Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 105 insertions, 0 deletions

diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h
new file mode 100644
index 000000000..1ec59483a
--- /dev/null
+++ b/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif