Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 735 insertions, 0 deletions

diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
new file mode 100644
index 000000000..0d4d4bbfd
--- /dev/null
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 Free Electrons
+ * Copyright (C) 2017 NextThing Co
+ *
+ * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include "internals.h"
+
+#define NAND_HYNIX_CMD_SET_PARAMS	0x36
+#define NAND_HYNIX_CMD_APPLY_PARAMS	0x16
+
+#define NAND_HYNIX_1XNM_RR_REPEAT	8
+
+/**
+ * struct hynix_read_retry - read-retry data
+ * @nregs: number of register to set when applying a new read-retry mode
+ * @regs: register offsets (NAND chip dependent)
+ * @values: array of values to set in registers. The array size is equal to
+ *	    (nregs * nmodes)
+ */
+struct hynix_read_retry {
+	int nregs;
+	const u8 *regs;
+	u8 values[];
+};
+
+/**
+ * struct hynix_nand - private Hynix NAND struct
+ * @nand_technology: manufacturing process expressed in picometer
+ * @read_retry: read-retry information
+ */
+struct hynix_nand {
+	const struct hynix_read_retry *read_retry;
+};
+
+/**
+ * struct hynix_read_retry_otp - structure describing how the read-retry OTP
+ *				 area
+ * @nregs: number of hynix private registers to set before reading the reading
+ *	   the OTP area
+ * @regs: registers that should be configured
+ * @values: values that should be set in regs
+ * @page: the address to pass to the READ_PAGE command. Depends on the NAND
+ *	  chip
+ * @size: size of the read-retry OTP section
+ */
+struct hynix_read_retry_otp {
+	int nregs;
+	const u8 *regs;
+	const u8 *values;
+	int page;
+	int size;
+};
+
+static bool hynix_nand_has_valid_jedecid(struct nand_chip *chip)
+{
+	u8 jedecid[5] = { };
+	int ret;
+
+	ret = nand_readid_op(chip, 0x40, jedecid, sizeof(jedecid));
+	if (ret)
+		return false;
+
+	return !strncmp("JEDEC", jedecid, sizeof(jedecid));
+}
+
+static int hynix_nand_cmd_op(struct nand_chip *chip, u8 cmd)
+{
+	if (nand_has_exec_op(chip)) {
+		struct nand_op_instr instrs[] = {
+			NAND_OP_CMD(cmd, 0),
+		};
+		struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
+
+		return nand_exec_op(chip, &op);
+	}
+
+	chip->legacy.cmdfunc(chip, cmd, -1, -1);
+
+	return 0;
+}
+
+static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val)
+{
+	u16 column = ((u16)addr << 8) | addr;
+
+	if (nand_has_exec_op(chip)) {
+		struct nand_op_instr instrs[] = {
+			NAND_OP_ADDR(1, &addr, 0),
+			NAND_OP_8BIT_DATA_OUT(1, &val, 0),
+		};
+		struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
+
+		return nand_exec_op(chip, &op);
+	}
+
+	chip->legacy.cmdfunc(chip, NAND_CMD_NONE, column, -1);
+	chip->legacy.write_byte(chip, val);
+
+	return 0;
+}
+
+static int hynix_nand_setup_read_retry(struct nand_chip *chip, int retry_mode)
+{
+	struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
+	const u8 *values;
+	int i, ret;
+
+	values = hynix->read_retry->values +
+		 (retry_mode * hynix->read_retry->nregs);
+
+	/* Enter 'Set Hynix Parameters' mode */
+	ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
+	if (ret)
+		return ret;
+
+	/*
+	 * Configure the NAND in the requested read-retry mode.
+	 * This is done by setting pre-defined values in internal NAND
+	 * registers.
+	 *
+	 * The set of registers is NAND specific, and the values are either
+	 * predefined or extracted from an OTP area on the NAND (values are
+	 * probably tweaked at production in this case).
+	 */
+	for (i = 0; i < hynix->read_retry->nregs; i++) {
+		ret = hynix_nand_reg_write_op(chip, hynix->read_retry->regs[i],
+					      values[i]);
+		if (ret)
+			return ret;
+	}
+
+	/* Apply the new settings. */
+	return hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
+}
+
+/**
+ * hynix_get_majority - get the value that is occurring the most in a given
+ *			set of values
+ * @in: the array of values to test
+ * @repeat: the size of the in array
+ * @out: pointer used to store the output value
+ *
+ * This function implements the 'majority check' logic that is supposed to
+ * overcome the unreliability of MLC NANDs when reading the OTP area storing
+ * the read-retry parameters.
+ *
+ * It's based on a pretty simple assumption: if we repeat the same value
+ * several times and then take the one that is occurring the most, we should
+ * find the correct value.
+ * Let's hope this dummy algorithm prevents us from losing the read-retry
+ * parameters.
+ */
+static int hynix_get_majority(const u8 *in, int repeat, u8 *out)
+{
+	int i, j, half = repeat / 2;
+
+	/*
+	 * We only test the first half of the in array because we must ensure
+	 * that the value is at least occurring repeat / 2 times.
+	 *
+	 * This loop is suboptimal since we may count the occurrences of the
+	 * same value several time, but we are doing that on small sets, which
+	 * makes it acceptable.
+	 */
+	for (i = 0; i < half; i++) {
+		int cnt = 0;
+		u8 val = in[i];
+
+		/* Count all values that are matching the one at index i. */
+		for (j = i + 1; j < repeat; j++) {
+			if (in[j] == val)
+				cnt++;
+		}
+
+		/* We found a value occurring more than repeat / 2. */
+		if (cnt > half) {
+			*out = val;
+			return 0;
+		}
+	}
+
+	return -EIO;
+}
+
+static int hynix_read_rr_otp(struct nand_chip *chip,
+			     const struct hynix_read_retry_otp *info,
+			     void *buf)
+{
+	int i, ret;
+
+	ret = nand_reset_op(chip);
+	if (ret)
+		return ret;
+
+	ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < info->nregs; i++) {
+		ret = hynix_nand_reg_write_op(chip, info->regs[i],
+					      info->values[i]);
+		if (ret)
+			return ret;
+	}
+
+	ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
+	if (ret)
+		return ret;
+
+	/* Sequence to enter OTP mode? */
+	ret = hynix_nand_cmd_op(chip, 0x17);
+	if (ret)
+		return ret;
+
+	ret = hynix_nand_cmd_op(chip, 0x4);
+	if (ret)
+		return ret;
+
+	ret = hynix_nand_cmd_op(chip, 0x19);
+	if (ret)
+		return ret;
+
+	/* Now read the page */
+	ret = nand_read_page_op(chip, info->page, 0, buf, info->size);
+	if (ret)
+		return ret;
+
+	/* Put everything back to normal */
+	ret = nand_reset_op(chip);
+	if (ret)
+		return ret;
+
+	ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
+	if (ret)
+		return ret;
+
+	ret = hynix_nand_reg_write_op(chip, 0x38, 0);
+	if (ret)
+		return ret;
+
+	ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
+	if (ret)
+		return ret;
+
+	return nand_read_page_op(chip, 0, 0, NULL, 0);
+}
+
+#define NAND_HYNIX_1XNM_RR_COUNT_OFFS				0
+#define NAND_HYNIX_1XNM_RR_REG_COUNT_OFFS			8
+#define NAND_HYNIX_1XNM_RR_SET_OFFS(x, setsize, inv)		\
+	(16 + ((((x) * 2) + ((inv) ? 1 : 0)) * (setsize)))
+
+static int hynix_mlc_1xnm_rr_value(const u8 *buf, int nmodes, int nregs,
+				   int mode, int reg, bool inv, u8 *val)
+{
+	u8 tmp[NAND_HYNIX_1XNM_RR_REPEAT];
+	int val_offs = (mode * nregs) + reg;
+	int set_size = nmodes * nregs;
+	int i, ret;
+
+	for (i = 0; i < NAND_HYNIX_1XNM_RR_REPEAT; i++) {
+		int set_offs = NAND_HYNIX_1XNM_RR_SET_OFFS(i, set_size, inv);
+
+		tmp[i] = buf[val_offs + set_offs];
+	}
+
+	ret = hynix_get_majority(tmp, NAND_HYNIX_1XNM_RR_REPEAT, val);
+	if (ret)
+		return ret;
+
+	if (inv)
+		*val = ~*val;
+
+	return 0;
+}
+
+static u8 hynix_1xnm_mlc_read_retry_regs[] = {
+	0xcc, 0xbf, 0xaa, 0xab, 0xcd, 0xad, 0xae, 0xaf
+};
+
+static int hynix_mlc_1xnm_rr_init(struct nand_chip *chip,
+				  const struct hynix_read_retry_otp *info)
+{
+	struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
+	struct hynix_read_retry *rr = NULL;
+	int ret, i, j;
+	u8 nregs, nmodes;
+	u8 *buf;
+
+	buf = kmalloc(info->size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = hynix_read_rr_otp(chip, info, buf);
+	if (ret)
+		goto out;
+
+	ret = hynix_get_majority(buf, NAND_HYNIX_1XNM_RR_REPEAT,
+				 &nmodes);
+	if (ret)
+		goto out;
+
+	ret = hynix_get_majority(buf + NAND_HYNIX_1XNM_RR_REPEAT,
+				 NAND_HYNIX_1XNM_RR_REPEAT,
+				 &nregs);
+	if (ret)
+		goto out;
+
+	rr = kzalloc(sizeof(*rr) + (nregs * nmodes), GFP_KERNEL);
+	if (!rr) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < nmodes; i++) {
+		for (j = 0; j < nregs; j++) {
+			u8 *val = rr->values + (i * nregs);
+
+			ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j,
+						      false, val);
+			if (!ret)
+				continue;
+
+			ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j,
+						      true, val);
+			if (ret)
+				goto out;
+		}
+	}
+
+	rr->nregs = nregs;
+	rr->regs = hynix_1xnm_mlc_read_retry_regs;
+	hynix->read_retry = rr;
+	chip->ops.setup_read_retry = hynix_nand_setup_read_retry;
+	chip->read_retries = nmodes;
+
+out:
+	kfree(buf);
+
+	if (ret)
+		kfree(rr);
+
+	return ret;
+}
+
+static const u8 hynix_mlc_1xnm_rr_otp_regs[] = { 0x38 };
+static const u8 hynix_mlc_1xnm_rr_otp_values[] = { 0x52 };
+
+static const struct hynix_read_retry_otp hynix_mlc_1xnm_rr_otps[] = {
+	{
+		.nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs),
+		.regs = hynix_mlc_1xnm_rr_otp_regs,
+		.values = hynix_mlc_1xnm_rr_otp_values,
+		.page = 0x21f,
+		.size = 784
+	},
+	{
+		.nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs),
+		.regs = hynix_mlc_1xnm_rr_otp_regs,
+		.values = hynix_mlc_1xnm_rr_otp_values,
+		.page = 0x200,
+		.size = 528,
+	},
+};
+
+static int hynix_nand_rr_init(struct nand_chip *chip)
+{
+	int i, ret = 0;
+	bool valid_jedecid;
+
+	valid_jedecid = hynix_nand_has_valid_jedecid(chip);
+
+	/*
+	 * We only support read-retry for 1xnm NANDs, and those NANDs all
+	 * expose a valid JEDEC ID.
+	 */
+	if (valid_jedecid) {
+		u8 nand_tech = chip->id.data[5] >> 4;
+
+		/* 1xnm technology */
+		if (nand_tech == 4) {
+			for (i = 0; i < ARRAY_SIZE(hynix_mlc_1xnm_rr_otps);
+			     i++) {
+				/*
+				 * FIXME: Hynix recommend to copy the
+				 * read-retry OTP area into a normal page.
+				 */
+				ret = hynix_mlc_1xnm_rr_init(chip,
+						hynix_mlc_1xnm_rr_otps);
+				if (!ret)
+					break;
+			}
+		}
+	}
+
+	if (ret)
+		pr_warn("failed to initialize read-retry infrastructure");
+
+	return 0;
+}
+
+static void hynix_nand_extract_oobsize(struct nand_chip *chip,
+				       bool valid_jedecid)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+	u8 oobsize;
+
+	memorg = nanddev_get_memorg(&chip->base);
+
+	oobsize = ((chip->id.data[3] >> 2) & 0x3) |
+		  ((chip->id.data[3] >> 4) & 0x4);
+
+	if (valid_jedecid) {
+		switch (oobsize) {
+		case 0:
+			memorg->oobsize = 2048;
+			break;
+		case 1:
+			memorg->oobsize = 1664;
+			break;
+		case 2:
+			memorg->oobsize = 1024;
+			break;
+		case 3:
+			memorg->oobsize = 640;
+			break;
+		default:
+			/*
+			 * We should never reach this case, but if that
+			 * happens, this probably means Hynix decided to use
+			 * a different extended ID format, and we should find
+			 * a way to support it.
+			 */
+			WARN(1, "Invalid OOB size");
+			break;
+		}
+	} else {
+		switch (oobsize) {
+		case 0:
+			memorg->oobsize = 128;
+			break;
+		case 1:
+			memorg->oobsize = 224;
+			break;
+		case 2:
+			memorg->oobsize = 448;
+			break;
+		case 3:
+			memorg->oobsize = 64;
+			break;
+		case 4:
+			memorg->oobsize = 32;
+			break;
+		case 5:
+			memorg->oobsize = 16;
+			break;
+		case 6:
+			memorg->oobsize = 640;
+			break;
+		default:
+			/*
+			 * We should never reach this case, but if that
+			 * happens, this probably means Hynix decided to use
+			 * a different extended ID format, and we should find
+			 * a way to support it.
+			 */
+			WARN(1, "Invalid OOB size");
+			break;
+		}
+
+		/*
+		 * The datasheet of H27UCG8T2BTR mentions that the "Redundant
+		 * Area Size" is encoded "per 8KB" (page size). This chip uses
+		 * a page size of 16KiB. The datasheet mentions an OOB size of
+		 * 1.280 bytes, but the OOB size encoded in the ID bytes (using
+		 * the existing logic above) is 640 bytes.
+		 * Update the OOB size for this chip by taking the value
+		 * determined above and scaling it to the actual page size (so
+		 * the actual OOB size for this chip is: 640 * 16k / 8k).
+		 */
+		if (chip->id.data[1] == 0xde)
+			memorg->oobsize *= memorg->pagesize / SZ_8K;
+	}
+
+	mtd->oobsize = memorg->oobsize;
+}
+
+static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
+						bool valid_jedecid)
+{
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements = {};
+	u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
+
+	if (valid_jedecid) {
+		/* Reference: H27UCG8T2E datasheet */
+		requirements.step_size = 1024;
+
+		switch (ecc_level) {
+		case 0:
+			requirements.step_size = 0;
+			requirements.strength = 0;
+			break;
+		case 1:
+			requirements.strength = 4;
+			break;
+		case 2:
+			requirements.strength = 24;
+			break;
+		case 3:
+			requirements.strength = 32;
+			break;
+		case 4:
+			requirements.strength = 40;
+			break;
+		case 5:
+			requirements.strength = 50;
+			break;
+		case 6:
+			requirements.strength = 60;
+			break;
+		default:
+			/*
+			 * We should never reach this case, but if that
+			 * happens, this probably means Hynix decided to use
+			 * a different extended ID format, and we should find
+			 * a way to support it.
+			 */
+			WARN(1, "Invalid ECC requirements");
+		}
+	} else {
+		/*
+		 * The ECC requirements field meaning depends on the
+		 * NAND technology.
+		 */
+		u8 nand_tech = chip->id.data[5] & 0x7;
+
+		if (nand_tech < 3) {
+			/* > 26nm, reference: H27UBG8T2A datasheet */
+			if (ecc_level < 5) {
+				requirements.step_size = 512;
+				requirements.strength = 1 << ecc_level;
+			} else if (ecc_level < 7) {
+				if (ecc_level == 5)
+					requirements.step_size = 2048;
+				else
+					requirements.step_size = 1024;
+				requirements.strength = 24;
+			} else {
+				/*
+				 * We should never reach this case, but if that
+				 * happens, this probably means Hynix decided
+				 * to use a different extended ID format, and
+				 * we should find a way to support it.
+				 */
+				WARN(1, "Invalid ECC requirements");
+			}
+		} else {
+			/* <= 26nm, reference: H27UBG8T2B datasheet */
+			if (!ecc_level) {
+				requirements.step_size = 0;
+				requirements.strength = 0;
+			} else if (ecc_level < 5) {
+				requirements.step_size = 512;
+				requirements.strength = 1 << (ecc_level - 1);
+			} else {
+				requirements.step_size = 1024;
+				requirements.strength = 24 +
+							(8 * (ecc_level - 5));
+			}
+		}
+	}
+
+	nanddev_set_ecc_requirements(base, &requirements);
+}
+
+static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
+						       bool valid_jedecid)
+{
+	u8 nand_tech;
+
+	/* We need scrambling on all TLC NANDs*/
+	if (nanddev_bits_per_cell(&chip->base) > 2)
+		chip->options |= NAND_NEED_SCRAMBLING;
+
+	/* And on MLC NANDs with sub-3xnm process */
+	if (valid_jedecid) {
+		nand_tech = chip->id.data[5] >> 4;
+
+		/* < 3xnm */
+		if (nand_tech > 0)
+			chip->options |= NAND_NEED_SCRAMBLING;
+	} else {
+		nand_tech = chip->id.data[5] & 0x7;
+
+		/* < 32nm */
+		if (nand_tech > 2)
+			chip->options |= NAND_NEED_SCRAMBLING;
+	}
+}
+
+static void hynix_nand_decode_id(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+	bool valid_jedecid;
+	u8 tmp;
+
+	memorg = nanddev_get_memorg(&chip->base);
+
+	/*
+	 * Exclude all SLC NANDs from this advanced detection scheme.
+	 * According to the ranges defined in several datasheets, it might
+	 * appear that even SLC NANDs could fall in this extended ID scheme.
+	 * If that the case rework the test to let SLC NANDs go through the
+	 * detection process.
+	 */
+	if (chip->id.len < 6 || nand_is_slc(chip)) {
+		nand_decode_ext_id(chip);
+		return;
+	}
+
+	/* Extract pagesize */
+	memorg->pagesize = 2048 << (chip->id.data[3] & 0x03);
+	mtd->writesize = memorg->pagesize;
+
+	tmp = (chip->id.data[3] >> 4) & 0x3;
+	/*
+	 * When bit7 is set that means we start counting at 1MiB, otherwise
+	 * we start counting at 128KiB and shift this value the content of
+	 * ID[3][4:5].
+	 * The only exception is when ID[3][4:5] == 3 and ID[3][7] == 0, in
+	 * this case the erasesize is set to 768KiB.
+	 */
+	if (chip->id.data[3] & 0x80) {
+		memorg->pages_per_eraseblock = (SZ_1M << tmp) /
+					       memorg->pagesize;
+		mtd->erasesize = SZ_1M << tmp;
+	} else if (tmp == 3) {
+		memorg->pages_per_eraseblock = (SZ_512K + SZ_256K) /
+					       memorg->pagesize;
+		mtd->erasesize = SZ_512K + SZ_256K;
+	} else {
+		memorg->pages_per_eraseblock = (SZ_128K << tmp) /
+					       memorg->pagesize;
+		mtd->erasesize = SZ_128K << tmp;
+	}
+
+	/*
+	 * Modern Toggle DDR NANDs have a valid JEDECID even though they are
+	 * not exposing a valid JEDEC parameter table.
+	 * These NANDs use a different NAND ID scheme.
+	 */
+	valid_jedecid = hynix_nand_has_valid_jedecid(chip);
+
+	hynix_nand_extract_oobsize(chip, valid_jedecid);
+	hynix_nand_extract_ecc_requirements(chip, valid_jedecid);
+	hynix_nand_extract_scrambling_requirements(chip, valid_jedecid);
+}
+
+static void hynix_nand_cleanup(struct nand_chip *chip)
+{
+	struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
+
+	if (!hynix)
+		return;
+
+	kfree(hynix->read_retry);
+	kfree(hynix);
+	nand_set_manufacturer_data(chip, NULL);
+}
+
+static int
+h27ucg8t2atrbc_choose_interface_config(struct nand_chip *chip,
+				       struct nand_interface_config *iface)
+{
+	onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);
+
+	return nand_choose_best_sdr_timings(chip, iface, NULL);
+}
+
+static int h27ucg8t2etrbc_init(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	chip->options |= NAND_NEED_SCRAMBLING;
+	mtd_set_pairing_scheme(mtd, &dist3_pairing_scheme);
+
+	return 0;
+}
+
+static int hynix_nand_init(struct nand_chip *chip)
+{
+	struct hynix_nand *hynix;
+	int ret;
+
+	if (!nand_is_slc(chip))
+		chip->options |= NAND_BBM_LASTPAGE;
+	else
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+
+	hynix = kzalloc(sizeof(*hynix), GFP_KERNEL);
+	if (!hynix)
+		return -ENOMEM;
+
+	nand_set_manufacturer_data(chip, hynix);
+
+	if (!strncmp("H27UCG8T2ATR-BC", chip->parameters.model,
+		     sizeof("H27UCG8T2ATR-BC") - 1))
+		chip->ops.choose_interface_config =
+			h27ucg8t2atrbc_choose_interface_config;
+
+	if (!strncmp("H27UCG8T2ETR-BC", chip->parameters.model,
+		     sizeof("H27UCG8T2ETR-BC") - 1))
+		h27ucg8t2etrbc_init(chip);
+
+	ret = hynix_nand_rr_init(chip);
+	if (ret)
+		hynix_nand_cleanup(chip);
+
+	return ret;
+}
+
+const struct nand_manufacturer_ops hynix_nand_manuf_ops = {
+	.detect = hynix_nand_decode_id,
+	.init = hynix_nand_init,
+	.cleanup = hynix_nand_cleanup,
+};