Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3357 insertions, 0 deletions

diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
new file mode 100644
index 000000000..082388bb6
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -0,0 +1,3357 @@
+/* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */
+/*
+	Written 1996-1999 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	This driver is for the 3Com "Vortex" and "Boomerang" series ethercards.
+	Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597
+	and the EtherLink XL 3c900 and 3c905 cards.
+
+	Problem reports and questions should be directed to
+	vortex@scyld.com
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+*/
+
+/*
+ * FIXME: This driver _could_ support MTU changing, but doesn't.  See Don's hamachi.c implementation
+ * as well as other drivers
+ *
+ * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k
+ * due to dead code elimination.  There will be some performance benefits from this due to
+ * elimination of all the tests and reduced cache footprint.
+ */
+
+
+#define DRV_NAME	"3c59x"
+
+
+
+/* A few values that may be tweaked. */
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE	16
+#define RX_RING_SIZE	32
+#define PKT_BUF_SZ		1536			/* Size of each temporary Rx buffer.*/
+
+/* "Knobs" that adjust features and parameters. */
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1512 effectively disables this feature. */
+#ifndef __arm__
+static int rx_copybreak = 200;
+#else
+/* ARM systems perform better by disregarding the bus-master
+   transfer capability of these cards. -- rmk */
+static int rx_copybreak = 1513;
+#endif
+/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
+static const int mtu = 1500;
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 32;
+/* Tx timeout interval (millisecs) */
+static int watchdog = 5000;
+
+/* Allow aggregation of Tx interrupts.  Saves CPU load at the cost
+ * of possible Tx stalls if the system is blocking interrupts
+ * somewhere else.  Undefine this to disable.
+ */
+#define tx_interrupt_mitigation 1
+
+/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */
+#define vortex_debug debug
+#ifdef VORTEX_DEBUG
+static int vortex_debug = VORTEX_DEBUG;
+#else
+static int vortex_debug = 1;
+#endif
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/eisa.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/gfp.h>
+#include <asm/irq.h>			/* For nr_irqs only. */
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+/* Kernel compatibility defines, some common to David Hinds' PCMCIA package.
+   This is only in the support-all-kernels source code. */
+
+#define RUN_AT(x) (jiffies + (x))
+
+#include <linux/delay.h>
+
+
+static const char version[] =
+	DRV_NAME ": Donald Becker and others.\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
+MODULE_LICENSE("GPL");
+
+
+/* Operational parameter that usually are not changed. */
+
+/* The Vortex size is twice that of the original EtherLinkIII series: the
+   runtime register window, window 1, is now always mapped in.
+   The Boomerang size is twice as large as the Vortex -- it has additional
+   bus master control registers. */
+#define VORTEX_TOTAL_SIZE 0x20
+#define BOOMERANG_TOTAL_SIZE 0x40
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with the original DP83840 on older 3c905 boards, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required;
+
+#define PFX DRV_NAME ": "
+
+
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com FastEtherLink and FastEtherLink
+XL, 3Com's PCI to 10/100baseT adapters.  It also works with the 10Mbs
+versions of the FastEtherLink cards.  The supported product IDs are
+  3c590, 3c592, 3c595, 3c597, 3c900, 3c905
+
+The related ISA 3c515 is supported with a separate driver, 3c515.c, included
+with the kernel source or available from
+    cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board.  The system BIOS should be set to assign the
+PCI INTA signal to an otherwise unused system IRQ line.
+
+The EEPROM settings for media type and forced-full-duplex are observed.
+The EEPROM media type should be left at the default "autoselect" unless using
+10base2 or AUI connections which cannot be reliably detected.
+
+III. Driver operation
+
+The 3c59x series use an interface that's very similar to the previous 3c5x9
+series.  The primary interface is two programmed-I/O FIFOs, with an
+alternate single-contiguous-region bus-master transfer (see next).
+
+The 3c900 "Boomerang" series uses a full-bus-master interface with separate
+lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
+DEC Tulip and Intel Speedo3.  The first chip version retains a compatible
+programmed-I/O interface that has been removed in 'B' and subsequent board
+revisions.
+
+One extension that is advertised in a very large font is that the adapters
+are capable of being bus masters.  On the Vortex chip this capability was
+only for a single contiguous region making it far less useful than the full
+bus master capability.  There is a significant performance impact of taking
+an extra interrupt or polling for the completion of each transfer, as well
+as difficulty sharing the single transfer engine between the transmit and
+receive threads.  Using DMA transfers is a win only with large blocks or
+with the flawed versions of the Intel Orion motherboard PCI controller.
+
+The Boomerang chip's full-bus-master interface is useful, and has the
+currently-unused advantages over other similar chips that queued transmit
+packets may be reordered and receive buffer groups are associated with a
+single frame.
+
+With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme.
+Rather than a fixed intermediate receive buffer, this scheme allocates
+full-sized skbuffs as receive buffers.  The value RX_COPYBREAK is used as
+the copying breakpoint: it is chosen to trade-off the memory wasted by
+passing the full-sized skbuff to the queue layer for all frames vs. the
+copying cost of copying a frame to a correctly-sized skbuff.
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control.  One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag.  The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+IV. Notes
+
+Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development
+3c590, 3c595, and 3c900 boards.
+The name "Vortex" is the internal 3Com project name for the PCI ASIC, and
+the EISA version is called "Demon".  According to Terry these names come
+from rides at the local amusement park.
+
+The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes!
+This driver only supports ethernet packets because of the skbuff allocation
+limit of 4K.
+*/
+
+/* This table drives the PCI probe routines.  It's mostly boilerplate in all
+   of the drivers, and will likely be provided by some future kernel.
+*/
+enum pci_flags_bit {
+	PCI_USES_MASTER=4,
+};
+
+enum {	IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8,
+	EEPROM_8BIT=0x10,	/* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */
+	HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100,
+	INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800,
+	EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000,
+	EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, };
+
+enum vortex_chips {
+	CH_3C590 = 0,
+	CH_3C592,
+	CH_3C597,
+	CH_3C595_1,
+	CH_3C595_2,
+
+	CH_3C595_3,
+	CH_3C900_1,
+	CH_3C900_2,
+	CH_3C900_3,
+	CH_3C900_4,
+
+	CH_3C900_5,
+	CH_3C900B_FL,
+	CH_3C905_1,
+	CH_3C905_2,
+	CH_3C905B_TX,
+	CH_3C905B_1,
+
+	CH_3C905B_2,
+	CH_3C905B_FX,
+	CH_3C905C,
+	CH_3C9202,
+	CH_3C980,
+	CH_3C9805,
+
+	CH_3CSOHO100_TX,
+	CH_3C555,
+	CH_3C556,
+	CH_3C556B,
+	CH_3C575,
+
+	CH_3C575_1,
+	CH_3CCFE575,
+	CH_3CCFE575CT,
+	CH_3CCFE656,
+	CH_3CCFEM656,
+
+	CH_3CCFEM656_1,
+	CH_3C450,
+	CH_3C920,
+	CH_3C982A,
+	CH_3C982B,
+
+	CH_905BT4,
+	CH_920B_EMB_WNM,
+};
+
+
+/* note: this array directly indexed by above enums, and MUST
+ * be kept in sync with both the enums above, and the PCI device
+ * table below
+ */
+static struct vortex_chip_info {
+	const char *name;
+	int flags;
+	int drv_flags;
+	int io_size;
+} vortex_info_tbl[] = {
+	{"3c590 Vortex 10Mbps",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c592 EISA 10Mbps Demon/Vortex",					/* AKPM: from Don's 3c59x_cb.c 0.49H */
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c597 EISA Fast Demon/Vortex",					/* AKPM: from Don's 3c59x_cb.c 0.49H */
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c595 Vortex 100baseTx",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c595 Vortex 100baseT4",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+
+	{"3c595 Vortex 100base-MII",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c900 Boomerang 10baseT",
+	 PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+	{"3c900 Boomerang 10Mbps Combo",
+	 PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+	{"3c900 Cyclone 10Mbps TPO",						/* AKPM: from Don's 0.99M */
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c900 Cyclone 10Mbps Combo",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+
+	{"3c900 Cyclone 10Mbps TPC",						/* AKPM: from Don's 0.99M */
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c900B-FL Cyclone 10base-FL",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c905 Boomerang 100baseTx",
+	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+	{"3c905 Boomerang 100baseT4",
+	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+	{"3C905B-TX Fast Etherlink XL PCI",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c905B Cyclone 100baseTx",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+
+	{"3c905B Cyclone 10/100/BNC",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3c905B-FX Cyclone 100baseFx",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c905C Tornado",
+	PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c920B-EMB-WNM (ATI Radeon 9100 IGP)",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, },
+	{"3c980 Cyclone",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+
+	{"3c980C Python-T",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3cSOHO100-TX Hurricane",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c555 Laptop Hurricane",
+	 PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
+	{"3c556 Laptop Tornado",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR|
+									HAS_HWCKSM, 128, },
+	{"3c556B Laptop Hurricane",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR|
+	                                WNO_XCVR_PWR|HAS_HWCKSM, 128, },
+
+	{"3c575 [Megahertz] 10/100 LAN 	CardBus",
+	PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+	{"3c575 Boomerang CardBus",
+	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+	{"3CCFE575BT Cyclone CardBus",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|
+									INVERT_LED_PWR|HAS_HWCKSM, 128, },
+	{"3CCFE575CT Tornado CardBus",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
+	{"3CCFE656 Cyclone CardBus",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									INVERT_LED_PWR|HAS_HWCKSM, 128, },
+
+	{"3CCFEM656B Cyclone+Winmodem CardBus",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									INVERT_LED_PWR|HAS_HWCKSM, 128, },
+	{"3CXFEM656C Tornado+Winmodem CardBus",			/* From pcmcia-cs-3.1.5 */
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
+	{"3c450 HomePNA Tornado",						/* AKPM: from Don's 0.99Q */
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3c920 Tornado",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3c982 Hydra Dual Port A",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+
+	{"3c982 Hydra Dual Port B",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+	{"3c905B-T4",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c920B-EMB-WNM Tornado",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+
+	{NULL,}, /* NULL terminated list. */
+};
+
+
+static const struct pci_device_id vortex_pci_tbl[] = {
+	{ 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 },
+	{ 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 },
+	{ 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 },
+	{ 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 },
+	{ 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 },
+
+	{ 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 },
+	{ 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 },
+	{ 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 },
+	{ 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 },
+	{ 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 },
+
+	{ 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 },
+	{ 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
+	{ 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
+	{ 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+	{ 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
+	{ 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
+
+	{ 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
+	{ 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX },
+	{ 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C },
+	{ 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 },
+	{ 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 },
+	{ 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 },
+
+	{ 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX },
+	{ 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 },
+	{ 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 },
+	{ 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B },
+	{ 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 },
+
+	{ 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 },
+	{ 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 },
+	{ 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT },
+	{ 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 },
+	{ 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 },
+
+	{ 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 },
+	{ 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 },
+	{ 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 },
+	{ 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A },
+	{ 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B },
+
+	{ 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 },
+	{ 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM },
+
+	{0,}						/* 0 terminated list. */
+};
+MODULE_DEVICE_TABLE(pci, vortex_pci_tbl);
+
+
+/* Operational definitions.
+   These are not used by other compilation units and thus are not
+   exported in a ".h" file.
+
+   First the windows.  There are eight register windows, with the command
+   and status registers available in each.
+   */
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable.
+   Note that 11 parameters bits was fine for ethernet, but the new chip
+   can handle FDDI length frames (~4500 octets) and now parameters count
+   32-bit 'Dwords' rather than octets. */
+
+enum vortex_cmd {
+	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11,
+	UpStall = 6<<11, UpUnstall = (6<<11)+1,
+	DownStall = (6<<11)+2, DownUnstall = (6<<11)+3,
+	RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+	SetTxThreshold = 18<<11, SetTxStart = 19<<11,
+	StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11,
+	StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Bits in the general status register. */
+enum vortex_status {
+	IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004,
+	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+	IntReq = 0x0040, StatsFull = 0x0080,
+	DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10,
+	DMAInProgress = 1<<11,			/* DMA controller is still busy.*/
+	CmdInProgress = 1<<12,			/* EL3_CMD is still busy.*/
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+   On the Vortex this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+	TX_FIFO = 0x10,  RX_FIFO = 0x10,  RxErrors = 0x14,
+	RxStatus = 0x18,  Timer=0x1A, TxStatus = 0x1B,
+	TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+	Wn0EepromCmd = 10,		/* Window 0: EEPROM command register. */
+	Wn0EepromData = 12,		/* Window 0: EEPROM results register. */
+	IntrStatus=0x0E,		/* Valid in all windows. */
+};
+enum Win0_EEPROM_bits {
+	EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+	EEPROM_EWENB = 0x30,		/* Enable erasing/writing for 10 msec. */
+	EEPROM_EWDIS = 0x00,		/* Disable EWENB before 10 msec timeout. */
+};
+/* EEPROM locations. */
+enum eeprom_offset {
+	PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3,
+	EtherLink3ID=7, IFXcvrIO=8, IRQLine=9,
+	NodeAddr01=10, NodeAddr23=11, NodeAddr45=12,
+	DriverTune=13, Checksum=15};
+
+enum Window2 {			/* Window 2. */
+	Wn2_ResetOptions=12,
+};
+enum Window3 {			/* Window 3: MAC/config bits. */
+	Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8,
+};
+
+#define BFEXT(value, offset, bitcount)  \
+    ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
+
+#define BFINS(lhs, rhs, offset, bitcount)					\
+	(((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) |	\
+	(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
+
+#define RAM_SIZE(v)		BFEXT(v, 0, 3)
+#define RAM_WIDTH(v)	BFEXT(v, 3, 1)
+#define RAM_SPEED(v)	BFEXT(v, 4, 2)
+#define ROM_SIZE(v)		BFEXT(v, 6, 2)
+#define RAM_SPLIT(v)	BFEXT(v, 16, 2)
+#define XCVR(v)			BFEXT(v, 20, 4)
+#define AUTOSELECT(v)	BFEXT(v, 24, 1)
+
+enum Window4 {		/* Window 4: Xcvr/media bits. */
+	Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
+};
+enum Win4_Media_bits {
+	Media_SQE = 0x0008,		/* Enable SQE error counting for AUI. */
+	Media_10TP = 0x00C0,	/* Enable link beat and jabber for 10baseT. */
+	Media_Lnk = 0x0080,		/* Enable just link beat for 100TX/100FX. */
+	Media_LnkBeat = 0x0800,
+};
+enum Window7 {					/* Window 7: Bus Master control. */
+	Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6,
+	Wn7_MasterStatus = 12,
+};
+/* Boomerang bus master control registers. */
+enum MasterCtrl {
+	PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c,
+	TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38,
+};
+
+/* The Rx and Tx descriptor lists.
+   Caution Alpha hackers: these types are 32 bits!  Note also the 8 byte
+   alignment contraint on tx_ring[] and rx_ring[]. */
+#define LAST_FRAG 	0x80000000			/* Last Addr/Len pair in descriptor. */
+#define DN_COMPLETE	0x00010000			/* This packet has been downloaded */
+struct boom_rx_desc {
+	__le32 next;					/* Last entry points to 0.   */
+	__le32 status;
+	__le32 addr;					/* Up to 63 addr/len pairs possible. */
+	__le32 length;					/* Set LAST_FRAG to indicate last pair. */
+};
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+	RxDComplete=0x00008000, RxDError=0x4000,
+	/* See boomerang_rx() for actual error bits */
+	IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27,
+	IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31,
+};
+
+#ifdef MAX_SKB_FRAGS
+#define DO_ZEROCOPY 1
+#else
+#define DO_ZEROCOPY 0
+#endif
+
+struct boom_tx_desc {
+	__le32 next;					/* Last entry points to 0.   */
+	__le32 status;					/* bits 0:12 length, others see below.  */
+#if DO_ZEROCOPY
+	struct {
+		__le32 addr;
+		__le32 length;
+	} frag[1+MAX_SKB_FRAGS];
+#else
+		__le32 addr;
+		__le32 length;
+#endif
+};
+
+/* Values for the Tx status entry. */
+enum tx_desc_status {
+	CRCDisable=0x2000, TxDComplete=0x8000,
+	AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000,
+	TxIntrUploaded=0x80000000,		/* IRQ when in FIFO, but maybe not sent. */
+};
+
+/* Chip features we care about in vp->capabilities, read from the EEPROM. */
+enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 };
+
+struct vortex_extra_stats {
+	unsigned long tx_deferred;
+	unsigned long tx_max_collisions;
+	unsigned long tx_multiple_collisions;
+	unsigned long tx_single_collisions;
+	unsigned long rx_bad_ssd;
+};
+
+struct vortex_private {
+	/* The Rx and Tx rings should be quad-word-aligned. */
+	struct boom_rx_desc* rx_ring;
+	struct boom_tx_desc* tx_ring;
+	dma_addr_t rx_ring_dma;
+	dma_addr_t tx_ring_dma;
+	/* The addresses of transmit- and receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	unsigned int cur_rx, cur_tx;		/* The next free ring entry */
+	unsigned int dirty_tx;	/* The ring entries to be free()ed. */
+	struct vortex_extra_stats xstats;	/* NIC-specific extra stats */
+	struct sk_buff *tx_skb;				/* Packet being eaten by bus master ctrl.  */
+	dma_addr_t tx_skb_dma;				/* Allocated DMA address for bus master ctrl DMA.   */
+
+	/* PCI configuration space information. */
+	struct device *gendev;
+	void __iomem *ioaddr;			/* IO address space */
+	void __iomem *cb_fn_base;		/* CardBus function status addr space. */
+
+	/* Some values here only for performance evaluation and path-coverage */
+	int rx_nocopy, rx_copy, queued_packet, rx_csumhits;
+	int card_idx;
+
+	/* The remainder are related to chip state, mostly media selection. */
+	struct timer_list timer;			/* Media selection timer. */
+	int options;						/* User-settable misc. driver options. */
+	unsigned int media_override:4, 		/* Passed-in media type. */
+		default_media:4,				/* Read from the EEPROM/Wn3_Config. */
+		full_duplex:1, autoselect:1,
+		bus_master:1,					/* Vortex can only do a fragment bus-m. */
+		full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang  */
+		flow_ctrl:1,					/* Use 802.3x flow control (PAUSE only) */
+		partner_flow_ctrl:1,			/* Partner supports flow control */
+		has_nway:1,
+		enable_wol:1,					/* Wake-on-LAN is enabled */
+		pm_state_valid:1,				/* pci_dev->saved_config_space has sane contents */
+		open:1,
+		medialock:1,
+		large_frames:1,			/* accept large frames */
+		handling_irq:1;			/* private in_irq indicator */
+	/* {get|set}_wol operations are already serialized by rtnl.
+	 * no additional locking is required for the enable_wol and acpi_set_WOL()
+	 */
+	int drv_flags;
+	u16 status_enable;
+	u16 intr_enable;
+	u16 available_media;				/* From Wn3_Options. */
+	u16 capabilities, info1, info2;		/* Various, from EEPROM. */
+	u16 advertising;					/* NWay media advertisement */
+	unsigned char phys[2];				/* MII device addresses. */
+	u16 deferred;						/* Resend these interrupts when we
+										 * bale from the ISR */
+	u16 io_size;						/* Size of PCI region (for release_region) */
+
+	/* Serialises access to hardware other than MII and variables below.
+	 * The lock hierarchy is rtnl_lock > {lock, mii_lock} > window_lock. */
+	spinlock_t lock;
+
+	spinlock_t mii_lock;		/* Serialises access to MII */
+	struct mii_if_info mii;		/* MII lib hooks/info */
+	spinlock_t window_lock;		/* Serialises access to windowed regs */
+	int window;			/* Register window */
+};
+
+static void window_set(struct vortex_private *vp, int window)
+{
+	if (window != vp->window) {
+		iowrite16(SelectWindow + window, vp->ioaddr + EL3_CMD);
+		vp->window = window;
+	}
+}
+
+#define DEFINE_WINDOW_IO(size)						\
+static u ## size							\
+window_read ## size(struct vortex_private *vp, int window, int addr)	\
+{									\
+	unsigned long flags;						\
+	u ## size ret;							\
+	spin_lock_irqsave(&vp->window_lock, flags);			\
+	window_set(vp, window);						\
+	ret = ioread ## size(vp->ioaddr + addr);			\
+	spin_unlock_irqrestore(&vp->window_lock, flags);		\
+	return ret;							\
+}									\
+static void								\
+window_write ## size(struct vortex_private *vp, u ## size value,	\
+		     int window, int addr)				\
+{									\
+	unsigned long flags;						\
+	spin_lock_irqsave(&vp->window_lock, flags);			\
+	window_set(vp, window);						\
+	iowrite ## size(value, vp->ioaddr + addr);			\
+	spin_unlock_irqrestore(&vp->window_lock, flags);		\
+}
+DEFINE_WINDOW_IO(8)
+DEFINE_WINDOW_IO(16)
+DEFINE_WINDOW_IO(32)
+
+#ifdef CONFIG_PCI
+#define DEVICE_PCI(dev) ((dev_is_pci(dev)) ? to_pci_dev((dev)) : NULL)
+#else
+#define DEVICE_PCI(dev) NULL
+#endif
+
+#define VORTEX_PCI(vp)							\
+	((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL))
+
+#ifdef CONFIG_EISA
+#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
+#else
+#define DEVICE_EISA(dev) NULL
+#endif
+
+#define VORTEX_EISA(vp)							\
+	((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL))
+
+/* The action to take with a media selection timer tick.
+   Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+	XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+	XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10,
+};
+
+static const struct media_table {
+	char *name;
+	unsigned int media_bits:16,		/* Bits to set in Wn4_Media register. */
+		mask:8,						/* The transceiver-present bit in Wn3_Config.*/
+		next:8;						/* The media type to try next. */
+	int wait;						/* Time before we check media status. */
+} media_tbl[] = {
+  {	"10baseT",   Media_10TP,0x08, XCVR_10base2, (14*HZ)/10},
+  { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10},
+  { "undefined", 0,			0x80, XCVR_10baseT, 10000},
+  { "10base2",   0,			0x10, XCVR_AUI,		(1*HZ)/10},
+  { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10},
+  { "100baseFX", Media_Lnk, 0x04, XCVR_MII,		(14*HZ)/10},
+  { "MII",		 0,			0x41, XCVR_10baseT, 3*HZ },
+  { "undefined", 0,			0x01, XCVR_10baseT, 10000},
+  { "Autonegotiate", 0,		0x41, XCVR_10baseT, 3*HZ},
+  { "MII-External",	 0,		0x41, XCVR_10baseT, 3*HZ },
+  { "Default",	 0,			0xFF, XCVR_10baseT, 10000},
+};
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "tx_deferred" },
+	{ "tx_max_collisions" },
+	{ "tx_multiple_collisions" },
+	{ "tx_single_collisions" },
+	{ "rx_bad_ssd" },
+};
+
+/* number of ETHTOOL_GSTATS u64's */
+#define VORTEX_NUM_STATS    5
+
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
+				   int chip_idx, int card_idx);
+static int vortex_up(struct net_device *dev);
+static void vortex_down(struct net_device *dev, int final);
+static int vortex_open(struct net_device *dev);
+static void mdio_sync(struct vortex_private *vp, int bits);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
+static void vortex_timer(struct timer_list *t);
+static netdev_tx_t vortex_start_xmit(struct sk_buff *skb,
+				     struct net_device *dev);
+static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static int vortex_rx(struct net_device *dev);
+static int boomerang_rx(struct net_device *dev);
+static irqreturn_t vortex_boomerang_interrupt(int irq, void *dev_id);
+static irqreturn_t _vortex_interrupt(int irq, struct net_device *dev);
+static irqreturn_t _boomerang_interrupt(int irq, struct net_device *dev);
+static int vortex_close(struct net_device *dev);
+static void dump_tx_ring(struct net_device *dev);
+static void update_stats(void __iomem *ioaddr, struct net_device *dev);
+static struct net_device_stats *vortex_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+#ifdef CONFIG_PCI
+static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+#endif
+static void vortex_tx_timeout(struct net_device *dev, unsigned int txqueue);
+static void acpi_set_WOL(struct net_device *dev);
+static const struct ethtool_ops vortex_ethtool_ops;
+static void set_8021q_mode(struct net_device *dev, int enable);
+
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Option count limit only -- unlimited interfaces are supported. */
+#define MAX_UNITS 8
+static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int global_options = -1;
+static int global_full_duplex = -1;
+static int global_enable_wol = -1;
+static int global_use_mmio = -1;
+
+/* Variables to work-around the Compaq PCI BIOS32 problem. */
+static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900;
+static struct net_device *compaq_net_device;
+
+static int vortex_cards_found;
+
+module_param(debug, int, 0);
+module_param(global_options, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param(global_full_duplex, int, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param_array(hw_checksums, int, NULL, 0);
+module_param_array(flow_ctrl, int, NULL, 0);
+module_param(global_enable_wol, int, 0);
+module_param_array(enable_wol, int, NULL, 0);
+module_param(rx_copybreak, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param_hw(compaq_ioaddr, int, ioport, 0);
+module_param_hw(compaq_irq, int, irq, 0);
+module_param(compaq_device_id, int, 0);
+module_param(watchdog, int, 0);
+module_param(global_use_mmio, int, 0);
+module_param_array(use_mmio, int, NULL, 0);
+MODULE_PARM_DESC(debug, "3c59x debug level (0-6)");
+MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
+MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)");
+MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset");
+MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)");
+MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)");
+MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)");
+MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset");
+MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt");
+MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_vortex(struct net_device *dev)
+{
+	vortex_boomerang_interrupt(dev->irq, dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+
+static int vortex_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	netif_device_detach(ndev);
+	vortex_down(ndev, 1);
+
+	return 0;
+}
+
+static int vortex_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	int err;
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	err = vortex_up(ndev);
+	if (err)
+		return err;
+
+	netif_device_attach(ndev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops vortex_pm_ops = {
+	.suspend = vortex_suspend,
+	.resume = vortex_resume,
+	.freeze = vortex_suspend,
+	.thaw = vortex_resume,
+	.poweroff = vortex_suspend,
+	.restore = vortex_resume,
+};
+
+#define VORTEX_PM_OPS (&vortex_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define VORTEX_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
+
+#ifdef CONFIG_EISA
+static const struct eisa_device_id vortex_eisa_ids[] = {
+	{ "TCM5920", CH_3C592 },
+	{ "TCM5970", CH_3C597 },
+	{ "" }
+};
+MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
+
+static int vortex_eisa_probe(struct device *device)
+{
+	void __iomem *ioaddr;
+	struct eisa_device *edev;
+
+	edev = to_eisa_device(device);
+
+	if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
+		return -EBUSY;
+
+	ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
+					  edev->id.driver_data, vortex_cards_found)) {
+		release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
+		return -ENODEV;
+	}
+
+	vortex_cards_found++;
+
+	return 0;
+}
+
+static int vortex_eisa_remove(struct device *device)
+{
+	struct eisa_device *edev;
+	struct net_device *dev;
+	struct vortex_private *vp;
+	void __iomem *ioaddr;
+
+	edev = to_eisa_device(device);
+	dev = eisa_get_drvdata(edev);
+
+	if (!dev) {
+		pr_err("vortex_eisa_remove called for Compaq device!\n");
+		BUG();
+	}
+
+	vp = netdev_priv(dev);
+	ioaddr = vp->ioaddr;
+
+	unregister_netdev(dev);
+	iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
+	release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	free_netdev(dev);
+	return 0;
+}
+
+static struct eisa_driver vortex_eisa_driver = {
+	.id_table = vortex_eisa_ids,
+	.driver   = {
+		.name    = "3c59x",
+		.probe   = vortex_eisa_probe,
+		.remove  = vortex_eisa_remove
+	}
+};
+
+#endif /* CONFIG_EISA */
+
+/* returns count found (>= 0), or negative on error */
+static int __init vortex_eisa_init(void)
+{
+	int eisa_found = 0;
+	int orig_cards_found = vortex_cards_found;
+
+#ifdef CONFIG_EISA
+	int err;
+
+	err = eisa_driver_register (&vortex_eisa_driver);
+	if (!err) {
+		/*
+		 * Because of the way EISA bus is probed, we cannot assume
+		 * any device have been found when we exit from
+		 * eisa_driver_register (the bus root driver may not be
+		 * initialized yet). So we blindly assume something was
+		 * found, and let the sysfs magic happened...
+		 */
+		eisa_found = 1;
+	}
+#endif
+
+	/* Special code to work-around the Compaq PCI BIOS32 problem. */
+	if (compaq_ioaddr) {
+		vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
+			      compaq_irq, compaq_device_id, vortex_cards_found++);
+	}
+
+	return vortex_cards_found - orig_cards_found + eisa_found;
+}
+
+/* returns count (>= 0), or negative on error */
+static int vortex_init_one(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	int rc, unit, pci_bar;
+	struct vortex_chip_info *vci;
+	void __iomem *ioaddr;
+
+	/* wake up and enable device */
+	rc = pci_enable_device(pdev);
+	if (rc < 0)
+		goto out;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc < 0)
+		goto out_disable;
+
+	unit = vortex_cards_found;
+
+	if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
+		/* Determine the default if the user didn't override us */
+		vci = &vortex_info_tbl[ent->driver_data];
+		pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0;
+	} else if (unit < MAX_UNITS && use_mmio[unit] >= 0)
+		pci_bar = use_mmio[unit] ? 1 : 0;
+	else
+		pci_bar = global_use_mmio ? 1 : 0;
+
+	ioaddr = pci_iomap(pdev, pci_bar, 0);
+	if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
+		ioaddr = pci_iomap(pdev, 0, 0);
+	if (!ioaddr) {
+		rc = -ENOMEM;
+		goto out_release;
+	}
+
+	rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
+			   ent->driver_data, unit);
+	if (rc < 0)
+		goto out_iounmap;
+
+	vortex_cards_found++;
+	goto out;
+
+out_iounmap:
+	pci_iounmap(pdev, ioaddr);
+out_release:
+	pci_release_regions(pdev);
+out_disable:
+	pci_disable_device(pdev);
+out:
+	return rc;
+}
+
+static const struct net_device_ops boomrang_netdev_ops = {
+	.ndo_open		= vortex_open,
+	.ndo_stop		= vortex_close,
+	.ndo_start_xmit		= boomerang_start_xmit,
+	.ndo_tx_timeout		= vortex_tx_timeout,
+	.ndo_get_stats		= vortex_get_stats,
+#ifdef CONFIG_PCI
+	.ndo_eth_ioctl		= vortex_ioctl,
+#endif
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_vortex,
+#endif
+};
+
+static const struct net_device_ops vortex_netdev_ops = {
+	.ndo_open		= vortex_open,
+	.ndo_stop		= vortex_close,
+	.ndo_start_xmit		= vortex_start_xmit,
+	.ndo_tx_timeout		= vortex_tx_timeout,
+	.ndo_get_stats		= vortex_get_stats,
+#ifdef CONFIG_PCI
+	.ndo_eth_ioctl		= vortex_ioctl,
+#endif
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_vortex,
+#endif
+};
+
+/*
+ * Start up the PCI/EISA device which is described by *gendev.
+ * Return 0 on success.
+ *
+ * NOTE: pdev can be NULL, for the case of a Compaq device
+ */
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
+			 int chip_idx, int card_idx)
+{
+	struct vortex_private *vp;
+	int option;
+	unsigned int eeprom[0x40], checksum = 0;		/* EEPROM contents */
+	__be16 addr[ETH_ALEN / 2];
+	int i, step;
+	struct net_device *dev;
+	static int printed_version;
+	int retval, print_info;
+	struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx];
+	const char *print_name = "3c59x";
+	struct pci_dev *pdev = NULL;
+	struct eisa_device *edev = NULL;
+
+	if (!printed_version) {
+		pr_info("%s", version);
+		printed_version = 1;
+	}
+
+	if (gendev) {
+		if ((pdev = DEVICE_PCI(gendev))) {
+			print_name = pci_name(pdev);
+		}
+
+		if ((edev = DEVICE_EISA(gendev))) {
+			print_name = dev_name(&edev->dev);
+		}
+	}
+
+	dev = alloc_etherdev(sizeof(*vp));
+	retval = -ENOMEM;
+	if (!dev)
+		goto out;
+
+	SET_NETDEV_DEV(dev, gendev);
+	vp = netdev_priv(dev);
+
+	option = global_options;
+
+	/* The lower four bits are the media type. */
+	if (dev->mem_start) {
+		/*
+		 * The 'options' param is passed in as the third arg to the
+		 * LILO 'ether=' argument for non-modular use
+		 */
+		option = dev->mem_start;
+	}
+	else if (card_idx < MAX_UNITS) {
+		if (options[card_idx] >= 0)
+			option = options[card_idx];
+	}
+
+	if (option > 0) {
+		if (option & 0x8000)
+			vortex_debug = 7;
+		if (option & 0x4000)
+			vortex_debug = 2;
+		if (option & 0x0400)
+			vp->enable_wol = 1;
+	}
+
+	print_info = (vortex_debug > 1);
+	if (print_info)
+		pr_info("See Documentation/networking/device_drivers/ethernet/3com/vortex.rst\n");
+
+	pr_info("%s: 3Com %s %s at %p.\n",
+	       print_name,
+	       pdev ? "PCI" : "EISA",
+	       vci->name,
+	       ioaddr);
+
+	dev->base_addr = (unsigned long)ioaddr;
+	dev->irq = irq;
+	dev->mtu = mtu;
+	vp->ioaddr = ioaddr;
+	vp->large_frames = mtu > 1500;
+	vp->drv_flags = vci->drv_flags;
+	vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0;
+	vp->io_size = vci->io_size;
+	vp->card_idx = card_idx;
+	vp->window = -1;
+
+	/* module list only for Compaq device */
+	if (gendev == NULL) {
+		compaq_net_device = dev;
+	}
+
+	/* PCI-only startup logic */
+	if (pdev) {
+		/* enable bus-mastering if necessary */
+		if (vci->flags & PCI_USES_MASTER)
+			pci_set_master(pdev);
+
+		if (vci->drv_flags & IS_VORTEX) {
+			u8 pci_latency;
+			u8 new_latency = 248;
+
+			/* Check the PCI latency value.  On the 3c590 series the latency timer
+			   must be set to the maximum value to avoid data corruption that occurs
+			   when the timer expires during a transfer.  This bug exists the Vortex
+			   chip only. */
+			pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
+			if (pci_latency < new_latency) {
+				pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n",
+					print_name, pci_latency, new_latency);
+				pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
+			}
+		}
+	}
+
+	spin_lock_init(&vp->lock);
+	spin_lock_init(&vp->mii_lock);
+	spin_lock_init(&vp->window_lock);
+	vp->gendev = gendev;
+	vp->mii.dev = dev;
+	vp->mii.mdio_read = mdio_read;
+	vp->mii.mdio_write = mdio_write;
+	vp->mii.phy_id_mask = 0x1f;
+	vp->mii.reg_num_mask = 0x1f;
+
+	/* Makes sure rings are at least 16 byte aligned. */
+	vp->rx_ring = dma_alloc_coherent(gendev, sizeof(struct boom_rx_desc) * RX_RING_SIZE
+					   + sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+					   &vp->rx_ring_dma, GFP_KERNEL);
+	retval = -ENOMEM;
+	if (!vp->rx_ring)
+		goto free_device;
+
+	vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE);
+	vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
+
+	/* if we are a PCI driver, we store info in pdev->driver_data
+	 * instead of a module list */
+	if (pdev)
+		pci_set_drvdata(pdev, dev);
+	if (edev)
+		eisa_set_drvdata(edev, dev);
+
+	vp->media_override = 7;
+	if (option >= 0) {
+		vp->media_override = ((option & 7) == 2)  ?  0  :  option & 15;
+		if (vp->media_override != 7)
+			vp->medialock = 1;
+		vp->full_duplex = (option & 0x200) ? 1 : 0;
+		vp->bus_master = (option & 16) ? 1 : 0;
+	}
+
+	if (global_full_duplex > 0)
+		vp->full_duplex = 1;
+	if (global_enable_wol > 0)
+		vp->enable_wol = 1;
+
+	if (card_idx < MAX_UNITS) {
+		if (full_duplex[card_idx] > 0)
+			vp->full_duplex = 1;
+		if (flow_ctrl[card_idx] > 0)
+			vp->flow_ctrl = 1;
+		if (enable_wol[card_idx] > 0)
+			vp->enable_wol = 1;
+	}
+
+	vp->mii.force_media = vp->full_duplex;
+	vp->options = option;
+	/* Read the station address from the EEPROM. */
+	{
+		int base;
+
+		if (vci->drv_flags & EEPROM_8BIT)
+			base = 0x230;
+		else if (vci->drv_flags & EEPROM_OFFSET)
+			base = EEPROM_Read + 0x30;
+		else
+			base = EEPROM_Read;
+
+		for (i = 0; i < 0x40; i++) {
+			int timer;
+			window_write16(vp, base + i, 0, Wn0EepromCmd);
+			/* Pause for at least 162 us. for the read to take place. */
+			for (timer = 10; timer >= 0; timer--) {
+				udelay(162);
+				if ((window_read16(vp, 0, Wn0EepromCmd) &
+				     0x8000) == 0)
+					break;
+			}
+			eeprom[i] = window_read16(vp, 0, Wn0EepromData);
+		}
+	}
+	for (i = 0; i < 0x18; i++)
+		checksum ^= eeprom[i];
+	checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	if (checksum != 0x00) {		/* Grrr, needless incompatible change 3Com. */
+		while (i < 0x21)
+			checksum ^= eeprom[i++];
+		checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	}
+	if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+	for (i = 0; i < 3; i++)
+		addr[i] = htons(eeprom[i + 10]);
+	eth_hw_addr_set(dev, (u8 *)addr);
+	if (print_info)
+		pr_cont(" %pM", dev->dev_addr);
+	/* Unfortunately an all zero eeprom passes the checksum and this
+	   gets found in the wild in failure cases. Crypto is hard 8) */
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		retval = -EINVAL;
+		pr_err("*** EEPROM MAC address is invalid.\n");
+		goto free_ring;	/* With every pack */
+	}
+	for (i = 0; i < 6; i++)
+		window_write8(vp, dev->dev_addr[i], 2, i);
+
+	if (print_info)
+		pr_cont(", IRQ %d\n", dev->irq);
+	/* Tell them about an invalid IRQ. */
+	if (dev->irq <= 0 || dev->irq >= nr_irqs)
+		pr_warn(" *** Warning: IRQ %d is unlikely to work! ***\n",
+			dev->irq);
+
+	step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1;
+	if (print_info) {
+		pr_info("  product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n",
+			eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
+			step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
+	}
+
+
+	if (pdev && vci->drv_flags & HAS_CB_FNS) {
+		unsigned short n;
+
+		vp->cb_fn_base = pci_iomap(pdev, 2, 0);
+		if (!vp->cb_fn_base) {
+			retval = -ENOMEM;
+			goto free_ring;
+		}
+
+		if (print_info) {
+			pr_info("%s: CardBus functions mapped %16.16llx->%p\n",
+				print_name,
+				(unsigned long long)pci_resource_start(pdev, 2),
+				vp->cb_fn_base);
+		}
+
+		n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010;
+		if (vp->drv_flags & INVERT_LED_PWR)
+			n |= 0x10;
+		if (vp->drv_flags & INVERT_MII_PWR)
+			n |= 0x4000;
+		window_write16(vp, n, 2, Wn2_ResetOptions);
+		if (vp->drv_flags & WNO_XCVR_PWR) {
+			window_write16(vp, 0x0800, 0, 0);
+		}
+	}
+
+	/* Extract our information from the EEPROM data. */
+	vp->info1 = eeprom[13];
+	vp->info2 = eeprom[15];
+	vp->capabilities = eeprom[16];
+
+	if (vp->info1 & 0x8000) {
+		vp->full_duplex = 1;
+		if (print_info)
+			pr_info("Full duplex capable\n");
+	}
+
+	{
+		static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+		unsigned int config;
+		vp->available_media = window_read16(vp, 3, Wn3_Options);
+		if ((vp->available_media & 0xff) == 0)		/* Broken 3c916 */
+			vp->available_media = 0x40;
+		config = window_read32(vp, 3, Wn3_Config);
+		if (print_info) {
+			pr_debug("  Internal config register is %4.4x, transceivers %#x.\n",
+				config, window_read16(vp, 3, Wn3_Options));
+			pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+				   8 << RAM_SIZE(config),
+				   RAM_WIDTH(config) ? "word" : "byte",
+				   ram_split[RAM_SPLIT(config)],
+				   AUTOSELECT(config) ? "autoselect/" : "",
+				   XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" :
+				   media_tbl[XCVR(config)].name);
+		}
+		vp->default_media = XCVR(config);
+		if (vp->default_media == XCVR_NWAY)
+			vp->has_nway = 1;
+		vp->autoselect = AUTOSELECT(config);
+	}
+
+	if (vp->media_override != 7) {
+		pr_info("%s:  Media override to transceiver type %d (%s).\n",
+				print_name, vp->media_override,
+				media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else
+		dev->if_port = vp->default_media;
+
+	if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) ||
+		dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
+		int phy, phy_idx = 0;
+		mii_preamble_required++;
+		if (vp->drv_flags & EXTRA_PREAMBLE)
+			mii_preamble_required++;
+		mdio_sync(vp, 32);
+		mdio_read(dev, 24, MII_BMSR);
+		for (phy = 0; phy < 32 && phy_idx < 1; phy++) {
+			int mii_status, phyx;
+
+			/*
+			 * For the 3c905CX we look at index 24 first, because it bogusly
+			 * reports an external PHY at all indices
+			 */
+			if (phy == 0)
+				phyx = 24;
+			else if (phy <= 24)
+				phyx = phy - 1;
+			else
+				phyx = phy;
+			mii_status = mdio_read(dev, phyx, MII_BMSR);
+			if (mii_status  &&  mii_status != 0xffff) {
+				vp->phys[phy_idx++] = phyx;
+				if (print_info) {
+					pr_info("  MII transceiver found at address %d, status %4x.\n",
+						phyx, mii_status);
+				}
+				if ((mii_status & 0x0040) == 0)
+					mii_preamble_required++;
+			}
+		}
+		mii_preamble_required--;
+		if (phy_idx == 0) {
+			pr_warn("  ***WARNING*** No MII transceivers found!\n");
+			vp->phys[0] = 24;
+		} else {
+			vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
+			if (vp->full_duplex) {
+				/* Only advertise the FD media types. */
+				vp->advertising &= ~0x02A0;
+				mdio_write(dev, vp->phys[0], 4, vp->advertising);
+			}
+		}
+		vp->mii.phy_id = vp->phys[0];
+	}
+
+	if (vp->capabilities & CapBusMaster) {
+		vp->full_bus_master_tx = 1;
+		if (print_info) {
+			pr_info("  Enabling bus-master transmits and %s receives.\n",
+			(vp->info2 & 1) ? "early" : "whole-frame" );
+		}
+		vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
+		vp->bus_master = 0;		/* AKPM: vortex only */
+	}
+
+	/* The 3c59x-specific entries in the device structure. */
+	if (vp->full_bus_master_tx) {
+		dev->netdev_ops = &boomrang_netdev_ops;
+		/* Actually, it still should work with iommu. */
+		if (card_idx < MAX_UNITS &&
+		    ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) ||
+				hw_checksums[card_idx] == 1)) {
+			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+		}
+	} else
+		dev->netdev_ops =  &vortex_netdev_ops;
+
+	if (print_info) {
+		pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
+				print_name,
+				(dev->features & NETIF_F_SG) ? "en":"dis",
+				(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
+	}
+
+	dev->ethtool_ops = &vortex_ethtool_ops;
+	dev->watchdog_timeo = (watchdog * HZ) / 1000;
+
+	if (pdev) {
+		vp->pm_state_valid = 1;
+		pci_save_state(pdev);
+		acpi_set_WOL(dev);
+	}
+	retval = register_netdev(dev);
+	if (retval == 0)
+		return 0;
+
+free_ring:
+	dma_free_coherent(&pdev->dev,
+		sizeof(struct boom_rx_desc) * RX_RING_SIZE +
+		sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+		vp->rx_ring, vp->rx_ring_dma);
+free_device:
+	free_netdev(dev);
+	pr_err(PFX "vortex_probe1 fails.  Returns %d\n", retval);
+out:
+	return retval;
+}
+
+static void
+issue_and_wait(struct net_device *dev, int cmd)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int i;
+
+	iowrite16(cmd, ioaddr + EL3_CMD);
+	for (i = 0; i < 2000; i++) {
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
+			return;
+	}
+
+	/* OK, that didn't work.  Do it the slow way.  One second */
+	for (i = 0; i < 100000; i++) {
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
+			if (vortex_debug > 1)
+				pr_info("%s: command 0x%04x took %d usecs\n",
+					   dev->name, cmd, i * 10);
+			return;
+		}
+		udelay(10);
+	}
+	pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
+			   dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
+}
+
+static void
+vortex_set_duplex(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	pr_info("%s:  setting %s-duplex.\n",
+		dev->name, (vp->full_duplex) ? "full" : "half");
+
+	/* Set the full-duplex bit. */
+	window_write16(vp,
+		       ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+		       (vp->large_frames ? 0x40 : 0) |
+		       ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
+			0x100 : 0),
+		       3, Wn3_MAC_Ctrl);
+}
+
+static void vortex_check_media(struct net_device *dev, unsigned int init)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	unsigned int ok_to_print = 0;
+
+	if (vortex_debug > 3)
+		ok_to_print = 1;
+
+	if (mii_check_media(&vp->mii, ok_to_print, init)) {
+		vp->full_duplex = vp->mii.full_duplex;
+		vortex_set_duplex(dev);
+	} else if (init) {
+		vortex_set_duplex(dev);
+	}
+}
+
+static int
+vortex_up(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	unsigned int config;
+	int i, mii_reg5, err = 0;
+
+	if (VORTEX_PCI(vp)) {
+		pci_set_power_state(VORTEX_PCI(vp), PCI_D0);	/* Go active */
+		if (vp->pm_state_valid)
+			pci_restore_state(VORTEX_PCI(vp));
+		err = pci_enable_device(VORTEX_PCI(vp));
+		if (err) {
+			pr_warn("%s: Could not enable device\n", dev->name);
+			goto err_out;
+		}
+	}
+
+	/* Before initializing select the active media port. */
+	config = window_read32(vp, 3, Wn3_Config);
+
+	if (vp->media_override != 7) {
+		pr_info("%s: Media override to transceiver %d (%s).\n",
+			   dev->name, vp->media_override,
+			   media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else if (vp->autoselect) {
+		if (vp->has_nway) {
+			if (vortex_debug > 1)
+				pr_info("%s: using NWAY device table, not %d\n",
+								dev->name, dev->if_port);
+			dev->if_port = XCVR_NWAY;
+		} else {
+			/* Find first available media type, starting with 100baseTx. */
+			dev->if_port = XCVR_100baseTx;
+			while (! (vp->available_media & media_tbl[dev->if_port].mask))
+				dev->if_port = media_tbl[dev->if_port].next;
+			if (vortex_debug > 1)
+				pr_info("%s: first available media type: %s\n",
+					dev->name, media_tbl[dev->if_port].name);
+		}
+	} else {
+		dev->if_port = vp->default_media;
+		if (vortex_debug > 1)
+			pr_info("%s: using default media %s\n",
+				dev->name, media_tbl[dev->if_port].name);
+	}
+
+	timer_setup(&vp->timer, vortex_timer, 0);
+	mod_timer(&vp->timer, RUN_AT(media_tbl[dev->if_port].wait));
+
+	if (vortex_debug > 1)
+		pr_debug("%s: Initial media type %s.\n",
+			   dev->name, media_tbl[dev->if_port].name);
+
+	vp->full_duplex = vp->mii.force_media;
+	config = BFINS(config, dev->if_port, 20, 4);
+	if (vortex_debug > 6)
+		pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
+	window_write32(vp, config, 3, Wn3_Config);
+
+	if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
+		mdio_read(dev, vp->phys[0], MII_BMSR);
+		mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
+		vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
+		vp->mii.full_duplex = vp->full_duplex;
+
+		vortex_check_media(dev, 1);
+	}
+	else
+		vortex_set_duplex(dev);
+
+	issue_and_wait(dev, TxReset);
+	/*
+	 * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+	 */
+	issue_and_wait(dev, RxReset|0x04);
+
+
+	iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+	if (vortex_debug > 1) {
+		pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
+			   dev->name, dev->irq, window_read16(vp, 4, Wn4_Media));
+	}
+
+	/* Set the station address and mask in window 2 each time opened. */
+	for (i = 0; i < 6; i++)
+		window_write8(vp, dev->dev_addr[i], 2, i);
+	for (; i < 12; i+=2)
+		window_write16(vp, 0, 2, i);
+
+	if (vp->cb_fn_base) {
+		unsigned short n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010;
+		if (vp->drv_flags & INVERT_LED_PWR)
+			n |= 0x10;
+		if (vp->drv_flags & INVERT_MII_PWR)
+			n |= 0x4000;
+		window_write16(vp, n, 2, Wn2_ResetOptions);
+	}
+
+	if (dev->if_port == XCVR_10base2)
+		/* Start the thinnet transceiver. We should really wait 50ms...*/
+		iowrite16(StartCoax, ioaddr + EL3_CMD);
+	if (dev->if_port != XCVR_NWAY) {
+		window_write16(vp,
+			       (window_read16(vp, 4, Wn4_Media) &
+				~(Media_10TP|Media_SQE)) |
+			       media_tbl[dev->if_port].media_bits,
+			       4, Wn4_Media);
+	}
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
+	for (i = 0; i < 10; i++)
+		window_read8(vp, 6, i);
+	window_read16(vp, 6, 10);
+	window_read16(vp, 6, 12);
+	/* New: On the Vortex we must also clear the BadSSD counter. */
+	window_read8(vp, 4, 12);
+	/* ..and on the Boomerang we enable the extra statistics bits. */
+	window_write16(vp, 0x0040, 4, Wn4_NetDiag);
+
+	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+		vp->cur_rx = 0;
+		/* Initialize the RxEarly register as recommended. */
+		iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		iowrite32(0x0020, ioaddr + PktStatus);
+		iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr);
+	}
+	if (vp->full_bus_master_tx) { 		/* Boomerang bus master Tx. */
+		vp->cur_tx = vp->dirty_tx = 0;
+		if (vp->drv_flags & IS_BOOMERANG)
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+		/* Clear the Rx, Tx rings. */
+		for (i = 0; i < RX_RING_SIZE; i++)	/* AKPM: this is done in vortex_open, too */
+			vp->rx_ring[i].status = 0;
+		for (i = 0; i < TX_RING_SIZE; i++)
+			vp->tx_skbuff[i] = NULL;
+		iowrite32(0, ioaddr + DownListPtr);
+	}
+	/* Set receiver mode: presumably accept b-case and phys addr only. */
+	set_rx_mode(dev);
+	/* enable 802.1q tagged frames */
+	set_8021q_mode(dev, 1);
+	iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+	iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete|
+		(vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+		(vp->full_bus_master_rx ? UpComplete : RxComplete) |
+		(vp->bus_master ? DMADone : 0);
+	vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable |
+		(vp->full_bus_master_rx ? 0 : RxComplete) |
+		StatsFull | HostError | TxComplete | IntReq
+		| (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete;
+	iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+		 ioaddr + EL3_CMD);
+	iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
+	if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
+		iowrite32(0x8000, vp->cb_fn_base + 4);
+	netif_start_queue (dev);
+	netdev_reset_queue(dev);
+err_out:
+	return err;
+}
+
+static int
+vortex_open(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int i;
+	int retval;
+	dma_addr_t dma;
+
+	/* Use the now-standard shared IRQ implementation. */
+	if ((retval = request_irq(dev->irq, vortex_boomerang_interrupt, IRQF_SHARED, dev->name, dev))) {
+		pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+		goto err;
+	}
+
+	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+		if (vortex_debug > 2)
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			struct sk_buff *skb;
+			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
+			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
+			vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
+
+			skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+						 GFP_KERNEL);
+			vp->rx_skbuff[i] = skb;
+			if (skb == NULL)
+				break;			/* Bad news!  */
+
+			skb_reserve(skb, NET_IP_ALIGN);	/* Align IP on 16 byte boundaries */
+			dma = dma_map_single(vp->gendev, skb->data,
+					     PKT_BUF_SZ, DMA_FROM_DEVICE);
+			if (dma_mapping_error(vp->gendev, dma))
+				break;
+			vp->rx_ring[i].addr = cpu_to_le32(dma);
+		}
+		if (i != RX_RING_SIZE) {
+			pr_emerg("%s: no memory for rx ring\n", dev->name);
+			retval = -ENOMEM;
+			goto err_free_skb;
+		}
+		/* Wrap the ring. */
+		vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma);
+	}
+
+	retval = vortex_up(dev);
+	if (!retval)
+		goto out;
+
+err_free_skb:
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (vp->rx_skbuff[i]) {
+			dev_kfree_skb(vp->rx_skbuff[i]);
+			vp->rx_skbuff[i] = NULL;
+		}
+	}
+	free_irq(dev->irq, dev);
+err:
+	if (vortex_debug > 1)
+		pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
+out:
+	return retval;
+}
+
+static void
+vortex_timer(struct timer_list *t)
+{
+	struct vortex_private *vp = from_timer(vp, t, timer);
+	struct net_device *dev = vp->mii.dev;
+	void __iomem *ioaddr = vp->ioaddr;
+	int next_tick = 60*HZ;
+	int ok = 0;
+	int media_status;
+
+	if (vortex_debug > 2) {
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
+			   dev->name, media_tbl[dev->if_port].name);
+		pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+	}
+
+	media_status = window_read16(vp, 4, Wn4_Media);
+	switch (dev->if_port) {
+	case XCVR_10baseT:  case XCVR_100baseTx:  case XCVR_100baseFx:
+		if (media_status & Media_LnkBeat) {
+			netif_carrier_on(dev);
+			ok = 1;
+			if (vortex_debug > 1)
+				pr_debug("%s: Media %s has link beat, %x.\n",
+					   dev->name, media_tbl[dev->if_port].name, media_status);
+		} else {
+			netif_carrier_off(dev);
+			if (vortex_debug > 1) {
+				pr_debug("%s: Media %s has no link beat, %x.\n",
+					   dev->name, media_tbl[dev->if_port].name, media_status);
+			}
+		}
+		break;
+	case XCVR_MII: case XCVR_NWAY:
+		{
+			ok = 1;
+			vortex_check_media(dev, 0);
+		}
+		break;
+	  default:					/* Other media types handled by Tx timeouts. */
+		if (vortex_debug > 1)
+		  pr_debug("%s: Media %s has no indication, %x.\n",
+				 dev->name, media_tbl[dev->if_port].name, media_status);
+		ok = 1;
+	}
+
+	if (dev->flags & IFF_SLAVE || !netif_carrier_ok(dev))
+		next_tick = 5*HZ;
+
+	if (vp->medialock)
+		goto leave_media_alone;
+
+	if (!ok) {
+		unsigned int config;
+
+		spin_lock_irq(&vp->lock);
+
+		do {
+			dev->if_port = media_tbl[dev->if_port].next;
+		} while ( ! (vp->available_media & media_tbl[dev->if_port].mask));
+		if (dev->if_port == XCVR_Default) { /* Go back to default. */
+		  dev->if_port = vp->default_media;
+		  if (vortex_debug > 1)
+			pr_debug("%s: Media selection failing, using default %s port.\n",
+				   dev->name, media_tbl[dev->if_port].name);
+		} else {
+			if (vortex_debug > 1)
+				pr_debug("%s: Media selection failed, now trying %s port.\n",
+					   dev->name, media_tbl[dev->if_port].name);
+			next_tick = media_tbl[dev->if_port].wait;
+		}
+		window_write16(vp,
+			       (media_status & ~(Media_10TP|Media_SQE)) |
+			       media_tbl[dev->if_port].media_bits,
+			       4, Wn4_Media);
+
+		config = window_read32(vp, 3, Wn3_Config);
+		config = BFINS(config, dev->if_port, 20, 4);
+		window_write32(vp, config, 3, Wn3_Config);
+
+		iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
+			 ioaddr + EL3_CMD);
+		if (vortex_debug > 1)
+			pr_debug("wrote 0x%08x to Wn3_Config\n", config);
+		/* AKPM: FIXME: Should reset Rx & Tx here.  P60 of 3c90xc.pdf */
+
+		spin_unlock_irq(&vp->lock);
+	}
+
+leave_media_alone:
+	if (vortex_debug > 2)
+	  pr_debug("%s: Media selection timer finished, %s.\n",
+			 dev->name, media_tbl[dev->if_port].name);
+
+	mod_timer(&vp->timer, RUN_AT(next_tick));
+	if (vp->deferred)
+		iowrite16(FakeIntr, ioaddr + EL3_CMD);
+}
+
+static void vortex_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+
+	pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+		   dev->name, ioread8(ioaddr + TxStatus),
+		   ioread16(ioaddr + EL3_STATUS));
+	pr_err("  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+			window_read16(vp, 4, Wn4_NetDiag),
+			window_read16(vp, 4, Wn4_Media),
+			ioread32(ioaddr + PktStatus),
+			window_read16(vp, 4, Wn4_FIFODiag));
+	/* Slight code bloat to be user friendly. */
+	if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
+		pr_err("%s: Transmitter encountered 16 collisions --"
+			   " network cable problem?\n", dev->name);
+	if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
+		pr_err("%s: Interrupt posted but not delivered --"
+			   " IRQ blocked by another device?\n", dev->name);
+		/* Bad idea here.. but we might as well handle a few events. */
+		vortex_boomerang_interrupt(dev->irq, dev);
+	}
+
+	if (vortex_debug > 0)
+		dump_tx_ring(dev);
+
+	issue_and_wait(dev, TxReset);
+
+	dev->stats.tx_errors++;
+	if (vp->full_bus_master_tx) {
+		pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
+		if (vp->cur_tx - vp->dirty_tx > 0  &&  ioread32(ioaddr + DownListPtr) == 0)
+			iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
+				 ioaddr + DownListPtr);
+		if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE) {
+			netif_wake_queue (dev);
+			netdev_reset_queue (dev);
+		}
+		if (vp->drv_flags & IS_BOOMERANG)
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
+		iowrite16(DownUnstall, ioaddr + EL3_CMD);
+	} else {
+		dev->stats.tx_dropped++;
+		netif_wake_queue(dev);
+		netdev_reset_queue(dev);
+	}
+	/* Issue Tx Enable */
+	iowrite16(TxEnable, ioaddr + EL3_CMD);
+	netif_trans_update(dev); /* prevent tx timeout */
+}
+
+/*
+ * Handle uncommon interrupt sources.  This is a separate routine to minimize
+ * the cache impact.
+ */
+static void
+vortex_error(struct net_device *dev, int status)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int do_tx_reset = 0, reset_mask = 0;
+	unsigned char tx_status = 0;
+
+	if (vortex_debug > 2) {
+		pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
+	}
+
+	if (status & TxComplete) {			/* Really "TxError" for us. */
+		tx_status = ioread8(ioaddr + TxStatus);
+		/* Presumably a tx-timeout. We must merely re-enable. */
+		if (vortex_debug > 2 ||
+		    (tx_status != 0x88 && vortex_debug > 0)) {
+			pr_err("%s: Transmit error, Tx status register %2.2x.\n",
+				   dev->name, tx_status);
+			if (tx_status == 0x82) {
+				pr_err("Probably a duplex mismatch.  See "
+						"Documentation/networking/device_drivers/ethernet/3com/vortex.rst\n");
+			}
+			dump_tx_ring(dev);
+		}
+		if (tx_status & 0x14)  dev->stats.tx_fifo_errors++;
+		if (tx_status & 0x38)  dev->stats.tx_aborted_errors++;
+		if (tx_status & 0x08)  vp->xstats.tx_max_collisions++;
+		iowrite8(0, ioaddr + TxStatus);
+		if (tx_status & 0x30) {			/* txJabber or txUnderrun */
+			do_tx_reset = 1;
+		} else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET))  {	/* maxCollisions */
+			do_tx_reset = 1;
+			reset_mask = 0x0108;		/* Reset interface logic, but not download logic */
+		} else {				/* Merely re-enable the transmitter. */
+			iowrite16(TxEnable, ioaddr + EL3_CMD);
+		}
+	}
+
+	if (status & RxEarly)				/* Rx early is unused. */
+		iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD);
+
+	if (status & StatsFull) {			/* Empty statistics. */
+		static int DoneDidThat;
+		if (vortex_debug > 4)
+			pr_debug("%s: Updating stats.\n", dev->name);
+		update_stats(ioaddr, dev);
+		/* HACK: Disable statistics as an interrupt source. */
+		/* This occurs when we have the wrong media type! */
+		if (DoneDidThat == 0  &&
+			ioread16(ioaddr + EL3_STATUS) & StatsFull) {
+			pr_warn("%s: Updating statistics failed, disabling stats as an interrupt source\n",
+				dev->name);
+			iowrite16(SetIntrEnb |
+				  (window_read16(vp, 5, 10) & ~StatsFull),
+				  ioaddr + EL3_CMD);
+			vp->intr_enable &= ~StatsFull;
+			DoneDidThat++;
+		}
+	}
+	if (status & IntReq) {		/* Restore all interrupt sources.  */
+		iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+		iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
+	}
+	if (status & HostError) {
+		u16 fifo_diag;
+		fifo_diag = window_read16(vp, 4, Wn4_FIFODiag);
+		pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
+			   dev->name, fifo_diag);
+		/* Adapter failure requires Tx/Rx reset and reinit. */
+		if (vp->full_bus_master_tx) {
+			int bus_status = ioread32(ioaddr + PktStatus);
+			/* 0x80000000 PCI master abort. */
+			/* 0x40000000 PCI target abort. */
+			if (vortex_debug)
+				pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+
+			/* In this case, blow the card away */
+			/* Must not enter D3 or we can't legally issue the reset! */
+			vortex_down(dev, 0);
+			issue_and_wait(dev, TotalReset | 0xff);
+			vortex_up(dev);		/* AKPM: bug.  vortex_up() assumes that the rx ring is full. It may not be. */
+		} else if (fifo_diag & 0x0400)
+			do_tx_reset = 1;
+		if (fifo_diag & 0x3000) {
+			/* Reset Rx fifo and upload logic */
+			issue_and_wait(dev, RxReset|0x07);
+			/* Set the Rx filter to the current state. */
+			set_rx_mode(dev);
+			/* enable 802.1q VLAN tagged frames */
+			set_8021q_mode(dev, 1);
+			iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+			iowrite16(AckIntr | HostError, ioaddr + EL3_CMD);
+		}
+	}
+
+	if (do_tx_reset) {
+		issue_and_wait(dev, TxReset|reset_mask);
+		iowrite16(TxEnable, ioaddr + EL3_CMD);
+		if (!vp->full_bus_master_tx)
+			netif_wake_queue(dev);
+	}
+}
+
+static netdev_tx_t
+vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int skblen = skb->len;
+
+	/* Put out the doubleword header... */
+	iowrite32(skb->len, ioaddr + TX_FIFO);
+	if (vp->bus_master) {
+		/* Set the bus-master controller to transfer the packet. */
+		int len = (skb->len + 3) & ~3;
+		vp->tx_skb_dma = dma_map_single(vp->gendev, skb->data, len,
+						DMA_TO_DEVICE);
+		if (dma_mapping_error(vp->gendev, vp->tx_skb_dma)) {
+			dev_kfree_skb_any(skb);
+			dev->stats.tx_dropped++;
+			return NETDEV_TX_OK;
+		}
+
+		spin_lock_irq(&vp->window_lock);
+		window_set(vp, 7);
+		iowrite32(vp->tx_skb_dma, ioaddr + Wn7_MasterAddr);
+		iowrite16(len, ioaddr + Wn7_MasterLen);
+		spin_unlock_irq(&vp->window_lock);
+		vp->tx_skb = skb;
+		skb_tx_timestamp(skb);
+		iowrite16(StartDMADown, ioaddr + EL3_CMD);
+		/* netif_wake_queue() will be called at the DMADone interrupt. */
+	} else {
+		/* ... and the packet rounded to a doubleword. */
+		skb_tx_timestamp(skb);
+		iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+		dev_consume_skb_any (skb);
+		if (ioread16(ioaddr + TxFree) > 1536) {
+			netif_start_queue (dev);	/* AKPM: redundant? */
+		} else {
+			/* Interrupt us when the FIFO has room for max-sized packet. */
+			netif_stop_queue(dev);
+			iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		}
+	}
+
+	netdev_sent_queue(dev, skblen);
+
+	/* Clear the Tx status stack. */
+	{
+		int tx_status;
+		int i = 32;
+
+		while (--i > 0	&&	(tx_status = ioread8(ioaddr + TxStatus)) > 0) {
+			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
+				if (vortex_debug > 2)
+				  pr_debug("%s: Tx error, status %2.2x.\n",
+						 dev->name, tx_status);
+				if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
+				if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+				if (tx_status & 0x30) {
+					issue_and_wait(dev, TxReset);
+				}
+				iowrite16(TxEnable, ioaddr + EL3_CMD);
+			}
+			iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+		}
+	}
+	return NETDEV_TX_OK;
+}
+
+static netdev_tx_t
+boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	/* Calculate the next Tx descriptor entry. */
+	int entry = vp->cur_tx % TX_RING_SIZE;
+	int skblen = skb->len;
+	struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
+	unsigned long flags;
+	dma_addr_t dma_addr;
+
+	if (vortex_debug > 6) {
+		pr_debug("boomerang_start_xmit()\n");
+		pr_debug("%s: Trying to send a packet, Tx index %d.\n",
+			   dev->name, vp->cur_tx);
+	}
+
+	/*
+	 * We can't allow a recursion from our interrupt handler back into the
+	 * tx routine, as they take the same spin lock, and that causes
+	 * deadlock.  Just return NETDEV_TX_BUSY and let the stack try again in
+	 * a bit
+	 */
+	if (vp->handling_irq)
+		return NETDEV_TX_BUSY;
+
+	if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
+		if (vortex_debug > 0)
+			pr_warn("%s: BUG! Tx Ring full, refusing to send buffer\n",
+				dev->name);
+		netif_stop_queue(dev);
+		return NETDEV_TX_BUSY;
+	}
+
+	vp->tx_skbuff[entry] = skb;
+
+	vp->tx_ring[entry].next = 0;
+#if DO_ZEROCOPY
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+			vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
+	else
+			vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);
+
+	if (!skb_shinfo(skb)->nr_frags) {
+		dma_addr = dma_map_single(vp->gendev, skb->data, skb->len,
+					  DMA_TO_DEVICE);
+		if (dma_mapping_error(vp->gendev, dma_addr))
+			goto out_dma_err;
+
+		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr);
+		vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG);
+	} else {
+		int i;
+
+		dma_addr = dma_map_single(vp->gendev, skb->data,
+					  skb_headlen(skb), DMA_TO_DEVICE);
+		if (dma_mapping_error(vp->gendev, dma_addr))
+			goto out_dma_err;
+
+		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr);
+		vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb));
+
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+			dma_addr = skb_frag_dma_map(vp->gendev, frag,
+						    0,
+						    skb_frag_size(frag),
+						    DMA_TO_DEVICE);
+			if (dma_mapping_error(vp->gendev, dma_addr)) {
+				for(i = i-1; i >= 0; i--)
+					dma_unmap_page(vp->gendev,
+						       le32_to_cpu(vp->tx_ring[entry].frag[i+1].addr),
+						       le32_to_cpu(vp->tx_ring[entry].frag[i+1].length),
+						       DMA_TO_DEVICE);
+
+				dma_unmap_single(vp->gendev,
+						 le32_to_cpu(vp->tx_ring[entry].frag[0].addr),
+						 le32_to_cpu(vp->tx_ring[entry].frag[0].length),
+						 DMA_TO_DEVICE);
+
+				goto out_dma_err;
+			}
+
+			vp->tx_ring[entry].frag[i+1].addr =
+						cpu_to_le32(dma_addr);
+
+			if (i == skb_shinfo(skb)->nr_frags-1)
+					vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag)|LAST_FRAG);
+			else
+					vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag));
+		}
+	}
+#else
+	dma_addr = dma_map_single(vp->gendev, skb->data, skb->len, DMA_TO_DEVICE);
+	if (dma_mapping_error(vp->gendev, dma_addr))
+		goto out_dma_err;
+	vp->tx_ring[entry].addr = cpu_to_le32(dma_addr);
+	vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG);
+	vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
+#endif
+
+	spin_lock_irqsave(&vp->lock, flags);
+	/* Wait for the stall to complete. */
+	issue_and_wait(dev, DownStall);
+	prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc));
+	if (ioread32(ioaddr + DownListPtr) == 0) {
+		iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
+		vp->queued_packet++;
+	}
+
+	vp->cur_tx++;
+	netdev_sent_queue(dev, skblen);
+
+	if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) {
+		netif_stop_queue (dev);
+	} else {					/* Clear previous interrupt enable. */
+#if defined(tx_interrupt_mitigation)
+		/* Dubious. If in boomeang_interrupt "faster" cyclone ifdef
+		 * were selected, this would corrupt DN_COMPLETE. No?
+		 */
+		prev_entry->status &= cpu_to_le32(~TxIntrUploaded);
+#endif
+	}
+	skb_tx_timestamp(skb);
+	iowrite16(DownUnstall, ioaddr + EL3_CMD);
+	spin_unlock_irqrestore(&vp->lock, flags);
+out:
+	return NETDEV_TX_OK;
+out_dma_err:
+	dev_err(vp->gendev, "Error mapping dma buffer\n");
+	goto out;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+
+/*
+ * This is the ISR for the vortex series chips.
+ * full_bus_master_tx == 0 && full_bus_master_rx == 0
+ */
+
+static irqreturn_t
+_vortex_interrupt(int irq, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr;
+	int status;
+	int work_done = max_interrupt_work;
+	int handled = 0;
+	unsigned int bytes_compl = 0, pkts_compl = 0;
+
+	ioaddr = vp->ioaddr;
+
+	status = ioread16(ioaddr + EL3_STATUS);
+
+	if (vortex_debug > 6)
+		pr_debug("vortex_interrupt(). status=0x%4x\n", status);
+
+	if ((status & IntLatch) == 0)
+		goto handler_exit;		/* No interrupt: shared IRQs cause this */
+	handled = 1;
+
+	if (status & IntReq) {
+		status |= vp->deferred;
+		vp->deferred = 0;
+	}
+
+	if (status == 0xffff)		/* h/w no longer present (hotplug)? */
+		goto handler_exit;
+
+	if (vortex_debug > 4)
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
+			   dev->name, status, ioread8(ioaddr + Timer));
+
+	spin_lock(&vp->window_lock);
+	window_set(vp, 7);
+
+	do {
+		if (vortex_debug > 5)
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
+					   dev->name, status);
+		if (status & RxComplete)
+			vortex_rx(dev);
+
+		if (status & TxAvailable) {
+			if (vortex_debug > 5)
+				pr_debug("	TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue (dev);
+		}
+
+		if (status & DMADone) {
+			if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) {
+				iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+				dma_unmap_single(vp->gendev, vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, DMA_TO_DEVICE);
+				pkts_compl++;
+				bytes_compl += vp->tx_skb->len;
+				dev_consume_skb_irq(vp->tx_skb); /* Release the transferred buffer */
+				if (ioread16(ioaddr + TxFree) > 1536) {
+					/*
+					 * AKPM: FIXME: I don't think we need this.  If the queue was stopped due to
+					 * insufficient FIFO room, the TxAvailable test will succeed and call
+					 * netif_wake_queue()
+					 */
+					netif_wake_queue(dev);
+				} else { /* Interrupt when FIFO has room for max-sized packet. */
+					iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+					netif_stop_queue(dev);
+				}
+			}
+		}
+		/* Check for all uncommon interrupts at once. */
+		if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) {
+			if (status == 0xffff)
+				break;
+			if (status & RxEarly)
+				vortex_rx(dev);
+			spin_unlock(&vp->window_lock);
+			vortex_error(dev, status);
+			spin_lock(&vp->window_lock);
+			window_set(vp, 7);
+		}
+
+		if (--work_done < 0) {
+			pr_warn("%s: Too much work in interrupt, status %4.4x\n",
+				dev->name, status);
+			/* Disable all pending interrupts. */
+			do {
+				vp->deferred |= status;
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
+					 ioaddr + EL3_CMD);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
+			/* The timer will reenable interrupts. */
+			mod_timer(&vp->timer, jiffies + 1*HZ);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+
+	netdev_completed_queue(dev, pkts_compl, bytes_compl);
+	spin_unlock(&vp->window_lock);
+
+	if (vortex_debug > 4)
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
+			   dev->name, status);
+handler_exit:
+	return IRQ_RETVAL(handled);
+}
+
+/*
+ * This is the ISR for the boomerang series chips.
+ * full_bus_master_tx == 1 && full_bus_master_rx == 1
+ */
+
+static irqreturn_t
+_boomerang_interrupt(int irq, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr;
+	int status;
+	int work_done = max_interrupt_work;
+	int handled = 0;
+	unsigned int bytes_compl = 0, pkts_compl = 0;
+
+	ioaddr = vp->ioaddr;
+
+	vp->handling_irq = 1;
+
+	status = ioread16(ioaddr + EL3_STATUS);
+
+	if (vortex_debug > 6)
+		pr_debug("boomerang_interrupt. status=0x%4x\n", status);
+
+	if ((status & IntLatch) == 0)
+		goto handler_exit;		/* No interrupt: shared IRQs can cause this */
+	handled = 1;
+
+	if (status == 0xffff) {		/* h/w no longer present (hotplug)? */
+		if (vortex_debug > 1)
+			pr_debug("boomerang_interrupt(1): status = 0xffff\n");
+		goto handler_exit;
+	}
+
+	if (status & IntReq) {
+		status |= vp->deferred;
+		vp->deferred = 0;
+	}
+
+	if (vortex_debug > 4)
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
+			   dev->name, status, ioread8(ioaddr + Timer));
+	do {
+		if (vortex_debug > 5)
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
+					   dev->name, status);
+		if (status & UpComplete) {
+			iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
+			if (vortex_debug > 5)
+				pr_debug("boomerang_interrupt->boomerang_rx\n");
+			boomerang_rx(dev);
+		}
+
+		if (status & DownComplete) {
+			unsigned int dirty_tx = vp->dirty_tx;
+
+			iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD);
+			while (vp->cur_tx - dirty_tx > 0) {
+				int entry = dirty_tx % TX_RING_SIZE;
+#if 1	/* AKPM: the latter is faster, but cyclone-only */
+				if (ioread32(ioaddr + DownListPtr) ==
+					vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc))
+					break;			/* It still hasn't been processed. */
+#else
+				if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0)
+					break;			/* It still hasn't been processed. */
+#endif
+
+				if (vp->tx_skbuff[entry]) {
+					struct sk_buff *skb = vp->tx_skbuff[entry];
+#if DO_ZEROCOPY
+					int i;
+					dma_unmap_single(vp->gendev,
+							le32_to_cpu(vp->tx_ring[entry].frag[0].addr),
+							le32_to_cpu(vp->tx_ring[entry].frag[0].length)&0xFFF,
+							DMA_TO_DEVICE);
+
+					for (i=1; i<=skb_shinfo(skb)->nr_frags; i++)
+							dma_unmap_page(vp->gendev,
+											 le32_to_cpu(vp->tx_ring[entry].frag[i].addr),
+											 le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF,
+											 DMA_TO_DEVICE);
+#else
+					dma_unmap_single(vp->gendev,
+						le32_to_cpu(vp->tx_ring[entry].addr), skb->len, DMA_TO_DEVICE);
+#endif
+					pkts_compl++;
+					bytes_compl += skb->len;
+					dev_consume_skb_irq(skb);
+					vp->tx_skbuff[entry] = NULL;
+				} else {
+					pr_debug("boomerang_interrupt: no skb!\n");
+				}
+				/* dev->stats.tx_packets++;  Counted below. */
+				dirty_tx++;
+			}
+			vp->dirty_tx = dirty_tx;
+			if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
+				if (vortex_debug > 6)
+					pr_debug("boomerang_interrupt: wake queue\n");
+				netif_wake_queue (dev);
+			}
+		}
+
+		/* Check for all uncommon interrupts at once. */
+		if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq))
+			vortex_error(dev, status);
+
+		if (--work_done < 0) {
+			pr_warn("%s: Too much work in interrupt, status %4.4x\n",
+				dev->name, status);
+			/* Disable all pending interrupts. */
+			do {
+				vp->deferred |= status;
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
+					 ioaddr + EL3_CMD);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
+			/* The timer will reenable interrupts. */
+			mod_timer(&vp->timer, jiffies + 1*HZ);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+		if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
+			iowrite32(0x8000, vp->cb_fn_base + 4);
+
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
+	netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
+	if (vortex_debug > 4)
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
+			   dev->name, status);
+handler_exit:
+	vp->handling_irq = 0;
+	return IRQ_RETVAL(handled);
+}
+
+static irqreturn_t
+vortex_boomerang_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct vortex_private *vp = netdev_priv(dev);
+	unsigned long flags;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(&vp->lock, flags);
+
+	if (vp->full_bus_master_rx)
+		ret = _boomerang_interrupt(dev->irq, dev);
+	else
+		ret = _vortex_interrupt(dev->irq, dev);
+
+	spin_unlock_irqrestore(&vp->lock, flags);
+
+	return ret;
+}
+
+static int vortex_rx(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int i;
+	short rx_status;
+
+	if (vortex_debug > 5)
+		pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+			   ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
+	while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			unsigned char rx_error = ioread8(ioaddr + RxErrors);
+			if (vortex_debug > 2)
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
+			dev->stats.rx_errors++;
+			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
+			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
+			if (rx_error & 0x04)  dev->stats.rx_frame_errors++;
+			if (rx_error & 0x08)  dev->stats.rx_crc_errors++;
+			if (rx_error & 0x10)  dev->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			int pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+			if (vortex_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				if (vp->bus_master &&
+					! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) {
+					dma_addr_t dma = dma_map_single(vp->gendev, skb_put(skb, pkt_len),
+									   pkt_len, DMA_FROM_DEVICE);
+					iowrite32(dma, ioaddr + Wn7_MasterAddr);
+					iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+					iowrite16(StartDMAUp, ioaddr + EL3_CMD);
+					while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)
+						;
+					dma_unmap_single(vp->gendev, dma, pkt_len, DMA_FROM_DEVICE);
+				} else {
+					ioread32_rep(ioaddr + RX_FIFO,
+					             skb_put(skb, pkt_len),
+						     (pkt_len + 3) >> 2);
+				}
+				iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				/* Wait a limited time to go to next packet. */
+				for (i = 200; i >= 0; i--)
+					if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
+						break;
+				continue;
+			} else if (vortex_debug > 0)
+				pr_notice("%s: No memory to allocate a sk_buff of size %d.\n",
+					dev->name, pkt_len);
+			dev->stats.rx_dropped++;
+		}
+		issue_and_wait(dev, RxDiscard);
+	}
+
+	return 0;
+}
+
+static int
+boomerang_rx(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int entry = vp->cur_rx % RX_RING_SIZE;
+	void __iomem *ioaddr = vp->ioaddr;
+	int rx_status;
+	int rx_work_limit = RX_RING_SIZE;
+
+	if (vortex_debug > 5)
+		pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+
+	while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
+		if (--rx_work_limit < 0)
+			break;
+		if (rx_status & RxDError) { /* Error, update stats. */
+			unsigned char rx_error = rx_status >> 16;
+			if (vortex_debug > 2)
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
+			dev->stats.rx_errors++;
+			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
+			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
+			if (rx_error & 0x04)  dev->stats.rx_frame_errors++;
+			if (rx_error & 0x08)  dev->stats.rx_crc_errors++;
+			if (rx_error & 0x10)  dev->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			int pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb, *newskb;
+			dma_addr_t newdma;
+			dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
+
+			if (vortex_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+
+			/* Check if the packet is long enough to just accept without
+			   copying to a properly sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+			    (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				dma_sync_single_for_cpu(vp->gendev, dma, PKT_BUF_SZ, DMA_FROM_DEVICE);
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				skb_put_data(skb, vp->rx_skbuff[entry]->data,
+					     pkt_len);
+				dma_sync_single_for_device(vp->gendev, dma, PKT_BUF_SZ, DMA_FROM_DEVICE);
+				vp->rx_copy++;
+			} else {
+				/* Pre-allocate the replacement skb.  If it or its
+				 * mapping fails then recycle the buffer thats already
+				 * in place
+				 */
+				newskb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
+				if (!newskb) {
+					dev->stats.rx_dropped++;
+					goto clear_complete;
+				}
+				newdma = dma_map_single(vp->gendev, newskb->data,
+							PKT_BUF_SZ, DMA_FROM_DEVICE);
+				if (dma_mapping_error(vp->gendev, newdma)) {
+					dev->stats.rx_dropped++;
+					consume_skb(newskb);
+					goto clear_complete;
+				}
+
+				/* Pass up the skbuff already on the Rx ring. */
+				skb = vp->rx_skbuff[entry];
+				vp->rx_skbuff[entry] = newskb;
+				vp->rx_ring[entry].addr = cpu_to_le32(newdma);
+				skb_put(skb, pkt_len);
+				dma_unmap_single(vp->gendev, dma, PKT_BUF_SZ, DMA_FROM_DEVICE);
+				vp->rx_nocopy++;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			{					/* Use hardware checksum info. */
+				int csum_bits = rx_status & 0xee000000;
+				if (csum_bits &&
+					(csum_bits == (IPChksumValid | TCPChksumValid) ||
+					 csum_bits == (IPChksumValid | UDPChksumValid))) {
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+					vp->rx_csumhits++;
+				}
+			}
+			netif_rx(skb);
+			dev->stats.rx_packets++;
+		}
+
+clear_complete:
+		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
+		iowrite16(UpUnstall, ioaddr + EL3_CMD);
+		entry = (++vp->cur_rx) % RX_RING_SIZE;
+	}
+	return 0;
+}
+
+static void
+vortex_down(struct net_device *dev, int final_down)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+
+	netdev_reset_queue(dev);
+	netif_stop_queue(dev);
+
+	del_timer_sync(&vp->timer);
+
+	/* Turn off statistics ASAP.  We update dev->stats below. */
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
+
+	/* Disable the receiver and transmitter. */
+	iowrite16(RxDisable, ioaddr + EL3_CMD);
+	iowrite16(TxDisable, ioaddr + EL3_CMD);
+
+	/* Disable receiving 802.1q tagged frames */
+	set_8021q_mode(dev, 0);
+
+	if (dev->if_port == XCVR_10base2)
+		/* Turn off thinnet power.  Green! */
+		iowrite16(StopCoax, ioaddr + EL3_CMD);
+
+	iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+	update_stats(ioaddr, dev);
+	if (vp->full_bus_master_rx)
+		iowrite32(0, ioaddr + UpListPtr);
+	if (vp->full_bus_master_tx)
+		iowrite32(0, ioaddr + DownListPtr);
+
+	if (final_down && VORTEX_PCI(vp)) {
+		vp->pm_state_valid = 1;
+		pci_save_state(VORTEX_PCI(vp));
+		acpi_set_WOL(dev);
+	}
+}
+
+static int
+vortex_close(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int i;
+
+	if (netif_device_present(dev))
+		vortex_down(dev, 1);
+
+	if (vortex_debug > 1) {
+		pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+			   dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
+		pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
+			   " tx_queued %d Rx pre-checksummed %d.\n",
+			   dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
+	}
+
+#if DO_ZEROCOPY
+	if (vp->rx_csumhits &&
+	    (vp->drv_flags & HAS_HWCKSM) == 0 &&
+	    (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
+		pr_warn("%s supports hardware checksums, and we're not using them!\n",
+			dev->name);
+	}
+#endif
+
+	free_irq(dev->irq, dev);
+
+	if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
+		for (i = 0; i < RX_RING_SIZE; i++)
+			if (vp->rx_skbuff[i]) {
+				dma_unmap_single(vp->gendev, le32_to_cpu(vp->rx_ring[i].addr),
+									PKT_BUF_SZ, DMA_FROM_DEVICE);
+				dev_kfree_skb(vp->rx_skbuff[i]);
+				vp->rx_skbuff[i] = NULL;
+			}
+	}
+	if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */
+		for (i = 0; i < TX_RING_SIZE; i++) {
+			if (vp->tx_skbuff[i]) {
+				struct sk_buff *skb = vp->tx_skbuff[i];
+#if DO_ZEROCOPY
+				int k;
+
+				for (k=0; k<=skb_shinfo(skb)->nr_frags; k++)
+						dma_unmap_single(vp->gendev,
+										 le32_to_cpu(vp->tx_ring[i].frag[k].addr),
+										 le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF,
+										 DMA_TO_DEVICE);
+#else
+				dma_unmap_single(vp->gendev, le32_to_cpu(vp->tx_ring[i].addr), skb->len, DMA_TO_DEVICE);
+#endif
+				dev_kfree_skb(skb);
+				vp->tx_skbuff[i] = NULL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void
+dump_tx_ring(struct net_device *dev)
+{
+	if (vortex_debug > 0) {
+		struct vortex_private *vp = netdev_priv(dev);
+		void __iomem *ioaddr = vp->ioaddr;
+
+		if (vp->full_bus_master_tx) {
+			int i;
+			int stalled = ioread32(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
+
+			pr_err("  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+					vp->full_bus_master_tx,
+					vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
+					vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
+			pr_err("  Transmit list %8.8x vs. %p.\n",
+				   ioread32(ioaddr + DownListPtr),
+				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
+			issue_and_wait(dev, DownStall);
+			for (i = 0; i < TX_RING_SIZE; i++) {
+				unsigned int length;
+
+#if DO_ZEROCOPY
+				length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
+#else
+				length = le32_to_cpu(vp->tx_ring[i].length);
+#endif
+				pr_err("  %d: @%p  length %8.8x status %8.8x\n",
+					   i, &vp->tx_ring[i], length,
+					   le32_to_cpu(vp->tx_ring[i].status));
+			}
+			if (!stalled)
+				iowrite16(DownUnstall, ioaddr + EL3_CMD);
+		}
+	}
+}
+
+static struct net_device_stats *vortex_get_stats(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	unsigned long flags;
+
+	if (netif_device_present(dev)) {	/* AKPM: Used to be netif_running */
+		spin_lock_irqsave (&vp->lock, flags);
+		update_stats(ioaddr, dev);
+		spin_unlock_irqrestore (&vp->lock, flags);
+	}
+	return &dev->stats;
+}
+
+/*  Update statistics.
+	Unlike with the EL3 we need not worry about interrupts changing
+	the window setting from underneath us, but we must still guard
+	against a race condition with a StatsUpdate interrupt updating the
+	table.  This is done by checking that the ASM (!) code generated uses
+	atomic updates with '+='.
+	*/
+static void update_stats(void __iomem *ioaddr, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
+	/* Switch to the stats window, and read everything. */
+	dev->stats.tx_carrier_errors		+= window_read8(vp, 6, 0);
+	dev->stats.tx_heartbeat_errors		+= window_read8(vp, 6, 1);
+	dev->stats.tx_window_errors		+= window_read8(vp, 6, 4);
+	dev->stats.rx_fifo_errors		+= window_read8(vp, 6, 5);
+	dev->stats.tx_packets			+= window_read8(vp, 6, 6);
+	dev->stats.tx_packets			+= (window_read8(vp, 6, 9) &
+						    0x30) << 4;
+	/* Rx packets	*/			window_read8(vp, 6, 7);   /* Must read to clear */
+	/* Don't bother with register 9, an extension of registers 6&7.
+	   If we do use the 6&7 values the atomic update assumption above
+	   is invalid. */
+	dev->stats.rx_bytes 			+= window_read16(vp, 6, 10);
+	dev->stats.tx_bytes 			+= window_read16(vp, 6, 12);
+	/* Extra stats for get_ethtool_stats() */
+	vp->xstats.tx_multiple_collisions	+= window_read8(vp, 6, 2);
+	vp->xstats.tx_single_collisions         += window_read8(vp, 6, 3);
+	vp->xstats.tx_deferred			+= window_read8(vp, 6, 8);
+	vp->xstats.rx_bad_ssd			+= window_read8(vp, 4, 12);
+
+	dev->stats.collisions = vp->xstats.tx_multiple_collisions
+		+ vp->xstats.tx_single_collisions
+		+ vp->xstats.tx_max_collisions;
+
+	{
+		u8 up = window_read8(vp, 4, 13);
+		dev->stats.rx_bytes += (up & 0x0f) << 16;
+		dev->stats.tx_bytes += (up & 0xf0) << 12;
+	}
+}
+
+static int vortex_nway_reset(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	return mii_nway_restart(&vp->mii);
+}
+
+static int vortex_get_link_ksettings(struct net_device *dev,
+				     struct ethtool_link_ksettings *cmd)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	mii_ethtool_get_link_ksettings(&vp->mii, cmd);
+
+	return 0;
+}
+
+static int vortex_set_link_ksettings(struct net_device *dev,
+				     const struct ethtool_link_ksettings *cmd)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	return mii_ethtool_set_link_ksettings(&vp->mii, cmd);
+}
+
+static u32 vortex_get_msglevel(struct net_device *dev)
+{
+	return vortex_debug;
+}
+
+static void vortex_set_msglevel(struct net_device *dev, u32 dbg)
+{
+	vortex_debug = dbg;
+}
+
+static int vortex_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return VORTEX_NUM_STATS;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void vortex_get_ethtool_stats(struct net_device *dev,
+	struct ethtool_stats *stats, u64 *data)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vp->lock, flags);
+	update_stats(ioaddr, dev);
+	spin_unlock_irqrestore(&vp->lock, flags);
+
+	data[0] = vp->xstats.tx_deferred;
+	data[1] = vp->xstats.tx_max_collisions;
+	data[2] = vp->xstats.tx_multiple_collisions;
+	data[3] = vp->xstats.tx_single_collisions;
+	data[4] = vp->xstats.rx_bad_ssd;
+}
+
+
+static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	switch (stringset) {
+	case ETH_SS_STATS:
+		memcpy(data, &ethtool_stats_keys, sizeof(ethtool_stats_keys));
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+}
+
+static void vortex_get_drvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+	if (VORTEX_PCI(vp)) {
+		strscpy(info->bus_info, pci_name(VORTEX_PCI(vp)),
+			sizeof(info->bus_info));
+	} else {
+		if (VORTEX_EISA(vp))
+			strscpy(info->bus_info, dev_name(vp->gendev),
+				sizeof(info->bus_info));
+		else
+			snprintf(info->bus_info, sizeof(info->bus_info),
+				"EISA 0x%lx %d", dev->base_addr, dev->irq);
+	}
+}
+
+static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	if (!VORTEX_PCI(vp))
+		return;
+
+	wol->supported = WAKE_MAGIC;
+
+	wol->wolopts = 0;
+	if (vp->enable_wol)
+		wol->wolopts |= WAKE_MAGIC;
+}
+
+static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	if (!VORTEX_PCI(vp))
+		return -EOPNOTSUPP;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		vp->enable_wol = 1;
+	else
+		vp->enable_wol = 0;
+	acpi_set_WOL(dev);
+
+	return 0;
+}
+
+static const struct ethtool_ops vortex_ethtool_ops = {
+	.get_drvinfo		= vortex_get_drvinfo,
+	.get_strings            = vortex_get_strings,
+	.get_msglevel           = vortex_get_msglevel,
+	.set_msglevel           = vortex_set_msglevel,
+	.get_ethtool_stats      = vortex_get_ethtool_stats,
+	.get_sset_count		= vortex_get_sset_count,
+	.get_link               = ethtool_op_get_link,
+	.nway_reset             = vortex_nway_reset,
+	.get_wol                = vortex_get_wol,
+	.set_wol                = vortex_set_wol,
+	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_link_ksettings     = vortex_get_link_ksettings,
+	.set_link_ksettings     = vortex_set_link_ksettings,
+};
+
+#ifdef CONFIG_PCI
+/*
+ *	Must power the device up to do MDIO operations
+ */
+static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	int err;
+	struct vortex_private *vp = netdev_priv(dev);
+	pci_power_t state = 0;
+
+	if(VORTEX_PCI(vp))
+		state = VORTEX_PCI(vp)->current_state;
+
+	/* The kernel core really should have pci_get_power_state() */
+
+	if(state != 0)
+		pci_set_power_state(VORTEX_PCI(vp), PCI_D0);
+	err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL);
+	if(state != 0)
+		pci_set_power_state(VORTEX_PCI(vp), state);
+
+	return err;
+}
+#endif
+
+
+/* Pre-Cyclone chips have no documented multicast filter, so the only
+   multicast setting is to receive all multicast frames.  At least
+   the chip has a very clean way to set the mode, unlike many others. */
+static void set_rx_mode(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int new_mode;
+
+	if (dev->flags & IFF_PROMISC) {
+		if (vortex_debug > 3)
+			pr_notice("%s: Setting promiscuous mode.\n", dev->name);
+		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
+	} else	if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
+		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
+	} else
+		new_mode = SetRxFilter | RxStation | RxBroadcast;
+
+	iowrite16(new_mode, ioaddr + EL3_CMD);
+}
+
+#if IS_ENABLED(CONFIG_VLAN_8021Q)
+/* Setup the card so that it can receive frames with an 802.1q VLAN tag.
+   Note that this must be done after each RxReset due to some backwards
+   compatibility logic in the Cyclone and Tornado ASICs */
+
+/* The Ethernet Type used for 802.1q tagged frames */
+#define VLAN_ETHER_TYPE 0x8100
+
+static void set_8021q_mode(struct net_device *dev, int enable)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int mac_ctrl;
+
+	if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) {
+		/* cyclone and tornado chipsets can recognize 802.1q
+		 * tagged frames and treat them correctly */
+
+		int max_pkt_size = dev->mtu+14;	/* MTU+Ethernet header */
+		if (enable)
+			max_pkt_size += 4;	/* 802.1Q VLAN tag */
+
+		window_write16(vp, max_pkt_size, 3, Wn3_MaxPktSize);
+
+		/* set VlanEtherType to let the hardware checksumming
+		   treat tagged frames correctly */
+		window_write16(vp, VLAN_ETHER_TYPE, 7, Wn7_VlanEtherType);
+	} else {
+		/* on older cards we have to enable large frames */
+
+		vp->large_frames = dev->mtu > 1500 || enable;
+
+		mac_ctrl = window_read16(vp, 3, Wn3_MAC_Ctrl);
+		if (vp->large_frames)
+			mac_ctrl |= 0x40;
+		else
+			mac_ctrl &= ~0x40;
+		window_write16(vp, mac_ctrl, 3, Wn3_MAC_Ctrl);
+	}
+}
+#else
+
+static void set_8021q_mode(struct net_device *dev, int enable)
+{
+}
+
+
+#endif
+
+/* MII transceiver control section.
+   Read and write the MII registers using software-generated serial
+   MDIO protocol.  See the MII specifications or DP83840A data sheet
+   for details. */
+
+/* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues. */
+static void mdio_delay(struct vortex_private *vp)
+{
+	window_read32(vp, 4, Wn4_PhysicalMgmt);
+}
+
+#define MDIO_SHIFT_CLK	0x01
+#define MDIO_DIR_WRITE	0x04
+#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
+#define MDIO_DATA_READ	0x02
+#define MDIO_ENB_IN		0x00
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(struct vortex_private *vp, int bits)
+{
+	/* Establish sync by sending at least 32 logic ones. */
+	while (-- bits >= 0) {
+		window_write16(vp, MDIO_DATA_WRITE1, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	int i;
+	struct vortex_private *vp = netdev_priv(dev);
+	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	unsigned int retval = 0;
+
+	spin_lock_bh(&vp->mii_lock);
+
+	if (mii_preamble_required)
+		mdio_sync(vp, 32);
+
+	/* Shift the read command bits out. */
+	for (i = 14; i >= 0; i--) {
+		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		window_write16(vp, dataval, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, dataval | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		retval = (retval << 1) |
+			((window_read16(vp, 4, Wn4_PhysicalMgmt) &
+			  MDIO_DATA_READ) ? 1 : 0);
+		window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+
+	spin_unlock_bh(&vp->mii_lock);
+
+	return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
+	int i;
+
+	spin_lock_bh(&vp->mii_lock);
+
+	if (mii_preamble_required)
+		mdio_sync(vp, 32);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		window_write16(vp, dataval, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, dataval | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+	/* Leave the interface idle. */
+	for (i = 1; i >= 0; i--) {
+		window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+
+	spin_unlock_bh(&vp->mii_lock);
+}
+
+/* ACPI: Advanced Configuration and Power Interface. */
+/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */
+static void acpi_set_WOL(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+
+	device_set_wakeup_enable(vp->gendev, vp->enable_wol);
+
+	if (vp->enable_wol) {
+		/* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */
+		window_write16(vp, 2, 7, 0x0c);
+		/* The RxFilter must accept the WOL frames. */
+		iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+		iowrite16(RxEnable, ioaddr + EL3_CMD);
+
+		if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
+			pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp)));
+
+			vp->enable_wol = 0;
+			return;
+		}
+
+		if (VORTEX_PCI(vp)->current_state < PCI_D3hot)
+			return;
+
+		/* Change the power state to D3; RxEnable doesn't take effect. */
+		pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
+	}
+}
+
+
+static void vortex_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct vortex_private *vp;
+
+	if (!dev) {
+		pr_err("vortex_remove_one called for Compaq device!\n");
+		BUG();
+	}
+
+	vp = netdev_priv(dev);
+
+	if (vp->cb_fn_base)
+		pci_iounmap(pdev, vp->cb_fn_base);
+
+	unregister_netdev(dev);
+
+	pci_set_power_state(pdev, PCI_D0);	/* Go active */
+	if (vp->pm_state_valid)
+		pci_restore_state(pdev);
+	pci_disable_device(pdev);
+
+	/* Should really use issue_and_wait() here */
+	iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
+	     vp->ioaddr + EL3_CMD);
+
+	pci_iounmap(pdev, vp->ioaddr);
+
+	dma_free_coherent(&pdev->dev,
+			sizeof(struct boom_rx_desc) * RX_RING_SIZE +
+			sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+			vp->rx_ring, vp->rx_ring_dma);
+
+	pci_release_regions(pdev);
+
+	free_netdev(dev);
+}
+
+
+static struct pci_driver vortex_driver = {
+	.name		= "3c59x",
+	.probe		= vortex_init_one,
+	.remove		= vortex_remove_one,
+	.id_table	= vortex_pci_tbl,
+	.driver.pm	= VORTEX_PM_OPS,
+};
+
+
+static int vortex_have_pci;
+static int vortex_have_eisa;
+
+
+static int __init vortex_init(void)
+{
+	int pci_rc, eisa_rc;
+
+	pci_rc = pci_register_driver(&vortex_driver);
+	eisa_rc = vortex_eisa_init();
+
+	if (pci_rc == 0)
+		vortex_have_pci = 1;
+	if (eisa_rc > 0)
+		vortex_have_eisa = 1;
+
+	return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV;
+}
+
+
+static void __exit vortex_eisa_cleanup(void)
+{
+	void __iomem *ioaddr;
+
+#ifdef CONFIG_EISA
+	/* Take care of the EISA devices */
+	eisa_driver_unregister(&vortex_eisa_driver);
+#endif
+
+	if (compaq_net_device) {
+		ioaddr = ioport_map(compaq_net_device->base_addr,
+		                    VORTEX_TOTAL_SIZE);
+
+		unregister_netdev(compaq_net_device);
+		iowrite16(TotalReset, ioaddr + EL3_CMD);
+		release_region(compaq_net_device->base_addr,
+		               VORTEX_TOTAL_SIZE);
+
+		free_netdev(compaq_net_device);
+	}
+}
+
+
+static void __exit vortex_cleanup(void)
+{
+	if (vortex_have_pci)
+		pci_unregister_driver(&vortex_driver);
+	if (vortex_have_eisa)
+		vortex_eisa_cleanup();
+}
+
+
+module_init(vortex_init);
+module_exit(vortex_cleanup);