Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 178 insertions, 0 deletions

diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
new file mode 100644
index 000000000..a9bea411d
--- /dev/null
+++ b/arch/mips/bcm47xx/prom.c
@@ -0,0 +1,178 @@
+/*
+ *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ *  Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/spinlock.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/smp.h>
+#include <asm/bootinfo.h>
+#include <bcm47xx.h>
+#include <bcm47xx_board.h>
+
+static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
+
+const char *get_system_type(void)
+{
+	return bcm47xx_system_type;
+}
+
+__init void bcm47xx_set_system_type(u16 chip_id)
+{
+	snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
+		 (chip_id > 0x9999) ? "Broadcom BCM%d" :
+				      "Broadcom BCM%04X",
+		 chip_id);
+}
+
+static unsigned long lowmem __initdata;
+
+static __init void prom_init_mem(void)
+{
+	unsigned long mem;
+	unsigned long max;
+	unsigned long off;
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* Figure out memory size by finding aliases.
+	 *
+	 * We should theoretically use the mapping from CFE using cfe_enummem().
+	 * However as the BCM47XX is mostly used on low-memory systems, we
+	 * want to reuse the memory used by CFE (around 4MB). That means cfe_*
+	 * functions stop to work at some point during the boot, we should only
+	 * call them at the beginning of the boot.
+	 *
+	 * BCM47XX uses 128MB for addressing the ram, if the system contains
+	 * less than that amount of ram it remaps the ram more often into the
+	 * available space.
+	 */
+
+	/* Physical address, without mapping to any kernel segment */
+	off = CPHYSADDR((unsigned long)prom_init);
+
+	/* Accessing memory after 128 MiB will cause an exception */
+	max = 128 << 20;
+
+	for (mem = 1 << 20; mem < max; mem += 1 << 20) {
+		/* Loop condition may be not enough, off may be over 1 MiB */
+		if (off + mem >= max) {
+			mem = max;
+			pr_debug("Assume 128MB RAM\n");
+			break;
+		}
+		if (!memcmp((void *)prom_init, (void *)prom_init + mem, 32))
+			break;
+	}
+	lowmem = mem;
+
+	/* Ignoring the last page when ddr size is 128M. Cached
+	 * accesses to last page is causing the processor to prefetch
+	 * using address above 128M stepping out of the ddr address
+	 * space.
+	 */
+	if (c->cputype == CPU_74K && (mem == (128  << 20)))
+		mem -= 0x1000;
+	memblock_add(0, mem);
+}
+
+/*
+ * This is the first serial on the chip common core, it is at this position
+ * for sb (ssb) and ai (bcma) bus.
+ */
+#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
+
+void __init prom_init(void)
+{
+	prom_init_mem();
+	setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
+}
+
+#if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM)
+
+#define EXTVBASE	0xc0000000
+#define ENTRYLO(x)	((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1)
+
+#include <asm/tlbflush.h>
+
+/* Stripped version of tlb_init, with the call to build_tlb_refill_handler
+ * dropped. Calling it at this stage causes a hang.
+ */
+void early_tlb_init(void)
+{
+	write_c0_pagemask(PM_DEFAULT_MASK);
+	write_c0_wired(0);
+	temp_tlb_entry = current_cpu_data.tlbsize - 1;
+	local_flush_tlb_all();
+}
+
+void __init bcm47xx_prom_highmem_init(void)
+{
+	unsigned long off = (unsigned long)prom_init;
+	unsigned long extmem = 0;
+	bool highmem_region = false;
+
+	if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA))
+		return;
+
+	if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+		highmem_region = true;
+
+	if (lowmem != 128 << 20 || !highmem_region)
+		return;
+
+	early_tlb_init();
+
+	/* Add one temporary TLB entry to map SDRAM Region 2.
+	 *      Physical        Virtual
+	 *      0x80000000      0xc0000000      (1st: 256MB)
+	 *      0x90000000      0xd0000000      (2nd: 256MB)
+	 */
+	add_temporary_entry(ENTRYLO(0x80000000),
+			    ENTRYLO(0x80000000 + (256 << 20)),
+			    EXTVBASE, PM_256M);
+
+	off = EXTVBASE + __pa(off);
+	for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
+		if (!memcmp((void *)prom_init, (void *)(off + extmem), 16))
+			break;
+	}
+	extmem -= lowmem;
+
+	early_tlb_init();
+
+	if (!extmem)
+		return;
+
+	pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",
+		extmem >> 20);
+
+	/* TODO: Register extra memory */
+}
+
+#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */