Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 330 insertions, 0 deletions

diff --git a/drivers/media/usb/gspca/sq905c.c b/drivers/media/usb/gspca/sq905c.c
new file mode 100644
index 000000000..6ca947aef
--- /dev/null
+++ b/drivers/media/usb/gspca/sq905c.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SQ905C subdriver
+ *
+ * Copyright (C) 2009 Theodore Kilgore
+ */
+
+/*
+ *
+ * This driver uses work done in
+ * libgphoto2/camlibs/digigr8, Copyright (C) Theodore Kilgore.
+ *
+ * This driver has also used as a base the sq905c driver
+ * and may contain code fragments from it.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define MODULE_NAME "sq905c"
+
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include "gspca.h"
+
+MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>");
+MODULE_DESCRIPTION("GSPCA/SQ905C USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* Default timeouts, in ms */
+#define SQ905C_CMD_TIMEOUT 500
+#define SQ905C_DATA_TIMEOUT 1000
+
+/* Maximum transfer size to use. */
+#define SQ905C_MAX_TRANSFER 0x8000
+
+#define FRAME_HEADER_LEN 0x50
+
+/* Commands. These go in the "value" slot. */
+#define SQ905C_CLEAR   0xa0		/* clear everything */
+#define SQ905C_GET_ID  0x14f4		/* Read version number */
+#define SQ905C_CAPTURE_LOW 0xa040	/* Starts capture at 160x120 */
+#define SQ905C_CAPTURE_MED 0x1440	/* Starts capture at 320x240 */
+#define SQ905C_CAPTURE_HI 0x2840	/* Starts capture at 320x240 */
+
+/* For capture, this must go in the "index" slot. */
+#define SQ905C_CAPTURE_INDEX 0x110f
+
+/* Structure to hold all of our device specific stuff */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+	const struct v4l2_pix_format *cap_mode;
+	/* Driver stuff */
+	struct work_struct work_struct;
+	struct workqueue_struct *work_thread;
+};
+
+/*
+ * Most of these cameras will do 640x480 and 320x240. 160x120 works
+ * in theory but gives very poor output. Therefore, not supported.
+ * The 0x2770:0x9050 cameras have max resolution of 320x240.
+ */
+static struct v4l2_pix_format sq905c_mode[] = {
+	{ 320, 240, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+	{ 640, 480, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0}
+};
+
+/* Send a command to the camera. */
+static int sq905c_command(struct gspca_dev *gspca_dev, u16 command, u16 index)
+{
+	int ret;
+
+	ret = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      USB_REQ_SYNCH_FRAME,                /* request */
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      command, index, NULL, 0,
+			      SQ905C_CMD_TIMEOUT);
+	if (ret < 0) {
+		pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index,
+		       int size)
+{
+	int ret;
+
+	ret = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0),
+			      USB_REQ_SYNCH_FRAME,		/* request */
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      command, index, gspca_dev->usb_buf, size,
+			      SQ905C_CMD_TIMEOUT);
+	if (ret < 0) {
+		pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * This function is called as a workqueue function and runs whenever the camera
+ * is streaming data. Because it is a workqueue function it is allowed to sleep
+ * so we can use synchronous USB calls. To avoid possible collisions with other
+ * threads attempting to use gspca_dev->usb_buf we take the usb_lock when
+ * performing USB operations using it. In practice we don't really need this
+ * as the camera doesn't provide any controls.
+ */
+static void sq905c_dostream(struct work_struct *work)
+{
+	struct sd *dev = container_of(work, struct sd, work_struct);
+	struct gspca_dev *gspca_dev = &dev->gspca_dev;
+	int bytes_left; /* bytes remaining in current frame. */
+	int data_len;   /* size to use for the next read. */
+	int act_len;
+	int packet_type;
+	int ret;
+	u8 *buffer;
+
+	buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL);
+	if (!buffer) {
+		pr_err("Couldn't allocate USB buffer\n");
+		goto quit_stream;
+	}
+
+	while (gspca_dev->present && gspca_dev->streaming) {
+#ifdef CONFIG_PM
+		if (gspca_dev->frozen)
+			break;
+#endif
+		/* Request the header, which tells the size to download */
+		ret = usb_bulk_msg(gspca_dev->dev,
+				usb_rcvbulkpipe(gspca_dev->dev, 0x81),
+				buffer, FRAME_HEADER_LEN, &act_len,
+				SQ905C_DATA_TIMEOUT);
+		gspca_dbg(gspca_dev, D_STREAM,
+			  "Got %d bytes out of %d for header\n",
+			  act_len, FRAME_HEADER_LEN);
+		if (ret < 0 || act_len < FRAME_HEADER_LEN)
+			goto quit_stream;
+		/* size is read from 4 bytes starting 0x40, little endian */
+		bytes_left = buffer[0x40]|(buffer[0x41]<<8)|(buffer[0x42]<<16)
+					|(buffer[0x43]<<24);
+		gspca_dbg(gspca_dev, D_STREAM, "bytes_left = 0x%x\n",
+			  bytes_left);
+		/* We keep the header. It has other information, too. */
+		packet_type = FIRST_PACKET;
+		gspca_frame_add(gspca_dev, packet_type,
+				buffer, FRAME_HEADER_LEN);
+		while (bytes_left > 0 && gspca_dev->present) {
+			data_len = bytes_left > SQ905C_MAX_TRANSFER ?
+				SQ905C_MAX_TRANSFER : bytes_left;
+			ret = usb_bulk_msg(gspca_dev->dev,
+				usb_rcvbulkpipe(gspca_dev->dev, 0x81),
+				buffer, data_len, &act_len,
+				SQ905C_DATA_TIMEOUT);
+			if (ret < 0 || act_len < data_len)
+				goto quit_stream;
+			gspca_dbg(gspca_dev, D_STREAM,
+				  "Got %d bytes out of %d for frame\n",
+				  data_len, bytes_left);
+			bytes_left -= data_len;
+			if (bytes_left == 0)
+				packet_type = LAST_PACKET;
+			else
+				packet_type = INTER_PACKET;
+			gspca_frame_add(gspca_dev, packet_type,
+					buffer, data_len);
+		}
+	}
+quit_stream:
+	if (gspca_dev->present) {
+		mutex_lock(&gspca_dev->usb_lock);
+		sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
+		mutex_unlock(&gspca_dev->usb_lock);
+	}
+	kfree(buffer);
+}
+
+/* This function is called at probe time just before sd_init */
+static int sd_config(struct gspca_dev *gspca_dev,
+		const struct usb_device_id *id)
+{
+	struct cam *cam = &gspca_dev->cam;
+	struct sd *dev = (struct sd *) gspca_dev;
+	int ret;
+
+	gspca_dbg(gspca_dev, D_PROBE,
+		  "SQ9050 camera detected (vid/pid 0x%04X:0x%04X)\n",
+		  id->idVendor, id->idProduct);
+
+	ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
+	if (ret < 0) {
+		gspca_err(gspca_dev, "Get version command failed\n");
+		return ret;
+	}
+
+	ret = sq905c_read(gspca_dev, 0xf5, 0, 20);
+	if (ret < 0) {
+		gspca_err(gspca_dev, "Reading version command failed\n");
+		return ret;
+	}
+	/* Note we leave out the usb id and the manufacturing date */
+	gspca_dbg(gspca_dev, D_PROBE,
+		  "SQ9050 ID string: %02x - %*ph\n",
+		  gspca_dev->usb_buf[3], 6, gspca_dev->usb_buf + 14);
+
+	cam->cam_mode = sq905c_mode;
+	cam->nmodes = 2;
+	if (gspca_dev->usb_buf[15] == 0)
+		cam->nmodes = 1;
+	/* We don't use the buffer gspca allocates so make it small. */
+	cam->bulk_size = 32;
+	cam->bulk = 1;
+	INIT_WORK(&dev->work_struct, sq905c_dostream);
+	return 0;
+}
+
+/* called on streamoff with alt==0 and on disconnect */
+/* the usb_lock is held at entry - restore on exit */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct sd *dev = (struct sd *) gspca_dev;
+
+	/* wait for the work queue to terminate */
+	mutex_unlock(&gspca_dev->usb_lock);
+	/* This waits for sq905c_dostream to finish */
+	destroy_workqueue(dev->work_thread);
+	dev->work_thread = NULL;
+	mutex_lock(&gspca_dev->usb_lock);
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	/* connect to the camera and reset it. */
+	return sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
+}
+
+/* Set up for getting frames. */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *dev = (struct sd *) gspca_dev;
+	int ret;
+
+	dev->cap_mode = gspca_dev->cam.cam_mode;
+	/* "Open the shutter" and set size, to start capture */
+	switch (gspca_dev->pixfmt.width) {
+	case 640:
+		gspca_dbg(gspca_dev, D_STREAM, "Start streaming at high resolution\n");
+		dev->cap_mode++;
+		ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_HI,
+						SQ905C_CAPTURE_INDEX);
+		break;
+	default: /* 320 */
+		gspca_dbg(gspca_dev, D_STREAM, "Start streaming at medium resolution\n");
+		ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_MED,
+						SQ905C_CAPTURE_INDEX);
+	}
+
+	if (ret < 0) {
+		gspca_err(gspca_dev, "Start streaming command failed\n");
+		return ret;
+	}
+	/* Start the workqueue function to do the streaming */
+	dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
+	if (!dev->work_thread)
+		return -ENOMEM;
+
+	queue_work(dev->work_thread, &dev->work_struct);
+
+	return 0;
+}
+
+/* Table of supported USB devices */
+static const struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x2770, 0x905c)},
+	{USB_DEVICE(0x2770, 0x9050)},
+	{USB_DEVICE(0x2770, 0x9051)},
+	{USB_DEVICE(0x2770, 0x9052)},
+	{USB_DEVICE(0x2770, 0x913d)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name   = MODULE_NAME,
+	.config = sd_config,
+	.init   = sd_init,
+	.start  = sd_start,
+	.stop0  = sd_stop0,
+};
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id,
+			&sd_desc,
+			sizeof(struct sd),
+			THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name       = MODULE_NAME,
+	.id_table   = device_table,
+	.probe      = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume  = gspca_resume,
+	.reset_resume = gspca_resume,
+#endif
+};
+
+module_usb_driver(sd_driver);