Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 621 insertions, 0 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
new file mode 100644
index 000000000..0d4447df7
--- /dev/null
+++ b/drivers/iio/light/Kconfig
@@ -0,0 +1,621 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# Light sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Light sensors"
+
+config ACPI_ALS
+	tristate "ACPI Ambient Light Sensor"
+	depends on ACPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say Y here if you want to build a driver for the ACPI0008
+	  Ambient Light Sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called acpi-als.
+
+config ADJD_S311
+	tristate "ADJD-S311-CR999 digital color sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	  If you say yes here you get support for the Avago ADJD-S311-CR999
+	  digital color light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adjd_s311.
+
+config ADUX1020
+	tristate "ADUX1020 photometric sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Analog Devices
+	 ADUX1020 photometric sensor.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called adux1020.
+
+config AL3010
+	tristate "AL3010 ambient light sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Dyna Image AL3010
+	  ambient light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called al3010.
+
+config AL3320A
+	tristate "AL3320A ambient light sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Dyna Image AL3320A
+	  ambient light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called al3320a.
+
+config APDS9300
+	tristate "APDS9300 ambient light sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Avago APDS9300
+	  ambient light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apds9300.
+
+config APDS9960
+	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	depends on I2C
+	help
+	  Say Y here to build I2C interface support for the Avago
+	  APDS9960 gesture/RGB/ALS/proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apds9960
+
+config AS73211
+	tristate "AMS AS73211 XYZ color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the AMS AS73211
+	 JENCOLOR(R) Digital XYZ Sensor.
+
+	 For triggered measurements, you will need an additional trigger driver
+	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called as73211.
+
+config BH1750
+	tristate "ROHM BH1750 ambient light sensor"
+	depends on I2C
+	help
+	  Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
+	  BH1750, BH1751 ambient light sensors.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called bh1750.
+
+config BH1780
+	tristate "ROHM BH1780 ambient light sensor"
+	depends on I2C
+	help
+	  Say Y here to build support for the ROHM BH1780GLI ambient
+	  light sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called bh1780.
+
+config CM32181
+	depends on I2C
+	tristate "CM32181 driver"
+	help
+	  Say Y here if you use cm32181.
+	  This option enables ambient light sensor using
+	  Capella cm32181 device driver.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called cm32181.
+
+config CM3232
+	depends on I2C
+	tristate "CM3232 ambient light sensor"
+	help
+	  Say Y here if you use cm3232.
+	  This option enables ambient light sensor using
+	  Capella Microsystems cm3232 device driver.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called cm3232.
+
+config CM3323
+	depends on I2C
+	tristate "Capella CM3323 color light sensor"
+	help
+	  Say Y here if you want to build a driver for Capella CM3323
+	  color sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called cm3323.
+
+config CM3605
+	tristate "Capella CM3605 ambient light and proximity sensor"
+	help
+	  Say Y here if you want to build a driver for Capella CM3605
+	  ambient light and short range proximity sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called cm3605.
+
+config CM36651
+	depends on I2C
+	tristate "CM36651 driver"
+	help
+	  Say Y here if you use cm36651.
+	  This option enables proximity & RGB sensor using
+	  Capella cm36651 device driver.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called cm36651.
+
+config IIO_CROS_EC_LIGHT_PROX
+	tristate "ChromeOS EC Light and Proximity Sensors"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Say Y here if you use the light and proximity sensors
+	  presented by the ChromeOS EC Sensor hub.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called cros_ec_light_prox.
+
+config GP2AP002
+	tristate "Sharp GP2AP002 Proximity/ALS sensor"
+	depends on I2C
+	select REGMAP
+	help
+	  Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip
+	  hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gp2ap002.
+
+config GP2AP020A00F
+	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IRQ_WORK
+	help
+	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
+	  hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gp2ap020a00f.
+
+config IQS621_ALS
+	tristate "Azoteq IQS621/622 ambient light sensors"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS621
+	  and IQS622 ambient light sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs621-als.
+
+config SENSORS_ISL29018
+	tristate "Intersil 29018 light and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	default n
+	help
+	  If you say yes here you get support for ambient light sensing and
+	  proximity infrared sensing from Intersil ISL29018.
+	  This driver will provide the measurements of ambient light intensity
+	  in lux, proximity infrared sensing and normal infrared sensing.
+	  Data from sensor is accessible via sysfs.
+
+config SENSORS_ISL29028
+	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Provides driver for the Intersil's ISL29028 device.
+	  This driver supports the sysfs interface to get the ALS, IR intensity,
+	  Proximity value via iio. The ISL29028 provides the concurrent sensing
+	  of ambient light and proximity.
+
+config ISL29125
+	tristate "Intersil ISL29125 digital color light sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Intersil ISL29125
+	  RGB light sensor for I2C.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called isl29125.
+
+config HID_SENSOR_ALS
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID ALS"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Ambient light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-als.
+
+config HID_SENSOR_PROX
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID PROX"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-prox.
+
+config JSA1212
+	tristate "JSA1212 ALS and proximity sensor driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to build a IIO driver for JSA1212
+	  proximity & ALS sensor device.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called jsa1212.
+
+config RPR0521
+	tristate "ROHM RPR0521 ALS and proximity sensor driver"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build support for ROHM's RPR0521
+	  ambient light and proximity sensor device.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called rpr0521.
+
+config SENSORS_LM3533
+	tristate "LM3533 ambient light sensor"
+	depends on MFD_LM3533
+	help
+	  If you say yes here you get support for the ambient light sensor
+	  interface on National Semiconductor / TI LM3533 Lighting Power
+	  chips.
+
+	  The sensor interface can be used to control the LEDs and backlights
+	  of the chip through defining five light zones and three sets of
+	  corresponding output-current values.
+
+	  The driver provides raw and mean adc readings along with the current
+	  light zone through sysfs. A threshold event can be generated on zone
+	  changes. The ALS-control output values can be set per zone for the
+	  three current output channels.
+
+config LTR501
+	tristate "LTR-501ALS-01 light sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for the Lite-On LTR-501ALS-01
+	  ambient light and proximity sensor. This driver also supports LTR-559
+	  ALS/PS or LTR-301 ALS sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ltr501.
+
+config LTRF216A
+	tristate "Liteon LTRF216A Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say Y or M here, you get support for Liteon LTRF216A
+	  Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  ltrf216a.
+
+config LV0104CS
+	tristate "LV0104CS Ambient Light Sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build support for the On Semiconductor
+	  LV0104CS ambient light sensor.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called lv0104cs.
+
+config MAX44000
+	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build support for Maxim Integrated's
+	  MAX44000 ambient and infrared proximity sensor device.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called max44000.
+
+config MAX44009
+	tristate "MAX44009 Ambient Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Say Y here if you want to build support for Maxim Integrated's
+	 MAX44009 ambient light sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called max44009.
+
+config NOA1305
+	tristate "ON Semiconductor NOA1305 ambient light sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Say Y here if you want to build support for the ON Semiconductor
+	 NOA1305 ambient light sensor.
+
+	 To compile this driver as a module, choose M here:
+	 The module will be called noa1305.
+
+config OPT3001
+	tristate "Texas Instruments OPT3001 Light Sensor"
+	depends on I2C
+	help
+	  If you say Y or M here, you get support for Texas Instruments
+	  OPT3001 Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  opt3001.
+
+config PA12203001
+	tristate "TXC PA12203001 light and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TXC PA12203001
+	  ambient light and proximity sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pa12203001.
+
+config SI1133
+	tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	  help
+	  Say Y here if you want to build a driver for the Silicon Labs SI1133
+	  UV Index Sensor and Ambient Light Sensor chip.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called si1133.
+
+config SI1145
+	tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Silicon Labs SI1132 or
+	  SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
+	  chips.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called si1145.
+
+config STK3310
+	tristate "STK3310 ALS and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say yes here to get support for the Sensortek STK3310 ambient light
+	  and proximity sensor. The STK3311 model is also supported by this
+	  driver.
+
+	  Choosing M will build the driver as a module. If so, the module
+	  will be called stk3310.
+
+config ST_UVIS25
+	tristate "STMicroelectronics UVIS25 sensor driver"
+	depends on (I2C || SPI)
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select ST_UVIS25_I2C if (I2C)
+	select ST_UVIS25_SPI if (SPI_MASTER)
+	help
+	  Say yes here to build support for STMicroelectronics UVIS25
+	  uv sensor
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called st_uvis25.
+
+config ST_UVIS25_I2C
+	tristate
+	depends on ST_UVIS25
+	select REGMAP_I2C
+
+config ST_UVIS25_SPI
+	tristate
+	depends on ST_UVIS25
+	select REGMAP_SPI
+
+config TCS3414
+	tristate "TAOS TCS3414 digital color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for the TAOS TCS3414
+	  family of digital color sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tcs3414.
+
+config TCS3472
+	tristate "TAOS TCS3472 color light-to-digital converter"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for the TAOS TCS3472
+	  family of color light-to-digital converters with IR filter.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tcs3472.
+
+config SENSORS_TSL2563
+	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Taos TSL2560,
+	  TSL2561, TSL2562 and TSL2563 ambient light sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2563.
+
+config TSL2583
+	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
+	depends on I2C
+	help
+	  Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
+	  Access ALS data via iio, sysfs.
+
+config TSL2591
+        tristate "TAOS TSL2591 ambient light sensor"
+        depends on I2C
+        help
+          Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
+          featuring channels for combined visible + IR intensity and lux illuminance.
+          Access data via iio and sysfs. Supports iio_events.
+
+          To compile this driver as a module, select M: the
+          module will be called tsl2591.
+
+config TSL2772
+	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
+	depends on I2C
+	help
+	  Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
+	  tmd2672, tsl2772, tmd2772 devices.
+	  Provides iio_events and direct access via sysfs.
+
+config TSL4531
+	tristate "TAOS TSL4531 ambient light sensors"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the TAOS TSL4531 family
+	  of ambient light sensors with direct lux output.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsl4531.
+
+config US5182D
+	tristate "UPISEMI light and proximity sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for the UPISEMI US5182D
+	  ambient light and proximity sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called us5182d.
+
+config VCNL4000
+	tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VCNL4000,
+	  VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl4000.
+
+config VCNL4035
+	tristate "VCNL4035 combined ALS and proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VCNL4035,
+	  combined ambient light (ALS) and proximity sensor. Currently only ALS
+	  function is available.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl4035.
+
+config VEML6030
+	tristate "VEML6030 ambient light sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VEML6030
+	  ambient light sensor (ALS).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called veml6030.
+
+config VEML6070
+	tristate "VEML6070 UV A light sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VEML6070 UV A
+	  light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called veml6070.
+
+config VL6180
+	tristate "VL6180 ALS, range and proximity sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the STMicroelectronics
+	  VL6180 combined ambient light, range and proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vl6180.
+
+config ZOPT2201
+	tristate "ZOPT2201 ALS and UV B sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the IDT
+	  ZOPT2201 ambient light and UV B sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zopt2201.
+
+endmenu