Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 442 insertions, 0 deletions

diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
new file mode 100644
index 000000000..a7e052c1d
--- /dev/null
+++ b/drivers/leds/leds-pca963x.c
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011 bct electronic GmbH
+ * Copyright 2013 Qtechnology/AS
+ *
+ * Author: Peter Meerwald <p.meerwald@bct-electronic.com>
+ * Author: Ricardo Ribalda <ribalda@kernel.org>
+ *
+ * Based on leds-pca955x.c
+ *
+ * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
+ * LED driver for the PCA9634/5 I2C LED driver (7-bit slave address set by hw.)
+ *
+ * Note that hardware blinking violates the leds infrastructure driver
+ * interface since the hardware only supports blinking all LEDs with the
+ * same delay_on/delay_off rates.  That is, only the LEDs that are set to
+ * blink will actually blink but all LEDs that are set to blink will blink
+ * in identical fashion.  The delay_on/delay_off values of the last LED
+ * that is set to blink will be used for all of the blinking LEDs.
+ * Hardware blinking is disabled by default but can be enabled by setting
+ * the 'blink_type' member in the platform_data struct to 'PCA963X_HW_BLINK'
+ * or by adding the 'nxp,hw-blink' property to the DTS.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define PCA963X_LED_OFF		0x0	/* LED driver off */
+#define PCA963X_LED_ON		0x1	/* LED driver on */
+#define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
+#define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
+
+#define PCA963X_MODE2_OUTDRV	0x04	/* Open-drain or totem pole */
+#define PCA963X_MODE2_INVRT	0x10	/* Normal or inverted direction */
+#define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
+
+#define PCA963X_MODE1		0x00
+#define PCA963X_MODE2		0x01
+#define PCA963X_PWM_BASE	0x02
+
+enum pca963x_type {
+	pca9633,
+	pca9634,
+	pca9635,
+};
+
+struct pca963x_chipdef {
+	u8			grppwm;
+	u8			grpfreq;
+	u8			ledout_base;
+	int			n_leds;
+	unsigned int		scaling;
+};
+
+static struct pca963x_chipdef pca963x_chipdefs[] = {
+	[pca9633] = {
+		.grppwm		= 0x6,
+		.grpfreq	= 0x7,
+		.ledout_base	= 0x8,
+		.n_leds		= 4,
+	},
+	[pca9634] = {
+		.grppwm		= 0xa,
+		.grpfreq	= 0xb,
+		.ledout_base	= 0xc,
+		.n_leds		= 8,
+	},
+	[pca9635] = {
+		.grppwm		= 0x12,
+		.grpfreq	= 0x13,
+		.ledout_base	= 0x14,
+		.n_leds		= 16,
+	},
+};
+
+/* Total blink period in milliseconds */
+#define PCA963X_BLINK_PERIOD_MIN	42
+#define PCA963X_BLINK_PERIOD_MAX	10667
+
+static const struct i2c_device_id pca963x_id[] = {
+	{ "pca9632", pca9633 },
+	{ "pca9633", pca9633 },
+	{ "pca9634", pca9634 },
+	{ "pca9635", pca9635 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca963x_id);
+
+struct pca963x;
+
+struct pca963x_led {
+	struct pca963x *chip;
+	struct led_classdev led_cdev;
+	int led_num; /* 0 .. 15 potentially */
+	bool blinking;
+	u8 gdc;
+	u8 gfrq;
+};
+
+struct pca963x {
+	struct pca963x_chipdef *chipdef;
+	struct mutex mutex;
+	struct i2c_client *client;
+	unsigned long leds_on;
+	struct pca963x_led leds[];
+};
+
+static int pca963x_brightness(struct pca963x_led *led,
+			      enum led_brightness brightness)
+{
+	struct i2c_client *client = led->chip->client;
+	struct pca963x_chipdef *chipdef = led->chip->chipdef;
+	u8 ledout_addr, ledout, mask, val;
+	int shift;
+	int ret;
+
+	ledout_addr = chipdef->ledout_base + (led->led_num / 4);
+	shift = 2 * (led->led_num % 4);
+	mask = 0x3 << shift;
+	ledout = i2c_smbus_read_byte_data(client, ledout_addr);
+
+	switch (brightness) {
+	case LED_FULL:
+		if (led->blinking) {
+			val = (ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift);
+			ret = i2c_smbus_write_byte_data(client,
+						PCA963X_PWM_BASE +
+						led->led_num,
+						LED_FULL);
+		} else {
+			val = (ledout & ~mask) | (PCA963X_LED_ON << shift);
+		}
+		ret = i2c_smbus_write_byte_data(client, ledout_addr, val);
+		break;
+	case LED_OFF:
+		val = ledout & ~mask;
+		ret = i2c_smbus_write_byte_data(client, ledout_addr, val);
+		led->blinking = false;
+		break;
+	default:
+		ret = i2c_smbus_write_byte_data(client,
+						PCA963X_PWM_BASE +
+						led->led_num,
+						brightness);
+		if (ret < 0)
+			return ret;
+
+		if (led->blinking)
+			val = (ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift);
+		else
+			val = (ledout & ~mask) | (PCA963X_LED_PWM << shift);
+
+		ret = i2c_smbus_write_byte_data(client, ledout_addr, val);
+		break;
+	}
+
+	return ret;
+}
+
+static void pca963x_blink(struct pca963x_led *led)
+{
+	struct i2c_client *client = led->chip->client;
+	struct pca963x_chipdef *chipdef = led->chip->chipdef;
+	u8 ledout_addr, ledout, mask, val, mode2;
+	int shift;
+
+	ledout_addr = chipdef->ledout_base + (led->led_num / 4);
+	shift = 2 * (led->led_num % 4);
+	mask = 0x3 << shift;
+	mode2 = i2c_smbus_read_byte_data(client, PCA963X_MODE2);
+
+	i2c_smbus_write_byte_data(client, chipdef->grppwm, led->gdc);
+
+	i2c_smbus_write_byte_data(client, chipdef->grpfreq, led->gfrq);
+
+	if (!(mode2 & PCA963X_MODE2_DMBLNK))
+		i2c_smbus_write_byte_data(client, PCA963X_MODE2,
+					  mode2 | PCA963X_MODE2_DMBLNK);
+
+	mutex_lock(&led->chip->mutex);
+
+	ledout = i2c_smbus_read_byte_data(client, ledout_addr);
+	if ((ledout & mask) != (PCA963X_LED_GRP_PWM << shift)) {
+		val = (ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift);
+		i2c_smbus_write_byte_data(client, ledout_addr, val);
+	}
+
+	mutex_unlock(&led->chip->mutex);
+	led->blinking = true;
+}
+
+static int pca963x_power_state(struct pca963x_led *led)
+{
+	struct i2c_client *client = led->chip->client;
+	unsigned long *leds_on = &led->chip->leds_on;
+	unsigned long cached_leds = *leds_on;
+
+	if (led->led_cdev.brightness)
+		set_bit(led->led_num, leds_on);
+	else
+		clear_bit(led->led_num, leds_on);
+
+	if (!(*leds_on) != !cached_leds)
+		return i2c_smbus_write_byte_data(client, PCA963X_MODE1,
+						 *leds_on ? 0 : BIT(4));
+
+	return 0;
+}
+
+static int pca963x_led_set(struct led_classdev *led_cdev,
+			   enum led_brightness value)
+{
+	struct pca963x_led *led;
+	int ret;
+
+	led = container_of(led_cdev, struct pca963x_led, led_cdev);
+
+	mutex_lock(&led->chip->mutex);
+
+	ret = pca963x_brightness(led, value);
+	if (ret < 0)
+		goto unlock;
+	ret = pca963x_power_state(led);
+
+unlock:
+	mutex_unlock(&led->chip->mutex);
+	return ret;
+}
+
+static unsigned int pca963x_period_scale(struct pca963x_led *led,
+					 unsigned int val)
+{
+	unsigned int scaling = led->chip->chipdef->scaling;
+
+	return scaling ? DIV_ROUND_CLOSEST(val * scaling, 1000) : val;
+}
+
+static int pca963x_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on, unsigned long *delay_off)
+{
+	unsigned long time_on, time_off, period;
+	struct pca963x_led *led;
+	u8 gdc, gfrq;
+
+	led = container_of(led_cdev, struct pca963x_led, led_cdev);
+
+	time_on = *delay_on;
+	time_off = *delay_off;
+
+	/* If both zero, pick reasonable defaults of 500ms each */
+	if (!time_on && !time_off) {
+		time_on = 500;
+		time_off = 500;
+	}
+
+	period = pca963x_period_scale(led, time_on + time_off);
+
+	/* If period not supported by hardware, default to someting sane. */
+	if ((period < PCA963X_BLINK_PERIOD_MIN) ||
+	    (period > PCA963X_BLINK_PERIOD_MAX)) {
+		time_on = 500;
+		time_off = 500;
+		period = pca963x_period_scale(led, 1000);
+	}
+
+	/*
+	 * From manual: duty cycle = (GDC / 256) ->
+	 *	(time_on / period) = (GDC / 256) ->
+	 *		GDC = ((time_on * 256) / period)
+	 */
+	gdc = (pca963x_period_scale(led, time_on) * 256) / period;
+
+	/*
+	 * From manual: period = ((GFRQ + 1) / 24) in seconds.
+	 * So, period (in ms) = (((GFRQ + 1) / 24) * 1000) ->
+	 *		GFRQ = ((period * 24 / 1000) - 1)
+	 */
+	gfrq = (period * 24 / 1000) - 1;
+
+	led->gdc = gdc;
+	led->gfrq = gfrq;
+
+	pca963x_blink(led);
+	led->led_cdev.brightness = LED_FULL;
+	pca963x_led_set(led_cdev, LED_FULL);
+
+	*delay_on = time_on;
+	*delay_off = time_off;
+
+	return 0;
+}
+
+static int pca963x_register_leds(struct i2c_client *client,
+				 struct pca963x *chip)
+{
+	struct pca963x_chipdef *chipdef = chip->chipdef;
+	struct pca963x_led *led = chip->leds;
+	struct device *dev = &client->dev;
+	struct fwnode_handle *child;
+	bool hw_blink;
+	s32 mode2;
+	u32 reg;
+	int ret;
+
+	if (device_property_read_u32(dev, "nxp,period-scale",
+				     &chipdef->scaling))
+		chipdef->scaling = 1000;
+
+	hw_blink = device_property_read_bool(dev, "nxp,hw-blink");
+
+	mode2 = i2c_smbus_read_byte_data(client, PCA963X_MODE2);
+	if (mode2 < 0)
+		return mode2;
+
+	/* default to open-drain unless totem pole (push-pull) is specified */
+	if (device_property_read_bool(dev, "nxp,totem-pole"))
+		mode2 |= PCA963X_MODE2_OUTDRV;
+	else
+		mode2 &= ~PCA963X_MODE2_OUTDRV;
+
+	/* default to non-inverted output, unless inverted is specified */
+	if (device_property_read_bool(dev, "nxp,inverted-out"))
+		mode2 |= PCA963X_MODE2_INVRT;
+	else
+		mode2 &= ~PCA963X_MODE2_INVRT;
+
+	ret = i2c_smbus_write_byte_data(client, PCA963X_MODE2, mode2);
+	if (ret < 0)
+		return ret;
+
+	device_for_each_child_node(dev, child) {
+		struct led_init_data init_data = {};
+		char default_label[32];
+
+		ret = fwnode_property_read_u32(child, "reg", &reg);
+		if (ret || reg >= chipdef->n_leds) {
+			dev_err(dev, "Invalid 'reg' property for node %pfw\n",
+				child);
+			ret = -EINVAL;
+			goto err;
+		}
+
+		led->led_num = reg;
+		led->chip = chip;
+		led->led_cdev.brightness_set_blocking = pca963x_led_set;
+		if (hw_blink)
+			led->led_cdev.blink_set = pca963x_blink_set;
+		led->blinking = false;
+
+		init_data.fwnode = child;
+		/* for backwards compatibility */
+		init_data.devicename = "pca963x";
+		snprintf(default_label, sizeof(default_label), "%d:%.2x:%u",
+			 client->adapter->nr, client->addr, reg);
+		init_data.default_label = default_label;
+
+		ret = devm_led_classdev_register_ext(dev, &led->led_cdev,
+						     &init_data);
+		if (ret) {
+			dev_err(dev, "Failed to register LED for node %pfw\n",
+				child);
+			goto err;
+		}
+
+		++led;
+	}
+
+	return 0;
+err:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static const struct of_device_id of_pca963x_match[] = {
+	{ .compatible = "nxp,pca9632", },
+	{ .compatible = "nxp,pca9633", },
+	{ .compatible = "nxp,pca9634", },
+	{ .compatible = "nxp,pca9635", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pca963x_match);
+
+static int pca963x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct pca963x_chipdef *chipdef;
+	struct pca963x *chip;
+	int i, count;
+
+	chipdef = &pca963x_chipdefs[id->driver_data];
+
+	count = device_get_child_node_count(dev);
+	if (!count || count > chipdef->n_leds) {
+		dev_err(dev, "Node %pfw must define between 1 and %d LEDs\n",
+			dev_fwnode(dev), chipdef->n_leds);
+		return -EINVAL;
+	}
+
+	chip = devm_kzalloc(dev, struct_size(chip, leds, count), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+
+	mutex_init(&chip->mutex);
+	chip->chipdef = chipdef;
+	chip->client = client;
+
+	/* Turn off LEDs by default*/
+	for (i = 0; i < chipdef->n_leds / 4; i++)
+		i2c_smbus_write_byte_data(client, chipdef->ledout_base + i, 0x00);
+
+	/* Disable LED all-call address, and power down initially */
+	i2c_smbus_write_byte_data(client, PCA963X_MODE1, BIT(4));
+
+	return pca963x_register_leds(client, chip);
+}
+
+static struct i2c_driver pca963x_driver = {
+	.driver = {
+		.name	= "leds-pca963x",
+		.of_match_table = of_pca963x_match,
+	},
+	.probe	= pca963x_probe,
+	.id_table = pca963x_id,
+};
+
+module_i2c_driver(pca963x_driver);
+
+MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
+MODULE_DESCRIPTION("PCA963X LED driver");
+MODULE_LICENSE("GPL v2");