Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/arch/m68k/coldfire/m5307.c b/arch/m68k/coldfire/m5307.c
new file mode 100644
index 000000000..4ed2e43ab
--- /dev/null
+++ b/arch/m68k/coldfire/m5307.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m5307.c  -- platform support for ColdFire 5307 based boards
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+/*
+ *	Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+
+static struct clk_lookup m5307_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "pll.0", &clk_pll),
+	CLKDEV_INIT(NULL, "sys.0", &clk_sys),
+	CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
+	CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
+	CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
+	CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
+	CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
+};
+
+/***************************************************************************/
+
+static void __init m5307_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel) || \
+    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#endif
+
+	mach_sched_init = hw_timer_init;
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
+
+#ifdef CONFIG_BDM_DISABLE
+	/*
+	 * Disable the BDM clocking.  This also turns off most of the rest of
+	 * the BDM device.  This is good for EMC reasons. This option is not
+	 * incompatible with the memory protection option.
+	 */
+	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+	m5307_i2c_init();
+
+	clkdev_add_table(m5307_clk_lookup, ARRAY_SIZE(m5307_clk_lookup));
+}
+
+/***************************************************************************/