Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 195 insertions, 0 deletions

diff --git a/drivers/media/pci/solo6x10/solo6x10-gpio.c b/drivers/media/pci/solo6x10/solo6x10-gpio.c
new file mode 100644
index 000000000..084c30760
--- /dev/null
+++ b/drivers/media/pci/solo6x10/solo6x10-gpio.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <https://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
+#include "solo6x10.h"
+
+static void solo_gpio_mode(struct solo_dev *solo_dev,
+			   unsigned int port_mask, unsigned int mode)
+{
+	int port;
+	unsigned int ret;
+
+	ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_0);
+
+	/* To set gpio */
+	for (port = 0; port < 16; port++) {
+		if (!((1 << port) & port_mask))
+			continue;
+
+		ret &= (~(3 << (port << 1)));
+		ret |= ((mode & 3) << (port << 1));
+	}
+
+	solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_0, ret);
+
+	/* To set extended gpio - sensor */
+	ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_1);
+
+	for (port = 0; port < 16; port++) {
+		if (!((1UL << (port + 16)) & port_mask))
+			continue;
+
+		if (!mode)
+			ret &= ~(1UL << port);
+		else
+			ret |= 1UL << port;
+	}
+
+	/* Enable GPIO[31:16] */
+	ret |= 0xffff0000;
+
+	solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_1, ret);
+}
+
+static void solo_gpio_set(struct solo_dev *solo_dev, unsigned int value)
+{
+	solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
+		       solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) | value);
+}
+
+static void solo_gpio_clear(struct solo_dev *solo_dev, unsigned int value)
+{
+	solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
+		       solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) & ~value);
+}
+
+static void solo_gpio_config(struct solo_dev *solo_dev)
+{
+	/* Video reset */
+	solo_gpio_mode(solo_dev, 0x30, 1);
+	solo_gpio_clear(solo_dev, 0x30);
+	udelay(100);
+	solo_gpio_set(solo_dev, 0x30);
+	udelay(100);
+
+	/* Warning: Don't touch the next line unless you're sure of what
+	 * you're doing: first four gpio [0-3] are used for video. */
+	solo_gpio_mode(solo_dev, 0x0f, 2);
+
+	/* We use bit 8-15 of SOLO_GPIO_CONFIG_0 for relay purposes */
+	solo_gpio_mode(solo_dev, 0xff00, 1);
+
+	/* Initially set relay status to 0 */
+	solo_gpio_clear(solo_dev, 0xff00);
+
+	/* Set input pins direction */
+	solo_gpio_mode(solo_dev, 0xffff0000, 0);
+}
+
+#ifdef CONFIG_GPIOLIB
+/* Pins 0-7 are not exported, because it seems from code above they are
+ * used for internal purposes. So offset 0 corresponds to pin 8, therefore
+ * offsets 0-7 are relay GPIOs, 8-23 - input GPIOs.
+ */
+static int solo_gpiochip_get_direction(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	int ret, mode;
+	struct solo_dev *solo_dev = gpiochip_get_data(chip);
+
+	if (offset < 8) {
+		ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_0);
+		mode = 3 & (ret >> ((offset + 8) * 2));
+	} else {
+		ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_1);
+		mode =  1 & (ret >> (offset - 8));
+	}
+
+	if (!mode)
+		return 1;
+	else if (mode == 1)
+		return 0;
+
+	return -1;
+}
+
+static int solo_gpiochip_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	return -1;
+}
+
+static int solo_gpiochip_direction_output(struct gpio_chip *chip,
+					  unsigned int offset, int value)
+{
+	return -1;
+}
+
+static int solo_gpiochip_get(struct gpio_chip *chip,
+						unsigned int offset)
+{
+	int ret;
+	struct solo_dev *solo_dev = gpiochip_get_data(chip);
+
+	ret = solo_reg_read(solo_dev, SOLO_GPIO_DATA_IN);
+
+	return 1 & (ret >> (offset + 8));
+}
+
+static void solo_gpiochip_set(struct gpio_chip *chip,
+						unsigned int offset, int value)
+{
+	struct solo_dev *solo_dev = gpiochip_get_data(chip);
+
+	if (value)
+		solo_gpio_set(solo_dev, 1 << (offset + 8));
+	else
+		solo_gpio_clear(solo_dev, 1 << (offset + 8));
+}
+#endif
+
+int solo_gpio_init(struct solo_dev *solo_dev)
+{
+#ifdef CONFIG_GPIOLIB
+	int ret;
+#endif
+
+	solo_gpio_config(solo_dev);
+#ifdef CONFIG_GPIOLIB
+	solo_dev->gpio_dev.label = SOLO6X10_NAME"_gpio";
+	solo_dev->gpio_dev.parent = &solo_dev->pdev->dev;
+	solo_dev->gpio_dev.owner = THIS_MODULE;
+	solo_dev->gpio_dev.base = -1;
+	solo_dev->gpio_dev.ngpio = 24;
+	solo_dev->gpio_dev.can_sleep = 0;
+
+	solo_dev->gpio_dev.get_direction = solo_gpiochip_get_direction;
+	solo_dev->gpio_dev.direction_input = solo_gpiochip_direction_input;
+	solo_dev->gpio_dev.direction_output = solo_gpiochip_direction_output;
+	solo_dev->gpio_dev.get = solo_gpiochip_get;
+	solo_dev->gpio_dev.set = solo_gpiochip_set;
+
+	ret = gpiochip_add_data(&solo_dev->gpio_dev, solo_dev);
+
+	if (ret) {
+		solo_dev->gpio_dev.label = NULL;
+		return -1;
+	}
+#endif
+	return 0;
+}
+
+void solo_gpio_exit(struct solo_dev *solo_dev)
+{
+#ifdef CONFIG_GPIOLIB
+	if (solo_dev->gpio_dev.label) {
+		gpiochip_remove(&solo_dev->gpio_dev);
+		solo_dev->gpio_dev.label = NULL;
+	}
+#endif
+	solo_gpio_clear(solo_dev, 0x30);
+	solo_gpio_config(solo_dev);
+}