiq_rtmp, #0
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
+	subs	pc, lr, #4
+
+fiq_txrx_irq_ack:
+	.word	0
+
+fiq_txrx_end:
+
+ENTRY(s3c24xx_spi_fiq_tx)
+	.word	fiq_tx_end - fiq_tx_start
+	.word	fiq_tx_irq_ack - fiq_tx_start
+fiq_tx_start:
+	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
+
+	ldr	fiq_rtmp, fiq_tx_irq_ack
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+	ldrb	fiq_rtmp, [ fiq_rtx ], #1
+	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+	subs	fiq_rcount, fiq_rcount, #1
+	subsne	pc, lr, #4		@@ return, still have work to do
+
+	mov	fiq_rtmp, #0
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
+	subs	pc, lr, #4
+
+fiq_tx_irq_ack:
+	.word	0
+
+fiq_tx_end:
+
+	.end
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
new file mode 100644
index 000000000..088cc04b7
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -0,0 +1,1352 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/spi/s3c24xx.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqs.h"
+#include "regs-irq.h"
+#include "regs-gpio.h"
+
+#include "cpu.h"
+#include "regs-irqtype.h"
+#include "pm.h"
+#include "s3c24xx.h"
+
+#define S3C_IRQTYPE_NONE	0
+#define S3C_IRQTYPE_EINT	1
+#define S3C_IRQTYPE_EDGE	2
+#define S3C_IRQTYPE_LEVEL	3
+
+struct s3c_irq_data {
+	unsigned int type;
+	unsigned long offset;
+	unsigned long parent_irq;
+
+	/* data gets filled during init */
+	struct s3c_irq_intc *intc;
+	unsigned long sub_bits;
+	struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Structure holding the controller data
+ * @reg_pending		register holding pending irqs
+ * @reg_intpnd		special register intpnd in main intc
+ * @reg_mask		mask register
+ * @domain		irq_domain of the controller
+ * @parent		parent controller for ext and sub irqs
+ * @irqs		irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+	void __iomem		*reg_pending;
+	void __iomem		*reg_intpnd;
+	void __iomem		*reg_mask;
+	struct irq_domain	*domain;
+	struct s3c_irq_intc	*parent;
+	struct s3c_irq_data	*irqs;
+};
+
+/*
+ * Array holding pointers to the global controller structs
+ * [0] ... main_intc
+ * [1] ... sub_intc
+ * [2] ... main_intc2 on s3c2416
+ */
+static struct s3c_irq_intc *s3c_intc[3];
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+	struct s3c_irq_intc *intc = irq_data->intc;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *parent_data;
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = readl_relaxed(intc->reg_mask);
+	mask |= (1UL << irq_data->offset);
+	writel_relaxed(mask, intc->reg_mask);
+
+	if (parent_intc) {
+		parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+		/* check to see if we need to mask the parent IRQ
+		 * The parent_irq is always in main_intc, so the hwirq
+		 * for find_mapping does not need an offset in any case.
+		 */
+		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+			irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+			s3c_irq_mask(irq_get_irq_data(irqno));
+		}
+	}
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+	struct s3c_irq_intc *intc = irq_data->intc;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = readl_relaxed(intc->reg_mask);
+	mask &= ~(1UL << irq_data->offset);
+	writel_relaxed(mask, intc->reg_mask);
+
+	if (parent_intc) {
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		s3c_irq_unmask(irq_get_irq_data(irqno));
+	}
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+	struct s3c_irq_intc *intc = irq_data->intc;
+	unsigned long bitval = 1UL << irq_data->offset;
+
+	writel_relaxed(bitval, intc->reg_pending);
+	if (intc->reg_intpnd)
+		writel_relaxed(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irq_type(struct irq_data *data, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		irq_set_handler(data->irq, handle_edge_irq);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_set_handler(data->irq, handle_level_irq);
+		break;
+	default:
+		pr_err("No such irq type %d\n", type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+			       void __iomem *extint_reg,
+			       unsigned long gpcon_offset,
+			       unsigned long extint_offset,
+			       unsigned int type)
+{
+	unsigned long newvalue = 0, value;
+
+	/* Set the GPIO to external interrupt mode */
+	value = readl_relaxed(gpcon_reg);
+	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+	writel_relaxed(value, gpcon_reg);
+
+	/* Set the external interrupt to pointed trigger type */
+	switch (type)
+	{
+		case IRQ_TYPE_NONE:
+			pr_warn("No edge setting!\n");
+			break;
+
+		case IRQ_TYPE_EDGE_RISING:
+			newvalue = S3C2410_EXTINT_RISEEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_FALLING:
+			newvalue = S3C2410_EXTINT_FALLEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_BOTH:
+			newvalue = S3C2410_EXTINT_BOTHEDGE;
+			break;
+
+		case IRQ_TYPE_LEVEL_LOW:
+			newvalue = S3C2410_EXTINT_LOWLEV;
+			break;
+
+		case IRQ_TYPE_LEVEL_HIGH:
+			newvalue = S3C2410_EXTINT_HILEV;
+			break;
+
+		default:
+			pr_err("No such irq type %d\n", type);
+			return -EINVAL;
+	}
+
+	value = readl_relaxed(extint_reg);
+	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+	writel_relaxed(value, extint_reg);
+
+	return 0;
+}
+
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT1;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 8) * 4;
+	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT2;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 16) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if (data->hwirq <= 3) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+static struct irq_chip s3c_irq_chip = {
+	.name		= "s3c",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_type	= s3c_irq_type,
+	.irq_set_wake	= s3c_irq_wake
+};
+
+static struct irq_chip s3c_irq_level_chip = {
+	.name		= "s3c-level",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+	.irq_set_type	= s3c_irq_type,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+	.name		= "s3c-ext",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+	.irq_set_type	= s3c_irqext_type,
+	.irq_set_wake	= s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+	.name		= "s3c-ext0",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake,
+	.irq_set_type	= s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
+	struct s3c_irq_intc *intc = irq_data->intc;
+	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+	unsigned int n, offset;
+	unsigned long src, msk;
+
+	/* we're using individual domains for the non-dt case
+	 * and one big domain for the dt case where the subintc
+	 * starts at hwirq number 32.
+	 */
+	offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
+
+	chained_irq_enter(chip, desc);
+
+	src = readl_relaxed(sub_intc->reg_pending);
+	msk = readl_relaxed(sub_intc->reg_mask);
+
+	src &= ~msk;
+	src &= irq_data->sub_bits;
+
+	while (src) {
+		n = __ffs(src);
+		src &= ~(1 << n);
+		generic_handle_domain_irq(sub_intc->domain, offset + n);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
+				      struct pt_regs *regs, int intc_offset)
+{
+	int pnd;
+	int offset;
+
+	pnd = readl_relaxed(intc->reg_intpnd);
+	if (!pnd)
+		return false;
+
+	/* non-dt machines use individual domains */
+	if (!irq_domain_get_of_node(intc->domain))
+		intc_offset = 0;
+
+	/* We have a problem that the INTOFFSET register does not always
+	 * show one interrupt. Occasionally we get two interrupts through
+	 * the prioritiser, and this causes the INTOFFSET register to show
+	 * what looks like the logical-or of the two interrupt numbers.
+	 *
+	 * Thanks to Klaus, Shannon, et al for helping to debug this problem
+	 */
+	offset = readl_relaxed(intc->reg_intpnd + 4);
+
+	/* Find the bit manually, when the offset is wrong.
+	 * The pending register only ever contains the one bit of the next
+	 * interrupt to handle.
+	 */
+	if (!(pnd & (1 << offset)))
+		offset =  __ffs(pnd);
+
+	generic_handle_domain_irq(intc->domain, intc_offset + offset);
+	return true;
+}
+
+static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
+{
+	do {
+		/*
+		 * For platform based machines, neither ERR nor NULL can happen here.
+		 * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
+		 *
+		 *    s3c_intc[0] = s3c24xx_init_intc()
+		 *
+		 * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
+		 *
+		 * For DT machine, s3c_init_intc_of() could set the IRQ handler without
+		 * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
+		 * such code path, so again the s3c_intc[0] will have a valid pointer if
+		 * set_handle_irq() is called.
+		 *
+		 * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
+		 */
+		if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+			continue;
+
+		if (!IS_ERR_OR_NULL(s3c_intc[2]))
+			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
+				continue;
+
+		break;
+	} while (1);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @ack_ptr: pointer to a location for storing the bit mask
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ *
+ * returns the mask value for the register.
+ */
+int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return 0;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	if (ack_ptr)
+		*ack_ptr = intmod;
+	writel_relaxed(intmod, S3C2410_INTMOD);
+
+	return intmod;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	struct s3c_irq_intc *intc = h->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[hw];
+	struct s3c_irq_intc *parent_intc;
+	struct s3c_irq_data *parent_irq_data;
+	unsigned int irqno;
+
+	/* attach controller pointer to irq_data */
+	irq_data->intc = intc;
+	irq_data->offset = hw;
+
+	parent_intc = intc->parent;
+
+	/* set handler and flags */
+	switch (irq_data->type) {
+	case S3C_IRQTYPE_NONE:
+		return 0;
+	case S3C_IRQTYPE_EINT:
+		/* On the S3C2412, the EINT0to3 have a parent irq
+		 * but need the s3c_irq_eint0t4 chip
+		 */
+		if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
+			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_EDGE:
+		if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_LEVEL:
+		if (parent_intc)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_level_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_level_irq);
+		break;
+	default:
+		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+		return -EINVAL;
+	}
+
+	irq_set_chip_data(virq, irq_data);
+
+	if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
+		if (irq_data->parent_irq > 31) {
+			pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
+			       irq_data->parent_irq);
+			return -EINVAL;
+		}
+
+		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+		parent_irq_data->sub_intc = intc;
+		parent_irq_data->sub_bits |= (1UL << hw);
+
+		/* attach the demuxer to the parent irq */
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		if (!irqno) {
+			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+			       irq_data->parent_irq);
+			return -EINVAL;
+		}
+		irq_set_chained_handler(irqno, s3c_irq_demux);
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_irq_ops = {
+	.map = s3c24xx_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+	void __iomem *reg_source;
+	unsigned long pend;
+	unsigned long last;
+	int i;
+
+	/* if intpnd is set, read the next pending irq from there */
+	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = readl_relaxed(reg_source);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		writel_relaxed(pend, intc->reg_pending);
+		if (intc->reg_intpnd)
+			writel_relaxed(pend, intc->reg_intpnd);
+
+		pr_info("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
+	}
+}
+
+static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
+				       struct s3c_irq_data *irq_data,
+				       struct s3c_irq_intc *parent,
+				       unsigned long address)
+{
+	struct s3c_irq_intc *intc;
+	void __iomem *base = (void *)0xf6000000; /* static mapping */
+	int irq_num;
+	int irq_start;
+	int ret;
+
+	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+	if (!intc)
+		return ERR_PTR(-ENOMEM);
+
+	intc->irqs = irq_data;
+
+	if (parent)
+		intc->parent = parent;
+
+	/* select the correct data for the controller.
+	 * Need to hard code the irq num start and offset
+	 * to preserve the static mapping for now
+	 */
+	switch (address) {
+	case 0x4a000000:
+		pr_debug("irq: found main intc\n");
+		intc->reg_pending = base;
+		intc->reg_mask = base + 0x08;
+		intc->reg_intpnd = base + 0x10;
+		irq_num = 32;
+		irq_start = S3C2410_IRQ(0);
+		break;
+	case 0x4a000018:
+		pr_debug("irq: found subintc\n");
+		intc->reg_pending = base + 0x18;
+		intc->reg_mask = base + 0x1c;
+		irq_num = 29;
+		irq_start = S3C2410_IRQSUB(0);
+		break;
+	case 0x4a000040:
+		pr_debug("irq: found intc2\n");
+		intc->reg_pending = base + 0x40;
+		intc->reg_mask = base + 0x48;
+		intc->reg_intpnd = base + 0x50;
+		irq_num = 8;
+		irq_start = S3C2416_IRQ(0);
+		break;
+	case 0x560000a4:
+		pr_debug("irq: found eintc\n");
+		base = (void *)0xfd000000;
+
+		intc->reg_mask = base + 0xa4;
+		intc->reg_pending = base + 0xa8;
+		irq_num = 24;
+		irq_start = S3C2410_IRQ(32);
+		break;
+	default:
+		pr_err("irq: unsupported controller address\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* now that all the data is complete, init the irq-domain */
+	s3c24xx_clear_intc(intc);
+	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+					     0, &s3c24xx_irq_ops,
+					     intc);
+	if (!intc->domain) {
+		pr_err("irq: could not create irq-domain\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	set_handle_irq(s3c24xx_handle_irq);
+
+	return intc;
+
+err:
+	kfree(intc);
+	return ERR_PTR(ret);
+}
+
+static struct s3c_irq_data __maybe_unused init_eint[32] = {
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c_irq_data init_s3c2410base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2410subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c2410_init_irq(void)
+{
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
+					0x4a000000);
+	if (IS_ERR(s3c_intc[0])) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
+					s3c_intc[0], 0x4a000018);
+	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c_irq_data init_s3c2412base[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2412eint[32] = {
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_s3c2412subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_NONE, },
+	{ .type = S3C_IRQTYPE_NONE, },
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
+};
+
+void __init s3c2412_init_irq(void)
+{
+	pr_info("S3C2412: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
+					0x4a000000);
+	if (IS_ERR(s3c_intc[0])) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
+	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
+					s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_NONE, },
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+	pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
+					0x4a000000);
+	if (IS_ERR(s3c_intc[0])) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
+					s3c_intc[0], 0x4a000018);
+
+	s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
+					NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+static struct s3c_irq_data init_s3c2440base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2440subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2440_init_irq(void)
+{
+	pr_info("S3C2440: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
+					0x4a000000);
+	if (IS_ERR(s3c_intc[0])) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
+					s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+static struct s3c_irq_data init_s3c2442base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2442subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+};
+
+void __init s3c2442_init_irq(void)
+{
+	pr_info("S3C2442: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
+					0x4a000000);
+	if (IS_ERR(s3c_intc[0])) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
+					s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+	pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
+					0x4a000000);
+	if (IS_ERR(s3c_intc[0])) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
+					s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_OF
+static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	unsigned int ctrl_num = hw / 32;
+	unsigned int intc_hw = hw % 32;
+	struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
+
+	/* attach controller pointer to irq_data */
+	irq_data->intc = intc;
+	irq_data->offset = intc_hw;
+
+	if (!parent_intc)
+		irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
+	else
+		irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+					 handle_edge_irq);
+
+	irq_set_chip_data(virq, irq_data);
+
+	return 0;
+}
+
+/* Translate our of irq notation
+ * format: <ctrl_num ctrl_irq parent_irq type>
+ */
+static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
+			const u32 *intspec, unsigned int intsize,
+			irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+	struct s3c_irq_intc *intc;
+	struct s3c_irq_intc *parent_intc;
+	struct s3c_irq_data *irq_data;
+	struct s3c_irq_data *parent_irq_data;
+	int irqno;
+
+	if (WARN_ON(intsize < 4))
+		return -EINVAL;
+
+	if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
+		pr_err("controller number %d invalid\n", intspec[0]);
+		return -EINVAL;
+	}
+	intc = s3c_intc[intspec[0]];
+
+	*out_hwirq = intspec[0] * 32 + intspec[2];
+	*out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
+
+	parent_intc = intc->parent;
+	if (parent_intc) {
+		irq_data = &intc->irqs[intspec[2]];
+		irq_data->parent_irq = intspec[1];
+		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+		parent_irq_data->sub_intc = intc;
+		parent_irq_data->sub_bits |= (1UL << intspec[2]);
+
+		/* parent_intc is always s3c_intc[0], so no offset */
+		irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
+		if (irqno < 0) {
+			pr_err("irq: could not map parent interrupt\n");
+			return irqno;
+		}
+
+		irq_set_chained_handler(irqno, s3c_irq_demux);
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_irq_ops_of = {
+	.map = s3c24xx_irq_map_of,
+	.xlate = s3c24xx_irq_xlate_of,
+};
+
+struct s3c24xx_irq_of_ctrl {
+	char			*name;
+	unsigned long		offset;
+	struct s3c_irq_intc	**handle;
+	struct s3c_irq_intc	**parent;
+	struct irq_domain_ops	*ops;
+};
+
+static int __init s3c_init_intc_of(struct device_node *np,
+			struct device_node *interrupt_parent,
+			struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
+{
+	struct s3c_irq_intc *intc;
+	struct s3c24xx_irq_of_ctrl *ctrl;
+	struct irq_domain *domain;
+	void __iomem *reg_base;
+	int i;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("irq-s3c24xx: could not map irq registers\n");
+		return -EINVAL;
+	}
+
+	domain = irq_domain_add_linear(np, num_ctrl * 32,
+						     &s3c24xx_irq_ops_of, NULL);
+	if (!domain) {
+		pr_err("irq: could not create irq-domain\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_ctrl; i++) {
+		ctrl = &s3c_ctrl[i];
+
+		pr_debug("irq: found controller %s\n", ctrl->name);
+
+		intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+		if (!intc)
+			return -ENOMEM;
+
+		intc->domain = domain;
+		intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
+				     GFP_KERNEL);
+		if (!intc->irqs) {
+			kfree(intc);
+			return -ENOMEM;
+		}
+
+		if (ctrl->parent) {
+			intc->reg_pending = reg_base + ctrl->offset;
+			intc->reg_mask = reg_base + ctrl->offset + 0x4;
+
+			if (*(ctrl->parent)) {
+				intc->parent = *(ctrl->parent);
+			} else {
+				pr_warn("irq: parent of %s missing\n",
+					ctrl->name);
+				kfree(intc->irqs);
+				kfree(intc);
+				continue;
+			}
+		} else {
+			intc->reg_pending = reg_base + ctrl->offset;
+			intc->reg_mask = reg_base + ctrl->offset + 0x08;
+			intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
+		}
+
+		s3c24xx_clear_intc(intc);
+		s3c_intc[i] = intc;
+	}
+
+	set_handle_irq(s3c24xx_handle_irq);
+
+	return 0;
+}
+
+static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
+	{
+		.name = "intc",
+		.offset = 0,
+	}, {
+		.name = "subintc",
+		.offset = 0x18,
+		.parent = &s3c_intc[0],
+	}
+};
+
+static int __init s3c2410_init_intc_of(struct device_node *np,
+			struct device_node *interrupt_parent)
+{
+	return s3c_init_intc_of(np, interrupt_parent,
+				s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
+}
+IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
+
+static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
+	{
+		.name = "intc",
+		.offset = 0,
+	}, {
+		.name = "subintc",
+		.offset = 0x18,
+		.parent = &s3c_intc[0],
+	}, {
+		.name = "intc2",
+		.offset = 0x40,
+	}
+};
+
+static int __init s3c2416_init_intc_of(struct device_node *np,
+			struct device_node *interrupt_parent)
+{
+	return s3c_init_intc_of(np, interrupt_parent,
+				s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
+}
+IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
+#endif
diff --git a/arch/arm/mach-s3c/irq-uart-s3c64xx.h b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
new file mode 100644
index 000000000..78eccdce9
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ */
+
+struct s3c_uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+
diff --git a/arch/arm/mach-s3c/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h
new file mode 100644
index 000000000..fecbf7e44
--- /dev/null
+++ b/arch/arm/mach-s3c/irqs-s3c24xx.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT0_2412 S3C2410_IRQ(32)
+#define IRQ_EINT1_2412 S3C2410_IRQ(33)
+#define IRQ_EINT2_2412 S3C2410_IRQ(34)
+#define IRQ_EINT3_2412 S3C2410_IRQ(35)
+#define IRQ_EINT4      S3C2410_IRQ(36)	   /* 52 */
+#define IRQ_EINT5      S3C2410_IRQ(37)
+#define IRQ_EINT6      S3C2410_IRQ(38)
+#define IRQ_EINT7      S3C2410_IRQ(39)
+#define IRQ_EINT8      S3C2410_IRQ(40)
+#define IRQ_EINT9      S3C2410_IRQ(41)
+#define IRQ_EINT10     S3C2410_IRQ(42)
+#define IRQ_EINT11     S3C2410_IRQ(43)
+#define IRQ_EINT12     S3C2410_IRQ(44)
+#define IRQ_EINT13     S3C2410_IRQ(45)
+#define IRQ_EINT14     S3C2410_IRQ(46)
+#define IRQ_EINT15     S3C2410_IRQ(47)
+#define IRQ_EINT16     S3C2410_IRQ(48)
+#define IRQ_EINT17     S3C2410_IRQ(49)
+#define IRQ_EINT18     S3C2410_IRQ(50)
+#define IRQ_EINT19     S3C2410_IRQ(51)
+#define IRQ_EINT20     S3C2410_IRQ(52)	   /* 68 */
+#define IRQ_EINT21     S3C2410_IRQ(53)
+#define IRQ_EINT22     S3C2410_IRQ(54)
+#define IRQ_EINT23     S3C2410_IRQ(55)
+
+#define IRQ_EINT_BIT(x)	((x) - IRQ_EINT4 + 4)
+#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(56)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(57)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+58)
+
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 74 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 77 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 80 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
+
+#define NR_IRQS_S3C2410		(S3C2410_IRQSUB(10) + 1)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
+
+#define NR_IRQS_S3C2412		(S3C2410_IRQSUB(14) + 1)
+
+#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
+
+/* second interrupt-register of s3c2416/s3c2450 */
+
+#define S3C2416_IRQ(x)		S3C2410_IRQ((x) + 58 + 29)
+#define IRQ_S3C2416_2D		S3C2416_IRQ(0)
+#define IRQ_S3C2416_IIC1	S3C2416_IRQ(1)
+#define IRQ_S3C2416_RESERVED2	S3C2416_IRQ(2)
+#define IRQ_S3C2416_RESERVED3	S3C2416_IRQ(3)
+#define IRQ_S3C2416_PCM0	S3C2416_IRQ(4)
+#define IRQ_S3C2416_PCM1	S3C2416_IRQ(5)
+#define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
+#define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
+
+#define NR_IRQS_S3C2416		(S3C2416_IRQ(7) + 1)
+
+/* extra irqs for s3c2440/s3c2442 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+
+#define NR_IRQS_S3C2442		(S3C2410_IRQSUB(12) + 1)
+
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
+
+#define NR_IRQS_S3C2440		(S3C2410_IRQSUB(14) + 1)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
+
+#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#define NR_IRQS_S3C2443		(S3C2410_IRQSUB(28) + 1)
+
+/* compatibility define. */
+#define IRQ_UART3		IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
+
+#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
+
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START		IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c/irqs-s3c64xx.h b/arch/arm/mach-s3c/irqs-s3c64xx.h
new file mode 100644
index 000000000..c244e480e
--- /dev/null
+++ b/arch/arm/mach-s3c/irqs-s3c64xx.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - IRQ support
+ */
+
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET	(32)
+
+#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1		IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP3_NR	(5)
+#define IRQ_EINT_GROUP4_NR	(14)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+#define IRQ_EINT_GROUP7_NR	(16)
+#define IRQ_EINT_GROUP8_NR	(15)
+#define IRQ_EINT_GROUP9_NR	(9)
+
+#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Some boards have their own IRQs behind this */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS	IRQ_BOARD_START
+
+/* Compatibility */
+
+#define IRQ_ONENAND	IRQ_ONENAND0
+#define IRQ_I2S0	IRQ_S3C6410_IIS
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
+
diff --git a/arch/arm/mach-s3c/irqs.h b/arch/arm/mach-s3c/irqs.h
new file mode 100644
index 000000000..0bff1c1c8
--- /dev/null
+++ b/arch/arm/mach-s3c/irqs.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "irqs-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "irqs-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/keypad.h b/arch/arm/mach-s3c/keypad.h
new file mode 100644
index 000000000..9754b9a29
--- /dev/null
+++ b/arch/arm/mach-s3c/keypad.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/samsung-keypad.h>
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
new file mode 100644
index 000000000..f85e5885e
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-amlm5900.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006 American Microsystems Limited
+//	David Anders <danders@amltd.com>
+//
+// @History:
+// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "devs.h"
+#include "cpu.h"
+#include "gpio-cfg.h"
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include "s3c24xx.h"
+
+static struct resource amlm5900_nor_resource =
+			DEFINE_RES_MEM(0x00000000, SZ_16M);
+
+static struct mtd_partition amlm5900_mtd_partitions[] = {
+	{
+		.name		= "System",
+		.size		= 0x240000,
+		.offset		= 0,
+		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "Kernel",
+		.size		= 0x100000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "Ramdisk",
+		.size		= 0x300000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "JFFS2",
+		.size		= 0x9A0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "Settings",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data amlm5900_flash_data = {
+	.width		= 2,
+	.parts		= amlm5900_mtd_partitions,
+	.nr_parts	= ARRAY_SIZE(amlm5900_mtd_partitions),
+};
+
+static struct platform_device amlm5900_device_nor = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+			.platform_data = &amlm5900_flash_data,
+		},
+	.num_resources	= 1,
+	.resource	= &amlm5900_nor_resource,
+};
+
+static struct map_desc amlm5900_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device *amlm5900_devices[] __initdata = {
+#ifdef CONFIG_FB_S3C2410
+	&s3c_device_lcd,
+#endif
+	&s3c_device_adc,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_ohci,
+ 	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+        &s3c_device_sdi,
+	&amlm5900_device_nor,
+};
+
+static void __init amlm5900_map_io(void)
+{
+	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
+	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+#ifdef CONFIG_FB_S3C2410
+static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
+	.width		= 160,
+	.height		= 160,
+
+	.type		= S3C2410_LCDCON1_STN4,
+
+	.pixclock	= 680000, /* HCLK = 100MHz */
+	.xres		= 160,
+	.yres		= 160,
+	.bpp		= 4,
+	.left_margin	= 1 << (4 + 3),
+	.right_margin	= 8 << 3,
+	.hsync_len	= 48,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+
+	.lcdcon5	= 0x00000001,
+};
+
+static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
+
+	.displays = &amlm5900_lcd_info,
+	.num_displays = 1,
+	.default_display = 0,
+
+	.gpccon =	0xaaaaaaaa,
+	.gpccon_mask =	0xffffffff,
+	.gpccon_reg =	S3C2410_GPCCON,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
+
+	.gpdcon =	0xaaaaaaaa,
+	.gpdcon_mask =	0xffffffff,
+	.gpdcon_reg =	S3C2410_GPDCON,
+	.gpdup =	0x0000ffff,
+	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
+};
+#endif
+
+static irqreturn_t
+amlm5900_wake_interrupt(int irq, void *ignored)
+{
+	return IRQ_HANDLED;
+}
+
+static void amlm5900_init_pm(void)
+{
+	int ret = 0;
+
+	ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
+				IRQF_TRIGGER_RISING | IRQF_SHARED,
+				"amlm5900_wakeup", &amlm5900_wake_interrupt);
+	if (ret != 0) {
+		printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
+	} else {
+		enable_irq_wake(IRQ_EINT9);
+		/* configure the suspend/resume status pin */
+		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
+	}
+}
+static void __init amlm5900_init(void)
+{
+	amlm5900_init_pm();
+#ifdef CONFIG_FB_S3C2410
+	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
+#endif
+	s3c_i2c0_set_platdata(NULL);
+	gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
+	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
+}
+
+MACHINE_START(AML_M5900, "AML_M5900")
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= amlm5900_map_io,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.init_irq	= s3c2410_init_irq,
+	.init_machine	= amlm5900_init,
+	.init_time	= amlm5900_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
new file mode 100644
index 000000000..4536f3e66
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-anubis.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2003-2009 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include <net/ax88796.h>
+
+#include "devs.h"
+#include "cpu.h"
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include "anubis.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+  /* ISA IO areas */
+
+  {
+	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	.pfn		= __phys_to_pfn(0x0),
+	.length		= SZ_4M,
+	.type		= MT_DEVICE,
+  },
+
+  /* we could possibly compress the next set down into a set of smaller tables
+   * pagetables, but that would mean using an L2 section, and it still means
+   * we cannot actually feed the same register to an LDR due to 16K spacing
+   */
+
+  /* CPLD control registers */
+
+  {
+	.virtual	= (u32)ANUBIS_VA_CTRL1,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+  }, {
+	.virtual	= (u32)ANUBIS_VA_IDREG,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+  },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+	[1] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_128K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_128K,
+		.offset	= SZ_128K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
+	[1] = {
+		.name		= "External",
+		.nr_chips	= 1,
+		.nr_map		= external_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+	[0] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(ANUBIS_VA_CTRL1);
+	tmp &= ~ANUBIS_CTRL1_NANDSEL;
+	tmp |= slot;
+
+	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
+	.sets		= anubis_nand_sets,
+	.select_chip	= anubis_nand_select,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* IDE channels */
+
+static struct pata_platform_info anubis_ide_platdata = {
+	.ioport_shift	= 5,
+};
+
+static struct resource anubis_ide0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
+	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
+	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
+};
+
+static struct platform_device anubis_device_ide0 = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
+	.resource	= anubis_ide0_resource,
+	.dev	= {
+		.platform_data = &anubis_ide_platdata,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+static struct resource anubis_ide1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
+	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
+	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
+};
+
+static struct platform_device anubis_device_ide1 = {
+	.name		= "pata_platform",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
+	.resource	= anubis_ide1_resource,
+	.dev	= {
+		.platform_data = &anubis_ide_platdata,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2,
+	.dcr_val	= 0x48,
+	.rcr_val	= 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
+	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
+};
+
+static struct platform_device anubis_device_asix = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
+	.resource	= anubis_asix_resource,
+	.dev		= {
+		.platform_data = &anubis_asix_platdata,
+	}
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
+	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
+	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x3F000000,		/* 24bit panel */
+		.mask	= 0x0,
+	},
+	.misc_timing	= {
+		.set	= 0x010100,		/* SDRAM timing */
+		.mask	= 0x1F1F00,
+	},
+	.misc_control	= {
+		.set	= SM501_MISC_PNL_24BIT,
+		.mask	= 0,
+	},
+
+	.devices	= SM501_USE_GPIO,
+
+	/* set the SDRAM and bus clocks */
+	.mclk		= 72 * MHZ,
+	.m1xclk		= 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+	[0] = {
+		.bus_num	= 1,
+		.pin_scl	= 44,
+		.pin_sda	= 45,
+	},
+	[1] = {
+		.bus_num	= 2,
+		.pin_scl	= 40,
+		.pin_sda	= 41,
+	},
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+	.init		= &anubis_sm501_initdata,
+	.gpio_base	= -1,
+	.gpio_i2c	= anubis_sm501_gpio_i2c,
+	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+	.name		= "sm501",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
+	.resource	= anubis_sm501_resource,
+	.dev		= {
+		.platform_data = &anubis_sm501_platdata,
+	},
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_adc,
+	&s3c_device_i2c0,
+ 	&s3c_device_rtc,
+	&s3c_device_nand,
+	&anubis_device_ide0,
+	&anubis_device_ide1,
+	&anubis_device_asix,
+	&anubis_device_sm501,
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tps65011", 0x48),
+		.irq	= IRQ_EINT20,
+	}
+};
+
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
+static void __init anubis_map_io(void)
+{
+	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+
+	/* check for the newer revision boards with large page nand */
+
+	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+	} else {
+		/* ensure that the GPIO is setup */
+		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPA(0));
+	}
+}
+
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init anubis_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
+	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+	i2c_register_board_info(0, anubis_i2c_devs,
+				ARRAY_SIZE(anubis_i2c_devs));
+}
+
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= anubis_map_io,
+	.init_machine	= anubis_init,
+	.init_irq	= s3c2440_init_irq,
+	.init_time	= anubis_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
new file mode 100644
index 000000000..b67eae43e
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-anw6410.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+// Copyright 2009 Kwangwoo Lee
+//	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "fb.h"
+
+#include "devs.h"
+#include "cpu.h"
+#include "irqs.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode anw6410_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 13,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.vtiming	= &anw6410_lcd_timing,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
+					| IRQF_TRIGGER_HIGH),
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
new file mode 100644
index 000000000..743403d87
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-at2440evb.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+//      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+//      and modifications by SBZ <sbz@spgui.org> and
+//      Weibing <http://weibing.blogbus.com>
+//
+// For product information, visit http://www.arm.com/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio/machine.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include "devs.h"
+#include "cpu.h"
+#include <linux/platform_data/mmc-s3cmci.h>
+
+#include "s3c24xx.h"
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+	/* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_256K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "Kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "Root",
+		.offset	= SZ_256K + SZ_2M,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(at2440evb_default_nand_part),
+		.partitions	= at2440evb_default_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
+	.sets		= at2440evb_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHEDGE),
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(at2440evb_dm9k_resource),
+	.resource	= at2440evb_dm9k_resource,
+	.dev		= {
+		.platform_data	= &at2440evb_dm9k_pdata,
+	},
+};
+
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
+	.set_power	= s3c24xx_mci_def_set_power,
+};
+
+static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPG(10) */
+		GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+			  S3C2410_LCDCON5_INVVLINE |
+			  S3C2410_LCDCON5_INVVFRAME |
+			  S3C2410_LCDCON5_PWREN |
+			  S3C2410_LCDCON5_HWSWP,
+
+	.type		= S3C2410_LCDCON1_TFT,
+
+	.width		= 800,
+	.height		= 480,
+
+	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
+	.xres		= 800,
+	.yres		= 480,
+	.bpp		= 16,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 32,
+	.lower_margin	= 11,
+	.vsync_len	= 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+	.displays	= &at2440evb_lcd_cfg,
+	.num_displays	= 1,
+	.default_display = 0,
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_adc,
+	&s3c_device_i2c0,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_lcd,
+	&at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init at2440evb_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	s3c24xx_timer_init();
+}
+
+static void __init at2440evb_init(void)
+{
+	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
+	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
+	s3c_nand_set_platdata(&at2440evb_nand_info);
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= at2440evb_map_io,
+	.init_machine	= at2440evb_init,
+	.init_irq	= s3c2440_init_irq,
+	.init_time	= at2440evb_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
new file mode 100644
index 000000000..a33ceab81
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-bast.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2003-2008 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/dm9000.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <net/ax88796.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "devs.h"
+#include "gpio-cfg.h"
+
+#include "bast.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
+
+/* macros for virtual address mods for the io space entries */
+#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
+#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
+#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
+#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
+
+/* macros to modify the physical addresses for io space */
+
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
+
+static struct map_desc bast_iodesc[] __initdata = {
+  /* ISA IO areas */
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= PA_CS2(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
+  /* bast CPLD control registers, and external interrupt controls */
+  {
+	  .virtual	= (u32)BAST_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL1),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL2),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL3,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL3),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL4,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL4),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
+  /* PC104 IRQ mux */
+  {
+	  .virtual	= (u32)BAST_VA_PC104_IRQREQ,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQREQ),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_PC104_IRQRAW,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQRAW),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_PC104_IRQMASK,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQMASK),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
+
+  /* peripheral space... one for each of fast/slow/byte/16bit */
+  /* note, ide is only decoded in word space, even though some registers
+   * are only 8bit */
+
+  /* slow, byte */
+  { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
+  { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
+  { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
+
+  /* slow, word */
+  { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
+  { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
+  { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
+
+  /* fast, byte */
+  { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
+  { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
+  { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
+
+  /* fast, word */
+  { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
+  { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
+  { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* port 2 is not actually used */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* NAND Flash on BAST board */
+
+#ifdef CONFIG_PM
+static int bast_pm_suspend(void)
+{
+	/* ensure that an nRESET is not generated on resume. */
+	gpio_direction_output(S3C2410_GPA(21), 1);
+	return 0;
+}
+
+static void bast_pm_resume(void)
+{
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define bast_pm_suspend NULL
+#define bast_pm_resume NULL
+#endif
+
+static struct syscore_ops bast_pm_syscore_ops = {
+	.suspend	= bast_pm_suspend,
+	.resume		= bast_pm_resume,
+};
+
+static int smartmedia_map[] = { 0 };
+static int chip0_map[] = { 1 };
+static int chip1_map[] = { 2 };
+static int chip2_map[] = { 3 };
+
+static struct mtd_partition __initdata bast_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user",
+		.offset	= SZ_4M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the bast has 4 selectable slots for nand-flash, the three
+ * on-board chip areas, as well as the external SmartMedia
+ * slot.
+ *
+ * Note, there is no current hot-plug support for the SmartMedia
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
+	[0] = {
+		.name		= "SmartMedia",
+		.nr_chips	= 1,
+		.nr_map		= smartmedia_map,
+		.options        = NAND_SCAN_SILENT_NODEV,
+		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
+		.partitions	= bast_default_nand_part,
+	},
+	[1] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
+		.partitions	= bast_default_nand_part,
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.options        = NAND_SCAN_SILENT_NODEV,
+		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
+		.partitions	= bast_default_nand_part,
+	},
+	[3] = {
+		.name		= "chip2",
+		.nr_chips	= 1,
+		.nr_map		= chip2_map,
+		.options        = NAND_SCAN_SILENT_NODEV,
+		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
+		.partitions	= bast_default_nand_part,
+	}
+};
+
+static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(BAST_VA_CTRL2);
+	tmp &= BAST_CPLD_CTLR2_IDERST;
+	tmp |= slot;
+	tmp |= BAST_CPLD_CTRL2_WNAND;
+
+	pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
+
+	__raw_writeb(tmp, BAST_VA_CTRL2);
+}
+
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
+	.tacls		= 30,
+	.twrph0		= 60,
+	.twrph1		= 60,
+	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
+	.sets		= bast_nand_sets,
+	.select_chip	= bast_nand_select,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* DM9000 */
+
+static struct resource bast_dm9k_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
+	[2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+/* for the moment we limit ourselves to 16bit IO until some
+ * better IO routines can be written and tested
+*/
+
+static struct dm9000_plat_data bast_dm9k_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device bast_device_dm9k = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(bast_dm9k_resource),
+	.resource	= bast_dm9k_resource,
+	.dev		= {
+		.platform_data = &bast_dm9k_platdata,
+	}
+};
+
+/* serial devices */
+
+#define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
+#define SERIAL_CLK   (1843200)
+
+static struct plat_serial8250_port bast_sio_data[] = {
+	[0] = {
+		.mapbase	= SERIAL_BASE + 0x2f8,
+		.irq		= BAST_IRQ_PCSERIAL1,
+		.flags		= SERIAL_FLAGS,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= SERIAL_CLK,
+	},
+	[1] = {
+		.mapbase	= SERIAL_BASE + 0x3f8,
+		.irq		= BAST_IRQ_PCSERIAL2,
+		.flags		= SERIAL_FLAGS,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= SERIAL_CLK,
+	},
+	{ }
+};
+
+static struct platform_device bast_sio = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= &bast_sio_data,
+	},
+};
+
+/* we have devices on the bus which cannot work much over the
+ * standard 100KHz i2c bus frequency
+*/
+
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data bast_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2,
+	.dcr_val	= 0x48,
+	.rcr_val	= 0x40,
+};
+
+static struct resource bast_asix_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
+};
+
+static struct platform_device bast_device_asix = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(bast_asix_resource),
+	.resource	= bast_asix_resource,
+	.dev		= {
+		.platform_data = &bast_asix_platdata
+	}
+};
+
+/* Asix AX88796 10/100 ethernet controller parallel port */
+
+static struct resource bast_asixpp_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
+					0x30 * 0x20),
+};
+
+static struct platform_device bast_device_axpp = {
+	.name		= "ax88796-pp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(bast_asixpp_resource),
+	.resource	= bast_asixpp_resource,
+};
+
+/* LCD/VGA controller */
+
+static struct s3c2410fb_display __initdata bast_lcd_info[] = {
+	{
+		.type		= S3C2410_LCDCON1_TFT,
+		.width		= 640,
+		.height		= 480,
+
+		.pixclock	= 33333,
+		.xres		= 640,
+		.yres		= 480,
+		.bpp		= 4,
+		.left_margin	= 40,
+		.right_margin	= 20,
+		.hsync_len	= 88,
+		.upper_margin	= 30,
+		.lower_margin	= 32,
+		.vsync_len	= 3,
+
+		.lcdcon5	= 0x00014b02,
+	},
+	{
+		.type		= S3C2410_LCDCON1_TFT,
+		.width		= 640,
+		.height		= 480,
+
+		.pixclock	= 33333,
+		.xres		= 640,
+		.yres		= 480,
+		.bpp		= 8,
+		.left_margin	= 40,
+		.right_margin	= 20,
+		.hsync_len	= 88,
+		.upper_margin	= 30,
+		.lower_margin	= 32,
+		.vsync_len	= 3,
+
+		.lcdcon5	= 0x00014b02,
+	},
+	{
+		.type		= S3C2410_LCDCON1_TFT,
+		.width		= 640,
+		.height		= 480,
+
+		.pixclock	= 33333,
+		.xres		= 640,
+		.yres		= 480,
+		.bpp		= 16,
+		.left_margin	= 40,
+		.right_margin	= 20,
+		.hsync_len	= 88,
+		.upper_margin	= 30,
+		.lower_margin	= 32,
+		.vsync_len	= 3,
+
+		.lcdcon5	= 0x00014b02,
+	},
+};
+
+/* LCD/VGA controller */
+
+static struct s3c2410fb_mach_info __initdata bast_fb_info = {
+
+	.displays = bast_lcd_info,
+	.num_displays = ARRAY_SIZE(bast_lcd_info),
+	.default_display = 1,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info bast_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
+		I2C_BOARD_INFO("simtec-pmu", 0x6b),
+	}, {
+		I2C_BOARD_INFO("ch7013", 0x75),
+	},
+};
+
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+	/* LCD contrast (0-6.6V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-contrast",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* LED current feedback */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "led-feedback",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+	/* LCD feedback (0-6.6V) */
+	.in[2] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-feedback",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* Vcore (1.8-2.0V), Vref 3.3V  */
+	.in[3] = &(struct s3c_hwmon_chcfg) {
+		.name		= "vcore",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+};
+
+/* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
+
+static struct platform_device *bast_devices[] __initdata = {
+	&s3c2410_device_dclk,
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+ 	&s3c_device_rtc,
+	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_hwmon,
+	&bast_device_dm9k,
+	&bast_device_asix,
+	&bast_device_axpp,
+	&bast_sio,
+};
+
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+	.refresh	= 7800, /* 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+};
+
+static void __init bast_map_io(void)
+{
+	s3c_hwmon_set_platdata(&bast_hwmon_info);
+
+	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
+	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init bast_init(void)
+{
+	register_syscore_ops(&bast_pm_syscore_ops);
+
+	s3c_i2c0_set_platdata(&bast_i2c_info);
+	s3c_nand_set_platdata(&bast_nand_info);
+	s3c24xx_fb_set_platdata(&bast_fb_info);
+	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
+
+	i2c_register_board_info(0, bast_i2c_devs,
+				ARRAY_SIZE(bast_i2c_devs));
+
+	usb_simtec_init();
+	nor_simtec_init();
+	simtec_audio_add(NULL, true, &bast_audio);
+
+	WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
+	
+	s3c_cpufreq_setboard(&bast_cpufreq);
+}
+
+MACHINE_START(BAST, "Simtec-BAST")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= bast_map_io,
+	.init_irq	= s3c2410_init_irq,
+	.init_machine	= bast_init,
+	.init_time	= bast_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
new file mode 100644
index 000000000..4edde13b8
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Speyside modules for Cragganmore - board data probing
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//	Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/arizona/pdata.h>
+
+#include <linux/regulator/machine.h>
+
+#include <sound/wm0010.h>
+#include <sound/wm2200.h>
+#include <sound/wm5100.h>
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <linux/platform_data/spi-s3c64xx.h>
+
+#include "cpu.h"
+#include "irqs.h"
+
+#include "crag6410.h"
+
+static struct wm0010_pdata wm0010_pdata = {
+	.gpio_reset = S3C64XX_GPN(6),
+	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+};
+
+static struct spi_board_info wm1253_devs[] = {
+	[0] = {
+		.modalias	= "wm0010",
+		.max_speed_hz	= 26 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+		.irq		= S3C_EINT(4),
+		.platform_data = &wm0010_pdata,
+	},
+};
+
+static struct spi_board_info balblair_devs[] = {
+	[0] = {
+		.modalias	= "wm0010",
+		.max_speed_hz	= 26 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+		.irq		= S3C_EINT(4),
+		.platform_data = &wm0010_pdata,
+	},
+};
+
+static struct wm5100_pdata wm5100_pdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.irq_flags = IRQF_TRIGGER_HIGH,
+	.gpio_base = CODEC_GPIO_BASE,
+
+	.in_mode = {
+		WM5100_IN_DIFF,
+		WM5100_IN_DIFF,
+		WM5100_IN_DIFF,
+		WM5100_IN_SE,
+	},
+
+	.hp_pol = CODEC_GPIO_BASE + 3,
+	.jack_modes = {
+		{ WM5100_MICDET_MICBIAS3, 0, 0 },
+		{ WM5100_MICDET_MICBIAS2, 1, 1 },
+	},
+
+	.gpio_defaults = {
+		0,
+		0,
+		0,
+		0,
+		0x2, /* IRQ: CMOS output */
+		0x3, /* CLKOUT: CMOS output */
+	},
+};
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8996_DIFFERRENTIAL_1,
+	.inr_mode = WM8996_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8996_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.in4_dc_measure = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+	{ I2C_BOARD_INFO("wm8996", 0x1a),
+	  .platform_data = &wm8996_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+	{ I2C_BOARD_INFO("wm5100", 0x1a),
+	  .platform_data = &wm5100_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+static struct regulator_init_data wm8994_ldo1 = {
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data wm8994_ldo2 = {
+	.supply_regulator = "WALLVDD",
+};
+
+static struct wm8994_pdata wm8994_pdata = {
+	.gpio_base = CODEC_GPIO_BASE,
+	.micb2_delay = 150,
+	.gpio_defaults = {
+		0x3,          /* IRQ out, active high, CMOS */
+	},
+	.ldo = {
+		 { .init_data = &wm8994_ldo1, },
+		 { .init_data = &wm8994_ldo2, },
+	},
+};
+
+static const struct i2c_board_info wm1277_devs[] = {
+	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
+	  .platform_data = &wm8994_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	  .dev_name = "wm8958",
+	},
+};
+
+static struct gpiod_lookup_table wm8994_gpiod_table = {
+	.dev_id = "i2c-wm8958", /* I2C device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 6,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPION", 4,
+			    "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct arizona_pdata wm5102_reva_pdata = {
+	.gpio_base = CODEC_GPIO_BASE,
+	.irq_flags = IRQF_TRIGGER_HIGH,
+	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
+	.micd_rate = 6,
+	.gpio_defaults = {
+		[2] = 0x10000, /* AIF3TXLRCLK */
+		[3] = 0x4,     /* OPCLK */
+	},
+};
+
+static struct spi_board_info wm5102_reva_spi_devs[] = {
+	[0] = {
+		.modalias	= "wm5102",
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_0,
+		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
+				  WM831X_IRQ_GPIO_2,
+		.platform_data = &wm5102_reva_pdata,
+	},
+};
+
+static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
+	.dev_id = "spi0.1", /* SPI device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldoena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct arizona_pdata wm5102_pdata = {
+	.gpio_base = CODEC_GPIO_BASE,
+	.irq_flags = IRQF_TRIGGER_HIGH,
+	.micd_pol_gpio = CODEC_GPIO_BASE + 2,
+	.gpio_defaults = {
+		[2] = 0x10000, /* AIF3TXLRCLK */
+		[3] = 0x4,     /* OPCLK */
+	},
+};
+
+static struct spi_board_info wm5102_spi_devs[] = {
+	[0] = {
+		.modalias	= "wm5102",
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_0,
+		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
+				  WM831X_IRQ_GPIO_2,
+		.platform_data = &wm5102_pdata,
+	},
+};
+
+static struct gpiod_lookup_table wm5102_gpiod_table = {
+	.dev_id = "spi0.1", /* SPI device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct spi_board_info wm5110_spi_devs[] = {
+	[0] = {
+		.modalias	= "wm5110",
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_0,
+		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
+				  WM831X_IRQ_GPIO_2,
+		.platform_data = &wm5102_reva_pdata,
+	},
+};
+
+static const struct i2c_board_info wm6230_i2c_devs[] = {
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static struct wm2200_pdata wm2200_pdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_defaults = {
+		[2] = 0x0005,  /* GPIO3 24.576MHz output clock */
+	},
+};
+
+static const struct i2c_board_info wm2200_i2c[] = {
+	{ I2C_BOARD_INFO("wm2200", 0x3a),
+	  .platform_data = &wm2200_pdata, },
+};
+
+static const struct {
+	u8 id;
+	u8 rev;
+	const char *name;
+	const struct i2c_board_info *i2c_devs;
+	int num_i2c_devs;
+	const struct spi_board_info *spi_devs;
+	int num_spi_devs;
+
+	struct gpiod_lookup_table *gpiod_table;
+} gf_mods[] = {
+	{ .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
+	{ .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
+	{ .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
+	{ .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
+	{ .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
+	  .spi_devs = wm5110_spi_devs,
+	  .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
+	{ .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
+	{ .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
+	{ .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
+	{ .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
+	{ .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
+	{ .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
+	{ .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
+	  .i2c_devs = wm6230_i2c_devs,
+	  .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
+	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
+	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
+	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
+	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
+	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
+	  .spi_devs = balblair_devs,
+	  .num_spi_devs = ARRAY_SIZE(balblair_devs) },
+	{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
+	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+	{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
+	{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
+	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
+	  .gpiod_table = &wm8994_gpiod_table },
+	{ .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
+	  .spi_devs = wm5102_reva_spi_devs,
+	  .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs),
+	  .gpiod_table = &wm5102_reva_gpiod_table },
+	{ .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
+	  .spi_devs = wm5102_spi_devs,
+	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
+	  .gpiod_table = &wm5102_gpiod_table },
+	{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
+	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+};
+
+static int wlf_gf_module_probe(struct i2c_client *i2c)
+{
+	int ret, i, j, id, rev;
+
+	ret = i2c_smbus_read_byte_data(i2c, 0);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+		return ret;
+	}
+
+	id = (ret & 0xfe) >> 2;
+	rev = ret & 0x3;
+	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+		if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
+					    rev == gf_mods[i].rev))
+			break;
+
+	gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
+	gpiod_add_lookup_table(&wm5102_gpiod_table);
+	gpiod_add_lookup_table(&wm8994_gpiod_table);
+
+	if (i < ARRAY_SIZE(gf_mods)) {
+		dev_info(&i2c->dev, "%s revision %d\n",
+			 gf_mods[i].name, rev + 1);
+
+		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+			if (IS_ERR(i2c_new_client_device(i2c->adapter,
+							 &(gf_mods[i].i2c_devs[j]))))
+				dev_err(&i2c->dev, "Failed to register\n");
+		}
+
+		spi_register_board_info(gf_mods[i].spi_devs,
+					gf_mods[i].num_spi_devs);
+
+		if (gf_mods[i].gpiod_table)
+			gpiod_add_lookup_table(gf_mods[i].gpiod_table);
+	} else {
+		dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
+			 id, rev + 1);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+	{ "wlf-gf-module", 0 },
+	{ }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+	.driver = {
+		.name = "wlf-gf-module"
+	},
+	.probe_new = wlf_gf_module_probe,
+	.id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+	if (!soc_is_s3c64xx())
+		return 0;
+
+	return i2c_add_driver(&wlf_gf_module_driver);
+}
+device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
new file mode 100644
index 000000000..9a45474d1
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -0,0 +1,890 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//	Mark Brown <broonie@opensource.wolfsonmicro.com>
+//
+// Copyright 2011 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio/driver.h>
+#include <linux/spi/spi.h>
+
+#include <linux/platform_data/pca953x.h>
+#include <linux/platform_data/s3c-hsotg.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm1250-ev1.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/samsung_fimd.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "irqs.h"
+
+#include "fb.h"
+#include "sdhci.h"
+#include "gpio-cfg.h"
+#include <linux/platform_data/spi-s3c64xx.h>
+
+#include "keypad.h"
+#include "devs.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-adc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "pm.h"
+
+#include "s3c64xx.h"
+#include "crag6410.h"
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+};
+
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+	.max_brightness	= 1000,
+	.dft_brightness	= 600,
+};
+
+static struct platform_device crag6410_backlight_device = {
+	.name		= "pwm-backlight",
+	.id		= -1,
+	.dev		= {
+		.parent	= &samsung_device_pwm.dev,
+		.platform_data = &crag6410_backlight_data,
+	},
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	pr_debug("%s: setting power %d\n", __func__, power);
+
+	if (power) {
+		gpio_set_value(S3C64XX_GPB(0), 1);
+		msleep(1);
+		s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+	} else {
+		gpio_direction_output(S3C64XX_GPF(14), 0);
+		gpio_set_value(S3C64XX_GPB(0), 0);
+	}
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.id			= -1,
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &(struct plat_lcd_data) {
+		.set_power	= crag6410_lcd_power_set,
+	},
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 640,
+	.yres		= 480,
+	.virtual_y	= 480 * 2,
+	.virtual_x	= 640,
+};
+
+static struct fb_videomode crag6410_lcd_timing = {
+	.left_margin	= 150,
+	.right_margin	= 80,
+	.upper_margin	= 40,
+	.lower_margin	= 5,
+	.hsync_len	= 40,
+	.vsync_len	= 5,
+	.xres		= 640,
+	.yres		= 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.vtiming	= &crag6410_lcd_timing,
+	.win[0]		= &crag6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 0, KEY_VOLUMEUP),
+	KEY(0, 1, KEY_HOME),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HELP),
+	KEY(0, 4, KEY_MENU),
+	KEY(0, 5, KEY_MEDIA),
+	KEY(1, 0, 232),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_LEFT),
+	KEY(1, 3, KEY_UP),
+	KEY(1, 4, KEY_RIGHT),
+	KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data = {
+	.keymap		= crag6410_keymap,
+	.keymap_size	= ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data = {
+	.keymap_data	= &crag6410_keymap_data,
+	.rows		= 2,
+	.cols		= 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+	[0] = {
+		.code	= KEY_SUSPEND,
+		.gpio	= S3C64XX_GPL(10),	/* EINT 18 */
+		.type	= EV_KEY,
+		.wakeup	= 1,
+		.active_low = 1,
+	},
+	[1] = {
+		.code	= SW_FRONT_PROXIMITY,
+		.gpio	= S3C64XX_GPN(11),	/* EINT 11 */
+		.type	= EV_SW,
+	},
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+	.buttons	= crag6410_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(17), 1, NULL, IORESOURCE_IRQ \
+				| IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(crag6410_dm9k_resource),
+	.resource	= crag6410_dm9k_resource,
+	.dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+	[0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
+};
+
+static struct platform_device crag6410_mmgpio = {
+	.name		= "basic-mmio-gpio",
+	.id		= -1,
+	.resource	= crag6410_mmgpio_resource,
+	.num_resources	= ARRAY_SIZE(crag6410_mmgpio_resource),
+	.dev.platform_data = &(struct bgpio_pdata) {
+		.base	= MMGPIO_GPIO_BASE,
+	},
+};
+
+static struct platform_device speyside_device = {
+	.name		= "speyside",
+	.id		= -1,
+};
+
+static struct platform_device lowland_device = {
+	.name		= "lowland",
+	.id		= -1,
+};
+
+static struct platform_device tobermory_device = {
+	.name		= "tobermory",
+	.id		= -1,
+};
+
+static struct platform_device littlemill_device = {
+	.name		= "littlemill",
+	.id		= -1,
+};
+
+static struct platform_device bells_wm2200_device = {
+	.name		= "bells",
+	.id		= 0,
+};
+
+static struct platform_device bells_wm5102_device = {
+	.name		= "bells",
+	.id		= 1,
+};
+
+static struct platform_device bells_wm5110_device = {
+	.name		= "bells",
+	.id		= 2,
+};
+
+static struct regulator_consumer_supply wallvdd_consumers[] = {
+	REGULATOR_SUPPLY("SPKVDD", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
+
+	REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
+	REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
+
+	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
+	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
+	REGULATOR_SUPPLY("DC3VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO1VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO2VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO4VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO5VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO6VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO7VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO8VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO9VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO10VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO11VDD", "0-0034"),
+
+	REGULATOR_SUPPLY("DC1VDD", "1-0034"),
+	REGULATOR_SUPPLY("DC2VDD", "1-0034"),
+	REGULATOR_SUPPLY("DC3VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO1VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO2VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO4VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO5VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO6VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO7VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO8VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO9VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO10VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO11VDD", "1-0034"),
+};
+
+static struct regulator_init_data wallvdd_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
+	.consumer_supplies = wallvdd_consumers,
+};
+
+static struct fixed_voltage_config wallvdd_pdata = {
+	.supply_name = "WALLVDD",
+	.microvolts = 5000000,
+	.init_data = &wallvdd_data,
+};
+
+static struct platform_device wallvdd_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.dev = {
+		.platform_data = &wallvdd_pdata,
+	},
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc2,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_usb_hsotg,
+	&samsung_device_pwm,
+	&s3c64xx_device_iis0,
+	&s3c64xx_device_iis1,
+	&samsung_device_keypad,
+	&crag6410_gpio_keydev,
+	&crag6410_dm9k_device,
+	&s3c64xx_device_spi0,
+	&crag6410_mmgpio,
+	&crag6410_lcd_powerdev,
+	&crag6410_backlight_device,
+	&speyside_device,
+	&tobermory_device,
+	&littlemill_device,
+	&lowland_device,
+	&bells_wm2200_device,
+	&bells_wm5102_device,
+	&bells_wm5110_device,
+	&wallvdd_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+	.gpio_base	= PCA935X_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+	.dvs_control_src = 1,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] = {
+	REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm = {
+	.constraints = {
+		.name = "VDDARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+	.consumer_supplies = vddarm_consumers,
+	.supply_regulator = "WALLVDD",
+	.driver_data = &vddarm_pdata,
+};
+
+static struct regulator_consumer_supply vddint_consumers[] = {
+	REGULATOR_SUPPLY("vddint", NULL),
+};
+
+static struct regulator_init_data vddint = {
+	.constraints = {
+		.name = "VDDINT",
+		.min_uV = 1000000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddint_consumers),
+	.consumer_supplies = vddint_consumers,
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem = {
+	.constraints = {
+		.name = "VDDMEM",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddsys = {
+	.constraints = {
+		.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc = {
+	.constraints = {
+		.name = "VDDMMC,UH",
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+	.consumer_supplies = vddmmc_consumers,
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotgi = {
+	.constraints = {
+		.name = "VDDOTGi",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotg = {
+	.constraints = {
+		.name = "VDDOTG",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddhi = {
+	.constraints = {
+		.name = "VDDHI",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddadc = {
+	.constraints = {
+		.name = "VDDADC,VDDDAC",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem0 = {
+	.constraints = {
+		.name = "VDDMEM0",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddpll = {
+	.constraints = {
+		.name = "VDDPLL",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddlcd = {
+	.constraints = {
+		.name = "VDDLCD",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddalive = {
+	.constraints = {
+		.name = "VDDALIVE",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct wm831x_backup_pdata banff_backup_pdata = {
+	.charger_enable = 1,
+	.vlim = 2500,  /* mV */
+	.ilim = 200,   /* uA */
+};
+
+static struct wm831x_status_pdata banff_red_led = {
+	.name = "banff:red:",
+	.default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led = {
+	.name = "banff:green:",
+	.default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata = {
+	.data_irq = S3C_EINT(26),
+	.pd_irq = S3C_EINT(27),
+};
+
+static struct wm831x_pdata crag_pmic_pdata = {
+	.wm831x_num = 1,
+	.irq_base = BANFF_PMIC_IRQ_BASE,
+	.gpio_base = BANFF_PMIC_GPIO_BASE,
+	.soft_shutdown = true,
+
+	.backup = &banff_backup_pdata,
+
+	.gpio_defaults = {
+		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
+		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
+		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
+		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
+		[11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
+	},
+
+	.dcdc = {
+		&vddarm,  /* DCDC1 */
+		&vddint,  /* DCDC2 */
+		&vddmem,  /* DCDC3 */
+	},
+
+	.ldo = {
+		&vddsys,   /* LDO1 */
+		&vddmmc,   /* LDO2 */
+		NULL,      /* LDO3 */
+		&vddotgi,  /* LDO4 */
+		&vddotg,   /* LDO5 */
+		&vddhi,    /* LDO6 */
+		&vddadc,   /* LDO7 */
+		&vddmem0,  /* LDO8 */
+		&vddpll,   /* LDO9 */
+		&vddlcd,   /* LDO10 */
+		&vddalive, /* LDO11 */
+	},
+
+	.status = {
+		&banff_green_led,
+		&banff_red_led,
+	},
+
+	.touch = &touch_pdata,
+};
+
+/*
+ * VDDARM is eventually ending up as a regulator hanging on the MFD cell device
+ * "wm831x-buckv.1" spawn from drivers/mfd/wm831x-core.c.
+ *
+ * From the note on the platform data we can see that this is clearly DVS1
+ * and assigned as dcdc1 resource to the MFD core which sets .id of the cell
+ * spawning the DVS1 platform device to 1, then the cell platform device
+ * name is calculated from 10*instance + id resulting in the device name
+ * "wm831x-buckv.11"
+ */
+static struct gpiod_lookup_table crag_pmic_gpiod_table = {
+	.dev_id = "wm831x-buckv.11",
+	.table = {
+		GPIO_LOOKUP("GPIOK", 0, "dvs", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct i2c_board_info i2c_devs0[] = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("tca6408", 0x20),
+	  .platform_data = &crag6410_pca_data,
+	},
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &crag_pmic_pdata,
+	  .irq = S3C_EINT(23),
+	},
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+	.frequency = 400000,
+};
+
+static struct regulator_consumer_supply pvdd_1v2_consumers[] = {
+	REGULATOR_SUPPLY("DCVDD", "spi0.0"),
+	REGULATOR_SUPPLY("AVDD", "spi0.0"),
+	REGULATOR_SUPPLY("AVDD", "spi0.1"),
+};
+
+static struct regulator_init_data pvdd_1v2 = {
+	.constraints = {
+		.name = "PVDD_1V2",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+
+	.consumer_supplies = pvdd_1v2_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_1v8_consumers[] = {
+	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
+	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
+	REGULATOR_SUPPLY("CPVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DCVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD", "spi0.0"),
+
+	REGULATOR_SUPPLY("DBVDD", "1-003a"),
+	REGULATOR_SUPPLY("LDOVDD", "1-003a"),
+	REGULATOR_SUPPLY("CPVDD", "1-003a"),
+	REGULATOR_SUPPLY("AVDD", "1-003a"),
+	REGULATOR_SUPPLY("DBVDD1", "spi0.1"),
+	REGULATOR_SUPPLY("DBVDD2", "spi0.1"),
+	REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
+	REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
+	REGULATOR_SUPPLY("CPVDD", "spi0.1"),
+};
+
+static struct regulator_init_data pvdd_1v8 = {
+	.constraints = {
+		.name = "PVDD_1V8",
+		.always_on = 1,
+	},
+
+	.consumer_supplies = pvdd_1v8_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_3v3_consumers[] = {
+	REGULATOR_SUPPLY("MICVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD1", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_3v3 = {
+	.constraints = {
+		.name = "PVDD_3V3",
+		.always_on = 1,
+	},
+
+	.consumer_supplies = pvdd_3v3_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
+};
+
+static struct wm831x_pdata glenfarclas_pmic_pdata = {
+	.wm831x_num = 2,
+	.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
+	.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+	.soft_shutdown = true,
+
+	.gpio_defaults = {
+		/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
+		[0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+		[1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+		[2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+	},
+
+	.dcdc = {
+		&pvdd_1v2,  /* DCDC1 */
+		&pvdd_1v8,  /* DCDC2 */
+		&pvdd_3v3,  /* DCDC3 */
+	},
+
+	.disable_touch = true,
+};
+
+static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
+	.gpios = {
+		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
+		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
+		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
+		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
+		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+	},
+};
+
+static struct i2c_board_info i2c_devs1[] = {
+	{ I2C_BOARD_INFO("wm8311", 0x34),
+	  .irq = S3C_EINT(0),
+	  .platform_data = &glenfarclas_pmic_pdata },
+
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x20) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x22) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
+	  .platform_data = &wm1250_ev1_pdata },
+};
+
+static struct s3c2410_platform_i2c i2c1_pdata = {
+	.frequency = 400000,
+	.bus_num = 1,
+};
+
+static void __init crag6410_map_io(void)
+{
+	s3c64xx_init_io(NULL, 0);
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+
+	/* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+	.host_caps		= MMC_CAP_POWER_OFF_CARD,
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+	/* Set all the necessary GPG pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+	/* force card-detected for prototype 0 */
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.cfg_gpio		= crag6410_cfg_sdhci0,
+	.host_caps		= MMC_CAP_POWER_OFF_CARD,
+};
+
+static const struct gpio_led gpio_leds[] = {
+	{
+		.name = "d13:green:",
+		.gpio = MMGPIO_GPIO_BASE + 0,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d14:green:",
+		.gpio = MMGPIO_GPIO_BASE + 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d15:green:",
+		.gpio = MMGPIO_GPIO_BASE + 2,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d16:green:",
+		.gpio = MMGPIO_GPIO_BASE + 3,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d17:green:",
+		.gpio = MMGPIO_GPIO_BASE + 4,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d18:green:",
+		.gpio = MMGPIO_GPIO_BASE + 5,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d19:green:",
+		.gpio = MMGPIO_GPIO_BASE + 6,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d20:green:",
+		.gpio = MMGPIO_GPIO_BASE + 7,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+};
+
+static const struct gpio_led_platform_data gpio_leds_pdata = {
+	.leds = gpio_leds,
+	.num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
+
+static struct gpiod_lookup_table crag_spi0_gpiod_table = {
+	.dev_id = "s3c6410-spi.0",
+	.table = {
+		GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static void __init crag6410_machine_init(void)
+{
+	/* Open drain IRQs need pullups */
+	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+	gpio_request(S3C64XX_GPB(0), "LCD power");
+	gpio_direction_output(S3C64XX_GPB(0), 0);
+
+	gpio_request(S3C64XX_GPF(14), "LCD PWM");
+	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */
+
+	gpio_request(S3C64XX_GPB(1), "SD power");
+	gpio_direction_output(S3C64XX_GPB(1), 0);
+
+	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+	gpio_direction_output(S3C64XX_GPF(10), 1);
+
+	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+	s3c_i2c0_set_platdata(&i2c0_pdata);
+	s3c_i2c1_set_platdata(&i2c1_pdata);
+	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+	dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);
+
+	gpiod_add_lookup_table(&crag_pmic_gpiod_table);
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+	gpiod_add_lookup_table(&crag_spi0_gpiod_table);
+	s3c64xx_spi0_set_platdata(0, 2);
+
+	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
+	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+	gpio_led_register_device(-1, &gpio_leds_pdata);
+
+	regulator_has_full_constraints();
+
+	s3c64xx_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= crag6410_map_io,
+	.init_machine	= crag6410_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
new file mode 100644
index 000000000..d50a81d85
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-gta02.c
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
+//
+// Copyright (C) 2006-2009 by Openmoko, Inc.
+// Authors: Harald Welte <laforge@openmoko.org>
+//          Andy Green <andy@openmoko.org>
+//          Werner Almesberger <werner@openmoko.org>
+// All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "gta02.h"
+
+static struct pcf50633 *gta02_pcf;
+
+/*
+ * This gets called frequently when we paniced.
+ */
+
+static long gta02_panic_blink(int state)
+{
+	char led;
+
+	led = (state) ? 1 : 0;
+	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
+
+	return 0;
+}
+
+
+static struct map_desc gta02_iodesc[] __initdata = {
+	{
+		.virtual	= 0xe0000000,
+		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+/*
+ * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+ * We use this to recognize that we can pull 1A from the USB socket.
+ *
+ * These constants are the measured pcf50633 ADC levels with the 1A
+ * charger / 48K resistor, and with no pulldown resistor.
+ */
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+#ifdef CONFIG_PCF50633_ADC
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+	int  ma;
+
+	/* Interpret charger type */
+	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+		/*
+		 * Sanity - stop GPO driving out now that we have a 1A charger
+		 * GPO controls USB Host power generation on GTA02
+		 */
+		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+		ma = 1000;
+	} else
+		ma = 100;
+
+	pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+#endif
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+	if (gta02_usb_vbus_draw) {
+		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
+		return;
+	}
+
+#ifdef CONFIG_PCF50633_ADC
+	pcf50633_adc_async_read(gta02_pcf,
+				PCF50633_ADCC1_MUX_ADCIN1,
+				PCF50633_ADCC1_AVERAGE_16,
+				gta02_configure_pmu_for_charger,
+				NULL);
+#else
+	/*
+	 * If the PCF50633 ADC is disabled we fallback to a
+	 * 100mA limit for safety.
+	 */
+	pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
+#endif
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+	if (irq == PCF50633_IRQ_USBINS) {
+		schedule_delayed_work(&gta02_charger_work,
+				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
+
+		return;
+	}
+
+	if (irq == PCF50633_IRQ_USBREM) {
+		cancel_delayed_work_sync(&gta02_charger_work);
+		gta02_usb_vbus_draw = 0;
+	}
+}
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+	if (!gta02_pcf)
+		return;
+
+	gta02_usb_vbus_draw = ma;
+
+	schedule_delayed_work(&gta02_charger_work,
+			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+#else /* !CONFIG_CHARGER_PCF50633 */
+#define gta02_pmu_event_callback	NULL
+#define gta02_udc_vbus_draw		NULL
+#endif
+
+static char *gta02_batteries[] = {
+	"battery",
+};
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+	.default_brightness = 0x3f,
+	.default_brightness_limit = 0,
+	.ramp_time = 5,
+};
+
+static struct pcf50633_platform_data gta02_pcf_pdata = {
+	.resumers = {
+		[0] =	PCF50633_INT1_USBINS |
+			PCF50633_INT1_USBREM |
+			PCF50633_INT1_ALARM,
+		[1] =	PCF50633_INT2_ONKEYF,
+		[2] =	PCF50633_INT3_ONKEY1S,
+		[3] =	PCF50633_INT4_LOWSYS |
+			PCF50633_INT4_LOWBAT |
+			PCF50633_INT4_HIGHTMP,
+	},
+
+	.batteries = gta02_batteries,
+	.num_batteries = ARRAY_SIZE(gta02_batteries),
+
+	.charger_reference_current_ma = 1000,
+
+	.backlight_data = &gta02_backlight_data,
+
+	.reg_init_data = {
+		[PCF50633_REGULATOR_AUTO] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_DOWN1] = {
+			.constraints = {
+				.min_uV = 1300000,
+				.max_uV = 1600000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_DOWN2] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.always_on = 1,
+			},
+		},
+		[PCF50633_REGULATOR_HCLDO] = {
+			.constraints = {
+				.min_uV = 2000000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+						REGULATOR_CHANGE_STATUS,
+			},
+		},
+		[PCF50633_REGULATOR_LDO1] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO2] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO3] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO4] = {
+			.constraints = {
+				.min_uV = 3200000,
+				.max_uV = 3200000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO5] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO6] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+		},
+		[PCF50633_REGULATOR_MEMLDO] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+		},
+
+	},
+	.mbc_event_callback = gta02_pmu_event_callback,
+};
+
+
+/* NOR Flash. */
+
+#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
+#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+	.width		= 2,
+};
+
+static struct resource gta02_nor_flash_resource =
+	DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
+
+static struct platform_device gta02_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &gta02_nor_flash_data,
+	},
+	.resource	= &gta02_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+
+static struct platform_device s3c24xx_pwm_device = {
+	.name		= "s3c24xx_pwm",
+	.num_resources	= 0,
+};
+
+static struct platform_device gta02_dfbmcs320_device = {
+	.name = "dfbmcs320",
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf50633", 0x73),
+		.irq = GTA02_IRQ_PCF50633,
+		.platform_data = &gta02_pcf_pdata,
+	},
+	{
+		I2C_BOARD_INFO("wm8753", 0x1a),
+	},
+};
+
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
+	[0] = {
+		/*
+		 * This name is also hard-coded in the boot loaders, so
+		 * changing it would would require all users to upgrade
+		 * their boot loaders, some of which are stored in a NOR
+		 * that is considered to be immutable.
+		 */
+		.name		= "neo1973-nand",
+		.nr_chips	= 1,
+		.flash_bbt	= 1,
+	},
+};
+
+/*
+ * Choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory).
+ */
+
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
+	.sets		= gta02_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+
+/* Get PMU to set USB current limit accordingly. */
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
+	.vbus_draw	= gta02_udc_vbus_draw,
+};
+
+static struct gpiod_lookup_table gta02_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED,
+	},
+	.port[1]	= {
+		.flags	= 0,
+	},
+};
+
+/* Touchscreen */
+static struct s3c2410_ts_mach_info gta02_ts_info = {
+	.delay			= 10000,
+	.presc			= 0xff, /* slow as we can go */
+	.oversampling_shift	= 2,
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+	{
+		.gpio = GTA02_GPIO_AUX_KEY,
+		.code = KEY_PHONE,
+		.desc = "Aux",
+		.type = EV_KEY,
+		.debounce_interval = 100,
+	},
+	{
+		.gpio = GTA02_GPIO_HOLD_KEY,
+		.code = KEY_PAUSE,
+		.desc = "Hold",
+		.type = EV_KEY,
+		.debounce_interval = 100,
+	},
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+	.buttons = gta02_buttons,
+	.nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_buttons_device = {
+	.name = "gpio-keys",
+	.id = -1,
+	.dev = {
+		.platform_data = &gta02_buttons_pdata,
+	},
+};
+
+static struct gpiod_lookup_table gta02_audio_gpio_table = {
+	.dev_id = "neo1973-audio",
+	.table = {
+		GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device gta02_audio = {
+	.name = "neo1973-audio",
+	.id = -1,
+};
+
+static struct gpiod_lookup_table gta02_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static void __init gta02_map_io(void)
+{
+	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+
+/* These are the guys that don't need to be children of PMU. */
+
+static struct platform_device *gta02_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&s3c_device_nand,
+	&gta02_nor_flash,
+	&s3c24xx_pwm_device,
+	&s3c_device_iis,
+	&s3c_device_i2c0,
+	&gta02_dfbmcs320_device,
+	&gta02_buttons_device,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&gta02_audio,
+};
+
+static void gta02_poweroff(void)
+{
+	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+}
+
+static void __init gta02_machine_init(void)
+{
+	/* Set the panic callback to turn AUX LED on or off. */
+	panic_blink = gta02_panic_blink;
+
+	s3c_pm_init();
+
+#ifdef CONFIG_CHARGER_PCF50633
+	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
+#endif
+
+	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c24xx_ts_set_platdata(&gta02_ts_info);
+	s3c_ohci_set_platdata(&gta02_usb_info);
+	s3c_nand_set_platdata(&gta02_nand_info);
+	s3c_i2c0_set_platdata(NULL);
+
+	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	gpiod_add_lookup_table(&gta02_udc_gpio_table);
+	gpiod_add_lookup_table(&gta02_audio_gpio_table);
+	gpiod_add_lookup_table(&gta02_mmc_gpio_table);
+	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+	pm_power_off = gta02_poweroff;
+
+	regulator_has_full_constraints();
+}
+
+static void __init gta02_init_time(void)
+{
+	s3c2442_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2442,
+	.map_io		= gta02_map_io,
+	.init_irq	= s3c2442_init_irq,
+	.init_machine	= gta02_machine_init,
+	.init_time	= gta02_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
new file mode 100644
index 000000000..83ac6cfdb
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2005 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// https://www.handhelds.org/projects/h1940.html
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/pda_power.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
+#include <linux/export.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <sound/uda1380.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include "map.h"
+#include "hardware-s3c24xx.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "h1940.h"
+
+#define H1940_LATCH		((void __force __iomem *)0xF8000000)
+
+#define H1940_PA_LATCH		S3C2410_CS2
+
+#define H1940_LATCH_BIT(x)	(1 << ((x) + 16 - S3C_GPIO_END))
+
+#define S3C24XX_PLL_MDIV_SHIFT         (12)
+#define S3C24XX_PLL_PDIV_SHIFT         (4)
+#define S3C24XX_PLL_SDIV_SHIFT         (0)
+
+static struct map_desc h1940_iodesc[] __initdata = {
+	[0] = {
+		.virtual	= (unsigned long)H1940_LATCH,
+		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	},
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x245,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x00,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.uart_flags  = UPF_CONS_FLOW,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+/* Board control latch control */
+
+static unsigned int latch_state;
+
+static void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	latch_state &= ~clear;
+	latch_state |= set;
+
+	__raw_writel(latch_state, H1940_LATCH);
+
+	local_irq_restore(flags);
+}
+
+static inline int h1940_gpiolib_to_latch(int offset)
+{
+	return 1 << (offset + 16);
+}
+
+static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	int latch_bit = h1940_gpiolib_to_latch(offset);
+
+	h1940_latch_control(value ? 0 : latch_bit,
+		value ? latch_bit : 0);
+}
+
+static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	h1940_gpiolib_latch_set(chip, offset, value);
+	return 0;
+}
+
+static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
+					unsigned offset)
+{
+	return (latch_state >> (offset + 16)) & 1;
+}
+
+static struct gpio_chip h1940_latch_gpiochip = {
+	.base			= H1940_LATCH_GPIO(0),
+	.owner			= THIS_MODULE,
+	.label			= "H1940_LATCH",
+	.ngpio			= 16,
+	.direction_output	= h1940_gpiolib_latch_output,
+	.set			= h1940_gpiolib_latch_set,
+	.get			= h1940_gpiolib_latch_get,
+};
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+};
+
+static struct gpiod_lookup_table h1940_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
+		.delay = 10000,
+		.presc = 49,
+		.oversampling_shift = 2,
+		.cfg_gpio = s3c24xx_ts_cfg_gpio,
+};
+
+/*
+ * Set lcd on or off
+ */
+static struct s3c2410fb_display h1940_lcd __initdata = {
+	.lcdcon5=	S3C2410_LCDCON5_FRM565 | \
+			S3C2410_LCDCON5_INVVLINE | \
+			S3C2410_LCDCON5_HWSWP,
+
+	.type =		S3C2410_LCDCON1_TFT,
+	.width =	240,
+	.height =	320,
+	.pixclock =	260000,
+	.xres =		240,
+	.yres =		320,
+	.bpp =		16,
+	.left_margin =	8,
+	.right_margin =	20,
+	.hsync_len =	4,
+	.upper_margin =	8,
+	.lower_margin = 7,
+	.vsync_len =	1,
+};
+
+static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
+	.displays = &h1940_lcd,
+	.num_displays = 1,
+	.default_display = 0,
+
+	.lpcsel =	0x02,
+	.gpccon =	0xaa940659,
+	.gpccon_mask =	0xffffc0f0,
+	.gpccon_reg =	S3C2410_GPCCON,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
+	.gpdcon =	0xaa84aaa0,
+	.gpdcon_mask =	0xffffffff,
+	.gpdcon_reg =	S3C2410_GPDCON,
+	.gpdup =	0x0000faff,
+	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
+};
+
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int h1940_is_ac_online(void)
+{
+	return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(S3C2410_GPF(2));
+}
+
+static char *h1940_supplicants[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init			= power_supply_init,
+	.is_ac_online		= h1940_is_ac_online,
+	.exit			= power_supply_exit,
+	.supplied_to		= h1940_supplicants,
+	.num_supplicants	= ARRAY_SIZE(h1940_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
+};
+
+static struct platform_device power_supply = {
+	.name		= "pda-power",
+	.id		= -1,
+	.dev		= {
+				.platform_data =
+					&power_supply_info,
+	},
+	.resource	= power_supply_resources,
+	.num_resources	= ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+	{ .volt = 4070, .cur = 162, .level = 100},
+	{ .volt = 4040, .cur = 165, .level = 95},
+	{ .volt = 4016, .cur = 164, .level = 90},
+	{ .volt = 3996, .cur = 166, .level = 85},
+	{ .volt = 3971, .cur = 168, .level = 80},
+	{ .volt = 3951, .cur = 168, .level = 75},
+	{ .volt = 3931, .cur = 170, .level = 70},
+	{ .volt = 3903, .cur = 172, .level = 65},
+	{ .volt = 3886, .cur = 172, .level = 60},
+	{ .volt = 3858, .cur = 176, .level = 55},
+	{ .volt = 3842, .cur = 176, .level = 50},
+	{ .volt = 3818, .cur = 176, .level = 45},
+	{ .volt = 3789, .cur = 180, .level = 40},
+	{ .volt = 3769, .cur = 180, .level = 35},
+	{ .volt = 3749, .cur = 184, .level = 30},
+	{ .volt = 3732, .cur = 184, .level = 25},
+	{ .volt = 3716, .cur = 184, .level = 20},
+	{ .volt = 3708, .cur = 184, .level = 15},
+	{ .volt = 3716, .cur = 96, .level = 10},
+	{ .volt = 3700, .cur = 96, .level = 5},
+	{ .volt = 3684, .cur = 96, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+	{ .volt = 4130, .cur = 0, .level = 100},
+	{ .volt = 3982, .cur = 0, .level = 50},
+	{ .volt = 3854, .cur = 0, .level = 10},
+	{ .volt = 3841, .cur = 0, .level = 0},
+};
+
+static struct gpiod_lookup_table h1940_bat_gpio_table = {
+	.dev_id = "s3c-adc-battery",
+	.table = {
+		/* Charge status S3C2410_GPF(3) */
+		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static int h1940_bat_init(void)
+{
+	int ret;
+
+	ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
+	if (ret)
+		return ret;
+	gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
+
+	return 0;
+
+}
+
+static void h1940_bat_exit(void)
+{
+	gpio_free(H1940_LATCH_SM803_ENABLE);
+}
+
+static void h1940_enable_charger(void)
+{
+	gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
+}
+
+static void h1940_disable_charger(void)
+{
+	gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
+}
+
+static struct s3c_adc_bat_pdata h1940_bat_cfg = {
+	.init = h1940_bat_init,
+	.exit = h1940_bat_exit,
+	.enable_charger = h1940_enable_charger,
+	.disable_charger = h1940_disable_charger,
+	.lut_noac = bat_lut_noac,
+	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+	.lut_acin = bat_lut_acin,
+	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+	.volt_channel = 0,
+	.current_channel = 1,
+	.volt_mult = 4056,
+	.current_mult = 1893,
+	.internal_impedance = 200,
+	.backup_volt_channel = 3,
+	/* TODO Check backup volt multiplier */
+	.backup_volt_mult = 4056,
+	.backup_volt_min = 0,
+	.backup_volt_max = 4149288
+};
+
+static struct platform_device h1940_battery = {
+	.name             = "s3c-adc-battery",
+	.id               = -1,
+	.dev = {
+		.parent = &s3c_device_adc.dev,
+		.platform_data = &h1940_bat_cfg,
+	},
+};
+
+static DEFINE_SPINLOCK(h1940_blink_spin);
+
+int h1940_led_blink_set(struct gpio_desc *desc, int state,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	int blink_gpio, check_gpio1, check_gpio2;
+	int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
+
+	switch (gpio) {
+	case H1940_LATCH_LED_GREEN:
+		blink_gpio = S3C2410_GPA(7);
+		check_gpio1 = S3C2410_GPA(1);
+		check_gpio2 = S3C2410_GPA(3);
+		break;
+	case H1940_LATCH_LED_RED:
+		blink_gpio = S3C2410_GPA(1);
+		check_gpio1 = S3C2410_GPA(7);
+		check_gpio2 = S3C2410_GPA(3);
+		break;
+	default:
+		blink_gpio = S3C2410_GPA(3);
+		check_gpio1 = S3C2410_GPA(1);
+		check_gpio2 = S3C2410_GPA(7);
+		break;
+	}
+
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
+		*delay_on = *delay_off = 500;
+
+	spin_lock(&h1940_blink_spin);
+
+	switch (state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		if (!gpio_get_value(check_gpio1) &&
+		    !gpio_get_value(check_gpio2))
+			gpio_set_value(H1940_LATCH_LED_FLASH, 0);
+		gpio_set_value(blink_gpio, 0);
+		if (gpio_is_valid(gpio))
+			gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		if (gpio_is_valid(gpio))
+			gpio_set_value(gpio, 0);
+		gpio_set_value(H1940_LATCH_LED_FLASH, 1);
+		gpio_set_value(blink_gpio, 1);
+		break;
+	}
+
+	spin_unlock(&h1940_blink_spin);
+
+	return 0;
+}
+EXPORT_SYMBOL(h1940_led_blink_set);
+
+static struct gpio_led h1940_leds_desc[] = {
+	{
+		.name			= "Green",
+		.default_trigger	= "main-battery-full",
+		.gpio			= H1940_LATCH_LED_GREEN,
+		.retain_state_suspended	= 1,
+	},
+	{
+		.name			= "Red",
+		.default_trigger
+			= "main-battery-charging-blink-full-solid",
+		.gpio			= H1940_LATCH_LED_RED,
+		.retain_state_suspended	= 1,
+	},
+};
+
+static struct gpio_led_platform_data h1940_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(h1940_leds_desc),
+	.leds		= h1940_leds_desc,
+	.gpio_blink_set	= h1940_led_blink_set,
+};
+
+static struct platform_device h1940_device_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+			.platform_data = &h1940_leds_pdata,
+	},
+};
+
+static struct platform_device h1940_device_bluetooth = {
+	.name             = "h1940-bt",
+	.id               = -1,
+};
+
+static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+	s3c24xx_mci_def_set_power(power_mode, vdd);
+
+	switch (power_mode) {
+	case MMC_POWER_OFF:
+		gpio_set_value(H1940_LATCH_SD_POWER, 0);
+		break;
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		gpio_set_value(H1940_LATCH_SD_POWER, 1);
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
+	.set_power     = h1940_set_mmc_power,
+	.ocr_avail     = MMC_VDD_32_33,
+};
+
+static struct gpiod_lookup_table h1940_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPF(5) */
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPH(8) */
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table h1940_audio_gpio_table = {
+	.dev_id = "h1940-audio",
+	.table = {
+		GPIO_LOOKUP("H1940_LATCH",
+			    H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
+			    "speaker-power", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device h1940_audio = {
+	.name = "h1940-audio",
+	.id   = -1,
+};
+
+static struct pwm_lookup h1940_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+		   PWM_POLARITY_NORMAL),
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+	gpio_request(S3C2410_GPB(0), "Backlight");
+
+	gpio_direction_output(S3C2410_GPB(0), 0);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+
+	return 0;
+}
+
+static int h1940_backlight_notify(struct device *dev, int brightness)
+{
+	if (!brightness) {
+		gpio_direction_output(S3C2410_GPB(0), 1);
+		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+	} else {
+		gpio_direction_output(S3C2410_GPB(0), 0);
+		s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+	}
+	return brightness;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+	gpio_direction_output(S3C2410_GPB(0), 1);
+	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+}
+
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	.init           = h1940_backlight_init,
+	.notify		= h1940_backlight_notify,
+	.exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &samsung_device_pwm.dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	int value, retries = 100;
+
+	if (!power) {
+		gpio_set_value(S3C2410_GPC(0), 0);
+		/* wait for 3ac */
+		do {
+			value = gpio_get_value(S3C2410_GPC(6));
+		} while (value && retries--);
+
+		gpio_set_value(H1940_LATCH_LCD_P2, 0);
+		gpio_set_value(H1940_LATCH_LCD_P3, 0);
+		gpio_set_value(H1940_LATCH_LCD_P4, 0);
+
+		gpio_direction_output(S3C2410_GPC(1), 0);
+		gpio_direction_output(S3C2410_GPC(4), 0);
+
+		gpio_set_value(H1940_LATCH_LCD_P1, 0);
+		gpio_set_value(H1940_LATCH_LCD_P0, 0);
+
+		gpio_set_value(S3C2410_GPC(5), 0);
+
+	} else {
+		gpio_set_value(H1940_LATCH_LCD_P0, 1);
+		gpio_set_value(H1940_LATCH_LCD_P1, 1);
+
+		gpio_direction_input(S3C2410_GPC(1));
+		gpio_direction_input(S3C2410_GPC(4));
+		mdelay(10);
+		s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
+
+		gpio_set_value(S3C2410_GPC(5), 1);
+		gpio_set_value(S3C2410_GPC(0), 1);
+
+		gpio_set_value(H1940_LATCH_LCD_P3, 1);
+		gpio_set_value(H1940_LATCH_LCD_P2, 1);
+		gpio_set_value(H1940_LATCH_LCD_P4, 1);
+	}
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+	.set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+	.name                   = "platform-lcd",
+	.dev.parent             = &s3c_device_lcd.dev,
+	.dev.platform_data      = &h1940_lcd_power_data,
+};
+
+static struct uda1380_platform_data uda1380_info = {
+	.gpio_power	= H1940_LATCH_UDA_POWER,
+	.gpio_reset	= S3C2410_GPA(12),
+	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info h1940_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("uda1380", 0x1a),
+		.platform_data = &uda1380_info,
+	},
+};
+
+#define DECLARE_BUTTON(p, k, n, w)	\
+	{				\
+		.gpio		= p,	\
+		.code		= k,	\
+		.desc		= n,	\
+		.wakeup		= w,	\
+		.active_low	= 1,	\
+	}
+
+static struct gpio_keys_button h1940_buttons[] = {
+	DECLARE_BUTTON(S3C2410_GPF(0),       KEY_POWER,          "Power", 1),
+	DECLARE_BUTTON(S3C2410_GPF(6),       KEY_ENTER,         "Select", 1),
+	DECLARE_BUTTON(S3C2410_GPF(7),      KEY_RECORD,         "Record", 0),
+	DECLARE_BUTTON(S3C2410_GPG(0),         KEY_F11,       "Calendar", 0),
+	DECLARE_BUTTON(S3C2410_GPG(2),         KEY_F12,       "Contacts", 0),
+	DECLARE_BUTTON(S3C2410_GPG(3),        KEY_MAIL,           "Mail", 0),
+	DECLARE_BUTTON(S3C2410_GPG(6),        KEY_LEFT,     "Left_arrow", 0),
+	DECLARE_BUTTON(S3C2410_GPG(7),    KEY_HOMEPAGE,           "Home", 0),
+	DECLARE_BUTTON(S3C2410_GPG(8),       KEY_RIGHT,    "Right_arrow", 0),
+	DECLARE_BUTTON(S3C2410_GPG(9),          KEY_UP,       "Up_arrow", 0),
+	DECLARE_BUTTON(S3C2410_GPG(10),       KEY_DOWN,     "Down_arrow", 0),
+};
+
+static struct gpio_keys_platform_data h1940_buttons_data = {
+	.buttons	= h1940_buttons,
+	.nbuttons	= ARRAY_SIZE(h1940_buttons),
+};
+
+static struct platform_device h1940_dev_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data  = &h1940_buttons_data,
+	}
+};
+
+static struct platform_device *h1940_devices[] __initdata = {
+	&h1940_dev_buttons,
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_usbgadget,
+	&h1940_device_leds,
+	&h1940_device_bluetooth,
+	&s3c_device_sdi,
+	&s3c_device_rtc,
+	&samsung_device_pwm,
+	&h1940_backlight,
+	&h1940_lcd_powerdev,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&power_supply,
+	&h1940_battery,
+	&h1940_audio,
+};
+
+static void __init h1940_map_io(void)
+{
+	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
+	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+
+	/* setup PM */
+
+#ifdef CONFIG_PM_H1940
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+	s3c_pm_init();
+
+	/* Add latch gpio chip, set latch initial value */
+	h1940_latch_control(0, 0);
+	WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
+}
+
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init h1940_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
+static void __init h1940_init(void)
+{
+	u32 tmp;
+
+	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	gpiod_add_lookup_table(&h1940_udc_gpio_table);
+	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
+	gpiod_add_lookup_table(&h1940_audio_gpio_table);
+	gpiod_add_lookup_table(&h1940_bat_gpio_table);
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
+ 	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
+	s3c_i2c0_set_platdata(NULL);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
+	writel(tmp, S3C2410_UPLLCON);
+
+	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(1), "LCD power");
+	gpio_request(S3C2410_GPC(4), "LCD power");
+	gpio_request(S3C2410_GPC(5), "LCD power");
+	gpio_request(S3C2410_GPC(6), "LCD power");
+	gpio_request(H1940_LATCH_LCD_P0, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P1, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P2, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P3, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P4, "LCD power");
+	gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
+	gpio_direction_output(S3C2410_GPC(0), 0);
+	gpio_direction_output(S3C2410_GPC(1), 0);
+	gpio_direction_output(S3C2410_GPC(4), 0);
+	gpio_direction_output(S3C2410_GPC(5), 0);
+	gpio_direction_input(S3C2410_GPC(6));
+	gpio_direction_output(H1940_LATCH_LCD_P0, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P1, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P2, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P3, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
+	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+
+	gpio_request(H1940_LATCH_SD_POWER, "SD power");
+	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
+
+	pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
+	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
+
+	gpio_request(S3C2410_GPA(1), "Red LED blink");
+	gpio_request(S3C2410_GPA(3), "Blue LED blink");
+	gpio_request(S3C2410_GPA(7), "Green LED blink");
+	gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
+	gpio_direction_output(S3C2410_GPA(1), 0);
+	gpio_direction_output(S3C2410_GPA(3), 0);
+	gpio_direction_output(S3C2410_GPA(7), 0);
+	gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
+
+	i2c_register_board_info(0, h1940_i2c_devices,
+		ARRAY_SIZE(h1940_i2c_devices));
+}
+
+MACHINE_START(H1940, "IPAQ-H1940")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= h1940_map_io,
+	.reserve	= h1940_reserve,
+	.init_irq	= s3c2410_init_irq,
+	.init_machine	= h1940_init,
+	.init_time	= h1940_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
new file mode 100644
index 000000000..49ba16c44
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-hmt.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// mach-hmt.c - Platform code for Airgoo HMT
+//
+// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <video/samsung_fimd.h>
+#include "map.h"
+#include "irqs.h"
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "gpio-samsung.h"
+#include "fb.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct pwm_lookup hmt_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(struct device *dev, int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &samsung_device_pwm.dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode hmt_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 13,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.vtiming	= &hmt_lcd_timing,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&samsung_device_pwm,
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_nand_set_platdata(&hmt_nand_info);
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
new file mode 100644
index 000000000..16859bb3b
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2007 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <video/ili9320.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include <linux/platform_data/fb-s3c2410.h>
+#include "gpio-samsung.h"
+
+#include <asm/mach-types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include "s3c24xx.h"
+#include "s3c2412-power.h"
+
+static struct map_desc jive_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg jive_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* Jive flash assignment
+ *
+ * 0x00000000-0x00028000 : uboot
+ * 0x00028000-0x0002c000 : uboot env
+ * 0x0002c000-0x00030000 : spare
+ * 0x00030000-0x00200000 : zimage A
+ * 0x00200000-0x01600000 : cramfs A
+ * 0x01600000-0x017d0000 : zimage B
+ * 0x017d0000-0x02bd0000 : cramfs B
+ * 0x02bd0000-0x03fd0000 : yaffs
+ */
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+	/* Don't allow access to the bootloader from linux */
+	{
+		.name           = "uboot",
+		.offset         = 0,
+		.size           = (160 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+
+	/* spare */
+        {
+                .name           = "spare",
+                .offset         = (176 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+#endif
+
+	/* booted images */
+        {
+		.name		= "kernel (ro)",
+		.offset		= (192 * SZ_1K),
+		.size		= (SZ_2M) - (192 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+        }, {
+                .name           = "root (ro)",
+                .offset         = (SZ_2M),
+                .size           = (20 * SZ_1M),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+        },
+
+	/* yaffs */
+	{
+		.name		= "yaffs",
+		.offset		= (44 * SZ_1M),
+		.size		= (20 * SZ_1M),
+	},
+
+	/* bootloader environment */
+	{
+                .name		= "env",
+		.offset		= (160 * SZ_1K),
+		.size		= (16 * SZ_1K),
+	},
+
+	/* upgrade images */
+        {
+		.name		= "zimage",
+		.offset		= (22 * SZ_1M),
+		.size		= (2 * SZ_1M) - (192 * SZ_1K),
+        }, {
+		.name		= "cramfs",
+		.offset		= (24 * SZ_1M) - (192*SZ_1K),
+		.size		= (20 * SZ_1M),
+        },
+};
+
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+	/* Don't allow access to the bootloader from linux */
+	{
+		.name           = "uboot",
+		.offset         = 0,
+		.size           = (160 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+
+	/* spare */
+        {
+                .name           = "spare",
+                .offset         = (176 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+#endif
+
+	/* booted images */
+        {
+		.name           = "kernel (ro)",
+		.offset         = (22 * SZ_1M),
+		.size           = (2 * SZ_1M) - (192 * SZ_1K),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+        },
+	{
+		.name		= "root (ro)",
+		.offset		= (24 * SZ_1M) - (192 * SZ_1K),
+                .size		= (20 * SZ_1M),
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+
+	/* yaffs */
+	{
+		.name		= "yaffs",
+		.offset		= (44 * SZ_1M),
+		.size		= (20 * SZ_1M),
+        },
+
+	/* bootloader environment */
+	{
+		.name		= "env",
+		.offset		= (160 * SZ_1K),
+		.size		= (16 * SZ_1K),
+	},
+
+	/* upgrade images */
+	{
+		.name		= "zimage",
+		.offset		= (192 * SZ_1K),
+		.size		= (2 * SZ_1M) - (192 * SZ_1K),
+        }, {
+		.name		= "cramfs",
+		.offset		= (2 * SZ_1M),
+		.size		= (20 * SZ_1M),
+        },
+};
+
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
+	[0] = {
+		.name           = "flash",
+		.nr_chips       = 1,
+		.nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
+		.partitions     = jive_imageA_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
+	/* set taken from osiris nand timings, possibly still conservative */
+	.tacls		= 30,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.sets		= jive_nand_sets,
+	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static int __init jive_mtdset(char *options)
+{
+	struct s3c2410_nand_set *nand = &jive_nand_sets[0];
+	unsigned long set;
+
+	if (options == NULL || options[0] == '\0')
+		return 1;
+
+	if (kstrtoul(options, 10, &set)) {
+		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
+		return 1;
+	}
+
+	switch (set) {
+	case 1:
+		nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
+		nand->partitions = jive_imageB_nand_part;
+		break;
+	case 0:
+		/* this is already setup in the nand info */
+		break;
+	default:
+		printk(KERN_ERR "Unknown mtd set %ld specified,"
+		       "using default.", set);
+	}
+
+	return 1;
+}
+
+/* parse the mtdset= option given to the kernel command line */
+__setup("mtdset=", jive_mtdset);
+
+/* LCD timing and setup */
+
+#define LCD_XRES	 (240)
+#define LCD_YRES	 (320)
+#define LCD_LEFT_MARGIN  (12)
+#define LCD_RIGHT_MARGIN (12)
+#define LCD_LOWER_MARGIN (12)
+#define LCD_UPPER_MARGIN (12)
+#define LCD_VSYNC	 (2)
+#define LCD_HSYNC	 (2)
+
+#define LCD_REFRESH	 (60)
+
+#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
+#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
+
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
+	[0] = {
+		.width		= LCD_XRES,
+		.height		= LCD_YRES,
+		.xres		= LCD_XRES,
+		.yres		= LCD_YRES,
+		.left_margin	= LCD_LEFT_MARGIN,
+		.right_margin	= LCD_RIGHT_MARGIN,
+		.upper_margin	= LCD_UPPER_MARGIN,
+		.lower_margin	= LCD_LOWER_MARGIN,
+		.hsync_len	= LCD_HSYNC,
+		.vsync_len	= LCD_VSYNC,
+
+		.pixclock	= (1000000000000LL /
+				   (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
+
+		.bpp		= 16,
+		.type		= (S3C2410_LCDCON1_TFT16BPP |
+				   S3C2410_LCDCON1_TFT),
+
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_INVVDEN |
+				   S3C2410_LCDCON5_PWREN),
+	},
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info jive_lcd_config = {
+	.displays	 = jive_vgg2432a4_display,
+	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
+	.default_display = 0,
+
+	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+	 * and disable the pull down resistors on pins we are using for LCD
+	 * data. */
+
+	.gpcup		= (0xf << 1) | (0x3f << 10),
+	.gpcup_reg	= S3C2410_GPCUP,
+
+	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
+			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
+			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
+			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
+
+	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
+			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
+			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+	.gpccon_reg	= S3C2410_GPCCON,
+
+	.gpdup		= (0x3f << 2) | (0x3f << 10),
+
+	.gpdup_reg	= S3C2410_GPDUP,
+
+	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
+			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
+			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
+			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
+			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
+			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
+			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+	.gpdcon_reg	= S3C2410_GPDCON,
+};
+
+/* ILI9320 support. */
+
+static void jive_lcm_reset(unsigned int set)
+{
+	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
+
+	gpio_set_value(S3C2410_GPG(13), set);
+}
+
+#undef LCD_UPPER_MARGIN
+#define LCD_UPPER_MARGIN 2
+
+static struct ili9320_platdata jive_lcm_config = {
+	.hsize		= LCD_XRES,
+	.vsize		= LCD_YRES,
+
+	.reset		= jive_lcm_reset,
+	.suspend	= ILI9320_SUSPEND_DEEP,
+
+	.entry_mode	= ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+	.display2	= (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
+			   ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
+	.display3	= 0x0,
+	.display4	= 0x0,
+	.rgb_if1	= (ILI9320_RGBIF1_RIM_RGB18 |
+			   ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
+	.rgb_if2	= ILI9320_RGBIF2_DPL,
+	.interface2	= 0x0,
+	.interface3	= 0x3,
+	.interface4	= (ILI9320_INTERFACE4_RTNE(16) |
+			   ILI9320_INTERFACE4_DIVE(1)),
+	.interface5	= 0x0,
+	.interface6	= 0x0,
+};
+
+/* LCD SPI support */
+
+static struct spi_gpio_platform_data jive_lcd_spi = {
+	.num_chipselect	= 1,
+};
+
+static struct platform_device jive_device_lcdspi = {
+	.name		= "spi_gpio",
+	.id		= 1,
+	.dev.platform_data = &jive_lcd_spi,
+};
+
+static struct gpiod_lookup_table jive_lcdspi_gpiod_table = {
+	.dev_id         = "spi_gpio",
+	.table          = {
+		GPIO_LOOKUP("GPIOG", 8,
+			    "sck", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOB", 8,
+			    "mosi", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOB", 7,
+			    "cs", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* WM8750 audio code SPI definition */
+
+static struct spi_gpio_platform_data jive_wm8750_spi = {
+	.num_chipselect	= 1,
+};
+
+static struct platform_device jive_device_wm8750 = {
+	.name		= "spi_gpio",
+	.id		= 2,
+	.dev.platform_data = &jive_wm8750_spi,
+};
+
+static struct gpiod_lookup_table jive_wm8750_gpiod_table = {
+	.dev_id         = "spi_gpio",
+	.table          = {
+		GPIO_LOOKUP("GPIOB", 4,
+			    "sck", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOB", 9,
+			    "mosi", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOH", 10,
+			    "cs", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* JIVE SPI devices. */
+
+static struct spi_board_info __initdata jive_spi_devs[] = {
+	[0] = {
+		.modalias	= "VGG2432A4",
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_3,	/* CPOL=1, CPHA=1 */
+		.max_speed_hz	= 100000,
+		.platform_data	= &jive_lcm_config,
+	}, {
+		.modalias	= "WM8750",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,	/* CPOL=0, CPHA=0 */
+		.max_speed_hz	= 100000,
+	},
+};
+
+/* I2C bus and device configuration. */
+
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
+	.frequency	= 80 * 1000,
+	.flags		= S3C_IICFLG_FILTER,
+	.sda_delay	= 2,
+};
+
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
+	[0] = {
+		I2C_BOARD_INFO("lis302dl", 0x1c),
+		.irq	= IRQ_EINT14,
+	},
+};
+
+/* The platform devices being used. */
+
+static struct platform_device *jive_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_lcd,
+	&jive_device_lcdspi,
+	&jive_device_wm8750,
+	&s3c_device_nand,
+	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
+};
+
+static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
+};
+
+static struct gpiod_lookup_table jive_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* Jive power management device */
+
+#ifdef CONFIG_PM
+static int jive_pm_suspend(void)
+{
+	/* Write the magic value u-boot uses to check for resume into
+	 * the INFORM0 register, and ensure INFORM1 is set to the
+	 * correct address to resume from. */
+
+	__raw_writel(0x2BED, S3C2412_INFORM0);
+	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
+
+	return 0;
+}
+
+static void jive_pm_resume(void)
+{
+	__raw_writel(0x0, S3C2412_INFORM0);
+}
+
+#else
+#define jive_pm_suspend NULL
+#define jive_pm_resume NULL
+#endif
+
+static struct syscore_ops jive_pm_syscore_ops = {
+	.suspend	= jive_pm_suspend,
+	.resume		= jive_pm_resume,
+};
+
+static void __init jive_map_io(void)
+{
+	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
+	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init jive_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void jive_power_off(void)
+{
+	printk(KERN_INFO "powering system down...\n");
+
+	gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPC(5));
+}
+
+static void __init jive_machine_init(void)
+{
+	/* register system core operations for managing low level suspend */
+
+	register_syscore_ops(&jive_pm_syscore_ops);
+
+	/* write our sleep configurations for the IO. Pull down all unused
+	 * IO, ensure that we have turned off all peripherals we do not
+	 * need, and configure the ones we do need. */
+
+	/* Port B sleep */
+
+	__raw_writel(S3C2412_SLPCON_IN(0)   |
+		     S3C2412_SLPCON_PULL(1) |
+		     S3C2412_SLPCON_HIGH(2) |
+		     S3C2412_SLPCON_PULL(3) |
+		     S3C2412_SLPCON_PULL(4) |
+		     S3C2412_SLPCON_PULL(5) |
+		     S3C2412_SLPCON_PULL(6) |
+		     S3C2412_SLPCON_HIGH(7) |
+		     S3C2412_SLPCON_PULL(8) |
+		     S3C2412_SLPCON_PULL(9) |
+		     S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
+
+	/* Port C sleep */
+
+	__raw_writel(S3C2412_SLPCON_PULL(0) |
+		     S3C2412_SLPCON_PULL(1) |
+		     S3C2412_SLPCON_PULL(2) |
+		     S3C2412_SLPCON_PULL(3) |
+		     S3C2412_SLPCON_PULL(4) |
+		     S3C2412_SLPCON_PULL(5) |
+		     S3C2412_SLPCON_LOW(6)  |
+		     S3C2412_SLPCON_PULL(6) |
+		     S3C2412_SLPCON_PULL(7) |
+		     S3C2412_SLPCON_PULL(8) |
+		     S3C2412_SLPCON_PULL(9) |
+		     S3C2412_SLPCON_PULL(10) |
+		     S3C2412_SLPCON_PULL(11) |
+		     S3C2412_SLPCON_PULL(12) |
+		     S3C2412_SLPCON_PULL(13) |
+		     S3C2412_SLPCON_PULL(14) |
+		     S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
+
+	/* Port D sleep */
+
+	__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
+
+	/* Port F sleep */
+
+	__raw_writel(S3C2412_SLPCON_LOW(0)  |
+		     S3C2412_SLPCON_LOW(1)  |
+		     S3C2412_SLPCON_LOW(2)  |
+		     S3C2412_SLPCON_EINT(3) |
+		     S3C2412_SLPCON_EINT(4) |
+		     S3C2412_SLPCON_EINT(5) |
+		     S3C2412_SLPCON_EINT(6) |
+		     S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
+
+	/* Port G sleep */
+
+	__raw_writel(S3C2412_SLPCON_IN(0)    |
+		     S3C2412_SLPCON_IN(1)    |
+		     S3C2412_SLPCON_IN(2)    |
+		     S3C2412_SLPCON_IN(3)    |
+		     S3C2412_SLPCON_IN(4)    |
+		     S3C2412_SLPCON_IN(5)    |
+		     S3C2412_SLPCON_IN(6)    |
+		     S3C2412_SLPCON_IN(7)    |
+		     S3C2412_SLPCON_PULL(8)  |
+		     S3C2412_SLPCON_PULL(9)  |
+		     S3C2412_SLPCON_IN(10)   |
+		     S3C2412_SLPCON_PULL(11) |
+		     S3C2412_SLPCON_PULL(12) |
+		     S3C2412_SLPCON_PULL(13) |
+		     S3C2412_SLPCON_IN(14)   |
+		     S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
+
+	/* Port H sleep */
+
+	__raw_writel(S3C2412_SLPCON_PULL(0) |
+		     S3C2412_SLPCON_PULL(1) |
+		     S3C2412_SLPCON_PULL(2) |
+		     S3C2412_SLPCON_PULL(3) |
+		     S3C2412_SLPCON_PULL(4) |
+		     S3C2412_SLPCON_PULL(5) |
+		     S3C2412_SLPCON_PULL(6) |
+		     S3C2412_SLPCON_IN(7)   |
+		     S3C2412_SLPCON_IN(8)   |
+		     S3C2412_SLPCON_PULL(9) |
+		     S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
+
+	/* initialise the power management now we've setup everything. */
+
+	s3c_pm_init();
+
+	/** TODO - check that this is after the cmdline option! */
+	s3c_nand_set_platdata(&jive_nand_info);
+
+	gpio_request(S3C2410_GPG(13), "lcm reset");
+	gpio_direction_output(S3C2410_GPG(13), 0);
+
+	gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
+	gpio_free(S3C2410_GPB(6));
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	s3c24xx_udc_set_platdata(&jive_udc_cfg);
+	s3c24xx_fb_set_platdata(&jive_lcd_config);
+
+	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
+
+	s3c_i2c0_set_platdata(&jive_i2c_cfg);
+	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
+
+	pm_power_off = jive_power_off;
+
+	gpiod_add_lookup_table(&jive_udc_gpio_table);
+	gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
+	gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
+	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
+}
+
+MACHINE_START(JIVE, "JIVE")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
+	.init_irq	= s3c2412_init_irq,
+	.map_io		= jive_map_io,
+	.init_machine	= jive_machine_init,
+	.init_time	= jive_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
new file mode 100644
index 000000000..283be70ca
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -0,0 +1,804 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+//      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+//      and modifications by SBZ <sbz@spgui.org> and
+//      Weibing <http://weibing.blogbus.com> and
+//      Michel Pollet <buserror@gmail.com>
+//
+// For product information, visit https://code.google.com/p/mini2440/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/dm9000.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include <linux/platform_data/leds-s3c24xx.h>
+#include "irqs.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+
+#include <sound/s3c24xx_uda134x.h>
+
+#include "s3c24xx.h"
+
+#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
+
+static struct map_desc mini2440_iodesc[] __initdata = {
+	/* nothing to declare, move along */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+
+static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+};
+
+/* USB device UDC support */
+
+static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
+};
+
+static struct gpiod_lookup_table mini2440_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* LCD timing and setup */
+
+/*
+ * This macro simplifies the table bellow
+ */
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+			_yres, margin_top, margin_bottom, vsync, refresh) \
+	.width = _xres, \
+	.xres = _xres, \
+	.height = _yres, \
+	.yres = _yres, \
+	.left_margin	= margin_left,	\
+	.right_margin	= margin_right,	\
+	.upper_margin	= margin_top,	\
+	.lower_margin	= margin_bottom,	\
+	.hsync_len	= hsync,	\
+	.vsync_len	= vsync,	\
+	.pixclock	= ((_clock*100000000000LL) /	\
+			   ((refresh) * \
+			   (hsync + margin_left + _xres + margin_right) * \
+			   (vsync + margin_top + _yres + margin_bottom))), \
+	.bpp		= 16,\
+	.type		= (S3C2410_LCDCON1_TFT16BPP |\
+			   S3C2410_LCDCON1_TFT)
+
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
+		_LCD_DECLARE(
+			7,			/* The 3.5 is quite fast */
+			240, 21, 38, 6,		/* x timing */
+			320, 4, 4, 2,		/* y timing */
+			60),			/* refresh rate */
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_INVVDEN |
+				   S3C2410_LCDCON5_PWREN),
+	},
+	[1] = { /* mini2440 + 7" TFT + touchscreen */
+		_LCD_DECLARE(
+			10,			/* the 7" runs slower */
+			800, 40, 40, 48,	/* x timing */
+			480, 29, 3, 3,		/* y timing */
+			50),			/* refresh rate */
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_PWREN),
+	},
+	/* The VGA shield can outout at several resolutions. All share
+	 * the same timings, however, anything smaller than 1024x768
+	 * will only be displayed in the top left corner of a 1024x768
+	 * XGA output unless you add optional dip switches to the shield.
+	 * Therefore timings for other resolutions have been omitted here.
+	 */
+	[2] = {
+		_LCD_DECLARE(
+			10,
+			1024, 1, 2, 2,		/* y timing */
+			768, 200, 16, 16,	/* x timing */
+			24),	/* refresh rate, maximum stable,
+				 * tested with the FPGA shield
+				 */
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_HWSWP),
+	},
+	/* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
+	[3] = {
+		_LCD_DECLARE(
+			/* clock */
+			7,
+			/* xres, margin_right, margin_left, hsync */
+			320, 68, 66, 4,
+			/* yres, margin_top, margin_bottom, vsync */
+			240, 4, 4, 9,
+			/* refresh rate */
+			60),
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVDEN |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVCLK |
+				   S3C2410_LCDCON5_HWSWP),
+	},
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
+	.num_displays	 = 1,
+	.default_display = 0,
+
+	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+	 * and disable the pull down resistors on pins we are using for LCD
+	 * data.
+	 */
+
+	.gpcup		= (0xf << 1) | (0x3f << 10),
+
+	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
+			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
+			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
+			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
+
+	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
+			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
+			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+	.gpccon_reg	= S3C2410_GPCCON,
+	.gpcup_reg	= S3C2410_GPCUP,
+
+	.gpdup		= (0x3f << 2) | (0x3f << 10),
+
+	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
+			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
+			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
+			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
+			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
+			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
+			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+	.gpdcon_reg	= S3C2410_GPDCON,
+	.gpdup_reg	= S3C2410_GPDUP,
+};
+
+/* MMC/SD  */
+
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+	.wprotect_invert	= 1,
+	.set_power		= s3c24xx_mci_def_set_power,
+	.ocr_avail		= MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPG(8) */
+		GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPH(8) */
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* NAND Flash on MINI2440 board */
+
+static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+	[0] = {
+		.name	= "u-boot",
+		.size	= SZ_256K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "u-boot-env",
+		.size	= SZ_128K,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "kernel",
+		/* 5 megabytes, for a kernel with no modules
+		 * or a uImage with a ramdisk attached
+		 */
+		.size	= 0x00500000,
+		.offset	= SZ_256K + SZ_128K,
+	},
+	[3] = {
+		.name	= "root",
+		.offset	= SZ_256K + SZ_128K + 0x00500000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
+		.partitions	= mini2440_default_nand_part,
+		.flash_bbt	= 1, /* we use u-boot to create a BBT */
+	},
+};
+
+static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
+	.sets		= mini2440_nand_sets,
+	.ignore_unset_ecc = 1,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini2440_dm9k_resource[] = {
+	[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
+	[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
+						| IORESOURCE_IRQ_HIGHEDGE),
+};
+
+/*
+ * The DM9000 has no eeprom, and it's MAC address is set by
+ * the bootloader before starting the kernel.
+ */
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini2440_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
+	.resource	= mini2440_dm9k_resource,
+	.dev		= {
+		.platform_data	= &mini2440_dm9k_pdata,
+	},
+};
+
+/*  CON5
+ *	+--+	 /-----\
+ *	|  |    |	|
+ *	|  |	|  BAT	|
+ *	|  |	 \_____/
+ *	|  |
+ *	|  |  +----+  +----+
+ *	|  |  | K5 |  | K1 |
+ *	|  |  +----+  +----+
+ *	|  |  +----+  +----+
+ *	|  |  | K4 |  | K2 |
+ *	|  |  +----+  +----+
+ *	|  |  +----+  +----+
+ *	|  |  | K6 |  | K3 |
+ *	|  |  +----+  +----+
+ *	  .....
+ */
+static struct gpio_keys_button mini2440_buttons[] = {
+	{
+		.gpio		= S3C2410_GPG(0),		/* K1 */
+		.code		= KEY_F1,
+		.desc		= "Button 1",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(3),		/* K2 */
+		.code		= KEY_F2,
+		.desc		= "Button 2",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(5),		/* K3 */
+		.code		= KEY_F3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(6),		/* K4 */
+		.code		= KEY_POWER,
+		.desc		= "Power",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(7),		/* K5 */
+		.code		= KEY_F5,
+		.desc		= "Button 5",
+		.active_low	= 1,
+	},
+#if 0
+	/* this pin is also known as TCLK1 and seems to already
+	 * marked as "in use" somehow in the kernel -- possibly wrongly
+	 */
+	{
+		.gpio		= S3C2410_GPG(11),	/* K6 */
+		.code		= KEY_F6,
+		.desc		= "Button 6",
+		.active_low	= 1,
+	},
+#endif
+};
+
+static struct gpio_keys_platform_data mini2440_button_data = {
+	.buttons	= mini2440_buttons,
+	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
+};
+
+static struct platform_device mini2440_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mini2440_button_data,
+	}
+};
+
+/* LEDS */
+
+static struct gpiod_lookup_table mini2440_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.4",
+	.table = {
+		GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
+	.dev_id = "s3c24xx_led.5",
+	.table = {
+		GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
+	.name		= "led1",
+	.def_trigger	= "heartbeat",
+};
+
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
+	.name		= "led2",
+	.def_trigger	= "nand-disk",
+};
+
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
+	.name		= "led3",
+	.def_trigger	= "mmc0",
+};
+
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
+	.name		= "led4",
+	.def_trigger	= "",
+};
+
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
+	.name		= "backlight",
+	.def_trigger	= "backlight",
+};
+
+static struct platform_device mini2440_led1 = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &mini2440_led1_pdata,
+	},
+};
+
+static struct platform_device mini2440_led2 = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &mini2440_led2_pdata,
+	},
+};
+
+static struct platform_device mini2440_led3 = {
+	.name		= "s3c24xx_led",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &mini2440_led3_pdata,
+	},
+};
+
+static struct platform_device mini2440_led4 = {
+	.name		= "s3c24xx_led",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &mini2440_led4_pdata,
+	},
+};
+
+static struct platform_device mini2440_led_backlight = {
+	.name		= "s3c24xx_led",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &mini2440_led_backlight_pdata,
+	},
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
+	.l3_clk = S3C2410_GPB(4),
+	.l3_mode = S3C2410_GPB(2),
+	.l3_data = S3C2410_GPB(3),
+	.model = UDA134X_UDA1341
+};
+
+static struct platform_device mini2440_audio = {
+	.name		= "s3c24xx_uda134x",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mini2440_audio_pins,
+	},
+};
+
+/*
+ * I2C devices
+ */
+static const struct property_entry mini2440_at24_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 16),
+	{ }
+};
+
+static const struct software_node mini2440_at24_node = {
+	.properties = mini2440_at24_properties,
+};
+
+static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("24c08", 0x50),
+		.swnode = &mini2440_at24_node,
+	},
+};
+
+static struct uda134x_platform_data s3c24xx_uda134x = {
+	.l3 = {
+		.gpio_clk = S3C2410_GPB(4),
+		.gpio_data = S3C2410_GPB(3),
+		.gpio_mode = S3C2410_GPB(2),
+		.use_gpios = 1,
+		.data_hold = 1,
+		.data_setup = 1,
+		.clock_high = 1,
+		.mode_hold = 1,
+		.mode = 1,
+		.mode_setup = 1,
+	},
+	.model = UDA134X_UDA1341,
+};
+
+static struct platform_device uda1340_codec = {
+		.name = "uda134x-codec",
+		.id = -1,
+		.dev = {
+			.platform_data	= &s3c24xx_uda134x,
+		},
+};
+
+static struct platform_device *mini2440_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+	&mini2440_device_eth,
+	&mini2440_led1,
+	&mini2440_led2,
+	&mini2440_led3,
+	&mini2440_led4,
+	&mini2440_button_device,
+	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c2440_device_dma,
+	&s3c_device_iis,
+	&uda1340_codec,
+	&mini2440_audio,
+};
+
+static void __init mini2440_map_io(void)
+{
+	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
+	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init mini2440_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+/*
+ * mini2440_features string
+ *
+ * t = Touchscreen present
+ * b = backlight control
+ * c = camera [TODO]
+ * 0-9 LCD configuration
+ *
+ */
+static char mini2440_features_str[12] __initdata = "0tb";
+
+static int __init mini2440_features_setup(char *str)
+{
+	if (str)
+		strscpy(mini2440_features_str, str,
+			sizeof(mini2440_features_str));
+	return 1;
+}
+
+__setup("mini2440=", mini2440_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+#define FEATURE_BACKLIGHT (1 << 1)
+#define FEATURE_TOUCH (1 << 2)
+#define FEATURE_CAMERA (1 << 3)
+
+struct mini2440_features_t {
+	int count;
+	int done;
+	int lcd_index;
+	struct platform_device *optional[8];
+};
+
+static void __init mini2440_parse_features(
+		struct mini2440_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->count = 0;
+	features->done = 0;
+	features->lcd_index = -1;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				pr_info("MINI2440: '%c' ignored, screen type already set\n",
+					f);
+			} else {
+				int li = f - '0';
+
+				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
+					pr_info("MINI2440: '%c' out of range LCD mode\n",
+						f);
+				else {
+					features->optional[features->count++] =
+							&s3c_device_lcd;
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		case 'b':
+			if (features->done & FEATURE_BACKLIGHT)
+				pr_info("MINI2440: '%c' ignored, backlight already set\n",
+					f);
+			else {
+				features->optional[features->count++] =
+						&mini2440_led_backlight;
+			}
+			features->done |= FEATURE_BACKLIGHT;
+			break;
+		case 't':
+			pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
+				f);
+			break;
+		case 'c':
+			if (features->done & FEATURE_CAMERA)
+				pr_info("MINI2440: '%c' ignored, camera already registered\n",
+					f);
+			else
+				features->optional[features->count++] =
+					&s3c_device_camif;
+			features->done |= FEATURE_CAMERA;
+			break;
+		}
+	}
+}
+
+static void __init mini2440_init(void)
+{
+	struct mini2440_features_t features = { 0 };
+	int i;
+
+	pr_info("MINI2440: Option string mini2440=%s\n",
+			mini2440_features_str);
+
+	/* Parse the feature string */
+	mini2440_parse_features(&features, mini2440_features_str);
+
+	/* turn LCD on */
+	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+
+	/* Turn the backlight early on */
+	WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
+	gpio_free(S3C2410_GPG(4));
+
+	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+	gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+	gpio_free(S3C2410_GPB(1));
+
+	/* mark the key as input, without pullups (there is one on the board) */
+	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
+		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
+	}
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	if (features.lcd_index != -1) {
+		int li;
+
+		mini2440_fb_info.displays =
+			&mini2440_lcd_cfg[features.lcd_index];
+
+		pr_info("MINI2440: LCD");
+		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
+			if (li == features.lcd_index)
+				pr_cont(" [%d:%dx%d]", li,
+					mini2440_lcd_cfg[li].width,
+					mini2440_lcd_cfg[li].height);
+			else
+				pr_cont(" %d:%dx%d", li,
+					mini2440_lcd_cfg[li].width,
+					mini2440_lcd_cfg[li].height);
+		pr_cont("\n");
+		s3c24xx_fb_set_platdata(&mini2440_fb_info);
+	}
+
+	gpiod_add_lookup_table(&mini2440_udc_gpio_table);
+	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
+	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
+	s3c_nand_set_platdata(&mini2440_nand_info);
+	s3c_i2c0_set_platdata(NULL);
+
+	i2c_register_board_info(0, mini2440_i2c_devs,
+				ARRAY_SIZE(mini2440_i2c_devs));
+
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&mini2440_led1_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led2_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led3_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led4_gpio_table);
+	gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
+
+	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
+
+	if (features.count)	/* the optional features */
+		platform_add_devices(features.optional, features.count);
+
+}
+
+
+MACHINE_START(MINI2440, "MINI2440")
+	/* Maintainer: Michel Pollet <buserror@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= mini2440_map_io,
+	.init_machine	= mini2440_init,
+	.init_irq	= s3c2440_init_irq,
+	.init_time	= mini2440_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
new file mode 100644
index 000000000..058ae9e8b
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-mini6410.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include <linux/soc/samsung/s3c-adc.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include "sdhci.h"
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include "irqs.h"
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[1] = {
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[2] = {
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[3] = {
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini6410_dm9k_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini6410_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
+	.resource	= mini6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &mini6410_dm9k_pdata,
+	},
+};
+
+static struct mtd_partition mini6410_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[2] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set mini6410_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(mini6410_nand_part),
+		.partitions	= mini6410_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand mini6410_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
+	.sets		= mini6410_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 480,
+	.yres		= 272,
+};
+
+static struct fb_videomode mini6410_lcd_type0_timing = {
+	/* 4.3" 480x272 */
+	.left_margin	= 3,
+	.right_margin	= 2,
+	.upper_margin	= 1,
+	.lower_margin	= 1,
+	.hsync_len	= 40,
+	.vsync_len	= 1,
+	.xres		= 480,
+	.yres		= 272,
+};
+
+static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode mini6410_lcd_type1_timing = {
+	/* 7.0" 800x480 */
+	.left_margin	= 8,
+	.right_margin	= 13,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
+	{
+		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+		.vtiming	= &mini6410_lcd_type0_timing,
+		.win[0]		= &mini6410_lcd_type0_fb_win,
+		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	}, {
+		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+		.vtiming	= &mini6410_lcd_type1_timing,
+		.win[0]		= &mini6410_lcd_type1_fb_win,
+		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	},
+	{ },
+};
+
+static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(S3C64XX_GPE(0), 1);
+	else
+		gpio_direction_output(S3C64XX_GPE(0), 0);
+}
+
+static struct plat_lcd_data mini6410_lcd_power_data = {
+	.set_power	= mini6410_lcd_power_set,
+};
+
+static struct platform_device mini6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &mini6410_lcd_power_data,
+};
+
+static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C64XX_GPN(10),
+	.ext_cd_gpio_invert	= true,
+};
+
+static struct platform_device *mini6410_devices[] __initdata = {
+	&mini6410_device_eth,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_ohci,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&mini6410_lcd_powerdev,
+	&s3c_device_adc,
+};
+
+static void __init mini6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(NULL, 0);
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * mini6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char mini6410_features_str[12] __initdata = "0";
+
+static int __init mini6410_features_setup(char *str)
+{
+	if (str)
+		strscpy(mini6410_features_str, str,
+			sizeof(mini6410_features_str));
+	return 1;
+}
+
+__setup("mini6410=", mini6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct mini6410_features_t {
+	int done;
+	int lcd_index;
+};
+
+static void mini6410_parse_features(
+		struct mini6410_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->done = 0;
+	features->lcd_index = 0;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "MINI6410: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
+					printk(KERN_INFO "MINI6410: '%c' out "
+						"of range LCD mode\n", f);
+				else {
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		}
+	}
+}
+
+static void __init mini6410_machine_init(void)
+{
+	u32 cs1;
+	struct mini6410_features_t features = { 0 };
+
+	printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
+			mini6410_features_str);
+
+	/* Parse the feature string */
+	mini6410_parse_features(&features, mini6410_features_str);
+
+	printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
+		mini6410_lcd_pdata[features.lcd_index].win[0]->xres,
+		mini6410_lcd_pdata[features.lcd_index].win[0]->yres);
+
+	s3c_nand_set_platdata(&mini6410_nand_info);
+	s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
+	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
+	s3c64xx_ts_set_platdata(NULL);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+			S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+	gpio_request(S3C64XX_GPE(0), "LCD power");
+
+	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
+}
+
+MACHINE_START(MINI6410, "MINI6410")
+	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= mini6410_map_io,
+	.init_machine	= mini6410_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
new file mode 100644
index 000000000..90122fc6b
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-n30.c
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
+// Yakumo AlphaX and Airis NC05 PDAs.
+//
+// Copyright (c) 2003-2005 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
+//
+// There is a wiki with more information about the n30 port at
+// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+
+#include "hardware-s3c24xx.h"
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "cpu.h"
+#include "devs.h"
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include "s3c24xx.h"
+
+static struct map_desc n30_iodesc[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct s3c2410_uartcfg n30_uartcfgs[] = {
+	/* Normal serial port */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x2c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.uart_flags  = UPF_CONS_FLOW,
+		.ucon	     = 0x2c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	},
+	/* On the N30 the bluetooth controller is connected here.
+	 * On the N35 and variants the GPS receiver is connected here. */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x2c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
+};
+
+static struct gpiod_lookup_table n30_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpio_keys_button n30_buttons[] = {
+	{
+		.gpio		= S3C2410_GPF(0),
+		.code		= KEY_POWER,
+		.desc		= "Power",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(9),
+		.code		= KEY_UP,
+		.desc		= "Thumbwheel Up",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(8),
+		.code		= KEY_DOWN,
+		.desc		= "Thumbwheel Down",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(7),
+		.code		= KEY_ENTER,
+		.desc		= "Thumbwheel Press",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(7),
+		.code		= KEY_HOMEPAGE,
+		.desc		= "Home",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(6),
+		.code		= KEY_CALENDAR,
+		.desc		= "Calendar",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(5),
+		.code		= KEY_ADDRESSBOOK,
+		.desc		= "Contacts",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(4),
+		.code		= KEY_MAIL,
+		.desc		= "Mail",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data n30_button_data = {
+	.buttons	= n30_buttons,
+	.nbuttons	= ARRAY_SIZE(n30_buttons),
+};
+
+static struct platform_device n30_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &n30_button_data,
+	}
+};
+
+static struct gpio_keys_button n35_buttons[] = {
+	{
+		.gpio		= S3C2410_GPF(0),
+		.code		= KEY_POWER,
+		.type		= EV_PWR,
+		.desc		= "Power",
+		.active_low	= 0,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(9),
+		.code		= KEY_UP,
+		.desc		= "Joystick Up",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(8),
+		.code		= KEY_DOWN,
+		.desc		= "Joystick Down",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(6),
+		.code		= KEY_DOWN,
+		.desc		= "Joystick Left",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(5),
+		.code		= KEY_DOWN,
+		.desc		= "Joystick Right",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(7),
+		.code		= KEY_ENTER,
+		.desc		= "Joystick Press",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(7),
+		.code		= KEY_HOMEPAGE,
+		.desc		= "Home",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(6),
+		.code		= KEY_CALENDAR,
+		.desc		= "Calendar",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(5),
+		.code		= KEY_ADDRESSBOOK,
+		.desc		= "Contacts",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(4),
+		.code		= KEY_MAIL,
+		.desc		= "Mail",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPF(3),
+		.code		= SW_RADIO,
+		.desc		= "GPS Antenna",
+		.active_low	= 0,
+	},
+	{
+		.gpio		= S3C2410_GPG(2),
+		.code		= SW_HEADPHONE_INSERT,
+		.desc		= "Headphone",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data n35_button_data = {
+	.buttons	= n35_buttons,
+	.nbuttons	= ARRAY_SIZE(n35_buttons),
+};
+
+static struct platform_device n35_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &n35_button_data,
+	}
+};
+
+/* This is the bluetooth LED on the device. */
+
+static struct gpiod_lookup_table n30_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata n30_blue_led_pdata = {
+	.name		= "blue_led",
+	.def_trigger	= "",
+};
+
+/* This is the blue LED on the device. Originally used to indicate GPS activity
+ * by flashing. */
+
+static struct gpiod_lookup_table n35_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata n35_blue_led_pdata = {
+	.name		= "blue_led",
+	.def_trigger	= "",
+};
+
+/* This LED is driven by the battery microcontroller, and is blinking
+ * red, blinking green or solid green when the battery is low,
+ * charging or full respectively.  By driving GPD9 low, it's possible
+ * to force the LED to blink red, so call that warning LED.  */
+
+static struct gpiod_lookup_table n30_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata n30_warning_led_pdata = {
+	.name		= "warning_led",
+	.def_trigger	= "",
+};
+
+static struct gpiod_lookup_table n35_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata n35_warning_led_pdata = {
+	.name		= "warning_led",
+	.def_trigger	= "",
+};
+
+static struct platform_device n30_blue_led = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &n30_blue_led_pdata,
+	},
+};
+
+static struct platform_device n35_blue_led = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &n35_blue_led_pdata,
+	},
+};
+
+static struct platform_device n30_warning_led = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &n30_warning_led_pdata,
+	},
+};
+
+static struct platform_device n35_warning_led = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &n35_warning_led_pdata,
+	},
+};
+
+static struct s3c2410fb_display n30_display __initdata = {
+	.type		= S3C2410_LCDCON1_TFT,
+	.width		= 240,
+	.height		= 320,
+	.pixclock	= 170000,
+
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+	.left_margin	= 3,
+	.right_margin	= 40,
+	.hsync_len	= 40,
+	.upper_margin	= 2,
+	.lower_margin	= 3,
+	.vsync_len	= 2,
+
+	.lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
+};
+
+static struct s3c2410fb_mach_info n30_fb_info __initdata = {
+	.displays	= &n30_display,
+	.num_displays	= 1,
+	.default_display = 0,
+	.lpcsel		= 0x06,
+};
+
+static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
+{
+	s3c24xx_mci_def_set_power(power_mode, vdd);
+
+	switch (power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		gpio_set_value(S3C2410_GPG(4), 1);
+		break;
+	case MMC_POWER_OFF:
+	default:
+		gpio_set_value(S3C2410_GPG(4), 0);
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
+	.ocr_avail	= MMC_VDD_32_33,
+	.set_power	= n30_sdi_set_power,
+};
+
+static struct gpiod_lookup_table n30_mci_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPF(1) */
+		GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPG(10) */
+		GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
+		{ },
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+	},
+};
+
+static struct platform_device *n30_devices[] __initdata = {
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_ohci,
+	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+	&s3c_device_sdi,
+	&n30_button_device,
+	&n30_blue_led,
+	&n30_warning_led,
+};
+
+static struct platform_device *n35_devices[] __initdata = {
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+	&s3c_device_sdi,
+	&n35_button_device,
+	&n35_blue_led,
+	&n35_warning_led,
+};
+
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 10*1000,
+};
+
+/* Lots of hardcoded stuff, but it sets up the hardware in a useful
+ * state so that we can boot Linux directly from flash. */
+static void __init n30_hwinit(void)
+{
+	/* GPA0-11 special functions -- unknown what they do
+	 * GPA12 N30 special function -- unknown what it does
+	 *       N35/PiN output -- unknown what it does
+	 *
+	 * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
+	 * don't think it does anything useful on the N30, so I ought
+	 * to make it an output there too since it always driven to 0
+	 * as far as I can tell. */
+	if (machine_is_n30())
+		__raw_writel(0x007fffff, S3C2410_GPACON);
+	if (machine_is_n35())
+		__raw_writel(0x007fefff, S3C2410_GPACON);
+	__raw_writel(0x00000000, S3C2410_GPADAT);
+
+	/* GPB0 TOUT0 backlight level
+	 * GPB1 output 1=backlight on
+	 * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
+	 * GPB3 output USB D+ pull up 0=disabled, 1=enabled
+	 * GPB4 N30 output -- unknown function
+	 *      N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
+	 * GPB5 output -- unknown function
+	 * GPB6 input -- unknown function
+	 * GPB7 output -- unknown function
+	 * GPB8 output -- probably LCD driver enable
+	 * GPB9 output -- probably LCD VSYNC driver enable
+	 * GPB10 output -- probably LCD HSYNC driver enable
+	 */
+	__raw_writel(0x00154556, S3C2410_GPBCON);
+	__raw_writel(0x00000750, S3C2410_GPBDAT);
+	__raw_writel(0x00000073, S3C2410_GPBUP);
+
+	/* GPC0 input RS232 DCD/DSR/RI
+	 * GPC1 LCD
+	 * GPC2 output RS232 DTR?
+	 * GPC3 input RS232 DCD/DSR/RI
+	 * GPC4 LCD
+	 * GPC5 output 0=NAND write enabled, 1=NAND write protect
+	 * GPC6 input -- unknown function
+	 * GPC7 input charger status 0=charger connected
+	 *      this input can be triggered by power on the USB device
+	 *      port too, but will go back to disconnected soon after.
+	 * GPC8 N30/N35 output -- unknown function, always driven to 1
+	 *      PiN input -- unknown function, always read as 1
+	 *      Make it an input with a pull up for all models.
+	 * GPC9-15 LCD
+	 */
+	__raw_writel(0xaaa80618, S3C2410_GPCCON);
+	__raw_writel(0x0000014c, S3C2410_GPCDAT);
+	__raw_writel(0x0000fef2, S3C2410_GPCUP);
+
+	/* GPD0 input -- unknown function
+	 * GPD1-D7 LCD
+	 * GPD8 N30 output -- unknown function
+	 *      N35/PiN output 1=GPS LED on
+	 * GPD9 output 0=power led blinks red, 1=normal power led function
+	 * GPD10 output -- unknown function
+	 * GPD11-15 LCD drivers
+	 */
+	__raw_writel(0xaa95aaa4, S3C2410_GPDCON);
+	__raw_writel(0x00000601, S3C2410_GPDDAT);
+	__raw_writel(0x0000fbfe, S3C2410_GPDUP);
+
+	/* GPE0-4 I2S audio bus
+	 * GPE5-10 SD/MMC bus
+	 * E11-13 outputs -- unknown function, probably power management
+	 * E14-15 I2C bus connected to the battery controller
+	 */
+	__raw_writel(0xa56aaaaa, S3C2410_GPECON);
+	__raw_writel(0x0000efc5, S3C2410_GPEDAT);
+	__raw_writel(0x0000f81f, S3C2410_GPEUP);
+
+	/* GPF0  input 0=power button pressed
+	 * GPF1  input SD/MMC switch 0=card present
+	 * GPF2  N30 1=reset button pressed (inverted compared to the rest)
+	 *	 N35/PiN 0=reset button pressed
+	 * GPF3  N30/PiN input -- unknown function
+	 *       N35 input GPS antenna position, 0=antenna closed, 1=open
+	 * GPF4  input 0=button 4 pressed
+	 * GPF5  input 0=button 3 pressed
+	 * GPF6  input 0=button 2 pressed
+	 * GPF7  input 0=button 1 pressed
+	 */
+	__raw_writel(0x0000aaaa, S3C2410_GPFCON);
+	__raw_writel(0x00000000, S3C2410_GPFDAT);
+	__raw_writel(0x000000ff, S3C2410_GPFUP);
+
+	/* GPG0  input RS232 DCD/DSR/RI
+	 * GPG1  input 1=USB gadget port has power from a host
+	 * GPG2  N30 input -- unknown function
+	 *       N35/PiN input 0=headphones plugged in, 1=not plugged in
+	 * GPG3  N30 output -- unknown function
+	 *       N35/PiN input with unknown function
+	 * GPG4  N30 output 0=MMC enabled, 1=MMC disabled
+	 * GPG5  N30 output 0=BlueTooth chip disabled, 1=enabled
+	 *       N35/PiN input joystick right
+	 * GPG6  N30 output 0=blue led on, 1=off
+	 *       N35/PiN input joystick left
+	 * GPG7  input 0=thumbwheel pressed
+	 * GPG8  input 0=thumbwheel down
+	 * GPG9  input 0=thumbwheel up
+	 * GPG10 input SD/MMC write protect switch
+	 * GPG11 N30 input -- unknown function
+	 *       N35 output 0=GPS antenna powered, 1=not powered
+	 *       PiN output -- unknown function
+	 * GPG12-15 touch screen functions
+	 *
+	 * The pullups differ between the models, so enable all
+	 * pullups that are enabled on any of the models.
+	 */
+	if (machine_is_n30())
+		__raw_writel(0xff0a956a, S3C2410_GPGCON);
+	if (machine_is_n35())
+		__raw_writel(0xff4aa92a, S3C2410_GPGCON);
+	__raw_writel(0x0000e800, S3C2410_GPGDAT);
+	__raw_writel(0x0000f86f, S3C2410_GPGUP);
+
+	/* GPH0/1/2/3 RS232 serial port
+	 * GPH4/5 IrDA serial port
+	 * GPH6/7  N30 BlueTooth serial port
+	 *         N35/PiN GPS receiver
+	 * GPH8 input -- unknown function
+	 * GPH9 CLKOUT0 HCLK -- unknown use
+	 * GPH10 CLKOUT1 FCLK -- unknown use
+	 *
+	 * The pull ups for H6/H7 are enabled on N30 but not on the
+	 * N35/PiN.  I suppose is useful for a budget model of the N30
+	 * with no bluetooth.  It doesn't hurt to have the pull ups
+	 * enabled on the N35, so leave them enabled for all models.
+	 */
+	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
+	__raw_writel(0x000005ef, S3C2410_GPHDAT);
+	__raw_writel(0x0000063f, S3C2410_GPHUP);
+}
+
+static void __init n30_map_io(void)
+{
+	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
+	n30_hwinit();
+	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+/* GPB3 is the line that controls the pull-up for the USB D+ line */
+
+static void __init n30_init(void)
+{
+	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
+	s3c24xx_fb_set_platdata(&n30_fb_info);
+	gpiod_add_lookup_table(&n30_udc_gpio_table);
+	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	gpiod_add_lookup_table(&n30_mci_gpio_table);
+	s3c24xx_mci_set_platdata(&n30_mci_cfg);
+	s3c_i2c0_set_platdata(&n30_i2ccfg);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	if (machine_is_n30()) {
+		/* Turn off suspend on both USB ports, and switch the
+		 * selectable USB port to USB device mode. */
+		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+				      S3C2410_MISCCR_USBSUSPND0 |
+				      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n30_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n30_warning_led_gpio_table);
+
+		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+	}
+
+	if (machine_is_n35()) {
+		/* Turn off suspend and switch the selectable USB port
+		 * to USB device mode.  Turn on suspend for the host
+		 * port since it is not connected on the N35.
+		 *
+		 * Actually, the host port is available at some pads
+		 * on the back of the device, so it would actually be
+		 * possible to add a USB device inside the N35 if you
+		 * are willing to do some hardware modifications. */
+		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+				      S3C2410_MISCCR_USBSUSPND0 |
+				      S3C2410_MISCCR_USBSUSPND1,
+				      S3C2410_MISCCR_USBSUSPND0);
+
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n35_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n35_warning_led_gpio_table);
+
+		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
+	}
+}
+
+MACHINE_START(N30, "Acer-N30")
+	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
+				Ben Dooks <ben-linux@fluff.org>
+	*/
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.init_time	= n30_init_time,
+	.init_machine	= n30_init,
+	.init_irq	= s3c2410_init_irq,
+	.map_io		= n30_map_io,
+MACHINE_END
+
+MACHINE_START(N35, "Acer-N35")
+	/* Maintainer: Christer Weinigel <christer@weinigel.se>
+	*/
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.init_time	= n30_init_time,
+	.init_machine	= n30_init,
+	.init_irq	= s3c2410_init_irq,
+	.map_io		= n30_map_io,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
new file mode 100644
index 000000000..1e65f8bce
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-ncp.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2008-2009 Samsung Electronics
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "irqs.h"
+#include "map.h"
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "fb.h"
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct map_desc ncp_iodesc[] __initdata = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
new file mode 100644
index 000000000..d17a3fcb7
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-nexcoder.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+// linux/arch/arm/mach-s3c2440/mach-nexcoder.c
+//
+// Copyright (c) 2004 Nex Vision
+//   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
+//
+// Modifications:
+//     15-10-2004 GG  Created initial version
+//     12-03-2005 BJD Updated for release
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mtd/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c24xx.h"
+
+static struct map_desc nexcoder_iodesc[] __initdata = {
+	/* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* NOR Flash on NexVision NexCoder 2440 board */
+
+static struct resource nexcoder_nor_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
+};
+
+static struct map_info nexcoder_nor_map = {
+	.bankwidth = 2,
+};
+
+static struct platform_device nexcoder_device_nor = {
+	.name		= "mtd-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
+	.resource	= nexcoder_nor_resource,
+	.dev =
+	{
+		.platform_data = &nexcoder_nor_map,
+	}
+};
+
+/* Standard Nexcoder devices */
+
+static struct platform_device *nexcoder_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+ 	&s3c_device_rtc,
+	&s3c_device_camif,
+	&s3c_device_spi0,
+	&s3c_device_spi1,
+	&nexcoder_device_nor,
+};
+
+static void __init nexcoder_sensorboard_init(void)
+{
+	/* Initialize SCCB bus */
+	gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPE(14)); /* IICSCL */
+	gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPE(15)); /* IICSDA */
+
+	/* Power up the sensor board */
+	gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
+	gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+	gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
+}
+
+static void __init nexcoder_map_io(void)
+{
+	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
+	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+
+	nexcoder_sensorboard_init();
+}
+
+static void __init nexcoder_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init nexcoder_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
+
+MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
+	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= nexcoder_map_io,
+	.init_machine	= nexcoder_init,
+	.init_irq	= s3c2440_init_irq,
+	.init_time	= nexcoder_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
new file mode 100644
index 000000000..2e283aeda
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-osiris-dvs.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Simtec Osiris Dynamic Voltage Scaling support.
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/tps65010.h>
+
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "gpio-samsung.h"
+
+#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+	unsigned vregs1 = 0, vdcdc2 = 0;
+
+	if (!on) {
+		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
+	}
+
+	dvs_en = on;
+	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+	tps65010_config_vregs1(vregs1);
+	tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+	/* at the moment, we assume ARMCLK = HCLK => DVS */
+	return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+			      unsigned long val, void *data)
+{
+	struct cpufreq_freqs *cf = data;
+	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+	bool old_dvs = is_dvs(&freqs->old);
+	bool new_dvs = is_dvs(&freqs->new);
+	int ret = 0;
+
+	if (!dvs_en)
+		return 0;
+
+	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+	       freqs->old.armclk, freqs->old.hclk,
+	       freqs->new.armclk, freqs->new.hclk);
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if ((old_dvs && !new_dvs) ||
+		    (cur_dvs && !new_dvs)) {
+			pr_debug("%s: exiting dvs\n", __func__);
+			cur_dvs = false;
+			gpio_set_value(OSIRIS_GPIO_DVS, 1);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if ((!old_dvs && new_dvs) ||
+		    (!cur_dvs && new_dvs)) {
+			pr_debug("entering dvs\n");
+			cur_dvs = true;
+			gpio_set_value(OSIRIS_GPIO_DVS, 0);
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+	.notifier_call	= osiris_dvs_notify,
+};
+
+static int osiris_dvs_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "initialising\n");
+
+	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot claim gpio\n");
+		goto err_nogpio;
+	}
+
+	/* start with dvs disabled */
+	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+	ret = cpufreq_register_notifier(&osiris_dvs_nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register with cpufreq\n");
+		goto err_nofreq;
+	}
+
+	osiris_dvs_tps_setdvs(true);
+
+	return 0;
+
+err_nofreq:
+	gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+	return ret;
+}
+
+static int osiris_dvs_remove(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "exiting\n");
+
+	/* disable any current dvs */
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+
+	cpufreq_unregister_notifier(&osiris_dvs_nb,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	gpio_free(OSIRIS_GPIO_DVS);
+
+	return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+	cur_dvs = false;
+
+	return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+	osiris_dvs_tps_setdvs(true);
+	return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+	.suspend	= osiris_dvs_suspend,
+	.resume		= osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+	.probe		= osiris_dvs_probe,
+	.remove		= osiris_dvs_remove,
+	.driver		= {
+		.name	= "osiris-dvs",
+		.pm	= &osiris_dvs_pm,
+	},
+};
+
+module_platform_driver(osiris_dvs_driver);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
new file mode 100644
index 000000000..d900d1354
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-osiris.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2005-2008 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65010.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "devs.h"
+#include "gpio-cfg.h"
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "s3c24xx.h"
+#include "osiris.h"
+#include "regs-mem-s3c24xx.h"
+
+/* onboard perihperal map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+  /* ISA IO areas (may be over-written later) */
+
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= __phys_to_pfn(S3C2410_CS5),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
+
+  /* CPLD control registers */
+
+  {
+	  .virtual	= (u32)OSIRIS_VA_CTRL0,
+	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL0),
+	  .length	= SZ_16K,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)OSIRIS_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
+	  .length	= SZ_16K,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)OSIRIS_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
+	  .length	= SZ_16K,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)OSIRIS_VA_IDREG,
+	  .pfn		= __phys_to_pfn(OSIRIS_PA_IDREG),
+	  .length	= SZ_16K,
+	  .type		= MT_DEVICE,
+  },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	}
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_128K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_128K,
+		.offset	= SZ_128K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
+	[1] = {
+		.name		= "External",
+		.nr_chips	= 1,
+		.nr_map		= external_map,
+		.options	= NAND_SCAN_SILENT_NODEV,
+		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
+		.partitions	= osiris_default_nand_part,
+	},
+	[0] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
+		.partitions	= osiris_default_nand_part,
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.options	= NAND_SCAN_SILENT_NODEV,
+		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
+		.partitions	= osiris_default_nand_part,
+	},
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(OSIRIS_VA_CTRL0);
+	tmp &= ~OSIRIS_CTRL0_NANDSEL;
+	tmp |= slot;
+
+	pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
+
+	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
+}
+
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 60,
+	.twrph1		= 60,
+	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
+	.sets		= osiris_nand_sets,
+	.select_chip	= osiris_nand_select,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+	[0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
+	[1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
+};
+
+static struct platform_device osiris_pcmcia = {
+	.name		= "osiris-pcmcia",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
+	.resource	= osiris_pcmcia_resource,
+};
+
+/* Osiris power management device */
+
+#ifdef CONFIG_PM
+static unsigned char pm_osiris_ctrl0;
+
+static int osiris_pm_suspend(void)
+{
+	unsigned int tmp;
+
+	pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+	tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+	/* ensure correct NAND slot is selected on resume */
+	if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+	        tmp |= 2;
+
+	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+	/* ensure that an nRESET is not generated on resume. */
+	gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPA(21));
+
+	return 0;
+}
+
+static void osiris_pm_resume(void)
+{
+	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
+		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+
+	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define osiris_pm_suspend NULL
+#define osiris_pm_resume NULL
+#endif
+
+static struct syscore_ops osiris_pm_syscore_ops = {
+	.suspend	= osiris_pm_suspend,
+	.resume		= osiris_pm_resume,
+};
+
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+	/* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+	.name	= "osiris-dvs",
+	.id	= -1,
+	.dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+	osiris_tps_device.dev.parent = &client->dev;
+	return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+	platform_device_unregister(&osiris_tps_device);
+	return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+	.base		= -1,	/* GPIO can go anywhere at the moment */
+	.setup		= osiris_tps_setup,
+	.teardown	= osiris_tps_remove,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tps65011", 0x48),
+		.irq	= IRQ_EINT20,
+		.platform_data = &osiris_tps_board,
+	},
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+	&s3c2410_device_dclk,
+	&s3c_device_i2c0,
+	&s3c_device_wdt,
+	&s3c_device_nand,
+	&osiris_pcmcia,
+};
+
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+	.refresh	= 7800, /* refresh period is 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
+static void __init osiris_map_io(void)
+{
+	unsigned long flags;
+
+	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+
+	/* check for the newer revision boards with large page nand */
+
+	if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
+		printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
+		       __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
+		osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
+		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
+	} else {
+		/* write-protect line to the NAND */
+		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPA(0));
+	}
+
+	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+	local_irq_save(flags);
+	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+	local_irq_restore(flags);
+}
+
+static void __init osiris_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init osiris_init(void)
+{
+	register_syscore_ops(&osiris_pm_syscore_ops);
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&osiris_nand_info);
+
+	s3c_cpufreq_setboard(&osiris_cpufreq);
+
+	i2c_register_board_info(0, osiris_i2c_devs,
+				ARRAY_SIZE(osiris_i2c_devs));
+
+	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= osiris_map_io,
+	.init_irq	= s3c2440_init_irq,
+	.init_machine	= osiris_init,
+	.init_time	= osiris_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
new file mode 100644
index 000000000..3a2db2f58
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-otom.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2004 Nex Vision
+//   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include "cpu.h"
+#include "devs.h"
+
+#include "s3c24xx.h"
+#include "otom.h"
+
+static struct map_desc otom11_iodesc[] __initdata = {
+  /* Device area */
+	{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* port 2 is not actually used */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* NOR Flash on NexVision OTOM board */
+
+static struct resource otom_nor_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
+};
+
+static struct platform_device otom_device_nor = {
+	.name		= "mtd-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otom_nor_resource),
+	.resource	= otom_nor_resource,
+};
+
+/* Standard OTOM devices */
+
+static struct platform_device *otom11_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+ 	&s3c_device_rtc,
+	&otom_device_nor,
+};
+
+static void __init otom11_map_io(void)
+{
+	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
+	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init otom11_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
+}
+
+MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
+	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= otom11_map_io,
+	.init_machine	= otom11_init,
+	.init_irq	= s3c2410_init_irq,
+	.init_time	= otom11_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
new file mode 100644
index 000000000..36fe0684a
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-qt2410.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2006 by OpenMoko, Inc.
+// Author: Harald Welte <laforge@openmoko.org>
+// All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "gpio-samsung.h"
+
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
+	{
+		/* Configuration for 640x480 SHARP LQ080V3DG01 */
+		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
+			   S3C2410_LCDCON5_INVVLINE |
+			   S3C2410_LCDCON5_INVVFRAME |
+			   S3C2410_LCDCON5_PWREN |
+			   S3C2410_LCDCON5_HWSWP,
+
+		.type		= S3C2410_LCDCON1_TFT,
+		.width		= 640,
+		.height		= 480,
+
+		.pixclock	= 40000, /* HCLK/4 */
+		.xres		= 640,
+		.yres		= 480,
+		.bpp		= 16,
+		.left_margin	= 44,
+		.right_margin	= 116,
+		.hsync_len	= 96,
+		.upper_margin	= 19,
+		.lower_margin	= 11,
+		.vsync_len	= 15,
+	},
+	{
+		/* Configuration for 480x640 toppoly TD028TTEC1 */
+		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
+			   S3C2410_LCDCON5_INVVLINE |
+			   S3C2410_LCDCON5_INVVFRAME |
+			   S3C2410_LCDCON5_PWREN |
+			   S3C2410_LCDCON5_HWSWP,
+
+		.type		= S3C2410_LCDCON1_TFT,
+		.width		= 480,
+		.height		= 640,
+		.pixclock	= 40000, /* HCLK/4 */
+		.xres		= 480,
+		.yres		= 640,
+		.bpp		= 16,
+		.left_margin	= 8,
+		.right_margin	= 24,
+		.hsync_len	= 8,
+		.upper_margin	= 2,
+		.lower_margin	= 4,
+		.vsync_len	= 2,
+	},
+	{
+		/* Config for 240x320 LCD */
+		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
+			   S3C2410_LCDCON5_INVVLINE |
+			   S3C2410_LCDCON5_INVVFRAME |
+			   S3C2410_LCDCON5_PWREN |
+			   S3C2410_LCDCON5_HWSWP,
+
+		.type		= S3C2410_LCDCON1_TFT,
+		.width		= 240,
+		.height		= 320,
+		.pixclock	= 100000, /* HCLK/10 */
+		.xres		= 240,
+		.yres		= 320,
+		.bpp		= 16,
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.hsync_len	= 4,
+		.upper_margin	= 2,
+		.lower_margin	= 7,
+		.vsync_len	= 4,
+	},
+};
+
+
+static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
+	.displays 	= qt2410_lcd_cfg,
+	.num_displays 	= ARRAY_SIZE(qt2410_lcd_cfg),
+	.default_display = 0,
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+};
+
+/* CS8900 */
+
+static struct resource qt2410_cs89x0_resources[] = {
+	[0] = DEFINE_RES_MEM(0x19000000, 17),
+	[1] = DEFINE_RES_IRQ(IRQ_EINT9),
+};
+
+static struct platform_device qt2410_cs89x0 = {
+	.name		= "cirrus-cs89x0",
+	.num_resources	= ARRAY_SIZE(qt2410_cs89x0_resources),
+	.resource	= qt2410_cs89x0_resources,
+};
+
+/* LED */
+
+static struct gpiod_lookup_table qt2410_led_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata qt2410_pdata_led = {
+	.name		= "led",
+	.def_trigger	= "timer",
+};
+
+static struct platform_device qt2410_led = {
+	.name		= "s3c24xx_led",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &qt2410_pdata_led,
+	},
+};
+
+/* SPI */
+
+static struct spi_gpio_platform_data spi_gpio_cfg = {
+	.num_chipselect	= 1,
+};
+
+static struct platform_device qt2410_spi = {
+	.name		= "spi_gpio",
+	.id		= 1,
+	.dev.platform_data = &spi_gpio_cfg,
+};
+
+static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
+	.dev_id         = "spi_gpio",
+	.table          = {
+		GPIO_LOOKUP("GPIOG", 7,
+			    "sck", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOG", 6,
+			    "mosi", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOG", 5,
+			    "miso", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOB", 5,
+			    "cs", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+/* Board devices */
+
+static struct platform_device *qt2410_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&qt2410_spi,
+	&qt2410_cs89x0,
+	&qt2410_led,
+};
+
+static struct mtd_partition __initdata qt2410_nand_part[] = {
+	[0] = {
+		.name	= "U-Boot",
+		.size	= 0x30000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "U-Boot environment",
+		.offset = 0x30000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "kernel",
+		.offset = 0x34000,
+		.size	= SZ_2M,
+	},
+	[3] = {
+		.name	= "initrd",
+		.offset	= 0x234000,
+		.size	= SZ_4M,
+	},
+	[4] = {
+		.name	= "jffs2",
+		.offset = 0x634000,
+		.size	= 0x39cc000,
+	},
+};
+
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(qt2410_nand_part),
+		.partitions	= qt2410_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
+	.sets		= qt2410_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+	tft_type = str[0];
+	return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init qt2410_machine_init(void)
+{
+	s3c_nand_set_platdata(&qt2410_nand_info);
+
+	switch (tft_type) {
+	case 'p': /* production */
+		qt2410_fb_info.default_display = 1;
+		break;
+	case 'b': /* big */
+		qt2410_fb_info.default_display = 0;
+		break;
+	case 's': /* small */
+	default:
+		qt2410_fb_info.default_display = 2;
+		break;
+	}
+	s3c24xx_fb_set_platdata(&qt2410_fb_info);
+
+	/* set initial state of the LED GPIO */
+	WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
+	gpio_free(S3C2410_GPB(0));
+
+	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&qt2410_led_gpio_table);
+	gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
+	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
+	s3c_pm_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= qt2410_map_io,
+	.init_irq	= s3c2410_init_irq,
+	.init_machine	= qt2410_machine_init,
+	.init_time	= qt2410_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
new file mode 100644
index 000000000..8c10ebc38
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-real6410.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "irqs.h"
+
+#include <linux/soc/samsung/s3c-adc.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[1] = {
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[2] = {
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[3] = {
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource real6410_dm9k_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct dm9000_plat_data real6410_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device real6410_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
+};
+
+static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 480,
+	.yres		= 272,
+};
+
+static struct fb_videomode real6410_lcd_type0_timing = {
+	/* 4.3" 480x272 */
+	.left_margin	= 3,
+	.right_margin	= 2,
+	.upper_margin	= 1,
+	.lower_margin	= 1,
+	.hsync_len	= 40,
+	.vsync_len	= 1,
+};
+
+static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode real6410_lcd_type1_timing = {
+	/* 7.0" 800x480 */
+	.left_margin	= 8,
+	.right_margin	= 13,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
+	{
+		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+		.vtiming	= &real6410_lcd_type0_timing,
+		.win[0]		= &real6410_lcd_type0_fb_win,
+		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	}, {
+		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+		.vtiming	= &real6410_lcd_type1_timing,
+		.win[0]		= &real6410_lcd_type1_fb_win,
+		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	},
+	{ },
+};
+
+static struct mtd_partition real6410_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[2] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set real6410_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
+		.partitions	= real6410_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand real6410_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
+	.sets		= real6410_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static struct platform_device *real6410_devices[] __initdata = {
+	&real6410_device_eth,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_fb,
+	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_ohci,
+};
+
+static void __init real6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * real6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char real6410_features_str[12] __initdata = "0";
+
+static int __init real6410_features_setup(char *str)
+{
+	if (str)
+		strlcpy(real6410_features_str, str,
+			sizeof(real6410_features_str));
+	return 1;
+}
+
+__setup("real6410=", real6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct real6410_features_t {
+	int done;
+	int lcd_index;
+};
+
+static void real6410_parse_features(
+		struct real6410_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->done = 0;
+	features->lcd_index = 0;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "REAL6410: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(real6410_lcd_pdata))
+					printk(KERN_INFO "REAL6410: '%c' out "
+						"of range LCD mode\n", f);
+				else {
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		}
+	}
+}
+
+static void __init real6410_machine_init(void)
+{
+	u32 cs1;
+	struct real6410_features_t features = { 0 };
+
+	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
+			real6410_features_str);
+
+	/* Parse the feature string */
+	real6410_parse_features(&features, real6410_features_str);
+
+	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
+		real6410_lcd_pdata[features.lcd_index].win[0]->xres,
+		real6410_lcd_pdata[features.lcd_index].win[0]->yres);
+
+	s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
+	s3c_nand_set_platdata(&real6410_nand_info);
+	s3c64xx_ts_set_platdata(NULL);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+			S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
+	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
+}
+
+MACHINE_START(REAL6410, "REAL6410")
+	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= real6410_map_io,
+	.init_machine	= real6410_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
new file mode 100644
index 000000000..d8c49e562
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+// Copyright (c) 2007-2010 Vasily Khoruzhick
+//
+// based on smdk2440 written by Ben Dooks
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/device.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <sound/uda1380.h>
+
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
+
+#include "s3c24xx.h"
+#include "h1940.h"
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+	[0] = {
+	       .hwport = 0,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x03,
+	       .ufcon = 0x51,
+		.clk_sel = S3C2410_UCON_CLKSEL3,
+	},
+	[1] = {
+	       .hwport = 1,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x03,
+	       .ufcon = 0x51,
+		.clk_sel = S3C2410_UCON_CLKSEL3,
+	},
+	/* IR port */
+	[2] = {
+	       .hwport = 2,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x43,
+	       .ufcon = 0xf1,
+		.clk_sel = S3C2410_UCON_CLKSEL3,
+	},
+};
+
+static struct s3c2410fb_display rx1950_display = {
+	.type = S3C2410_LCDCON1_TFT,
+	.width = 240,
+	.height = 320,
+	.xres = 240,
+	.yres = 320,
+	.bpp = 16,
+
+	.pixclock = 260000,
+	.left_margin = 10,
+	.right_margin = 20,
+	.hsync_len = 10,
+	.upper_margin = 2,
+	.lower_margin = 2,
+	.vsync_len = 2,
+
+	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
+			   S3C2410_LCDCON5_INVVCLK |
+			   S3C2410_LCDCON5_INVVLINE |
+			   S3C2410_LCDCON5_INVVFRAME |
+			   S3C2410_LCDCON5_HWSWP |
+			   (0x02 << 13) |
+			   (0x02 << 15),
+
+};
+
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int rx1950_is_ac_online(void)
+{
+	return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(S3C2410_GPF(2));
+}
+
+static char *rx1950_supplicants[] = {
+	"main-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init			= power_supply_init,
+	.is_ac_online		= rx1950_is_ac_online,
+	.exit			= power_supply_exit,
+	.supplied_to		= rx1950_supplicants,
+	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
+};
+
+static struct platform_device power_supply = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev			= {
+					.platform_data =
+						&power_supply_info,
+	},
+	.resource		= power_supply_resources,
+	.num_resources		= ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+	{ .volt = 4100, .cur = 156, .level = 100},
+	{ .volt = 4050, .cur = 156, .level = 95},
+	{ .volt = 4025, .cur = 141, .level = 90},
+	{ .volt = 3995, .cur = 144, .level = 85},
+	{ .volt = 3957, .cur = 162, .level = 80},
+	{ .volt = 3931, .cur = 147, .level = 75},
+	{ .volt = 3902, .cur = 147, .level = 70},
+	{ .volt = 3863, .cur = 153, .level = 65},
+	{ .volt = 3838, .cur = 150, .level = 60},
+	{ .volt = 3800, .cur = 153, .level = 55},
+	{ .volt = 3765, .cur = 153, .level = 50},
+	{ .volt = 3748, .cur = 172, .level = 45},
+	{ .volt = 3740, .cur = 153, .level = 40},
+	{ .volt = 3714, .cur = 175, .level = 35},
+	{ .volt = 3710, .cur = 156, .level = 30},
+	{ .volt = 3963, .cur = 156, .level = 25},
+	{ .volt = 3672, .cur = 178, .level = 20},
+	{ .volt = 3651, .cur = 178, .level = 15},
+	{ .volt = 3629, .cur = 178, .level = 10},
+	{ .volt = 3612, .cur = 162, .level = 5},
+	{ .volt = 3605, .cur = 162, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+	{ .volt = 4200, .cur = 0, .level = 100},
+	{ .volt = 4190, .cur = 0, .level = 99},
+	{ .volt = 4178, .cur = 0, .level = 95},
+	{ .volt = 4110, .cur = 0, .level = 70},
+	{ .volt = 4076, .cur = 0, .level = 65},
+	{ .volt = 4046, .cur = 0, .level = 60},
+	{ .volt = 4021, .cur = 0, .level = 55},
+	{ .volt = 3999, .cur = 0, .level = 50},
+	{ .volt = 3982, .cur = 0, .level = 45},
+	{ .volt = 3965, .cur = 0, .level = 40},
+	{ .volt = 3957, .cur = 0, .level = 35},
+	{ .volt = 3948, .cur = 0, .level = 30},
+	{ .volt = 3936, .cur = 0, .level = 25},
+	{ .volt = 3927, .cur = 0, .level = 20},
+	{ .volt = 3906, .cur = 0, .level = 15},
+	{ .volt = 3880, .cur = 0, .level = 10},
+	{ .volt = 3829, .cur = 0, .level = 5},
+	{ .volt = 3820, .cur = 0, .level = 0},
+};
+
+static struct gpiod_lookup_table rx1950_bat_gpio_table = {
+	.dev_id = "s3c-adc-battery",
+	.table = {
+		/* Charge status S3C2410_GPF(3) */
+		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static int rx1950_bat_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
+	if (ret)
+		goto err_gpio1;
+	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
+	if (ret)
+		goto err_gpio2;
+
+	return 0;
+
+err_gpio2:
+	gpio_free(S3C2410_GPJ(2));
+err_gpio1:
+	return ret;
+}
+
+static void rx1950_bat_exit(void)
+{
+	gpio_free(S3C2410_GPJ(2));
+	gpio_free(S3C2410_GPJ(3));
+}
+
+static void rx1950_enable_charger(void)
+{
+	gpio_direction_output(S3C2410_GPJ(2), 1);
+	gpio_direction_output(S3C2410_GPJ(3), 1);
+}
+
+static void rx1950_disable_charger(void)
+{
+	gpio_direction_output(S3C2410_GPJ(2), 0);
+	gpio_direction_output(S3C2410_GPJ(3), 0);
+}
+
+static DEFINE_SPINLOCK(rx1950_blink_spin);
+
+static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	int gpio = desc_to_gpio(desc);
+	int blink_gpio, check_gpio;
+
+	switch (gpio) {
+	case S3C2410_GPA(6):
+		blink_gpio = S3C2410_GPA(4);
+		check_gpio = S3C2410_GPA(3);
+		break;
+	case S3C2410_GPA(7):
+		blink_gpio = S3C2410_GPA(3);
+		check_gpio = S3C2410_GPA(4);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
+		*delay_on = *delay_off = 500;
+
+	spin_lock(&rx1950_blink_spin);
+
+	switch (state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		if (!gpio_get_value(check_gpio))
+			gpio_set_value(S3C2410_GPJ(6), 0);
+		gpio_set_value(blink_gpio, 0);
+		gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		gpio_set_value(gpio, 0);
+		gpio_set_value(S3C2410_GPJ(6), 1);
+		gpio_set_value(blink_gpio, 1);
+		break;
+	}
+
+	spin_unlock(&rx1950_blink_spin);
+
+	return 0;
+}
+
+static struct gpio_led rx1950_leds_desc[] = {
+	{
+		.name			= "Green",
+		.default_trigger	= "main-battery-full",
+		.gpio			= S3C2410_GPA(6),
+		.retain_state_suspended	= 1,
+	},
+	{
+		.name			= "Red",
+		.default_trigger
+			= "main-battery-charging-blink-full-solid",
+		.gpio			= S3C2410_GPA(7),
+		.retain_state_suspended	= 1,
+	},
+	{
+		.name			= "Blue",
+		.default_trigger	= "rx1950-acx-mem",
+		.gpio			= S3C2410_GPA(11),
+		.retain_state_suspended	= 1,
+	},
+};
+
+static struct gpio_led_platform_data rx1950_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
+	.leds		= rx1950_leds_desc,
+	.gpio_blink_set	= rx1950_led_blink_set,
+};
+
+static struct platform_device rx1950_leds = {
+	.name	= "leds-gpio",
+	.id		= -1,
+	.dev	= {
+				.platform_data = &rx1950_leds_pdata,
+	},
+};
+
+static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
+	.init = rx1950_bat_init,
+	.exit = rx1950_bat_exit,
+	.enable_charger = rx1950_enable_charger,
+	.disable_charger = rx1950_disable_charger,
+	.lut_noac = bat_lut_noac,
+	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+	.lut_acin = bat_lut_acin,
+	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+	.volt_channel = 0,
+	.current_channel = 1,
+	.volt_mult = 4235,
+	.current_mult = 2900,
+	.internal_impedance = 200,
+};
+
+static struct platform_device rx1950_battery = {
+	.name             = "s3c-adc-battery",
+	.id               = -1,
+	.dev = {
+		.parent = &s3c_device_adc.dev,
+		.platform_data = &rx1950_bat_cfg,
+	},
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+	.displays = &rx1950_display,
+	.num_displays = 1,
+	.default_display = 0,
+
+	.lpcsel = 0x02,
+	.gpccon = 0xaa9556a9,
+	.gpccon_mask = 0xffc003fc,
+	.gpccon_reg = S3C2410_GPCCON,
+	.gpcup = 0x0000ffff,
+	.gpcup_mask = 0xffffffff,
+	.gpcup_reg = S3C2410_GPCUP,
+
+	.gpdcon = 0xaa90aaa1,
+	.gpdcon_mask = 0xffc0fff0,
+	.gpdcon_reg = S3C2410_GPDCON,
+	.gpdup = 0x0000fcfd,
+	.gpdup_mask = 0xffffffff,
+	.gpdup_reg = S3C2410_GPDUP,
+};
+
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct pwm_device *lcd_pwm;
+static struct pwm_state lcd_pwm_state;
+
+static void rx1950_lcd_power(int enable)
+{
+	int i;
+	static int enabled;
+	if (enabled == enable)
+		return;
+	if (!enable) {
+
+		/* GPC11-GPC15->OUTPUT */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPC(i), 1);
+
+		/* Wait a bit here... */
+		mdelay(100);
+
+		/* GPD2-GPD7->OUTPUT */
+		/* GPD11-GPD15->OUTPUT */
+		/* GPD2-GPD7->1, GPD11-GPD15->1 */
+		for (i = 2; i < 8; i++)
+			gpio_direction_output(S3C2410_GPD(i), 1);
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPD(i), 1);
+
+		/* Wait a bit here...*/
+		mdelay(100);
+
+		/* GPB0->OUTPUT, GPB0->0 */
+		gpio_direction_output(S3C2410_GPB(0), 0);
+
+		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+		for (i = 1; i < 5; i++)
+			gpio_direction_output(S3C2410_GPC(i), 0);
+
+		/* GPC15-GPC11->0 */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPC(i), 0);
+
+		/* GPD15-GPD11->0, GPD2->GPD7->0 */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPD(i), 0);
+
+		for (i = 2; i < 8; i++)
+			gpio_direction_output(S3C2410_GPD(i), 0);
+
+		/* GPC6->0, GPC7->0, GPC5->0 */
+		gpio_direction_output(S3C2410_GPC(6), 0);
+		gpio_direction_output(S3C2410_GPC(7), 0);
+		gpio_direction_output(S3C2410_GPC(5), 0);
+
+		/* GPB1->OUTPUT, GPB1->0 */
+		gpio_direction_output(S3C2410_GPB(1), 0);
+
+		lcd_pwm_state.enabled = false;
+		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
+
+		/* GPC0->0, GPC10->0 */
+		gpio_direction_output(S3C2410_GPC(0), 0);
+		gpio_direction_output(S3C2410_GPC(10), 0);
+	} else {
+		lcd_pwm_state.enabled = true;
+		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
+
+		gpio_direction_output(S3C2410_GPC(0), 1);
+		gpio_direction_output(S3C2410_GPC(5), 1);
+
+		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+		gpio_direction_output(S3C2410_GPC(7), 1);
+
+		for (i = 1; i < 5; i++)
+			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+		for (i = 11; i < 16; i++)
+			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+		for (i = 2; i < 8; i++)
+			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+		for (i = 11; i < 16; i++)
+			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+		gpio_direction_output(S3C2410_GPC(10), 1);
+		gpio_direction_output(S3C2410_GPC(6), 1);
+	}
+	enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+	static int enabled;
+	if (enabled == enable)
+		return;
+	if (!enable) {
+			gpio_direction_output(S3C2410_GPB(0), 0);
+	} else {
+			/* LED driver need a "push" to power on */
+			gpio_direction_output(S3C2410_GPB(0), 1);
+			/* Warm up backlight for one period of PWM.
+			 * Without this trick its almost impossible to
+			 * enable backlight with low brightness value
+			 */
+			ndelay(48000);
+			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	}
+	enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+	lcd_pwm = pwm_get(dev, "RX1950 LCD");
+	if (IS_ERR(lcd_pwm)) {
+		dev_err(dev, "Unable to request PWM for LCD power!\n");
+		return PTR_ERR(lcd_pwm);
+	}
+
+	/*
+	 * Call pwm_init_state to initialize .polarity and .period. The other
+	 * values are fixed in this driver.
+	 */
+	pwm_init_state(lcd_pwm, &lcd_pwm_state);
+
+	lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
+
+	rx1950_lcd_power(1);
+	rx1950_bl_power(1);
+
+	return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+	rx1950_bl_power(0);
+	rx1950_lcd_power(0);
+
+	pwm_put(lcd_pwm);
+	gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+	if (!brightness) {
+		rx1950_bl_power(0);
+		rx1950_lcd_power(0);
+	} else {
+		rx1950_lcd_power(1);
+		rx1950_bl_power(1);
+	}
+	return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+	.max_brightness = 24,
+	.dft_brightness = 4,
+	.init = rx1950_backlight_init,
+	.notify = rx1950_backlight_notify,
+	.exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+	.name = "pwm-backlight",
+	.dev = {
+		.parent = &samsung_device_pwm.dev,
+		.platform_data = &rx1950_backlight_data,
+	},
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+	s3c24xx_mci_def_set_power(power_mode, vdd);
+
+	switch (power_mode) {
+	case MMC_POWER_OFF:
+		gpio_direction_output(S3C2410_GPJ(1), 0);
+		break;
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		gpio_direction_output(S3C2410_GPJ(1), 1);
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+	.set_power = rx1950_set_mmc_power,
+	.ocr_avail = MMC_VDD_32_33,
+};
+
+static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* Card detect S3C2410_GPF(5) */
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
+		/* Write protect S3C2410_GPH(8) */
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+	[0] = {
+			.name = "Boot0",
+			.offset = 0,
+			.size = 0x4000,
+			.mask_flags = MTD_WRITEABLE,
+	},
+	[1] = {
+			.name = "Boot1",
+			.offset = MTDPART_OFS_APPEND,
+			.size = 0x40000,
+			.mask_flags = MTD_WRITEABLE,
+	},
+	[2] = {
+			.name = "Kernel",
+			.offset = MTDPART_OFS_APPEND,
+			.size = 0x300000,
+			.mask_flags = 0,
+	},
+	[3] = {
+			.name = "Filesystem",
+			.offset = MTDPART_OFS_APPEND,
+			.size = MTDPART_SIZ_FULL,
+			.mask_flags = 0,
+	},
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+	[0] = {
+			.name = "Internal",
+			.nr_chips = 1,
+			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+			.partitions = rx1950_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+	.tacls = 25,
+	.twrph0 = 50,
+	.twrph1 = 15,
+	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+	.sets = rx1950_nand_sets,
+	.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+};
+
+static struct gpiod_lookup_table rx1950_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+	.delay = 10000,
+	.presc = 49,
+	.oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= S3C2410_GPF(0),
+		.active_low	= 1,
+		.desc		= "Power button",
+		.wakeup		= 1,
+	},
+	{
+		.code		= KEY_F5,
+		.gpio		= S3C2410_GPF(7),
+		.active_low	= 1,
+		.desc		= "Record button",
+	},
+	{
+		.code		= KEY_F1,
+		.gpio		= S3C2410_GPG(0),
+		.active_low	= 1,
+		.desc		= "Calendar button",
+	},
+	{
+		.code		= KEY_F2,
+		.gpio		= S3C2410_GPG(2),
+		.active_low	= 1,
+		.desc		= "Contacts button",
+	},
+	{
+		.code		= KEY_F3,
+		.gpio		= S3C2410_GPG(3),
+		.active_low	= 1,
+		.desc		= "Mail button",
+	},
+	{
+		.code		= KEY_F4,
+		.gpio		= S3C2410_GPG(7),
+		.active_low	= 1,
+		.desc		= "WLAN button",
+	},
+	{
+		.code		= KEY_LEFT,
+		.gpio		= S3C2410_GPG(10),
+		.active_low	= 1,
+		.desc		= "Left button",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= S3C2410_GPG(11),
+		.active_low	= 1,
+		.desc		= "Right button",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= S3C2410_GPG(4),
+		.active_low	= 1,
+		.desc		= "Up button",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= S3C2410_GPG(6),
+		.active_low	= 1,
+		.desc		= "Down button",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= S3C2410_GPG(9),
+		.active_low	= 1,
+		.desc		= "Ok button"
+	},
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+	.buttons = rx1950_gpio_keys_table,
+	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct uda1380_platform_data uda1380_info = {
+	.gpio_power	= S3C2410_GPJ(0),
+	.gpio_reset	= S3C2410_GPD(0),
+	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info rx1950_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("uda1380", 0x1a),
+		.platform_data = &uda1380_info,
+	},
+};
+
+static struct gpiod_lookup_table rx1950_audio_gpio_table = {
+	.dev_id = "rx1950-audio",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device rx1950_audio = {
+	.name = "rx1950-audio",
+	.id = -1,
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c2410_device_dclk,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_usbgadget,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&samsung_device_pwm,
+	&rx1950_backlight,
+	&rx1950_device_gpiokeys,
+	&power_supply,
+	&rx1950_battery,
+	&rx1950_leds,
+	&rx1950_audio,
+};
+
+static void __init rx1950_map_io(void)
+{
+	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+
+	/* setup PM */
+
+#ifdef CONFIG_PM_H1940
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+	s3c_pm_init();
+}
+
+static void __init rx1950_init_time(void)
+{
+	s3c2442_init_clocks(16934000);
+	s3c24xx_timer_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+	int i;
+
+	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+	gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
+	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&rx1950_nand_info);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+						S3C2410_MISCCR_USBSUSPND0 |
+						S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	/* mmc power is disabled by default */
+	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+	gpio_direction_output(S3C2410_GPJ(1), 0);
+
+	for (i = 0; i < 8; i++)
+		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+	for (i = 10; i < 16; i++)
+		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+	for (i = 2; i < 8; i++)
+		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+	for (i = 11; i < 16; i++)
+		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
+	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
+	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
+	gpio_direction_output(S3C2410_GPA(3), 0);
+	gpio_direction_output(S3C2410_GPA(4), 0);
+	gpio_direction_output(S3C2410_GPJ(6), 0);
+
+	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
+	gpiod_add_lookup_table(&rx1950_udc_gpio_table);
+	gpiod_add_lookup_table(&rx1950_audio_gpio_table);
+	gpiod_add_lookup_table(&rx1950_bat_gpio_table);
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+
+	i2c_register_board_info(0, rx1950_i2c_devices,
+		ARRAY_SIZE(rx1950_i2c_devices));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+    /* Maintainers: Vasily Khoruzhick */
+	.atag_offset = 0x100,
+	.nr_irqs	= NR_IRQS_S3C2442,
+	.map_io = rx1950_map_io,
+	.reserve	= rx1950_reserve,
+	.init_irq	= s3c2442_init_irq,
+	.init_machine = rx1950_init_machine,
+	.init_time	= rx1950_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
new file mode 100644
index 000000000..52b3c38ac
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-rx3715.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2004 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// https://www.handhelds.org/projects/rx3715.html
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "h1940.h"
+
+static struct map_desc rx3715_iodesc[] __initdata = {
+	/* dump ISA space somewhere unused */
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS3),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+		.clk_sel	= S3C2410_UCON_CLKSEL3,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x00,
+		.clk_sel	= S3C2410_UCON_CLKSEL3,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.uart_flags  = UPF_CONS_FLOW,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+		.clk_sel	= S3C2410_UCON_CLKSEL3,
+	}
+};
+
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
+	.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
+			S3C2410_LCDCON5_FRM565 |
+			S3C2410_LCDCON5_HWSWP,
+
+	.type		= S3C2410_LCDCON1_TFT,
+	.width		= 240,
+	.height		= 320,
+
+	.pixclock	= 260000,
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+	.left_margin	= 36,
+	.right_margin	= 36,
+	.hsync_len	= 8,
+	.upper_margin	= 6,
+	.lower_margin	= 7,
+	.vsync_len	= 3,
+};
+
+static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
+
+	.displays =	&rx3715_lcdcfg,
+	.num_displays =	1,
+	.default_display = 0,
+
+	.lpcsel =	0xf82,
+
+	.gpccon =	0xaa955699,
+	.gpccon_mask =	0xffc003cc,
+	.gpccon_reg =	S3C2410_GPCCON,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
+
+	.gpdcon =	0xaa95aaa1,
+	.gpdcon_mask =	0xffc0fff0,
+	.gpdcon_reg =	S3C2410_GPDCON,
+	.gpdup =	0x0000faff,
+	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
+};
+
+static struct mtd_partition __initdata rx3715_nand_part[] = {
+	[0] = {
+		.name		= "Whole Flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
+	[0] = {
+		.name		= "Internal",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
+		.partitions	= rx3715_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 50,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
+	.sets		= rx3715_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static struct platform_device *rx3715_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_nand,
+};
+
+static void __init rx3715_map_io(void)
+{
+	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
+	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init rx3715_init_time(void)
+{
+	s3c2440_init_clocks(16934000);
+	s3c24xx_timer_init();
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
+static void __init rx3715_init_machine(void)
+{
+#ifdef CONFIG_PM_H1940
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+	s3c_pm_init();
+
+	s3c_nand_set_platdata(&rx3715_nand_info);
+	s3c24xx_fb_set_platdata(&rx3715_fb_info);
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
+}
+
+MACHINE_START(RX3715, "IPAQ-RX3715")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= rx3715_map_io,
+	.reserve	= rx3715_reserve,
+	.init_irq	= s3c2440_init_irq,
+	.init_machine	= rx3715_init_machine,
+	.init_time	= rx3715_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
new file mode 100644
index 000000000..418544d30
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-s3c2416-dt.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S3C2416 flattened device tree enabled machine
+//
+// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+//
+// based on mach-exynos/mach-exynos4-dt.c
+//
+// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+// Copyright (c) 2010-2011 Linaro Ltd.
+//		www.linaro.org
+
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/serial_s3c.h>
+
+#include <asm/mach/arch.h>
+#include "map.h"
+
+#include "cpu.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+
+static void __init s3c2416_dt_map_io(void)
+{
+	s3c24xx_init_io(NULL, 0);
+}
+
+static void __init s3c2416_dt_machine_init(void)
+{
+	s3c_pm_init();
+}
+
+static const char *const s3c2416_dt_compat[] __initconst = {
+	"samsung,s3c2416",
+	"samsung,s3c2450",
+	NULL
+};
+
+DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
+	/* Maintainer: Heiko Stuebner <heiko@sntech.de> */
+	.dt_compat	= s3c2416_dt_compat,
+	.map_io		= s3c2416_dt_map_io,
+	.init_irq	= irqchip_init,
+	.init_machine	= s3c2416_dt_machine_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-s3c64xx-dt.c b/arch/arm/mach-s3c/mach-s3c64xx-dt.c
new file mode 100644
index 000000000..00169c103
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-s3c64xx-dt.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S3C64XX flattened device tree enabled machine
+//
+// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include "cpu.h"
+#include "map.h"
+
+#include "s3c64xx.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+	s3c64xx_init_cpu();
+
+	if (!soc_is_s3c64xx())
+		panic("SoC is not S3C64xx!");
+}
+
+static const char *const s3c64xx_dt_compat[] __initconst = {
+	"samsung,s3c6400",
+	"samsung,s3c6410",
+	NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+	/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+	.dt_compat	= s3c64xx_dt_compat,
+	.map_io		= s3c64xx_dt_map_io,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
new file mode 100644
index 000000000..5b6e7c2a8
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smartq.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2010 Maurus Cuelenaere
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "gpio-cfg.h"
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include "sdhci.h"
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include <video/platform_lcd.h>
+
+#include "s3c64xx.h"
+#include "mach-smartq.h"
+#include "regs-modem-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static void smartq_usb_host_powercontrol(int port, int to)
+{
+	pr_debug("%s(%d, %d)\n", __func__, port, to);
+
+	if (port == 0) {
+		gpio_set_value(S3C64XX_GPL(0), to);
+		gpio_set_value(S3C64XX_GPL(1), to);
+	}
+}
+
+static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
+{
+	struct s3c2410_hcd_info *info = pw;
+
+	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
+		pr_debug("%s: over-current irq (oc detected)\n", __func__);
+		s3c2410_usb_report_oc(info, 3);
+	} else {
+		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
+		s3c2410_usb_report_oc(info, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+	int ret;
+
+	/* This isn't present on a SmartQ 5 board */
+	if (machine_is_smartq5())
+		return;
+
+	if (on) {
+		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
+				  smartq_usb_host_ocirq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "USB host overcurrent", info);
+		if (ret != 0)
+			pr_err("failed to request usb oc irq: %d\n", ret);
+	} else {
+		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
+	}
+}
+
+static struct s3c2410_hcd_info smartq_usb_host_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+	.port[1]	= {
+		.flags	= 0
+	},
+
+	.power_control	= smartq_usb_host_powercontrol,
+	.enable_oc	= smartq_usb_host_enableoc,
+};
+
+static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct platform_device smartq_usb_otg_vbus_dev = {
+	.name			= "gpio-vbus",
+};
+
+static struct pwm_lookup smartq_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
+static int smartq_bl_init(struct device *dev)
+{
+    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
+
+    return 0;
+}
+
+static struct platform_pwm_backlight_data smartq_backlight_data = {
+	.max_brightness	= 1000,
+	.dft_brightness	= 600,
+	.init		= smartq_bl_init,
+};
+
+static struct platform_device smartq_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &samsung_device_pwm.dev,
+		.platform_data = &smartq_backlight_data,
+	},
+};
+
+static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
+	.delay			= 65535,
+	.presc			= 99,
+	.oversampling_shift	= 4,
+};
+
+static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
+	/* Battery voltage (?-4.2V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "smartq:battery-voltage",
+		.mult		= 3300,
+		.div		= 2048,
+	},
+	/* Reference voltage (1.2V) */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "smartq:reference-voltage",
+		.mult		= 3300,
+		.div		= 4096,
+	},
+};
+
+static struct dwc2_hsotg_plat smartq_hsotg_pdata;
+
+static int __init smartq_lcd_setup_gpio(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+	if (ret < 0)
+		return ret;
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPM(3), 0);
+
+	return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+	.num_chipselect	= 1,
+};
+
+static struct platform_device smartq_lcd_control_device = {
+	.name			= "spi_gpio",
+	.id			= 1,
+	.dev.platform_data	= &smartq_lcd_control,
+};
+
+static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = {
+	.dev_id         = "spi_gpio",
+	.table          = {
+		GPIO_LOOKUP("GPIOM", 1,
+			    "sck", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOM", 2,
+			    "mosi", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOM", 3,
+			    "miso", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOM", 0,
+			    "cs", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	gpio_direction_output(S3C64XX_GPM(3), power);
+}
+
+static struct plat_lcd_data smartq_lcd_power_data = {
+	.set_power	= smartq_lcd_power_set,
+};
+
+static struct platform_device smartq_lcd_power_device = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smartq_lcd_power_data,
+};
+
+static struct i2c_board_info smartq_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8987", 0x1a), },
+};
+
+static struct platform_device *smartq_devices[] __initdata = {
+	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
+	&s3c_device_hsmmc0,	/* ... then the external SD card */
+	&s3c_device_hsmmc2,
+	&s3c_device_adc,
+	&s3c_device_fb,
+	&s3c_device_hwmon,
+	&s3c_device_i2c0,
+	&s3c_device_ohci,
+	&s3c_device_rtc,
+	&samsung_device_pwm,
+	&s3c_device_usb_hsotg,
+	&s3c64xx_device_iis0,
+	&smartq_backlight_device,
+	&smartq_lcd_control_device,
+	&smartq_lcd_power_device,
+	&smartq_usb_otg_vbus_dev,
+};
+
+static void __init smartq_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void smartq_power_off(void)
+{
+	gpio_direction_output(S3C64XX_GPK(15), 1);
+}
+
+static int __init smartq_power_off_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPK(15), "Power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK15\n", __func__);
+		return ret;
+	}
+
+	/* leave power on */
+	gpio_direction_output(S3C64XX_GPK(15), 0);
+
+	pm_power_off = smartq_power_off;
+
+	return ret;
+}
+
+static int __init smartq_usb_host_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPL0\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPL1\n", __func__);
+		goto err;
+	}
+
+	if (!machine_is_smartq5()) {
+		/* This isn't present on a SmartQ 5 board */
+		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
+		if (ret < 0) {
+			pr_err("%s: failed to get GPL10\n", __func__);
+			goto err2;
+		}
+	}
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPL(0), 0);
+	gpio_direction_output(S3C64XX_GPL(1), 0);
+	if (!machine_is_smartq5())
+		gpio_direction_input(S3C64XX_GPL(10));
+
+	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
+
+	return 0;
+
+err2:
+	gpio_free(S3C64XX_GPL(1));
+err:
+	gpio_free(S3C64XX_GPL(0));
+	return ret;
+}
+
+static int __init smartq_wifi_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK1\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK2\n", __func__);
+		gpio_free(S3C64XX_GPK(1));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C64XX_GPK(1), 1);
+
+	/* reset device */
+	gpio_direction_output(S3C64XX_GPK(2), 0);
+	mdelay(100);
+	gpio_set_value(S3C64XX_GPK(2), 1);
+	gpio_direction_input(S3C64XX_GPK(2));
+
+	return 0;
+}
+
+static struct map_desc smartq_iodesc[] __initdata = {};
+void __init smartq_map_io(void)
+{
+	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
+	s3c64xx_set_xtal_freq(12000000);
+	s3c64xx_set_xusbxti_freq(12000000);
+	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+
+	smartq_lcd_mode_set();
+}
+
+static struct gpiod_lookup_table smartq_audio_gpios = {
+	.dev_id = "smartq-audio",
+	.table = {
+		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
+		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
+		{ },
+	},
+};
+
+void __init smartq_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
+	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
+	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
+	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
+	s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
+
+	i2c_register_board_info(0, smartq_i2c_devs,
+				ARRAY_SIZE(smartq_i2c_devs));
+
+	WARN_ON(smartq_lcd_setup_gpio());
+	WARN_ON(smartq_power_off_init());
+	WARN_ON(smartq_usb_host_init());
+	WARN_ON(smartq_wifi_init());
+
+	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
+	gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
+	gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
+	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+
+	gpiod_add_lookup_table(&smartq_audio_gpios);
+	platform_device_register_simple("smartq-audio", -1, NULL, 0);
+}
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
new file mode 100644
index 000000000..f98132f4f
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smartq.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq.h
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ */
+
+#ifndef __MACH_SMARTQ_H
+#define __MACH_SMARTQ_H __FILE__
+
+#include <linux/init.h>
+
+extern void __init smartq_map_io(void);
+extern void __init smartq_machine_init(void);
+
+#endif /* __MACH_SMARTQ_H */
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
new file mode 100644
index 000000000..ce3fce0bb
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smartq5.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2010 Maurus Cuelenaere
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <video/samsung_fimd.h>
+#include "irqs.h"
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
+
+#include "s3c64xx.h"
+#include "mach-smartq.h"
+
+static struct gpio_led smartq5_leds[] = {
+	{
+		.name			= "smartq5:green",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(8),
+	},
+	{
+		.name			= "smartq5:red",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(9),
+	},
+};
+
+static struct gpio_led_platform_data smartq5_led_data = {
+	.num_leds = ARRAY_SIZE(smartq5_leds),
+	.leds = smartq5_leds,
+};
+
+static struct platform_device smartq5_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &smartq5_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq5_buttons[] = {
+	{
+		.gpio			= S3C64XX_GPL(14),
+		.code			= KEY_POWER,
+		.desc			= "Power",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(2),
+		.code			= KEY_KPMINUS,
+		.desc			= "Minus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(12),
+		.code			= KEY_KPPLUS,
+		.desc			= "Plus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(15),
+		.code			= KEY_ENTER,
+		.desc			= "Move",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data smartq5_buttons_data  = {
+	.buttons	= smartq5_buttons,
+	.nbuttons	= ARRAY_SIZE(smartq5_buttons),
+};
+
+static struct platform_device smartq5_buttons_device  = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &smartq5_buttons_data,
+	}
+};
+
+static struct s3c_fb_pd_win smartq5_fb_win0 = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode smartq5_lcd_timing = {
+	.left_margin	= 216,
+	.right_margin	= 40,
+	.upper_margin	= 35,
+	.lower_margin	= 10,
+	.hsync_len	= 1,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
+	.refresh	= 80,
+};
+
+static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.vtiming	= &smartq5_lcd_timing,
+	.win[0]		= &smartq5_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VDEN,
+};
+
+static struct platform_device *smartq5_devices[] __initdata = {
+	&smartq5_leds_device,
+	&smartq5_buttons_device,
+};
+
+static void __init smartq5_machine_init(void)
+{
+	s3c_fb_set_platdata(&smartq5_lcd_pdata);
+
+	smartq_machine_init();
+
+	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
+}
+
+MACHINE_START(SMARTQ5, "SmartQ 5")
+	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smartq_map_io,
+	.init_machine	= smartq5_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
new file mode 100644
index 000000000..78ca0e704
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smartq7.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2010 Maurus Cuelenaere
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <video/samsung_fimd.h>
+#include "irqs.h"
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
+
+#include "s3c64xx.h"
+#include "mach-smartq.h"
+
+static struct gpio_led smartq7_leds[] = {
+	{
+		.name			= "smartq7:red",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(8),
+	},
+	{
+		.name			= "smartq7:green",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(9),
+	},
+};
+
+static struct gpio_led_platform_data smartq7_led_data = {
+	.num_leds = ARRAY_SIZE(smartq7_leds),
+	.leds = smartq7_leds,
+};
+
+static struct platform_device smartq7_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &smartq7_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq7_buttons[] = {
+	{
+		.gpio			= S3C64XX_GPL(14),
+		.code			= KEY_POWER,
+		.desc			= "Power",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(2),
+		.code			= KEY_FN,
+		.desc			= "Function",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(3),
+		.code			= KEY_KPMINUS,
+		.desc			= "Minus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(4),
+		.code			= KEY_KPPLUS,
+		.desc			= "Plus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(12),
+		.code			= KEY_ENTER,
+		.desc			= "Enter",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(15),
+		.code			= KEY_ESC,
+		.desc			= "Cancel",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data smartq7_buttons_data  = {
+	.buttons	= smartq7_buttons,
+	.nbuttons	= ARRAY_SIZE(smartq7_buttons),
+};
+
+static struct platform_device smartq7_buttons_device  = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &smartq7_buttons_data,
+	}
+};
+
+static struct s3c_fb_pd_win smartq7_fb_win0 = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+static struct fb_videomode smartq7_lcd_timing = {
+	.left_margin	= 3,
+	.right_margin	= 5,
+	.upper_margin	= 1,
+	.lower_margin	= 20,
+	.hsync_len	= 10,
+	.vsync_len	= 3,
+	.xres		= 800,
+	.yres		= 480,
+	.refresh	= 80,
+};
+
+static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.vtiming	= &smartq7_lcd_timing,
+	.win[0]		= &smartq7_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VCLK,
+};
+
+static struct platform_device *smartq7_devices[] __initdata = {
+	&smartq7_leds_device,
+	&smartq7_buttons_device,
+};
+
+static void __init smartq7_machine_init(void)
+{
+	s3c_fb_set_platdata(&smartq7_lcd_pdata);
+
+	smartq_machine_init();
+
+	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
+}
+
+MACHINE_START(SMARTQ7, "SmartQ 7")
+	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smartq_map_io,
+	.init_machine	= smartq7_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
new file mode 100644
index 000000000..76b0a8846
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk2410.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2004 by FS Forth-Systeme GmbH
+// All rights reserved.
+//
+// @Author: Jonas Dietsche
+//
+// @History:
+// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2410_iodesc[] __initdata = {
+  /* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+static struct platform_device *smdk2410_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+};
+
+static void __init smdk2410_map_io(void)
+{
+	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
+	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init smdk2410_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
+				    * to SMDK2410 */
+	/* Maintainer: Jonas Dietsche */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= smdk2410_map_io,
+	.init_irq	= s3c2410_init_irq,
+	.init_machine	= smdk2410_init,
+	.init_time	= smdk2410_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
new file mode 100644
index 000000000..2b4e20aaa
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk2413.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
+// loans of SMDK2413 to work with.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio/machine.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2413_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+};
+
+static struct gpiod_lookup_table smdk2413_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device *smdk2413_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
+};
+
+static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
+{
+	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+		memblock_add(0x30000000, SZ_64M);
+	}
+}
+
+static void __init smdk2413_map_io(void)
+{
+	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
+	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init smdk2413_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init smdk2413_machine_init(void)
+{	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	gpiod_add_lookup_table(&smdk2413_udc_gpio_table);
+ 	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(S3C2413, "S3C2413")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c2412_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.init_time	= s3c24xx_timer_init,
+MACHINE_END
+
+MACHINE_START(SMDK2412, "SMDK2412")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c2412_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.init_time	= s3c24xx_timer_init,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c2412_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.init_time	= smdk2413_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
new file mode 100644
index 000000000..329fe26be
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk2416.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+//	as part of OpenInkpot project
+// Copyright (c) 2009 Promwad Innovation Company
+//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <video/samsung_fimd.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "regs-s3c2443-clock.h"
+#include "gpio-samsung.h"
+
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include "sdhci.h"
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/s3c-hsudc.h>
+
+#include "fb.h"
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2416_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON (S3C2410_UCON_DEFAULT	| \
+		S3C2440_UCON_PCLK	| \
+		S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+
+#define UFCON (S3C2410_UFCON_RXTRIG8	| \
+		S3C2410_UFCON_FIFOMODE	| \
+		S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON | 0x50,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+static void smdk2416_hsudc_gpio_init(void)
+{
+	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
+	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
+}
+
+static void smdk2416_hsudc_gpio_uninit(void)
+{
+	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
+	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
+}
+
+static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
+	.epnum = 9,
+	.gpio_init = smdk2416_hsudc_gpio_init,
+	.gpio_uninit = smdk2416_hsudc_gpio_uninit,
+};
+
+static struct s3c_fb_pd_win smdk2416_fb_win[] = {
+	[0] = {
+		.default_bpp	= 16,
+		.max_bpp	= 32,
+		.xres           = 800,
+		.yres           = 480,
+	},
+};
+
+static struct fb_videomode smdk2416_lcd_timing = {
+	.pixclock	= 41094,
+	.left_margin	= 8,
+	.right_margin	= 13,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres           = 800,
+	.yres           = 480,
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+	.win[0]		= &smdk2416_fb_win[0],
+	.vtiming	= &smdk2416_lcd_timing,
+	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C2410_GPF(1),
+	.ext_cd_gpio_invert	= 1,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_NONE,
+};
+
+static struct platform_device *smdk2416_devices[] __initdata = {
+	&s3c_device_fb,
+	&s3c_device_wdt,
+	&s3c_device_ohci,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_usb_hsudc,
+	&s3c2443_device_dma,
+};
+
+static void __init smdk2416_init_time(void)
+{
+	s3c2416_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init smdk2416_map_io(void)
+{
+	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
+	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init smdk2416_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk2416_fb_platdata);
+
+	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
+
+	s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
+
+	gpio_request(S3C2410_GPB(4), "USBHost Power");
+	gpio_direction_output(S3C2410_GPB(4), 1);
+
+	gpio_request(S3C2410_GPB(3), "Display Power");
+	gpio_direction_output(S3C2410_GPB(3), 1);
+
+	gpio_request(S3C2410_GPB(1), "Display Reset");
+	gpio_direction_output(S3C2410_GPB(1), 1);
+
+	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2416, "SMDK2416")
+	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2416,
+
+	.init_irq	= s3c2416_init_irq,
+	.map_io		= smdk2416_map_io,
+	.init_machine	= smdk2416_machine_init,
+	.init_time	= smdk2416_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
new file mode 100644
index 000000000..6aea769eb
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk2440.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+// linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.fluff.org/ben/smdk2440/
+//
+// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
+
+	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+			  S3C2410_LCDCON5_INVVLINE |
+			  S3C2410_LCDCON5_INVVFRAME |
+			  S3C2410_LCDCON5_PWREN |
+			  S3C2410_LCDCON5_HWSWP,
+
+	.type		= S3C2410_LCDCON1_TFT,
+
+	.width		= 240,
+	.height		= 320,
+
+	.pixclock	= 166667, /* HCLK 60 MHz, divisor 10 */
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+	.left_margin	= 20,
+	.right_margin	= 8,
+	.hsync_len	= 4,
+	.upper_margin	= 8,
+	.lower_margin	= 7,
+	.vsync_len	= 4,
+};
+
+static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
+	.displays	= &smdk2440_lcd_cfg,
+	.num_displays	= 1,
+	.default_display = 0,
+
+#if 0
+	/* currently setup by downloader */
+	.gpccon		= 0xaa940659,
+	.gpccon_mask	= 0xffffffff,
+	.gpcup		= 0x0000ffff,
+	.gpcup_mask	= 0xffffffff,
+	.gpdcon		= 0xaa84aaa0,
+	.gpdcon_mask	= 0xffffffff,
+	.gpdup		= 0x0000faff,
+	.gpdup_mask	= 0xffffffff,
+
+	.gpccon_reg	= S3C2410_GPCCON,
+	.gpcup_reg	= S3C2410_GPCUP,
+	.gpdcon_reg	= S3C2410_GPDCON,
+	.gpdup_reg	= S3C2410_GPDUP,
+#endif
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+};
+
+static void __init smdk2440_map_io(void)
+{
+	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init smdk2440_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	s3c24xx_timer_init();
+}
+
+static void __init smdk2440_machine_init(void)
+{
+	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+	s3c_i2c0_set_platdata(NULL);
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+
+	.init_irq	= s3c2440_init_irq,
+	.map_io		= smdk2440_map_io,
+	.init_machine	= smdk2440_machine_init,
+	.init_time	= smdk2440_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
new file mode 100644
index 000000000..075140f8f
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk2443.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2007 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.fluff.org/ben/smdk2443/
+//
+// Thanks to Samsung for the loan of an SMDK2443
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2443_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct platform_device *smdk2443_devices[] __initdata = {
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc1,
+	&s3c2443_device_dma,
+};
+
+static void __init smdk2443_map_io(void)
+{
+	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
+	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init smdk2443_init_time(void)
+{
+	s3c2443_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init smdk2443_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2443, "SMDK2443")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2443,
+	.init_irq	= s3c2443_init_irq,
+	.map_io		= smdk2443_map_io,
+	.init_machine	= smdk2443_machine_init,
+	.init_time	= smdk2443_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
new file mode 100644
index 000000000..a3c1b2a82
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk6400.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "irqs.h"
+#include "map.h"
+
+#include "devs.h"
+#include "cpu.h"
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "gpio-samsung.h"
+
+#include "s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
new file mode 100644
index 000000000..e57b2bb61
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-smdk6410.c
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "irqs.h"
+#include "map.h"
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "fb.h"
+#include "gpio-cfg.h"
+
+#include "devs.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-adc.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include "keypad.h"
+
+#include "backlight-s3c64xx.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		gpio_direction_output(S3C64XX_GPF(13), 1);
+
+		/* fire nRESET on power up */
+		gpio_direction_output(S3C64XX_GPN(5), 0);
+		msleep(10);
+		gpio_direction_output(S3C64XX_GPN(5), 1);
+		msleep(1);
+	} else {
+		gpio_direction_output(S3C64XX_GPF(13), 0);
+	}
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+	.set_power	= smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.xres		= 800,
+	.yres		= 480,
+	.virtual_y	= 480 * 2,
+	.virtual_x	= 800,
+};
+
+static struct fb_videomode smdk6410_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 13,
+	.upper_margin	= 7,
+	.lower_margin	= 5,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.xres		= 800,
+	.yres		= 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.vtiming	= &smdk6410_lcd_timing,
+	.win[0]		= &smdk6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ *  2) CFG6 needs to be switched to "LAN9115" side
+ */
+
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
+	[1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
+					| IRQ_TYPE_LEVEL_LOW),
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	REGULATOR_SUPPLY("PVDD", "0-001b"),
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+};
+
+static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+	.setup_gpio	= s3c64xx_ide_setup_gpio,
+};
+
+static uint32_t smdk6410_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
+	.keymap		= smdk6410_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk6410_keymap),
+};
+
+static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
+	.keymap_data	= &smdk6410_keymap_data,
+	.rows		= 2,
+	.cols		= 8,
+};
+
+static struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+	&s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+	&s3c_device_hsmmc1,
+#endif
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&samsung_device_pwm,
+	&s3c_device_usb_hsotg,
+	&s3c64xx_device_iisv4,
+	&samsung_device_keypad,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
+	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+	&s3c_device_adc,
+	&s3c_device_cfcon,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+};
+
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+	REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+	.consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddint = {
+	.constraints = {
+		.name = "PVDD_INT",
+		.min_uV = 1000000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+};
+
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
+	.constraints = {
+		.name = "PVDD_HI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
+	.constraints = {
+		.name = "PVDD_PLL",
+		.always_on = 1,
+	},
+};
+
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
+	.constraints = {
+		.name = "PVDD_UH+PVDD_MMC",
+		.always_on = 1,
+	},
+};
+
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
+	.constraints = {
+		.name = "PVCCM3BT",
+		.always_on = 1,
+	},
+};
+
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
+	.constraints = {
+		.name = "PVCCM2MTV",
+		.always_on = 1,
+	},
+};
+
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
+	.constraints = {
+		.name = "PVDD_OTGI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.always_on = 1,
+	},
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.always_on = 1,
+	},
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
+	.constraints = {
+		.name = "PVDD_AUDIO",
+		.always_on = 1,
+	},
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT+PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		},
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	REGULATOR_SUPPLY("DVDD", "0-001b"),
+};
+
+static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI+HPVDD+AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &smdk6410_vddarm },
+	{ WM8350_LDO_1, &smdk6410_vddalive },
+	{ WM8350_LDO_2, &smdk6410_vddotg },
+	{ WM8350_LDO_3, &smdk6410_vddlcd },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+	.irq_base = IRQ_BOARD_START,
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+	{
+		.name = "PMIC:red:power",
+		.gpio = GPIO_BOARD_START + 3,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+	.leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+	.name          = "leds-gpio",
+	.id            = -1,
+	.dev = {
+		.platform_data = &wm1192_pmic_led,
+	},
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+	int ret;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	ret = platform_device_register(&wm1192_pmic_led_dev);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+	return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+	.isink = 1,
+	.max_uA = 27554,
+};
+
+static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
+	.constraints = {
+		.name = "PVDD_MEM+PVDD_GPS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+	REGULATOR_SUPPLY("DVDD", "0-001b"),   /* WM8580 */
+};
+
+static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
+	.constraints = {
+		.name = "PVDD_LCD+PVDD_EXT",
+		.always_on = 1,
+	},
+	.consumer_supplies = wm1192_ldo1_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+	.name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+	.name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+	.pre_init = wm1192_pre_init,
+
+	.backlight = &wm1192_backlight_pdata,
+	.dcdc = {
+		&smdk6410_vddarm,  /* DCDC1 */
+		&smdk6410_vddint,  /* DCDC2 */
+		&wm1192_dcdc3,
+	},
+	.gpio_base = GPIO_BOARD_START,
+	.ldo = {
+		 &wm1192_ldo1,        /* LDO1 */
+		 &smdk6410_vdduh_mmc, /* LDO2 */
+		 NULL,                /* LDO3 NC */
+		 &smdk6410_vddotgi,   /* LDO4 */
+		 &smdk6410_vddotg,    /* LDO5 */
+		 &smdk6410_vddhi,     /* LDO6 */
+		 &smdk6410_vddaudio,  /* LDO7 */
+		 &smdk6410_vccm2mtv,  /* LDO8 */
+		 &smdk6410_vddpll,    /* LDO9 */
+		 &smdk6410_vccmc3bt,  /* LDO10 */
+		 &smdk6410_vddalive,  /* LDO11 */
+	},
+	.status = {
+		&wm1192_led7_pdata,
+		&wm1192_led8_pdata,
+	},
+};
+#endif
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &smdk6410_wm1192_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
+	.no = S3C64XX_GPF(15),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data smdk6410_bl_data = {
+	/* Intentionally blank */
+};
+
+static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
+
+static void __init smdk6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+	s3c64xx_set_xtal_freq(12000000);
+	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void __init smdk6410_machine_init(void)
+{
+	u32 cs1;
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+	dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
+
+	samsung_keypad_set_platdata(&smdk6410_keypad_data);
+
+	s3c64xx_ts_set_platdata(NULL);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+						   S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPN(5), "LCD power");
+	gpio_request(S3C64XX_GPF(13), "LCD power");
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
+	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+
+	pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
+	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smdk6410_map_io,
+	.init_machine	= smdk6410_machine_init,
+	.init_time	= s3c64xx_timer_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
new file mode 100644
index 000000000..93ab1abd8
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-tct_hammer.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2007 TinCanTools
+//	David Anders <danders@amltd.com>
+//
+// @History:
+// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/gpio/machine.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "devs.h"
+#include "cpu.h"
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include "s3c24xx.h"
+
+static struct resource tct_hammer_nor_resource =
+			DEFINE_RES_MEM(0x00000000, SZ_16M);
+
+static struct mtd_partition tct_hammer_mtd_partitions[] = {
+	{
+		.name		= "System",
+		.size		= 0x240000,
+		.offset		= 0,
+		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "JFFS2",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tct_hammer_flash_data = {
+	.width		= 2,
+	.parts		= tct_hammer_mtd_partitions,
+	.nr_parts	= ARRAY_SIZE(tct_hammer_mtd_partitions),
+};
+
+static struct platform_device tct_hammer_device_nor = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+			.platform_data = &tct_hammer_flash_data,
+		},
+	.num_resources	= 1,
+	.resource	= &tct_hammer_nor_resource,
+};
+
+static struct map_desc tct_hammer_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
+	.dev_id = "s3c2410-sdi",
+	.table = {
+		/* bus pins */
+		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device *tct_hammer_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_ohci,
+	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+	&s3c_device_sdi,
+	&tct_hammer_device_nor,
+};
+
+static void __init tct_hammer_map_io(void)
+{
+	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
+	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init tct_hammer_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
+	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
+}
+
+MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= tct_hammer_map_io,
+	.init_irq	= s3c2410_init_irq,
+	.init_machine	= tct_hammer_init,
+	.init_time	= tct_hammer_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
new file mode 100644
index 000000000..c85033e6e
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-vr1000.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2008 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// Machine support for Thorcom VR1000 board. Designed for Thorcom by
+// Simtec Electronics, http://www.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/dm9000.h>
+#include <linux/i2c.h>
+
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include "cpu.h"
+#include "devs.h"
+
+#include "bast.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+#include "vr1000.h"
+
+/* macros for virtual address mods for the io space entries */
+#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
+#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
+#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
+#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
+
+/* macros to modify the physical addresses for io space */
+
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
+
+static struct map_desc vr1000_iodesc[] __initdata = {
+  /* ISA IO areas */
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= PA_CS2(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
+
+  /*  CPLD control registers, and external interrupt controls */
+  {
+	  .virtual	= (u32)VR1000_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL1),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL2),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL3,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL3),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL4,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL4),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* port 2 is not actually used */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* definitions for the vr1000 extra 16550 serial ports */
+
+#define VR1000_BAUDBASE (3692307)
+
+#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.mapbase	= VR1000_SERIAL_MAPBASE(0),
+		.irq		= VR1000_IRQ_SERIAL + 0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= VR1000_BAUDBASE,
+	},
+	[1] = {
+		.mapbase	= VR1000_SERIAL_MAPBASE(1),
+		.irq		= VR1000_IRQ_SERIAL + 1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= VR1000_BAUDBASE,
+	},
+	[2] = {
+		.mapbase	= VR1000_SERIAL_MAPBASE(2),
+		.irq		= VR1000_IRQ_SERIAL + 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= VR1000_BAUDBASE,
+	},
+	[3] = {
+		.mapbase	= VR1000_SERIAL_MAPBASE(3),
+		.irq		= VR1000_IRQ_SERIAL + 3,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= VR1000_BAUDBASE,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+/* DM9000 ethernet devices */
+
+static struct resource vr1000_dm9k0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
+	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct resource vr1000_dm9k1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
+	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+/* for the moment we limit ourselves to 16bit IO until some
+ * better IO routines can be written and tested
+*/
+
+static struct dm9000_plat_data vr1000_dm9k_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device vr1000_dm9k0 = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(vr1000_dm9k0_resource),
+	.resource	= vr1000_dm9k0_resource,
+	.dev		= {
+		.platform_data = &vr1000_dm9k_platdata,
+	}
+};
+
+static struct platform_device vr1000_dm9k1 = {
+	.name		= "dm9000",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(vr1000_dm9k1_resource),
+	.resource	= vr1000_dm9k1_resource,
+	.dev		= {
+		.platform_data = &vr1000_dm9k_platdata,
+	}
+};
+
+/* LEDS */
+
+static struct gpiod_lookup_table vr1000_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct s3c24xx_led_platdata vr1000_led1_pdata = {
+	.name		= "led1",
+	.def_trigger	= "",
+};
+
+static struct s3c24xx_led_platdata vr1000_led2_pdata = {
+	.name		= "led2",
+	.def_trigger	= "",
+};
+
+static struct s3c24xx_led_platdata vr1000_led3_pdata = {
+	.name		= "led3",
+	.def_trigger	= "",
+};
+
+static struct platform_device vr1000_led1 = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &vr1000_led1_pdata,
+	},
+};
+
+static struct platform_device vr1000_led2 = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &vr1000_led2_pdata,
+	},
+};
+
+static struct platform_device vr1000_led3 = {
+	.name		= "s3c24xx_led",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &vr1000_led3_pdata,
+	},
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
+		I2C_BOARD_INFO("tmp101", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41st87", 0x68),
+	},
+};
+
+/* devices for this board */
+
+static struct platform_device *vr1000_devices[] __initdata = {
+	&s3c2410_device_dclk,
+	&s3c_device_ohci,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_adc,
+	&serial_device,
+	&vr1000_dm9k0,
+	&vr1000_dm9k1,
+	&vr1000_led1,
+	&vr1000_led2,
+	&vr1000_led3,
+};
+
+static void vr1000_power_off(void)
+{
+	gpio_direction_output(S3C2410_GPB(9), 1);
+}
+
+static void __init vr1000_map_io(void)
+{
+	pm_power_off = vr1000_power_off;
+
+	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
+	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init vr1000_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	/* Disable pull-up on LED lines and register GPIO lookups */
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&vr1000_led1_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led2_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led3_gpio_table);
+
+	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+
+	i2c_register_board_info(0, vr1000_i2c_devs,
+				ARRAY_SIZE(vr1000_i2c_devs));
+
+	nor_simtec_init();
+	simtec_audio_add(NULL, true, NULL);
+
+	WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
+}
+
+MACHINE_START(VR1000, "Thorcom-VR1000")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
+	.map_io		= vr1000_map_io,
+	.init_machine	= vr1000_init,
+	.init_irq	= s3c2410_init_irq,
+	.init_time	= vr1000_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
new file mode 100644
index 000000000..6f878418b
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-vstms.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+//
+// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#include "s3c24xx.h"
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct mtd_partition __initdata vstms_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= 0x7C000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "UBoot Config",
+		.offset = 0x7C000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "Kernel",
+		.offset = 0x80000,
+		.size	= 0x200000,
+	},
+	[3] = {
+		.name	= "RFS",
+		.offset	= 0x280000,
+		.size	= 0x3d80000,
+	},
+};
+
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
+		.partitions	= vstms_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
+	.sets		= vstms_nand_sets,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+	&s3c2412_device_dma,
+};
+
+static void __init vstms_fixup(struct tag *tags, char **cmdline)
+{
+	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+		memblock_add(0x30000000, SZ_64M);
+	}
+}
+
+static void __init vstms_map_io(void)
+{
+	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+}
+
+static void __init vstms_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init vstms_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&vstms_nand_info);
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
+
+	.fixup		= vstms_fixup,
+	.init_irq	= s3c2412_init_irq,
+	.init_machine	= vstms_init,
+	.map_io		= vstms_map_io,
+	.init_time	= vstms_init_time,
+MACHINE_END
diff --git a/arch/arm/mach-s3c/map-base.h b/arch/arm/mach-s3c/map-base.h
new file mode 100644
index 000000000..463a995b3
--- /dev/null
+++ b/arch/arm/mach-s3c/map-base.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - Memory map definitions (virtual addresses)
+ */
+
+#ifndef __ASM_PLAT_MAP_H
+#define __ASM_PLAT_MAP_H __FILE__
+
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
+ * little of the VA space as possible so vmalloc and friends have a
+ * better chance of getting memory.
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ */
+
+#define S3C_ADDR_BASE	0xF6000000
+
+#ifndef __ASSEMBLY__
+#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
+#else
+#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
+#endif
+
+#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
+#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
+#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
+#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
+#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
+
+/* ISA device mapping for BAST to use with inb()/outb() on 8-bit I/O.
+ * 16-bit I/O on BAST now requires driver modifications to manually
+ * ioremap CS3.
+ */
+#define S3C24XX_VA_ISA_BYTE	PCI_IOBASE
+
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
+#endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/mach-s3c/map-s3c.h b/arch/arm/mach-s3c/map-s3c.h
new file mode 100644
index 000000000..a18fdd3d6
--- /dev/null
+++ b/arch/arm/mach-s3c/map-s3c.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ */
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#include "map.h"
+
+#define S3C24XX_VA_IRQ		S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
+#define S3C24XX_VA_UART		S3C_VA_UART
+
+#define S3C24XX_VA_TIMER	S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
+
+#define S3C2410_PA_UART		(0x50000000)
+#define S3C24XX_PA_UART		S3C2410_PA_UART
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO		(0x56000000)
+#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include "map-s5p.h"
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h
new file mode 100644
index 000000000..f8d075b11
--- /dev/null
+++ b/arch/arm/mach-s3c/map-s3c24xx.h
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include "map-base.h"
+#include "map-s3c.h"
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ		(0x4A000000)
+#define S3C24XX_SZ_IRQ		SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL	(0x48000000)
+#define S3C24XX_SZ_MEMCTRL	SZ_1M
+
+/* Timers */
+#define S3C2410_PA_TIMER	(0x51000000)
+#define S3C24XX_SZ_TIMER	SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR	SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV	(0x52000000)
+#define S3C24XX_SZ_USBDEV	SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG	(0x53000000)
+#define S3C24XX_SZ_WATCHDOG	SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART		SZ_1M
+#define S3C24XX_SZ_IIS		SZ_1M
+#define S3C24XX_SZ_ADC		SZ_1M
+#define S3C24XX_SZ_SPI		SZ_1M
+#define S3C24XX_SZ_SDI		SZ_1M
+#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C24XX_SZ_GPIO		SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+
+/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
+#define S3C2416_PA_HSUDC	(0x49800000)
+#define S3C2416_SZ_HSUDC	(SZ_4K)
+
+/* DMA controller */
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+
+/* LCD controller */
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND	   (0x4E000000)
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC	   (0x54000000)
+
+/* IIS controller */
+#define S3C2410_PA_IIS	   (0x55000000)
+
+/* RTC */
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC	   (0x58000000)
+
+/* SPI */
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
+#define S3C2410_SPI1		(0x20)
+#define S3C2412_SPI1		(0x100)
+
+/* SDI */
+#define S3C2410_PA_SDI	   (0x5A000000)
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97	   (0x5B000000)
+#define S3C2440_SZ_AC97	   SZ_1M
+
+/* S3C2443/S3C2416 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC   (0x4A800000)
+#define S3C2416_PA_HSMMC0  (0x4AC00000)
+
+#define	S3C2443_PA_FB	(0x4C800000)
+
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SPI1		(S3C2410_PA_SPI + S3C2410_SPI1)
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
+
+#define S3C_PA_FB	    S3C2443_PA_FB
+#define S3C_PA_IIC          S3C2410_PA_IIC
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
+#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
+#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
+#define S3C_PA_NAND	    S3C24XX_PA_NAND
+
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
+#define SAMSUNG_PA_TIMER	S3C2410_PA_TIMER
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c/map-s3c64xx.h b/arch/arm/mach-s3c/map-s3c64xx.h
new file mode 100644
index 000000000..9de1c58bc
--- /dev/null
+++ b/arch/arm/mach-s3c/map-s3c64xx.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include "map-base.h"
+#include "map-s3c.h"
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART		(0x7F005000)
+#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
+#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
+#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
+#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET		(0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0		S3C_VA_UARTx(0)
+#define S3C_VA_UART1		S3C_VA_UARTx(1)
+#define S3C_VA_UART2		S3C_VA_UARTx(2)
+#define S3C_VA_UART3		S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM		(0x70000000)
+
+#define S3C64XX_PA_ONENAND0	(0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF	(0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+   (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1	(0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF	(0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF	(SZ_64M)
+
+#define S3C64XX_PA_NAND		(0x70200000)
+#define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
+#define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_KEYPAD	(0x7E00A000)
+#define S3C64XX_PA_ADC		(0x7E00B000)
+#define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
+#define S3C64XX_PA_TIMER	(0x7F006000)
+#define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_SPI0		(0x7F00B000)
+#define S3C64XX_PA_SPI1		(0x7F00C000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
+#define S3C64XX_PA_IIC1		(0x7F00F000)
+
+#define S3C64XX_PA_GPIO		(0x7F008000)
+#define S3C64XX_SZ_GPIO		SZ_4K
+
+#define S3C64XX_PA_SDRAM	(0x50000000)
+
+#define S3C64XX_PA_CFCON	(0x70300000)
+
+#define S3C64XX_PA_VIC0		(0x71200000)
+#define S3C64XX_PA_VIC1		(0x71300000)
+
+#define S3C64XX_PA_MODEM	(0x74108000)
+
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+
+/* compatibility defines. */
+#define S3C_PA_TIMER		S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC		S3C64XX_PA_IIC0
+#define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
+#define S3C_PA_ONENAND		S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF	S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF	S3C64XX_SZ_ONENAND0_BUF
+#define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_PA_RTC		S3C64XX_PA_RTC
+#define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0		S3C64XX_PA_SPI0
+#define S3C_PA_SPI1		S3C64XX_PA_SPI1
+
+#define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER	S3C64XX_PA_TIMER
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c/map-s5p.h b/arch/arm/mach-s3c/map-s5p.h
new file mode 100644
index 000000000..cd237924e
--- /dev/null
+++ b/arch/arm/mach-s3c/map-s5p.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ */
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+#define VA_VIC2			VA_VIC(2)
+#define VA_VIC3			VA_VIC(3)
+
+#include "map-s3c.h"
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
new file mode 100644
index 000000000..7cfb517d4
--- /dev/null
+++ b/arch/arm/mach-s3c/map.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "map-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "map-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/nand-core-s3c24xx.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
new file mode 100644
index 000000000..a14316729
--- /dev/null
+++ b/arch/arm/mach-s3c/nand-core-s3c24xx.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C -  Nand Controller core functions
+ */
+
+#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H
+#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+	s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/onenand-core-s3c64xx.h b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
new file mode 100644
index 000000000..e2dfdd1fe
--- /dev/null
+++ b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (c) 2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Samsung OneNAD Controller core functions
+ */
+
+#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
+#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_onenand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_ONENAND
+	s3c_device_onenand.name = name;
+#endif
+}
+
+static inline void s3c64xx_onenand1_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+	s3c64xx_device_onenand1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/osiris.h b/arch/arm/mach-s3c/osiris.h
new file mode 100644
index 000000000..b6c9c5ed2
--- /dev/null
+++ b/arch/arm/mach-s3c/osiris.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ * OSIRIS - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL		(0x3)
+#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
+#define OSIRIS_CTRL0_PCMCIA		(1<<4)
+#define OSIRIS_CTRL0_FIX8		(1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
+
+#define OSIRIS_CTRL1_FIX8		(1<<0)
+
+#define OSIRIS_ID_REVMASK		(0x7)
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
+
+#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
+#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
+#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
+
+#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
+#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
+#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
+#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
+
+#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c/otom.h b/arch/arm/mach-s3c/otom.h
new file mode 100644
index 000000000..c800f67d0
--- /dev/null
+++ b/arch/arm/mach-s3c/otom.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (c) 2005 Guillaume GOURAT / NexVision
+ *          guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ */
+
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
+
+#define OTOM_PA_CS8900A_BASE	(S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE	S3C2410_ADDR(0x04000000)	/* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE	(S3C2410_CS0)
+
+#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c/pl080.c b/arch/arm/mach-s3c/pl080.c
new file mode 100644
index 000000000..0a14f77b2
--- /dev/null
+++ b/arch/arm/mach-s3c/pl080.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+//
+// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include "cpu.h"
+#include "irqs.h"
+#include "map.h"
+
+#include "regs-sys-s3c64xx.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+	return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+	{
+		.bus_id = "uart0_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_tx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_rx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_tx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_rx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_tx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_rx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_tx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_rx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.periph_buses = PL08X_AHB2,
+	}
+};
+
+static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
+	{ "s3c6400-uart.0", "tx", &s3c64xx_dma0_info[0] },
+	{ "s3c6400-uart.0", "rx", &s3c64xx_dma0_info[1] },
+	{ "s3c6400-uart.1", "tx", &s3c64xx_dma0_info[2] },
+	{ "s3c6400-uart.1", "rx", &s3c64xx_dma0_info[3] },
+	{ "s3c6400-uart.2", "tx", &s3c64xx_dma0_info[4] },
+	{ "s3c6400-uart.2", "rx", &s3c64xx_dma0_info[5] },
+	{ "s3c6400-uart.3", "tx", &s3c64xx_dma0_info[6] },
+	{ "s3c6400-uart.3", "rx", &s3c64xx_dma0_info[7] },
+	{ "samsung-pcm.0", "tx", &s3c64xx_dma0_info[8] },
+	{ "samsung-pcm.0", "rx", &s3c64xx_dma0_info[9] },
+	{ "samsung-i2s.0", "tx", &s3c64xx_dma0_info[10] },
+	{ "samsung-i2s.0", "rx", &s3c64xx_dma0_info[11] },
+	{ "s3c6410-spi.0", "tx", &s3c64xx_dma0_info[12] },
+	{ "s3c6410-spi.0", "rx", &s3c64xx_dma0_info[13] },
+	{ "samsung-i2s.2", "tx", &s3c64xx_dma0_info[14] },
+	{ "samsung-i2s.2", "rx", &s3c64xx_dma0_info[15] },
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+	.memcpy_burst_size = PL08X_BURST_SZ_4,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma0_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+	.slave_map = s3c64xx_dma0_slave_map,
+	.slave_map_len = ARRAY_SIZE(s3c64xx_dma0_slave_map),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+			0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+	{
+		.bus_id = "pcm1_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm1_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_out",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_in",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_mic",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pwm",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "external",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
+	{ "samsung-pcm.1", "tx", &s3c64xx_dma1_info[0] },
+	{ "samsung-pcm.1", "rx", &s3c64xx_dma1_info[1] },
+	{ "samsung-i2s.1", "tx", &s3c64xx_dma1_info[2] },
+	{ "samsung-i2s.1", "rx", &s3c64xx_dma1_info[3] },
+	{ "s3c6410-spi.1", "tx", &s3c64xx_dma1_info[4] },
+	{ "s3c6410-spi.1", "rx", &s3c64xx_dma1_info[5] },
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+	.memcpy_burst_size = PL08X_BURST_SZ_4,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma1_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+	.slave_map = s3c64xx_dma1_slave_map,
+	.slave_map_len = ARRAY_SIZE(s3c64xx_dma1_slave_map),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+			0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+	if (!soc_is_s3c64xx())
+		return 0;
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C64XX_SDMA_SEL);
+
+	if (of_have_populated_dt())
+		return 0;
+
+	amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+	amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s3c64xx_pl080_init);
diff --git a/arch/arm/mach-s3c/platformdata.c b/arch/arm/mach-s3c/platformdata.c
new file mode 100644
index 000000000..e643c81ae
--- /dev/null
+++ b/arch/arm/mach-s3c/platformdata.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+//
+// Helper for platform data setting
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include "devs.h"
+#include "sdhci.h"
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev)
+{
+	void *npd;
+
+	if (!pd) {
+		/* too early to use dev_name(), may not be registered */
+		printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+		return NULL;
+	}
+
+	npd = kmemdup(pd, pdsize, GFP_KERNEL);
+	if (!npd)
+		return NULL;
+
+	pdev->dev.platform_data = npd;
+	return npd;
+}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+			     struct s3c_sdhci_platdata *set)
+{
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+	if (pd->max_width)
+		set->max_width = pd->max_width;
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->host_caps2)
+		set->host_caps2 |= pd->host_caps2;
+	if (pd->pm_caps)
+		set->pm_caps |= pd->pm_caps;
+}
diff --git a/arch/arm/mach-s3c/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
new file mode 100644
index 000000000..3fbc99eaa
--- /dev/null
+++ b/arch/arm/mach-s3c/pll-s3c2410.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006-2007 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//	Vincent Sanders <vince@arm.linux.org.uk>
+//
+// S3C2410 CPU PLL tables
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
+    { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
+    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
+    { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .driver_data = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .driver_data = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct subsys_interface s3c2410_plls_interface = {
+	.name		= "s3c2410_plls",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return subsys_interface_register(&s3c2410_plls_interface);
+
+}
+arch_initcall(s3c2410_pll_init);
+
+static struct subsys_interface s3c2410a_plls_interface = {
+	.name		= "s3c2410a_plls",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return subsys_interface_register(&s3c2410a_plls_interface);
+}
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
new file mode 100644
index 000000000..fdb8e8c2f
--- /dev/null
+++ b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2007 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//	Vincent Sanders <vince@arm.linux.org.uk>
+//
+// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table s3c2440_plls_12[] = {
+	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.driver_data = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.driver_data = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.driver_data = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.driver_data = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.driver_data = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.driver_data = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.driver_data = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.driver_data = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.driver_data = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.driver_data = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.driver_data = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.driver_data = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.driver_data = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.driver_data = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.driver_data = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.driver_data = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.driver_data = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.driver_data = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.driver_data = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.driver_data = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.driver_data = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.driver_data = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.driver_data = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.driver_data = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.driver_data = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct subsys_interface s3c2440_plls12_interface = {
+	.name		= "s3c2440_plls12",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return subsys_interface_register(&s3c2440_plls12_interface);
+
+}
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct subsys_interface s3c2442_plls12_interface = {
+	.name		= "s3c2442_plls12",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return subsys_interface_register(&s3c2442_plls12_interface);
+
+}
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
new file mode 100644
index 000000000..438b6fc09
--- /dev/null
+++ b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2008 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//	Vincent Sanders <vince@arm.linux.org.uk>
+//
+// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
+	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.driver_data = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.driver_data = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.driver_data = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.driver_data = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.driver_data = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.driver_data = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.driver_data = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.driver_data = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.driver_data = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.driver_data = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.driver_data = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.driver_data = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.driver_data = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.driver_data = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.driver_data = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.driver_data = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.driver_data = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.driver_data = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.driver_data = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.driver_data = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.driver_data = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.driver_data = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.driver_data = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.driver_data = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.driver_data = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.driver_data = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.driver_data = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.driver_data = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.driver_data = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.driver_data = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.driver_data = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.driver_data = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.driver_data = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.driver_data = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.driver_data = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.driver_data = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.driver_data = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.driver_data = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.driver_data = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.driver_data = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.driver_data = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.driver_data = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.driver_data = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.driver_data = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.driver_data = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.driver_data = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.driver_data = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.driver_data = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.driver_data = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.driver_data = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.driver_data = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.driver_data = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.driver_data = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct device *dev,
+				  struct subsys_interface *sif)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct subsys_interface s3c2440_plls169344_interface = {
+	.name		= "s3c2440_plls169344",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return subsys_interface_register(&s3c2440_plls169344_interface);
+}
+arch_initcall(s3c2440_pll_16934400);
+
+static struct subsys_interface s3c2442_plls169344_interface = {
+	.name		= "s3c2442_plls169344",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return subsys_interface_register(&s3c2442_plls169344_interface);
+}
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c/pm-common.c b/arch/arm/mach-s3c/pm-common.c
new file mode 100644
index 000000000..618bd4499
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-common.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Samsung Electronics Co., Ltd.
+//	Tomasz Figa <t.figa@samsung.com>
+// Copyright (C) 2008 Openmoko, Inc.
+// Copyright (C) 2004-2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Samsung common power management helper functions.
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "pm-common.h"
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = readl_relaxed(ptr->reg);
+		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		pr_debug("restore %p (restore %08lx, was %08x)\n",
+				ptr->reg, ptr->val, readl_relaxed(ptr->reg));
+
+		writel_relaxed(ptr->val, ptr->reg);
+	}
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++)
+		writel_relaxed(ptr->val, ptr->reg);
+}
diff --git a/arch/arm/mach-s3c/pm-common.h b/arch/arm/mach-s3c/pm-common.h
new file mode 100644
index 000000000..18b9607e1
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-common.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *	Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __PLAT_SAMSUNG_PM_COMMON_H
+#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
+
+#include <linux/irq.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
+
+#endif
diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
new file mode 100644
index 000000000..a71ed5711
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-core-s3c24xx.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "regs-clock.h"
+#include "regs-irq-s3c24xx.h"
+#include "irqs.h"
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+	/* re-start uart clocks */
+	tmp |= S3C2410_CLKCON_UART0;
+	tmp |= S3C2410_CLKCON_UART1;
+	tmp |= S3C2410_CLKCON_UART2;
+
+	__raw_writel(tmp, S3C2410_CLKCON);
+	udelay(10);
+#endif
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+	/* ack any outstanding external interrupts before we go to sleep */
+
+	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
+					   unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if (which & (1L<<i)) {
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+		  __raw_readl(S3C2410_SRCPND),
+		  __raw_readl(S3C2410_EINTPEND));
+
+	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+				s3c_irqwake_intmask);
+
+	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+				s3c_irqwake_eintmask);
+}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_intallow	(1L << 30 | 0xfL)
+#define s3c_irqwake_eintallow	(0x0000fff0L)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
diff --git a/arch/arm/mach-s3c/pm-core-s3c64xx.h b/arch/arm/mach-s3c/pm-core-s3c64xx.h
new file mode 100644
index 000000000..06f564e5c
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#ifndef __MACH_S3C64XX_PM_CORE_H
+#define __MACH_S3C64XX_PM_CORE_H __FILE__
+
+#include <linux/serial_s3c.h>
+#include <linux/delay.h>
+
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "map.h"
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+#endif
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
+
+static inline void s3c_pm_restored_gpios(void)
+{
+	/* ensure sleep mode has been cleared from the system */
+
+	__raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+	/* turn on the sleep mode and keep it there, as it seems that during
+	 * suspend the xCON registers get re-set and thus you can end up with
+	 * problems between going to sleep and resuming.
+	 */
+
+	__raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
+#endif /* __MACH_S3C64XX_PM_CORE_H */
diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
new file mode 100644
index 000000000..b0e1d277f
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-core.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "pm-core-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "pm-core-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/pm-gpio.c b/arch/arm/mach-s3c/pm-gpio.c
new file mode 100644
index 000000000..cfdbc2337
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// S3C series GPIO PM code
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include "gpio-samsung.h"
+
+#include "gpio-core.h"
+#include "pm.h"
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+	.save	= samsung_gpio_pm_1bit_save,
+	.resume = samsung_gpio_pm_1bit_resume,
+};
+
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+	.save	= samsung_gpio_pm_2bit_save,
+	.resume = samsung_gpio_pm_2bit_resume,
+};
+
+#if defined(CONFIG_ARCH_S3C64XX)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	samsung_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		samsung_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+	.save	= samsung_gpio_pm_4bit_save,
+	.resume = samsung_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
+{
+	struct samsung_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void samsung_pm_save_gpios(void)
+{
+	struct samsung_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
+		if (!ourchip) {
+			gpio_nr++;
+			continue;
+		}
+
+		samsung_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
+{
+	struct samsung_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void samsung_pm_restore_gpios(void)
+{
+	struct samsung_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
+		if (!ourchip) {
+			gpio_nr++;
+			continue;
+		}
+
+		samsung_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/mach-s3c/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
new file mode 100644
index 000000000..3bf668512
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-h1940.S
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 Suspend to RAM
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "map.h"
+
+#include "regs-gpio.h"
+
+	.text
+	.global	h1940_pm_return
+
+h1940_pm_return:
+	mov	r0, #S3C2410_PA_GPIO
+	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
new file mode 100644
index 000000000..a66419883
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c2410.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "gpio-cfg.h"
+#include "cpu.h"
+#include "pm.h"
+
+#include "h1940.h"
+
+static void s3c2410_pm_prepare(void)
+{
+	/* ensure at least GSTATUS3 has the resume address */
+
+	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
+
+	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+	if (machine_is_h1940()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
+	/* RX3715 and RX1950 use similar to H1940 code and the
+	 * same offsets for resume and checksum pointers */
+
+	if (machine_is_rx3715() || machine_is_rx1950()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
+	if (machine_is_aml_m5900()) {
+		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPF(2));
+	}
+
+	if (machine_is_rx1950()) {
+		/* According to S3C2442 user's manual, page 7-17,
+		 * when the system is operating in NAND boot mode,
+		 * the hardware pin configuration - EINT[23:21] –
+		 * must be set as input for starting up after
+		 * wakeup from sleep mode
+		 */
+		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+	}
+}
+
+static void s3c2410_pm_resume(void)
+{
+	unsigned long tmp;
+
+	/* unset the return-from-sleep flag, to ensure reset */
+
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
+
+	if (machine_is_aml_m5900()) {
+		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+		gpio_free(S3C2410_GPF(2));
+	}
+}
+
+struct syscore_ops s3c2410_pm_syscore_ops = {
+	.resume		= s3c2410_pm_resume,
+};
+
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
+
+	return 0;
+}
+
+#if defined(CONFIG_CPU_S3C2410)
+static struct subsys_interface s3c2410_pm_interface = {
+	.name		= "s3c2410_pm",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2410_pm_interface);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct subsys_interface s3c2410a_pm_interface = {
+	.name		= "s3c2410a_pm",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2410a_pm_interface);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct subsys_interface s3c2440_pm_interface = {
+	.name		= "s3c2440_pm",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2440_pm_interface);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2442)
+static struct subsys_interface s3c2442_pm_interface = {
+	.name		= "s3c2442_pm",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2442_pm_interface);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
new file mode 100644
index 000000000..ed3b4cfc7
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c2412.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+
+#include "irqs.h"
+#include "regs-gpio.h"
+
+#include "cpu.h"
+#include "pm.h"
+#include "wakeup-mask.h"
+
+#include "regs-dsc-s3c24xx.h"
+#include "s3c2412-power.h"
+
+extern void s3c2412_sleep_enter(void);
+
+static int s3c2412_cpu_suspend(unsigned long arg)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	s3c2412_sleep_enter();
+
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static const struct samsung_wakeup_mask wake_irqs[] = {
+	{ .irq = IRQ_RTC,	.bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
+};
+
+static void s3c2412_pm_prepare(void)
+{
+	samsung_sync_wakemask(S3C2412_PWRCFG,
+			      wake_irqs, ARRAY_SIZE(wake_irqs));
+}
+
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+	pm_cpu_prep = s3c2412_pm_prepare;
+	pm_cpu_sleep = s3c2412_cpu_suspend;
+
+	return 0;
+}
+
+static struct sleep_save s3c2412_sleep[] = {
+	SAVE_ITEM(S3C2412_DSC0),
+	SAVE_ITEM(S3C2412_DSC1),
+	SAVE_ITEM(S3C2413_GPJDAT),
+	SAVE_ITEM(S3C2413_GPJCON),
+	SAVE_ITEM(S3C2413_GPJUP),
+
+	/* save the PWRCFG to get back to original sleep method */
+
+	SAVE_ITEM(S3C2412_PWRCFG),
+
+	/* save the sleep configuration anyway, just in case these
+	 * get damaged during wakeup */
+
+	SAVE_ITEM(S3C2412_GPBSLPCON),
+	SAVE_ITEM(S3C2412_GPCSLPCON),
+	SAVE_ITEM(S3C2412_GPDSLPCON),
+	SAVE_ITEM(S3C2412_GPFSLPCON),
+	SAVE_ITEM(S3C2412_GPGSLPCON),
+	SAVE_ITEM(S3C2412_GPHSLPCON),
+	SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static struct subsys_interface s3c2412_pm_interface = {
+	.name		= "s3c2412_pm",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_pm_add,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+	return subsys_interface_register(&s3c2412_pm_interface);
+}
+
+arch_initcall(s3c2412_pm_init);
+
+static int s3c2412_pm_suspend(void)
+{
+	s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	return 0;
+}
+
+static void s3c2412_pm_resume(void)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+}
+
+struct syscore_ops s3c2412_pm_syscore_ops = {
+	.suspend	= s3c2412_pm_suspend,
+	.resume		= s3c2412_pm_resume,
+};
diff --git a/arch/arm/mach-s3c/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
new file mode 100644
index 000000000..f69ad84cf
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c2416.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
+
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include "regs-s3c2443-clock.h"
+
+#include "cpu.h"
+#include "pm.h"
+
+#include "s3c2412-power.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern void s3c2412_sleep_enter(void);
+
+static int s3c2416_cpu_suspend(unsigned long arg)
+{
+	/* enable wakeup sources regardless of battery state */
+	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
+
+	/* set the mode as sleep, 2BED represents "Go to BED" */
+	__raw_writel(0x2BED, S3C2443_PWRMODE);
+
+	s3c2412_sleep_enter();
+
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
+}
+
+static void s3c2416_pm_prepare(void)
+{
+	/*
+	 * write the magic value u-boot uses to check for resume into
+	 * the INFORM0 register, and ensure INFORM1 is set to the
+	 * correct address to resume from.
+	 */
+	__raw_writel(0x2BED, S3C2412_INFORM0);
+	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
+}
+
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+	pm_cpu_prep = s3c2416_pm_prepare;
+	pm_cpu_sleep = s3c2416_cpu_suspend;
+
+	return 0;
+}
+
+static struct subsys_interface s3c2416_pm_interface = {
+	.name		= "s3c2416_pm",
+	.subsys		= &s3c2416_subsys,
+	.add_dev	= s3c2416_pm_add,
+};
+
+static __init int s3c2416_pm_init(void)
+{
+	return subsys_interface_register(&s3c2416_pm_interface);
+}
+
+arch_initcall(s3c2416_pm_init);
+#endif
+
+static void s3c2416_pm_resume(void)
+{
+	/* unset the return-from-sleep amd inform flags */
+	__raw_writel(0x0, S3C2443_PWRMODE);
+	__raw_writel(0x0, S3C2412_INFORM0);
+	__raw_writel(0x0, S3C2412_INFORM1);
+}
+
+struct syscore_ops s3c2416_pm_syscore_ops = {
+	.resume		= s3c2416_pm_resume,
+};
diff --git a/arch/arm/mach-s3c/pm-s3c24xx.c b/arch/arm/mach-s3c/pm-s3c24xx.c
new file mode 100644
index 000000000..3a8f5c388
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c24xx.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2004-2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX Power Manager (Suspend-To-RAM) support
+//
+// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information
+//
+// Parts based on arch/arm/mach-pxa/pm.c
+//
+// Thanks to Dimitry Andric for debugging
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
+
+#include <asm/mach/time.h>
+
+#include "gpio-cfg.h"
+#include "pm.h"
+
+#include "regs-mem-s3c24xx.h"
+
+#define PFX "s3c24xx-pm: "
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save core_save[] = {
+	/* we restore the timings here, with the proviso that the board
+	 * brings the system up in an slower, or equal frequency setting
+	 * to the original system.
+	 *
+	 * if we cannot guarantee this, then things are going to go very
+	 * wrong here, as we modify the refresh and both pll settings.
+	 */
+
+	SAVE_ITEM(S3C2410_BWSCON),
+	SAVE_ITEM(S3C2410_BANKCON0),
+	SAVE_ITEM(S3C2410_BANKCON1),
+	SAVE_ITEM(S3C2410_BANKCON2),
+	SAVE_ITEM(S3C2410_BANKCON3),
+	SAVE_ITEM(S3C2410_BANKCON4),
+	SAVE_ITEM(S3C2410_BANKCON5),
+};
+#endif
+
+/* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+	unsigned long irqstate;
+	unsigned long pinstate;
+	int irq = gpio_to_irq(pin);
+
+	if (irqoffs < 4)
+		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+	else
+		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+	pinstate = s3c_gpio_getcfg(pin);
+
+	if (!irqstate) {
+		if (pinstate == S3C2410_GPIO_IRQ)
+			S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
+	} else {
+		if (pinstate == S3C2410_GPIO_IRQ) {
+			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+			s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+		}
+	}
+}
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+	int pin;
+
+	/* for each of the external interrupts (EINT0..EINT15) we
+	 * need to check whether it is an external interrupt source,
+	 * and then configure it as an input if it is not
+	*/
+
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
+	}
+
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+void s3c_pm_restore_core(void)
+{
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+#endif
diff --git a/arch/arm/mach-s3c/pm-s3c64xx.c b/arch/arm/mach-s3c/pm-s3c64xx.c
new file mode 100644
index 000000000..7bc7417fd
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// S3C64XX CPU PM support.
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pm_domain.h>
+
+#include "map.h"
+#include "irqs.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "wakeup-mask.h"
+
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "gpio-samsung.h"
+
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
+
+struct s3c64xx_pm_domain {
+	char *const name;
+	u32 ena;
+	u32 pwr_stat;
+	struct generic_pm_domain pd;
+};
+
+static int s3c64xx_pd_off(struct generic_pm_domain *domain)
+{
+	struct s3c64xx_pm_domain *pd;
+	u32 val;
+
+	pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+	val = __raw_readl(S3C64XX_NORMAL_CFG);
+	val &= ~(pd->ena);
+	__raw_writel(val, S3C64XX_NORMAL_CFG);
+
+	return 0;
+}
+
+static int s3c64xx_pd_on(struct generic_pm_domain *domain)
+{
+	struct s3c64xx_pm_domain *pd;
+	u32 val;
+	long retry = 1000000L;
+
+	pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+	val = __raw_readl(S3C64XX_NORMAL_CFG);
+	val |= pd->ena;
+	__raw_writel(val, S3C64XX_NORMAL_CFG);
+
+	/* Not all domains provide power status readback */
+	if (pd->pwr_stat) {
+		do {
+			cpu_relax();
+			if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
+				break;
+		} while (retry--);
+
+		if (!retry) {
+			pr_err("Failed to start domain %s\n", pd->name);
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+
+static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
+	.name = "IROM",
+	.ena = S3C64XX_NORMALCFG_IROM_ON,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
+	.name = "ETM",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_s = {
+	.name = "S",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_S,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_f = {
+	.name = "F",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_F,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_p = {
+	.name = "P",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_P,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_i = {
+	.name = "I",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_I,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_g = {
+	.name = "G",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_v = {
+	.name = "V",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_V,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
+	&s3c64xx_pm_irom,
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
+	&s3c64xx_pm_etm,
+	&s3c64xx_pm_g,
+	&s3c64xx_pm_v,
+	&s3c64xx_pm_i,
+	&s3c64xx_pm_p,
+	&s3c64xx_pm_s,
+	&s3c64xx_pm_f,
+};
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	int i;
+
+	local_irq_save(flags);
+	for (i = 0; i < 4; i++) {
+		if (clear & (1 << i))
+			gpio_set_value(S3C64XX_GPN(12 + i), 0);
+		if (set & (1 << i))
+			gpio_set_value(S3C64XX_GPN(12 + i), 1);
+	}
+	local_irq_restore(flags);
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+	SAVE_ITEM(S3C64XX_SDMA_SEL),
+	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
+
+	SAVE_ITEM(S3C64XX_NORMAL_CFG),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+#endif
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+static int s3c64xx_cpu_suspend(unsigned long arg)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static const struct samsung_wakeup_mask wake_irqs[] = {
+	{ .irq = IRQ_RTC_ALARM,	.bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
+	{ .irq = IRQ_RTC_TIC,	.bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
+	{ .irq = IRQ_PENDN,	.bit = S3C64XX_PWRCFG_TS_DISABLE, },
+	{ .irq = IRQ_HSMMC0,	.bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
+	{ .irq = IRQ_HSMMC1,	.bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
+	{ .irq = IRQ_HSMMC2,	.bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_BATF_DISABLE},
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_HSI_DISABLE },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
+};
+
+static void s3c64xx_pm_prepare(void)
+{
+	samsung_sync_wakemask(S3C64XX_PWR_CFG,
+			      wake_irqs, ARRAY_SIZE(wake_irqs));
+
+	/* store address of resume. */
+	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+	u32 ucon;
+	u32 ucon_clk
+	u32 save_clk;
+	u32 new_ucon;
+	u32 delta;
+
+	if (!soc_is_s3c64xx())
+		return;
+
+	ucon = __raw_readl(regs + S3C2410_UCON);
+	ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settings. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
+#endif
+
+int __init s3c64xx_pm_init(void)
+{
+	int i;
+
+	s3c_pm_init();
+
+	for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
+		pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
+			      &pm_domain_always_on_gov, false);
+
+	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
+		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
+
+#ifdef CONFIG_S3C_DEV_FB
+	if (dev_get_platdata(&s3c_device_fb.dev))
+		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
+
+	return 0;
+}
+
+static __init int s3c64xx_pm_initcall(void)
+{
+	if (!soc_is_s3c64xx())
+		return 0;
+
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
+	gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
+	gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
+	gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
+	gpio_direction_output(S3C64XX_GPN(12), 0);
+	gpio_direction_output(S3C64XX_GPN(13), 0);
+	gpio_direction_output(S3C64XX_GPN(14), 0);
+	gpio_direction_output(S3C64XX_GPN(15), 0);
+#endif
+
+	return 0;
+}
+arch_initcall(s3c64xx_pm_initcall);
diff --git a/arch/arm/mach-s3c/pm.c b/arch/arm/mach-s3c/pm.c
new file mode 100644
index 000000000..06f019690
--- /dev/null
+++ b/arch/arm/mach-s3c/pm.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2004-2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// S3C common power management (suspend to ram) support.
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/suspend.h>
+
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-irq.h"
+#include "irqs.h"
+
+#include <asm/irq.h>
+
+#include "cpu.h"
+#include "pm.h"
+#include "pm-core.h"
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int s3c_irqext_wake(struct irq_data *data, unsigned int state)
+{
+	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", data->irq);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+void (*pm_cpu_prep)(void);
+int (*pm_cpu_sleep)(unsigned long);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+	int ret;
+	/* ensure the debug is initialised (if enabled) */
+	s3c_pm_debug_init_uart();
+
+	S3C_PMDBG("%s(%d)\n", __func__, state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!of_have_populated_dt() &&
+	    !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	/* save all necessary core registers not covered by the drivers */
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_save_gpios();
+		samsung_pm_saved_gpios();
+	}
+
+	s3c_pm_save_uarts(soc_is_s3c2410());
+	s3c_pm_save_core();
+
+	/* set the irq configuration for wake */
+
+	s3c_pm_configure_extint();
+
+	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	s3c_pm_arch_prepare_irqs();
+
+	/* call cpu specific preparation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	s3c_pm_arch_stop_clocks();
+
+	/* this will also act as our return point from when
+	 * we resume as it saves its own register state and restores it
+	 * during the resume.  */
+
+	ret = cpu_suspend(0, pm_cpu_sleep);
+	if (ret)
+		return ret;
+
+	/* restore the system state */
+
+	s3c_pm_restore_core();
+	s3c_pm_restore_uarts(soc_is_s3c2410());
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_restore_gpios();
+		s3c_pm_restored_gpios();
+	}
+
+	s3c_pm_debug_init_uart();
+
+	/* check what irq (if any) restored the system */
+
+	s3c_pm_arch_show_resume_irqs();
+
+	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
+	s3c_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	S3C_PMDBG("S3C PM Resume (post-restore)\n");
+	return 0;
+}
+
+static int s3c_pm_prepare(void)
+{
+	/* prepare check area if configured */
+
+	s3c_pm_check_prepare();
+	return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops s3c_pm_ops = {
+	.enter		= s3c_pm_enter,
+	.prepare	= s3c_pm_prepare,
+	.finish		= s3c_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+	suspend_set_ops(&s3c_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-s3c/pm.h b/arch/arm/mach-s3c/pm.h
new file mode 100644
index 000000000..eed61e585
--- /dev/null
+++ b/arch/arm/mach-s3c/pm.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+/* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#include "pm-common.h"
+
+struct device;
+
+#ifdef CONFIG_SAMSUNG_PM
+
+extern __init int s3c_pm_init(void);
+extern __init int s3c64xx_pm_init(void);
+
+#else
+
+static inline int s3c_pm_init(void)
+{
+	return 0;
+}
+
+static inline int s3c64xx_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern int (*pm_cpu_sleep)(unsigned long);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int s3c2410_cpu_suspend(unsigned long);
+
+#ifdef CONFIG_PM_SLEEP
+extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
+#else
+#define s3c_irq_wake NULL
+#define s3c_cpu_resume NULL
+#endif
+
+#ifdef CONFIG_SAMSUNG_PM
+extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+#else
+#define s3c_irqext_wake NULL
+#endif
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+#ifdef CONFIG_GPIO_SAMSUNG
+/**
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void samsung_pm_restore_gpios(void);
+
+/**
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
+ */
+extern void samsung_pm_save_gpios(void);
+#else
+static inline void samsung_pm_restore_gpios(void) {}
+static inline void samsung_pm_save_gpios(void) {}
+#endif
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/mach-s3c/pwm-core.h b/arch/arm/mach-s3c/pwm-core.h
new file mode 100644
index 000000000..05e344864
--- /dev/null
+++ b/arch/arm/mach-s3c/pwm-core.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung PWM controller platform data helpers.
+ */
+
+#ifndef __ASM_ARCH_PWM_CORE_H
+#define __ASM_ARCH_PWM_CORE_H __FILE__
+
+#include <clocksource/samsung_pwm.h>
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd);
+#else
+static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { }
+#endif
+
+#endif /* __ASM_ARCH_PWM_CORE_H */
diff --git a/arch/arm/mach-s3c/regs-adc.h b/arch/arm/mach-s3c/regs-adc.h
new file mode 100644
index 000000000..58953c738
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-adc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * S3C2410 ADC registers
+ */
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
+#define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
+#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
+
+
+/* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL		(1<<16)
+#define S3C2410_ADCCON_ECFLG		(1<<15)
+#define S3C2410_ADCCON_PRSCEN		(1<<14)
+#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2416_ADCCON_RESSEL		(1 << 3)
+#define S3C2410_ADCCON_STDBM		(1<<2)
+#define S3C2410_ADCCON_READ_START	(1<<1)
+#define S3C2410_ADCCON_ENABLE_START	(1<<0)
+#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
+#define S3C2410_ADCTSC_YM_SEN		(1<<7)
+#define S3C2410_ADCTSC_YP_SEN		(1<<6)
+#define S3C2410_ADCTSC_XM_SEN		(1<<5)
+#define S3C2410_ADCTSC_XP_SEN		(1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
+#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
diff --git a/arch/arm/mach-s3c/regs-clock-s3c24xx.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
new file mode 100644
index 000000000..933ddb5ee
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 clock register definitions
+ */
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK
+
+#include "map.h"
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE	     (1<<2)
+#define S3C2410_CLKCON_POWER	     (1<<3)
+#define S3C2410_CLKCON_NAND	     (1<<4)
+#define S3C2410_CLKCON_LCDC	     (1<<5)
+#define S3C2410_CLKCON_USBH	     (1<<6)
+#define S3C2410_CLKCON_USBD	     (1<<7)
+#define S3C2410_CLKCON_PWMT	     (1<<8)
+#define S3C2410_CLKCON_SDI	     (1<<9)
+#define S3C2410_CLKCON_UART0	     (1<<10)
+#define S3C2410_CLKCON_UART1	     (1<<11)
+#define S3C2410_CLKCON_UART2	     (1<<12)
+#define S3C2410_CLKCON_GPIO	     (1<<13)
+#define S3C2410_CLKCON_RTC	     (1<<14)
+#define S3C2410_CLKCON_ADC	     (1<<15)
+#define S3C2410_CLKCON_IIC	     (1<<16)
+#define S3C2410_CLKCON_IIS	     (1<<17)
+#define S3C2410_CLKCON_SPI	     (1<<18)
+
+#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
+#define S3C2410_CLKSLOW_SLOW		(1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA        (1<<19)
+#define S3C2440_CLKCON_AC97          (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
+#define S3C2440_CLKDIVN_UCLK         (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
+#define S3C2440_CAMDIVN_DVSEN        (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412)
+
+#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF		(1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN		(1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
+#define S3C2412_CLKDIVN_DVSEN		(1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
+#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
+
+#define S3C2412_CLKCON_WDT		(1<<28)
+#define S3C2412_CLKCON_SPI		(1<<27)
+#define S3C2412_CLKCON_IIS		(1<<26)
+#define S3C2412_CLKCON_IIC		(1<<25)
+#define S3C2412_CLKCON_ADC		(1<<24)
+#define S3C2412_CLKCON_RTC		(1<<23)
+#define S3C2412_CLKCON_GPIO		(1<<22)
+#define S3C2412_CLKCON_UART2		(1<<21)
+#define S3C2412_CLKCON_UART1		(1<<20)
+#define S3C2412_CLKCON_UART0		(1<<19)
+#define S3C2412_CLKCON_SDI		(1<<18)
+#define S3C2412_CLKCON_PWMT		(1<<17)
+#define S3C2412_CLKCON_USBD		(1<<16)
+#define S3C2412_CLKCON_CAMCLK		(1<<15)
+#define S3C2412_CLKCON_UARTCLK		(1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48	(1<<12)
+#define S3C2412_CLKCON_USB_DEV48	(1<<11)
+#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
+#define S3C2412_CLKCON_HCLKx2		(1<<9)
+#define S3C2412_CLKCON_SDRAM		(1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3		(1<<3)
+#define S3C2412_CLKCON_DMA2		(1<<2)
+#define S3C2412_CLKCON_DMA1		(1<<1)
+#define S3C2412_CLKCON_DMA0		(1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c/regs-clock-s3c64xx.h b/arch/arm/mach-s3c/regs-clock-s3c64xx.h
new file mode 100644
index 000000000..35a68767b
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-clock-s3c64xx.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ */
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+/*
+ * FIXME: Remove remaining definitions
+ */
+
+#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
+#define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
+
+/* PCLK GATE Registers */
+#define S3C_CLKCON_PCLK_UART3		(1<<4)
+#define S3C_CLKCON_PCLK_UART2		(1<<3)
+#define S3C_CLKCON_PCLK_UART1		(1<<2)
+#define S3C_CLKCON_PCLK_UART0		(1<<1)
+
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF		0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
new file mode 100644
index 000000000..7df31f203
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-clock.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-clock-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-clock-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
new file mode 100644
index 000000000..8b8b572ae
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2440/S3C2412 Signal Drive Strength Control
+ */
+
+
+#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H
+#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__
+
+/* S3C2412 */
+#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
+
+/* S3C2440 */
+#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
+
+#endif	/* __ASM_ARCH_REGS_DSC_S3C24XX_H */
+
diff --git a/arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h b/arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h
new file mode 100644
index 000000000..589afe113
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO memory port register definitions
+ */
+
+#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+
+#define S3C64XX_MEM0CONSTOP	S3C64XX_GPIOREG(0x1B0)
+#define S3C64XX_MEM1CONSTOP	S3C64XX_GPIOREG(0x1B4)
+
+#define S3C64XX_MEM0CONSLP0	S3C64XX_GPIOREG(0x1C0)
+#define S3C64XX_MEM0CONSLP1	S3C64XX_GPIOREG(0x1C4)
+#define S3C64XX_MEM1CONSLP	S3C64XX_GPIOREG(0x1C8)
+
+#define S3C64XX_MEM0DRVCON	S3C64XX_GPIOREG(0x1D0)
+#define S3C64XX_MEM1DRVCON	S3C64XX_GPIOREG(0x1D4)
+
+#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
+
diff --git a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
new file mode 100644
index 000000000..9a7e26226
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
@@ -0,0 +1,608 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2410 GPIO register definitions
+ */
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H
+
+#include "map-s3c.h"
+
+#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0_ADDR0   (1<<0)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2410_GPA18_ALE    (1<<18)
+#define S3C2410_GPA19_nFWE   (1<<19)
+#define S3C2410_GPA20_nFRE   (1<<20)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
+
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
+
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
+
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
+
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
+
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
+
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
+
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
+
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
+
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+#define S3C2410_GPD14_nSS1	(0x03 << 28)
+
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+#define S3C2410_GPD15_nSS0	(0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
+
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
+
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
+
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
+
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
+
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port G
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
+
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
+
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
+
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPHCON has 2 bits for each of the input pins on port H
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+#define S3C2416_GPH0_TXD0  (0x02 << 0)
+
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+#define S3C2416_GPH1_RXD0  (0x02 << 2)
+
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+#define S3C2416_GPH2_TXD1   (0x02 << 4)
+
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+#define S3C2416_GPH3_RXD1   (0x02 << 6)
+
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+#define S3C2416_GPH4_TXD2   (0x02 << 8)
+
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+#define S3C2416_GPH5_RXD2   (0x02 << 10)
+
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2416_GPH6_TXD3   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+#define S3C2416_GPH6_nRTS2  (0x03 << 12)
+
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2416_GPH7_RXD3   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+#define S3C2416_GPH7_nCTS2  (0x03 << 14)
+
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+#define S3C2416_GPH8_nCTS0  (0x02 << 16)
+
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+#define S3C2416_GPH9_nRTS0    (0x02 << 18)
+
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1   (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1   (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/*
+ * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
+ * for each of the pins on port J.
+ *   00 - input, 01 output, 10 - camera
+ *
+ * Pull up works like all other ports.
+ */
+
+#define S3C2413_GPJCON	   S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT	   S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP	   S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON  S3C2410_GPIOREG(0x8C)
+
+/* S3C2443 and above */
+#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
+#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
+#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
+
+#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
+#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
+#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
+
+#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
+#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
+#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
+
+#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
+#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
+#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
+
+/* miscellaneous control */
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+#define S3C2416_MISCCR_FLT_I2C      (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
+/* interrupt filtering control for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2416	   (0x32416003)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450	   (0x32450003)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW	(0x0)
+#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c/regs-gpio-s3c64xx.h b/arch/arm/mach-s3c/regs-gpio-s3c64xx.h
new file mode 100644
index 000000000..592a2be3d
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-gpio-s3c64xx.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPIOREG(reg)	(S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE	S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE	S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE	S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE	S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE	S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE	S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE	S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE	S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE	S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE	S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE	S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE	S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE	S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE	S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE	S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
+
+/* SPCON */
+
+#define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
+
+#define S3C64XX_SPCON_DRVCON_CAM_MASK		(0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT		(30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA		(0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA		(0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA		(0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA		(0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK		(0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT	(28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA		(0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA		(0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA		(0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA		(0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK		(0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT	(26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA		(0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA		(0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA		(0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA		(0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK		(0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT		(24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA		(0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA		(0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA		(0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA		(0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK		(0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT	(22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA		(0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA		(0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA		(0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA		(0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN		(1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK	(0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT	(18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA	(0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA	(0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA	(0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA	(0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK		(0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT	(16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED	(0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN		(0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP		(0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK		(0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT		(14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED	(0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN		(0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP		(0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK		(0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT		(12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED	(0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN		(0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP		(0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK		(0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT		(8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED	(0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN		(0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP		(0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD			(1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD			(1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2		(1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1		(1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND		(1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK		(0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT		(0)
+#define S3C64XX_SPCON_LCD_SEL_HOST		(0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB		(0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656		(0x2 << 0)
+
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON	S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON	S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON	S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON	S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON	S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON	S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON	S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON	S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON	S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK	S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK	S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK	S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK	S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK	S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND	S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND	S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND	S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND	S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND	S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY	S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x)	(1 << (x))
+
+#define S3C64XX_SERVICE		S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND	S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
+
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP	S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN	(1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT	(1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK	(0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0	(0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1	(0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ	(0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK	(0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0	(0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1	(0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP	(0x2 << 0)
+
+
+#define S3C64XX_SLPEN		S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP		(1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN	(1 << 1)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
new file mode 100644
index 000000000..0d41cb76d
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-gpio.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-gpio-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-gpio-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/regs-irq-s3c24xx.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
new file mode 100644
index 000000000..c0b97b203
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ */
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+#include "map-s3c.h"
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c/regs-irq-s3c64xx.h b/arch/arm/mach-s3c/regs-irq-s3c64xx.h
new file mode 100644
index 000000000..b18c7bcb6
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-irq-s3c64xx.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ */
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
new file mode 100644
index 000000000..57f0dda8d
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-irq.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-irq-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-irq-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c/regs-irqtype.h b/arch/arm/mach-s3c/regs-irqtype.h
new file mode 100644
index 000000000..ec5c4c5fd
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-irqtype.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - IRQ detection types.
+ */
+
+/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
+ * the S3C64XX
+*/
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
diff --git a/arch/arm/mach-s3c/regs-mem-s3c24xx.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
new file mode 100644
index 000000000..8fed34a16
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2410 Memory Control register definitions
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
+#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+
+#include "map-s3c.h"
+
+#define S3C2410_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x00)
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x04)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x08)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x0C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x10)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x14)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x18)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x1C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x20)
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x24)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x28)
+
+#define S3C2410_BWSCON_ST1		(1 << 7)
+#define S3C2410_BWSCON_ST2		(1 << 11)
+#define S3C2410_BWSCON_ST3		(1 << 15)
+#define S3C2410_BWSCON_ST4		(1 << 19)
+#define S3C2410_BWSCON_ST5		(1 << 23)
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_WS		(1 << 2)
+
+#define S3C2410_BANKCON_PMC16		(0x3)
+
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+#define S3C2410_REFRESH_SELF		(1 << 22)
+
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c/regs-modem-s3c64xx.h b/arch/arm/mach-s3c/regs-modem-s3c64xx.h
new file mode 100644
index 000000000..136ad4429
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-modem-s3c64xx.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - modem block registers
+ */
+
+#ifndef __MACH_S3C64XX_REGS_MODEM_H
+#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
+
+#define S3C64XX_MODEMREG(x)			(S3C64XX_VA_MODEM + (x))
+
+#define S3C64XX_MODEM_INT2AP			S3C64XX_MODEMREG(0x0)
+#define S3C64XX_MODEM_INT2MODEM			S3C64XX_MODEMREG(0x4)
+#define S3C64XX_MODEM_MIFCON			S3C64XX_MODEMREG(0x8)
+#define S3C64XX_MODEM_MIFPCON			S3C64XX_MODEMREG(0xC)
+#define S3C64XX_MODEM_INTCLR			S3C64XX_MODEMREG(0x10)
+#define S3C64XX_MODEM_DMA_TXADDR		S3C64XX_MODEMREG(0x14)
+#define S3C64XX_MODEM_DMA_RXADDR		S3C64XX_MODEMREG(0x18)
+
+#define MIFPCON_INT2M_LEVEL			(1 << 4)
+#define MIFPCON_LCD_BYPASS			(1 << 3)
+
+#endif /* __MACH_S3C64XX_REGS_MODEM_H */
diff --git a/arch/arm/mach-s3c/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
new file mode 100644
index 000000000..b3b670d46
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-s3c2443-clock.h
@@ -0,0 +1,238 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C2443 clock register definitions
+ */
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#include <linux/delay.h>
+#include "map-s3c.h"
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+#define S3C2443_PHYCTRL			S3C2443_CLKREG(0x80)
+#define S3C2443_PHYPWR			S3C2443_CLKREG(0x84)
+#define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
+#define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
+
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_LCDC		(1<<9)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2416_HCLKCON_HSMMC0		(1<<15)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_AC97		(1<<8)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#define S3C2443_PWRCFG_SLEEP		(1<<15)
+
+#define S3C2443_PWRCFG_USBPHY		(1 << 4)
+
+#define S3C2443_URSTCON_FUNCRST		(1 << 2)
+#define S3C2443_URSTCON_PHYRST		(1 << 0)
+
+#define S3C2443_PHYCTRL_CLKSEL		(1 << 3)
+#define S3C2443_PHYCTRL_EXTCLK		(1 << 2)
+#define S3C2443_PHYCTRL_PLLSEL		(1 << 1)
+#define S3C2443_PHYCTRL_DSPORT		(1 << 0)
+
+#define S3C2443_PHYPWR_COMMON_ON	(1 << 31)
+#define S3C2443_PHYPWR_ANALOG_PD	(1 << 4)
+#define S3C2443_PHYPWR_PLL_REFCLK	(1 << 3)
+#define S3C2443_PHYPWR_XO_ON		(1 << 2)
+#define S3C2443_PHYPWR_PLL_PWRDN	(1 << 1)
+#define S3C2443_PHYPWR_FSUSPEND		(1 << 0)
+
+#define S3C2443_UCLKCON_DETECT_VBUS	(1 << 31)
+#define S3C2443_UCLKCON_FUNC_CLKEN	(1 << 2)
+#define S3C2443_UCLKCON_TCLKEN		(1 << 0)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline void s3c_hsudc_init_phy(void)
+{
+	u32 cfg;
+
+	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+	writel(cfg, S3C2443_PWRCFG);
+
+	cfg = readl(S3C2443_URSTCON);
+	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+	writel(cfg, S3C2443_URSTCON);
+	mdelay(1);
+
+	cfg = readl(S3C2443_URSTCON);
+	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+	writel(cfg, S3C2443_URSTCON);
+
+	cfg = readl(S3C2443_PHYCTRL);
+	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+	writel(cfg, S3C2443_PHYCTRL);
+
+	cfg = readl(S3C2443_PHYPWR);
+	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+		S3C2443_PHYPWR_ANALOG_PD);
+	cfg |= S3C2443_PHYPWR_COMMON_ON;
+	writel(cfg, S3C2443_PHYPWR);
+
+	cfg = readl(S3C2443_UCLKCON);
+	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+		S3C2443_UCLKCON_TCLKEN);
+	writel(cfg, S3C2443_UCLKCON);
+}
+
+static inline void s3c_hsudc_uninit_phy(void)
+{
+	u32 cfg;
+
+	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+	writel(cfg, S3C2443_PWRCFG);
+
+	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+	writel(cfg, S3C2443_UCLKCON);
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/arch/arm/mach-s3c/regs-srom-s3c64xx.h b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
new file mode 100644
index 000000000..2b37988bd
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ */
+
+#ifndef __MACH_S3C64XX_REGS_SROM_H
+#define __MACH_S3C64XX_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
+#define S3C64XX_SROM_BW__CS_MASK		0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT	0
+#define S3C64XX_SROM_BW__NCS1__SHIFT	4
+#define S3C64XX_SROM_BW__NCS2__SHIFT	8
+#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT	0
+#define S3C64XX_SROM_BCX__PMC__MASK	3
+#define S3C64XX_SROM_BCX__TACP__SHIFT	4
+#define S3C64XX_SROM_BCX__TACP__MASK	0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
+#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
+#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT	16
+#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
+#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT	28
+#define S3C64XX_SROM_BCX__TACS__MASK	0xf
+
+#endif /* __MACH_S3C64XX_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c/regs-sys-s3c64xx.h b/arch/arm/mach-s3c/regs-sys-s3c64xx.h
new file mode 100644
index 000000000..3687325e2
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-sys-s3c64xx.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x)			(S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0		S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1		S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2		S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL		S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS			S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK		(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h b/arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h
new file mode 100644
index 000000000..a35811cc6
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - syscon power and sleep control registers
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
+#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+
+#define S3C64XX_PWR_CFG				S3C_SYSREG(0x804)
+
+#define S3C64XX_PWRCFG_OSC_OTG_DISABLE		(1 << 17)
+#define S3C64XX_PWRCFG_MMC2_DISABLE		(1 << 16)
+#define S3C64XX_PWRCFG_MMC1_DISABLE		(1 << 15)
+#define S3C64XX_PWRCFG_MMC0_DISABLE		(1 << 14)
+#define S3C64XX_PWRCFG_HSI_DISABLE		(1 << 13)
+#define S3C64XX_PWRCFG_TS_DISABLE		(1 << 12)
+#define S3C64XX_PWRCFG_RTC_TICK_DISABLE		(1 << 11)
+#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE	(1 << 10)
+#define S3C64XX_PWRCFG_MSM_DISABLE		(1 << 9)
+#define S3C64XX_PWRCFG_KEY_DISABLE		(1 << 8)
+#define S3C64XX_PWRCFG_BATF_DISABLE		(1 << 7)
+
+#define S3C64XX_PWRCFG_CFG_WFI_MASK		(0x3 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SHIFT		(5)
+#define S3C64XX_PWRCFG_CFG_WFI_IGNORE		(0x0 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_IDLE		(0x1 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_STOP		(0x2 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SLEEP		(0x3 << 5)
+
+#define S3C64XX_PWRCFG_CFG_BATFLT_MASK		(0x3 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT		(3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE	(0x0 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ		(0x1 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP		(0x3 << 3)
+
+#define S3C64XX_PWRCFG_CFG_BAT_WAKE		(1 << 2)
+#define S3C64XX_PWRCFG_OSC27_EN			(1 << 0)
+
+#define S3C64XX_EINT_MASK			S3C_SYSREG(0x808)
+
+#define S3C64XX_NORMAL_CFG			S3C_SYSREG(0x810)
+
+#define S3C64XX_NORMALCFG_IROM_ON		(1 << 30)
+#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON		(1 << 16)
+#define S3C64XX_NORMALCFG_DOMAIN_S_ON		(1 << 15)
+#define S3C64XX_NORMALCFG_DOMAIN_F_ON		(1 << 14)
+#define S3C64XX_NORMALCFG_DOMAIN_P_ON		(1 << 13)
+#define S3C64XX_NORMALCFG_DOMAIN_I_ON		(1 << 12)
+#define S3C64XX_NORMALCFG_DOMAIN_G_ON		(1 << 10)
+#define S3C64XX_NORMALCFG_DOMAIN_V_ON		(1 << 9)
+
+#define S3C64XX_STOP_CFG			S3C_SYSREG(0x814)
+
+#define S3C64XX_STOPCFG_MEMORY_ARM_ON		(1 << 29)
+#define S3C64XX_STOPCFG_TOP_MEMORY_ON		(1 << 20)
+#define S3C64XX_STOPCFG_ARM_LOGIC_ON		(1 << 17)
+#define S3C64XX_STOPCFG_TOP_LOGIC_ON		(1 << 8)
+#define S3C64XX_STOPCFG_OSC_EN			(1 << 0)
+
+#define S3C64XX_SLEEP_CFG			S3C_SYSREG(0x818)
+
+#define S3C64XX_SLEEPCFG_OSC_EN			(1 << 0)
+
+#define S3C64XX_STOP_MEM_CFG			S3C_SYSREG(0x81c)
+
+#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN	(1 << 6)
+#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN	(1 << 5)
+#define S3C64XX_STOPMEMCFG_OTG_RETAIN		(1 << 4)
+#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN		(1 << 3)
+#define S3C64XX_STOPMEMCFG_IROM_RETAIN		(1 << 2)
+#define S3C64XX_STOPMEMCFG_IRDA_RETAIN		(1 << 1)
+#define S3C64XX_STOPMEMCFG_NFCON_RETAIN		(1 << 0)
+
+#define S3C64XX_OSC_STABLE			S3C_SYSREG(0x824)
+#define S3C64XX_PWR_STABLE			S3C_SYSREG(0x828)
+
+#define S3C64XX_WAKEUP_STAT			S3C_SYSREG(0x908)
+
+#define S3C64XX_WAKEUPSTAT_MMC2			(1 << 11)
+#define S3C64XX_WAKEUPSTAT_MMC1			(1 << 10)
+#define S3C64XX_WAKEUPSTAT_MMC0			(1 << 9)
+#define S3C64XX_WAKEUPSTAT_HSI			(1 << 8)
+#define S3C64XX_WAKEUPSTAT_BATFLT		(1 << 6)
+#define S3C64XX_WAKEUPSTAT_MSM			(1 << 5)
+#define S3C64XX_WAKEUPSTAT_KEY			(1 << 4)
+#define S3C64XX_WAKEUPSTAT_TS			(1 << 3)
+#define S3C64XX_WAKEUPSTAT_RTC_TICK		(1 << 2)
+#define S3C64XX_WAKEUPSTAT_RTC_ALARM		(1 << 1)
+#define S3C64XX_WAKEUPSTAT_EINT			(1 << 0)
+
+#define S3C64XX_BLK_PWR_STAT			S3C_SYSREG(0x90c)
+
+#define S3C64XX_BLKPWRSTAT_G			(1 << 7)
+#define S3C64XX_BLKPWRSTAT_ETM			(1 << 6)
+#define S3C64XX_BLKPWRSTAT_S			(1 << 5)
+#define S3C64XX_BLKPWRSTAT_F			(1 << 4)
+#define S3C64XX_BLKPWRSTAT_P			(1 << 3)
+#define S3C64XX_BLKPWRSTAT_I			(1 << 2)
+#define S3C64XX_BLKPWRSTAT_V			(1 << 1)
+#define S3C64XX_BLKPWRSTAT_TOP			(1 << 0)
+
+#define S3C64XX_INFORM0				S3C_SYSREG(0xA00)
+#define S3C64XX_INFORM1				S3C_SYSREG(0xA04)
+#define S3C64XX_INFORM2				S3C_SYSREG(0xA08)
+#define S3C64XX_INFORM3				S3C_SYSREG(0xA0C)
+
+#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h b/arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h
new file mode 100644
index 000000000..deb1dd2d9
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+*/
+
+/* Note, this is a separate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
+#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
+
+#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11			(1 << 6)
+#define S3C_PHYCLK_EXT_OSC			(1 << 5)
+#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
+#define S3C_PHYCLK_ID_PULL			(1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
+#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK			(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 1)
+#define S3C_RSTCON_PHY				(1 << 0)
+
+#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/mach-s3c/rtc-core-s3c24xx.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
new file mode 100644
index 000000000..e7258b242
--- /dev/null
+++ b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ */
+
+#ifndef __RTC_CORE_S3C24XX_H
+#define __RTC_CORE_S3C24XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+extern struct platform_device s3c_device_rtc;
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+	s3c_device_rtc.name = name;
+}
+
+#endif /* __RTC_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
new file mode 100644
index 000000000..4d39d9939
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2410.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2005 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+#include "gpio-samsung.h"
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+
+#include "regs-clock.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+
+#include "s3c24xx.h"
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2410_iodesc[] __initdata __maybe_unused = {
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(WATCHDOG),
+};
+
+/* our uart devices */
+
+/* uart registration process */
+
+void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2410_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2410_map_io(void)
+{
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+
+	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
+}
+
+struct bus_type s3c2410_subsys = {
+	.name = "s3c2410-core",
+	.dev_name = "s3c2410-core",
+};
+
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two subsystems with the same name.
+ */
+struct bus_type s3c2410a_subsys = {
+	.name = "s3c2410a-core",
+	.dev_name = "s3c2410a-core",
+};
+
+static struct device s3c2410_dev = {
+	.bus		= &s3c2410_subsys,
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2410 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2410_core_init(void)
+{
+	return subsys_system_register(&s3c2410_subsys, NULL);
+}
+
+core_initcall(s3c2410_core_init);
+
+static int __init s3c2410a_core_init(void)
+{
+	return subsys_system_register(&s3c2410a_subsys, NULL);
+}
+
+core_initcall(s3c2410a_core_init);
+
+int __init s3c2410_init(void)
+{
+	printk("S3C2410: Initialising architecture\n");
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
+
+	return device_register(&s3c2410_dev);
+}
+
+int __init s3c2410a_init(void)
+{
+	s3c2410_dev.bus = &s3c2410a_subsys;
+	return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
new file mode 100644
index 000000000..0031cfaa1
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2412-power.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
+
+#define S3C24XX_PWRREG(x)			((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON			S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG				S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0				S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1				S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2				S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3				S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ			(1 << 0)
+#define S3C2412_PWRCFG_BATF_IGNORE		(2 << 0)
+#define S3C2412_PWRCFG_BATF_SLEEP		(3 << 0)
+#define S3C2412_PWRCFG_BATF_MASK		(3 << 0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3 << 6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ		(1 << 8)
+#define S3C2412_PWRCFG_NAND_NORST		(1 << 9)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
new file mode 100644
index 000000000..0b1ca78c9
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2412.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
+#include "s3c2412-power.h"
+
+#ifndef CONFIG_CPU_S3C2412_ONLY
+void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
+#endif
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2412_iodesc[] __initdata __maybe_unused = {
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(WATCHDOG),
+	{
+		.virtual = (unsigned long)S3C2412_VA_SSMC,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)S3C2412_VA_EBI,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+};
+
+/* uart registration process */
+
+void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
+
+	/* rename devices that are s3c2412/s3c2413 specific */
+	s3c_device_sdi.name  = "s3c2412-sdi";
+	s3c_device_lcd.name  = "s3c2412-lcd";
+	s3c_nand_setname("s3c2412-nand");
+
+	/* alter IRQ of SDI controller */
+
+	s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
+	s3c_device_sdi.resource[1].end   = IRQ_S3C2412_SDI;
+
+	/* spi channel related changes, s3c2412/13 specific */
+	s3c_device_spi0.name = "s3c2412-spi";
+	s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
+	s3c_device_spi1.name = "s3c2412-spi";
+	s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
+	s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
+
+}
+
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+	unsigned long tmp;
+
+	/* ensure our idle mode is to go to idle */
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	cpu_do_idle();
+}
+
+/* s3c2412_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2412_map_io(void)
+{
+	/* move base of IO */
+
+	s3c2412_init_gpio2();
+
+	/* set our idle function */
+
+	arm_pm_idle = s3c2412_idle;
+
+	/* register our io-tables */
+
+	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2412 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+struct bus_type s3c2412_subsys = {
+	.name = "s3c2412-core",
+	.dev_name = "s3c2412-core",
+};
+
+static int __init s3c2412_core_init(void)
+{
+	return subsys_system_register(&s3c2412_subsys, NULL);
+}
+
+core_initcall(s3c2412_core_init);
+
+static struct device s3c2412_dev = {
+	.bus		= &s3c2412_subsys,
+};
+
+int __init s3c2412_init(void)
+{
+	printk("S3C2412: Initialising architecture\n");
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&s3c2412_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
+
+	return device_register(&s3c2412_dev);
+}
diff --git a/arch/arm/mach-s3c/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
new file mode 100644
index 000000000..ed09a0e13
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2412.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
+
+#include "map-s3c.h"
+
+#define S3C2412_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x)		(S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x)		(S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o)		(S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
new file mode 100644
index 000000000..126e6ed29
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2416.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+//	as part of OpenInkpot project
+// Copyright (c) 2009 Promwad Innovation Company
+//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+//
+// Samsung S3C2416 Mobile CPU support
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+#include "gpio-samsung.h"
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
+
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "sdhci.h"
+#include "pm.h"
+
+#include "iic-core.h"
+#include "adc-core.h"
+
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
+
+static struct map_desc s3c2416_iodesc[] __initdata __maybe_unused = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct bus_type s3c2416_subsys = {
+	.name = "s3c2416-core",
+	.dev_name = "s3c2416-core",
+};
+
+static struct device s3c2416_dev = {
+	.bus		= &s3c2416_subsys,
+};
+
+int __init s3c2416_init(void)
+{
+	printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+	/* change WDT IRQ number */
+	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_fb_setname("s3c2443-fb");
+
+	s3c_adc_setname("s3c2416-adc");
+	s3c_rtc_setname("s3c2416-rtc");
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&s3c2416_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+	register_syscore_ops(&s3c2416_irq_syscore_ops);
+#endif
+
+	return device_register(&s3c2416_dev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+	s3c_nand_setname("s3c2412-nand");
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
+
+	/* initialize device information early */
+	s3c2416_default_sdhci0();
+	s3c2416_default_sdhci1();
+	s3c24xx_spi_setname("s3c2443-spi");
+
+	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+	return subsys_system_register(&s3c2416_subsys, NULL);
+}
+
+core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
new file mode 100644
index 000000000..c6cdee498
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2440.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2004-2006 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// Samsung S3C2440 Mobile CPU support
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
+
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
+
+#include "s3c24xx.h"
+
+static struct device s3c2440_dev = {
+	.bus		= &s3c2440_subsys,
+};
+
+int __init s3c2440_init(void)
+{
+	printk("S3C2440: Initialising architecture\n");
+
+	/* change irq for watchdog */
+
+	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
+
+	/* register suspend/resume handlers */
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+	register_syscore_ops(&s3c244x_pm_syscore_ops);
+#endif
+
+	/* register our system device for everything else */
+
+	return device_register(&s3c2440_dev);
+}
+
+void __init s3c2440_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+}
diff --git a/arch/arm/mach-s3c/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
new file mode 100644
index 000000000..0c0e30b66
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2442.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2442 core and lock support
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <linux/atomic.h>
+#include <asm/irq.h>
+
+#include "regs-clock.h"
+
+#include "cpu.h"
+#include "pm.h"
+
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
+
+#include "s3c24xx.h"
+
+static struct device s3c2442_dev = {
+	.bus		= &s3c2442_subsys,
+};
+
+int __init s3c2442_init(void)
+{
+	printk("S3C2442: Initialising architecture\n");
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+	register_syscore_ops(&s3c244x_pm_syscore_ops);
+#endif
+
+	return device_register(&s3c2442_dev);
+}
+
+void __init s3c2442_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
+}
diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
new file mode 100644
index 000000000..05c3c298b
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c2443.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2007 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// Samsung S3C2443 Mobile CPU support
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+#include "gpio-samsung.h"
+#include "irqs.h"
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
+
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "adc-core.h"
+
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
+
+static struct map_desc s3c2443_iodesc[] __initdata __maybe_unused = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct bus_type s3c2443_subsys = {
+	.name = "s3c2443-core",
+	.dev_name = "s3c2443-core",
+};
+
+static struct device s3c2443_dev = {
+	.bus		= &s3c2443_subsys,
+};
+
+int __init s3c2443_init(void)
+{
+	printk("S3C2443: Initialising architecture\n");
+
+	s3c_nand_setname("s3c2412-nand");
+	s3c_fb_setname("s3c2443-fb");
+
+	s3c_adc_setname("s3c2443-adc");
+	s3c_rtc_setname("s3c2443-rtc");
+
+	/* change WDT IRQ number */
+	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
+
+	return device_register(&s3c2443_dev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(void)
+{
+	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
+
+	/* initialize device information early */
+	s3c24xx_spi_setname("s3c2443-spi");
+
+	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+	return subsys_system_register(&s3c2443_subsys, NULL);
+}
+
+core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mach-s3c/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
new file mode 100644
index 000000000..95df3491e
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c244x.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2004-2006 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+#include <asm/irq.h>
+
+#include "regs-clock.h"
+#include "regs-gpio.h"
+
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
+
+static struct map_desc s3c244x_iodesc[] __initdata __maybe_unused = {
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(WATCHDOG),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(void)
+{
+	/* register our io-tables */
+
+	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+
+	/* rename any peripherals used differing from the s3c2410 */
+
+	s3c_device_sdi.name  = "s3c2440-sdi";
+	s3c_device_i2c0.name  = "s3c2440-i2c";
+	s3c_nand_setname("s3c2440-nand");
+	s3c_device_ts.name = "s3c2440-ts";
+	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+	s3c2410_device_dclk.name = "s3c2440-dclk";
+}
+
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
+
+struct bus_type s3c2440_subsys = {
+	.name		= "s3c2440-core",
+	.dev_name	= "s3c2440-core",
+};
+
+struct bus_type s3c2442_subsys = {
+	.name		= "s3c2442-core",
+	.dev_name	= "s3c2442-core",
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+	return subsys_system_register(&s3c2440_subsys, NULL);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+	return subsys_system_register(&s3c2442_subsys, NULL);
+}
+
+core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save s3c244x_sleep[] = {
+	SAVE_ITEM(S3C2440_DSC0),
+	SAVE_ITEM(S3C2440_DSC1),
+	SAVE_ITEM(S3C2440_GPJDAT),
+	SAVE_ITEM(S3C2440_GPJCON),
+	SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	return 0;
+}
+
+static void s3c244x_resume(void)
+{
+	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+	.suspend	= s3c244x_suspend,
+	.resume		= s3c244x_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c
new file mode 100644
index 000000000..819a95364
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c24xx.c
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+//	http://www.simtec.co.uk/products/SWLINUX/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Common code for S3C24XX machines
+
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <clocksource/samsung_pwm.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_data/clk-s3c2410.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+#include <linux/dmaengine.h>
+#include <linux/clk/samsung.h>
+
+#include "hardware-s3c24xx.h"
+#include "map.h"
+#include "regs-clock.h"
+#include <asm/irq.h>
+#include <asm/cacheflush.h>
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "regs-gpio.h"
+#include "dma-s3c24xx.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pwm-core.h"
+
+#include "s3c24xx.h"
+
+/* table of supported CPUs */
+
+static const char name_s3c2410[]  = "S3C2410";
+static const char name_s3c2412[]  = "S3C2412";
+static const char name_s3c2416[]  = "S3C2416/S3C2450";
+static const char name_s3c2440[]  = "S3C2440";
+static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2442b[]  = "S3C2442B";
+static const char name_s3c2443[]  = "S3C2443";
+static const char name_s3c2410a[] = "S3C2410A";
+static const char name_s3c2440a[] = "S3C2440A";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x32410000,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2410_map_io,
+		.init_uarts	= s3c2410_init_uarts,
+		.init		= s3c2410_init,
+		.name		= name_s3c2410
+	},
+	{
+		.idcode		= 0x32410002,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2410_map_io,
+		.init_uarts	= s3c2410_init_uarts,
+		.init		= s3c2410a_init,
+		.name		= name_s3c2410a
+	},
+	{
+		.idcode		= 0x32440000,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2440_map_io,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2440_init,
+		.name		= name_s3c2440
+	},
+	{
+		.idcode		= 0x32440001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2440_map_io,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2440_init,
+		.name		= name_s3c2440a
+	},
+	{
+		.idcode		= 0x32440aaa,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2442_map_io,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2442_init,
+		.name		= name_s3c2442
+	},
+	{
+		.idcode		= 0x32440aab,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2442_map_io,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2442_init,
+		.name		= name_s3c2442b
+	},
+	{
+		.idcode		= 0x32412001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2412_map_io,
+		.init_uarts	= s3c2412_init_uarts,
+		.init		= s3c2412_init,
+		.name		= name_s3c2412,
+	},
+	{			/* a newer version of the s3c2412 */
+		.idcode		= 0x32412003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2412_map_io,
+		.init_uarts	= s3c2412_init_uarts,
+		.init		= s3c2412_init,
+		.name		= name_s3c2412,
+	},
+	{			/* a strange version of the s3c2416 */
+		.idcode		= 0x32450003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2416_map_io,
+		.init_uarts	= s3c2416_init_uarts,
+		.init		= s3c2416_init,
+		.name		= name_s3c2416,
+	},
+	{
+		.idcode		= 0x32443001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2443_map_io,
+		.init_uarts	= s3c2443_init_uarts,
+		.init		= s3c2443_init,
+		.name		= name_s3c2443,
+	},
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s3c_iodesc[] __initdata __maybe_unused = {
+	IODESC_ENT(GPIO),
+	IODESC_ENT(IRQ),
+	IODESC_ENT(MEMCTRL),
+	IODESC_ENT(UART)
+};
+
+/* read cpu identification code */
+
+static unsigned long s3c24xx_read_idcode_v5(void)
+{
+#if defined(CONFIG_CPU_S3C2416)
+	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+	/* test for s3c2416 or similar device */
+	if ((gs >> 16) == 0x3245)
+		return gs;
+#endif
+
+#if defined(CONFIG_CPU_S3C2412)
+	return __raw_readl(S3C2412_GSTATUS1);
+#else
+	return 1UL;	/* don't look like an 2400 */
+#endif
+}
+
+static unsigned long s3c24xx_read_idcode_v4(void)
+{
+	return __raw_readl(S3C2410_GSTATUS1);
+}
+
+static void s3c24xx_default_idle(void)
+{
+	unsigned long tmp = 0;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++)
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= (1 << 4),
+};
+
+void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
+{
+	arm_pm_idle = s3c24xx_default_idle;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(mach_desc, size);
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+
+	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
+		samsung_cpu_id = s3c24xx_read_idcode_v5();
+	} else {
+		samsung_cpu_id = s3c24xx_read_idcode_v4();
+	}
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
+}
+
+void __init s3c24xx_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init s3c24xx_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c24xx_pwm_variant);
+}
+
+/* Serial port registrations */
+
+#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
+
+static struct resource s3c2410_uart0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
+			IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
+			IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
+			IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
+			IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c2410_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c2410_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c2410_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c2410_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
+	},
+};
+
+#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
+static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static const struct dma_slave_map s3c2410_dma_slave_map[] = {
+	{ "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
+	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
+	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
+	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
+	/*
+	 * The DMA request source[1] (DMACH_UARTx_SRC2) are
+	 * not used in the UART driver.
+	 */
+	{ "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
+static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2410_dma_channels,
+	.num_channels = DMACH_MAX,
+	.slave_map = s3c2410_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
+};
+
+struct platform_device s3c2410_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2410_dma_platdata,
+	},
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static const struct dma_slave_map s3c2412_dma_slave_map[] = {
+	{ "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
+	{ "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
+	{ "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
+	{ "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
+	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
+	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2412_dma_channels,
+	.num_channels = DMACH_MAX,
+	.slave_map = s3c2412_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
+};
+
+struct platform_device s3c2412_device_dma = {
+	.name		= "s3c2412-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2412_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(6, 1) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
+						   S3C24XX_DMA_CHANREQ(0, 2),
+	},
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
+						  S3C24XX_DMA_CHANREQ(5, 2),
+	},
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
+						  S3C24XX_DMA_CHANREQ(6, 3),
+	},
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
+						  S3C24XX_DMA_CHANREQ(5, 3),
+	},
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static const struct dma_slave_map s3c2440_dma_slave_map[] = {
+	/* TODO: DMACH_XD0 */
+	/* TODO: DMACH_XD1 */
+	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
+	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
+	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
+	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
+	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+	/* TODO: DMACH_TIMER */
+	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+	{ "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
+	{ "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
+	{ "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
+	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
+static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2440_dma_channels,
+	.num_channels = DMACH_MAX,
+	.slave_map = s3c2440_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
+};
+
+struct platform_device s3c2440_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2440_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static const struct dma_slave_map s3c2443_dma_slave_map[] = {
+	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
+	{ "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
+	{ "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
+	{ "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
+	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+	.num_phy_channels = 6,
+	.channels = s3c2443_dma_channels,
+	.num_channels = DMACH_MAX,
+	.slave_map = s3c2443_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
+};
+
+struct platform_device s3c2443_device_dma = {
+	.name		= "s3c2443-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
+	.resource	= s3c2443_dma_resource,
+	.dev	= {
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2443_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+	defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
+	.modify_misccr = s3c2410_modify_misccr,
+};
+
+struct platform_device s3c2410_device_dclk = {
+	.name		= "s3c2410-dclk",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
+	.resource	= s3c2410_dclk_resource,
+	.dev		= {
+		.platform_data = &s3c_clk_platform_data,
+	},
+};
+#endif
+
+#ifndef CONFIG_COMPILE_TEST
+#pragma message "The platform is deprecated and scheduled for removal. " \
+		"Please reach to the maintainers of the platform " \
+		"and linux-samsung-soc@vger.kernel.org if you still use it." \
+		"Without such feedback, the platform will be removed after 2022."
+#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h
new file mode 100644
index 000000000..34dd4ac50
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c24xx.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S3C24XX SoCs
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
+
+#include <linux/reboot.h>
+#include "irqs.h"
+
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_init_irq(void);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern  int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern  int s3c2412_baseclk_add(void);
+extern void s3c2412_init_irq(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern  int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern  int s3c2416_baseclk_add(void);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+#else
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
+extern void s3c2440_init_irq(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
+extern void s3c2442_init_irq(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern  int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern  int s3c2443_baseclk_add(void);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
+
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
+extern struct platform_device s3c2410_device_dma;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2440_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
+extern struct platform_device s3c2410_device_dclk;
+
+enum s3c24xx_timer_mode {
+	S3C24XX_PWM0,
+	S3C24XX_PWM1,
+	S3C24XX_PWM2,
+	S3C24XX_PWM3,
+	S3C24XX_PWM4,
+};
+
+extern void __init s3c24xx_set_timer_source(enum s3c24xx_timer_mode event,
+					    enum s3c24xx_timer_mode source);
+extern void __init s3c24xx_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
new file mode 100644
index 000000000..802f4fb74
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c6400.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2009 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+
+#include "regs-clock.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "iic-core.h"
+
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
+
+	s3c_onenand_setname("s3c6400-onenand");
+	s3c64xx_onenand1_setname("s3c6400-onenand");
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+static struct bus_type s3c6400_subsys = {
+	.name		= "s3c6400-core",
+	.dev_name	= "s3c6400-core",
+};
+
+static struct device s3c6400_dev = {
+	.bus	= &s3c6400_subsys,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt() || soc_is_s3c64xx())
+		return 0;
+
+	return subsys_system_register(&s3c6400_subsys, NULL);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return device_register(&s3c6400_dev);
+}
diff --git a/arch/arm/mach-s3c/s3c6410.c b/arch/arm/mach-s3c/s3c6410.c
new file mode 100644
index 000000000..dae17d5fd
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c6410.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+
+#include <linux/soc/samsung/s3c-pm.h>
+#include "regs-clock.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "adc-core.h"
+#include "iic-core.h"
+
+#include "ata-core-s3c64xx.h"
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
+
+void __init s3c6410_map_io(void)
+{
+	/* initialise device information early */
+	s3c6410_default_sdhci0();
+	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_adc_setname("s3c64xx-adc");
+	s3c_device_nand.name = "s3c6400-nand";
+	s3c_onenand_setname("s3c6410-onenand");
+	s3c64xx_onenand1_setname("s3c6410-onenand");
+	s3c_cfcon_setname("s3c64xx-pata");
+}
+
+void __init s3c6410_init_irq(void)
+{
+	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct bus_type s3c6410_subsys = {
+	.name		= "s3c6410-core",
+	.dev_name	= "s3c6410-core",
+};
+
+static struct device s3c6410_dev = {
+	.bus	= &s3c6410_subsys,
+};
+
+static int __init s3c6410_core_init(void)
+{
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
+		return 0;
+
+	return subsys_system_register(&s3c6410_subsys, NULL);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+	printk("S3C6410: Initialising architecture\n");
+
+	return device_register(&s3c6410_dev);
+}
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
new file mode 100644
index 000000000..dce2b0e95
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Common Codes for S3C64XX machines
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/clk/samsung.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include "map.h"
+#include "irqs.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
+#include "pwm-core.h"
+#include "regs-irqtype.h"
+#include "s3c64xx.h"
+#include "irq-uart-s3c64xx.h"
+
+/* External clock frequency */
+static unsigned long xtal_f __ro_after_init = 12000000;
+static unsigned long xusbxti_f __ro_after_init = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+	xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+	xusbxti_f = freq;
+}
+
+/* uart registration process */
+
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6400_map_io,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6400_init,
+		.name		= name_s3c6400,
+	}, {
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6410_map_io,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/*
+ * note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct bus_type s3c64xx_subsys = {
+	.name		= "s3c64xx-core",
+	.dev_name	= "s3c64xx-core",
+};
+
+static struct device s3c64xx_dev = {
+	.bus	= &s3c64xx_subsys,
+};
+
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
+{
+	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init s3c64xx_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c64xx_pwm_variant);
+}
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+
+	/* detect cpu id */
+	s3c64xx_init_cpu();
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
+}
+
+static __init int s3c64xx_dev_init(void)
+{
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
+		return 0;
+
+	subsys_system_register(&s3c64xx_subsys, NULL);
+	return device_register(&s3c64xx_dev);
+}
+core_initcall(s3c64xx_dev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+}
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
+
+static inline void s3c_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= (u32)data->chip_data;
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask &= ~((u32)data->chip_data);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(struct irq_data *data)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(data);
+	s3c_irq_eint_ack(data);
+}
+
+static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = eint_offset(data->irq);
+	int pin, pin_val;
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	/* set the GPIO pin appropriately */
+
+	if (offs < 16) {
+		pin = S3C64XX_GPN(offs);
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
+		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
+
+	s3c_gpio_cfgpin(pin, pin_val);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.irq_mask	= s3c_irq_eint_mask,
+	.irq_unmask	= s3c_irq_eint_unmask,
+	.irq_mask_ack	= s3c_irq_eint_maskack,
+	.irq_ack	= s3c_irq_eint_ack,
+	.irq_set_type	= s3c_irq_eint_set_type,
+	.irq_set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
+		return -ENODEV;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
+		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
+		irq_clear_status_flags(irq, IRQ_NOREQUEST);
+	}
+
+	irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+arch_initcall(s3c64xx_init_irq_eint);
+
+#ifndef CONFIG_COMPILE_TEST
+#pragma message "The platform is deprecated and scheduled for removal. " \
+		"Please reach to the maintainers of the platform " \
+		"and linux-samsung-soc@vger.kernel.org if you still use it." \
+		"Without such feedback, the platform will be removed after 2024."
+#endif
diff --git a/arch/arm/mach-s3c/s3c64xx.h b/arch/arm/mach-s3c/s3c64xx.h
new file mode 100644
index 000000000..92258e4f6
--- /dev/null
+++ b/arch/arm/mach-s3c/s3c64xx.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+#include <linux/reboot.h>
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+struct device_node;
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+
+#else
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+
+#else
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
+/* Samsung HR-Timer Clock mode */
+enum s3c64xx_timer_mode {
+	S3C64XX_PWM0,
+	S3C64XX_PWM1,
+	S3C64XX_PWM2,
+	S3C64XX_PWM3,
+	S3C64XX_PWM4,
+};
+
+extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+					    enum s3c64xx_timer_mode source);
+extern void __init s3c64xx_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c/sdhci.h b/arch/arm/mach-s3c/sdhci.h
new file mode 100644
index 000000000..9f9d419e5
--- /dev/null
+++ b/arch/arm/mach-s3c/sdhci.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ */
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include "devs.h"
+
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+				    struct s3c_sdhci_platdata *set);
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
+
+/* Helper function availability */
+
+extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+
+/* S3C2416 SDHCI setup */
+
+#ifdef CONFIG_S3C2416_SETUP_SDHCI
+static inline void s3c2416_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s3c2416_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+#else
+static inline void s3c2416_default_sdhci0(void) { }
+static inline void s3c2416_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C2416_SETUP_SDHCI */
+
+/* S3C64XX SDHCI setup */
+
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+static inline void s3c6400_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s3c6400_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s3c6400_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
+
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	default:
+		break;
+	}
+}
+#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
new file mode 100644
index 000000000..cfa34b55c
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX setup information for 24bpp LCD framebuffer
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include "fb.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
new file mode 100644
index 000000000..0d88366b2
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX Base setup for i2c device
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device;
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
+}
diff --git a/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c b/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
new file mode 100644
index 000000000..a6ef8d2bc
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX I2C bus 0 gpio configuration
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c b/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
new file mode 100644
index 000000000..0fe37363d
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX I2C bus 1 gpio configuration
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c/setup-ide-s3c64xx.c b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
new file mode 100644
index 000000000..f11f2b02e
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// S3C64XX setup information for IDE
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <linux/platform_data/ata-samsung_cf.h>
+
+#include "map.h"
+#include "regs-clock.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+void s3c64xx_ide_setup_gpio(void)
+{
+	u32 reg;
+
+	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+	/* Independent CF interface, CF chip select configuration */
+	writel(reg | MEM_SYS_CFG_INDEP_CF |
+		MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
+	s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
+
+	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+	s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
+
+	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+	s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
+}
diff --git a/arch/arm/mach-s3c/setup-keypad-s3c64xx.c b/arch/arm/mach-s3c/setup-keypad-s3c64xx.c
new file mode 100644
index 000000000..8463ad37c
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-keypad-s3c64xx.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// GPIO configuration for S3C64XX KeyPad device
+
+#include <linux/gpio.h>
+#include "gpio-cfg.h"
+#include "keypad.h"
+#include "gpio-samsung.h"
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
+
+	/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
new file mode 100644
index 000000000..02131b3a7
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Promwad Innovation Company
+//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+//
+// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+//
+// Based on mach-s3c64xx/setup-sdhci-gpio.c
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+#include "sdhci.h"
+
+void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
+}
+
+void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
new file mode 100644
index 000000000..646ff949a
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include "gpio-cfg.h"
+#include "sdhci.h"
+#include "gpio-samsung.h"
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+	/* Set all the necessary GPG pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+	}
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+	/* Set all the necessary GPH pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+	}
+}
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	/* Set all the necessary GPH pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
+
+	/* Set all the necessary GPC pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s3c/setup-spi-s3c24xx.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
new file mode 100644
index 000000000..93fa1bbc9
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// HS-SPI device setup for S3C2443/S3C2416
+//
+// Copyright (C) 2011 Samsung Electronics Ltd.
+//		http://www.samsung.com/
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include "gpio-cfg.h"
+
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+int s3c64xx_spi0_cfg_gpio(void)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-s3c/setup-spi-s3c64xx.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
new file mode 100644
index 000000000..497aff71c
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2011 Samsung Electronics Ltd.
+//		http://www.samsung.com/
+
+#include <linux/gpio.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+int s3c64xx_spi0_cfg_gpio(void)
+{
+	s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-s3c/setup-ts-s3c24xx.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
new file mode 100644
index 000000000..57363eaeb
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+//                     http://www.samsung.com/
+//
+// Based on S3C24XX setup for i2c device
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
+/**
+ * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ * @dev: Device to configure GPIO for (ignored)
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+ */
+void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c b/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
new file mode 100644
index 000000000..500d105af
--- /dev/null
+++ b/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2011 Samsung Electronics Co.Ltd
+// Author: Joonyoung Shim <jy0922.shim@samsung.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include "map.h"
+#include "cpu.h"
+#include "usb-phy.h"
+
+#include "regs-sys-s3c64xx.h"
+#include "regs-usb-hsotg-phy-s3c64xx.h"
+
+enum samsung_usb_phy_type {
+	USB_PHY_TYPE_DEVICE,
+	USB_PHY_TYPE_HOST,
+};
+
+static int s3c_usb_otgphy_init(struct platform_device *pdev)
+{
+	struct clk *xusbxti;
+	u32 phyclk;
+
+	writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+	/* set clock frequency for PLL */
+	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+	xusbxti = clk_get(&pdev->dev, "xusbxti");
+	if (!IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
+	/* TODO: select external clock/oscillator */
+	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+	/* set to normal OTG PHY */
+	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+	mdelay(1);
+
+	/* reset OTG PHY and Link */
+	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+			S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+
+	return 0;
+}
+
+static int s3c_usb_otgphy_exit(struct platform_device *pdev)
+{
+	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+	writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+	return 0;
+}
+
+int s3c_usb_phy_init(struct platform_device *pdev, int type)
+{
+	if (type == USB_PHY_TYPE_DEVICE)
+		return s3c_usb_otgphy_init(pdev);
+
+	return -EINVAL;
+}
+
+int s3c_usb_phy_exit(struct platform_device *pdev, int type)
+{
+	if (type == USB_PHY_TYPE_DEVICE)
+		return s3c_usb_otgphy_exit(pdev);
+
+	return -EINVAL;
+}
diff --git a/arch/arm/mach-s3c/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
new file mode 100644
index 000000000..487485bcc
--- /dev/null
+++ b/arch/arm/mach-s3c/simtec-audio.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Audio setup for various Simtec S3C24XX implementations
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include "devs.h"
+
+#include "bast.h"
+#include "simtec.h"
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+	unsigned int tmp;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tmp = __raw_readb(BAST_VA_CTRL1);
+	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+	tmp |= BAST_CPLD_CTRL1_LRCDAC;
+	__raw_writeb(tmp, BAST_VA_CTRL1);
+
+	local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+	.name	= our_name,
+	.id	= -1,
+	.dev	= {
+		.parent		= &s3c_device_iis.dev,
+		.platform_data	= &simtec_audio_platdata,
+	},
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *spd)
+{
+	if (!name)
+		name = "tlv320aic23";
+
+	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+	/* copy platform data so the source can be __initdata */
+	if (spd)
+		simtec_audio_platdata = *spd;
+
+	if (has_lr_routing)
+		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	platform_device_register(&s3c_device_iis);
+	platform_device_register(&simtec_audio_dev);
+	return 0;
+}
diff --git a/arch/arm/mach-s3c/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
new file mode 100644
index 000000000..a6fba056a
--- /dev/null
+++ b/arch/arm/mach-s3c/simtec-nor.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// Simtec NOR mapping
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "map.h"
+
+#include "bast.h"
+#include "simtec.h"
+
+static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
+{
+	unsigned int val;
+
+	val = __raw_readb(BAST_VA_CTRL3);
+
+	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
+
+	if (vpp)
+		val |= BAST_CPLD_CTRL3_ROMWEN;
+	else
+		val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+	__raw_writeb(val, BAST_VA_CTRL3);
+}
+
+static struct physmap_flash_data simtec_nor_pdata = {
+	.width		= 2,
+	.set_vpp	= simtec_nor_vpp,
+	.nr_parts	= 0,
+};
+
+static struct resource simtec_nor_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
+};
+
+static struct platform_device simtec_device_nor = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(simtec_nor_resource),
+	.resource	= simtec_nor_resource,
+	.dev		= {
+		.platform_data = &simtec_nor_pdata,
+	},
+};
+
+void __init nor_simtec_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&simtec_device_nor);
+	if (ret < 0)
+		printk(KERN_ERR "failed to register physmap-flash device\n");
+	else
+		simtec_nor_vpp(NULL, 1);
+}
diff --git a/arch/arm/mach-s3c/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
new file mode 100644
index 000000000..490256a76
--- /dev/null
+++ b/arch/arm/mach-s3c/simtec-pm.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2004 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/
+//
+// Power Management helpers for Simtec S3C24XX implementations
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "map.h"
+#include "regs-gpio.h"
+
+#include <asm/mach-types.h>
+
+#include "pm.h"
+
+#include "regs-mem-s3c24xx.h"
+
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
+
+/* pm_simtec_init
+ *
+ * enable the power management functions
+*/
+
+static __init int pm_simtec_init(void)
+{
+	unsigned long gstatus4;
+
+	/* check which machine we are running on */
+
+	if (!machine_is_bast() && !machine_is_vr1000() &&
+	    !machine_is_anubis() && !machine_is_osiris() &&
+	    !machine_is_aml_m5900())
+		return 0;
+
+	printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
+
+	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+	__raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+	return s3c_pm_init();
+}
+
+arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
new file mode 100644
index 000000000..76cedb5c7
--- /dev/null
+++ b/arch/arm/mach-s3c/simtec-usb.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2004-2005 Simtec Electronics
+//   Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+//
+// Simtec BAST and Thorcom VR1000 USB port support functions
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/gpio.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "gpio-samsung.h"
+#include "irqs.h"
+#include <asm/irq.h>
+
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include "devs.h"
+
+#include "bast.h"
+#include "simtec.h"
+
+/* control power and monitor over-current events on various Simtec
+ * designed boards.
+*/
+
+static unsigned int power_state[2];
+
+static void
+usb_simtec_powercontrol(int port, int to)
+{
+	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
+
+	power_state[port] = to;
+
+	if (power_state[0] && power_state[1])
+		gpio_set_value(S3C2410_GPB(4), 0);
+	else
+		gpio_set_value(S3C2410_GPB(4), 1);
+}
+
+static irqreturn_t
+usb_simtec_ocirq(int irq, void *pw)
+{
+	struct s3c2410_hcd_info *info = pw;
+
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
+		pr_debug("usb_simtec: over-current irq (oc detected)\n");
+		s3c2410_usb_report_oc(info, 3);
+	} else {
+		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
+		s3c2410_usb_report_oc(info, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+	int ret;
+
+	if (on) {
+		ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "USB Over-current", info);
+		if (ret != 0) {
+			printk(KERN_ERR "failed to request usb oc irq\n");
+		}
+	} else {
+		free_irq(BAST_IRQ_USBOC, info);
+	}
+}
+
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+	.port[1]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+
+	.power_control	= usb_simtec_powercontrol,
+	.enable_oc	= usb_simtec_enableoc,
+};
+
+
+int __init usb_simtec_init(void)
+{
+	int ret;
+
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
+
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_ohci_set_platdata(&usb_simtec_info);
+	return 0;
+}
diff --git a/arch/arm/mach-s3c/simtec.h b/arch/arm/mach-s3c/simtec.h
new file mode 100644
index 000000000..d96bd6087
--- /dev/null
+++ b/arch/arm/mach-s3c/simtec.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec common functions
+ */
+
+struct s3c24xx_audio_simtec_pdata;
+
+extern void nor_simtec_init(void);
+
+extern int usb_simtec_init(void);
+
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/mach-s3c/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
new file mode 100644
index 000000000..04aded987
--- /dev/null
+++ b/arch/arm/mach-s3c/sleep-s3c2410.S
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ */
+
+#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
+#include <asm/assembler.h>
+#include "map.h"
+
+#include "regs-gpio.h"
+#include "regs-clock.h"
+
+#include "regs-mem-s3c24xx.h"
+
+	/* s3c2410_cpu_suspend
+	 *
+	 * put the cpu into sleep mode
+	*/
+
+ENTRY(s3c2410_cpu_suspend)
+	@@ prepare cpu to sleep
+
+	ldr	r4, =S3C2410_REFRESH
+	ldr	r5, =S3C24XX_MISCCR
+	ldr	r6, =S3C2410_CLKCON
+	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
+
+	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
+	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
+
+	teq	pc, #0			@ first as a trial-run to load cache
+	bl	s3c2410_do_sleep
+	teq	r0, r0			@ now do it for real
+	b	s3c2410_do_sleep	@
+
+	@@ align next bit of code to cache line
+	.align	5
+s3c2410_do_sleep:
+	streq	r7, [r4]			@ SDRAM sleep command
+	streq	r8, [r5]			@ SDRAM power-down config
+	streq	r9, [r6]			@ CPU sleep
+1:	beq	1b
+	ret	lr
diff --git a/arch/arm/mach-s3c/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
new file mode 100644
index 000000000..b4b61737f
--- /dev/null
+++ b/arch/arm/mach-s3c/sleep-s3c2412.S
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "map.h"
+
+#include "regs-irq.h"
+
+	.text
+
+	.global	s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+	mov	r0, #0			/* argument for coprocessors */
+	ldr	r1, =S3C2410_INTPND
+	ldr	r2, =S3C2410_SRCPND
+	ldr	r3, =S3C2410_EINTPEND
+
+	teq	r0, r0
+	bl	s3c2412_sleep_enter1
+	teq	pc, r0
+	bl	s3c2412_sleep_enter1
+
+	.align	5
+
+	/* this is called twice, first with the Z flag to ensure that the
+	 * instructions have been loaded into the cache, and the second
+	 * time to try and suspend the system.
+	*/
+s3c2412_sleep_enter1:
+	mcr	p15, 0, r0, c7, c10, 4
+	mcrne	p15, 0, r0, c7, c0, 4
+
+	/* if we return from here, it is because an interrupt was
+	 * active when we tried to shutdown. Try and ack the IRQ and
+	 * retry, as simply returning causes the system to lock.
+	*/
+
+	ldrne	r9, [r1]
+	strne	r9, [r1]
+	ldrne	r9, [r2]
+	strne	r9, [r2]
+	ldrne	r9, [r3]
+	strne	r9, [r3]
+	bne	s3c2412_sleep_enter1
+
+	ret	lr
diff --git a/arch/arm/mach-s3c/sleep-s3c24xx.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
new file mode 100644
index 000000000..4b2af91f3
--- /dev/null
+++ b/arch/arm/mach-s3c/sleep-s3c24xx.S
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ */
+
+#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
+#include <asm/assembler.h>
+#include "map.h"
+
+#include "regs-gpio.h"
+#include "regs-clock.h"
+
+/*
+ * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+ */
+//#define S3C24XX_DEBUG_RESUME
+
+	.text
+
+	/* sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	*/
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	*/
+
+ENTRY(s3c_cpu_resume)
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	msr	cpsr_c, r0
+
+	@@ load UART to allow us to print the two characters for
+	@@ resume debug
+
+	mov	r2, #S3C24XX_PA_UART & 0xff000000
+	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+	/* SMDK2440 LED set */
+	mov	r14, #S3C24XX_PA_GPIO
+	ldr	r12, [ r14, #0x54 ]
+	bic	r12, r12, #3<<4
+	orr	r12, r12, #1<<7
+	str	r12, [ r14, #0x54 ]
+#endif
+
+#ifdef S3C24XX_DEBUG_RESUME
+	mov	r3, #'L'
+	strb	r3, [ r2, #S3C2410_UTXH ]
+1001:
+	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
+	tst	r14, #S3C2410_UTRSTAT_TXE
+	beq	1001b
+#endif /* S3C24XX_DEBUG_RESUME */
+
+	b	cpu_resume
diff --git a/arch/arm/mach-s3c/sleep-s3c64xx.S b/arch/arm/mach-s3c/sleep-s3c64xx.S
new file mode 100644
index 000000000..739e53fbc
--- /dev/null
+++ b/arch/arm/mach-s3c/sleep-s3c64xx.S
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "map.h"
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include "regs-gpio.h"
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+
+#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
+
+#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+	b	cpu_resume
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
new file mode 100644
index 000000000..919c5fd0c
--- /dev/null
+++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H
+#define __PLAT_S3C_SPI_CORE_S3C24XX_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c24xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+	s3c64xx_device_spi0.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/usb-phy.h b/arch/arm/mach-s3c/usb-phy.h
new file mode 100644
index 000000000..759d66a07
--- /dev/null
+++ b/arch/arm/mach-s3c/usb-phy.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
+
+extern int s3c_usb_phy_init(struct platform_device *pdev, int type);
+extern int s3c_usb_phy_exit(struct platform_device *pdev, int type);
+
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */
diff --git a/arch/arm/mach-s3c/vr1000.h b/arch/arm/mach-s3c/vr1000.h
new file mode 100644
index 000000000..3cfa296be
--- /dev/null
+++ b/arch/arm/mach-s3c/vr1000.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN	(0x04)	/* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC		IRQ_EINT19
+#define VR1000_IRQ_IDE0			IRQ_EINT16
+#define VR1000_IRQ_IDE1			IRQ_EINT17
+#define VR1000_IRQ_SERIAL		IRQ_EINT12
+#define VR1000_IRQ_DM9000A		IRQ_EINT10
+#define VR1000_IRQ_DM9000N		IRQ_EINT9
+#define VR1000_IRQ_SMALERT		IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x)		(S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1			VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2			VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3			VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4			VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ		VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW		VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK		VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE	(0xE0000000)
+
+#define VR1000_VA_ISAIO		(VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	(VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	(VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	(VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	(VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	(VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	(VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	(VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	(VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	(0x02000000)
+#define VR1000_PA_IDEPRIAUX	(0x02800000)
+#define VR1000_PA_IDESEC	(0x03000000)
+#define VR1000_PA_IDESECAUX	(0x03800000)
+#define VR1000_PA_DM9000	(0x05000000)
+
+#define VR1000_PA_SERIAL	(0x11800000)
+#define VR1000_VA_SERIAL	(VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		(S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */
diff --git a/arch/arm/mach-s3c/wakeup-mask.c b/arch/arm/mach-s3c/wakeup-mask.c
new file mode 100644
index 000000000..b490e7527
--- /dev/null
+++ b/arch/arm/mach-s3c/wakeup-mask.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+//
+// Support for wakeup mask interrupts on newer SoCs
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include "wakeup-mask.h"
+#include "pm.h"
+
+void samsung_sync_wakemask(void __iomem *reg,
+			   const struct samsung_wakeup_mask *mask, int nr_mask)
+{
+	struct irq_data *data;
+	u32 val;
+
+	val = __raw_readl(reg);
+
+	for (; nr_mask > 0; nr_mask--, mask++) {
+		if (mask->irq == NO_WAKEUP_IRQ) {
+			val |= mask->bit;
+			continue;
+		}
+
+		data = irq_get_irq_data(mask->irq);
+
+		/* bit of a liberty to read this directly from irq_data. */
+		if (irqd_is_wakeup_set(data))
+			val &= ~mask->bit;
+		else
+			val |= mask->bit;
+	}
+
+	printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
+	__raw_writel(val, reg);
+}
diff --git a/arch/arm/mach-s3c/wakeup-mask.h b/arch/arm/mach-s3c/wakeup-mask.h
new file mode 100644
index 000000000..630909e66
--- /dev/null
+++ b/arch/arm/mach-s3c/wakeup-mask.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ */
+
+#ifndef __PLAT_WAKEUP_MASK_H
+#define __PLAT_WAKEUP_MASK_H __file__
+
+/* if no irq yet defined, but still want to mask */
+#define NO_WAKEUP_IRQ (0x90000000)
+
+/**
+ * struct samsung_wakeup_mask - wakeup mask information
+ * @irq: The interrupt associated with this wakeup.
+ * @bit: The bit, as a (1 << bitno) controlling this source.
+ */ 
+struct samsung_wakeup_mask {
+	unsigned int	irq;
+	u32		bit;
+};
+
+/**
+ * samsung_sync_wakemask - sync wakeup mask information for pm
+ * @reg: The register that is used.
+ * @masks: The list of masks to use.
+ * @nr_masks: The number of entries pointed to buy @masks.
+ *
+ * Synchronise the wakeup mask information at suspend time from the list
+ * of interrupts and control bits in @masks. We do this at suspend time
+ * as overriding the relevant irq chips is harder and the register is only
+ * required to be correct before we enter sleep.
+ */
+extern void samsung_sync_wakemask(void __iomem *reg,
+				  const struct samsung_wakeup_mask *masks,
+				  int nr_masks);
+
+#endif /* __PLAT_WAKEUP_MASK_H */