Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 381 insertions, 0 deletions

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h
new file mode 100644
index 000000000..7c998ca61
--- /dev/null
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h
@@ -0,0 +1,381 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *
+ *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
+ */
+#ifndef __PVRUSB2_HDW_INTERNAL_H
+#define __PVRUSB2_HDW_INTERNAL_H
+
+/*
+
+  This header sets up all the internal structures and definitions needed to
+  track and coordinate the driver's interaction with the hardware.  ONLY
+  source files which actually implement part of that whole circus should be
+  including this header.  Higher levels, like the external layers to the
+  various public APIs (V4L, sysfs, etc) should NOT ever include this
+  private, internal header.  This means that pvrusb2-hdw, pvrusb2-encoder,
+  etc will include this, but pvrusb2-v4l should not.
+
+*/
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include "pvrusb2-hdw.h"
+#include "pvrusb2-io.h"
+#include <media/v4l2-device.h>
+#include <media/drv-intf/cx2341x.h>
+#include <media/i2c/ir-kbd-i2c.h>
+#include "pvrusb2-devattr.h"
+
+/* Legal values for PVR2_CID_HSM */
+#define PVR2_CVAL_HSM_FAIL 0
+#define PVR2_CVAL_HSM_FULL 1
+#define PVR2_CVAL_HSM_HIGH 2
+
+#define PVR2_VID_ENDPOINT        0x84
+#define PVR2_UNK_ENDPOINT        0x86    /* maybe raw yuv ? */
+#define PVR2_VBI_ENDPOINT        0x88
+
+#define PVR2_CTL_BUFFSIZE        64
+
+#define FREQTABLE_SIZE 500
+
+#define LOCK_TAKE(x) do { mutex_lock(&x##_mutex); x##_held = !0; } while (0)
+#define LOCK_GIVE(x) do { x##_held = 0; mutex_unlock(&x##_mutex); } while (0)
+
+typedef int (*pvr2_ctlf_is_dirty)(struct pvr2_ctrl *);
+typedef void (*pvr2_ctlf_clear_dirty)(struct pvr2_ctrl *);
+typedef int (*pvr2_ctlf_check_value)(struct pvr2_ctrl *,int);
+typedef int (*pvr2_ctlf_get_value)(struct pvr2_ctrl *,int *);
+typedef int (*pvr2_ctlf_set_value)(struct pvr2_ctrl *,int msk,int val);
+typedef int (*pvr2_ctlf_val_to_sym)(struct pvr2_ctrl *,int msk,int val,
+				    char *,unsigned int,unsigned int *);
+typedef int (*pvr2_ctlf_sym_to_val)(struct pvr2_ctrl *,
+				    const char *,unsigned int,
+				    int *mskp,int *valp);
+typedef unsigned int (*pvr2_ctlf_get_v4lflags)(struct pvr2_ctrl *);
+
+/* This structure describes a specific control.  A table of these is set up
+   in pvrusb2-hdw.c. */
+struct pvr2_ctl_info {
+	/* Control's name suitable for use as an identifier */
+	const char *name;
+
+	/* Short description of control */
+	const char *desc;
+
+	/* Control's implementation */
+	pvr2_ctlf_get_value get_value;      /* Get its value */
+	pvr2_ctlf_get_value get_def_value;  /* Get its default value */
+	pvr2_ctlf_get_value get_min_value;  /* Get minimum allowed value */
+	pvr2_ctlf_get_value get_max_value;  /* Get maximum allowed value */
+	pvr2_ctlf_set_value set_value;      /* Set its value */
+	pvr2_ctlf_check_value check_value;  /* Check that value is valid */
+	pvr2_ctlf_val_to_sym val_to_sym;    /* Custom convert value->symbol */
+	pvr2_ctlf_sym_to_val sym_to_val;    /* Custom convert symbol->value */
+	pvr2_ctlf_is_dirty is_dirty;        /* Return true if dirty */
+	pvr2_ctlf_clear_dirty clear_dirty;  /* Clear dirty state */
+	pvr2_ctlf_get_v4lflags get_v4lflags;/* Retrieve v4l flags */
+
+	/* Control's type (int, enum, bitmask) */
+	enum pvr2_ctl_type type;
+
+	/* Associated V4L control ID, if any */
+	int v4l_id;
+
+	/* Associated driver internal ID, if any */
+	int internal_id;
+
+	/* Don't implicitly initialize this control's value */
+	int skip_init;
+
+	/* Starting value for this control */
+	int default_value;
+
+	/* Type-specific control information */
+	union {
+		struct { /* Integer control */
+			long min_value; /* lower limit */
+			long max_value; /* upper limit */
+		} type_int;
+		struct { /* enumerated control */
+			unsigned int count;       /* enum value count */
+			const char * const *value_names; /* symbol names */
+		} type_enum;
+		struct { /* bitmask control */
+			unsigned int valid_bits; /* bits in use */
+			const char **bit_names;  /* symbol name/bit */
+		} type_bitmask;
+	} def;
+};
+
+
+/* Same as pvr2_ctl_info, but includes storage for the control description */
+#define PVR2_CTLD_INFO_DESC_SIZE 32
+struct pvr2_ctld_info {
+	struct pvr2_ctl_info info;
+	char desc[PVR2_CTLD_INFO_DESC_SIZE];
+};
+
+struct pvr2_ctrl {
+	const struct pvr2_ctl_info *info;
+	struct pvr2_hdw *hdw;
+};
+
+
+
+/* Disposition of firmware1 loading situation */
+#define FW1_STATE_UNKNOWN 0
+#define FW1_STATE_MISSING 1
+#define FW1_STATE_FAILED 2
+#define FW1_STATE_RELOAD 3
+#define FW1_STATE_OK 4
+
+/* What state the device is in if it is a hybrid */
+#define PVR2_PATHWAY_UNKNOWN 0
+#define PVR2_PATHWAY_ANALOG 1
+#define PVR2_PATHWAY_DIGITAL 2
+
+typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16);
+#define PVR2_I2C_FUNC_CNT 128
+
+/* This structure contains all state data directly needed to
+   manipulate the hardware (as opposed to complying with a kernel
+   interface) */
+struct pvr2_hdw {
+	/* Underlying USB device handle */
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_intf;
+
+	/* Our handle into the v4l2 sub-device architecture */
+	struct v4l2_device v4l2_dev;
+	/* Device description, anything that must adjust behavior based on
+	   device specific info will use information held here. */
+	const struct pvr2_device_desc *hdw_desc;
+
+	/* Kernel worker thread handling */
+	struct work_struct workpoll;     /* Update driver state */
+
+	/* Video spigot */
+	struct pvr2_stream *vid_stream;
+
+	/* Mutex for all hardware state control */
+	struct mutex big_lock_mutex;
+	int big_lock_held;  /* For debugging */
+
+	/* This is a simple string which identifies the instance of this
+	   driver.  It is unique within the set of existing devices, but
+	   there is no attempt to keep the name consistent with the same
+	   physical device each time. */
+	char name[32];
+
+	/* This is a simple string which identifies the physical device
+	   instance itself - if possible.  (If not possible, then it is
+	   based on the specific driver instance, similar to name above.)
+	   The idea here is that userspace might hopefully be able to use
+	   this recognize specific tuners.  It will encode a serial number,
+	   if available. */
+	char identifier[32];
+
+	/* I2C stuff */
+	struct i2c_adapter i2c_adap;
+	struct i2c_algorithm i2c_algo;
+	pvr2_i2c_func i2c_func[PVR2_I2C_FUNC_CNT];
+	int i2c_cx25840_hack_state;
+	int i2c_linked;
+
+	/* IR related */
+	unsigned int ir_scheme_active; /* IR scheme as seen from the outside */
+	struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */
+
+	/* Frequency table */
+	unsigned int freqTable[FREQTABLE_SIZE];
+	unsigned int freqProgSlot;
+
+	/* Stuff for handling low level control interaction with device */
+	struct mutex ctl_lock_mutex;
+	int ctl_lock_held;  /* For debugging */
+	struct urb *ctl_write_urb;
+	struct urb *ctl_read_urb;
+	unsigned char *ctl_write_buffer;
+	unsigned char *ctl_read_buffer;
+	int ctl_write_pend_flag;
+	int ctl_read_pend_flag;
+	int ctl_timeout_flag;
+	struct completion ctl_done;
+	unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE];
+	int cmd_debug_state;               // Low level command debugging info
+	unsigned char cmd_debug_code;      //
+	unsigned int cmd_debug_write_len;  //
+	unsigned int cmd_debug_read_len;   //
+
+	/* Bits of state that describe what is going on with various parts
+	   of the driver. */
+	int state_pathway_ok;         /* Pathway config is ok */
+	int state_encoder_ok;         /* Encoder is operational */
+	int state_encoder_run;        /* Encoder is running */
+	int state_encoder_config;     /* Encoder is configured */
+	int state_encoder_waitok;     /* Encoder pre-wait done */
+	int state_encoder_runok;      /* Encoder has run for >= .25 sec */
+	int state_decoder_run;        /* Decoder is running */
+	int state_decoder_ready;      /* Decoder is stabilized & streamable */
+	int state_usbstream_run;      /* FX2 is streaming */
+	int state_decoder_quiescent;  /* Decoder idle for minimal interval */
+	int state_pipeline_config;    /* Pipeline is configured */
+	int state_pipeline_req;       /* Somebody wants to stream */
+	int state_pipeline_pause;     /* Pipeline must be paused */
+	int state_pipeline_idle;      /* Pipeline not running */
+
+	/* This is the master state of the driver.  It is the combined
+	   result of other bits of state.  Examining this will indicate the
+	   overall state of the driver.  Values here are one of
+	   PVR2_STATE_xxxx */
+	unsigned int master_state;
+
+	/* True if device led is currently on */
+	int led_on;
+
+	/* True if states must be re-evaluated */
+	int state_stale;
+
+	void (*state_func)(void *);
+	void *state_data;
+
+	/* Timer for measuring required decoder settling time before we're
+	   allowed to fire it up again. */
+	struct timer_list quiescent_timer;
+
+	/* Timer for measuring decoder stabilization time, which is the
+	   amount of time we need to let the decoder run before we can
+	   trust its output (otherwise the encoder might see garbage and
+	   then fail to start correctly). */
+	struct timer_list decoder_stabilization_timer;
+
+	/* Timer for measuring encoder pre-wait time */
+	struct timer_list encoder_wait_timer;
+
+	/* Timer for measuring encoder minimum run time */
+	struct timer_list encoder_run_timer;
+
+	/* Place to block while waiting for state changes */
+	wait_queue_head_t state_wait_data;
+
+
+	int force_dirty;        /* consider all controls dirty if true */
+	int flag_ok;            /* device in known good state */
+	int flag_modulefail;    /* true if at least one module failed to load */
+	int flag_disconnected;  /* flag_ok == 0 due to disconnect */
+	int flag_init_ok;       /* true if structure is fully initialized */
+	int fw1_state;          /* current situation with fw1 */
+	int pathway_state;      /* one of PVR2_PATHWAY_xxx */
+	int flag_decoder_missed;/* We've noticed missing decoder */
+	int flag_tripped;       /* Indicates overall failure to start */
+
+	unsigned int decoder_client_id;
+
+	// CPU firmware info (used to help find / save firmware data)
+	char *fw_buffer;
+	unsigned int fw_size;
+	int fw_cpu_flag; /* True if we are dealing with the CPU */
+
+	/* Tuner / frequency control stuff */
+	unsigned int tuner_type;
+	int tuner_updated;
+	unsigned int freqValTelevision;  /* Current freq for tv mode */
+	unsigned int freqValRadio;       /* Current freq for radio mode */
+	unsigned int freqSlotTelevision; /* Current slot for tv mode */
+	unsigned int freqSlotRadio;      /* Current slot for radio mode */
+	unsigned int freqSelector;       /* 0=radio 1=television */
+	int freqDirty;
+
+	/* Current tuner info - this information is polled from the I2C bus */
+	struct v4l2_tuner tuner_signal_info;
+	int tuner_signal_stale;
+
+	/* Cropping capability info */
+	struct v4l2_cropcap cropcap_info;
+	int cropcap_stale;
+
+	/* Video standard handling */
+	v4l2_std_id std_mask_eeprom; // Hardware supported selections
+	v4l2_std_id std_mask_avail;  // Which standards we may select from
+	v4l2_std_id std_mask_cur;    // Currently selected standard(s)
+	int std_enum_cur;            // selected standard enumeration value
+	int std_dirty;               // True if std_mask_cur has changed
+	struct pvr2_ctl_info std_info_enum;
+	struct pvr2_ctl_info std_info_avail;
+	struct pvr2_ctl_info std_info_cur;
+	struct pvr2_ctl_info std_info_detect;
+
+	// Generated string names, one per actual V4L2 standard
+	const char *std_mask_ptrs[32];
+	char std_mask_names[32][16];
+
+	int unit_number;             /* ID for driver instance */
+	unsigned long serial_number; /* ID for hardware itself */
+
+	char bus_info[32]; /* Bus location info */
+
+	/* Minor numbers used by v4l logic (yes, this is a hack, as there
+	   should be no v4l junk here).  Probably a better way to do this. */
+	int v4l_minor_number_video;
+	int v4l_minor_number_vbi;
+	int v4l_minor_number_radio;
+
+	/* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */
+	unsigned int input_avail_mask;
+	/* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */
+	unsigned int input_allowed_mask;
+
+	/* Location of eeprom or a negative number if none */
+	int eeprom_addr;
+
+	enum pvr2_config active_stream_type;
+	enum pvr2_config desired_stream_type;
+
+	/* Control state needed for cx2341x module */
+	struct cx2341x_mpeg_params enc_cur_state;
+	struct cx2341x_mpeg_params enc_ctl_state;
+	/* True if an encoder attribute has changed */
+	int enc_stale;
+	/* True if an unsafe encoder attribute has changed */
+	int enc_unsafe_stale;
+	/* True if enc_cur_state is valid */
+	int enc_cur_valid;
+
+	/* Control state */
+#define VCREATE_DATA(lab) int lab##_val; int lab##_dirty
+	VCREATE_DATA(brightness);
+	VCREATE_DATA(contrast);
+	VCREATE_DATA(saturation);
+	VCREATE_DATA(hue);
+	VCREATE_DATA(volume);
+	VCREATE_DATA(balance);
+	VCREATE_DATA(bass);
+	VCREATE_DATA(treble);
+	VCREATE_DATA(mute);
+	VCREATE_DATA(cropl);
+	VCREATE_DATA(cropt);
+	VCREATE_DATA(cropw);
+	VCREATE_DATA(croph);
+	VCREATE_DATA(input);
+	VCREATE_DATA(audiomode);
+	VCREATE_DATA(res_hor);
+	VCREATE_DATA(res_ver);
+	VCREATE_DATA(srate);
+#undef VCREATE_DATA
+
+	struct pvr2_ctld_info *mpeg_ctrl_info;
+
+	struct pvr2_ctrl *controls;
+	unsigned int control_cnt;
+};
+
+/* This function gets the current frequency */
+unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *);
+
+void pvr2_hdw_status_poll(struct pvr2_hdw *);
+
+#endif /* __PVRUSB2_HDW_INTERNAL_H */