Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 320 insertions, 0 deletions

diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
new file mode 100644
index 000000000..efdb94cff
--- /dev/null
+++ b/drivers/ata/pata_atiixp.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_atiixp.c 	- ATI PATA for new ATA layer
+ *			  (C) 2005 Red Hat Inc
+ *			  (C) 2009-2010 Bartlomiej Zolnierkiewicz
+ *
+ * Based on
+ *
+ *  linux/drivers/ide/pci/atiixp.c	Version 0.01-bart2	Feb. 26, 2004
+ *
+ *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
+ *  Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_atiixp"
+#define DRV_VERSION "0.4.6"
+
+enum {
+	ATIIXP_IDE_PIO_TIMING	= 0x40,
+	ATIIXP_IDE_MWDMA_TIMING	= 0x44,
+	ATIIXP_IDE_PIO_CONTROL	= 0x48,
+	ATIIXP_IDE_PIO_MODE	= 0x4a,
+	ATIIXP_IDE_UDMA_CONTROL	= 0x54,
+	ATIIXP_IDE_UDMA_MODE 	= 0x56
+};
+
+static const struct dmi_system_id attixp_cable_override_dmi_table[] = {
+	{
+		/* Board has onboard PATA<->SATA converters */
+		.ident = "MSI E350DM-E33",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
+			DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"),
+		},
+	},
+	{ }
+};
+
+static int atiixp_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 udma;
+
+	if (dmi_check_system(attixp_cable_override_dmi_table))
+		return ATA_CBL_PATA40_SHORT;
+
+	/* Hack from drivers/ide/pci. Really we want to know how to do the
+	   raw detection not play follow the bios mode guess */
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
+	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
+		return  ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
+}
+
+static DEFINE_SPINLOCK(atiixp_lock);
+
+/**
+ *	atiixp_prereset	-	perform reset handling
+ *	@link: ATA link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Reset sequence checking enable bits to see which ports are
+ *	active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+	static const struct pci_bits atiixp_enable_bits[] = {
+		{ 0x48, 1, 0x01, 0x00 },
+		{ 0x48, 1, 0x08, 0x00 }
+	};
+
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+		return -ENOENT;
+
+	return ata_sff_prereset(link, deadline);
+}
+
+/**
+ *	atiixp_set_pio_timing	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *	@pio: Requested PIO
+ *
+ *	Called by both the pio and dma setup functions to set the controller
+ *	timings for PIO transfers. We must load both the mode number and
+ *	timing values into the controller.
+ */
+
+static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+	static const u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dn = 2 * ap->port_no + adev->devno;
+	int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+	u32 pio_timing_data;
+	u16 pio_mode_data;
+
+	pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
+	pio_mode_data &= ~(0x7 << (4 * dn));
+	pio_mode_data |= pio << (4 * dn);
+	pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
+
+	pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+	pio_timing_data &= ~(0xFF << timing_shift);
+	pio_timing_data |= (pio_timings[pio] << timing_shift);
+	pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+}
+
+/**
+ *	atiixp_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup. We use a shared helper for this
+ *	as the DMA setup must also adjust the PIO timing information.
+ */
+
+static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&atiixp_lock, flags);
+	atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
+	spin_unlock_irqrestore(&atiixp_lock, flags);
+}
+
+/**
+ *	atiixp_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the DMA mode setup. We use timing tables for most
+ *	modes but must tune an appropriate PIO mode to match.
+ */
+
+static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dma = adev->dma_mode;
+	int dn = 2 * ap->port_no + adev->devno;
+	int wanted_pio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atiixp_lock, flags);
+
+	if (adev->dma_mode >= XFER_UDMA_0) {
+		u16 udma_mode_data;
+
+		dma -= XFER_UDMA_0;
+
+		pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
+		udma_mode_data &= ~(0x7 << (4 * dn));
+		udma_mode_data |= dma << (4 * dn);
+		pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
+	} else {
+		int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+		u32 mwdma_timing_data;
+
+		dma -= XFER_MW_DMA_0;
+
+		pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+				      &mwdma_timing_data);
+		mwdma_timing_data &= ~(0xFF << timing_shift);
+		mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
+		pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+				       mwdma_timing_data);
+	}
+	/*
+	 *	We must now look at the PIO mode situation. We may need to
+	 *	adjust the PIO mode to keep the timings acceptable
+	 */
+	if (adev->dma_mode >= XFER_MW_DMA_2)
+		wanted_pio = 4;
+	else if (adev->dma_mode == XFER_MW_DMA_1)
+		wanted_pio = 3;
+	else if (adev->dma_mode == XFER_MW_DMA_0)
+		wanted_pio = 0;
+	else BUG();
+
+	if (adev->pio_mode != wanted_pio)
+		atiixp_set_pio_timing(ap, adev, wanted_pio);
+	spin_unlock_irqrestore(&atiixp_lock, flags);
+}
+
+/**
+ *	atiixp_bmdma_start	-	DMA start callback
+ *	@qc: Command in progress
+ *
+ *	When DMA begins we need to ensure that the UDMA control
+ *	register for the channel is correctly set.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
+ */
+
+static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dn = (2 * ap->port_no) + adev->devno;
+	u16 tmp16;
+
+	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+	if (ata_using_udma(adev))
+		tmp16 |= (1 << dn);
+	else
+		tmp16 &= ~(1 << dn);
+	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+	ata_bmdma_start(qc);
+}
+
+/**
+ *	atiixp_bmdma_stop	-	DMA stop callback
+ *	@qc: Command in progress
+ *
+ *	DMA has completed. Clear the UDMA flag as the next operations will
+ *	be PIO ones not UDMA data transfer.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
+ */
+
+static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int dn = (2 * ap->port_no) + qc->dev->devno;
+	u16 tmp16;
+
+	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+	tmp16 &= ~(1 << dn);
+	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+	ata_bmdma_stop(qc);
+}
+
+static struct scsi_host_template atiixp_sht = {
+	ATA_BASE_SHT(DRV_NAME),
+	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations atiixp_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+
+	.qc_prep 	= ata_bmdma_dumb_qc_prep,
+	.bmdma_start 	= atiixp_bmdma_start,
+	.bmdma_stop	= atiixp_bmdma_stop,
+
+	.prereset	= atiixp_prereset,
+	.cable_detect	= atiixp_cable_detect,
+	.set_piomode	= atiixp_set_piomode,
+	.set_dmamode	= atiixp_set_dmamode,
+};
+
+static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static const struct ata_port_info info = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA12_ONLY,
+		.udma_mask = ATA_UDMA5,
+		.port_ops = &atiixp_port_ops
+	};
+	const struct ata_port_info *ppi[] = { &info, &info };
+
+	/* SB600 doesn't have secondary port wired */
+	if (pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)
+		ppi[1] = &ata_dummy_port_info;
+
+	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+				      ATA_HOST_PARALLEL_SCAN);
+}
+
+static const struct pci_device_id atiixp[] = {
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
+
+	{ },
+};
+
+static struct pci_driver atiixp_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= atiixp,
+	.probe 		= atiixp_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+	.resume		= ata_pci_device_resume,
+	.suspend	= ata_pci_device_suspend,
+#endif
+};
+
+module_pci_driver(atiixp_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, atiixp);
+MODULE_VERSION(DRV_VERSION);