Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1031 insertions, 0 deletions

diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c
new file mode 100644
index 000000000..fd1b008b7
--- /dev/null
+++ b/drivers/net/ethernet/apple/mace.c
@@ -0,0 +1,1031 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Network device driver for the MACE ethernet controller on
+ * Apple Powermacs.  Assumes it's under a DBDMA controller.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/crc32.h>
+#include <linux/spinlock.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+#include <linux/pgtable.h>
+#include <asm/dbdma.h>
+#include <asm/io.h>
+#include <asm/macio.h>
+
+#include "mace.h"
+
+static int port_aaui = -1;
+
+#define N_RX_RING	8
+#define N_TX_RING	6
+#define MAX_TX_ACTIVE	1
+#define NCMDS_TX	1	/* dma commands per element in tx ring */
+#define RX_BUFLEN	(ETH_FRAME_LEN + 8)
+#define TX_TIMEOUT	HZ	/* 1 second */
+
+/* Chip rev needs workaround on HW & multicast addr change */
+#define BROKEN_ADDRCHG_REV	0x0941
+
+/* Bits in transmit DMA status */
+#define TX_DMA_ERR	0x80
+
+struct mace_data {
+    volatile struct mace __iomem *mace;
+    volatile struct dbdma_regs __iomem *tx_dma;
+    int tx_dma_intr;
+    volatile struct dbdma_regs __iomem *rx_dma;
+    int rx_dma_intr;
+    volatile struct dbdma_cmd *tx_cmds;	/* xmit dma command list */
+    volatile struct dbdma_cmd *rx_cmds;	/* recv dma command list */
+    struct sk_buff *rx_bufs[N_RX_RING];
+    int rx_fill;
+    int rx_empty;
+    struct sk_buff *tx_bufs[N_TX_RING];
+    int tx_fill;
+    int tx_empty;
+    unsigned char maccc;
+    unsigned char tx_fullup;
+    unsigned char tx_active;
+    unsigned char tx_bad_runt;
+    struct timer_list tx_timeout;
+    int timeout_active;
+    int port_aaui;
+    int chipid;
+    struct macio_dev *mdev;
+    spinlock_t lock;
+};
+
+/*
+ * Number of bytes of private data per MACE: allow enough for
+ * the rx and tx dma commands plus a branch dma command each,
+ * and another 16 bytes to allow us to align the dma command
+ * buffers on a 16 byte boundary.
+ */
+#define PRIV_BYTES	(sizeof(struct mace_data) \
+	+ (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
+
+static int mace_open(struct net_device *dev);
+static int mace_close(struct net_device *dev);
+static netdev_tx_t mace_xmit_start(struct sk_buff *skb, struct net_device *dev);
+static void mace_set_multicast(struct net_device *dev);
+static void mace_reset(struct net_device *dev);
+static int mace_set_address(struct net_device *dev, void *addr);
+static irqreturn_t mace_interrupt(int irq, void *dev_id);
+static irqreturn_t mace_txdma_intr(int irq, void *dev_id);
+static irqreturn_t mace_rxdma_intr(int irq, void *dev_id);
+static void mace_set_timeout(struct net_device *dev);
+static void mace_tx_timeout(struct timer_list *t);
+static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma);
+static inline void mace_clean_rings(struct mace_data *mp);
+static void __mace_set_address(struct net_device *dev, const void *addr);
+
+/*
+ * If we can't get a skbuff when we need it, we use this area for DMA.
+ */
+static unsigned char *dummy_buf;
+
+static const struct net_device_ops mace_netdev_ops = {
+	.ndo_open		= mace_open,
+	.ndo_stop		= mace_close,
+	.ndo_start_xmit		= mace_xmit_start,
+	.ndo_set_rx_mode	= mace_set_multicast,
+	.ndo_set_mac_address	= mace_set_address,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
+{
+	struct device_node *mace = macio_get_of_node(mdev);
+	struct net_device *dev;
+	struct mace_data *mp;
+	const unsigned char *addr;
+	u8 macaddr[ETH_ALEN];
+	int j, rev, rc = -EBUSY;
+
+	if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) {
+		printk(KERN_ERR "can't use MACE %pOF: need 3 addrs and 3 irqs\n",
+		       mace);
+		return -ENODEV;
+	}
+
+	addr = of_get_property(mace, "mac-address", NULL);
+	if (addr == NULL) {
+		addr = of_get_property(mace, "local-mac-address", NULL);
+		if (addr == NULL) {
+			printk(KERN_ERR "Can't get mac-address for MACE %pOF\n",
+			       mace);
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * lazy allocate the driver-wide dummy buffer. (Note that we
+	 * never have more than one MACE in the system anyway)
+	 */
+	if (dummy_buf == NULL) {
+		dummy_buf = kmalloc(RX_BUFLEN+2, GFP_KERNEL);
+		if (dummy_buf == NULL)
+			return -ENOMEM;
+	}
+
+	if (macio_request_resources(mdev, "mace")) {
+		printk(KERN_ERR "MACE: can't request IO resources !\n");
+		return -EBUSY;
+	}
+
+	dev = alloc_etherdev(PRIV_BYTES);
+	if (!dev) {
+		rc = -ENOMEM;
+		goto err_release;
+	}
+	SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
+
+	mp = netdev_priv(dev);
+	mp->mdev = mdev;
+	macio_set_drvdata(mdev, dev);
+
+	dev->base_addr = macio_resource_start(mdev, 0);
+	mp->mace = ioremap(dev->base_addr, 0x1000);
+	if (mp->mace == NULL) {
+		printk(KERN_ERR "MACE: can't map IO resources !\n");
+		rc = -ENOMEM;
+		goto err_free;
+	}
+	dev->irq = macio_irq(mdev, 0);
+
+	rev = addr[0] == 0 && addr[1] == 0xA0;
+	for (j = 0; j < 6; ++j) {
+		macaddr[j] = rev ? bitrev8(addr[j]): addr[j];
+	}
+	eth_hw_addr_set(dev, macaddr);
+	mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) |
+			in_8(&mp->mace->chipid_lo);
+
+
+	mp = netdev_priv(dev);
+	mp->maccc = ENXMT | ENRCV;
+
+	mp->tx_dma = ioremap(macio_resource_start(mdev, 1), 0x1000);
+	if (mp->tx_dma == NULL) {
+		printk(KERN_ERR "MACE: can't map TX DMA resources !\n");
+		rc = -ENOMEM;
+		goto err_unmap_io;
+	}
+	mp->tx_dma_intr = macio_irq(mdev, 1);
+
+	mp->rx_dma = ioremap(macio_resource_start(mdev, 2), 0x1000);
+	if (mp->rx_dma == NULL) {
+		printk(KERN_ERR "MACE: can't map RX DMA resources !\n");
+		rc = -ENOMEM;
+		goto err_unmap_tx_dma;
+	}
+	mp->rx_dma_intr = macio_irq(mdev, 2);
+
+	mp->tx_cmds = (volatile struct dbdma_cmd *) DBDMA_ALIGN(mp + 1);
+	mp->rx_cmds = mp->tx_cmds + NCMDS_TX * N_TX_RING + 1;
+
+	memset((char *) mp->tx_cmds, 0,
+	       (NCMDS_TX*N_TX_RING + N_RX_RING + 2) * sizeof(struct dbdma_cmd));
+	timer_setup(&mp->tx_timeout, mace_tx_timeout, 0);
+	spin_lock_init(&mp->lock);
+	mp->timeout_active = 0;
+
+	if (port_aaui >= 0)
+		mp->port_aaui = port_aaui;
+	else {
+		/* Apple Network Server uses the AAUI port */
+		if (of_machine_is_compatible("AAPL,ShinerESB"))
+			mp->port_aaui = 1;
+		else {
+#ifdef CONFIG_MACE_AAUI_PORT
+			mp->port_aaui = 1;
+#else
+			mp->port_aaui = 0;
+#endif
+		}
+	}
+
+	dev->netdev_ops = &mace_netdev_ops;
+
+	/*
+	 * Most of what is below could be moved to mace_open()
+	 */
+	mace_reset(dev);
+
+	rc = request_irq(dev->irq, mace_interrupt, 0, "MACE", dev);
+	if (rc) {
+		printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq);
+		goto err_unmap_rx_dma;
+	}
+	rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev);
+	if (rc) {
+		printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr);
+		goto err_free_irq;
+	}
+	rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev);
+	if (rc) {
+		printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr);
+		goto err_free_tx_irq;
+	}
+
+	rc = register_netdev(dev);
+	if (rc) {
+		printk(KERN_ERR "MACE: Cannot register net device, aborting.\n");
+		goto err_free_rx_irq;
+	}
+
+	printk(KERN_INFO "%s: MACE at %pM, chip revision %d.%d\n",
+	       dev->name, dev->dev_addr,
+	       mp->chipid >> 8, mp->chipid & 0xff);
+
+	return 0;
+
+ err_free_rx_irq:
+	free_irq(macio_irq(mdev, 2), dev);
+ err_free_tx_irq:
+	free_irq(macio_irq(mdev, 1), dev);
+ err_free_irq:
+	free_irq(macio_irq(mdev, 0), dev);
+ err_unmap_rx_dma:
+	iounmap(mp->rx_dma);
+ err_unmap_tx_dma:
+	iounmap(mp->tx_dma);
+ err_unmap_io:
+	iounmap(mp->mace);
+ err_free:
+	free_netdev(dev);
+ err_release:
+	macio_release_resources(mdev);
+
+	return rc;
+}
+
+static int mace_remove(struct macio_dev *mdev)
+{
+	struct net_device *dev = macio_get_drvdata(mdev);
+	struct mace_data *mp;
+
+	BUG_ON(dev == NULL);
+
+	macio_set_drvdata(mdev, NULL);
+
+	mp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+
+	free_irq(dev->irq, dev);
+	free_irq(mp->tx_dma_intr, dev);
+	free_irq(mp->rx_dma_intr, dev);
+
+	iounmap(mp->rx_dma);
+	iounmap(mp->tx_dma);
+	iounmap(mp->mace);
+
+	free_netdev(dev);
+
+	macio_release_resources(mdev);
+
+	return 0;
+}
+
+static void dbdma_reset(volatile struct dbdma_regs __iomem *dma)
+{
+    int i;
+
+    out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16);
+
+    /*
+     * Yes this looks peculiar, but apparently it needs to be this
+     * way on some machines.
+     */
+    for (i = 200; i > 0; --i)
+	if (le32_to_cpu(dma->control) & RUN)
+	    udelay(1);
+}
+
+static void mace_reset(struct net_device *dev)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    int i;
+
+    /* soft-reset the chip */
+    i = 200;
+    while (--i) {
+	out_8(&mb->biucc, SWRST);
+	if (in_8(&mb->biucc) & SWRST) {
+	    udelay(10);
+	    continue;
+	}
+	break;
+    }
+    if (!i) {
+	printk(KERN_ERR "mace: cannot reset chip!\n");
+	return;
+    }
+
+    out_8(&mb->imr, 0xff);	/* disable all intrs for now */
+    i = in_8(&mb->ir);
+    out_8(&mb->maccc, 0);	/* turn off tx, rx */
+
+    out_8(&mb->biucc, XMTSP_64);
+    out_8(&mb->utr, RTRD);
+    out_8(&mb->fifocc, RCVFW_32 | XMTFW_16 | XMTFWU | RCVFWU | XMTBRST);
+    out_8(&mb->xmtfc, AUTO_PAD_XMIT); /* auto-pad short frames */
+    out_8(&mb->rcvfc, 0);
+
+    /* load up the hardware address */
+    __mace_set_address(dev, dev->dev_addr);
+
+    /* clear the multicast filter */
+    if (mp->chipid == BROKEN_ADDRCHG_REV)
+	out_8(&mb->iac, LOGADDR);
+    else {
+	out_8(&mb->iac, ADDRCHG | LOGADDR);
+	while ((in_8(&mb->iac) & ADDRCHG) != 0)
+		;
+    }
+    for (i = 0; i < 8; ++i)
+	out_8(&mb->ladrf, 0);
+
+    /* done changing address */
+    if (mp->chipid != BROKEN_ADDRCHG_REV)
+	out_8(&mb->iac, 0);
+
+    if (mp->port_aaui)
+	out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO);
+    else
+	out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
+}
+
+static void __mace_set_address(struct net_device *dev, const void *addr)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    const unsigned char *p = addr;
+    u8 macaddr[ETH_ALEN];
+    int i;
+
+    /* load up the hardware address */
+    if (mp->chipid == BROKEN_ADDRCHG_REV)
+	out_8(&mb->iac, PHYADDR);
+    else {
+	out_8(&mb->iac, ADDRCHG | PHYADDR);
+	while ((in_8(&mb->iac) & ADDRCHG) != 0)
+	    ;
+    }
+    for (i = 0; i < 6; ++i)
+        out_8(&mb->padr, macaddr[i] = p[i]);
+
+    eth_hw_addr_set(dev, macaddr);
+
+    if (mp->chipid != BROKEN_ADDRCHG_REV)
+        out_8(&mb->iac, 0);
+}
+
+static int mace_set_address(struct net_device *dev, void *addr)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    unsigned long flags;
+
+    spin_lock_irqsave(&mp->lock, flags);
+
+    __mace_set_address(dev, addr);
+
+    /* note: setting ADDRCHG clears ENRCV */
+    out_8(&mb->maccc, mp->maccc);
+
+    spin_unlock_irqrestore(&mp->lock, flags);
+    return 0;
+}
+
+static inline void mace_clean_rings(struct mace_data *mp)
+{
+    int i;
+
+    /* free some skb's */
+    for (i = 0; i < N_RX_RING; ++i) {
+	if (mp->rx_bufs[i] != NULL) {
+	    dev_kfree_skb(mp->rx_bufs[i]);
+	    mp->rx_bufs[i] = NULL;
+	}
+    }
+    for (i = mp->tx_empty; i != mp->tx_fill; ) {
+	dev_kfree_skb(mp->tx_bufs[i]);
+	if (++i >= N_TX_RING)
+	    i = 0;
+    }
+}
+
+static int mace_open(struct net_device *dev)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+    volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+    volatile struct dbdma_cmd *cp;
+    int i;
+    struct sk_buff *skb;
+    unsigned char *data;
+
+    /* reset the chip */
+    mace_reset(dev);
+
+    /* initialize list of sk_buffs for receiving and set up recv dma */
+    mace_clean_rings(mp);
+    memset((char *)mp->rx_cmds, 0, N_RX_RING * sizeof(struct dbdma_cmd));
+    cp = mp->rx_cmds;
+    for (i = 0; i < N_RX_RING - 1; ++i) {
+	skb = netdev_alloc_skb(dev, RX_BUFLEN + 2);
+	if (!skb) {
+	    data = dummy_buf;
+	} else {
+	    skb_reserve(skb, 2);	/* so IP header lands on 4-byte bdry */
+	    data = skb->data;
+	}
+	mp->rx_bufs[i] = skb;
+	cp->req_count = cpu_to_le16(RX_BUFLEN);
+	cp->command = cpu_to_le16(INPUT_LAST + INTR_ALWAYS);
+	cp->phy_addr = cpu_to_le32(virt_to_bus(data));
+	cp->xfer_status = 0;
+	++cp;
+    }
+    mp->rx_bufs[i] = NULL;
+    cp->command = cpu_to_le16(DBDMA_STOP);
+    mp->rx_fill = i;
+    mp->rx_empty = 0;
+
+    /* Put a branch back to the beginning of the receive command list */
+    ++cp;
+    cp->command = cpu_to_le16(DBDMA_NOP + BR_ALWAYS);
+    cp->cmd_dep = cpu_to_le32(virt_to_bus(mp->rx_cmds));
+
+    /* start rx dma */
+    out_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
+    out_le32(&rd->cmdptr, virt_to_bus(mp->rx_cmds));
+    out_le32(&rd->control, (RUN << 16) | RUN);
+
+    /* put a branch at the end of the tx command list */
+    cp = mp->tx_cmds + NCMDS_TX * N_TX_RING;
+    cp->command = cpu_to_le16(DBDMA_NOP + BR_ALWAYS);
+    cp->cmd_dep = cpu_to_le32(virt_to_bus(mp->tx_cmds));
+
+    /* reset tx dma */
+    out_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
+    out_le32(&td->cmdptr, virt_to_bus(mp->tx_cmds));
+    mp->tx_fill = 0;
+    mp->tx_empty = 0;
+    mp->tx_fullup = 0;
+    mp->tx_active = 0;
+    mp->tx_bad_runt = 0;
+
+    /* turn it on! */
+    out_8(&mb->maccc, mp->maccc);
+    /* enable all interrupts except receive interrupts */
+    out_8(&mb->imr, RCVINT);
+
+    return 0;
+}
+
+static int mace_close(struct net_device *dev)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+    volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+
+    /* disable rx and tx */
+    out_8(&mb->maccc, 0);
+    out_8(&mb->imr, 0xff);		/* disable all intrs */
+
+    /* disable rx and tx dma */
+    rd->control = cpu_to_le32((RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
+    td->control = cpu_to_le32((RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
+
+    mace_clean_rings(mp);
+
+    return 0;
+}
+
+static inline void mace_set_timeout(struct net_device *dev)
+{
+    struct mace_data *mp = netdev_priv(dev);
+
+    if (mp->timeout_active)
+	del_timer(&mp->tx_timeout);
+    mp->tx_timeout.expires = jiffies + TX_TIMEOUT;
+    add_timer(&mp->tx_timeout);
+    mp->timeout_active = 1;
+}
+
+static netdev_tx_t mace_xmit_start(struct sk_buff *skb, struct net_device *dev)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+    volatile struct dbdma_cmd *cp, *np;
+    unsigned long flags;
+    int fill, next, len;
+
+    /* see if there's a free slot in the tx ring */
+    spin_lock_irqsave(&mp->lock, flags);
+    fill = mp->tx_fill;
+    next = fill + 1;
+    if (next >= N_TX_RING)
+	next = 0;
+    if (next == mp->tx_empty) {
+	netif_stop_queue(dev);
+	mp->tx_fullup = 1;
+	spin_unlock_irqrestore(&mp->lock, flags);
+	return NETDEV_TX_BUSY;		/* can't take it at the moment */
+    }
+    spin_unlock_irqrestore(&mp->lock, flags);
+
+    /* partially fill in the dma command block */
+    len = skb->len;
+    if (len > ETH_FRAME_LEN) {
+	printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len);
+	len = ETH_FRAME_LEN;
+    }
+    mp->tx_bufs[fill] = skb;
+    cp = mp->tx_cmds + NCMDS_TX * fill;
+    cp->req_count = cpu_to_le16(len);
+    cp->phy_addr = cpu_to_le32(virt_to_bus(skb->data));
+
+    np = mp->tx_cmds + NCMDS_TX * next;
+    out_le16(&np->command, DBDMA_STOP);
+
+    /* poke the tx dma channel */
+    spin_lock_irqsave(&mp->lock, flags);
+    mp->tx_fill = next;
+    if (!mp->tx_bad_runt && mp->tx_active < MAX_TX_ACTIVE) {
+	out_le16(&cp->xfer_status, 0);
+	out_le16(&cp->command, OUTPUT_LAST);
+	out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
+	++mp->tx_active;
+	mace_set_timeout(dev);
+    }
+    if (++next >= N_TX_RING)
+	next = 0;
+    if (next == mp->tx_empty)
+	netif_stop_queue(dev);
+    spin_unlock_irqrestore(&mp->lock, flags);
+
+    return NETDEV_TX_OK;
+}
+
+static void mace_set_multicast(struct net_device *dev)
+{
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    int i;
+    u32 crc;
+    unsigned long flags;
+
+    spin_lock_irqsave(&mp->lock, flags);
+    mp->maccc &= ~PROM;
+    if (dev->flags & IFF_PROMISC) {
+	mp->maccc |= PROM;
+    } else {
+	unsigned char multicast_filter[8];
+	struct netdev_hw_addr *ha;
+
+	if (dev->flags & IFF_ALLMULTI) {
+	    for (i = 0; i < 8; i++)
+		multicast_filter[i] = 0xff;
+	} else {
+	    for (i = 0; i < 8; i++)
+		multicast_filter[i] = 0;
+	    netdev_for_each_mc_addr(ha, dev) {
+	        crc = ether_crc_le(6, ha->addr);
+		i = crc >> 26;	/* bit number in multicast_filter */
+		multicast_filter[i >> 3] |= 1 << (i & 7);
+	    }
+	}
+#if 0
+	printk("Multicast filter :");
+	for (i = 0; i < 8; i++)
+	    printk("%02x ", multicast_filter[i]);
+	printk("\n");
+#endif
+
+	if (mp->chipid == BROKEN_ADDRCHG_REV)
+	    out_8(&mb->iac, LOGADDR);
+	else {
+	    out_8(&mb->iac, ADDRCHG | LOGADDR);
+	    while ((in_8(&mb->iac) & ADDRCHG) != 0)
+		;
+	}
+	for (i = 0; i < 8; ++i)
+	    out_8(&mb->ladrf, multicast_filter[i]);
+	if (mp->chipid != BROKEN_ADDRCHG_REV)
+	    out_8(&mb->iac, 0);
+    }
+    /* reset maccc */
+    out_8(&mb->maccc, mp->maccc);
+    spin_unlock_irqrestore(&mp->lock, flags);
+}
+
+static void mace_handle_misc_intrs(struct mace_data *mp, int intr, struct net_device *dev)
+{
+    volatile struct mace __iomem *mb = mp->mace;
+    static int mace_babbles, mace_jabbers;
+
+    if (intr & MPCO)
+	dev->stats.rx_missed_errors += 256;
+    dev->stats.rx_missed_errors += in_8(&mb->mpc);   /* reading clears it */
+    if (intr & RNTPCO)
+	dev->stats.rx_length_errors += 256;
+    dev->stats.rx_length_errors += in_8(&mb->rntpc); /* reading clears it */
+    if (intr & CERR)
+	++dev->stats.tx_heartbeat_errors;
+    if (intr & BABBLE)
+	if (mace_babbles++ < 4)
+	    printk(KERN_DEBUG "mace: babbling transmitter\n");
+    if (intr & JABBER)
+	if (mace_jabbers++ < 4)
+	    printk(KERN_DEBUG "mace: jabbering transceiver\n");
+}
+
+static irqreturn_t mace_interrupt(int irq, void *dev_id)
+{
+    struct net_device *dev = (struct net_device *) dev_id;
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct mace __iomem *mb = mp->mace;
+    volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+    volatile struct dbdma_cmd *cp;
+    int intr, fs, i, stat, x;
+    int xcount, dstat;
+    unsigned long flags;
+    /* static int mace_last_fs, mace_last_xcount; */
+
+    spin_lock_irqsave(&mp->lock, flags);
+    intr = in_8(&mb->ir);		/* read interrupt register */
+    in_8(&mb->xmtrc);			/* get retries */
+    mace_handle_misc_intrs(mp, intr, dev);
+
+    i = mp->tx_empty;
+    while (in_8(&mb->pr) & XMTSV) {
+	del_timer(&mp->tx_timeout);
+	mp->timeout_active = 0;
+	/*
+	 * Clear any interrupt indication associated with this status
+	 * word.  This appears to unlatch any error indication from
+	 * the DMA controller.
+	 */
+	intr = in_8(&mb->ir);
+	if (intr != 0)
+	    mace_handle_misc_intrs(mp, intr, dev);
+	if (mp->tx_bad_runt) {
+	    fs = in_8(&mb->xmtfs);
+	    mp->tx_bad_runt = 0;
+	    out_8(&mb->xmtfc, AUTO_PAD_XMIT);
+	    continue;
+	}
+	dstat = le32_to_cpu(td->status);
+	/* stop DMA controller */
+	out_le32(&td->control, RUN << 16);
+	/*
+	 * xcount is the number of complete frames which have been
+	 * written to the fifo but for which status has not been read.
+	 */
+	xcount = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK;
+	if (xcount == 0 || (dstat & DEAD)) {
+	    /*
+	     * If a packet was aborted before the DMA controller has
+	     * finished transferring it, it seems that there are 2 bytes
+	     * which are stuck in some buffer somewhere.  These will get
+	     * transmitted as soon as we read the frame status (which
+	     * reenables the transmit data transfer request).  Turning
+	     * off the DMA controller and/or resetting the MACE doesn't
+	     * help.  So we disable auto-padding and FCS transmission
+	     * so the two bytes will only be a runt packet which should
+	     * be ignored by other stations.
+	     */
+	    out_8(&mb->xmtfc, DXMTFCS);
+	}
+	fs = in_8(&mb->xmtfs);
+	if ((fs & XMTSV) == 0) {
+	    printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n",
+		   fs, xcount, dstat);
+	    mace_reset(dev);
+		/*
+		 * XXX mace likes to hang the machine after a xmtfs error.
+		 * This is hard to reproduce, resetting *may* help
+		 */
+	}
+	cp = mp->tx_cmds + NCMDS_TX * i;
+	stat = le16_to_cpu(cp->xfer_status);
+	if ((fs & (UFLO|LCOL|LCAR|RTRY)) || (dstat & DEAD) || xcount == 0) {
+	    /*
+	     * Check whether there were in fact 2 bytes written to
+	     * the transmit FIFO.
+	     */
+	    udelay(1);
+	    x = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK;
+	    if (x != 0) {
+		/* there were two bytes with an end-of-packet indication */
+		mp->tx_bad_runt = 1;
+		mace_set_timeout(dev);
+	    } else {
+		/*
+		 * Either there weren't the two bytes buffered up, or they
+		 * didn't have an end-of-packet indication.
+		 * We flush the transmit FIFO just in case (by setting the
+		 * XMTFWU bit with the transmitter disabled).
+		 */
+		out_8(&mb->maccc, in_8(&mb->maccc) & ~ENXMT);
+		out_8(&mb->fifocc, in_8(&mb->fifocc) | XMTFWU);
+		udelay(1);
+		out_8(&mb->maccc, in_8(&mb->maccc) | ENXMT);
+		out_8(&mb->xmtfc, AUTO_PAD_XMIT);
+	    }
+	}
+	/* dma should have finished */
+	if (i == mp->tx_fill) {
+	    printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n",
+		   fs, xcount, dstat);
+	    continue;
+	}
+	/* Update stats */
+	if (fs & (UFLO|LCOL|LCAR|RTRY)) {
+	    ++dev->stats.tx_errors;
+	    if (fs & LCAR)
+		++dev->stats.tx_carrier_errors;
+	    if (fs & (UFLO|LCOL|RTRY))
+		++dev->stats.tx_aborted_errors;
+	} else {
+	    dev->stats.tx_bytes += mp->tx_bufs[i]->len;
+	    ++dev->stats.tx_packets;
+	}
+	dev_consume_skb_irq(mp->tx_bufs[i]);
+	--mp->tx_active;
+	if (++i >= N_TX_RING)
+	    i = 0;
+#if 0
+	mace_last_fs = fs;
+	mace_last_xcount = xcount;
+#endif
+    }
+
+    if (i != mp->tx_empty) {
+	mp->tx_fullup = 0;
+	netif_wake_queue(dev);
+    }
+    mp->tx_empty = i;
+    i += mp->tx_active;
+    if (i >= N_TX_RING)
+	i -= N_TX_RING;
+    if (!mp->tx_bad_runt && i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE) {
+	do {
+	    /* set up the next one */
+	    cp = mp->tx_cmds + NCMDS_TX * i;
+	    out_le16(&cp->xfer_status, 0);
+	    out_le16(&cp->command, OUTPUT_LAST);
+	    ++mp->tx_active;
+	    if (++i >= N_TX_RING)
+		i = 0;
+	} while (i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE);
+	out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
+	mace_set_timeout(dev);
+    }
+    spin_unlock_irqrestore(&mp->lock, flags);
+    return IRQ_HANDLED;
+}
+
+static void mace_tx_timeout(struct timer_list *t)
+{
+    struct mace_data *mp = from_timer(mp, t, tx_timeout);
+    struct net_device *dev = macio_get_drvdata(mp->mdev);
+    volatile struct mace __iomem *mb = mp->mace;
+    volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+    volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+    volatile struct dbdma_cmd *cp;
+    unsigned long flags;
+    int i;
+
+    spin_lock_irqsave(&mp->lock, flags);
+    mp->timeout_active = 0;
+    if (mp->tx_active == 0 && !mp->tx_bad_runt)
+	goto out;
+
+    /* update various counters */
+    mace_handle_misc_intrs(mp, in_8(&mb->ir), dev);
+
+    cp = mp->tx_cmds + NCMDS_TX * mp->tx_empty;
+
+    /* turn off both tx and rx and reset the chip */
+    out_8(&mb->maccc, 0);
+    printk(KERN_ERR "mace: transmit timeout - resetting\n");
+    dbdma_reset(td);
+    mace_reset(dev);
+
+    /* restart rx dma */
+    cp = bus_to_virt(le32_to_cpu(rd->cmdptr));
+    dbdma_reset(rd);
+    out_le16(&cp->xfer_status, 0);
+    out_le32(&rd->cmdptr, virt_to_bus(cp));
+    out_le32(&rd->control, (RUN << 16) | RUN);
+
+    /* fix up the transmit side */
+    i = mp->tx_empty;
+    mp->tx_active = 0;
+    ++dev->stats.tx_errors;
+    if (mp->tx_bad_runt) {
+	mp->tx_bad_runt = 0;
+    } else if (i != mp->tx_fill) {
+	dev_kfree_skb_irq(mp->tx_bufs[i]);
+	if (++i >= N_TX_RING)
+	    i = 0;
+	mp->tx_empty = i;
+    }
+    mp->tx_fullup = 0;
+    netif_wake_queue(dev);
+    if (i != mp->tx_fill) {
+	cp = mp->tx_cmds + NCMDS_TX * i;
+	out_le16(&cp->xfer_status, 0);
+	out_le16(&cp->command, OUTPUT_LAST);
+	out_le32(&td->cmdptr, virt_to_bus(cp));
+	out_le32(&td->control, (RUN << 16) | RUN);
+	++mp->tx_active;
+	mace_set_timeout(dev);
+    }
+
+    /* turn it back on */
+    out_8(&mb->imr, RCVINT);
+    out_8(&mb->maccc, mp->maccc);
+
+out:
+    spin_unlock_irqrestore(&mp->lock, flags);
+}
+
+static irqreturn_t mace_txdma_intr(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mace_rxdma_intr(int irq, void *dev_id)
+{
+    struct net_device *dev = (struct net_device *) dev_id;
+    struct mace_data *mp = netdev_priv(dev);
+    volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+    volatile struct dbdma_cmd *cp, *np;
+    int i, nb, stat, next;
+    struct sk_buff *skb;
+    unsigned frame_status;
+    static int mace_lost_status;
+    unsigned char *data;
+    unsigned long flags;
+
+    spin_lock_irqsave(&mp->lock, flags);
+    for (i = mp->rx_empty; i != mp->rx_fill; ) {
+	cp = mp->rx_cmds + i;
+	stat = le16_to_cpu(cp->xfer_status);
+	if ((stat & ACTIVE) == 0) {
+	    next = i + 1;
+	    if (next >= N_RX_RING)
+		next = 0;
+	    np = mp->rx_cmds + next;
+	    if (next != mp->rx_fill &&
+		(le16_to_cpu(np->xfer_status) & ACTIVE) != 0) {
+		printk(KERN_DEBUG "mace: lost a status word\n");
+		++mace_lost_status;
+	    } else
+		break;
+	}
+	nb = le16_to_cpu(cp->req_count) - le16_to_cpu(cp->res_count);
+	out_le16(&cp->command, DBDMA_STOP);
+	/* got a packet, have a look at it */
+	skb = mp->rx_bufs[i];
+	if (!skb) {
+	    ++dev->stats.rx_dropped;
+	} else if (nb > 8) {
+	    data = skb->data;
+	    frame_status = (data[nb-3] << 8) + data[nb-4];
+	    if (frame_status & (RS_OFLO|RS_CLSN|RS_FRAMERR|RS_FCSERR)) {
+		++dev->stats.rx_errors;
+		if (frame_status & RS_OFLO)
+		    ++dev->stats.rx_over_errors;
+		if (frame_status & RS_FRAMERR)
+		    ++dev->stats.rx_frame_errors;
+		if (frame_status & RS_FCSERR)
+		    ++dev->stats.rx_crc_errors;
+	    } else {
+		/* Mace feature AUTO_STRIP_RCV is on by default, dropping the
+		 * FCS on frames with 802.3 headers. This means that Ethernet
+		 * frames have 8 extra octets at the end, while 802.3 frames
+		 * have only 4. We need to correctly account for this. */
+		if (*(unsigned short *)(data+12) < 1536) /* 802.3 header */
+		    nb -= 4;
+		else	/* Ethernet header; mace includes FCS */
+		    nb -= 8;
+		skb_put(skb, nb);
+		skb->protocol = eth_type_trans(skb, dev);
+		dev->stats.rx_bytes += skb->len;
+		netif_rx(skb);
+		mp->rx_bufs[i] = NULL;
+		++dev->stats.rx_packets;
+	    }
+	} else {
+	    ++dev->stats.rx_errors;
+	    ++dev->stats.rx_length_errors;
+	}
+
+	/* advance to next */
+	if (++i >= N_RX_RING)
+	    i = 0;
+    }
+    mp->rx_empty = i;
+
+    i = mp->rx_fill;
+    for (;;) {
+	next = i + 1;
+	if (next >= N_RX_RING)
+	    next = 0;
+	if (next == mp->rx_empty)
+	    break;
+	cp = mp->rx_cmds + i;
+	skb = mp->rx_bufs[i];
+	if (!skb) {
+	    skb = netdev_alloc_skb(dev, RX_BUFLEN + 2);
+	    if (skb) {
+		skb_reserve(skb, 2);
+		mp->rx_bufs[i] = skb;
+	    }
+	}
+	cp->req_count = cpu_to_le16(RX_BUFLEN);
+	data = skb? skb->data: dummy_buf;
+	cp->phy_addr = cpu_to_le32(virt_to_bus(data));
+	out_le16(&cp->xfer_status, 0);
+	out_le16(&cp->command, INPUT_LAST + INTR_ALWAYS);
+#if 0
+	if ((le32_to_cpu(rd->status) & ACTIVE) != 0) {
+	    out_le32(&rd->control, (PAUSE << 16) | PAUSE);
+	    while ((in_le32(&rd->status) & ACTIVE) != 0)
+		;
+	}
+#endif
+	i = next;
+    }
+    if (i != mp->rx_fill) {
+	out_le32(&rd->control, ((RUN|WAKE) << 16) | (RUN|WAKE));
+	mp->rx_fill = i;
+    }
+    spin_unlock_irqrestore(&mp->lock, flags);
+    return IRQ_HANDLED;
+}
+
+static const struct of_device_id mace_match[] =
+{
+	{
+	.name 		= "mace",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE (of, mace_match);
+
+static struct macio_driver mace_driver =
+{
+	.driver = {
+		.name 		= "mace",
+		.owner		= THIS_MODULE,
+		.of_match_table	= mace_match,
+	},
+	.probe		= mace_probe,
+	.remove		= mace_remove,
+};
+
+
+static int __init mace_init(void)
+{
+	return macio_register_driver(&mace_driver);
+}
+
+static void __exit mace_cleanup(void)
+{
+	macio_unregister_driver(&mace_driver);
+
+	kfree(dummy_buf);
+	dummy_buf = NULL;
+}
+
+MODULE_AUTHOR("Paul Mackerras");
+MODULE_DESCRIPTION("PowerMac MACE driver.");
+module_param(port_aaui, int, 0);
+MODULE_PARM_DESC(port_aaui, "MACE uses AAUI port (0-1)");
+MODULE_LICENSE("GPL");
+
+module_init(mace_init);
+module_exit(mace_cleanup);