Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 83 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644
index 000000000..299ee7be0
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Misc Debug */
+#define SPRN_DPDR	630
+#define SPRN_MI_CAM	816
+#define SPRN_MI_RAM0	817
+#define SPRN_MI_RAM1	818
+#define SPRN_MD_CAM	824
+#define SPRN_MD_RAM0	825
+#define SPRN_MD_RAM1	826
+
+/* Special MSR manipulation registers */
+#define SPRN_EIE	80	/* External interrupt enable (EE=1, RI=1) */
+#define SPRN_EID	81	/* External interrupt disable (EE=0, RI=1) */
+#define SPRN_NRI	82	/* Non recoverable interrupt (EE=0, RI=0) */
+
+/* Debug registers */
+#define SPRN_CMPA	144
+#define SPRN_COUNTA	150
+#define SPRN_CMPE	152
+#define SPRN_CMPF	153
+#define SPRN_LCTRL1	156
+#define   LCTRL1_CTE_GT		0xc0000000
+#define   LCTRL1_CTF_LT		0x14000000
+#define   LCTRL1_CRWE_RW	0x00000000
+#define   LCTRL1_CRWE_RO	0x00040000
+#define   LCTRL1_CRWE_WO	0x000c0000
+#define   LCTRL1_CRWF_RW	0x00000000
+#define   LCTRL1_CRWF_RO	0x00010000
+#define   LCTRL1_CRWF_WO	0x00030000
+#define SPRN_LCTRL2	157
+#define   LCTRL2_LW0EN		0x80000000
+#define   LCTRL2_LW0LA_E	0x00000000
+#define   LCTRL2_LW0LA_F	0x04000000
+#define   LCTRL2_LW0LA_EandF	0x08000000
+#define   LCTRL2_LW0LADC	0x02000000
+#define   LCTRL2_SLW0EN		0x00000002
+#ifdef CONFIG_PPC_8xx
+#define SPRN_ICTRL	158
+#endif
+#define SPRN_BAR	159
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */