Merging upstream version 6.1.82.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

19 files changed, 783 insertions, 905 deletions

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 15b7b403a..3965b2c9e 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -74,6 +74,11 @@ LDFLAGS_vmlinux += -z noexecstack
 ifeq ($(CONFIG_LD_IS_BFD),y)
 LDFLAGS_vmlinux += $(call ld-option,--no-warn-rwx-segments)
 endif
+ifeq ($(CONFIG_EFI_STUB),y)
+# ensure that the static EFI stub library will be pulled in, even if it is
+# never referenced explicitly from the startup code
+LDFLAGS_vmlinux += -u efi_pe_entry
+endif
 LDFLAGS_vmlinux += -T
 
 hostprogs	:= mkpiggy
@@ -100,7 +105,7 @@ vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
 ifdef CONFIG_X86_64
 	vmlinux-objs-y += $(obj)/ident_map_64.o
 	vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o
-	vmlinux-objs-y += $(obj)/mem_encrypt.o
+	vmlinux-objs-$(CONFIG_AMD_MEM_ENCRYPT) += $(obj)/mem_encrypt.o
 	vmlinux-objs-y += $(obj)/pgtable_64.o
 	vmlinux-objs-$(CONFIG_AMD_MEM_ENCRYPT) += $(obj)/sev.o
 endif
@@ -108,11 +113,11 @@ endif
 vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o
 vmlinux-objs-$(CONFIG_INTEL_TDX_GUEST) += $(obj)/tdx.o $(obj)/tdcall.o
 
-vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
 vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o
-efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a
+vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o
+vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
 
-$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE
+$(obj)/vmlinux: $(vmlinux-objs-y) FORCE
 	$(call if_changed,ld)
 
 OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
diff --git a/arch/x86/boot/compressed/acpi.c b/arch/x86/boot/compressed/acpi.c
index 9caf89063..55c98fdd6 100644
--- a/arch/x86/boot/compressed/acpi.c
+++ b/arch/x86/boot/compressed/acpi.c
@@ -30,13 +30,13 @@ __efi_get_rsdp_addr(unsigned long cfg_tbl_pa, unsigned int cfg_tbl_len)
 	 * Search EFI system tables for RSDP. Preferred is ACPI_20_TABLE_GUID to
 	 * ACPI_TABLE_GUID because it has more features.
 	 */
-	rsdp_addr = efi_find_vendor_table(boot_params, cfg_tbl_pa, cfg_tbl_len,
+	rsdp_addr = efi_find_vendor_table(boot_params_ptr, cfg_tbl_pa, cfg_tbl_len,
 					  ACPI_20_TABLE_GUID);
 	if (rsdp_addr)
 		return (acpi_physical_address)rsdp_addr;
 
 	/* No ACPI_20_TABLE_GUID found, fallback to ACPI_TABLE_GUID. */
-	rsdp_addr = efi_find_vendor_table(boot_params, cfg_tbl_pa, cfg_tbl_len,
+	rsdp_addr = efi_find_vendor_table(boot_params_ptr, cfg_tbl_pa, cfg_tbl_len,
 					  ACPI_TABLE_GUID);
 	if (rsdp_addr)
 		return (acpi_physical_address)rsdp_addr;
@@ -56,15 +56,15 @@ static acpi_physical_address efi_get_rsdp_addr(void)
 	enum efi_type et;
 	int ret;
 
-	et = efi_get_type(boot_params);
+	et = efi_get_type(boot_params_ptr);
 	if (et == EFI_TYPE_NONE)
 		return 0;
 
-	systab_pa = efi_get_system_table(boot_params);
+	systab_pa = efi_get_system_table(boot_params_ptr);
 	if (!systab_pa)
 		error("EFI support advertised, but unable to locate system table.");
 
-	ret = efi_get_conf_table(boot_params, &cfg_tbl_pa, &cfg_tbl_len);
+	ret = efi_get_conf_table(boot_params_ptr, &cfg_tbl_pa, &cfg_tbl_len);
 	if (ret || !cfg_tbl_pa)
 		error("EFI config table not found.");
 
@@ -156,7 +156,7 @@ acpi_physical_address get_rsdp_addr(void)
 {
 	acpi_physical_address pa;
 
-	pa = boot_params->acpi_rsdp_addr;
+	pa = boot_params_ptr->acpi_rsdp_addr;
 
 	if (!pa)
 		pa = efi_get_rsdp_addr();
@@ -210,7 +210,7 @@ static unsigned long get_acpi_srat_table(void)
 	rsdp = (struct acpi_table_rsdp *)get_cmdline_acpi_rsdp();
 	if (!rsdp)
 		rsdp = (struct acpi_table_rsdp *)(long)
-			boot_params->acpi_rsdp_addr;
+			boot_params_ptr->acpi_rsdp_addr;
 
 	if (!rsdp)
 		return 0;
diff --git a/arch/x86/boot/compressed/cmdline.c b/arch/x86/boot/compressed/cmdline.c
index f1add5d85..c1bb18097 100644
--- a/arch/x86/boot/compressed/cmdline.c
+++ b/arch/x86/boot/compressed/cmdline.c
@@ -14,9 +14,9 @@ static inline char rdfs8(addr_t addr)
 #include "../cmdline.c"
 unsigned long get_cmd_line_ptr(void)
 {
-	unsigned long cmd_line_ptr = boot_params->hdr.cmd_line_ptr;
+	unsigned long cmd_line_ptr = boot_params_ptr->hdr.cmd_line_ptr;
 
-	cmd_line_ptr |= (u64)boot_params->ext_cmd_line_ptr << 32;
+	cmd_line_ptr |= (u64)boot_params_ptr->ext_cmd_line_ptr << 32;
 
 	return cmd_line_ptr;
 }
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
new file mode 100644
index 000000000..8232c5b2a
--- /dev/null
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT and IDT before we make EFI service
+ * calls.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identity
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+	.code64
+	.text
+/*
+ * When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode()
+ * is the first thing that runs after switching to long mode. Depending on
+ * whether the EFI handover protocol or the compat entry point was used to
+ * enter the kernel, it will either branch to the common 64-bit EFI stub
+ * entrypoint efi_stub_entry() directly, or via the 64-bit EFI PE/COFF
+ * entrypoint efi_pe_entry(). In the former case, the bootloader must provide a
+ * struct bootparams pointer as the third argument, so the presence of such a
+ * pointer is used to disambiguate.
+ *
+ *                                                             +--------------+
+ *  +------------------+     +------------+            +------>| efi_pe_entry |
+ *  | efi32_pe_entry   |---->|            |            |       +-----------+--+
+ *  +------------------+     |            |     +------+----------------+  |
+ *                           | startup_32 |---->| startup_64_mixed_mode |  |
+ *  +------------------+     |            |     +------+----------------+  |
+ *  | efi32_stub_entry |---->|            |            |                   |
+ *  +------------------+     +------------+            |                   |
+ *                                                     V                   |
+ *                           +------------+     +----------------+         |
+ *                           | startup_64 |<----| efi_stub_entry |<--------+
+ *                           +------------+     +----------------+
+ */
+SYM_FUNC_START(startup_64_mixed_mode)
+	lea	efi32_boot_args(%rip), %rdx
+	mov	0(%rdx), %edi
+	mov	4(%rdx), %esi
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+	mov	8(%rdx), %edx		// saved bootparams pointer
+	test	%edx, %edx
+	jnz	efi_stub_entry
+#endif
+	/*
+	 * efi_pe_entry uses MS calling convention, which requires 32 bytes of
+	 * shadow space on the stack even if all arguments are passed in
+	 * registers. We also need an additional 8 bytes for the space that
+	 * would be occupied by the return address, and this also results in
+	 * the correct stack alignment for entry.
+	 */
+	sub	$40, %rsp
+	mov	%rdi, %rcx		// MS calling convention
+	mov	%rsi, %rdx
+	jmp	efi_pe_entry
+SYM_FUNC_END(startup_64_mixed_mode)
+
+SYM_FUNC_START(__efi64_thunk)
+	push	%rbp
+	push	%rbx
+
+	movl	%ds, %eax
+	push	%rax
+	movl	%es, %eax
+	push	%rax
+	movl	%ss, %eax
+	push	%rax
+
+	/* Copy args passed on stack */
+	movq	0x30(%rsp), %rbp
+	movq	0x38(%rsp), %rbx
+	movq	0x40(%rsp), %rax
+
+	/*
+	 * Convert x86-64 ABI params to i386 ABI
+	 */
+	subq	$64, %rsp
+	movl	%esi, 0x0(%rsp)
+	movl	%edx, 0x4(%rsp)
+	movl	%ecx, 0x8(%rsp)
+	movl	%r8d, 0xc(%rsp)
+	movl	%r9d, 0x10(%rsp)
+	movl	%ebp, 0x14(%rsp)
+	movl	%ebx, 0x18(%rsp)
+	movl	%eax, 0x1c(%rsp)
+
+	leaq	0x20(%rsp), %rbx
+	sgdt	(%rbx)
+	sidt	16(%rbx)
+
+	leaq	1f(%rip), %rbp
+
+	/*
+	 * Switch to IDT and GDT with 32-bit segments. These are the firmware
+	 * GDT and IDT that were installed when the kernel started executing.
+	 * The pointers were saved by the efi32_entry() routine below.
+	 *
+	 * Pass the saved DS selector to the 32-bit code, and use far return to
+	 * restore the saved CS selector.
+	 */
+	lidt	efi32_boot_idt(%rip)
+	lgdt	efi32_boot_gdt(%rip)
+
+	movzwl	efi32_boot_ds(%rip), %edx
+	movzwq	efi32_boot_cs(%rip), %rax
+	pushq	%rax
+	leaq	efi_enter32(%rip), %rax
+	pushq	%rax
+	lretq
+
+1:	addq	$64, %rsp
+	movq	%rdi, %rax
+
+	pop	%rbx
+	movl	%ebx, %ss
+	pop	%rbx
+	movl	%ebx, %es
+	pop	%rbx
+	movl	%ebx, %ds
+	/* Clear out 32-bit selector from FS and GS */
+	xorl	%ebx, %ebx
+	movl	%ebx, %fs
+	movl	%ebx, %gs
+
+	/*
+	 * Convert 32-bit status code into 64-bit.
+	 */
+	roll	$1, %eax
+	rorq	$1, %rax
+
+	pop	%rbx
+	pop	%rbp
+	RET
+SYM_FUNC_END(__efi64_thunk)
+
+	.code32
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+SYM_FUNC_START(efi32_stub_entry)
+	call	1f
+1:	popl	%ecx
+
+	/* Clear BSS */
+	xorl	%eax, %eax
+	leal	(_bss - 1b)(%ecx), %edi
+	leal	(_ebss - 1b)(%ecx), %ecx
+	subl	%edi, %ecx
+	shrl	$2, %ecx
+	cld
+	rep	stosl
+
+	add	$0x4, %esp		/* Discard return address */
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	jmp	efi32_entry
+SYM_FUNC_END(efi32_stub_entry)
+#endif
+
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+SYM_FUNC_START_LOCAL(efi_enter32)
+	/* Load firmware selector into data and stack segment registers */
+	movl	%edx, %ds
+	movl	%edx, %es
+	movl	%edx, %fs
+	movl	%edx, %gs
+	movl	%edx, %ss
+
+	/* Reload pgtables */
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	/* Disable long mode via EFER */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btrl	$_EFER_LME, %eax
+	wrmsr
+
+	call	*%edi
+
+	/* We must preserve return value */
+	movl	%eax, %edi
+
+	/*
+	 * Some firmware will return with interrupts enabled. Be sure to
+	 * disable them before we switch GDTs and IDTs.
+	 */
+	cli
+
+	lidtl	16(%ebx)
+	lgdtl	(%ebx)
+
+	movl	%cr4, %eax
+	btsl	$(X86_CR4_PAE_BIT), %eax
+	movl	%eax, %cr4
+
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+
+	xorl	%eax, %eax
+	lldt	%ax
+
+	pushl	$__KERNEL_CS
+	pushl	%ebp
+
+	/* Enable paging */
+	movl	%cr0, %eax
+	btsl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+	lret
+SYM_FUNC_END(efi_enter32)
+
+/*
+ * This is the common EFI stub entry point for mixed mode.
+ *
+ * Arguments:	%ecx	image handle
+ * 		%edx	EFI system table pointer
+ *		%esi	struct bootparams pointer (or NULL when not using
+ *			the EFI handover protocol)
+ *
+ * Since this is the point of no return for ordinary execution, no registers
+ * are considered live except for the function parameters. [Note that the EFI
+ * stub may still exit and return to the firmware using the Exit() EFI boot
+ * service.]
+ */
+SYM_FUNC_START_LOCAL(efi32_entry)
+	call	1f
+1:	pop	%ebx
+
+	/* Save firmware GDTR and code/data selectors */
+	sgdtl	(efi32_boot_gdt - 1b)(%ebx)
+	movw	%cs, (efi32_boot_cs - 1b)(%ebx)
+	movw	%ds, (efi32_boot_ds - 1b)(%ebx)
+
+	/* Store firmware IDT descriptor */
+	sidtl	(efi32_boot_idt - 1b)(%ebx)
+
+	/* Store boot arguments */
+	leal	(efi32_boot_args - 1b)(%ebx), %ebx
+	movl	%ecx, 0(%ebx)
+	movl	%edx, 4(%ebx)
+	movl	%esi, 8(%ebx)
+	movb	$0x0, 12(%ebx)          // efi_is64
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	jmp	startup_32
+SYM_FUNC_END(efi32_entry)
+
+/*
+ * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
+ *			       efi_system_table_32_t *sys_table)
+ */
+SYM_FUNC_START(efi32_pe_entry)
+	pushl	%ebp
+	movl	%esp, %ebp
+	pushl	%ebx				// save callee-save registers
+	pushl	%edi
+
+	call	verify_cpu			// check for long mode support
+	testl	%eax, %eax
+	movl	$0x80000003, %eax		// EFI_UNSUPPORTED
+	jnz	2f
+
+	movl	8(%ebp), %ecx			// image_handle
+	movl	12(%ebp), %edx			// sys_table
+	xorl	%esi, %esi
+	jmp	efi32_entry			// pass %ecx, %edx, %esi
+						// no other registers remain live
+
+2:	popl	%edi				// restore callee-save registers
+	popl	%ebx
+	leave
+	RET
+SYM_FUNC_END(efi32_pe_entry)
+
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+	.org	efi32_stub_entry + 0x200
+	.code64
+SYM_FUNC_START_NOALIGN(efi64_stub_entry)
+	jmp	efi_handover_entry
+SYM_FUNC_END(efi64_stub_entry)
+#endif
+
+	.data
+	.balign	8
+SYM_DATA_START_LOCAL(efi32_boot_gdt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_gdt)
+
+SYM_DATA_START_LOCAL(efi32_boot_idt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_idt)
+
+SYM_DATA_LOCAL(efi32_boot_cs, .word 0)
+SYM_DATA_LOCAL(efi32_boot_ds, .word 0)
+SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
+SYM_DATA(efi_is64, .byte 1)
diff --git a/arch/x86/boot/compressed/efi_thunk_64.S b/arch/x86/boot/compressed/efi_thunk_64.S
deleted file mode 100644
index 67e7edcdf..000000000
--- a/arch/x86/boot/compressed/efi_thunk_64.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
- *
- * Early support for invoking 32-bit EFI services from a 64-bit kernel.
- *
- * Because this thunking occurs before ExitBootServices() we have to
- * restore the firmware's 32-bit GDT and IDT before we make EFI service
- * calls.
- *
- * On the plus side, we don't have to worry about mangling 64-bit
- * addresses into 32-bits because we're executing with an identity
- * mapped pagetable and haven't transitioned to 64-bit virtual addresses
- * yet.
- */
-
-#include <linux/linkage.h>
-#include <asm/msr.h>
-#include <asm/page_types.h>
-#include <asm/processor-flags.h>
-#include <asm/segment.h>
-
-	.code64
-	.text
-SYM_FUNC_START(__efi64_thunk)
-	push	%rbp
-	push	%rbx
-
-	movl	%ds, %eax
-	push	%rax
-	movl	%es, %eax
-	push	%rax
-	movl	%ss, %eax
-	push	%rax
-
-	/* Copy args passed on stack */
-	movq	0x30(%rsp), %rbp
-	movq	0x38(%rsp), %rbx
-	movq	0x40(%rsp), %rax
-
-	/*
-	 * Convert x86-64 ABI params to i386 ABI
-	 */
-	subq	$64, %rsp
-	movl	%esi, 0x0(%rsp)
-	movl	%edx, 0x4(%rsp)
-	movl	%ecx, 0x8(%rsp)
-	movl	%r8d, 0xc(%rsp)
-	movl	%r9d, 0x10(%rsp)
-	movl	%ebp, 0x14(%rsp)
-	movl	%ebx, 0x18(%rsp)
-	movl	%eax, 0x1c(%rsp)
-
-	leaq	0x20(%rsp), %rbx
-	sgdt	(%rbx)
-
-	addq	$16, %rbx
-	sidt	(%rbx)
-
-	leaq	1f(%rip), %rbp
-
-	/*
-	 * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
-	 * and IDT that was installed when the kernel started executing. The
-	 * pointers were saved at the EFI stub entry point in head_64.S.
-	 *
-	 * Pass the saved DS selector to the 32-bit code, and use far return to
-	 * restore the saved CS selector.
-	 */
-	leaq	efi32_boot_idt(%rip), %rax
-	lidt	(%rax)
-	leaq	efi32_boot_gdt(%rip), %rax
-	lgdt	(%rax)
-
-	movzwl	efi32_boot_ds(%rip), %edx
-	movzwq	efi32_boot_cs(%rip), %rax
-	pushq	%rax
-	leaq	efi_enter32(%rip), %rax
-	pushq	%rax
-	lretq
-
-1:	addq	$64, %rsp
-	movq	%rdi, %rax
-
-	pop	%rbx
-	movl	%ebx, %ss
-	pop	%rbx
-	movl	%ebx, %es
-	pop	%rbx
-	movl	%ebx, %ds
-	/* Clear out 32-bit selector from FS and GS */
-	xorl	%ebx, %ebx
-	movl	%ebx, %fs
-	movl	%ebx, %gs
-
-	/*
-	 * Convert 32-bit status code into 64-bit.
-	 */
-	roll	$1, %eax
-	rorq	$1, %rax
-
-	pop	%rbx
-	pop	%rbp
-	RET
-SYM_FUNC_END(__efi64_thunk)
-
-	.code32
-/*
- * EFI service pointer must be in %edi.
- *
- * The stack should represent the 32-bit calling convention.
- */
-SYM_FUNC_START_LOCAL(efi_enter32)
-	/* Load firmware selector into data and stack segment registers */
-	movl	%edx, %ds
-	movl	%edx, %es
-	movl	%edx, %fs
-	movl	%edx, %gs
-	movl	%edx, %ss
-
-	/* Reload pgtables */
-	movl	%cr3, %eax
-	movl	%eax, %cr3
-
-	/* Disable paging */
-	movl	%cr0, %eax
-	btrl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-
-	/* Disable long mode via EFER */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btrl	$_EFER_LME, %eax
-	wrmsr
-
-	call	*%edi
-
-	/* We must preserve return value */
-	movl	%eax, %edi
-
-	/*
-	 * Some firmware will return with interrupts enabled. Be sure to
-	 * disable them before we switch GDTs and IDTs.
-	 */
-	cli
-
-	lidtl	(%ebx)
-	subl	$16, %ebx
-
-	lgdtl	(%ebx)
-
-	movl	%cr4, %eax
-	btsl	$(X86_CR4_PAE_BIT), %eax
-	movl	%eax, %cr4
-
-	movl	%cr3, %eax
-	movl	%eax, %cr3
-
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btsl	$_EFER_LME, %eax
-	wrmsr
-
-	xorl	%eax, %eax
-	lldt	%ax
-
-	pushl	$__KERNEL_CS
-	pushl	%ebp
-
-	/* Enable paging */
-	movl	%cr0, %eax
-	btsl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-	lret
-SYM_FUNC_END(efi_enter32)
-
-	.data
-	.balign	8
-SYM_DATA_START(efi32_boot_gdt)
-	.word	0
-	.quad	0
-SYM_DATA_END(efi32_boot_gdt)
-
-SYM_DATA_START(efi32_boot_idt)
-	.word	0
-	.quad	0
-SYM_DATA_END(efi32_boot_idt)
-
-SYM_DATA_START(efi32_boot_cs)
-	.word	0
-SYM_DATA_END(efi32_boot_cs)
-
-SYM_DATA_START(efi32_boot_ds)
-	.word	0
-SYM_DATA_END(efi32_boot_ds)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 3b354eb95..1cfe9802a 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -84,19 +84,6 @@ SYM_FUNC_START(startup_32)
 
 #ifdef CONFIG_RELOCATABLE
 	leal	startup_32@GOTOFF(%edx), %ebx
-
-#ifdef CONFIG_EFI_STUB
-/*
- * If we were loaded via the EFI LoadImage service, startup_32() will be at an
- * offset to the start of the space allocated for the image. efi_pe_entry() will
- * set up image_offset to tell us where the image actually starts, so that we
- * can use the full available buffer.
- *	image_offset = startup_32 - image_base
- * Otherwise image_offset will be zero and has no effect on the calculations.
- */
-	subl    image_offset@GOTOFF(%edx), %ebx
-#endif
-
 	movl	BP_kernel_alignment(%esi), %eax
 	decl	%eax
 	addl    %eax, %ebx
@@ -150,17 +137,6 @@ SYM_FUNC_START(startup_32)
 	jmp	*%eax
 SYM_FUNC_END(startup_32)
 
-#ifdef CONFIG_EFI_STUB
-SYM_FUNC_START(efi32_stub_entry)
-	add	$0x4, %esp
-	movl	8(%esp), %esi	/* save boot_params pointer */
-	call	efi_main
-	/* efi_main returns the possibly relocated address of startup_32 */
-	jmp	*%eax
-SYM_FUNC_END(efi32_stub_entry)
-SYM_FUNC_ALIAS(efi_stub_entry, efi32_stub_entry)
-#endif
-
 	.text
 SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
@@ -179,15 +155,9 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
  */
 	/* push arguments for extract_kernel: */
 
-	pushl	output_len@GOTOFF(%ebx)	/* decompressed length, end of relocs */
 	pushl	%ebp			/* output address */
-	pushl	input_len@GOTOFF(%ebx)	/* input_len */
-	leal	input_data@GOTOFF(%ebx), %eax
-	pushl	%eax			/* input_data */
-	leal	boot_heap@GOTOFF(%ebx), %eax
-	pushl	%eax			/* heap area */
 	pushl	%esi			/* real mode pointer */
-	call	extract_kernel		/* returns kernel location in %eax */
+	call	extract_kernel		/* returns kernel entry point in %eax */
 	addl	$24, %esp
 
 /*
@@ -208,17 +178,11 @@ SYM_DATA_START_LOCAL(gdt)
 	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
 SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
 
-#ifdef CONFIG_EFI_STUB
-SYM_DATA(image_offset, .long 0)
-#endif
-
 /*
  * Stack and heap for uncompression
  */
 	.bss
 	.balign 4
-boot_heap:
-	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:
 	.fill BOOT_STACK_SIZE, 1, 0
 boot_stack_end:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index b4bd6df29..0d7aef10b 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -118,7 +118,9 @@ SYM_FUNC_START(startup_32)
 1:
 
 	/* Setup Exception handling for SEV-ES */
+#ifdef CONFIG_AMD_MEM_ENCRYPT
 	call	startup32_load_idt
+#endif
 
 	/* Make sure cpu supports long mode. */
 	call	verify_cpu
@@ -136,19 +138,6 @@ SYM_FUNC_START(startup_32)
 
 #ifdef CONFIG_RELOCATABLE
 	movl	%ebp, %ebx
-
-#ifdef CONFIG_EFI_STUB
-/*
- * If we were loaded via the EFI LoadImage service, startup_32 will be at an
- * offset to the start of the space allocated for the image. efi_pe_entry will
- * set up image_offset to tell us where the image actually starts, so that we
- * can use the full available buffer.
- *	image_offset = startup_32 - image_base
- * Otherwise image_offset will be zero and has no effect on the calculations.
- */
-	subl    rva(image_offset)(%ebp), %ebx
-#endif
-
 	movl	BP_kernel_alignment(%esi), %eax
 	decl	%eax
 	addl	%eax, %ebx
@@ -178,12 +167,13 @@ SYM_FUNC_START(startup_32)
   */
 	/*
 	 * If SEV is active then set the encryption mask in the page tables.
-	 * This will insure that when the kernel is copied and decompressed
+	 * This will ensure that when the kernel is copied and decompressed
 	 * it will be done so encrypted.
 	 */
-	call	get_sev_encryption_bit
 	xorl	%edx, %edx
 #ifdef	CONFIG_AMD_MEM_ENCRYPT
+	call	get_sev_encryption_bit
+	xorl	%edx, %edx
 	testl	%eax, %eax
 	jz	1f
 	subl	$32, %eax	/* Encryption bit is always above bit 31 */
@@ -249,6 +239,11 @@ SYM_FUNC_START(startup_32)
 	movl    $__BOOT_TSS, %eax
 	ltr	%ax
 
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+	/* Check if the C-bit position is correct when SEV is active */
+	call	startup32_check_sev_cbit
+#endif
+
 	/*
 	 * Setup for the jump to 64bit mode
 	 *
@@ -261,29 +256,11 @@ SYM_FUNC_START(startup_32)
 	 */
 	leal	rva(startup_64)(%ebp), %eax
 #ifdef CONFIG_EFI_MIXED
-	movl	rva(efi32_boot_args)(%ebp), %edi
-	testl	%edi, %edi
-	jz	1f
-	leal	rva(efi64_stub_entry)(%ebp), %eax
-	movl	rva(efi32_boot_args+4)(%ebp), %esi
-	movl	rva(efi32_boot_args+8)(%ebp), %edx	// saved bootparams pointer
-	testl	%edx, %edx
-	jnz	1f
-	/*
-	 * efi_pe_entry uses MS calling convention, which requires 32 bytes of
-	 * shadow space on the stack even if all arguments are passed in
-	 * registers. We also need an additional 8 bytes for the space that
-	 * would be occupied by the return address, and this also results in
-	 * the correct stack alignment for entry.
-	 */
-	subl	$40, %esp
-	leal	rva(efi_pe_entry)(%ebp), %eax
-	movl	%edi, %ecx			// MS calling convention
-	movl	%esi, %edx
+	cmpb	$1, rva(efi_is64)(%ebp)
+	je	1f
+	leal	rva(startup_64_mixed_mode)(%ebp), %eax
 1:
 #endif
-	/* Check if the C-bit position is correct when SEV is active */
-	call	startup32_check_sev_cbit
 
 	pushl	$__KERNEL_CS
 	pushl	%eax
@@ -296,41 +273,6 @@ SYM_FUNC_START(startup_32)
 	lret
 SYM_FUNC_END(startup_32)
 
-#ifdef CONFIG_EFI_MIXED
-	.org 0x190
-SYM_FUNC_START(efi32_stub_entry)
-	add	$0x4, %esp		/* Discard return address */
-	popl	%ecx
-	popl	%edx
-	popl	%esi
-
-	call	1f
-1:	pop	%ebp
-	subl	$ rva(1b), %ebp
-
-	movl	%esi, rva(efi32_boot_args+8)(%ebp)
-SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL)
-	movl	%ecx, rva(efi32_boot_args)(%ebp)
-	movl	%edx, rva(efi32_boot_args+4)(%ebp)
-	movb	$0, rva(efi_is64)(%ebp)
-
-	/* Save firmware GDTR and code/data selectors */
-	sgdtl	rva(efi32_boot_gdt)(%ebp)
-	movw	%cs, rva(efi32_boot_cs)(%ebp)
-	movw	%ds, rva(efi32_boot_ds)(%ebp)
-
-	/* Store firmware IDT descriptor */
-	sidtl	rva(efi32_boot_idt)(%ebp)
-
-	/* Disable paging */
-	movl	%cr0, %eax
-	btrl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-
-	jmp	startup_32
-SYM_FUNC_END(efi32_stub_entry)
-#endif
-
 	.code64
 	.org 0x200
 SYM_CODE_START(startup_64)
@@ -372,20 +314,6 @@ SYM_CODE_START(startup_64)
 	/* Start with the delta to where the kernel will run at. */
 #ifdef CONFIG_RELOCATABLE
 	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
-
-#ifdef CONFIG_EFI_STUB
-/*
- * If we were loaded via the EFI LoadImage service, startup_32 will be at an
- * offset to the start of the space allocated for the image. efi_pe_entry will
- * set up image_offset to tell us where the image actually starts, so that we
- * can use the full available buffer.
- *	image_offset = startup_32 - image_base
- * Otherwise image_offset will be zero and has no effect on the calculations.
- */
-	movl    image_offset(%rip), %eax
-	subq	%rax, %rbp
-#endif
-
 	movl	BP_kernel_alignment(%rsi), %eax
 	decl	%eax
 	addq	%rax, %rbp
@@ -424,10 +352,6 @@ SYM_CODE_START(startup_64)
 	 * For the trampoline, we need the top page table to reside in lower
 	 * memory as we don't have a way to load 64-bit values into CR3 in
 	 * 32-bit mode.
-	 *
-	 * We go though the trampoline even if we don't have to: if we're
-	 * already in a desired paging mode. This way the trampoline code gets
-	 * tested on every boot.
 	 */
 
 	/* Make sure we have GDT with 32-bit code segment */
@@ -442,10 +366,14 @@ SYM_CODE_START(startup_64)
 	lretq
 
 .Lon_kernel_cs:
+	/*
+	 * RSI holds a pointer to a boot_params structure provided by the
+	 * loader, and this needs to be preserved across C function calls. So
+	 * move it into a callee saved register.
+	 */
+	movq	%rsi, %r15
 
-	pushq	%rsi
 	call	load_stage1_idt
-	popq	%rsi
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	/*
@@ -456,82 +384,24 @@ SYM_CODE_START(startup_64)
 	 * CPUID instructions being issued, so go ahead and do that now via
 	 * sev_enable(), which will also handle the rest of the SEV-related
 	 * detection/setup to ensure that has been done in advance of any dependent
-	 * code.
+	 * code. Pass the boot_params pointer as the first argument.
 	 */
-	pushq	%rsi
-	movq	%rsi, %rdi		/* real mode address */
+	movq	%r15, %rdi
 	call	sev_enable
-	popq	%rsi
 #endif
 
 	/*
-	 * paging_prepare() sets up the trampoline and checks if we need to
-	 * enable 5-level paging.
-	 *
-	 * paging_prepare() returns a two-quadword structure which lands
-	 * into RDX:RAX:
-	 *   - Address of the trampoline is returned in RAX.
-	 *   - Non zero RDX means trampoline needs to enable 5-level
-	 *     paging.
-	 *
-	 * RSI holds real mode data and needs to be preserved across
-	 * this function call.
-	 */
-	pushq	%rsi
-	movq	%rsi, %rdi		/* real mode address */
-	call	paging_prepare
-	popq	%rsi
-
-	/* Save the trampoline address in RCX */
-	movq	%rax, %rcx
-
-	/* Set up 32-bit addressable stack */
-	leaq	TRAMPOLINE_32BIT_STACK_END(%rcx), %rsp
-
-	/*
-	 * Preserve live 64-bit registers on the stack: this is necessary
-	 * because the architecture does not guarantee that GPRs will retain
-	 * their full 64-bit values across a 32-bit mode switch.
-	 */
-	pushq	%rbp
-	pushq	%rbx
-	pushq	%rsi
-
-	/*
-	 * Push the 64-bit address of trampoline_return() onto the new stack.
-	 * It will be used by the trampoline to return to the main code. Due to
-	 * the 32-bit mode switch, it cannot be kept it in a register either.
-	 */
-	leaq	trampoline_return(%rip), %rdi
-	pushq	%rdi
-
-	/* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */
-	pushq	$__KERNEL32_CS
-	leaq	TRAMPOLINE_32BIT_CODE_OFFSET(%rax), %rax
-	pushq	%rax
-	lretq
-trampoline_return:
-	/* Restore live 64-bit registers */
-	popq	%rsi
-	popq	%rbx
-	popq	%rbp
-
-	/* Restore the stack, the 32-bit trampoline uses its own stack */
-	leaq	rva(boot_stack_end)(%rbx), %rsp
-
-	/*
-	 * cleanup_trampoline() would restore trampoline memory.
-	 *
-	 * RDI is address of the page table to use instead of page table
-	 * in trampoline memory (if required).
+	 * configure_5level_paging() updates the number of paging levels using
+	 * a trampoline in 32-bit addressable memory if the current number does
+	 * not match the desired number.
 	 *
-	 * RSI holds real mode data and needs to be preserved across
-	 * this function call.
+	 * Pass the boot_params pointer as the first argument. The second
+	 * argument is the relocated address of the page table to use instead
+	 * of the page table in trampoline memory (if required).
 	 */
-	pushq	%rsi
-	leaq	rva(top_pgtable)(%rbx), %rdi
-	call	cleanup_trampoline
-	popq	%rsi
+	movq	%r15, %rdi
+	leaq	rva(top_pgtable)(%rbx), %rsi
+	call	configure_5level_paging
 
 	/* Zero EFLAGS */
 	pushq	$0
@@ -541,7 +411,6 @@ trampoline_return:
  * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	pushq	%rsi
 	leaq	(_bss-8)(%rip), %rsi
 	leaq	rva(_bss-8)(%rbx), %rdi
 	movl	$(_bss - startup_32), %ecx
@@ -549,7 +418,6 @@ trampoline_return:
 	std
 	rep	movsq
 	cld
-	popq	%rsi
 
 	/*
 	 * The GDT may get overwritten either during the copy we just did or
@@ -568,19 +436,6 @@ trampoline_return:
 	jmp	*%rax
 SYM_CODE_END(startup_64)
 
-#ifdef CONFIG_EFI_STUB
-	.org 0x390
-SYM_FUNC_START(efi64_stub_entry)
-	and	$~0xf, %rsp			/* realign the stack */
-	movq	%rdx, %rbx			/* save boot_params pointer */
-	call	efi_main
-	movq	%rbx,%rsi
-	leaq	rva(startup_64)(%rax), %rax
-	jmp	*%rax
-SYM_FUNC_END(efi64_stub_entry)
-SYM_FUNC_ALIAS(efi_stub_entry, efi64_stub_entry)
-#endif
-
 	.text
 SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
@@ -594,125 +449,122 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 	shrq	$3, %rcx
 	rep	stosq
 
-	pushq	%rsi
 	call	load_stage2_idt
 
 	/* Pass boot_params to initialize_identity_maps() */
-	movq	(%rsp), %rdi
+	movq	%r15, %rdi
 	call	initialize_identity_maps
-	popq	%rsi
 
 /*
  * Do the extraction, and jump to the new kernel..
  */
-	pushq	%rsi			/* Save the real mode argument */
-	movq	%rsi, %rdi		/* real mode address */
-	leaq	boot_heap(%rip), %rsi	/* malloc area for uncompression */
-	leaq	input_data(%rip), %rdx  /* input_data */
-	movl	input_len(%rip), %ecx	/* input_len */
-	movq	%rbp, %r8		/* output target address */
-	movl	output_len(%rip), %r9d	/* decompressed length, end of relocs */
-	call	extract_kernel		/* returns kernel location in %rax */
-	popq	%rsi
+	/* pass struct boot_params pointer and output target address */
+	movq	%r15, %rdi
+	movq	%rbp, %rsi
+	call	extract_kernel		/* returns kernel entry point in %rax */
 
 /*
  * Jump to the decompressed kernel.
  */
+	movq	%r15, %rsi
 	jmp	*%rax
 SYM_FUNC_END(.Lrelocated)
 
-	.code32
 /*
- * This is the 32-bit trampoline that will be copied over to low memory.
+ * This is the 32-bit trampoline that will be copied over to low memory. It
+ * will be called using the ordinary 64-bit calling convention from code
+ * running in 64-bit mode.
  *
  * Return address is at the top of the stack (might be above 4G).
- * ECX contains the base address of the trampoline memory.
- * Non zero RDX means trampoline needs to enable 5-level paging.
+ * The first argument (EDI) contains the address of the temporary PGD level
+ * page table in 32-bit addressable memory which will be programmed into
+ * register CR3.
  */
+	.section ".rodata", "a", @progbits
 SYM_CODE_START(trampoline_32bit_src)
-	/* Set up data and stack segments */
-	movl	$__KERNEL_DS, %eax
-	movl	%eax, %ds
-	movl	%eax, %ss
+	/*
+	 * Preserve callee save 64-bit registers on the stack: this is
+	 * necessary because the architecture does not guarantee that GPRs will
+	 * retain their full 64-bit values across a 32-bit mode switch.
+	 */
+	pushq	%r15
+	pushq	%r14
+	pushq	%r13
+	pushq	%r12
+	pushq	%rbp
+	pushq	%rbx
+
+	/* Preserve top half of RSP in a legacy mode GPR to avoid truncation */
+	movq	%rsp, %rbx
+	shrq	$32, %rbx
 
+	/* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */
+	pushq	$__KERNEL32_CS
+	leaq	0f(%rip), %rax
+	pushq	%rax
+	lretq
+
+	/*
+	 * The 32-bit code below will do a far jump back to long mode and end
+	 * up here after reconfiguring the number of paging levels. First, the
+	 * stack pointer needs to be restored to its full 64-bit value before
+	 * the callee save register contents can be popped from the stack.
+	 */
+.Lret:
+	shlq	$32, %rbx
+	orq	%rbx, %rsp
+
+	/* Restore the preserved 64-bit registers */
+	popq	%rbx
+	popq	%rbp
+	popq	%r12
+	popq	%r13
+	popq	%r14
+	popq	%r15
+	retq
+
+	.code32
+0:
 	/* Disable paging */
 	movl	%cr0, %eax
 	btrl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 
-	/* Check what paging mode we want to be in after the trampoline */
-	testl	%edx, %edx
-	jz	1f
-
-	/* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */
-	movl	%cr4, %eax
-	testl	$X86_CR4_LA57, %eax
-	jnz	3f
-	jmp	2f
-1:
-	/* We want 4-level paging: don't touch CR3 if it already points to 4-level page tables */
-	movl	%cr4, %eax
-	testl	$X86_CR4_LA57, %eax
-	jz	3f
-2:
 	/* Point CR3 to the trampoline's new top level page table */
-	leal	TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax
-	movl	%eax, %cr3
-3:
+	movl	%edi, %cr3
+
 	/* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */
-	pushl	%ecx
-	pushl	%edx
 	movl	$MSR_EFER, %ecx
 	rdmsr
 	btsl	$_EFER_LME, %eax
 	/* Avoid writing EFER if no change was made (for TDX guest) */
 	jc	1f
 	wrmsr
-1:	popl	%edx
-	popl	%ecx
-
-#ifdef CONFIG_X86_MCE
-	/*
-	 * Preserve CR4.MCE if the kernel will enable #MC support.
-	 * Clearing MCE may fault in some environments (that also force #MC
-	 * support). Any machine check that occurs before #MC support is fully
-	 * configured will crash the system regardless of the CR4.MCE value set
-	 * here.
-	 */
-	movl	%cr4, %eax
-	andl	$X86_CR4_MCE, %eax
-#else
-	movl	$0, %eax
-#endif
-
-	/* Enable PAE and LA57 (if required) paging modes */
-	orl	$X86_CR4_PAE, %eax
-	testl	%edx, %edx
-	jz	1f
-	orl	$X86_CR4_LA57, %eax
 1:
+	/* Toggle CR4.LA57 */
+	movl	%cr4, %eax
+	btcl	$X86_CR4_LA57_BIT, %eax
 	movl	%eax, %cr4
 
-	/* Calculate address of paging_enabled() once we are executing in the trampoline */
-	leal	.Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%ecx), %eax
-
-	/* Prepare the stack for far return to Long Mode */
-	pushl	$__KERNEL_CS
-	pushl	%eax
-
 	/* Enable paging again. */
 	movl	%cr0, %eax
 	btsl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 
-	lret
+	/*
+	 * Return to the 64-bit calling code using LJMP rather than LRET, to
+	 * avoid the need for a 32-bit addressable stack. The destination
+	 * address will be adjusted after the template code is copied into a
+	 * 32-bit addressable buffer.
+	 */
+.Ljmp:	ljmpl	$__KERNEL_CS, $(.Lret - trampoline_32bit_src)
 SYM_CODE_END(trampoline_32bit_src)
 
-	.code64
-SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
-	/* Return from the trampoline */
-	retq
-SYM_FUNC_END(.Lpaging_enabled)
+/*
+ * This symbol is placed right after trampoline_32bit_src() so its address can
+ * be used to infer the size of the trampoline code.
+ */
+SYM_DATA(trampoline_ljmp_imm_offset, .word  .Ljmp + 1 - trampoline_32bit_src)
 
 	/*
          * The trampoline code has a size limit.
@@ -721,7 +573,7 @@ SYM_FUNC_END(.Lpaging_enabled)
 	 */
 	.org	trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE
 
-	.code32
+	.text
 SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
 	/* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */
 1:
@@ -729,6 +581,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
 	jmp     1b
 SYM_FUNC_END(.Lno_longmode)
 
+	.globl	verify_cpu
 #include "../../kernel/verify_cpu.S"
 
 	.data
@@ -760,249 +613,11 @@ SYM_DATA_START(boot_idt)
 	.endr
 SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end)
 
-#ifdef CONFIG_AMD_MEM_ENCRYPT
-SYM_DATA_START(boot32_idt_desc)
-	.word   boot32_idt_end - boot32_idt - 1
-	.long   0
-SYM_DATA_END(boot32_idt_desc)
-	.balign 8
-SYM_DATA_START(boot32_idt)
-	.rept 32
-	.quad 0
-	.endr
-SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end)
-#endif
-
-#ifdef CONFIG_EFI_STUB
-SYM_DATA(image_offset, .long 0)
-#endif
-#ifdef CONFIG_EFI_MIXED
-SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
-SYM_DATA(efi_is64, .byte 1)
-
-#define ST32_boottime		60 // offsetof(efi_system_table_32_t, boottime)
-#define BS32_handle_protocol	88 // offsetof(efi_boot_services_32_t, handle_protocol)
-#define LI32_image_base		32 // offsetof(efi_loaded_image_32_t, image_base)
-
-	__HEAD
-	.code32
-SYM_FUNC_START(efi32_pe_entry)
-/*
- * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
- *			       efi_system_table_32_t *sys_table)
- */
-
-	pushl	%ebp
-	movl	%esp, %ebp
-	pushl	%eax				// dummy push to allocate loaded_image
-
-	pushl	%ebx				// save callee-save registers
-	pushl	%edi
-
-	call	verify_cpu			// check for long mode support
-	testl	%eax, %eax
-	movl	$0x80000003, %eax		// EFI_UNSUPPORTED
-	jnz	2f
-
-	call	1f
-1:	pop	%ebx
-	subl	$ rva(1b), %ebx
-
-	/* Get the loaded image protocol pointer from the image handle */
-	leal	-4(%ebp), %eax
-	pushl	%eax				// &loaded_image
-	leal	rva(loaded_image_proto)(%ebx), %eax
-	pushl	%eax				// pass the GUID address
-	pushl	8(%ebp)				// pass the image handle
-
-	/*
-	 * Note the alignment of the stack frame.
-	 *   sys_table
-	 *   handle             <-- 16-byte aligned on entry by ABI
-	 *   return address
-	 *   frame pointer
-	 *   loaded_image       <-- local variable
-	 *   saved %ebx		<-- 16-byte aligned here
-	 *   saved %edi
-	 *   &loaded_image
-	 *   &loaded_image_proto
-	 *   handle             <-- 16-byte aligned for call to handle_protocol
-	 */
-
-	movl	12(%ebp), %eax			// sys_table
-	movl	ST32_boottime(%eax), %eax	// sys_table->boottime
-	call	*BS32_handle_protocol(%eax)	// sys_table->boottime->handle_protocol
-	addl	$12, %esp			// restore argument space
-	testl	%eax, %eax
-	jnz	2f
-
-	movl	8(%ebp), %ecx			// image_handle
-	movl	12(%ebp), %edx			// sys_table
-	movl	-4(%ebp), %esi			// loaded_image
-	movl	LI32_image_base(%esi), %esi	// loaded_image->image_base
-	movl	%ebx, %ebp			// startup_32 for efi32_pe_stub_entry
-	/*
-	 * We need to set the image_offset variable here since startup_32() will
-	 * use it before we get to the 64-bit efi_pe_entry() in C code.
-	 */
-	subl	%esi, %ebx
-	movl	%ebx, rva(image_offset)(%ebp)	// save image_offset
-	jmp	efi32_pe_stub_entry
-
-2:	popl	%edi				// restore callee-save registers
-	popl	%ebx
-	leave
-	RET
-SYM_FUNC_END(efi32_pe_entry)
-
-	.section ".rodata"
-	/* EFI loaded image protocol GUID */
-	.balign 4
-SYM_DATA_START_LOCAL(loaded_image_proto)
-	.long	0x5b1b31a1
-	.word	0x9562, 0x11d2
-	.byte	0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
-SYM_DATA_END(loaded_image_proto)
-#endif
-
-#ifdef CONFIG_AMD_MEM_ENCRYPT
-	__HEAD
-	.code32
-/*
- * Write an IDT entry into boot32_idt
- *
- * Parameters:
- *
- * %eax:	Handler address
- * %edx:	Vector number
- *
- * Physical offset is expected in %ebp
- */
-SYM_FUNC_START(startup32_set_idt_entry)
-	push    %ebx
-	push    %ecx
-
-	/* IDT entry address to %ebx */
-	leal    rva(boot32_idt)(%ebp), %ebx
-	shl	$3, %edx
-	addl    %edx, %ebx
-
-	/* Build IDT entry, lower 4 bytes */
-	movl    %eax, %edx
-	andl    $0x0000ffff, %edx	# Target code segment offset [15:0]
-	movl    $__KERNEL32_CS, %ecx	# Target code segment selector
-	shl     $16, %ecx
-	orl     %ecx, %edx
-
-	/* Store lower 4 bytes to IDT */
-	movl    %edx, (%ebx)
-
-	/* Build IDT entry, upper 4 bytes */
-	movl    %eax, %edx
-	andl    $0xffff0000, %edx	# Target code segment offset [31:16]
-	orl     $0x00008e00, %edx	# Present, Type 32-bit Interrupt Gate
-
-	/* Store upper 4 bytes to IDT */
-	movl    %edx, 4(%ebx)
-
-	pop     %ecx
-	pop     %ebx
-	RET
-SYM_FUNC_END(startup32_set_idt_entry)
-#endif
-
-SYM_FUNC_START(startup32_load_idt)
-#ifdef CONFIG_AMD_MEM_ENCRYPT
-	/* #VC handler */
-	leal    rva(startup32_vc_handler)(%ebp), %eax
-	movl    $X86_TRAP_VC, %edx
-	call    startup32_set_idt_entry
-
-	/* Load IDT */
-	leal	rva(boot32_idt)(%ebp), %eax
-	movl	%eax, rva(boot32_idt_desc+2)(%ebp)
-	lidt    rva(boot32_idt_desc)(%ebp)
-#endif
-	RET
-SYM_FUNC_END(startup32_load_idt)
-
-/*
- * Check for the correct C-bit position when the startup_32 boot-path is used.
- *
- * The check makes use of the fact that all memory is encrypted when paging is
- * disabled. The function creates 64 bits of random data using the RDRAND
- * instruction. RDRAND is mandatory for SEV guests, so always available. If the
- * hypervisor violates that the kernel will crash right here.
- *
- * The 64 bits of random data are stored to a memory location and at the same
- * time kept in the %eax and %ebx registers. Since encryption is always active
- * when paging is off the random data will be stored encrypted in main memory.
- *
- * Then paging is enabled. When the C-bit position is correct all memory is
- * still mapped encrypted and comparing the register values with memory will
- * succeed. An incorrect C-bit position will map all memory unencrypted, so that
- * the compare will use the encrypted random data and fail.
- */
-SYM_FUNC_START(startup32_check_sev_cbit)
-#ifdef CONFIG_AMD_MEM_ENCRYPT
-	pushl	%eax
-	pushl	%ebx
-	pushl	%ecx
-	pushl	%edx
-
-	/* Check for non-zero sev_status */
-	movl	rva(sev_status)(%ebp), %eax
-	testl	%eax, %eax
-	jz	4f
-
-	/*
-	 * Get two 32-bit random values - Don't bail out if RDRAND fails
-	 * because it is better to prevent forward progress if no random value
-	 * can be gathered.
-	 */
-1:	rdrand	%eax
-	jnc	1b
-2:	rdrand	%ebx
-	jnc	2b
-
-	/* Store to memory and keep it in the registers */
-	movl	%eax, rva(sev_check_data)(%ebp)
-	movl	%ebx, rva(sev_check_data+4)(%ebp)
-
-	/* Enable paging to see if encryption is active */
-	movl	%cr0, %edx			 /* Backup %cr0 in %edx */
-	movl	$(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
-	movl	%ecx, %cr0
-
-	cmpl	%eax, rva(sev_check_data)(%ebp)
-	jne	3f
-	cmpl	%ebx, rva(sev_check_data+4)(%ebp)
-	jne	3f
-
-	movl	%edx, %cr0	/* Restore previous %cr0 */
-
-	jmp	4f
-
-3:	/* Check failed - hlt the machine */
-	hlt
-	jmp	3b
-
-4:
-	popl	%edx
-	popl	%ecx
-	popl	%ebx
-	popl	%eax
-#endif
-	RET
-SYM_FUNC_END(startup32_check_sev_cbit)
-
 /*
  * Stack and heap for uncompression
  */
 	.bss
 	.balign 4
-SYM_DATA_LOCAL(boot_heap,	.fill BOOT_HEAP_SIZE, 1, 0)
-
 SYM_DATA_START_LOCAL(boot_stack)
 	.fill BOOT_STACK_SIZE, 1, 0
 	.balign 16
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c
index b4155273d..b8c42339b 100644
--- a/arch/x86/boot/compressed/ident_map_64.c
+++ b/arch/x86/boot/compressed/ident_map_64.c
@@ -167,8 +167,9 @@ void initialize_identity_maps(void *rmode)
 	 * or does not touch all the pages covering them.
 	 */
 	kernel_add_identity_map((unsigned long)_head, (unsigned long)_end);
-	boot_params = rmode;
-	kernel_add_identity_map((unsigned long)boot_params, (unsigned long)(boot_params + 1));
+	boot_params_ptr = rmode;
+	kernel_add_identity_map((unsigned long)boot_params_ptr,
+				(unsigned long)(boot_params_ptr + 1));
 	cmdline = get_cmd_line_ptr();
 	kernel_add_identity_map(cmdline, cmdline + COMMAND_LINE_SIZE);
 
@@ -176,7 +177,7 @@ void initialize_identity_maps(void *rmode)
 	 * Also map the setup_data entries passed via boot_params in case they
 	 * need to be accessed by uncompressed kernel via the identity mapping.
 	 */
-	sd = (struct setup_data *)boot_params->hdr.setup_data;
+	sd = (struct setup_data *)boot_params_ptr->hdr.setup_data;
 	while (sd) {
 		unsigned long sd_addr = (unsigned long)sd;
 
@@ -393,3 +394,8 @@ void do_boot_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 */
 	kernel_add_identity_map(address, end);
 }
+
+void do_boot_nmi_trap(struct pt_regs *regs, unsigned long error_code)
+{
+	/* Empty handler to ignore NMI during early boot */
+}
diff --git a/arch/x86/boot/compressed/idt_64.c b/arch/x86/boot/compressed/idt_64.c
index 3cdf94b41..d100284bb 100644
--- a/arch/x86/boot/compressed/idt_64.c
+++ b/arch/x86/boot/compressed/idt_64.c
@@ -61,6 +61,7 @@ void load_stage2_idt(void)
 	boot_idt_desc.address = (unsigned long)boot_idt;
 
 	set_idt_entry(X86_TRAP_PF, boot_page_fault);
+	set_idt_entry(X86_TRAP_NMI, boot_nmi_trap);
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	/*
diff --git a/arch/x86/boot/compressed/idt_handlers_64.S b/arch/x86/boot/compressed/idt_handlers_64.S
index 22890e199..4d03c8562 100644
--- a/arch/x86/boot/compressed/idt_handlers_64.S
+++ b/arch/x86/boot/compressed/idt_handlers_64.S
@@ -70,6 +70,7 @@ SYM_FUNC_END(\name)
 	.code64
 
 EXCEPTION_HANDLER	boot_page_fault do_boot_page_fault error_code=1
+EXCEPTION_HANDLER	boot_nmi_trap do_boot_nmi_trap error_code=0
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 EXCEPTION_HANDLER	boot_stage1_vc do_vc_no_ghcb		error_code=1
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index e476bcbd9..9794d9174 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -63,7 +63,7 @@ static unsigned long get_boot_seed(void)
 	unsigned long hash = 0;
 
 	hash = rotate_xor(hash, build_str, sizeof(build_str));
-	hash = rotate_xor(hash, boot_params, sizeof(*boot_params));
+	hash = rotate_xor(hash, boot_params_ptr, sizeof(*boot_params_ptr));
 
 	return hash;
 }
@@ -383,7 +383,7 @@ static void handle_mem_options(void)
 static void mem_avoid_init(unsigned long input, unsigned long input_size,
 			   unsigned long output)
 {
-	unsigned long init_size = boot_params->hdr.init_size;
+	unsigned long init_size = boot_params_ptr->hdr.init_size;
 	u64 initrd_start, initrd_size;
 	unsigned long cmd_line, cmd_line_size;
 
@@ -395,10 +395,10 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
 	mem_avoid[MEM_AVOID_ZO_RANGE].size = (output + init_size) - input;
 
 	/* Avoid initrd. */
-	initrd_start  = (u64)boot_params->ext_ramdisk_image << 32;
-	initrd_start |= boot_params->hdr.ramdisk_image;
-	initrd_size  = (u64)boot_params->ext_ramdisk_size << 32;
-	initrd_size |= boot_params->hdr.ramdisk_size;
+	initrd_start  = (u64)boot_params_ptr->ext_ramdisk_image << 32;
+	initrd_start |= boot_params_ptr->hdr.ramdisk_image;
+	initrd_size  = (u64)boot_params_ptr->ext_ramdisk_size << 32;
+	initrd_size |= boot_params_ptr->hdr.ramdisk_size;
 	mem_avoid[MEM_AVOID_INITRD].start = initrd_start;
 	mem_avoid[MEM_AVOID_INITRD].size = initrd_size;
 	/* No need to set mapping for initrd, it will be handled in VO. */
@@ -413,8 +413,8 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
 	}
 
 	/* Avoid boot parameters. */
-	mem_avoid[MEM_AVOID_BOOTPARAMS].start = (unsigned long)boot_params;
-	mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params);
+	mem_avoid[MEM_AVOID_BOOTPARAMS].start = (unsigned long)boot_params_ptr;
+	mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params_ptr);
 
 	/* We don't need to set a mapping for setup_data. */
 
@@ -447,7 +447,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
 	}
 
 	/* Avoid all entries in the setup_data linked list. */
-	ptr = (struct setup_data *)(unsigned long)boot_params->hdr.setup_data;
+	ptr = (struct setup_data *)(unsigned long)boot_params_ptr->hdr.setup_data;
 	while (ptr) {
 		struct mem_vector avoid;
 
@@ -679,7 +679,7 @@ static bool process_mem_region(struct mem_vector *region,
 static bool
 process_efi_entries(unsigned long minimum, unsigned long image_size)
 {
-	struct efi_info *e = &boot_params->efi_info;
+	struct efi_info *e = &boot_params_ptr->efi_info;
 	bool efi_mirror_found = false;
 	struct mem_vector region;
 	efi_memory_desc_t *md;
@@ -761,8 +761,8 @@ static void process_e820_entries(unsigned long minimum,
 	struct boot_e820_entry *entry;
 
 	/* Verify potential e820 positions, appending to slots list. */
-	for (i = 0; i < boot_params->e820_entries; i++) {
-		entry = &boot_params->e820_table[i];
+	for (i = 0; i < boot_params_ptr->e820_entries; i++) {
+		entry = &boot_params_ptr->e820_table[i];
 		/* Skip non-RAM entries. */
 		if (entry->type != E820_TYPE_RAM)
 			continue;
@@ -836,7 +836,7 @@ void choose_random_location(unsigned long input,
 		return;
 	}
 
-	boot_params->hdr.loadflags |= KASLR_FLAG;
+	boot_params_ptr->hdr.loadflags |= KASLR_FLAG;
 
 	if (IS_ENABLED(CONFIG_X86_32))
 		mem_limit = KERNEL_IMAGE_SIZE;
diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S
index a73e4d783..32f7cc8a8 100644
--- a/arch/x86/boot/compressed/mem_encrypt.S
+++ b/arch/x86/boot/compressed/mem_encrypt.S
@@ -12,16 +12,13 @@
 #include <asm/processor-flags.h>
 #include <asm/msr.h>
 #include <asm/asm-offsets.h>
+#include <asm/segment.h>
+#include <asm/trapnr.h>
 
 	.text
 	.code32
 SYM_FUNC_START(get_sev_encryption_bit)
-	xor	%eax, %eax
-
-#ifdef CONFIG_AMD_MEM_ENCRYPT
 	push	%ebx
-	push	%ecx
-	push	%edx
 
 	movl	$0x80000000, %eax	/* CPUID to check the highest leaf */
 	cpuid
@@ -52,12 +49,7 @@ SYM_FUNC_START(get_sev_encryption_bit)
 	xor	%eax, %eax
 
 .Lsev_exit:
-	pop	%edx
-	pop	%ecx
 	pop	%ebx
-
-#endif	/* CONFIG_AMD_MEM_ENCRYPT */
-
 	RET
 SYM_FUNC_END(get_sev_encryption_bit)
 
@@ -98,7 +90,7 @@ SYM_CODE_START_LOCAL(sev_es_req_cpuid)
 	jmp	1b
 SYM_CODE_END(sev_es_req_cpuid)
 
-SYM_CODE_START(startup32_vc_handler)
+SYM_CODE_START_LOCAL(startup32_vc_handler)
 	pushl	%eax
 	pushl	%ebx
 	pushl	%ecx
@@ -184,15 +176,149 @@ SYM_CODE_START(startup32_vc_handler)
 	jmp .Lfail
 SYM_CODE_END(startup32_vc_handler)
 
+/*
+ * Write an IDT entry into boot32_idt
+ *
+ * Parameters:
+ *
+ * %eax:	Handler address
+ * %edx:	Vector number
+ * %ecx:	IDT address
+ */
+SYM_FUNC_START_LOCAL(startup32_set_idt_entry)
+	/* IDT entry address to %ecx */
+	leal	(%ecx, %edx, 8), %ecx
+
+	/* Build IDT entry, lower 4 bytes */
+	movl    %eax, %edx
+	andl    $0x0000ffff, %edx		# Target code segment offset [15:0]
+	orl	$(__KERNEL32_CS << 16), %edx	# Target code segment selector
+
+	/* Store lower 4 bytes to IDT */
+	movl    %edx, (%ecx)
+
+	/* Build IDT entry, upper 4 bytes */
+	movl    %eax, %edx
+	andl    $0xffff0000, %edx	# Target code segment offset [31:16]
+	orl     $0x00008e00, %edx	# Present, Type 32-bit Interrupt Gate
+
+	/* Store upper 4 bytes to IDT */
+	movl    %edx, 4(%ecx)
+
+	RET
+SYM_FUNC_END(startup32_set_idt_entry)
+
+SYM_FUNC_START(startup32_load_idt)
+	push	%ebp
+	push	%ebx
+
+	call	1f
+1:	pop	%ebp
+
+	leal    (boot32_idt - 1b)(%ebp), %ebx
+
+	/* #VC handler */
+	leal    (startup32_vc_handler - 1b)(%ebp), %eax
+	movl    $X86_TRAP_VC, %edx
+	movl	%ebx, %ecx
+	call    startup32_set_idt_entry
+
+	/* Load IDT */
+	leal	(boot32_idt_desc - 1b)(%ebp), %ecx
+	movl	%ebx, 2(%ecx)
+	lidt    (%ecx)
+
+	pop	%ebx
+	pop	%ebp
+	RET
+SYM_FUNC_END(startup32_load_idt)
+
+/*
+ * Check for the correct C-bit position when the startup_32 boot-path is used.
+ *
+ * The check makes use of the fact that all memory is encrypted when paging is
+ * disabled. The function creates 64 bits of random data using the RDRAND
+ * instruction. RDRAND is mandatory for SEV guests, so always available. If the
+ * hypervisor violates that the kernel will crash right here.
+ *
+ * The 64 bits of random data are stored to a memory location and at the same
+ * time kept in the %eax and %ebx registers. Since encryption is always active
+ * when paging is off the random data will be stored encrypted in main memory.
+ *
+ * Then paging is enabled. When the C-bit position is correct all memory is
+ * still mapped encrypted and comparing the register values with memory will
+ * succeed. An incorrect C-bit position will map all memory unencrypted, so that
+ * the compare will use the encrypted random data and fail.
+ */
+SYM_FUNC_START(startup32_check_sev_cbit)
+	pushl	%ebx
+	pushl	%ebp
+
+	call	0f
+0:	popl	%ebp
+
+	/* Check for non-zero sev_status */
+	movl	(sev_status - 0b)(%ebp), %eax
+	testl	%eax, %eax
+	jz	4f
+
+	/*
+	 * Get two 32-bit random values - Don't bail out if RDRAND fails
+	 * because it is better to prevent forward progress if no random value
+	 * can be gathered.
+	 */
+1:	rdrand	%eax
+	jnc	1b
+2:	rdrand	%ebx
+	jnc	2b
+
+	/* Store to memory and keep it in the registers */
+	leal	(sev_check_data - 0b)(%ebp), %ebp
+	movl	%eax, 0(%ebp)
+	movl	%ebx, 4(%ebp)
+
+	/* Enable paging to see if encryption is active */
+	movl	%cr0, %edx			 /* Backup %cr0 in %edx */
+	movl	$(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
+	movl	%ecx, %cr0
+
+	cmpl	%eax, 0(%ebp)
+	jne	3f
+	cmpl	%ebx, 4(%ebp)
+	jne	3f
+
+	movl	%edx, %cr0	/* Restore previous %cr0 */
+
+	jmp	4f
+
+3:	/* Check failed - hlt the machine */
+	hlt
+	jmp	3b
+
+4:
+	popl	%ebp
+	popl	%ebx
+	RET
+SYM_FUNC_END(startup32_check_sev_cbit)
+
 	.code64
 
 #include "../../kernel/sev_verify_cbit.S"
 
 	.data
 
-#ifdef CONFIG_AMD_MEM_ENCRYPT
 	.balign	8
 SYM_DATA(sme_me_mask,		.quad 0)
 SYM_DATA(sev_status,		.quad 0)
 SYM_DATA(sev_check_data,	.quad 0)
-#endif
+
+SYM_DATA_START_LOCAL(boot32_idt)
+	.rept	32
+	.quad	0
+	.endr
+SYM_DATA_END(boot32_idt)
+
+SYM_DATA_START_LOCAL(boot32_idt_desc)
+	.word	. - boot32_idt - 1
+	.long	0
+SYM_DATA_END(boot32_idt_desc)
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index cf690d871..8ae7893d7 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -46,7 +46,7 @@ void *memmove(void *dest, const void *src, size_t n);
 /*
  * This is set up by the setup-routine at boot-time
  */
-struct boot_params *boot_params;
+struct boot_params *boot_params_ptr;
 
 struct port_io_ops pio_ops;
 
@@ -132,8 +132,8 @@ void __putstr(const char *s)
 	if (lines == 0 || cols == 0)
 		return;
 
-	x = boot_params->screen_info.orig_x;
-	y = boot_params->screen_info.orig_y;
+	x = boot_params_ptr->screen_info.orig_x;
+	y = boot_params_ptr->screen_info.orig_y;
 
 	while ((c = *s++) != '\0') {
 		if (c == '\n') {
@@ -154,8 +154,8 @@ void __putstr(const char *s)
 		}
 	}
 
-	boot_params->screen_info.orig_x = x;
-	boot_params->screen_info.orig_y = y;
+	boot_params_ptr->screen_info.orig_x = x;
+	boot_params_ptr->screen_info.orig_y = y;
 
 	pos = (x + cols * y) * 2;	/* Update cursor position */
 	outb(14, vidport);
@@ -277,7 +277,7 @@ static inline void handle_relocations(void *output, unsigned long output_len,
 { }
 #endif
 
-static void parse_elf(void *output)
+static size_t parse_elf(void *output)
 {
 #ifdef CONFIG_X86_64
 	Elf64_Ehdr ehdr;
@@ -293,10 +293,8 @@ static void parse_elf(void *output)
 	if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
 	   ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
 	   ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
-	   ehdr.e_ident[EI_MAG3] != ELFMAG3) {
+	   ehdr.e_ident[EI_MAG3] != ELFMAG3)
 		error("Kernel is not a valid ELF file");
-		return;
-	}
 
 	debug_putstr("Parsing ELF... ");
 
@@ -328,6 +326,35 @@ static void parse_elf(void *output)
 	}
 
 	free(phdrs);
+
+	return ehdr.e_entry - LOAD_PHYSICAL_ADDR;
+}
+
+const unsigned long kernel_total_size = VO__end - VO__text;
+
+static u8 boot_heap[BOOT_HEAP_SIZE] __aligned(4);
+
+extern unsigned char input_data[];
+extern unsigned int input_len, output_len;
+
+unsigned long decompress_kernel(unsigned char *outbuf, unsigned long virt_addr,
+				void (*error)(char *x))
+{
+	unsigned long entry;
+
+	if (!free_mem_ptr) {
+		free_mem_ptr     = (unsigned long)boot_heap;
+		free_mem_end_ptr = (unsigned long)boot_heap + sizeof(boot_heap);
+	}
+
+	if (__decompress(input_data, input_len, NULL, NULL, outbuf, output_len,
+			 NULL, error) < 0)
+		return ULONG_MAX;
+
+	entry = parse_elf(outbuf);
+	handle_relocations(outbuf, output_len, virt_addr);
+
+	return entry;
 }
 
 /*
@@ -347,25 +374,22 @@ static void parse_elf(void *output)
  *             |-------uncompressed kernel image---------|
  *
  */
-asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
-				  unsigned char *input_data,
-				  unsigned long input_len,
-				  unsigned char *output,
-				  unsigned long output_len)
+asmlinkage __visible void *extract_kernel(void *rmode, unsigned char *output)
 {
-	const unsigned long kernel_total_size = VO__end - VO__text;
 	unsigned long virt_addr = LOAD_PHYSICAL_ADDR;
+	memptr heap = (memptr)boot_heap;
 	unsigned long needed_size;
+	size_t entry_offset;
 
 	/* Retain x86 boot parameters pointer passed from startup_32/64. */
-	boot_params = rmode;
+	boot_params_ptr = rmode;
 
 	/* Clear flags intended for solely in-kernel use. */
-	boot_params->hdr.loadflags &= ~KASLR_FLAG;
+	boot_params_ptr->hdr.loadflags &= ~KASLR_FLAG;
 
-	sanitize_boot_params(boot_params);
+	sanitize_boot_params(boot_params_ptr);
 
-	if (boot_params->screen_info.orig_video_mode == 7) {
+	if (boot_params_ptr->screen_info.orig_video_mode == 7) {
 		vidmem = (char *) 0xb0000;
 		vidport = 0x3b4;
 	} else {
@@ -373,8 +397,8 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 		vidport = 0x3d4;
 	}
 
-	lines = boot_params->screen_info.orig_video_lines;
-	cols = boot_params->screen_info.orig_video_cols;
+	lines = boot_params_ptr->screen_info.orig_video_lines;
+	cols = boot_params_ptr->screen_info.orig_video_cols;
 
 	init_default_io_ops();
 
@@ -393,7 +417,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 	 * so that early debugging output from the RSDP parsing code can be
 	 * collected.
 	 */
-	boot_params->acpi_rsdp_addr = get_rsdp_addr();
+	boot_params_ptr->acpi_rsdp_addr = get_rsdp_addr();
 
 	debug_putstr("early console in extract_kernel\n");
 
@@ -411,7 +435,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 	 * entries. This ensures the full mapped area is usable RAM
 	 * and doesn't include any reserved areas.
 	 */
-	needed_size = max(output_len, kernel_total_size);
+	needed_size = max_t(unsigned long, output_len, kernel_total_size);
 #ifdef CONFIG_X86_64
 	needed_size = ALIGN(needed_size, MIN_KERNEL_ALIGN);
 #endif
@@ -442,7 +466,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 #ifdef CONFIG_X86_64
 	if (heap > 0x3fffffffffffUL)
 		error("Destination address too large");
-	if (virt_addr + max(output_len, kernel_total_size) > KERNEL_IMAGE_SIZE)
+	if (virt_addr + needed_size > KERNEL_IMAGE_SIZE)
 		error("Destination virtual address is beyond the kernel mapping area");
 #else
 	if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
@@ -454,16 +478,17 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 #endif
 
 	debug_putstr("\nDecompressing Linux... ");
-	__decompress(input_data, input_len, NULL, NULL, output, output_len,
-			NULL, error);
-	parse_elf(output);
-	handle_relocations(output, output_len, virt_addr);
-	debug_putstr("done.\nBooting the kernel.\n");
+
+	entry_offset = decompress_kernel(output, virt_addr, error);
+
+	debug_putstr("done.\nBooting the kernel (entry_offset: 0x");
+	debug_puthex(entry_offset);
+	debug_putstr(").\n");
 
 	/* Disable exception handling before booting the kernel */
 	cleanup_exception_handling();
 
-	return output;
+	return output + entry_offset;
 }
 
 void fortify_panic(const char *name)
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index 20118fb7c..254acd76e 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -52,7 +52,6 @@ extern memptr free_mem_ptr;
 extern memptr free_mem_end_ptr;
 void *malloc(int size);
 void free(void *where);
-extern struct boot_params *boot_params;
 void __putstr(const char *s);
 void __puthex(unsigned long value);
 #define error_putstr(__x)  __putstr(__x)
@@ -170,9 +169,7 @@ static inline int count_immovable_mem_regions(void) { return 0; }
 #endif
 
 /* ident_map_64.c */
-#ifdef CONFIG_X86_5LEVEL
 extern unsigned int __pgtable_l5_enabled, pgdir_shift, ptrs_per_p4d;
-#endif
 extern void kernel_add_identity_map(unsigned long start, unsigned long end);
 
 /* Used by PAGE_KERN* macros: */
@@ -190,6 +187,7 @@ static inline void cleanup_exception_handling(void) { }
 
 /* IDT Entry Points */
 void boot_page_fault(void);
+void boot_nmi_trap(void);
 void boot_stage1_vc(void);
 void boot_stage2_vc(void);
 
diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h
index cc9b2529a..6d595abe0 100644
--- a/arch/x86/boot/compressed/pgtable.h
+++ b/arch/x86/boot/compressed/pgtable.h
@@ -3,18 +3,16 @@
 
 #define TRAMPOLINE_32BIT_SIZE		(2 * PAGE_SIZE)
 
-#define TRAMPOLINE_32BIT_PGTABLE_OFFSET	0
-
 #define TRAMPOLINE_32BIT_CODE_OFFSET	PAGE_SIZE
-#define TRAMPOLINE_32BIT_CODE_SIZE	0x80
-
-#define TRAMPOLINE_32BIT_STACK_END	TRAMPOLINE_32BIT_SIZE
+#define TRAMPOLINE_32BIT_CODE_SIZE	0xA0
 
 #ifndef __ASSEMBLER__
 
 extern unsigned long *trampoline_32bit;
 
-extern void trampoline_32bit_src(void *return_ptr);
+extern void trampoline_32bit_src(void *trampoline, bool enable_5lvl);
+
+extern const u16 trampoline_ljmp_imm_offset;
 
 #endif /* __ASSEMBLER__ */
 #endif /* BOOT_COMPRESSED_PAGETABLE_H */
diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index 2ac12ff41..51f957b24 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -16,11 +16,6 @@ unsigned int __section(".data") pgdir_shift = 39;
 unsigned int __section(".data") ptrs_per_p4d = 1;
 #endif
 
-struct paging_config {
-	unsigned long trampoline_start;
-	unsigned long l5_required;
-};
-
 /* Buffer to preserve trampoline memory */
 static char trampoline_save[TRAMPOLINE_32BIT_SIZE];
 
@@ -29,11 +24,10 @@ static char trampoline_save[TRAMPOLINE_32BIT_SIZE];
  * purposes.
  *
  * Avoid putting the pointer into .bss as it will be cleared between
- * paging_prepare() and extract_kernel().
+ * configure_5level_paging() and extract_kernel().
  */
 unsigned long *trampoline_32bit __section(".data");
 
-extern struct boot_params *boot_params;
 int cmdline_find_option_bool(const char *option);
 
 static unsigned long find_trampoline_placement(void)
@@ -54,7 +48,7 @@ static unsigned long find_trampoline_placement(void)
 	 *
 	 * Only look for values in the legacy ROM for non-EFI system.
 	 */
-	signature = (char *)&boot_params->efi_info.efi_loader_signature;
+	signature = (char *)&boot_params_ptr->efi_info.efi_loader_signature;
 	if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) &&
 	    strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) {
 		ebda_start = *(unsigned short *)0x40e << 4;
@@ -70,10 +64,10 @@ static unsigned long find_trampoline_placement(void)
 	bios_start = round_down(bios_start, PAGE_SIZE);
 
 	/* Find the first usable memory region under bios_start. */
-	for (i = boot_params->e820_entries - 1; i >= 0; i--) {
+	for (i = boot_params_ptr->e820_entries - 1; i >= 0; i--) {
 		unsigned long new = bios_start;
 
-		entry = &boot_params->e820_table[i];
+		entry = &boot_params_ptr->e820_table[i];
 
 		/* Skip all entries above bios_start. */
 		if (bios_start <= entry->addr)
@@ -106,12 +100,13 @@ static unsigned long find_trampoline_placement(void)
 	return bios_start - TRAMPOLINE_32BIT_SIZE;
 }
 
-struct paging_config paging_prepare(void *rmode)
+asmlinkage void configure_5level_paging(struct boot_params *bp, void *pgtable)
 {
-	struct paging_config paging_config = {};
+	void (*toggle_la57)(void *cr3);
+	bool l5_required = false;
 
 	/* Initialize boot_params. Required for cmdline_find_option_bool(). */
-	boot_params = rmode;
+	boot_params_ptr = bp;
 
 	/*
 	 * Check if LA57 is desired and supported.
@@ -129,12 +124,22 @@ struct paging_config paging_prepare(void *rmode)
 			!cmdline_find_option_bool("no5lvl") &&
 			native_cpuid_eax(0) >= 7 &&
 			(native_cpuid_ecx(7) & (1 << (X86_FEATURE_LA57 & 31)))) {
-		paging_config.l5_required = 1;
+		l5_required = true;
+
+		/* Initialize variables for 5-level paging */
+		__pgtable_l5_enabled = 1;
+		pgdir_shift = 48;
+		ptrs_per_p4d = 512;
 	}
 
-	paging_config.trampoline_start = find_trampoline_placement();
+	/*
+	 * The trampoline will not be used if the paging mode is already set to
+	 * the desired one.
+	 */
+	if (l5_required == !!(native_read_cr4() & X86_CR4_LA57))
+		return;
 
-	trampoline_32bit = (unsigned long *)paging_config.trampoline_start;
+	trampoline_32bit = (unsigned long *)find_trampoline_placement();
 
 	/* Preserve trampoline memory */
 	memcpy(trampoline_save, trampoline_32bit, TRAMPOLINE_32BIT_SIZE);
@@ -143,32 +148,32 @@ struct paging_config paging_prepare(void *rmode)
 	memset(trampoline_32bit, 0, TRAMPOLINE_32BIT_SIZE);
 
 	/* Copy trampoline code in place */
-	memcpy(trampoline_32bit + TRAMPOLINE_32BIT_CODE_OFFSET / sizeof(unsigned long),
+	toggle_la57 = memcpy(trampoline_32bit +
+			TRAMPOLINE_32BIT_CODE_OFFSET / sizeof(unsigned long),
 			&trampoline_32bit_src, TRAMPOLINE_32BIT_CODE_SIZE);
 
 	/*
+	 * Avoid the need for a stack in the 32-bit trampoline code, by using
+	 * LJMP rather than LRET to return back to long mode. LJMP takes an
+	 * immediate absolute address, which needs to be adjusted based on the
+	 * placement of the trampoline.
+	 */
+	*(u32 *)((u8 *)toggle_la57 + trampoline_ljmp_imm_offset) +=
+						(unsigned long)toggle_la57;
+
+	/*
 	 * The code below prepares page table in trampoline memory.
 	 *
 	 * The new page table will be used by trampoline code for switching
 	 * from 4- to 5-level paging or vice versa.
-	 *
-	 * If switching is not required, the page table is unused: trampoline
-	 * code wouldn't touch CR3.
-	 */
-
-	/*
-	 * We are not going to use the page table in trampoline memory if we
-	 * are already in the desired paging mode.
 	 */
-	if (paging_config.l5_required == !!(native_read_cr4() & X86_CR4_LA57))
-		goto out;
 
-	if (paging_config.l5_required) {
+	if (l5_required) {
 		/*
 		 * For 4- to 5-level paging transition, set up current CR3 as
 		 * the first and the only entry in a new top-level page table.
 		 */
-		trampoline_32bit[TRAMPOLINE_32BIT_PGTABLE_OFFSET] = __native_read_cr3() | _PAGE_TABLE_NOENC;
+		*trampoline_32bit = __native_read_cr3() | _PAGE_TABLE_NOENC;
 	} else {
 		unsigned long src;
 
@@ -181,38 +186,17 @@ struct paging_config paging_prepare(void *rmode)
 		 * may be above 4G.
 		 */
 		src = *(unsigned long *)__native_read_cr3() & PAGE_MASK;
-		memcpy(trampoline_32bit + TRAMPOLINE_32BIT_PGTABLE_OFFSET / sizeof(unsigned long),
-		       (void *)src, PAGE_SIZE);
+		memcpy(trampoline_32bit, (void *)src, PAGE_SIZE);
 	}
 
-out:
-	return paging_config;
-}
-
-void cleanup_trampoline(void *pgtable)
-{
-	void *trampoline_pgtable;
-
-	trampoline_pgtable = trampoline_32bit + TRAMPOLINE_32BIT_PGTABLE_OFFSET / sizeof(unsigned long);
+	toggle_la57(trampoline_32bit);
 
 	/*
-	 * Move the top level page table out of trampoline memory,
-	 * if it's there.
+	 * Move the top level page table out of trampoline memory.
 	 */
-	if ((void *)__native_read_cr3() == trampoline_pgtable) {
-		memcpy(pgtable, trampoline_pgtable, PAGE_SIZE);
-		native_write_cr3((unsigned long)pgtable);
-	}
+	memcpy(pgtable, trampoline_32bit, PAGE_SIZE);
+	native_write_cr3((unsigned long)pgtable);
 
 	/* Restore trampoline memory */
 	memcpy(trampoline_32bit, trampoline_save, TRAMPOLINE_32BIT_SIZE);
-
-	/* Initialize variables for 5-level paging */
-#ifdef CONFIG_X86_5LEVEL
-	if (__read_cr4() & X86_CR4_LA57) {
-		__pgtable_l5_enabled = 1;
-		pgdir_shift = 48;
-		ptrs_per_p4d = 512;
-	}
-#endif
 }
diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index 9c91cc40f..d07e665bb 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -327,20 +327,25 @@ static void enforce_vmpl0(void)
  */
 #define SNP_FEATURES_PRESENT (0)
 
+u64 snp_get_unsupported_features(u64 status)
+{
+	if (!(status & MSR_AMD64_SEV_SNP_ENABLED))
+		return 0;
+
+	return status & SNP_FEATURES_IMPL_REQ & ~SNP_FEATURES_PRESENT;
+}
+
 void snp_check_features(void)
 {
 	u64 unsupported;
 
-	if (!(sev_status & MSR_AMD64_SEV_SNP_ENABLED))
-		return;
-
 	/*
 	 * Terminate the boot if hypervisor has enabled any feature lacking
 	 * guest side implementation. Pass on the unsupported features mask through
 	 * EXIT_INFO_2 of the GHCB protocol so that those features can be reported
 	 * as part of the guest boot failure.
 	 */
-	unsupported = sev_status & SNP_FEATURES_IMPL_REQ & ~SNP_FEATURES_PRESENT;
+	unsupported = snp_get_unsupported_features(sev_status);
 	if (unsupported) {
 		if (ghcb_version < 2 || (!boot_ghcb && !early_setup_ghcb()))
 			sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
@@ -350,35 +355,22 @@ void snp_check_features(void)
 	}
 }
 
-void sev_enable(struct boot_params *bp)
+/*
+ * sev_check_cpu_support - Check for SEV support in the CPU capabilities
+ *
+ * Returns < 0 if SEV is not supported, otherwise the position of the
+ * encryption bit in the page table descriptors.
+ */
+static int sev_check_cpu_support(void)
 {
 	unsigned int eax, ebx, ecx, edx;
-	struct msr m;
-	bool snp;
-
-	/*
-	 * bp->cc_blob_address should only be set by boot/compressed kernel.
-	 * Initialize it to 0 to ensure that uninitialized values from
-	 * buggy bootloaders aren't propagated.
-	 */
-	if (bp)
-		bp->cc_blob_address = 0;
-
-	/*
-	 * Do an initial SEV capability check before snp_init() which
-	 * loads the CPUID page and the same checks afterwards are done
-	 * without the hypervisor and are trustworthy.
-	 *
-	 * If the HV fakes SEV support, the guest will crash'n'burn
-	 * which is good enough.
-	 */
 
 	/* Check for the SME/SEV support leaf */
 	eax = 0x80000000;
 	ecx = 0;
 	native_cpuid(&eax, &ebx, &ecx, &edx);
 	if (eax < 0x8000001f)
-		return;
+		return -ENODEV;
 
 	/*
 	 * Check for the SME/SEV feature:
@@ -393,6 +385,35 @@ void sev_enable(struct boot_params *bp)
 	native_cpuid(&eax, &ebx, &ecx, &edx);
 	/* Check whether SEV is supported */
 	if (!(eax & BIT(1)))
+		return -ENODEV;
+
+	return ebx & 0x3f;
+}
+
+void sev_enable(struct boot_params *bp)
+{
+	struct msr m;
+	int bitpos;
+	bool snp;
+
+	/*
+	 * bp->cc_blob_address should only be set by boot/compressed kernel.
+	 * Initialize it to 0 to ensure that uninitialized values from
+	 * buggy bootloaders aren't propagated.
+	 */
+	if (bp)
+		bp->cc_blob_address = 0;
+
+	/*
+	 * Do an initial SEV capability check before snp_init() which
+	 * loads the CPUID page and the same checks afterwards are done
+	 * without the hypervisor and are trustworthy.
+	 *
+	 * If the HV fakes SEV support, the guest will crash'n'burn
+	 * which is good enough.
+	 */
+
+	if (sev_check_cpu_support() < 0)
 		return;
 
 	/*
@@ -403,26 +424,8 @@ void sev_enable(struct boot_params *bp)
 
 	/* Now repeat the checks with the SNP CPUID table. */
 
-	/* Recheck the SME/SEV support leaf */
-	eax = 0x80000000;
-	ecx = 0;
-	native_cpuid(&eax, &ebx, &ecx, &edx);
-	if (eax < 0x8000001f)
-		return;
-
-	/*
-	 * Recheck for the SME/SEV feature:
-	 *   CPUID Fn8000_001F[EAX]
-	 *   - Bit 0 - Secure Memory Encryption support
-	 *   - Bit 1 - Secure Encrypted Virtualization support
-	 *   CPUID Fn8000_001F[EBX]
-	 *   - Bits 5:0 - Pagetable bit position used to indicate encryption
-	 */
-	eax = 0x8000001f;
-	ecx = 0;
-	native_cpuid(&eax, &ebx, &ecx, &edx);
-	/* Check whether SEV is supported */
-	if (!(eax & BIT(1))) {
+	bitpos = sev_check_cpu_support();
+	if (bitpos < 0) {
 		if (snp)
 			error("SEV-SNP support indicated by CC blob, but not CPUID.");
 		return;
@@ -454,7 +457,24 @@ void sev_enable(struct boot_params *bp)
 	if (snp && !(sev_status & MSR_AMD64_SEV_SNP_ENABLED))
 		error("SEV-SNP supported indicated by CC blob, but not SEV status MSR.");
 
-	sme_me_mask = BIT_ULL(ebx & 0x3f);
+	sme_me_mask = BIT_ULL(bitpos);
+}
+
+/*
+ * sev_get_status - Retrieve the SEV status mask
+ *
+ * Returns 0 if the CPU is not SEV capable, otherwise the value of the
+ * AMD64_SEV MSR.
+ */
+u64 sev_get_status(void)
+{
+	struct msr m;
+
+	if (sev_check_cpu_support() < 0)
+		return 0;
+
+	boot_rdmsr(MSR_AMD64_SEV, &m);
+	return m.q;
 }
 
 /* Search for Confidential Computing blob in the EFI config table. */
@@ -545,7 +565,7 @@ void sev_prep_identity_maps(unsigned long top_level_pgt)
 	 * accessed after switchover.
 	 */
 	if (sev_snp_enabled()) {
-		unsigned long cc_info_pa = boot_params->cc_blob_address;
+		unsigned long cc_info_pa = boot_params_ptr->cc_blob_address;
 		struct cc_blob_sev_info *cc_info;
 
 		kernel_add_identity_map(cc_info_pa, cc_info_pa + sizeof(*cc_info));
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index f912d7770..d31982509 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -406,7 +406,7 @@ xloadflags:
 # define XLF1 0
 #endif
 
-#ifdef CONFIG_EFI_STUB
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
 # ifdef CONFIG_EFI_MIXED
 #  define XLF23 (XLF_EFI_HANDOVER_32|XLF_EFI_HANDOVER_64)
 # else
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index a3725ad46..bd247692b 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -290,6 +290,7 @@ static void efi_stub_entry_update(void)
 {
 	unsigned long addr = efi32_stub_entry;
 
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
 #ifdef CONFIG_X86_64
 	/* Yes, this is really how we defined it :( */
 	addr = efi64_stub_entry - 0x200;
@@ -299,6 +300,7 @@ static void efi_stub_entry_update(void)
 	if (efi32_stub_entry != addr)
 		die("32-bit and 64-bit EFI entry points do not match\n");
 #endif
+#endif
 	put_unaligned_le32(addr, &buf[0x264]);
 }