Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 422 insertions, 0 deletions

diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
new file mode 100644
index 000000000..cb16be93b
--- /dev/null
+++ b/arch/mips/include/asm/hazards.h
@@ -0,0 +1,422 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef _ASM_HAZARDS_H
+#define _ASM_HAZARDS_H
+
+#include <linux/stringify.h>
+#include <asm/compiler.h>
+
+#define ___ssnop							\
+	sll	$0, $0, 1
+
+#define ___ehb								\
+	sll	$0, $0, 3
+
+/*
+ * TLB hazards
+ */
+#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+     defined(CONFIG_CPU_MIPSR6)) && \
+    !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
+
+/*
+ * MIPSR2 defines ehb for hazard avoidance
+ */
+
+#define __mtc0_tlbw_hazard						\
+	___ehb
+
+#define __mtc0_tlbr_hazard						\
+	___ehb
+
+#define __tlbw_use_hazard						\
+	___ehb
+
+#define __tlb_read_hazard						\
+	___ehb
+
+#define __tlb_probe_hazard						\
+	___ehb
+
+#define __irq_enable_hazard						\
+	___ehb
+
+#define __irq_disable_hazard						\
+	___ehb
+
+#define __back_to_back_c0_hazard					\
+	___ehb
+
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler.	Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alternative is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code...
+ */
+#define instruction_hazard()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set "MIPS_ISA_LEVEL"				\n"	\
+	"	dla	%0, 1f					\n"	\
+	"	jr.hb	%0					\n"	\
+	"	.set	pop					\n"	\
+	"1:							\n"	\
+	: "=r" (tmp));							\
+} while (0)
+
+#elif (defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY)) || \
+	defined(CONFIG_CPU_BMIPS)
+
+/*
+ * These are slightly complicated by the fact that we guarantee R1 kernels to
+ * run fine on R2 processors.
+ */
+
+#define __mtc0_tlbw_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __mtc0_tlbr_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __tlbw_use_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __tlb_read_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __tlb_probe_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __irq_enable_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __irq_disable_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+#define __back_to_back_c0_hazard					\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop;							\
+	___ehb
+
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler.	Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alternative is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code...
+ */
+#define __instruction_hazard()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips64r2				\n"	\
+	"	dla	%0, 1f					\n"	\
+	"	jr.hb	%0					\n"	\
+	"	.set	pop					\n"	\
+	"1:							\n"	\
+	: "=r" (tmp));							\
+} while (0)
+
+#define instruction_hazard()						\
+do {									\
+	if (cpu_has_mips_r2_r6)						\
+		__instruction_hazard();					\
+} while (0)
+
+#elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+	defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_CPU_LOONGSON64) || \
+	defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+#define __mtc0_tlbw_hazard
+
+#define __mtc0_tlbr_hazard
+
+#define __tlbw_use_hazard
+
+#define __tlb_read_hazard
+
+#define __tlb_probe_hazard
+
+#define __irq_enable_hazard
+
+#define __irq_disable_hazard
+
+#define __back_to_back_c0_hazard
+
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_SB1)
+
+/*
+ * Mostly like R4000 for historic reasons
+ */
+#define __mtc0_tlbw_hazard
+
+#define __mtc0_tlbr_hazard
+
+#define __tlbw_use_hazard
+
+#define __tlb_read_hazard
+
+#define __tlb_probe_hazard
+
+#define __irq_enable_hazard
+
+#define __irq_disable_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop
+
+#define __back_to_back_c0_hazard
+
+#define instruction_hazard() do { } while (0)
+
+#else
+
+/*
+ * Finally the catchall case for all other processors including R4000, R4400,
+ * R4600, R4700, R5000, RM7000, NEC VR41xx etc.
+ *
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400.  Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+#define __mtc0_tlbw_hazard						\
+	nop;								\
+	nop
+
+#define __mtc0_tlbr_hazard						\
+	nop;								\
+	nop
+
+#define __tlbw_use_hazard						\
+	nop;								\
+	nop;								\
+	nop
+
+#define __tlb_read_hazard						\
+	nop;								\
+	nop;								\
+	nop
+
+#define __tlb_probe_hazard						\
+	nop;								\
+	nop;								\
+	nop
+
+#define __irq_enable_hazard						\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop
+
+#define __irq_disable_hazard						\
+	nop;								\
+	nop;								\
+	nop
+
+#define __back_to_back_c0_hazard					\
+	___ssnop;							\
+	___ssnop;							\
+	___ssnop
+
+#define instruction_hazard() do { } while (0)
+
+#endif
+
+
+/* FPU hazards */
+
+#if defined(CONFIG_CPU_SB1)
+
+#define __enable_fpu_hazard						\
+	.set	push;							\
+	.set	mips64;							\
+	.set	noreorder;						\
+	___ssnop;							\
+	bnezl	$0, .+4;						\
+	___ssnop;							\
+	.set	pop
+
+#define __disable_fpu_hazard
+
+#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+      defined(CONFIG_CPU_MIPSR6)
+
+#define __enable_fpu_hazard						\
+	___ehb
+
+#define __disable_fpu_hazard						\
+	___ehb
+
+#else
+
+#define __enable_fpu_hazard						\
+	nop;								\
+	nop;								\
+	nop;								\
+	nop
+
+#define __disable_fpu_hazard						\
+	___ehb
+
+#endif
+
+#ifdef __ASSEMBLY__
+
+#define _ssnop ___ssnop
+#define	_ehb ___ehb
+#define mtc0_tlbw_hazard __mtc0_tlbw_hazard
+#define mtc0_tlbr_hazard __mtc0_tlbr_hazard
+#define tlbw_use_hazard __tlbw_use_hazard
+#define tlb_read_hazard __tlb_read_hazard
+#define tlb_probe_hazard __tlb_probe_hazard
+#define irq_enable_hazard __irq_enable_hazard
+#define irq_disable_hazard __irq_disable_hazard
+#define back_to_back_c0_hazard __back_to_back_c0_hazard
+#define enable_fpu_hazard __enable_fpu_hazard
+#define disable_fpu_hazard __disable_fpu_hazard
+
+#else
+
+#define _ssnop()							\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(___ssnop)						\
+	);								\
+} while (0)
+
+#define	_ehb()								\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(___ehb)						\
+	);								\
+} while (0)
+
+
+#define mtc0_tlbw_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__mtc0_tlbw_hazard)					\
+	);								\
+} while (0)
+
+
+#define mtc0_tlbr_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__mtc0_tlbr_hazard)					\
+	);								\
+} while (0)
+
+
+#define tlbw_use_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__tlbw_use_hazard)					\
+	);								\
+} while (0)
+
+
+#define tlb_read_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__tlb_read_hazard)					\
+	);								\
+} while (0)
+
+
+#define tlb_probe_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__tlb_probe_hazard)					\
+	);								\
+} while (0)
+
+
+#define irq_enable_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__irq_enable_hazard)				\
+	);								\
+} while (0)
+
+
+#define irq_disable_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__irq_disable_hazard)				\
+	);								\
+} while (0)
+
+
+#define back_to_back_c0_hazard() 					\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__back_to_back_c0_hazard)				\
+	);								\
+} while (0)
+
+
+#define enable_fpu_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__enable_fpu_hazard)				\
+	);								\
+} while (0)
+
+
+#define disable_fpu_hazard()						\
+do {									\
+	__asm__ __volatile__(						\
+	__stringify(__disable_fpu_hazard)				\
+	);								\
+} while (0)
+
+/*
+ * MIPS R2 instruction hazard barrier.   Needs to be called as a subroutine.
+ */
+extern void mips_ihb(void);
+
+#endif /* __ASSEMBLY__  */
+
+#endif /* _ASM_HAZARDS_H */