summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/eeh.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /arch/powerpc/kernel/eeh.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/powerpc/kernel/eeh.c')
-rw-r--r--arch/powerpc/kernel/eeh.c1941
1 files changed, 1941 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
new file mode 100644
index 000000000..ab316e155
--- /dev/null
+++ b/arch/powerpc/kernel/eeh.c
@@ -0,0 +1,1941 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright IBM Corporation 2001, 2005, 2006
+ * Copyright Dave Engebretsen & Todd Inglett 2001
+ * Copyright Linas Vepstas 2005, 2006
+ * Copyright 2001-2012 IBM Corporation.
+ *
+ * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/iommu.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/reboot.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/debugfs.h>
+
+#include <linux/atomic.h>
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/rtas.h>
+#include <asm/pte-walk.h>
+
+
+/** Overview:
+ * EEH, or "Enhanced Error Handling" is a PCI bridge technology for
+ * dealing with PCI bus errors that can't be dealt with within the
+ * usual PCI framework, except by check-stopping the CPU. Systems
+ * that are designed for high-availability/reliability cannot afford
+ * to crash due to a "mere" PCI error, thus the need for EEH.
+ * An EEH-capable bridge operates by converting a detected error
+ * into a "slot freeze", taking the PCI adapter off-line, making
+ * the slot behave, from the OS'es point of view, as if the slot
+ * were "empty": all reads return 0xff's and all writes are silently
+ * ignored. EEH slot isolation events can be triggered by parity
+ * errors on the address or data busses (e.g. during posted writes),
+ * which in turn might be caused by low voltage on the bus, dust,
+ * vibration, humidity, radioactivity or plain-old failed hardware.
+ *
+ * Note, however, that one of the leading causes of EEH slot
+ * freeze events are buggy device drivers, buggy device microcode,
+ * or buggy device hardware. This is because any attempt by the
+ * device to bus-master data to a memory address that is not
+ * assigned to the device will trigger a slot freeze. (The idea
+ * is to prevent devices-gone-wild from corrupting system memory).
+ * Buggy hardware/drivers will have a miserable time co-existing
+ * with EEH.
+ *
+ * Ideally, a PCI device driver, when suspecting that an isolation
+ * event has occurred (e.g. by reading 0xff's), will then ask EEH
+ * whether this is the case, and then take appropriate steps to
+ * reset the PCI slot, the PCI device, and then resume operations.
+ * However, until that day, the checking is done here, with the
+ * eeh_check_failure() routine embedded in the MMIO macros. If
+ * the slot is found to be isolated, an "EEH Event" is synthesized
+ * and sent out for processing.
+ */
+
+/* If a device driver keeps reading an MMIO register in an interrupt
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
+ */
+#define EEH_MAX_FAILS 2100000
+
+/* Time to wait for a PCI slot to report status, in milliseconds */
+#define PCI_BUS_RESET_WAIT_MSEC (5*60*1000)
+
+/*
+ * EEH probe mode support, which is part of the flags,
+ * is to support multiple platforms for EEH. Some platforms
+ * like pSeries do PCI emunation based on device tree.
+ * However, other platforms like powernv probe PCI devices
+ * from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for
+ * particular OF node or PCI device so that the corresponding
+ * PE would be created there.
+ */
+int eeh_subsystem_flags;
+EXPORT_SYMBOL(eeh_subsystem_flags);
+
+/*
+ * EEH allowed maximal frozen times. If one particular PE's
+ * frozen count in last hour exceeds this limit, the PE will
+ * be forced to be offline permanently.
+ */
+u32 eeh_max_freezes = 5;
+
+/*
+ * Controls whether a recovery event should be scheduled when an
+ * isolated device is discovered. This is only really useful for
+ * debugging problems with the EEH core.
+ */
+bool eeh_debugfs_no_recover;
+
+/* Platform dependent EEH operations */
+struct eeh_ops *eeh_ops = NULL;
+
+/* Lock to avoid races due to multiple reports of an error */
+DEFINE_RAW_SPINLOCK(confirm_error_lock);
+EXPORT_SYMBOL_GPL(confirm_error_lock);
+
+/* Lock to protect passed flags */
+static DEFINE_MUTEX(eeh_dev_mutex);
+
+/* Buffer for reporting pci register dumps. Its here in BSS, and
+ * not dynamically alloced, so that it ends up in RMO where RTAS
+ * can access it.
+ */
+#define EEH_PCI_REGS_LOG_LEN 8192
+static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
+
+/*
+ * The struct is used to maintain the EEH global statistic
+ * information. Besides, the EEH global statistics will be
+ * exported to user space through procfs
+ */
+struct eeh_stats {
+ u64 no_device; /* PCI device not found */
+ u64 no_dn; /* OF node not found */
+ u64 no_cfg_addr; /* Config address not found */
+ u64 ignored_check; /* EEH check skipped */
+ u64 total_mmio_ffs; /* Total EEH checks */
+ u64 false_positives; /* Unnecessary EEH checks */
+ u64 slot_resets; /* PE reset */
+};
+
+static struct eeh_stats eeh_stats;
+
+static int __init eeh_setup(char *str)
+{
+ if (!strcmp(str, "off"))
+ eeh_add_flag(EEH_FORCE_DISABLED);
+ else if (!strcmp(str, "early_log"))
+ eeh_add_flag(EEH_EARLY_DUMP_LOG);
+
+ return 1;
+}
+__setup("eeh=", eeh_setup);
+
+void eeh_show_enabled(void)
+{
+ if (eeh_has_flag(EEH_FORCE_DISABLED))
+ pr_info("EEH: Recovery disabled by kernel parameter.\n");
+ else if (eeh_has_flag(EEH_ENABLED))
+ pr_info("EEH: Capable adapter found: recovery enabled.\n");
+ else
+ pr_info("EEH: No capable adapters found: recovery disabled.\n");
+}
+
+/*
+ * This routine captures assorted PCI configuration space data
+ * for the indicated PCI device, and puts them into a buffer
+ * for RTAS error logging.
+ */
+static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
+{
+ u32 cfg;
+ int cap, i;
+ int n = 0, l = 0;
+ char buffer[128];
+
+ n += scnprintf(buf+n, len-n, "%04x:%02x:%02x.%01x\n",
+ edev->pe->phb->global_number, edev->bdfn >> 8,
+ PCI_SLOT(edev->bdfn), PCI_FUNC(edev->bdfn));
+ pr_warn("EEH: of node=%04x:%02x:%02x.%01x\n",
+ edev->pe->phb->global_number, edev->bdfn >> 8,
+ PCI_SLOT(edev->bdfn), PCI_FUNC(edev->bdfn));
+
+ eeh_ops->read_config(edev, PCI_VENDOR_ID, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
+ pr_warn("EEH: PCI device/vendor: %08x\n", cfg);
+
+ eeh_ops->read_config(edev, PCI_COMMAND, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
+ pr_warn("EEH: PCI cmd/status register: %08x\n", cfg);
+
+ /* Gather bridge-specific registers */
+ if (edev->mode & EEH_DEV_BRIDGE) {
+ eeh_ops->read_config(edev, PCI_SEC_STATUS, 2, &cfg);
+ n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
+ pr_warn("EEH: Bridge secondary status: %04x\n", cfg);
+
+ eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &cfg);
+ n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
+ pr_warn("EEH: Bridge control: %04x\n", cfg);
+ }
+
+ /* Dump out the PCI-X command and status regs */
+ cap = edev->pcix_cap;
+ if (cap) {
+ eeh_ops->read_config(edev, cap, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
+ pr_warn("EEH: PCI-X cmd: %08x\n", cfg);
+
+ eeh_ops->read_config(edev, cap+4, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
+ pr_warn("EEH: PCI-X status: %08x\n", cfg);
+ }
+
+ /* If PCI-E capable, dump PCI-E cap 10 */
+ cap = edev->pcie_cap;
+ if (cap) {
+ n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
+ pr_warn("EEH: PCI-E capabilities and status follow:\n");
+
+ for (i=0; i<=8; i++) {
+ eeh_ops->read_config(edev, cap+4*i, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+
+ if ((i % 4) == 0) {
+ if (i != 0)
+ pr_warn("%s\n", buffer);
+
+ l = scnprintf(buffer, sizeof(buffer),
+ "EEH: PCI-E %02x: %08x ",
+ 4*i, cfg);
+ } else {
+ l += scnprintf(buffer+l, sizeof(buffer)-l,
+ "%08x ", cfg);
+ }
+
+ }
+
+ pr_warn("%s\n", buffer);
+ }
+
+ /* If AER capable, dump it */
+ cap = edev->aer_cap;
+ if (cap) {
+ n += scnprintf(buf+n, len-n, "pci-e AER:\n");
+ pr_warn("EEH: PCI-E AER capability register set follows:\n");
+
+ for (i=0; i<=13; i++) {
+ eeh_ops->read_config(edev, cap+4*i, 4, &cfg);
+ n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+
+ if ((i % 4) == 0) {
+ if (i != 0)
+ pr_warn("%s\n", buffer);
+
+ l = scnprintf(buffer, sizeof(buffer),
+ "EEH: PCI-E AER %02x: %08x ",
+ 4*i, cfg);
+ } else {
+ l += scnprintf(buffer+l, sizeof(buffer)-l,
+ "%08x ", cfg);
+ }
+ }
+
+ pr_warn("%s\n", buffer);
+ }
+
+ return n;
+}
+
+static void *eeh_dump_pe_log(struct eeh_pe *pe, void *flag)
+{
+ struct eeh_dev *edev, *tmp;
+ size_t *plen = flag;
+
+ eeh_pe_for_each_dev(pe, edev, tmp)
+ *plen += eeh_dump_dev_log(edev, pci_regs_buf + *plen,
+ EEH_PCI_REGS_LOG_LEN - *plen);
+
+ return NULL;
+}
+
+/**
+ * eeh_slot_error_detail - Generate combined log including driver log and error log
+ * @pe: EEH PE
+ * @severity: temporary or permanent error log
+ *
+ * This routine should be called to generate the combined log, which
+ * is comprised of driver log and error log. The driver log is figured
+ * out from the config space of the corresponding PCI device, while
+ * the error log is fetched through platform dependent function call.
+ */
+void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
+{
+ size_t loglen = 0;
+
+ /*
+ * When the PHB is fenced or dead, it's pointless to collect
+ * the data from PCI config space because it should return
+ * 0xFF's. For ER, we still retrieve the data from the PCI
+ * config space.
+ *
+ * For pHyp, we have to enable IO for log retrieval. Otherwise,
+ * 0xFF's is always returned from PCI config space.
+ *
+ * When the @severity is EEH_LOG_PERM, the PE is going to be
+ * removed. Prior to that, the drivers for devices included in
+ * the PE will be closed. The drivers rely on working IO path
+ * to bring the devices to quiet state. Otherwise, PCI traffic
+ * from those devices after they are removed is like to cause
+ * another unexpected EEH error.
+ */
+ if (!(pe->type & EEH_PE_PHB)) {
+ if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG) ||
+ severity == EEH_LOG_PERM)
+ eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+
+ /*
+ * The config space of some PCI devices can't be accessed
+ * when their PEs are in frozen state. Otherwise, fenced
+ * PHB might be seen. Those PEs are identified with flag
+ * EEH_PE_CFG_RESTRICTED, indicating EEH_PE_CFG_BLOCKED
+ * is set automatically when the PE is put to EEH_PE_ISOLATED.
+ *
+ * Restoring BARs possibly triggers PCI config access in
+ * (OPAL) firmware and then causes fenced PHB. If the
+ * PCI config is blocked with flag EEH_PE_CFG_BLOCKED, it's
+ * pointless to restore BARs and dump config space.
+ */
+ eeh_ops->configure_bridge(pe);
+ if (!(pe->state & EEH_PE_CFG_BLOCKED)) {
+ eeh_pe_restore_bars(pe);
+
+ pci_regs_buf[0] = 0;
+ eeh_pe_traverse(pe, eeh_dump_pe_log, &loglen);
+ }
+ }
+
+ eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
+}
+
+/**
+ * eeh_token_to_phys - Convert EEH address token to phys address
+ * @token: I/O token, should be address in the form 0xA....
+ *
+ * This routine should be called to convert virtual I/O address
+ * to physical one.
+ */
+static inline unsigned long eeh_token_to_phys(unsigned long token)
+{
+ return ppc_find_vmap_phys(token);
+}
+
+/*
+ * On PowerNV platform, we might already have fenced PHB there.
+ * For that case, it's meaningless to recover frozen PE. Intead,
+ * We have to handle fenced PHB firstly.
+ */
+static int eeh_phb_check_failure(struct eeh_pe *pe)
+{
+ struct eeh_pe *phb_pe;
+ unsigned long flags;
+ int ret;
+
+ if (!eeh_has_flag(EEH_PROBE_MODE_DEV))
+ return -EPERM;
+
+ /* Find the PHB PE */
+ phb_pe = eeh_phb_pe_get(pe->phb);
+ if (!phb_pe) {
+ pr_warn("%s Can't find PE for PHB#%x\n",
+ __func__, pe->phb->global_number);
+ return -EEXIST;
+ }
+
+ /* If the PHB has been in problematic state */
+ eeh_serialize_lock(&flags);
+ if (phb_pe->state & EEH_PE_ISOLATED) {
+ ret = 0;
+ goto out;
+ }
+
+ /* Check PHB state */
+ ret = eeh_ops->get_state(phb_pe, NULL);
+ if ((ret < 0) ||
+ (ret == EEH_STATE_NOT_SUPPORT) || eeh_state_active(ret)) {
+ ret = 0;
+ goto out;
+ }
+
+ /* Isolate the PHB and send event */
+ eeh_pe_mark_isolated(phb_pe);
+ eeh_serialize_unlock(flags);
+
+ pr_debug("EEH: PHB#%x failure detected, location: %s\n",
+ phb_pe->phb->global_number, eeh_pe_loc_get(phb_pe));
+ eeh_send_failure_event(phb_pe);
+ return 1;
+out:
+ eeh_serialize_unlock(flags);
+ return ret;
+}
+
+static inline const char *eeh_driver_name(struct pci_dev *pdev)
+{
+ if (pdev)
+ return dev_driver_string(&pdev->dev);
+
+ return "<null>";
+}
+
+/**
+ * eeh_dev_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @edev: eeh device
+ *
+ * Check for an EEH failure for the given device node. Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze. This routine
+ * will query firmware for the EEH status.
+ *
+ * Returns 0 if there has not been an EEH error; otherwise returns
+ * a non-zero value and queues up a slot isolation event notification.
+ *
+ * It is safe to call this routine in an interrupt context.
+ */
+int eeh_dev_check_failure(struct eeh_dev *edev)
+{
+ int ret;
+ unsigned long flags;
+ struct device_node *dn;
+ struct pci_dev *dev;
+ struct eeh_pe *pe, *parent_pe;
+ int rc = 0;
+ const char *location = NULL;
+
+ eeh_stats.total_mmio_ffs++;
+
+ if (!eeh_enabled())
+ return 0;
+
+ if (!edev) {
+ eeh_stats.no_dn++;
+ return 0;
+ }
+ dev = eeh_dev_to_pci_dev(edev);
+ pe = eeh_dev_to_pe(edev);
+
+ /* Access to IO BARs might get this far and still not want checking. */
+ if (!pe) {
+ eeh_stats.ignored_check++;
+ eeh_edev_dbg(edev, "Ignored check\n");
+ return 0;
+ }
+
+ /*
+ * On PowerNV platform, we might already have fenced PHB
+ * there and we need take care of that firstly.
+ */
+ ret = eeh_phb_check_failure(pe);
+ if (ret > 0)
+ return ret;
+
+ /*
+ * If the PE isn't owned by us, we shouldn't check the
+ * state. Instead, let the owner handle it if the PE has
+ * been frozen.
+ */
+ if (eeh_pe_passed(pe))
+ return 0;
+
+ /* If we already have a pending isolation event for this
+ * slot, we know it's bad already, we don't need to check.
+ * Do this checking under a lock; as multiple PCI devices
+ * in one slot might report errors simultaneously, and we
+ * only want one error recovery routine running.
+ */
+ eeh_serialize_lock(&flags);
+ rc = 1;
+ if (pe->state & EEH_PE_ISOLATED) {
+ pe->check_count++;
+ if (pe->check_count == EEH_MAX_FAILS) {
+ dn = pci_device_to_OF_node(dev);
+ if (dn)
+ location = of_get_property(dn, "ibm,loc-code",
+ NULL);
+ eeh_edev_err(edev, "%d reads ignored for recovering device at location=%s driver=%s\n",
+ pe->check_count,
+ location ? location : "unknown",
+ eeh_driver_name(dev));
+ eeh_edev_err(edev, "Might be infinite loop in %s driver\n",
+ eeh_driver_name(dev));
+ dump_stack();
+ }
+ goto dn_unlock;
+ }
+
+ /*
+ * Now test for an EEH failure. This is VERY expensive.
+ * Note that the eeh_config_addr may be a parent device
+ * in the case of a device behind a bridge, or it may be
+ * function zero of a multi-function device.
+ * In any case they must share a common PHB.
+ */
+ ret = eeh_ops->get_state(pe, NULL);
+
+ /* Note that config-io to empty slots may fail;
+ * they are empty when they don't have children.
+ * We will punt with the following conditions: Failure to get
+ * PE's state, EEH not support and Permanently unavailable
+ * state, PE is in good state.
+ */
+ if ((ret < 0) ||
+ (ret == EEH_STATE_NOT_SUPPORT) || eeh_state_active(ret)) {
+ eeh_stats.false_positives++;
+ pe->false_positives++;
+ rc = 0;
+ goto dn_unlock;
+ }
+
+ /*
+ * It should be corner case that the parent PE has been
+ * put into frozen state as well. We should take care
+ * that at first.
+ */
+ parent_pe = pe->parent;
+ while (parent_pe) {
+ /* Hit the ceiling ? */
+ if (parent_pe->type & EEH_PE_PHB)
+ break;
+
+ /* Frozen parent PE ? */
+ ret = eeh_ops->get_state(parent_pe, NULL);
+ if (ret > 0 && !eeh_state_active(ret)) {
+ pe = parent_pe;
+ pr_err("EEH: Failure of PHB#%x-PE#%x will be handled at parent PHB#%x-PE#%x.\n",
+ pe->phb->global_number, pe->addr,
+ pe->phb->global_number, parent_pe->addr);
+ }
+
+ /* Next parent level */
+ parent_pe = parent_pe->parent;
+ }
+
+ eeh_stats.slot_resets++;
+
+ /* Avoid repeated reports of this failure, including problems
+ * with other functions on this device, and functions under
+ * bridges.
+ */
+ eeh_pe_mark_isolated(pe);
+ eeh_serialize_unlock(flags);
+
+ /* Most EEH events are due to device driver bugs. Having
+ * a stack trace will help the device-driver authors figure
+ * out what happened. So print that out.
+ */
+ pr_debug("EEH: %s: Frozen PHB#%x-PE#%x detected\n",
+ __func__, pe->phb->global_number, pe->addr);
+ eeh_send_failure_event(pe);
+
+ return 1;
+
+dn_unlock:
+ eeh_serialize_unlock(flags);
+ return rc;
+}
+
+EXPORT_SYMBOL_GPL(eeh_dev_check_failure);
+
+/**
+ * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @token: I/O address
+ *
+ * Check for an EEH failure at the given I/O address. Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze event. This routine
+ * will query firmware for the EEH status.
+ *
+ * Note this routine is safe to call in an interrupt context.
+ */
+int eeh_check_failure(const volatile void __iomem *token)
+{
+ unsigned long addr;
+ struct eeh_dev *edev;
+
+ /* Finding the phys addr + pci device; this is pretty quick. */
+ addr = eeh_token_to_phys((unsigned long __force) token);
+ edev = eeh_addr_cache_get_dev(addr);
+ if (!edev) {
+ eeh_stats.no_device++;
+ return 0;
+ }
+
+ return eeh_dev_check_failure(edev);
+}
+EXPORT_SYMBOL(eeh_check_failure);
+
+
+/**
+ * eeh_pci_enable - Enable MMIO or DMA transfers for this slot
+ * @pe: EEH PE
+ * @function: EEH option
+ *
+ * This routine should be called to reenable frozen MMIO or DMA
+ * so that it would work correctly again. It's useful while doing
+ * recovery or log collection on the indicated device.
+ */
+int eeh_pci_enable(struct eeh_pe *pe, int function)
+{
+ int active_flag, rc;
+
+ /*
+ * pHyp doesn't allow to enable IO or DMA on unfrozen PE.
+ * Also, it's pointless to enable them on unfrozen PE. So
+ * we have to check before enabling IO or DMA.
+ */
+ switch (function) {
+ case EEH_OPT_THAW_MMIO:
+ active_flag = EEH_STATE_MMIO_ACTIVE | EEH_STATE_MMIO_ENABLED;
+ break;
+ case EEH_OPT_THAW_DMA:
+ active_flag = EEH_STATE_DMA_ACTIVE;
+ break;
+ case EEH_OPT_DISABLE:
+ case EEH_OPT_ENABLE:
+ case EEH_OPT_FREEZE_PE:
+ active_flag = 0;
+ break;
+ default:
+ pr_warn("%s: Invalid function %d\n",
+ __func__, function);
+ return -EINVAL;
+ }
+
+ /*
+ * Check if IO or DMA has been enabled before
+ * enabling them.
+ */
+ if (active_flag) {
+ rc = eeh_ops->get_state(pe, NULL);
+ if (rc < 0)
+ return rc;
+
+ /* Needn't enable it at all */
+ if (rc == EEH_STATE_NOT_SUPPORT)
+ return 0;
+
+ /* It's already enabled */
+ if (rc & active_flag)
+ return 0;
+ }
+
+
+ /* Issue the request */
+ rc = eeh_ops->set_option(pe, function);
+ if (rc)
+ pr_warn("%s: Unexpected state change %d on "
+ "PHB#%x-PE#%x, err=%d\n",
+ __func__, function, pe->phb->global_number,
+ pe->addr, rc);
+
+ /* Check if the request is finished successfully */
+ if (active_flag) {
+ rc = eeh_wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+ if (rc < 0)
+ return rc;
+
+ if (rc & active_flag)
+ return 0;
+
+ return -EIO;
+ }
+
+ return rc;
+}
+
+static void eeh_disable_and_save_dev_state(struct eeh_dev *edev,
+ void *userdata)
+{
+ struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
+ struct pci_dev *dev = userdata;
+
+ /*
+ * The caller should have disabled and saved the
+ * state for the specified device
+ */
+ if (!pdev || pdev == dev)
+ return;
+
+ /* Ensure we have D0 power state */
+ pci_set_power_state(pdev, PCI_D0);
+
+ /* Save device state */
+ pci_save_state(pdev);
+
+ /*
+ * Disable device to avoid any DMA traffic and
+ * interrupt from the device
+ */
+ pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+}
+
+static void eeh_restore_dev_state(struct eeh_dev *edev, void *userdata)
+{
+ struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
+ struct pci_dev *dev = userdata;
+
+ if (!pdev)
+ return;
+
+ /* Apply customization from firmware */
+ if (eeh_ops->restore_config)
+ eeh_ops->restore_config(edev);
+
+ /* The caller should restore state for the specified device */
+ if (pdev != dev)
+ pci_restore_state(pdev);
+}
+
+/**
+ * pcibios_set_pcie_reset_state - Set PCI-E reset state
+ * @dev: pci device struct
+ * @state: reset state to enter
+ *
+ * Return value:
+ * 0 if success
+ */
+int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
+{
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+ struct eeh_pe *pe = eeh_dev_to_pe(edev);
+
+ if (!pe) {
+ pr_err("%s: No PE found on PCI device %s\n",
+ __func__, pci_name(dev));
+ return -EINVAL;
+ }
+
+ switch (state) {
+ case pcie_deassert_reset:
+ eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+ eeh_unfreeze_pe(pe);
+ if (!(pe->type & EEH_PE_VF))
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED, true);
+ eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED, true);
+ break;
+ case pcie_hot_reset:
+ eeh_pe_mark_isolated(pe);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED, true);
+ eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+ eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
+ if (!(pe->type & EEH_PE_VF))
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
+ eeh_ops->reset(pe, EEH_RESET_HOT);
+ break;
+ case pcie_warm_reset:
+ eeh_pe_mark_isolated(pe);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED, true);
+ eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+ eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
+ if (!(pe->type & EEH_PE_VF))
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
+ eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
+ break;
+ default:
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED, true);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * eeh_set_dev_freset - Check the required reset for the indicated device
+ * @edev: EEH device
+ * @flag: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collected the information for
+ * the indicated device and its children so that the bunch of the
+ * devices could be reset properly.
+ */
+static void eeh_set_dev_freset(struct eeh_dev *edev, void *flag)
+{
+ struct pci_dev *dev;
+ unsigned int *freset = (unsigned int *)flag;
+
+ dev = eeh_dev_to_pci_dev(edev);
+ if (dev)
+ *freset |= dev->needs_freset;
+}
+
+static void eeh_pe_refreeze_passed(struct eeh_pe *root)
+{
+ struct eeh_pe *pe;
+ int state;
+
+ eeh_for_each_pe(root, pe) {
+ if (eeh_pe_passed(pe)) {
+ state = eeh_ops->get_state(pe, NULL);
+ if (state &
+ (EEH_STATE_MMIO_ACTIVE | EEH_STATE_MMIO_ENABLED)) {
+ pr_info("EEH: Passed-through PE PHB#%x-PE#%x was thawed by reset, re-freezing for safety.\n",
+ pe->phb->global_number, pe->addr);
+ eeh_pe_set_option(pe, EEH_OPT_FREEZE_PE);
+ }
+ }
+ }
+}
+
+/**
+ * eeh_pe_reset_full - Complete a full reset process on the indicated PE
+ * @pe: EEH PE
+ * @include_passed: include passed-through devices?
+ *
+ * This function executes a full reset procedure on a PE, including setting
+ * the appropriate flags, performing a fundamental or hot reset, and then
+ * deactivating the reset status. It is designed to be used within the EEH
+ * subsystem, as opposed to eeh_pe_reset which is exported to drivers and
+ * only performs a single operation at a time.
+ *
+ * This function will attempt to reset a PE three times before failing.
+ */
+int eeh_pe_reset_full(struct eeh_pe *pe, bool include_passed)
+{
+ int reset_state = (EEH_PE_RESET | EEH_PE_CFG_BLOCKED);
+ int type = EEH_RESET_HOT;
+ unsigned int freset = 0;
+ int i, state = 0, ret;
+
+ /*
+ * Determine the type of reset to perform - hot or fundamental.
+ * Hot reset is the default operation, unless any device under the
+ * PE requires a fundamental reset.
+ */
+ eeh_pe_dev_traverse(pe, eeh_set_dev_freset, &freset);
+
+ if (freset)
+ type = EEH_RESET_FUNDAMENTAL;
+
+ /* Mark the PE as in reset state and block config space accesses */
+ eeh_pe_state_mark(pe, reset_state);
+
+ /* Make three attempts at resetting the bus */
+ for (i = 0; i < 3; i++) {
+ ret = eeh_pe_reset(pe, type, include_passed);
+ if (!ret)
+ ret = eeh_pe_reset(pe, EEH_RESET_DEACTIVATE,
+ include_passed);
+ if (ret) {
+ ret = -EIO;
+ pr_warn("EEH: Failure %d resetting PHB#%x-PE#%x (attempt %d)\n\n",
+ state, pe->phb->global_number, pe->addr, i + 1);
+ continue;
+ }
+ if (i)
+ pr_warn("EEH: PHB#%x-PE#%x: Successful reset (attempt %d)\n",
+ pe->phb->global_number, pe->addr, i + 1);
+
+ /* Wait until the PE is in a functioning state */
+ state = eeh_wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+ if (state < 0) {
+ pr_warn("EEH: Unrecoverable slot failure on PHB#%x-PE#%x",
+ pe->phb->global_number, pe->addr);
+ ret = -ENOTRECOVERABLE;
+ break;
+ }
+ if (eeh_state_active(state))
+ break;
+ else
+ pr_warn("EEH: PHB#%x-PE#%x: Slot inactive after reset: 0x%x (attempt %d)\n",
+ pe->phb->global_number, pe->addr, state, i + 1);
+ }
+
+ /* Resetting the PE may have unfrozen child PEs. If those PEs have been
+ * (potentially) passed through to a guest, re-freeze them:
+ */
+ if (!include_passed)
+ eeh_pe_refreeze_passed(pe);
+
+ eeh_pe_state_clear(pe, reset_state, true);
+ return ret;
+}
+
+/**
+ * eeh_save_bars - Save device bars
+ * @edev: PCI device associated EEH device
+ *
+ * Save the values of the device bars. Unlike the restore
+ * routine, this routine is *not* recursive. This is because
+ * PCI devices are added individually; but, for the restore,
+ * an entire slot is reset at a time.
+ */
+void eeh_save_bars(struct eeh_dev *edev)
+{
+ int i;
+
+ if (!edev)
+ return;
+
+ for (i = 0; i < 16; i++)
+ eeh_ops->read_config(edev, i * 4, 4, &edev->config_space[i]);
+
+ /*
+ * For PCI bridges including root port, we need enable bus
+ * master explicitly. Otherwise, it can't fetch IODA table
+ * entries correctly. So we cache the bit in advance so that
+ * we can restore it after reset, either PHB range or PE range.
+ */
+ if (edev->mode & EEH_DEV_BRIDGE)
+ edev->config_space[1] |= PCI_COMMAND_MASTER;
+}
+
+static int eeh_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ eeh_clear_flag(EEH_ENABLED);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block eeh_reboot_nb = {
+ .notifier_call = eeh_reboot_notifier,
+};
+
+static int eeh_device_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ switch (action) {
+ /*
+ * Note: It's not possible to perform EEH device addition (i.e.
+ * {pseries,pnv}_pcibios_bus_add_device()) here because it depends on
+ * the device's resources, which have not yet been set up.
+ */
+ case BUS_NOTIFY_DEL_DEVICE:
+ eeh_remove_device(to_pci_dev(dev));
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block eeh_device_nb = {
+ .notifier_call = eeh_device_notifier,
+};
+
+/**
+ * eeh_init - System wide EEH initialization
+ * @ops: struct to trace EEH operation callback functions
+ *
+ * It's the platform's job to call this from an arch_initcall().
+ */
+int eeh_init(struct eeh_ops *ops)
+{
+ struct pci_controller *hose, *tmp;
+ int ret = 0;
+
+ /* the platform should only initialise EEH once */
+ if (WARN_ON(eeh_ops))
+ return -EEXIST;
+ if (WARN_ON(!ops))
+ return -ENOENT;
+ eeh_ops = ops;
+
+ /* Register reboot notifier */
+ ret = register_reboot_notifier(&eeh_reboot_nb);
+ if (ret) {
+ pr_warn("%s: Failed to register reboot notifier (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = bus_register_notifier(&pci_bus_type, &eeh_device_nb);
+ if (ret) {
+ pr_warn("%s: Failed to register bus notifier (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /* Initialize PHB PEs */
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+ eeh_phb_pe_create(hose);
+
+ eeh_addr_cache_init();
+
+ /* Initialize EEH event */
+ return eeh_event_init();
+}
+
+/**
+ * eeh_probe_device() - Perform EEH initialization for the indicated pci device
+ * @dev: pci device for which to set up EEH
+ *
+ * This routine must be used to complete EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ */
+void eeh_probe_device(struct pci_dev *dev)
+{
+ struct eeh_dev *edev;
+
+ pr_debug("EEH: Adding device %s\n", pci_name(dev));
+
+ /*
+ * pci_dev_to_eeh_dev() can only work if eeh_probe_dev() was
+ * already called for this device.
+ */
+ if (WARN_ON_ONCE(pci_dev_to_eeh_dev(dev))) {
+ pci_dbg(dev, "Already bound to an eeh_dev!\n");
+ return;
+ }
+
+ edev = eeh_ops->probe(dev);
+ if (!edev) {
+ pr_debug("EEH: Adding device failed\n");
+ return;
+ }
+
+ /*
+ * FIXME: We rely on pcibios_release_device() to remove the
+ * existing EEH state. The release function is only called if
+ * the pci_dev's refcount drops to zero so if something is
+ * keeping a ref to a device (e.g. a filesystem) we need to
+ * remove the old EEH state.
+ *
+ * FIXME: HEY MA, LOOK AT ME, NO LOCKING!
+ */
+ if (edev->pdev && edev->pdev != dev) {
+ eeh_pe_tree_remove(edev);
+ eeh_addr_cache_rmv_dev(edev->pdev);
+ eeh_sysfs_remove_device(edev->pdev);
+
+ /*
+ * We definitely should have the PCI device removed
+ * though it wasn't correctly. So we needn't call
+ * into error handler afterwards.
+ */
+ edev->mode |= EEH_DEV_NO_HANDLER;
+ }
+
+ /* bind the pdev and the edev together */
+ edev->pdev = dev;
+ dev->dev.archdata.edev = edev;
+ eeh_addr_cache_insert_dev(dev);
+ eeh_sysfs_add_device(dev);
+}
+
+/**
+ * eeh_remove_device - Undo EEH setup for the indicated pci device
+ * @dev: pci device to be removed
+ *
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar). It unregisters
+ * the PCI device from the EEH subsystem. I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
+ */
+void eeh_remove_device(struct pci_dev *dev)
+{
+ struct eeh_dev *edev;
+
+ if (!dev || !eeh_enabled())
+ return;
+ edev = pci_dev_to_eeh_dev(dev);
+
+ /* Unregister the device with the EEH/PCI address search system */
+ dev_dbg(&dev->dev, "EEH: Removing device\n");
+
+ if (!edev || !edev->pdev || !edev->pe) {
+ dev_dbg(&dev->dev, "EEH: Device not referenced!\n");
+ return;
+ }
+
+ /*
+ * During the hotplug for EEH error recovery, we need the EEH
+ * device attached to the parent PE in order for BAR restore
+ * a bit later. So we keep it for BAR restore and remove it
+ * from the parent PE during the BAR resotre.
+ */
+ edev->pdev = NULL;
+
+ /*
+ * eeh_sysfs_remove_device() uses pci_dev_to_eeh_dev() so we need to
+ * remove the sysfs files before clearing dev.archdata.edev
+ */
+ if (edev->mode & EEH_DEV_SYSFS)
+ eeh_sysfs_remove_device(dev);
+
+ /*
+ * We're removing from the PCI subsystem, that means
+ * the PCI device driver can't support EEH or not
+ * well. So we rely on hotplug completely to do recovery
+ * for the specific PCI device.
+ */
+ edev->mode |= EEH_DEV_NO_HANDLER;
+
+ eeh_addr_cache_rmv_dev(dev);
+
+ /*
+ * The flag "in_error" is used to trace EEH devices for VFs
+ * in error state or not. It's set in eeh_report_error(). If
+ * it's not set, eeh_report_{reset,resume}() won't be called
+ * for the VF EEH device.
+ */
+ edev->in_error = false;
+ dev->dev.archdata.edev = NULL;
+ if (!(edev->pe->state & EEH_PE_KEEP))
+ eeh_pe_tree_remove(edev);
+ else
+ edev->mode |= EEH_DEV_DISCONNECTED;
+}
+
+int eeh_unfreeze_pe(struct eeh_pe *pe)
+{
+ int ret;
+
+ ret = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+ if (ret) {
+ pr_warn("%s: Failure %d enabling IO on PHB#%x-PE#%x\n",
+ __func__, ret, pe->phb->global_number, pe->addr);
+ return ret;
+ }
+
+ ret = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
+ if (ret) {
+ pr_warn("%s: Failure %d enabling DMA on PHB#%x-PE#%x\n",
+ __func__, ret, pe->phb->global_number, pe->addr);
+ return ret;
+ }
+
+ return ret;
+}
+
+
+static struct pci_device_id eeh_reset_ids[] = {
+ { PCI_DEVICE(0x19a2, 0x0710) }, /* Emulex, BE */
+ { PCI_DEVICE(0x10df, 0xe220) }, /* Emulex, Lancer */
+ { PCI_DEVICE(0x14e4, 0x1657) }, /* Broadcom BCM5719 */
+ { 0 }
+};
+
+static int eeh_pe_change_owner(struct eeh_pe *pe)
+{
+ struct eeh_dev *edev, *tmp;
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int ret;
+
+ /* Check PE state */
+ ret = eeh_ops->get_state(pe, NULL);
+ if (ret < 0 || ret == EEH_STATE_NOT_SUPPORT)
+ return 0;
+
+ /* Unfrozen PE, nothing to do */
+ if (eeh_state_active(ret))
+ return 0;
+
+ /* Frozen PE, check if it needs PE level reset */
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ continue;
+
+ for (id = &eeh_reset_ids[0]; id->vendor != 0; id++) {
+ if (id->vendor != PCI_ANY_ID &&
+ id->vendor != pdev->vendor)
+ continue;
+ if (id->device != PCI_ANY_ID &&
+ id->device != pdev->device)
+ continue;
+ if (id->subvendor != PCI_ANY_ID &&
+ id->subvendor != pdev->subsystem_vendor)
+ continue;
+ if (id->subdevice != PCI_ANY_ID &&
+ id->subdevice != pdev->subsystem_device)
+ continue;
+
+ return eeh_pe_reset_and_recover(pe);
+ }
+ }
+
+ ret = eeh_unfreeze_pe(pe);
+ if (!ret)
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED, true);
+ return ret;
+}
+
+/**
+ * eeh_dev_open - Increase count of pass through devices for PE
+ * @pdev: PCI device
+ *
+ * Increase count of passed through devices for the indicated
+ * PE. In the result, the EEH errors detected on the PE won't be
+ * reported. The PE owner will be responsible for detection
+ * and recovery.
+ */
+int eeh_dev_open(struct pci_dev *pdev)
+{
+ struct eeh_dev *edev;
+ int ret = -ENODEV;
+
+ mutex_lock(&eeh_dev_mutex);
+
+ /* No PCI device ? */
+ if (!pdev)
+ goto out;
+
+ /* No EEH device or PE ? */
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev || !edev->pe)
+ goto out;
+
+ /*
+ * The PE might have been put into frozen state, but we
+ * didn't detect that yet. The passed through PCI devices
+ * in frozen PE won't work properly. Clear the frozen state
+ * in advance.
+ */
+ ret = eeh_pe_change_owner(edev->pe);
+ if (ret)
+ goto out;
+
+ /* Increase PE's pass through count */
+ atomic_inc(&edev->pe->pass_dev_cnt);
+ mutex_unlock(&eeh_dev_mutex);
+
+ return 0;
+out:
+ mutex_unlock(&eeh_dev_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_dev_open);
+
+/**
+ * eeh_dev_release - Decrease count of pass through devices for PE
+ * @pdev: PCI device
+ *
+ * Decrease count of pass through devices for the indicated PE. If
+ * there is no passed through device in PE, the EEH errors detected
+ * on the PE will be reported and handled as usual.
+ */
+void eeh_dev_release(struct pci_dev *pdev)
+{
+ struct eeh_dev *edev;
+
+ mutex_lock(&eeh_dev_mutex);
+
+ /* No PCI device ? */
+ if (!pdev)
+ goto out;
+
+ /* No EEH device ? */
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev || !edev->pe || !eeh_pe_passed(edev->pe))
+ goto out;
+
+ /* Decrease PE's pass through count */
+ WARN_ON(atomic_dec_if_positive(&edev->pe->pass_dev_cnt) < 0);
+ eeh_pe_change_owner(edev->pe);
+out:
+ mutex_unlock(&eeh_dev_mutex);
+}
+EXPORT_SYMBOL(eeh_dev_release);
+
+#ifdef CONFIG_IOMMU_API
+
+static int dev_has_iommu_table(struct device *dev, void *data)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_dev **ppdev = data;
+
+ if (!dev)
+ return 0;
+
+ if (device_iommu_mapped(dev)) {
+ *ppdev = pdev;
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * eeh_iommu_group_to_pe - Convert IOMMU group to EEH PE
+ * @group: IOMMU group
+ *
+ * The routine is called to convert IOMMU group to EEH PE.
+ */
+struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group)
+{
+ struct pci_dev *pdev = NULL;
+ struct eeh_dev *edev;
+ int ret;
+
+ /* No IOMMU group ? */
+ if (!group)
+ return NULL;
+
+ ret = iommu_group_for_each_dev(group, &pdev, dev_has_iommu_table);
+ if (!ret || !pdev)
+ return NULL;
+
+ /* No EEH device or PE ? */
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev || !edev->pe)
+ return NULL;
+
+ return edev->pe;
+}
+EXPORT_SYMBOL_GPL(eeh_iommu_group_to_pe);
+
+#endif /* CONFIG_IOMMU_API */
+
+/**
+ * eeh_pe_set_option - Set options for the indicated PE
+ * @pe: EEH PE
+ * @option: requested option
+ *
+ * The routine is called to enable or disable EEH functionality
+ * on the indicated PE, to enable IO or DMA for the frozen PE.
+ */
+int eeh_pe_set_option(struct eeh_pe *pe, int option)
+{
+ int ret = 0;
+
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ /*
+ * EEH functionality could possibly be disabled, just
+ * return error for the case. And the EEH functionality
+ * isn't expected to be disabled on one specific PE.
+ */
+ switch (option) {
+ case EEH_OPT_ENABLE:
+ if (eeh_enabled()) {
+ ret = eeh_pe_change_owner(pe);
+ break;
+ }
+ ret = -EIO;
+ break;
+ case EEH_OPT_DISABLE:
+ break;
+ case EEH_OPT_THAW_MMIO:
+ case EEH_OPT_THAW_DMA:
+ case EEH_OPT_FREEZE_PE:
+ if (!eeh_ops || !eeh_ops->set_option) {
+ ret = -ENOENT;
+ break;
+ }
+
+ ret = eeh_pci_enable(pe, option);
+ break;
+ default:
+ pr_debug("%s: Option %d out of range (%d, %d)\n",
+ __func__, option, EEH_OPT_DISABLE, EEH_OPT_THAW_DMA);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_set_option);
+
+/**
+ * eeh_pe_get_state - Retrieve PE's state
+ * @pe: EEH PE
+ *
+ * Retrieve the PE's state, which includes 3 aspects: enabled
+ * DMA, enabled IO and asserted reset.
+ */
+int eeh_pe_get_state(struct eeh_pe *pe)
+{
+ int result, ret = 0;
+ bool rst_active, dma_en, mmio_en;
+
+ /* Existing PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ if (!eeh_ops || !eeh_ops->get_state)
+ return -ENOENT;
+
+ /*
+ * If the parent PE is owned by the host kernel and is undergoing
+ * error recovery, we should return the PE state as temporarily
+ * unavailable so that the error recovery on the guest is suspended
+ * until the recovery completes on the host.
+ */
+ if (pe->parent &&
+ !(pe->state & EEH_PE_REMOVED) &&
+ (pe->parent->state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING)))
+ return EEH_PE_STATE_UNAVAIL;
+
+ result = eeh_ops->get_state(pe, NULL);
+ rst_active = !!(result & EEH_STATE_RESET_ACTIVE);
+ dma_en = !!(result & EEH_STATE_DMA_ENABLED);
+ mmio_en = !!(result & EEH_STATE_MMIO_ENABLED);
+
+ if (rst_active)
+ ret = EEH_PE_STATE_RESET;
+ else if (dma_en && mmio_en)
+ ret = EEH_PE_STATE_NORMAL;
+ else if (!dma_en && !mmio_en)
+ ret = EEH_PE_STATE_STOPPED_IO_DMA;
+ else if (!dma_en && mmio_en)
+ ret = EEH_PE_STATE_STOPPED_DMA;
+ else
+ ret = EEH_PE_STATE_UNAVAIL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_get_state);
+
+static int eeh_pe_reenable_devices(struct eeh_pe *pe, bool include_passed)
+{
+ struct eeh_dev *edev, *tmp;
+ struct pci_dev *pdev;
+ int ret = 0;
+
+ eeh_pe_restore_bars(pe);
+
+ /*
+ * Reenable PCI devices as the devices passed
+ * through are always enabled before the reset.
+ */
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ continue;
+
+ ret = pci_reenable_device(pdev);
+ if (ret) {
+ pr_warn("%s: Failure %d reenabling %s\n",
+ __func__, ret, pci_name(pdev));
+ return ret;
+ }
+ }
+
+ /* The PE is still in frozen state */
+ if (include_passed || !eeh_pe_passed(pe)) {
+ ret = eeh_unfreeze_pe(pe);
+ } else
+ pr_info("EEH: Note: Leaving passthrough PHB#%x-PE#%x frozen.\n",
+ pe->phb->global_number, pe->addr);
+ if (!ret)
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED, include_passed);
+ return ret;
+}
+
+
+/**
+ * eeh_pe_reset - Issue PE reset according to specified type
+ * @pe: EEH PE
+ * @option: reset type
+ * @include_passed: include passed-through devices?
+ *
+ * The routine is called to reset the specified PE with the
+ * indicated type, either fundamental reset or hot reset.
+ * PE reset is the most important part for error recovery.
+ */
+int eeh_pe_reset(struct eeh_pe *pe, int option, bool include_passed)
+{
+ int ret = 0;
+
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ if (!eeh_ops || !eeh_ops->set_option || !eeh_ops->reset)
+ return -ENOENT;
+
+ switch (option) {
+ case EEH_RESET_DEACTIVATE:
+ ret = eeh_ops->reset(pe, option);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED, include_passed);
+ if (ret)
+ break;
+
+ ret = eeh_pe_reenable_devices(pe, include_passed);
+ break;
+ case EEH_RESET_HOT:
+ case EEH_RESET_FUNDAMENTAL:
+ /*
+ * Proactively freeze the PE to drop all MMIO access
+ * during reset, which should be banned as it's always
+ * cause recursive EEH error.
+ */
+ eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
+ ret = eeh_ops->reset(pe, option);
+ break;
+ default:
+ pr_debug("%s: Unsupported option %d\n",
+ __func__, option);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_reset);
+
+/**
+ * eeh_pe_configure - Configure PCI bridges after PE reset
+ * @pe: EEH PE
+ *
+ * The routine is called to restore the PCI config space for
+ * those PCI devices, especially PCI bridges affected by PE
+ * reset issued previously.
+ */
+int eeh_pe_configure(struct eeh_pe *pe)
+{
+ int ret = 0;
+
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_configure);
+
+/**
+ * eeh_pe_inject_err - Injecting the specified PCI error to the indicated PE
+ * @pe: the indicated PE
+ * @type: error type
+ * @func: error function
+ * @addr: address
+ * @mask: address mask
+ *
+ * The routine is called to inject the specified PCI error, which
+ * is determined by @type and @func, to the indicated PE for
+ * testing purpose.
+ */
+int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
+ unsigned long addr, unsigned long mask)
+{
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ /* Unsupported operation ? */
+ if (!eeh_ops || !eeh_ops->err_inject)
+ return -ENOENT;
+
+ /* Check on PCI error type */
+ if (type != EEH_ERR_TYPE_32 && type != EEH_ERR_TYPE_64)
+ return -EINVAL;
+
+ /* Check on PCI error function */
+ if (func < EEH_ERR_FUNC_MIN || func > EEH_ERR_FUNC_MAX)
+ return -EINVAL;
+
+ return eeh_ops->err_inject(pe, type, func, addr, mask);
+}
+EXPORT_SYMBOL_GPL(eeh_pe_inject_err);
+
+#ifdef CONFIG_PROC_FS
+static int proc_eeh_show(struct seq_file *m, void *v)
+{
+ if (!eeh_enabled()) {
+ seq_printf(m, "EEH Subsystem is globally disabled\n");
+ seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
+ } else {
+ seq_printf(m, "EEH Subsystem is enabled\n");
+ seq_printf(m,
+ "no device=%llu\n"
+ "no device node=%llu\n"
+ "no config address=%llu\n"
+ "check not wanted=%llu\n"
+ "eeh_total_mmio_ffs=%llu\n"
+ "eeh_false_positives=%llu\n"
+ "eeh_slot_resets=%llu\n",
+ eeh_stats.no_device,
+ eeh_stats.no_dn,
+ eeh_stats.no_cfg_addr,
+ eeh_stats.ignored_check,
+ eeh_stats.total_mmio_ffs,
+ eeh_stats.false_positives,
+ eeh_stats.slot_resets);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PROC_FS */
+
+#ifdef CONFIG_DEBUG_FS
+
+
+static struct pci_dev *eeh_debug_lookup_pdev(struct file *filp,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ uint32_t domain, bus, dev, fn;
+ struct pci_dev *pdev;
+ char buf[20];
+ int ret;
+
+ memset(buf, 0, sizeof(buf));
+ ret = simple_write_to_buffer(buf, sizeof(buf)-1, ppos, user_buf, count);
+ if (!ret)
+ return ERR_PTR(-EFAULT);
+
+ ret = sscanf(buf, "%x:%x:%x.%x", &domain, &bus, &dev, &fn);
+ if (ret != 4) {
+ pr_err("%s: expected 4 args, got %d\n", __func__, ret);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdev = pci_get_domain_bus_and_slot(domain, bus, (dev << 3) | fn);
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+
+ return pdev;
+}
+
+static int eeh_enable_dbgfs_set(void *data, u64 val)
+{
+ if (val)
+ eeh_clear_flag(EEH_FORCE_DISABLED);
+ else
+ eeh_add_flag(EEH_FORCE_DISABLED);
+
+ return 0;
+}
+
+static int eeh_enable_dbgfs_get(void *data, u64 *val)
+{
+ if (eeh_enabled())
+ *val = 0x1ul;
+ else
+ *val = 0x0ul;
+ return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(eeh_enable_dbgfs_ops, eeh_enable_dbgfs_get,
+ eeh_enable_dbgfs_set, "0x%llx\n");
+
+static ssize_t eeh_force_recover_write(struct file *filp,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pci_controller *hose;
+ uint32_t phbid, pe_no;
+ struct eeh_pe *pe;
+ char buf[20];
+ int ret;
+
+ ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
+ if (!ret)
+ return -EFAULT;
+
+ /*
+ * When PE is NULL the event is a "special" event. Rather than
+ * recovering a specific PE it forces the EEH core to scan for failed
+ * PHBs and recovers each. This needs to be done before any device
+ * recoveries can occur.
+ */
+ if (!strncmp(buf, "hwcheck", 7)) {
+ __eeh_send_failure_event(NULL);
+ return count;
+ }
+
+ ret = sscanf(buf, "%x:%x", &phbid, &pe_no);
+ if (ret != 2)
+ return -EINVAL;
+
+ hose = pci_find_controller_for_domain(phbid);
+ if (!hose)
+ return -ENODEV;
+
+ /* Retrieve PE */
+ pe = eeh_pe_get(hose, pe_no);
+ if (!pe)
+ return -ENODEV;
+
+ /*
+ * We don't do any state checking here since the detection
+ * process is async to the recovery process. The recovery
+ * thread *should* not break even if we schedule a recovery
+ * from an odd state (e.g. PE removed, or recovery of a
+ * non-isolated PE)
+ */
+ __eeh_send_failure_event(pe);
+
+ return ret < 0 ? ret : count;
+}
+
+static const struct file_operations eeh_force_recover_fops = {
+ .open = simple_open,
+ .llseek = no_llseek,
+ .write = eeh_force_recover_write,
+};
+
+static ssize_t eeh_debugfs_dev_usage(struct file *filp,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ static const char usage[] = "input format: <domain>:<bus>:<dev>.<fn>\n";
+
+ return simple_read_from_buffer(user_buf, count, ppos,
+ usage, sizeof(usage) - 1);
+}
+
+static ssize_t eeh_dev_check_write(struct file *filp,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pci_dev *pdev;
+ struct eeh_dev *edev;
+ int ret;
+
+ pdev = eeh_debug_lookup_pdev(filp, user_buf, count, ppos);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev) {
+ pci_err(pdev, "No eeh_dev for this device!\n");
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+
+ ret = eeh_dev_check_failure(edev);
+ pci_info(pdev, "eeh_dev_check_failure(%s) = %d\n",
+ pci_name(pdev), ret);
+
+ pci_dev_put(pdev);
+
+ return count;
+}
+
+static const struct file_operations eeh_dev_check_fops = {
+ .open = simple_open,
+ .llseek = no_llseek,
+ .write = eeh_dev_check_write,
+ .read = eeh_debugfs_dev_usage,
+};
+
+static int eeh_debugfs_break_device(struct pci_dev *pdev)
+{
+ struct resource *bar = NULL;
+ void __iomem *mapped;
+ u16 old, bit;
+ int i, pos;
+
+ /* Do we have an MMIO BAR to disable? */
+ for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+ struct resource *r = &pdev->resource[i];
+
+ if (!r->flags || !r->start)
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ continue;
+ if (r->flags & IORESOURCE_UNSET)
+ continue;
+
+ bar = r;
+ break;
+ }
+
+ if (!bar) {
+ pci_err(pdev, "Unable to find Memory BAR to cause EEH with\n");
+ return -ENXIO;
+ }
+
+ pci_err(pdev, "Going to break: %pR\n", bar);
+
+ if (pdev->is_virtfn) {
+#ifndef CONFIG_PCI_IOV
+ return -ENXIO;
+#else
+ /*
+ * VFs don't have a per-function COMMAND register, so the best
+ * we can do is clear the Memory Space Enable bit in the PF's
+ * SRIOV control reg.
+ *
+ * Unfortunately, this requires that we have a PF (i.e doesn't
+ * work for a passed-through VF) and it has the potential side
+ * effect of also causing an EEH on every other VF under the
+ * PF. Oh well.
+ */
+ pdev = pdev->physfn;
+ if (!pdev)
+ return -ENXIO; /* passed through VFs have no PF */
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+ pos += PCI_SRIOV_CTRL;
+ bit = PCI_SRIOV_CTRL_MSE;
+#endif /* !CONFIG_PCI_IOV */
+ } else {
+ bit = PCI_COMMAND_MEMORY;
+ pos = PCI_COMMAND;
+ }
+
+ /*
+ * Process here is:
+ *
+ * 1. Disable Memory space.
+ *
+ * 2. Perform an MMIO to the device. This should result in an error
+ * (CA / UR) being raised by the device which results in an EEH
+ * PE freeze. Using the in_8() accessor skips the eeh detection hook
+ * so the freeze hook so the EEH Detection machinery won't be
+ * triggered here. This is to match the usual behaviour of EEH
+ * where the HW will asynchronously freeze a PE and it's up to
+ * the kernel to notice and deal with it.
+ *
+ * 3. Turn Memory space back on. This is more important for VFs
+ * since recovery will probably fail if we don't. For normal
+ * the COMMAND register is reset as a part of re-initialising
+ * the device.
+ *
+ * Breaking stuff is the point so who cares if it's racy ;)
+ */
+ pci_read_config_word(pdev, pos, &old);
+
+ mapped = ioremap(bar->start, PAGE_SIZE);
+ if (!mapped) {
+ pci_err(pdev, "Unable to map MMIO BAR %pR\n", bar);
+ return -ENXIO;
+ }
+
+ pci_write_config_word(pdev, pos, old & ~bit);
+ in_8(mapped);
+ pci_write_config_word(pdev, pos, old);
+
+ iounmap(mapped);
+
+ return 0;
+}
+
+static ssize_t eeh_dev_break_write(struct file *filp,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pci_dev *pdev;
+ int ret;
+
+ pdev = eeh_debug_lookup_pdev(filp, user_buf, count, ppos);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ ret = eeh_debugfs_break_device(pdev);
+ pci_dev_put(pdev);
+
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static const struct file_operations eeh_dev_break_fops = {
+ .open = simple_open,
+ .llseek = no_llseek,
+ .write = eeh_dev_break_write,
+ .read = eeh_debugfs_dev_usage,
+};
+
+static ssize_t eeh_dev_can_recover(struct file *filp,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pci_driver *drv;
+ struct pci_dev *pdev;
+ size_t ret;
+
+ pdev = eeh_debug_lookup_pdev(filp, user_buf, count, ppos);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ /*
+ * In order for error recovery to work the driver needs to implement
+ * .error_detected(), so it can quiesce IO to the device, and
+ * .slot_reset() so it can re-initialise the device after a reset.
+ *
+ * Ideally they'd implement .resume() too, but some drivers which
+ * we need to support (notably IPR) don't so I guess we can tolerate
+ * that.
+ *
+ * .mmio_enabled() is mostly there as a work-around for devices which
+ * take forever to re-init after a hot reset. Implementing that is
+ * strictly optional.
+ */
+ drv = pci_dev_driver(pdev);
+ if (drv &&
+ drv->err_handler &&
+ drv->err_handler->error_detected &&
+ drv->err_handler->slot_reset) {
+ ret = count;
+ } else {
+ ret = -EOPNOTSUPP;
+ }
+
+ pci_dev_put(pdev);
+
+ return ret;
+}
+
+static const struct file_operations eeh_dev_can_recover_fops = {
+ .open = simple_open,
+ .llseek = no_llseek,
+ .write = eeh_dev_can_recover,
+ .read = eeh_debugfs_dev_usage,
+};
+
+#endif
+
+static int __init eeh_init_proc(void)
+{
+ if (machine_is(pseries) || machine_is(powernv)) {
+ proc_create_single("powerpc/eeh", 0, NULL, proc_eeh_show);
+#ifdef CONFIG_DEBUG_FS
+ debugfs_create_file_unsafe("eeh_enable", 0600,
+ arch_debugfs_dir, NULL,
+ &eeh_enable_dbgfs_ops);
+ debugfs_create_u32("eeh_max_freezes", 0600,
+ arch_debugfs_dir, &eeh_max_freezes);
+ debugfs_create_bool("eeh_disable_recovery", 0600,
+ arch_debugfs_dir,
+ &eeh_debugfs_no_recover);
+ debugfs_create_file_unsafe("eeh_dev_check", 0600,
+ arch_debugfs_dir, NULL,
+ &eeh_dev_check_fops);
+ debugfs_create_file_unsafe("eeh_dev_break", 0600,
+ arch_debugfs_dir, NULL,
+ &eeh_dev_break_fops);
+ debugfs_create_file_unsafe("eeh_force_recover", 0600,
+ arch_debugfs_dir, NULL,
+ &eeh_force_recover_fops);
+ debugfs_create_file_unsafe("eeh_dev_can_recover", 0600,
+ arch_debugfs_dir, NULL,
+ &eeh_dev_can_recover_fops);
+ eeh_cache_debugfs_init();
+#endif
+ }
+
+ return 0;
+}
+__initcall(eeh_init_proc);