Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 393 insertions, 0 deletions

diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c
new file mode 100644
index 000000000..72db90176
--- /dev/null
+++ b/drivers/crypto/caam/error.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CAAM Error Reporting
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ */
+
+#include "compat.h"
+#include "regs.h"
+#include "desc.h"
+#include "error.h"
+
+#ifdef DEBUG
+#include <linux/highmem.h>
+
+void caam_dump_sg(const char *prefix_str, int prefix_type,
+		  int rowsize, int groupsize, struct scatterlist *sg,
+		  size_t tlen, bool ascii)
+{
+	struct scatterlist *it;
+	void *it_page;
+	size_t len;
+	void *buf;
+
+	for (it = sg; it && tlen > 0 ; it = sg_next(it)) {
+		/*
+		 * make sure the scatterlist's page
+		 * has a valid virtual memory mapping
+		 */
+		it_page = kmap_atomic(sg_page(it));
+		if (unlikely(!it_page)) {
+			pr_err("caam_dump_sg: kmap failed\n");
+			return;
+		}
+
+		buf = it_page + it->offset;
+		len = min_t(size_t, tlen, it->length);
+		print_hex_dump_debug(prefix_str, prefix_type, rowsize,
+				     groupsize, buf, len, ascii);
+		tlen -= len;
+
+		kunmap_atomic(it_page);
+	}
+}
+#else
+void caam_dump_sg(const char *prefix_str, int prefix_type,
+		  int rowsize, int groupsize, struct scatterlist *sg,
+		  size_t tlen, bool ascii)
+{}
+#endif /* DEBUG */
+EXPORT_SYMBOL(caam_dump_sg);
+
+bool caam_little_end;
+EXPORT_SYMBOL(caam_little_end);
+
+bool caam_imx;
+EXPORT_SYMBOL(caam_imx);
+
+size_t caam_ptr_sz;
+EXPORT_SYMBOL(caam_ptr_sz);
+
+static const struct {
+	u8 value;
+	const char *error_text;
+} desc_error_list[] = {
+	{ 0x00, "No error." },
+	{ 0x01, "SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table." },
+	{ 0x02, "SGT Null Entry Error." },
+	{ 0x03, "Job Ring Control Error. There is a bad value in the Job Ring Control register." },
+	{ 0x04, "Invalid Descriptor Command. The Descriptor Command field is invalid." },
+	{ 0x05, "Reserved." },
+	{ 0x06, "Invalid KEY Command" },
+	{ 0x07, "Invalid LOAD Command" },
+	{ 0x08, "Invalid STORE Command" },
+	{ 0x09, "Invalid OPERATION Command" },
+	{ 0x0A, "Invalid FIFO LOAD Command" },
+	{ 0x0B, "Invalid FIFO STORE Command" },
+	{ 0x0C, "Invalid MOVE/MOVE_LEN Command" },
+	{ 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor." },
+	{ 0x0E, "Invalid MATH Command" },
+	{ 0x0F, "Invalid SIGNATURE Command" },
+	{ 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU." },
+	{ 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
+	{ 0x12, "Shared Descriptor Header Error" },
+	{ 0x13, "Header Error. Invalid length or parity, or certain other problems." },
+	{ 0x14, "Burster Error. Burster has gotten to an illegal state" },
+	{ 0x15, "Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)." },
+	{ 0x16, "DMA Error" },
+	{ 0x17, "Reserved." },
+	{ 0x1A, "Job failed due to JR reset" },
+	{ 0x1B, "Job failed due to Fail Mode" },
+	{ 0x1C, "DECO Watchdog timer timeout error" },
+	{ 0x1D, "DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked" },
+	{ 0x1E, "DECO attempted to copy data from a DECO that had an unmasked Descriptor error" },
+	{ 0x1F, "LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't." },
+	{ 0x20, "DECO has completed a reset initiated via the DRR register" },
+	{ 0x21, "Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used." },
+	{ 0x22, "Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)." },
+	{ 0x23, "Read Input Frame error" },
+	{ 0x24, "JDKEK, TDKEK or TDSK not loaded error" },
+	{ 0x80, "DNR (do not run) error" },
+	{ 0x81, "undefined protocol command" },
+	{ 0x82, "invalid setting in PDB" },
+	{ 0x83, "Anti-replay LATE error" },
+	{ 0x84, "Anti-replay REPLAY error" },
+	{ 0x85, "Sequence number overflow" },
+	{ 0x86, "Sigver invalid signature" },
+	{ 0x87, "DSA Sign Illegal test descriptor" },
+	{ 0x88, "Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data." },
+	{ 0x89, "Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used." },
+	{ 0xC1, "Blob Command error: Undefined mode" },
+	{ 0xC2, "Blob Command error: Secure Memory Blob mode error" },
+	{ 0xC4, "Blob Command error: Black Blob key or input size error" },
+	{ 0xC5, "Blob Command error: Invalid key destination" },
+	{ 0xC8, "Blob Command error: Trusted/Secure mode error" },
+	{ 0xF0, "IPsec TTL or hop limit field either came in as 0, or was decremented to 0" },
+	{ 0xF1, "3GPP HFN matches or exceeds the Threshold" },
+};
+
+static const struct {
+	u8 value;
+	const char *error_text;
+} qi_error_list[] = {
+	{ 0x00, "No error" },
+	{ 0x1F, "Job terminated by FQ or ICID flush" },
+	{ 0x20, "FD format error"},
+	{ 0x21, "FD command format error"},
+	{ 0x23, "FL format error"},
+	{ 0x25, "CRJD specified in FD, but not enabled in FLC"},
+	{ 0x30, "Max. buffer size too small"},
+	{ 0x31, "DHR exceeds max. buffer size (allocate mode, S/G format)"},
+	{ 0x32, "SGT exceeds max. buffer size (allocate mode, S/G format"},
+	{ 0x33, "Size over/underflow (allocate mode)"},
+	{ 0x34, "Size over/underflow (reuse mode)"},
+	{ 0x35, "Length exceeds max. short length (allocate mode, S/G/ format)"},
+	{ 0x36, "Memory footprint exceeds max. value (allocate mode, S/G/ format)"},
+	{ 0x41, "SBC frame format not supported (allocate mode)"},
+	{ 0x42, "Pool 0 invalid / pool 1 size < pool 0 size (allocate mode)"},
+	{ 0x43, "Annotation output enabled but ASAR = 0 (allocate mode)"},
+	{ 0x44, "Unsupported or reserved frame format or SGHR = 1 (reuse mode)"},
+	{ 0x45, "DHR correction underflow (reuse mode, single buffer format)"},
+	{ 0x46, "Annotation length exceeds offset (reuse mode)"},
+	{ 0x48, "Annotation output enabled but ASA limited by ASAR (reuse mode)"},
+	{ 0x49, "Data offset correction exceeds input frame data length (reuse mode)"},
+	{ 0x4B, "Annotation output enabled but ASA cannot be expanded (frame list)"},
+	{ 0x51, "Unsupported IF reuse mode"},
+	{ 0x52, "Unsupported FL use mode"},
+	{ 0x53, "Unsupported RJD use mode"},
+	{ 0x54, "Unsupported inline descriptor use mode"},
+	{ 0xC0, "Table buffer pool 0 depletion"},
+	{ 0xC1, "Table buffer pool 1 depletion"},
+	{ 0xC2, "Data buffer pool 0 depletion, no OF allocated"},
+	{ 0xC3, "Data buffer pool 1 depletion, no OF allocated"},
+	{ 0xC4, "Data buffer pool 0 depletion, partial OF allocated"},
+	{ 0xC5, "Data buffer pool 1 depletion, partial OF allocated"},
+	{ 0xD0, "FLC read error"},
+	{ 0xD1, "FL read error"},
+	{ 0xD2, "FL write error"},
+	{ 0xD3, "OF SGT write error"},
+	{ 0xD4, "PTA read error"},
+	{ 0xD5, "PTA write error"},
+	{ 0xD6, "OF SGT F-bit write error"},
+	{ 0xD7, "ASA write error"},
+	{ 0xE1, "FLC[ICR]=0 ICID error"},
+	{ 0xE2, "FLC[ICR]=1 ICID error"},
+	{ 0xE4, "source of ICID flush not trusted (BDI = 0)"},
+};
+
+static const char * const cha_id_list[] = {
+	"",
+	"AES",
+	"DES",
+	"ARC4",
+	"MDHA",
+	"RNG",
+	"SNOW f8",
+	"Kasumi f8/9",
+	"PKHA",
+	"CRCA",
+	"SNOW f9",
+	"ZUCE",
+	"ZUCA",
+};
+
+static const char * const err_id_list[] = {
+	"No error.",
+	"Mode error.",
+	"Data size error.",
+	"Key size error.",
+	"PKHA A memory size error.",
+	"PKHA B memory size error.",
+	"Data arrived out of sequence error.",
+	"PKHA divide-by-zero error.",
+	"PKHA modulus even error.",
+	"DES key parity error.",
+	"ICV check failed.",
+	"Hardware error.",
+	"Unsupported CCM AAD size.",
+	"Class 1 CHA is not reset",
+	"Invalid CHA combination was selected",
+	"Invalid CHA selected.",
+};
+
+static const char * const rng_err_id_list[] = {
+	"",
+	"",
+	"",
+	"Instantiate",
+	"Not instantiated",
+	"Test instantiate",
+	"Prediction resistance",
+	"Prediction resistance and test request",
+	"Uninstantiate",
+	"Secure key generation",
+	"",
+	"Hardware error",
+	"Continuous check"
+};
+
+static int report_ccb_status(struct device *jrdev, const u32 status,
+			     const char *error)
+{
+	u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
+		    JRSTA_CCBERR_CHAID_SHIFT;
+	u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
+	u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
+		  JRSTA_DECOERR_INDEX_SHIFT;
+	char *idx_str;
+	const char *cha_str = "unidentified cha_id value 0x";
+	char cha_err_code[3] = { 0 };
+	const char *err_str = "unidentified err_id value 0x";
+	char err_err_code[3] = { 0 };
+
+	if (status & JRSTA_DECOERR_JUMP)
+		idx_str = "jump tgt desc idx";
+	else
+		idx_str = "desc idx";
+
+	if (cha_id < ARRAY_SIZE(cha_id_list))
+		cha_str = cha_id_list[cha_id];
+	else
+		snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id);
+
+	if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG &&
+	    err_id < ARRAY_SIZE(rng_err_id_list) &&
+	    strlen(rng_err_id_list[err_id])) {
+		/* RNG-only error */
+		err_str = rng_err_id_list[err_id];
+	} else {
+		err_str = err_id_list[err_id];
+	}
+
+	/*
+	 * CCB ICV check failures are part of normal operation life;
+	 * we leave the upper layers to do what they want with them.
+	 */
+	if (err_id == JRSTA_CCBERR_ERRID_ICVCHK)
+		return -EBADMSG;
+
+	dev_err_ratelimited(jrdev, "%08x: %s: %s %d: %s%s: %s%s\n", status,
+			    error, idx_str, idx, cha_str, cha_err_code,
+			    err_str, err_err_code);
+
+	return -EINVAL;
+}
+
+static int report_jump_status(struct device *jrdev, const u32 status,
+			      const char *error)
+{
+	dev_err(jrdev, "%08x: %s: %s() not implemented\n",
+		status, error, __func__);
+
+	return -EINVAL;
+}
+
+static int report_deco_status(struct device *jrdev, const u32 status,
+			      const char *error)
+{
+	u8 err_id = status & JRSTA_DECOERR_ERROR_MASK;
+	u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
+		  JRSTA_DECOERR_INDEX_SHIFT;
+	char *idx_str;
+	const char *err_str = "unidentified error value 0x";
+	char err_err_code[3] = { 0 };
+	int i;
+
+	if (status & JRSTA_DECOERR_JUMP)
+		idx_str = "jump tgt desc idx";
+	else
+		idx_str = "desc idx";
+
+	for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
+		if (desc_error_list[i].value == err_id)
+			break;
+
+	if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text)
+		err_str = desc_error_list[i].error_text;
+	else
+		snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
+
+	dev_err(jrdev, "%08x: %s: %s %d: %s%s\n",
+		status, error, idx_str, idx, err_str, err_err_code);
+
+	return -EINVAL;
+}
+
+static int report_qi_status(struct device *qidev, const u32 status,
+			    const char *error)
+{
+	u8 err_id = status & JRSTA_QIERR_ERROR_MASK;
+	const char *err_str = "unidentified error value 0x";
+	char err_err_code[3] = { 0 };
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(qi_error_list); i++)
+		if (qi_error_list[i].value == err_id)
+			break;
+
+	if (i != ARRAY_SIZE(qi_error_list) && qi_error_list[i].error_text)
+		err_str = qi_error_list[i].error_text;
+	else
+		snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
+
+	dev_err(qidev, "%08x: %s: %s%s\n",
+		status, error, err_str, err_err_code);
+
+	return -EINVAL;
+}
+
+static int report_jr_status(struct device *jrdev, const u32 status,
+			    const char *error)
+{
+	dev_err(jrdev, "%08x: %s: %s() not implemented\n",
+		status, error, __func__);
+
+	return -EINVAL;
+}
+
+static int report_cond_code_status(struct device *jrdev, const u32 status,
+				   const char *error)
+{
+	dev_err(jrdev, "%08x: %s: %s() not implemented\n",
+		status, error, __func__);
+
+	return -EINVAL;
+}
+
+int caam_strstatus(struct device *jrdev, u32 status, bool qi_v2)
+{
+	static const struct stat_src {
+		int (*report_ssed)(struct device *jrdev, const u32 status,
+				   const char *error);
+		const char *error;
+	} status_src[16] = {
+		{ NULL, "No error" },
+		{ NULL, NULL },
+		{ report_ccb_status, "CCB" },
+		{ report_jump_status, "Jump" },
+		{ report_deco_status, "DECO" },
+		{ report_qi_status, "Queue Manager Interface" },
+		{ report_jr_status, "Job Ring" },
+		{ report_cond_code_status, "Condition Code" },
+		{ NULL, NULL },
+		{ NULL, NULL },
+		{ NULL, NULL },
+		{ NULL, NULL },
+		{ NULL, NULL },
+		{ NULL, NULL },
+		{ NULL, NULL },
+		{ NULL, NULL },
+	};
+	u32 ssrc = status >> JRSTA_SSRC_SHIFT;
+	const char *error = status_src[ssrc].error;
+
+	/*
+	 * If there is an error handling function, call it to report the error.
+	 * Otherwise print the error source name.
+	 */
+	if (status_src[ssrc].report_ssed)
+		return status_src[ssrc].report_ssed(jrdev, status, error);
+
+	if (error)
+		dev_err(jrdev, "%d: %s\n", ssrc, error);
+	else
+		dev_err(jrdev, "%d: unknown error source\n", ssrc);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(caam_strstatus);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FSL CAAM error reporting");
+MODULE_AUTHOR("Freescale Semiconductor");