summaryrefslogtreecommitdiffstats
path: root/drivers/net/hamradio/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/net/hamradio/Kconfig
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/hamradio/Kconfig')
-rw-r--r--drivers/net/hamradio/Kconfig163
1 files changed, 163 insertions, 0 deletions
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
new file mode 100644
index 000000000..a9c44f081
--- /dev/null
+++ b/drivers/net/hamradio/Kconfig
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MKISS
+ tristate "Serial port KISS driver"
+ depends on AX25 && TTY
+ select CRC16
+ help
+ KISS is a protocol used for the exchange of data between a computer
+ and a Terminal Node Controller (a small embedded system commonly
+ used for networking over AX.25 amateur radio connections; it
+ connects the computer's serial port with the radio's microphone
+ input and speaker output).
+
+ Although KISS is less advanced than the 6pack protocol, it has
+ the advantage that it is already supported by most modern TNCs
+ without the need for a firmware upgrade.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mkiss.
+
+config 6PACK
+ tristate "Serial port 6PACK driver"
+ depends on AX25 && TTY
+ help
+ 6pack is a transmission protocol for the data exchange between your
+ PC and your TNC (the Terminal Node Controller acts as a kind of
+ modem connecting your computer's serial port to your radio's
+ microphone input and speaker output). This protocol can be used as
+ an alternative to KISS for networking over AX.25 amateur radio
+ connections, but it has some extended functionality.
+
+ Note that this driver is still experimental and might cause
+ problems. For details about the features and the usage of the
+ driver, read <file:Documentation/networking/6pack.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 6pack.
+
+config BPQETHER
+ tristate "BPQ Ethernet driver"
+ depends on AX25
+ help
+ AX.25 is the protocol used for computer communication over amateur
+ radio. If you say Y here, you will be able to send and receive AX.25
+ traffic over Ethernet (also called "BPQ AX.25"), which could be
+ useful if some other computer on your local network has a direct
+ amateur radio connection.
+
+config SCC
+ tristate "Z8530 SCC driver"
+ depends on ISA && AX25 && ISA_DMA_API
+ help
+ These cards are used to connect your Linux box to an amateur radio
+ in order to communicate with other computers. If you want to use
+ this, read
+ <file:Documentation/networking/device_drivers/hamradio/z8530drv.rst>
+ and the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Also make sure to say Y
+ to "Amateur Radio AX.25 Level 2" support.
+
+ To compile this driver as a module, choose M here: the module
+ will be called scc.
+
+config SCC_DELAY
+ bool "additional delay for PA0HZP OptoSCC compatible boards"
+ depends on SCC
+ help
+ Say Y here if you experience problems with the SCC driver not
+ working properly; please read
+ <file:Documentation/networking/device_drivers/hamradio/z8530drv.rst>
+ for details.
+
+ If unsure, say N.
+
+config SCC_TRXECHO
+ bool "support for TRX that feedback the tx signal to rx"
+ depends on SCC
+ help
+ Some transmitters feed the transmitted signal back to the receive
+ line. Say Y here to foil this by explicitly disabling the receiver
+ during data transmission.
+
+ If in doubt, say Y.
+
+config BAYCOM_SER_FDX
+ tristate "BAYCOM ser12 fullduplex driver for AX.25"
+ depends on AX25 && !S390
+ select CRC_CCITT
+ help
+ This is one of two drivers for Baycom style simple amateur radio
+ modems that connect to a serial interface. The driver supports the
+ ser12 design in full-duplex mode. In addition, it allows the
+ baudrate to be set between 300 and 4800 baud (however not all modems
+ support all baudrates). This is the preferred driver. The next
+ driver, "BAYCOM ser12 half-duplex driver for AX.25" is the old
+ driver and still provided in case this driver does not work with
+ your serial interface chip. To configure the driver, use the sethdlc
+ utility available in the standard ax25 utilities package. For
+ information on the modems, see <http://www.baycom.de/> and
+ <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_ser_fdx. This is recommended.
+
+config BAYCOM_SER_HDX
+ tristate "BAYCOM ser12 halfduplex driver for AX.25"
+ depends on AX25 && !S390
+ select CRC_CCITT
+ help
+ This is one of two drivers for Baycom style simple amateur radio
+ modems that connect to a serial interface. The driver supports the
+ ser12 design in half-duplex mode. This is the old driver. It is
+ still provided in case your serial interface chip does not work with
+ the full-duplex driver. This driver is deprecated. To configure
+ the driver, use the sethdlc utility available in the standard ax25
+ utilities package. For information on the modems, see
+ <http://www.baycom.de/> and
+ <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_ser_hdx. This is recommended.
+
+config BAYCOM_PAR
+ tristate "BAYCOM picpar and par96 driver for AX.25"
+ depends on PARPORT && AX25
+ select CRC_CCITT
+ help
+ This is a driver for Baycom style simple amateur radio modems that
+ connect to a parallel interface. The driver supports the picpar and
+ par96 designs. To configure the driver, use the sethdlc utility
+ available in the standard ax25 utilities package. For information on
+ the modems, see <http://www.baycom.de/> and the file
+ <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_par. This is recommended.
+
+config BAYCOM_EPP
+ tristate "BAYCOM epp driver for AX.25"
+ depends on PARPORT && AX25 && !64BIT
+ select CRC_CCITT
+ help
+ This is a driver for Baycom style simple amateur radio modems that
+ connect to a parallel interface. The driver supports the EPP
+ designs. To configure the driver, use the sethdlc utility available
+ in the standard ax25 utilities package. For information on the
+ modems, see <http://www.baycom.de/> and the file
+ <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_epp. This is recommended.
+
+config YAM
+ tristate "YAM driver for AX.25"
+ depends on AX25 && !S390
+ help
+ The YAM is a modem for packet radio which connects to the serial
+ port and includes some of the functions of a Terminal Node
+ Controller. If you have one of those, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called yam.
+
+