Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 472 insertions, 0 deletions

diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
new file mode 100644
index 000000000..0fd46e50a
--- /dev/null
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * X1830 SoC CGU driver
+ * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <dt-bindings/clock/ingenic,x1830-cgu.h>
+
+#include "cgu.h"
+#include "pm.h"
+
+/* CGU register offsets */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_CPPCR		0x0c
+#define CGU_REG_APLL		0x10
+#define CGU_REG_MPLL		0x14
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_DDRCDR		0x2c
+#define CGU_REG_USBPCR		0x3c
+#define CGU_REG_USBRDT		0x40
+#define CGU_REG_USBVBFIL	0x44
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_MACCDR		0x54
+#define CGU_REG_EPLL		0x58
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_I2SCDR1		0x70
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_MSC1CDR		0xa4
+#define CGU_REG_CMP_INTR	0xb0
+#define CGU_REG_CMP_INTRE	0xb4
+#define CGU_REG_DRCG		0xd0
+#define CGU_REG_CPCSR		0xd4
+#define CGU_REG_VPLL		0xe0
+#define CGU_REG_MACPHYC		0xe8
+
+/* bits within the OPCR register */
+#define OPCR_GATE_USBPHYCLK	BIT(23)
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
+
+/* bits within the USBPCR register */
+#define USBPCR_SIDDQ		BIT(21)
+#define USBPCR_OTG_DISABLE	BIT(20)
+
+static struct ingenic_cgu *cgu;
+
+static int x1830_usb_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel((readl(reg_opcr) | OPCR_SPENDN0) & ~OPCR_GATE_USBPHYCLK, reg_opcr);
+	writel(readl(reg_usbpcr) & ~USBPCR_OTG_DISABLE & ~USBPCR_SIDDQ, reg_usbpcr);
+	return 0;
+}
+
+static void x1830_usb_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel((readl(reg_opcr) & ~OPCR_SPENDN0) | OPCR_GATE_USBPHYCLK, reg_opcr);
+	writel(readl(reg_usbpcr) | USBPCR_OTG_DISABLE | USBPCR_SIDDQ, reg_usbpcr);
+}
+
+static int x1830_usb_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	return (readl(reg_opcr) & OPCR_SPENDN0) &&
+		!(readl(reg_usbpcr) & USBPCR_SIDDQ) &&
+		!(readl(reg_usbpcr) & USBPCR_OTG_DISABLE);
+}
+
+static const struct clk_ops x1830_otg_phy_ops = {
+	.enable		= x1830_usb_phy_enable,
+	.disable	= x1830_usb_phy_disable,
+	.is_enabled	= x1830_usb_phy_is_enabled,
+};
+
+static const s8 pll_od_encoding[64] = {
+	0x0, 0x1,  -1, 0x2,  -1,  -1,  -1, 0x3,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x4,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x5,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x6,
+};
+
+static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
+	[X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[X1830_CLK_APLL] = {
+		"apll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_APLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 30,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_MPLL] = {
+		"mpll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_MPLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 28,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_EPLL] = {
+		"epll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_EPLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 24,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_VPLL] = {
+		"vpll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_VPLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 26,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	/* Custom (SoC-specific) OTG PHY */
+
+	[X1830_CLK_OTGPHY] = {
+		"otg_phy", CGU_CLK_CUSTOM,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.custom = { &x1830_otg_phy_ops },
+	},
+
+	/* Muxes & dividers */
+
+	[X1830_CLK_SCLKA] = {
+		"sclk_a", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
+		.mux = { CGU_REG_CPCCR, 30, 2 },
+	},
+
+	[X1830_CLK_CPUMUX] = {
+		"cpu_mux", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 28, 2 },
+	},
+
+	[X1830_CLK_CPU] = {
+		"cpu", CGU_CLK_DIV | CGU_CLK_GATE,
+		.flags = CLK_IS_CRITICAL,
+		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 15 },
+	},
+
+	[X1830_CLK_L2CACHE] = {
+		"l2cache", CGU_CLK_DIV,
+		/*
+		 * The L2 cache clock is critical if caches are enabled and
+		 * disabling it or any parent clocks will hang the system.
+		 */
+		.flags = CLK_IS_CRITICAL,
+		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+
+	[X1830_CLK_AHB0] = {
+		"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 26, 2 },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
+	},
+
+	[X1830_CLK_AHB2PMUX] = {
+		"ahb2_apb_mux", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 24, 2 },
+	},
+
+	[X1830_CLK_AHB2] = {
+		"ahb2", CGU_CLK_DIV,
+		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
+	},
+
+	[X1830_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 14 },
+	},
+
+	[X1830_CLK_DDR] = {
+		"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		/*
+		 * Disabling DDR clock or its parents will render DRAM
+		 * inaccessible; mark it critical.
+		 */
+		.flags = CLK_IS_CRITICAL,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_DDRCDR, 30, 2 },
+		.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 31 },
+	},
+
+	[X1830_CLK_MAC] = {
+		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_MACCDR, 30, 2 },
+		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR1, 4 },
+	},
+
+	[X1830_CLK_LCD] = {
+		"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_LPCDR, 30, 2 },
+		.div = { CGU_REG_LPCDR, 0, 1, 8, 28, 27, 26 },
+		.gate = { CGU_REG_CLKGR1, 9 },
+	},
+
+	[X1830_CLK_MSCMUX] = {
+		"msc_mux", CGU_CLK_MUX,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_MSC0CDR, 30, 2 },
+	},
+
+	[X1830_CLK_MSC0] = {
+		"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+
+	[X1830_CLK_MSC1] = {
+		"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+
+	[X1830_CLK_SSIPLL] = {
+		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_SSICDR, 30, 2 },
+		.div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
+	},
+
+	[X1830_CLK_SSIPLL_DIV2] = {
+		"ssi_pll_div2", CGU_CLK_FIXDIV,
+		.parents = { X1830_CLK_SSIPLL },
+		.fixdiv = { 2 },
+	},
+
+	[X1830_CLK_SSIMUX] = {
+		"ssi_mux", CGU_CLK_MUX,
+		.parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL_DIV2, -1, -1 },
+		.mux = { CGU_REG_SSICDR, 29, 1 },
+	},
+
+	[X1830_CLK_EXCLK_DIV512] = {
+		"exclk_div512", CGU_CLK_FIXDIV,
+		.parents = { X1830_CLK_EXCLK },
+		.fixdiv = { 512 },
+	},
+
+	[X1830_CLK_RTC] = {
+		"rtc_ercs", CGU_CLK_MUX | CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK_DIV512, X1830_CLK_RTCLK },
+		.mux = { CGU_REG_OPCR, 2, 1},
+		.gate = { CGU_REG_CLKGR0, 29 },
+	},
+
+	/* Gate-only clocks */
+
+	[X1830_CLK_EMC] = {
+		"emc", CGU_CLK_GATE,
+		.parents = { X1830_CLK_AHB2, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 0 },
+	},
+
+	[X1830_CLK_EFUSE] = {
+		"efuse", CGU_CLK_GATE,
+		.parents = { X1830_CLK_AHB2, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 1 },
+	},
+
+	[X1830_CLK_OTG] = {
+		"otg", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 3 },
+	},
+
+	[X1830_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+
+	[X1830_CLK_SMB0] = {
+		"smb0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 7 },
+	},
+
+	[X1830_CLK_SMB1] = {
+		"smb1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+
+	[X1830_CLK_SMB2] = {
+		"smb2", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 9 },
+	},
+
+	[X1830_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+
+	[X1830_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+
+	[X1830_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+
+	[X1830_CLK_SFC] = {
+		"sfc", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+
+	[X1830_CLK_PDMA] = {
+		"pdma", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+
+	[X1830_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 30 },
+	},
+
+	[X1830_CLK_DTRNG] = {
+		"dtrng", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 1 },
+	},
+
+	[X1830_CLK_OST] = {
+		"ost", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 11 },
+	},
+};
+
+static void __init x1830_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(x1830_cgu_clocks,
+			      ARRAY_SIZE(x1830_cgu_clocks), np);
+	if (!cgu) {
+		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval) {
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+		return;
+	}
+
+	ingenic_cgu_register_syscore_ops(cgu);
+}
+/*
+ * CGU has some children devices, this is useful for probing children devices
+ * in the case where the device node is compatible with "simple-mfd".
+ */
+CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu", x1830_cgu_init);