Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 907 insertions, 0 deletions

diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
new file mode 100644
index 000000000..0cc40b6b2
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -0,0 +1,907 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/linkage.h>
+
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+#include "irammap.h"
+#include "sleep.h"
+
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_TIMING_CONTROL		0x28
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_MRW				0xe8
+#define EMC_FBIO_CFG5			0x104
+#define EMC_AUTO_CAL_CONFIG		0x2a4
+#define EMC_AUTO_CAL_INTERVAL		0x2a8
+#define EMC_AUTO_CAL_STATUS		0x2ac
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_CFG_DIG_DLL			0x2bc
+#define EMC_EMC_STATUS			0x2b4
+#define EMC_ZCAL_INTERVAL		0x2e0
+#define EMC_ZQ_CAL			0x2ec
+#define EMC_XM2VTTGENPADCTRL		0x310
+#define EMC_XM2VTTGENPADCTRL2		0x314
+
+#define PMC_CTRL			0x0
+#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
+
+#define PMC_PLLP_WB0_OVERRIDE		0xf8
+#define PMC_IO_DPD_REQ			0x1b8
+#define PMC_IO_DPD_STATUS		0x1bc
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLC_MISC		0x8c
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLM_MISC		0x9c
+#define CLK_RESET_PLLP_BASE		0xa0
+#define CLK_RESET_PLLP_MISC		0xac
+#define CLK_RESET_PLLA_BASE		0xb0
+#define CLK_RESET_PLLA_MISC		0xbc
+#define CLK_RESET_PLLX_BASE		0xe0
+#define CLK_RESET_PLLX_MISC		0xe4
+#define CLK_RESET_PLLX_MISC3		0x518
+#define CLK_RESET_PLLX_MISC3_IDDQ	3
+#define CLK_RESET_PLLM_MISC_IDDQ	5
+#define CLK_RESET_PLLC_MISC_IDDQ	26
+#define CLK_RESET_PLLP_RESHIFT		0x528
+#define CLK_RESET_PLLP_RESHIFT_DEFAULT	0x3b
+#define CLK_RESET_PLLP_RESHIFT_ENABLE	0x3
+
+#define CLK_RESET_CLK_SOURCE_MSELECT	0x3b4
+
+#define MSELECT_CLKM			(0x3 << 30)
+
+#define LOCK_DELAY 50 /* safety delay after lock is detected */
+
+#define TEGRA30_POWER_HOTPLUG_SHUTDOWN	(1 << 27) /* Hotplug shutdown */
+
+#define PLLA_STORE_MASK			(1 << 0)
+#define PLLC_STORE_MASK			(1 << 1)
+#define PLLM_STORE_MASK			(1 << 2)
+#define PLLP_STORE_MASK			(1 << 3)
+#define PLLX_STORE_MASK			(1 << 4)
+#define PLLM_PMC_STORE_MASK		(1 << 5)
+
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #0x1
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
+.macro emc_timing_update, rd, base
+	mov	\rd, #1
+	str	\rd, [\base, #EMC_TIMING_CONTROL]
+1001:
+	ldr	\rd, [\base, #EMC_EMC_STATUS]
+	tst	\rd, #(0x1<<23)	@ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
+	bne	1001b
+.endm
+
+.macro test_pll_state, rd, test_mask
+	ldr	\rd, tegra_pll_state
+	tst	\rd, #\test_mask
+.endm
+
+.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #\pll_mask
+	orrne	\rd, \rd, #\pll_mask
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro store_pllm_pmc_state, rd, tmp, pmc_base
+	ldr	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+	tst	\rd, #(1 << 12)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #PLLM_PMC_STORE_MASK
+	orrne	\rd, \rd, #PLLM_PMC_STORE_MASK
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro pllm_pmc_enable, rd, pmc_base
+	test_pll_state \rd, PLLM_PMC_STORE_MASK
+
+	ldrne	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+	orrne	\rd, \rd, #(1 << 12)
+	strne	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc, test_mask
+	test_pll_state \rd, \test_mask
+	beq	1f
+
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+	/* Enable lock detector */
+	.if	\pll_misc
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	bic	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	orr	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	.endif
+1:
+.endm
+
+.macro pll_locked, rd, r_car_base, pll_base, test_mask
+	test_pll_state \rd, \test_mask
+	beq	2f
+1:
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 27)
+	beq	1b
+2:
+.endm
+
+.macro pll_iddq_exit, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	bic	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
+.macro pll_iddq_entry, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	orr	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra30_hotplug_shutdown(void)
+ *
+ * Powergates the current CPU.
+ * Should never return.
+ */
+ENTRY(tegra30_hotplug_shutdown)
+	/* Powergate this CPU */
+	mov	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+	bl	tegra30_cpu_shutdown
+	ret	lr			@ should never get here
+ENDPROC(tegra30_hotplug_shutdown)
+
+/*
+ * tegra30_cpu_shutdown(unsigned long flags)
+ *
+ * Puts the current CPU in wait-for-event mode on the flow controller
+ * and powergates it -- flags (in R0) indicate the request type.
+ *
+ * r10 = SoC ID
+ * corrupts r0-r4, r10-r12
+ */
+ENTRY(tegra30_cpu_shutdown)
+	cpu_id	r3
+	tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10
+	cmp	r10, #TEGRA30
+	bne	_no_cpu0_chk	@ It's not Tegra30
+
+	cmp	r3, #0
+	reteq	lr		@ Must never be called for CPU 0
+_no_cpu0_chk:
+
+	ldr	r12, =TEGRA_FLOW_CTRL_VIRT
+	cpu_to_csr_reg r1, r3
+	add	r1, r1, r12	@ virtual CSR address for this CPU
+	cpu_to_halt_reg r2, r3
+	add	r2, r2, r12	@ virtual HALT_EVENTS address for this CPU
+
+	/*
+	 * Clear this CPU's "event" and "interrupt" flags and power gate
+	 * it when halting but not before it is in the "WFE" state.
+	 */
+	movw	r12, \
+		FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
+		FLOW_CTRL_CSR_ENABLE
+	cmp	r10, #TEGRA30
+	moveq	r4, #(1 << 4)			@ wfe bitmap
+	movne	r4, #(1 << 8)			@ wfi bitmap
+ ARM(	orr	r12, r12, r4, lsl r3	)
+ THUMB(	lsl	r4, r4, r3		)
+ THUMB(	orr	r12, r12, r4		)
+	str	r12, [r1]
+
+	/* Halt this CPU. */
+	mov	r3, #0x400
+delay_1:
+	subs	r3, r3, #1			@ delay as a part of wfe war.
+	bge	delay_1;
+	cpsid	a				@ disable imprecise aborts.
+	ldr	r3, [r1]			@ read CSR
+	str	r3, [r1]			@ clear CSR
+
+	tst	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+	beq	flow_ctrl_setting_for_lp2
+
+	/* flow controller set up for hotplug */
+	mov	r3, #FLOW_CTRL_WAITEVENT		@ For hotplug
+	b	flow_ctrl_done
+flow_ctrl_setting_for_lp2:
+	/* flow controller set up for LP2 */
+	cmp	r10, #TEGRA30
+	moveq   r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT	@ For LP2
+	movne	r3, #FLOW_CTRL_WAITEVENT
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
+flow_ctrl_done:
+	cmp	r10, #TEGRA30
+	str	r3, [r2]
+	ldr	r0, [r2]
+	b	wfe_war
+
+__cpu_reset_again:
+	dsb
+	.align 5
+	wfeeq					@ CPU should be power gated here
+	wfine
+wfe_war:
+	b	__cpu_reset_again
+
+	/*
+	 * 38 nop's, which fills rest of wfe cache line and
+	 * 4 more cachelines with nop
+	 */
+	.rept 38
+	nop
+	.endr
+	b	.				@ should never get here
+
+ENDPROC(tegra30_cpu_shutdown)
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * tegra30_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
+ * tegra30_tear_down_core in IRAM
+ */
+ENTRY(tegra30_sleep_core_finish)
+	mov	r4, r0
+	/* Flush, disable the L1 data cache and exit SMP */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
+	bl	tegra_disable_clean_inv_dcache
+	mov	r0, r4
+
+	/*
+	 * Preload all the address literals that are needed for the
+	 * CPU power-gating process, to avoid loading from SDRAM which
+	 * are not supported once SDRAM is put into self-refresh.
+	 * LP0 / LP1 use physical address, since the MMU needs to be
+	 * disabled before putting SDRAM into self-refresh to avoid
+	 * memory access due to page table walks.
+	 */
+	mov32	r4, TEGRA_PMC_BASE
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+	mov32	r7, TEGRA_TMRUS_BASE
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra30_tear_down_core
+	mov32	r1, tegra30_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	ret	r3
+ENDPROC(tegra30_sleep_core_finish)
+
+/*
+ * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
+ *
+ * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
+ */
+ENTRY(tegra30_pm_secondary_cpu_suspend)
+	mov	r7, lr
+
+	/* Flush and disable the L1 data cache */
+	mov 	r0, #TEGRA_FLUSH_CACHE_LOUIS
+	bl	tegra_disable_clean_inv_dcache
+
+	/* Powergate this CPU. */
+	mov	r0, #0                          @ power mode flags (!hotplug)
+	bl	tegra30_cpu_shutdown
+	mov	r0, #1                          @ never return here
+	ret	r7
+ENDPROC(tegra30_pm_secondary_cpu_suspend)
+
+/*
+ * tegra30_tear_down_cpu
+ *
+ * Switches the CPU to enter sleep.
+ */
+ENTRY(tegra30_tear_down_cpu)
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+
+	b	tegra30_enter_sleep
+ENDPROC(tegra30_tear_down_cpu)
+
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra30_iram_start
+tegra30_iram_start:
+
+/*
+ * tegra30_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra30_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLP, PLLM, PLLC, PLLA and PLLX.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	beq	_no_pll_iddq_exit
+
+	pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r3
+
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	pllm_pmc_enable r1, r2
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0, PLLC_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0, PLLX_STORE_MASK
+
+	b	_pll_m_c_x_done
+
+_no_pll_iddq_exit:
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	pllm_pmc_enable r1, r2
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC, PLLC_STORE_MASK
+
+_pll_m_c_x_done:
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC, PLLP_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC, PLLA_STORE_MASK
+
+	pll_locked r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+
+	/*
+	 * CPUFreq driver could select other PLL for CPU. PLLX will be
+	 * enabled by the Tegra30 CLK driver on an as-needed basis, see
+	 * tegra30_cpu_clock_resume().
+	 */
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
+	beq	1f
+
+	pll_locked r1, r0, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+
+	ldr	r1, [r0, #CLK_RESET_PLLP_BASE]
+	bic	r1, r1, #(1<<31)	@ disable PllP bypass
+	str	r1, [r0, #CLK_RESET_PLLP_BASE]
+
+	mov	r1, #CLK_RESET_PLLP_RESHIFT_DEFAULT
+	str	r1, [r0, #CLK_RESET_PLLP_RESHIFT]
+1:
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #LOCK_DELAY
+	wait_until r1, r7, r3
+
+	adr	r5, tegra_sdram_pad_save
+
+	ldr	r4, [r5, #0x18]		@ restore CLK_SOURCE_MSELECT
+	str	r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	ldr	r4, [r5, #0x1C]		@ restore SCLK_BURST
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+
+	movw	r4, #:lower16:((1 << 28) | (0x4))	@ burst policy is PLLP
+	movt	r4, #:upper16:((1 << 28) | (0x4))
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	/* Restore pad power state to normal */
+	ldr	r1, [r5, #0x14]		@ PMC_IO_DPD_STATUS
+	mvn	r1, r1
+	bic	r1, r1, #(1 << 31)
+	orr	r1, r1, #(1 << 30)
+	str	r1, [r2, #PMC_IO_DPD_REQ]	@ DPD_OFF
+
+	cmp	r10, #TEGRA30
+	movweq	r0, #:lower16:TEGRA_EMC_BASE	@ r0 reserved for emc base
+	movteq	r0, #:upper16:TEGRA_EMC_BASE
+	cmp	r10, #TEGRA114
+	movweq	r0, #:lower16:TEGRA_EMC0_BASE
+	movteq	r0, #:upper16:TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	movweq	r0, #:lower16:TEGRA124_EMC_BASE
+	movteq	r0, #:upper16:TEGRA124_EMC_BASE
+
+exit_self_refresh:
+	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r5, #0x10]		@ restore EMC_XM2VTTGENPADCTRL2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	ldr	r1, [r5, #0x8]		@ restore EMC_AUTO_CAL_INTERVAL
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+
+	/* Relock DLL */
+	ldr	r1, [r0, #EMC_CFG_DIG_DLL]
+	orr	r1, r1, #(1 << 30)	@ set DLL_RESET
+	str	r1, [r0, #EMC_CFG_DIG_DLL]
+
+	emc_timing_update r1, r0
+
+	cmp	r10, #TEGRA114
+	movweq	r1, #:lower16:TEGRA_EMC1_BASE
+	movteq	r1, #:upper16:TEGRA_EMC1_BASE
+	cmpeq	r0, r1
+
+	ldr	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+	orr	r1, r1, #(1 << 31)	@ set AUTO_CAL_ACTIVE
+	orreq	r1, r1, #(1 << 27)	@ set slave mode for channel 1
+	str	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+
+emc_wait_auto_cal_onetime:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal_onetime
+
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP_PD
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	cmp	r10, #TEGRA30
+	streq	r1, [r0, #EMC_NOP]
+	streq	r1, [r0, #EMC_NOP]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	lsr	r1, r1, #8		@ devSel, bit0:dev0, bit1:dev1
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r2, [r0, #EMC_FBIO_CFG5]
+
+	and	r2, r2,	#3		@ check DRAM_TYPE
+	cmp	r2, #2
+	beq	emc_lpddr2
+
+	/* Issue a ZQ_CAL for dev0 - DDR3 */
+	mov32	r2, 0x80000011		@ DEV_SELECTION=2, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev1 - DDR3 */
+	mov32	r2, 0x40000011		@ DEV_SELECTION=1, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+	b	zcal_done
+
+emc_lpddr2:
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x800A00AB		@ DEV_SELECTION=2, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x400A00AB		@ DEV_SELECTION=1, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+zcal_done:
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+	ldr	r1, [r5, #0x4]		@ restore EMC_ZCAL_INTERVAL
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	ldr	r1, [r5, #0x0]		@ restore EMC_CFG
+	str	r1, [r0, #EMC_CFG]
+
+	emc_timing_update r1, r0
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	__no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	addne	r5, r5, #0x20
+	bne	exit_self_refresh
+__no_dual_emc_chanl:
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	ret	r0			@ jump to tegra_resume
+ENDPROC(tegra30_lp1_reset)
+
+	.align	L1_CACHE_SHIFT
+tegra30_sdram_pad_address:
+	.word	TEGRA_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra30_sdram_pad_address_end:
+
+tegra114_sdram_pad_address:
+	.word	TEGRA_EMC0_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA_EMC1_BASE + EMC_CFG				@0x20
+	.word	TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL			@0x24
+	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+tegra114_sdram_pad_adress_end:
+
+tegra124_sdram_pad_address:
+	.word	TEGRA124_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL		@0x8
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL		@0xc
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2		@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra124_sdram_pad_address_end:
+
+tegra30_sdram_pad_size:
+	.word	tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
+
+tegra114_sdram_pad_size:
+	.word	tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
+
+	.type	tegra_sdram_pad_save, %object
+tegra_sdram_pad_save:
+	.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+tegra_pll_state:
+	.word	0x0
+
+/*
+ * tegra30_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra30_tear_down_core:
+	bl	tegra30_sdram_self_refresh
+	bl	tegra30_switch_cpu_to_clk32k
+	b	tegra30_enter_sleep
+
+/*
+ * tegra30_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
+ * to the 32KHz clock.
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_switch_cpu_to_clk32k:
+	/*
+	 * start by jumping to CLKM to safely disable PLLs, then jump to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	/* 2uS delay delay between changing SCLK and CCLK */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* switch the clock source of mselect to be CLK_M */
+	ldr	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+	orr	r0, r0, #MSELECT_CLKM
+	str	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	/* store enable-state of PLLs */
+	store_pll_state r0, r1, r5, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+	store_pllm_pmc_state r0, r1, r4
+
+	/* disable PLLM via PMC in LP1 */
+	ldr	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+	bic	r0, r0, #(1 << 12)
+	str	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+
+	/* disable PLLP, PLLA, PLLC and PLLX */
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	orrne	r0, r0, #(1 << 31)	@ enable PllP bypass on fast cluster
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	beq	1f
+	mov	r0, #CLK_RESET_PLLP_RESHIFT_ENABLE
+	str	r0, [r5, #CLK_RESET_PLLP_RESHIFT]
+1:
+	ldr	r0, [r5, #CLK_RESET_PLLA_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLA_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLX_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLX_BASE]
+
+	cmp	r10, #TEGRA30
+	beq	_no_pll_in_iddq
+	pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+_no_pll_in_iddq:
+
+	/*
+	 * Switch to clk_s (32KHz); bits 28:31=0
+	 * Enable burst on CPU IRQ; bit 24=1
+	 * Set IRQ burst clock source to clk_m; bits 10:8=0
+	 */
+	mov	r0, #(1 << 24)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	ret	lr
+
+/*
+ * tegra30_enter_sleep
+ *
+ * uses flow controller to enter sleep state
+ * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
+ * executes from SDRAM with target state is LP2
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ */
+tegra30_enter_sleep:
+	cpu_id	r1
+
+	cpu_to_csr_reg	r2, r1
+	ldr	r0, [r6, r2]
+	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
+	str	r0, [r6, r2]
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	mov	r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
+	orreq	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	orrne   r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
+
+	cpu_to_halt_reg r2, r1
+	str	r0, [r6, r2]
+	dsb
+	ldr	r0, [r6, r2] /* memory barrier */
+
+	cmp	r10, #TEGRA30
+halted:
+	isb
+	dsb
+	wfine	/* CPU should be power gated here */
+	wfeeq
+
+	/* !!!FIXME!!! Implement halt failure handler */
+	b	halted
+
+/*
+ * tegra30_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * must be executed from IRAM
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_sdram_self_refresh:
+
+	adr	r8, tegra_sdram_pad_save
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	adreq	r2, tegra30_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+	cmp	r10, #TEGRA114
+	adreq	r2, tegra114_sdram_pad_address
+	ldreq	r3, tegra114_sdram_pad_size
+	cmp	r10, #TEGRA124
+	adreq	r2, tegra124_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+
+	mov	r9, #0
+
+padsave:
+	ldr	r0, [r2, r9]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r8, r9]		@ save the content of the addr
+
+	add	r9, r9, #4
+	cmp	r3, r9
+	bne	padsave
+padsave_done:
+
+	dsb
+
+	cmp	r10, #TEGRA30
+	ldreq	r0, =TEGRA_EMC_BASE	@ r0 reserved for emc base addr
+	cmp	r10, #TEGRA114
+	ldreq	r0, =TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	ldreq	r0, =TEGRA124_EMC_BASE
+
+enter_self_refresh:
+	cmp	r10, #TEGRA30
+	mov	r1, #0
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 28)
+	bicne	r1, r1, #(1 << 29)
+	str	r1, [r0, #EMC_CFG]	@ disable DYN_SELF_REF
+
+	emc_timing_update r1, r0
+
+	ldr	r1, [r7]
+	add	r1, r1, #5
+	wait_until r1, r7, r2
+
+emc_wait_auto_cal:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal
+
+	mov	r1, #3
+	str	r1, [r0, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r1, [r0, #EMC_EMC_STATUS]
+	tst	r1, #4
+	beq	emcidle
+
+	mov	r1, #1
+	str	r1, [r0, #EMC_SELF_REF]
+
+	emc_device_mask r1, r0
+
+emcself:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	and	r2, r2, r1
+	cmp	r2, r1
+	bne	emcself			@ loop until DDR in self-refresh
+
+	/* Put VTTGEN in the lowest power mode */
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	mov32	r2, 0xF8F8FFFF	@ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
+	and	r1, r1, r2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	cmp	r10, #TEGRA30
+	orreq	r1, r1, #7		@ set E_NO_VTTGEN
+	orrne	r1, r1, #0x3f
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+
+	emc_timing_update r1, r0
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	bne	enter_self_refresh
+no_dual_emc_chanl:
+
+	ldr	r1, [r4, #PMC_CTRL]
+	tst	r1, #PMC_CTRL_SIDE_EFFECT_LP0
+	bne	pmc_io_dpd_skip
+	/*
+	 * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
+	 * and COMP in the lowest power mode when LP1.
+	 */
+	mov32	r1, 0x8EC00000
+	str	r1, [r4, #PMC_IO_DPD_REQ]
+pmc_io_dpd_skip:
+
+	dsb
+
+	ret	lr
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.global tegra30_iram_end
+tegra30_iram_end:
+	b	.
+#endif