Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 178 insertions, 0 deletions

diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
new file mode 100644
index 000000000..ac4d162d9
--- /dev/null
+++ b/drivers/net/ppp/Kconfig
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PPP network device configuration
+#
+
+config PPP
+	tristate "PPP (point-to-point protocol) support"
+	select SLHC
+	help
+	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+	  the same purpose: sending Internet traffic over telephone (and other
+	  serial) lines.  Ask your access provider if they support it, because
+	  otherwise you can't use it; most Internet access providers these
+	  days support PPP rather than SLIP.
+
+	  To use PPP, you need an additional program called pppd as described
+	  in the PPP-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
+	  the version of pppd recommended in <file:Documentation/Changes>.
+	  The PPP option enlarges your kernel by about 16 KB.
+
+	  There are actually two versions of PPP: the traditional PPP for
+	  asynchronous lines, such as regular analog phone lines, and
+	  synchronous PPP which can be used over digital ISDN lines for
+	  example.  If you want to use PPP over phone lines or other
+	  asynchronous serial lines, you need to say Y (or M) here and also to
+	  the next option, "PPP support for async serial ports".  For PPP over
+	  synchronous lines, you should say Y (or M) here and to "Support
+	  synchronous PPP", below.
+
+	  If you said Y to "Version information on all symbols" above, then
+	  you cannot compile the PPP driver into the kernel; you can then only
+	  compile it as a module. To compile this driver as a module, choose M
+	  here. The module will be called ppp_generic.
+
+if PPP
+
+config PPP_BSDCOMP
+	tristate "PPP BSD-Compress compression"
+	depends on PPP
+	help
+	  Support for the BSD-Compress compression method for PPP, which uses
+	  the LZW compression method to compress each PPP packet before it is
+	  sent over the wire. The machine at the other end of the PPP link
+	  (usually your ISP) has to support the BSD-Compress compression
+	  method as well for this to be useful. Even if they don't support it,
+	  it is safe to say Y here.
+
+	  The PPP Deflate compression method ("PPP Deflate compression",
+	  above) is preferable to BSD-Compress, because it compresses better
+	  and is patent-free.
+
+	  Note that the BSD compression code will always be compiled as a
+	  module; it is called bsd_comp and will show up in the directory
+	  modules once you have said "make modules". If unsure, say N.
+
+config PPP_DEFLATE
+	tristate "PPP Deflate compression"
+	depends on PPP
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	help
+	  Support for the Deflate compression method for PPP, which uses the
+	  Deflate algorithm (the same algorithm that gzip uses) to compress
+	  each PPP packet before it is sent over the wire.  The machine at the
+	  other end of the PPP link (usually your ISP) has to support the
+	  Deflate compression method as well for this to be useful.  Even if
+	  they don't support it, it is safe to say Y here.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_FILTER
+	bool "PPP filtering"
+	depends on PPP
+	help
+	  Say Y here if you want to be able to filter the packets passing over
+	  PPP interfaces.  This allows you to control which packets count as
+	  activity (i.e. which packets will reset the idle timer or bring up
+	  a demand-dialed link) and which packets are to be dropped entirely.
+	  You need to say Y here if you wish to use the pass-filter and
+	  active-filter options to pppd.
+
+	  If unsure, say N.
+
+config PPP_MPPE
+	tristate "PPP MPPE compression (encryption)"
+	depends on PPP
+	select CRYPTO
+	select CRYPTO_SHA1
+	select CRYPTO_LIB_ARC4
+	help
+	  Support for the MPPE Encryption protocol, as employed by the
+	  Microsoft Point-to-Point Tunneling Protocol.
+
+	  See http://pptpclient.sourceforge.net/ for information on
+	  configuring PPTP clients and servers to utilize this method.
+
+config PPP_MULTILINK
+	bool "PPP multilink support"
+	depends on PPP
+	help
+	  PPP multilink is a protocol (defined in RFC 1990) which allows you
+	  to combine several (logical or physical) lines into one logical PPP
+	  connection, so that you can utilize your full bandwidth.
+
+	  This has to be supported at the other end as well and you need a
+	  version of the pppd daemon which understands the multilink protocol.
+
+	  If unsure, say N.
+
+config PPPOATM
+	tristate "PPP over ATM"
+	depends on ATM && PPP
+	help
+	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+	  This implementation does not yet comply with section 8 of RFC2364,
+	  which can lead to bad results if the ATM peer loses state and
+	  changes its encapsulation unilaterally.
+
+config PPPOE
+	tristate "PPP over Ethernet"
+	depends on PPP
+	help
+	  Support for PPP over Ethernet.
+
+	  This driver requires the latest version of pppd from the CVS
+	  repository at cvs.samba.org.  Alternatively, see the
+	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+	  which contains instruction on how to use this driver (under
+	  the heading "Kernel mode PPPoE").
+
+config PPTP
+	tristate "PPP over IPv4 (PPTP)"
+	depends on PPP && NET_IPGRE_DEMUX
+	help
+	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
+
+	  This driver requires pppd plugin to work in client mode or
+	  modified pptpd (poptop) to work in server mode.
+	  See http://accel-pptp.sourceforge.net/ for information how to
+	  utilize this module.
+
+config PPPOL2TP
+	tristate "PPP over L2TP"
+	depends on L2TP && PPP
+	help
+	  Support for PPP-over-L2TP socket family. L2TP is a protocol
+	  used by ISPs and enterprises to tunnel PPP traffic over UDP
+	  tunnels. L2TP is replacing PPTP for VPN uses.
+if TTY
+
+config PPP_ASYNC
+	tristate "PPP support for async serial ports"
+	depends on PPP
+	select CRC_CCITT
+	help
+	  Say Y (or M) here if you want to be able to use PPP over standard
+	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+	  need this option.
+
+	  To compile this driver as a module, choose M here.
+
+	  If unsure, say Y.
+
+config PPP_SYNC_TTY
+	tristate "PPP support for sync tty ports"
+	depends on PPP
+	help
+	  Say Y (or M) here if you want to be able to use PPP over synchronous
+	  (HDLC) tty devices, such as the SyncLink adapter. These devices
+	  are often used for high-speed leased lines like T1/E1.
+
+	  To compile this driver as a module, choose M here.
+
+endif # TTY
+
+endif # PPP