Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 165 insertions, 0 deletions

diff --git a/drivers/net/ipa/ipa.h b/drivers/net/ipa/ipa.h
new file mode 100644
index 000000000..09ead433e
--- /dev/null
+++ b/drivers/net/ipa/ipa.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2022 Linaro Ltd.
+ */
+#ifndef _IPA_H_
+#define _IPA_H_
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/pm_wakeup.h>
+
+#include "ipa_version.h"
+#include "gsi.h"
+#include "ipa_mem.h"
+#include "ipa_qmi.h"
+#include "ipa_endpoint.h"
+#include "ipa_interrupt.h"
+
+struct clk;
+struct icc_path;
+struct net_device;
+struct platform_device;
+
+struct ipa_power;
+struct ipa_smp2p;
+struct ipa_interrupt;
+
+/**
+ * struct ipa - IPA information
+ * @gsi:		Embedded GSI structure
+ * @version:		IPA hardware version
+ * @pdev:		Platform device
+ * @completion:		Used to signal pipeline clear transfer complete
+ * @nb:			Notifier block used for remoteproc SSR
+ * @notifier:		Remoteproc SSR notifier
+ * @smp2p:		SMP2P information
+ * @power:		IPA power information
+ * @table_addr:		DMA address of filter/route table content
+ * @table_virt:		Virtual address of filter/route table content
+ * @interrupt:		IPA Interrupt information
+ * @uc_powered:		true if power is active by proxy for microcontroller
+ * @uc_loaded:		true after microcontroller has reported it's ready
+ * @reg_addr:		DMA address used for IPA register access
+ * @reg_virt:		Virtual address used for IPA register access
+ * @regs:		IPA register definitions
+ * @mem_addr:		DMA address of IPA-local memory space
+ * @mem_virt:		Virtual address of IPA-local memory space
+ * @mem_offset:		Offset from @mem_virt used for access to IPA memory
+ * @mem_size:		Total size (bytes) of memory at @mem_virt
+ * @mem_count:		Number of entries in the mem array
+ * @mem:		Array of IPA-local memory region descriptors
+ * @imem_iova:		I/O virtual address of IPA region in IMEM
+ * @imem_size:		Size of IMEM region
+ * @smem_iova:		I/O virtual address of IPA region in SMEM
+ * @smem_size:		Size of SMEM region
+ * @zero_addr:		DMA address of preallocated zero-filled memory
+ * @zero_virt:		Virtual address of preallocated zero-filled memory
+ * @zero_size:		Size (bytes) of preallocated zero-filled memory
+ * @available:		Bit mask indicating endpoints hardware supports
+ * @filter_map:		Bit mask indicating endpoints that support filtering
+ * @initialized:	Bit mask indicating endpoints initialized
+ * @set_up:		Bit mask indicating endpoints set up
+ * @enabled:		Bit mask indicating endpoints enabled
+ * @modem_tx_count:	Number of defined modem TX endoints
+ * @endpoint:		Array of endpoint information
+ * @channel_map:	Mapping of GSI channel to IPA endpoint
+ * @name_map:		Mapping of IPA endpoint name to IPA endpoint
+ * @setup_complete:	Flag indicating whether setup stage has completed
+ * @modem_state:	State of modem (stopped, running)
+ * @modem_netdev:	Network device structure used for modem
+ * @qmi:		QMI information
+ */
+struct ipa {
+	struct gsi gsi;
+	enum ipa_version version;
+	struct platform_device *pdev;
+	struct completion completion;
+	struct notifier_block nb;
+	void *notifier;
+	struct ipa_smp2p *smp2p;
+	struct ipa_power *power;
+
+	dma_addr_t table_addr;
+	__le64 *table_virt;
+
+	struct ipa_interrupt *interrupt;
+	bool uc_powered;
+	bool uc_loaded;
+
+	dma_addr_t reg_addr;
+	void __iomem *reg_virt;
+	const struct ipa_regs *regs;
+
+	dma_addr_t mem_addr;
+	void *mem_virt;
+	u32 mem_offset;
+	u32 mem_size;
+	u32 mem_count;
+	const struct ipa_mem *mem;
+
+	unsigned long imem_iova;
+	size_t imem_size;
+
+	unsigned long smem_iova;
+	size_t smem_size;
+
+	dma_addr_t zero_addr;
+	void *zero_virt;
+	size_t zero_size;
+
+	/* Bit masks indicating endpoint state */
+	u32 available;		/* supported by hardware */
+	u32 filter_map;
+	u32 initialized;
+	u32 set_up;
+	u32 enabled;
+
+	u32 modem_tx_count;
+	struct ipa_endpoint endpoint[IPA_ENDPOINT_MAX];
+	struct ipa_endpoint *channel_map[GSI_CHANNEL_COUNT_MAX];
+	struct ipa_endpoint *name_map[IPA_ENDPOINT_COUNT];
+
+	bool setup_complete;
+
+	atomic_t modem_state;		/* enum ipa_modem_state */
+	struct net_device *modem_netdev;
+	struct ipa_qmi qmi;
+};
+
+/**
+ * ipa_setup() - Perform IPA setup
+ * @ipa:		IPA pointer
+ *
+ * IPA initialization is broken into stages:  init; config; and setup.
+ * (These have inverses exit, deconfig, and teardown.)
+ *
+ * Activities performed at the init stage can be done without requiring
+ * any access to IPA hardware.  Activities performed at the config stage
+ * require IPA power, because they involve access to IPA registers.
+ * The setup stage is performed only after the GSI hardware is ready
+ * (more on this below).  The setup stage allows the AP to perform
+ * more complex initialization by issuing "immediate commands" using
+ * a special interface to the IPA.
+ *
+ * This function, @ipa_setup(), starts the setup stage.
+ *
+ * In order for the GSI hardware to be functional it needs firmware to be
+ * loaded (in addition to some other low-level initialization).  This early
+ * GSI initialization can be done either by Trust Zone on the AP or by the
+ * modem.
+ *
+ * If it's done by Trust Zone, the AP loads the GSI firmware and supplies
+ * it to Trust Zone to verify and install.  When this completes, if
+ * verification was successful, the GSI layer is ready and ipa_setup()
+ * implements the setup phase of initialization.
+ *
+ * If the modem performs early GSI initialization, the AP needs to know
+ * when this has occurred.  An SMP2P interrupt is used for this purpose,
+ * and receipt of that interrupt triggers the call to ipa_setup().
+ */
+int ipa_setup(struct ipa *ipa);
+
+#endif /* _IPA_H_ */