Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 859 insertions, 0 deletions

diff --git a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
new file mode 100644
index 000000000..f49365d14
--- /dev/null
+++ b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
@@ -0,0 +1,859 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef B43legacy_H_
+#define B43legacy_H_
+
+#include <linux/hw_random.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/atomic.h>
+#include <linux/io.h>
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/completion.h>
+
+#include <net/mac80211.h>
+
+#include "debugfs.h"
+#include "leds.h"
+#include "rfkill.h"
+#include "phy.h"
+
+
+#define B43legacy_IRQWAIT_MAX_RETRIES	20
+
+/* MMIO offsets */
+#define B43legacy_MMIO_DMA0_REASON	0x20
+#define B43legacy_MMIO_DMA0_IRQ_MASK	0x24
+#define B43legacy_MMIO_DMA1_REASON	0x28
+#define B43legacy_MMIO_DMA1_IRQ_MASK	0x2C
+#define B43legacy_MMIO_DMA2_REASON	0x30
+#define B43legacy_MMIO_DMA2_IRQ_MASK	0x34
+#define B43legacy_MMIO_DMA3_REASON	0x38
+#define B43legacy_MMIO_DMA3_IRQ_MASK	0x3C
+#define B43legacy_MMIO_DMA4_REASON	0x40
+#define B43legacy_MMIO_DMA4_IRQ_MASK	0x44
+#define B43legacy_MMIO_DMA5_REASON	0x48
+#define B43legacy_MMIO_DMA5_IRQ_MASK	0x4C
+#define B43legacy_MMIO_MACCTL		0x120	/* MAC control */
+#define B43legacy_MMIO_MACCMD		0x124	/* MAC command */
+#define B43legacy_MMIO_GEN_IRQ_REASON	0x128
+#define B43legacy_MMIO_GEN_IRQ_MASK	0x12C
+#define B43legacy_MMIO_RAM_CONTROL	0x130
+#define B43legacy_MMIO_RAM_DATA		0x134
+#define B43legacy_MMIO_PS_STATUS		0x140
+#define B43legacy_MMIO_RADIO_HWENABLED_HI	0x158
+#define B43legacy_MMIO_SHM_CONTROL	0x160
+#define B43legacy_MMIO_SHM_DATA		0x164
+#define B43legacy_MMIO_SHM_DATA_UNALIGNED	0x166
+#define B43legacy_MMIO_XMITSTAT_0		0x170
+#define B43legacy_MMIO_XMITSTAT_1		0x174
+#define B43legacy_MMIO_REV3PLUS_TSF_LOW	0x180 /* core rev >= 3 only */
+#define B43legacy_MMIO_REV3PLUS_TSF_HIGH	0x184 /* core rev >= 3 only */
+#define B43legacy_MMIO_TSF_CFP_REP	0x188
+#define B43legacy_MMIO_TSF_CFP_START	0x18C
+/* 32-bit DMA */
+#define B43legacy_MMIO_DMA32_BASE0	0x200
+#define B43legacy_MMIO_DMA32_BASE1	0x220
+#define B43legacy_MMIO_DMA32_BASE2	0x240
+#define B43legacy_MMIO_DMA32_BASE3	0x260
+#define B43legacy_MMIO_DMA32_BASE4	0x280
+#define B43legacy_MMIO_DMA32_BASE5	0x2A0
+/* 64-bit DMA */
+#define B43legacy_MMIO_DMA64_BASE0	0x200
+#define B43legacy_MMIO_DMA64_BASE1	0x240
+#define B43legacy_MMIO_DMA64_BASE2	0x280
+#define B43legacy_MMIO_DMA64_BASE3	0x2C0
+#define B43legacy_MMIO_DMA64_BASE4	0x300
+#define B43legacy_MMIO_DMA64_BASE5	0x340
+/* PIO */
+#define B43legacy_MMIO_PIO1_BASE		0x300
+#define B43legacy_MMIO_PIO2_BASE		0x310
+#define B43legacy_MMIO_PIO3_BASE		0x320
+#define B43legacy_MMIO_PIO4_BASE		0x330
+
+#define B43legacy_MMIO_PHY_VER		0x3E0
+#define B43legacy_MMIO_PHY_RADIO		0x3E2
+#define B43legacy_MMIO_PHY0		0x3E6
+#define B43legacy_MMIO_ANTENNA		0x3E8
+#define B43legacy_MMIO_CHANNEL		0x3F0
+#define B43legacy_MMIO_CHANNEL_EXT	0x3F4
+#define B43legacy_MMIO_RADIO_CONTROL	0x3F6
+#define B43legacy_MMIO_RADIO_DATA_HIGH	0x3F8
+#define B43legacy_MMIO_RADIO_DATA_LOW	0x3FA
+#define B43legacy_MMIO_PHY_CONTROL	0x3FC
+#define B43legacy_MMIO_PHY_DATA		0x3FE
+#define B43legacy_MMIO_MACFILTER_CONTROL	0x420
+#define B43legacy_MMIO_MACFILTER_DATA	0x422
+#define B43legacy_MMIO_RCMTA_COUNT	0x43C /* Receive Match Transmitter Addr */
+#define B43legacy_MMIO_RADIO_HWENABLED_LO	0x49A
+#define B43legacy_MMIO_GPIO_CONTROL	0x49C
+#define B43legacy_MMIO_GPIO_MASK		0x49E
+#define B43legacy_MMIO_TSF_CFP_PRETBTT	0x612
+#define B43legacy_MMIO_TSF_0		0x632 /* core rev < 3 only */
+#define B43legacy_MMIO_TSF_1		0x634 /* core rev < 3 only */
+#define B43legacy_MMIO_TSF_2		0x636 /* core rev < 3 only */
+#define B43legacy_MMIO_TSF_3		0x638 /* core rev < 3 only */
+#define B43legacy_MMIO_RNG		0x65A
+#define B43legacy_MMIO_POWERUP_DELAY	0x6A8
+
+/* SPROM boardflags_lo values */
+#define B43legacy_BFL_PACTRL		0x0002
+#define B43legacy_BFL_RSSI		0x0008
+#define B43legacy_BFL_EXTLNA		0x1000
+
+/* GPIO register offset, in both ChipCommon and PCI core. */
+#define B43legacy_GPIO_CONTROL		0x6c
+
+/* SHM Routing */
+#define	B43legacy_SHM_SHARED		0x0001
+#define	B43legacy_SHM_WIRELESS		0x0002
+#define	B43legacy_SHM_HW		0x0004
+#define	B43legacy_SHM_UCODE		0x0300
+
+/* SHM Routing modifiers */
+#define B43legacy_SHM_AUTOINC_R		0x0200 /* Read Auto-increment */
+#define B43legacy_SHM_AUTOINC_W		0x0100 /* Write Auto-increment */
+#define B43legacy_SHM_AUTOINC_RW	(B43legacy_SHM_AUTOINC_R | \
+					 B43legacy_SHM_AUTOINC_W)
+
+/* Misc SHM_SHARED offsets */
+#define B43legacy_SHM_SH_WLCOREREV	0x0016 /* 802.11 core revision */
+#define B43legacy_SHM_SH_HOSTFLO	0x005E /* Hostflags ucode opts (low) */
+#define B43legacy_SHM_SH_HOSTFHI	0x0060 /* Hostflags ucode opts (high) */
+/* SHM_SHARED crypto engine */
+#define B43legacy_SHM_SH_KEYIDXBLOCK	0x05D4 /* Key index/algorithm block */
+/* SHM_SHARED beacon/AP variables */
+#define B43legacy_SHM_SH_DTIMP		0x0012 /* DTIM period */
+#define B43legacy_SHM_SH_BTL0		0x0018 /* Beacon template length 0 */
+#define B43legacy_SHM_SH_BTL1		0x001A /* Beacon template length 1 */
+#define B43legacy_SHM_SH_BTSFOFF	0x001C /* Beacon TSF offset */
+#define B43legacy_SHM_SH_TIMPOS		0x001E /* TIM position in beacon */
+#define B43legacy_SHM_SH_BEACPHYCTL	0x0054 /* Beacon PHY TX control word */
+/* SHM_SHARED ACK/CTS control */
+#define B43legacy_SHM_SH_ACKCTSPHYCTL	0x0022 /* ACK/CTS PHY control word */
+/* SHM_SHARED probe response variables */
+#define B43legacy_SHM_SH_PRTLEN		0x004A /* Probe Response template length */
+#define B43legacy_SHM_SH_PRMAXTIME	0x0074 /* Probe Response max time */
+#define B43legacy_SHM_SH_PRPHYCTL	0x0188 /* Probe Resp PHY TX control */
+/* SHM_SHARED rate tables */
+#define B43legacy_SHM_SH_OFDMDIRECT	0x0480 /* Pointer to OFDM direct map */
+#define B43legacy_SHM_SH_OFDMBASIC	0x04A0 /* Pointer to OFDM basic rate map */
+#define B43legacy_SHM_SH_CCKDIRECT	0x04C0 /* Pointer to CCK direct map */
+#define B43legacy_SHM_SH_CCKBASIC	0x04E0 /* Pointer to CCK basic rate map */
+/* SHM_SHARED microcode soft registers */
+#define B43legacy_SHM_SH_UCODEREV	0x0000 /* Microcode revision */
+#define B43legacy_SHM_SH_UCODEPATCH	0x0002 /* Microcode patchlevel */
+#define B43legacy_SHM_SH_UCODEDATE	0x0004 /* Microcode date */
+#define B43legacy_SHM_SH_UCODETIME	0x0006 /* Microcode time */
+#define B43legacy_SHM_SH_SPUWKUP	0x0094 /* pre-wakeup for synth PU in us */
+#define B43legacy_SHM_SH_PRETBTT	0x0096 /* pre-TBTT in us */
+
+#define B43legacy_UCODEFLAGS_OFFSET     0x005E
+
+/* Hardware Radio Enable masks */
+#define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
+/* HostFlags. See b43legacy_hf_read/write() */
+#define B43legacy_HF_SYMW		0x00000002 /* G-PHY SYM workaround */
+#define B43legacy_HF_GDCW		0x00000020 /* G-PHY DV cancel filter */
+#define B43legacy_HF_OFDMPABOOST	0x00000040 /* Enable PA boost OFDM */
+#define B43legacy_HF_EDCF		0x00000100 /* on if WME/MAC suspended */
+
+/* MacFilter offsets. */
+#define B43legacy_MACFILTER_SELF	0x0000
+#define B43legacy_MACFILTER_BSSID	0x0003
+#define B43legacy_MACFILTER_MAC		0x0010
+
+/* PHYVersioning */
+#define B43legacy_PHYTYPE_B		0x01
+#define B43legacy_PHYTYPE_G		0x02
+
+/* PHYRegisters */
+#define B43legacy_PHY_G_LO_CONTROL	0x0810
+#define B43legacy_PHY_ILT_G_CTRL	0x0472
+#define B43legacy_PHY_ILT_G_DATA1	0x0473
+#define B43legacy_PHY_ILT_G_DATA2	0x0474
+#define B43legacy_PHY_G_PCTL		0x0029
+#define B43legacy_PHY_RADIO_BITFIELD	0x0401
+#define B43legacy_PHY_G_CRS		0x0429
+#define B43legacy_PHY_NRSSILT_CTRL	0x0803
+#define B43legacy_PHY_NRSSILT_DATA	0x0804
+
+/* RadioRegisters */
+#define B43legacy_RADIOCTL_ID		0x01
+
+/* MAC Control bitfield */
+#define B43legacy_MACCTL_ENABLED	0x00000001 /* MAC Enabled */
+#define B43legacy_MACCTL_PSM_RUN	0x00000002 /* Run Microcode */
+#define B43legacy_MACCTL_PSM_JMP0	0x00000004 /* Microcode jump to 0 */
+#define B43legacy_MACCTL_SHM_ENABLED	0x00000100 /* SHM Enabled */
+#define B43legacy_MACCTL_IHR_ENABLED	0x00000400 /* IHR Region Enabled */
+#define B43legacy_MACCTL_BE		0x00010000 /* Big Endian mode */
+#define B43legacy_MACCTL_INFRA		0x00020000 /* Infrastructure mode */
+#define B43legacy_MACCTL_AP		0x00040000 /* AccessPoint mode */
+#define B43legacy_MACCTL_RADIOLOCK	0x00080000 /* Radio lock */
+#define B43legacy_MACCTL_BEACPROMISC	0x00100000 /* Beacon Promiscuous */
+#define B43legacy_MACCTL_KEEP_BADPLCP	0x00200000 /* Keep bad PLCP frames */
+#define B43legacy_MACCTL_KEEP_CTL	0x00400000 /* Keep control frames */
+#define B43legacy_MACCTL_KEEP_BAD	0x00800000 /* Keep bad frames (FCS) */
+#define B43legacy_MACCTL_PROMISC	0x01000000 /* Promiscuous mode */
+#define B43legacy_MACCTL_HWPS		0x02000000 /* Hardware Power Saving */
+#define B43legacy_MACCTL_AWAKE		0x04000000 /* Device is awake */
+#define B43legacy_MACCTL_TBTTHOLD	0x10000000 /* TBTT Hold */
+#define B43legacy_MACCTL_GMODE		0x80000000 /* G Mode */
+
+/* MAC Command bitfield */
+#define B43legacy_MACCMD_BEACON0_VALID	0x00000001 /* Beacon 0 in template RAM is busy/valid */
+#define B43legacy_MACCMD_BEACON1_VALID	0x00000002 /* Beacon 1 in template RAM is busy/valid */
+#define B43legacy_MACCMD_DFQ_VALID	0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */
+#define B43legacy_MACCMD_CCA		0x00000008 /* Clear channel assessment */
+#define B43legacy_MACCMD_BGNOISE	0x00000010 /* Background noise */
+
+/* 802.11 core specific TM State Low flags */
+#define B43legacy_TMSLOW_GMODE		0x20000000 /* G Mode Enable */
+#define B43legacy_TMSLOW_PLLREFSEL	0x00200000 /* PLL Freq Ref Select */
+#define B43legacy_TMSLOW_MACPHYCLKEN	0x00100000 /* MAC PHY Clock Ctrl Enbl */
+#define B43legacy_TMSLOW_PHYRESET	0x00080000 /* PHY Reset */
+#define B43legacy_TMSLOW_PHYCLKEN	0x00040000 /* PHY Clock Enable */
+
+/* 802.11 core specific TM State High flags */
+#define B43legacy_TMSHIGH_FCLOCK	0x00040000 /* Fast Clock Available */
+#define B43legacy_TMSHIGH_GPHY		0x00010000 /* G-PHY avail (rev >= 5) */
+
+#define B43legacy_UCODEFLAG_AUTODIV       0x0001
+
+/* Generic-Interrupt reasons. */
+#define B43legacy_IRQ_MAC_SUSPENDED	0x00000001
+#define B43legacy_IRQ_BEACON		0x00000002
+#define B43legacy_IRQ_TBTT_INDI		0x00000004 /* Target Beacon Transmit Time */
+#define B43legacy_IRQ_BEACON_TX_OK	0x00000008
+#define B43legacy_IRQ_BEACON_CANCEL	0x00000010
+#define B43legacy_IRQ_ATIM_END		0x00000020
+#define B43legacy_IRQ_PMQ		0x00000040
+#define B43legacy_IRQ_PIO_WORKAROUND	0x00000100
+#define B43legacy_IRQ_MAC_TXERR		0x00000200
+#define B43legacy_IRQ_PHY_TXERR		0x00000800
+#define B43legacy_IRQ_PMEVENT		0x00001000
+#define B43legacy_IRQ_TIMER0		0x00002000
+#define B43legacy_IRQ_TIMER1		0x00004000
+#define B43legacy_IRQ_DMA		0x00008000
+#define B43legacy_IRQ_TXFIFO_FLUSH_OK	0x00010000
+#define B43legacy_IRQ_CCA_MEASURE_OK	0x00020000
+#define B43legacy_IRQ_NOISESAMPLE_OK	0x00040000
+#define B43legacy_IRQ_UCODE_DEBUG	0x08000000
+#define B43legacy_IRQ_RFKILL		0x10000000
+#define B43legacy_IRQ_TX_OK		0x20000000
+#define B43legacy_IRQ_PHY_G_CHANGED	0x40000000
+#define B43legacy_IRQ_TIMEOUT		0x80000000
+
+#define B43legacy_IRQ_ALL		0xFFFFFFFF
+#define B43legacy_IRQ_MASKTEMPLATE	(B43legacy_IRQ_MAC_SUSPENDED |	\
+					 B43legacy_IRQ_TBTT_INDI |	\
+					 B43legacy_IRQ_ATIM_END |	\
+					 B43legacy_IRQ_PMQ |		\
+					 B43legacy_IRQ_MAC_TXERR |	\
+					 B43legacy_IRQ_PHY_TXERR |	\
+					 B43legacy_IRQ_DMA |		\
+					 B43legacy_IRQ_TXFIFO_FLUSH_OK | \
+					 B43legacy_IRQ_NOISESAMPLE_OK | \
+					 B43legacy_IRQ_UCODE_DEBUG |	\
+					 B43legacy_IRQ_RFKILL |		\
+					 B43legacy_IRQ_TX_OK)
+
+/* Device specific rate values.
+ * The actual values defined here are (rate_in_mbps * 2).
+ * Some code depends on this. Don't change it. */
+#define B43legacy_CCK_RATE_1MB		2
+#define B43legacy_CCK_RATE_2MB		4
+#define B43legacy_CCK_RATE_5MB		11
+#define B43legacy_CCK_RATE_11MB		22
+#define B43legacy_OFDM_RATE_6MB		12
+#define B43legacy_OFDM_RATE_9MB		18
+#define B43legacy_OFDM_RATE_12MB	24
+#define B43legacy_OFDM_RATE_18MB	36
+#define B43legacy_OFDM_RATE_24MB	48
+#define B43legacy_OFDM_RATE_36MB	72
+#define B43legacy_OFDM_RATE_48MB	96
+#define B43legacy_OFDM_RATE_54MB	108
+/* Convert a b43legacy rate value to a rate in 100kbps */
+#define B43legacy_RATE_TO_100KBPS(rate)	(((rate) * 10) / 2)
+
+
+#define B43legacy_DEFAULT_SHORT_RETRY_LIMIT	7
+#define B43legacy_DEFAULT_LONG_RETRY_LIMIT	4
+
+#define B43legacy_PHY_TX_BADNESS_LIMIT		1000
+
+/* Max size of a security key */
+#define B43legacy_SEC_KEYSIZE		16
+/* Security algorithms. */
+enum {
+	B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
+	B43legacy_SEC_ALGO_WEP40,
+	B43legacy_SEC_ALGO_TKIP,
+	B43legacy_SEC_ALGO_AES,
+	B43legacy_SEC_ALGO_WEP104,
+	B43legacy_SEC_ALGO_AES_LEGACY,
+};
+
+/* Core Information Registers */
+#define B43legacy_CIR_BASE                0xf00
+#define B43legacy_CIR_SBTPSFLAG           (B43legacy_CIR_BASE + 0x18)
+#define B43legacy_CIR_SBIMSTATE           (B43legacy_CIR_BASE + 0x90)
+#define B43legacy_CIR_SBINTVEC            (B43legacy_CIR_BASE + 0x94)
+#define B43legacy_CIR_SBTMSTATELOW        (B43legacy_CIR_BASE + 0x98)
+#define B43legacy_CIR_SBTMSTATEHIGH       (B43legacy_CIR_BASE + 0x9c)
+#define B43legacy_CIR_SBIMCONFIGLOW       (B43legacy_CIR_BASE + 0xa8)
+#define B43legacy_CIR_SB_ID_HI            (B43legacy_CIR_BASE + 0xfc)
+
+/* sbtmstatehigh state flags */
+#define B43legacy_SBTMSTATEHIGH_SERROR		0x00000001
+#define B43legacy_SBTMSTATEHIGH_BUSY		0x00000004
+#define B43legacy_SBTMSTATEHIGH_TIMEOUT		0x00000020
+#define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL	0x00010000
+#define B43legacy_SBTMSTATEHIGH_COREFLAGS	0x1FFF0000
+#define B43legacy_SBTMSTATEHIGH_DMA64BIT	0x10000000
+#define B43legacy_SBTMSTATEHIGH_GATEDCLK	0x20000000
+#define B43legacy_SBTMSTATEHIGH_BISTFAILED	0x40000000
+#define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE	0x80000000
+
+/* sbimstate flags */
+#define B43legacy_SBIMSTATE_IB_ERROR		0x20000
+#define B43legacy_SBIMSTATE_TIMEOUT		0x40000
+
+#define PFX		KBUILD_MODNAME ": "
+#ifdef assert
+# undef assert
+#endif
+#ifdef CONFIG_B43LEGACY_DEBUG
+# define B43legacy_WARN_ON(x)	WARN_ON(x)
+# define B43legacy_BUG_ON(expr)						\
+	do {								\
+		if (unlikely((expr))) {					\
+			printk(KERN_INFO PFX "Test (%s) failed\n",	\
+					      #expr);			\
+			BUG_ON(expr);					\
+		}							\
+	} while (0)
+# define B43legacy_DEBUG	1
+#else
+/* This will evaluate the argument even if debugging is disabled. */
+static inline bool __b43legacy_warn_on_dummy(bool x) { return x; }
+# define B43legacy_WARN_ON(x)	__b43legacy_warn_on_dummy(unlikely(!!(x)))
+# define B43legacy_BUG_ON(x)	do { /* nothing */ } while (0)
+# define B43legacy_DEBUG	0
+#endif
+
+
+struct net_device;
+struct pci_dev;
+struct b43legacy_dmaring;
+struct b43legacy_pioqueue;
+
+/* The firmware file header */
+#define B43legacy_FW_TYPE_UCODE	'u'
+#define B43legacy_FW_TYPE_PCM	'p'
+#define B43legacy_FW_TYPE_IV	'i'
+struct b43legacy_fw_header {
+	/* File type */
+	u8 type;
+	/* File format version */
+	u8 ver;
+	u8 __padding[2];
+	/* Size of the data. For ucode and PCM this is in bytes.
+	 * For IV this is number-of-ivs. */
+	__be32 size;
+} __packed;
+
+/* Initial Value file format */
+#define B43legacy_IV_OFFSET_MASK	0x7FFF
+#define B43legacy_IV_32BIT		0x8000
+struct b43legacy_iv {
+	__be16 offset_size;
+	union {
+		__be16 d16;
+		__be32 d32;
+	} __packed data;
+} __packed;
+
+#define B43legacy_PHYMODE(phytype)	(1 << (phytype))
+#define B43legacy_PHYMODE_B		B43legacy_PHYMODE	\
+					((B43legacy_PHYTYPE_B))
+#define B43legacy_PHYMODE_G		B43legacy_PHYMODE	\
+					((B43legacy_PHYTYPE_G))
+
+/* Value pair to measure the LocalOscillator. */
+struct b43legacy_lopair {
+	s8 low;
+	s8 high;
+	u8 used:1;
+};
+#define B43legacy_LO_COUNT	(14*4)
+
+struct b43legacy_phy {
+	/* Possible PHYMODEs on this PHY */
+	u8 possible_phymodes;
+	/* GMODE bit enabled in MACCTL? */
+	bool gmode;
+
+	/* Analog Type */
+	u8 analog;
+	/* B43legacy_PHYTYPE_ */
+	u8 type;
+	/* PHY revision number. */
+	u8 rev;
+
+	u16 antenna_diversity;
+	u16 savedpctlreg;
+	/* Radio versioning */
+	u16 radio_manuf;	/* Radio manufacturer */
+	u16 radio_ver;		/* Radio version */
+	u8 calibrated:1;
+	u8 radio_rev;		/* Radio revision */
+
+	bool dyn_tssi_tbl;	/* tssi2dbm is kmalloc()ed. */
+
+	/* ACI (adjacent channel interference) flags. */
+	bool aci_enable;
+	bool aci_wlan_automatic;
+	bool aci_hw_rssi;
+
+	/* Radio switched on/off */
+	bool radio_on;
+	struct {
+		/* Values saved when turning the radio off.
+		 * They are needed when turning it on again. */
+		bool valid;
+		u16 rfover;
+		u16 rfoverval;
+	} radio_off_context;
+
+	u16 minlowsig[2];
+	u16 minlowsigpos[2];
+
+	/* LO Measurement Data.
+	 * Use b43legacy_get_lopair() to get a value.
+	 */
+	struct b43legacy_lopair *_lo_pairs;
+	/* TSSI to dBm table in use */
+	const s8 *tssi2dbm;
+	/* idle TSSI value */
+	s8 idle_tssi;
+	/* Target idle TSSI */
+	int tgt_idle_tssi;
+	/* Current idle TSSI */
+	int cur_idle_tssi;
+
+	/* LocalOscillator control values. */
+	struct b43legacy_txpower_lo_control *lo_control;
+	/* Values from b43legacy_calc_loopback_gain() */
+	s16 max_lb_gain;	/* Maximum Loopback gain in hdB */
+	s16 trsw_rx_gain;	/* TRSW RX gain in hdB */
+	s16 lna_lod_gain;	/* LNA lod */
+	s16 lna_gain;		/* LNA */
+	s16 pga_gain;		/* PGA */
+
+	/* Desired TX power level (in dBm). This is set by the user and
+	 * adjusted in b43legacy_phy_xmitpower(). */
+	u8 power_level;
+
+	/* Values from b43legacy_calc_loopback_gain() */
+	u16 loopback_gain[2];
+
+	/* TX Power control values. */
+	/* B/G PHY */
+	struct {
+		/* Current Radio Attenuation for TXpower recalculation. */
+		u16 rfatt;
+		/* Current Baseband Attenuation for TXpower recalculation. */
+		u16 bbatt;
+		/* Current TXpower control value for TXpower recalculation. */
+		u16 txctl1;
+		u16 txctl2;
+	};
+	/* A PHY */
+	struct {
+		u16 txpwr_offset;
+	};
+
+	/* Current Interference Mitigation mode */
+	int interfmode;
+	/* Stack of saved values from the Interference Mitigation code.
+	 * Each value in the stack is laid out as follows:
+	 * bit 0-11:  offset
+	 * bit 12-15: register ID
+	 * bit 16-32: value
+	 * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
+	 */
+#define B43legacy_INTERFSTACK_SIZE	26
+	u32 interfstack[B43legacy_INTERFSTACK_SIZE];
+
+	/* Saved values from the NRSSI Slope calculation */
+	s16 nrssi[2];
+	s32 nrssislope;
+	/* In memory nrssi lookup table. */
+	s8 nrssi_lt[64];
+
+	/* current channel */
+	u8 channel;
+
+	u16 lofcal;
+
+	u16 initval;
+
+	/* PHY TX errors counter. */
+	atomic_t txerr_cnt;
+
+#if B43legacy_DEBUG
+	/* Manual TX-power control enabled? */
+	bool manual_txpower_control;
+	/* PHY registers locked by b43legacy_phy_lock()? */
+	bool phy_locked;
+#endif /* B43legacy_DEBUG */
+};
+
+/* Data structures for DMA transmission, per 80211 core. */
+struct b43legacy_dma {
+	struct b43legacy_dmaring *tx_ring0;
+	struct b43legacy_dmaring *tx_ring1;
+	struct b43legacy_dmaring *tx_ring2;
+	struct b43legacy_dmaring *tx_ring3;
+	struct b43legacy_dmaring *tx_ring4;
+	struct b43legacy_dmaring *tx_ring5;
+
+	struct b43legacy_dmaring *rx_ring0;
+	struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */
+
+	u32 translation; /* Routing bits */
+};
+
+/* Data structures for PIO transmission, per 80211 core. */
+struct b43legacy_pio {
+	struct b43legacy_pioqueue *queue0;
+	struct b43legacy_pioqueue *queue1;
+	struct b43legacy_pioqueue *queue2;
+	struct b43legacy_pioqueue *queue3;
+};
+
+/* Context information for a noise calculation (Link Quality). */
+struct b43legacy_noise_calculation {
+	u8 channel_at_start;
+	bool calculation_running;
+	u8 nr_samples;
+	s8 samples[8][4];
+};
+
+struct b43legacy_stats {
+	u8 link_noise;
+	/* Store the last TX/RX times here for updating the leds. */
+	unsigned long last_tx;
+	unsigned long last_rx;
+};
+
+struct b43legacy_key {
+	void *keyconf;
+	bool enabled;
+	u8 algorithm;
+};
+
+#define B43legacy_QOS_QUEUE_NUM	4
+
+struct b43legacy_wldev;
+
+/* QOS parameters for a queue. */
+struct b43legacy_qos_params {
+	/* The QOS parameters */
+	struct ieee80211_tx_queue_params p;
+};
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */
+struct b43legacy_wl {
+	/* Pointer to the active wireless device on this chip */
+	struct b43legacy_wldev *current_dev;
+	/* Pointer to the ieee80211 hardware data structure */
+	struct ieee80211_hw *hw;
+
+	spinlock_t irq_lock;		/* locks IRQ */
+	struct mutex mutex;		/* locks wireless core state */
+	spinlock_t leds_lock;		/* lock for leds */
+
+	/* firmware loading work */
+	struct work_struct firmware_load;
+
+	/* We can only have one operating interface (802.11 core)
+	 * at a time. General information about this interface follows.
+	 */
+
+	struct ieee80211_vif *vif;
+	/* MAC address (can be NULL). */
+	u8 mac_addr[ETH_ALEN];
+	/* Current BSSID (can be NULL). */
+	u8 bssid[ETH_ALEN];
+	/* Interface type. (IEEE80211_IF_TYPE_XXX) */
+	int if_type;
+	/* Is the card operating in AP, STA or IBSS mode? */
+	bool operating;
+	/* filter flags */
+	unsigned int filter_flags;
+	/* Stats about the wireless interface */
+	struct ieee80211_low_level_stats ieee_stats;
+
+#ifdef CONFIG_B43LEGACY_HWRNG
+	struct hwrng rng;
+	u8 rng_initialized;
+	char rng_name[30 + 1];
+#endif
+
+	/* List of all wireless devices on this chip */
+	struct list_head devlist;
+	u8 nr_devs;
+
+	bool radiotap_enabled;
+	bool radio_enabled;
+
+	/* The beacon we are currently using (AP or IBSS mode).
+	 * This beacon stuff is protected by the irq_lock. */
+	struct sk_buff *current_beacon;
+	bool beacon0_uploaded;
+	bool beacon1_uploaded;
+	bool beacon_templates_virgin; /* Never wrote the templates? */
+	struct work_struct beacon_update_trigger;
+	/* The current QOS parameters for the 4 queues. */
+	struct b43legacy_qos_params qos_params[B43legacy_QOS_QUEUE_NUM];
+
+	/* Packet transmit work */
+	struct work_struct tx_work;
+
+	/* Queue of packets to be transmitted. */
+	struct sk_buff_head tx_queue[B43legacy_QOS_QUEUE_NUM];
+
+	/* Flag that implement the queues stopping. */
+	bool tx_queue_stopped[B43legacy_QOS_QUEUE_NUM];
+
+};
+
+/* Pointers to the firmware data and meta information about it. */
+struct b43legacy_firmware {
+	/* Microcode */
+	const struct firmware *ucode;
+	/* PCM code */
+	const struct firmware *pcm;
+	/* Initial MMIO values for the firmware */
+	const struct firmware *initvals;
+	/* Initial MMIO values for the firmware, band-specific */
+	const struct firmware *initvals_band;
+	/* Firmware revision */
+	u16 rev;
+	/* Firmware patchlevel */
+	u16 patch;
+};
+
+/* Device (802.11 core) initialization status. */
+enum {
+	B43legacy_STAT_UNINIT		= 0, /* Uninitialized. */
+	B43legacy_STAT_INITIALIZED	= 1, /* Initialized, not yet started. */
+	B43legacy_STAT_STARTED	= 2, /* Up and running. */
+};
+#define b43legacy_status(wldev)	atomic_read(&(wldev)->__init_status)
+#define b43legacy_set_status(wldev, stat)	do {		\
+		atomic_set(&(wldev)->__init_status, (stat));	\
+		smp_wmb();					\
+					} while (0)
+
+/* *** ---   HOW LOCKING WORKS IN B43legacy   --- ***
+ *
+ * You should always acquire both, wl->mutex and wl->irq_lock unless:
+ * - You don't need to acquire wl->irq_lock, if the interface is stopped.
+ * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
+ *   and packet TX path (and _ONLY_ there.)
+ */
+
+/* Data structure for one wireless device (802.11 core) */
+struct b43legacy_wldev {
+	struct ssb_device *dev;
+	struct b43legacy_wl *wl;
+
+	/* The device initialization status.
+	 * Use b43legacy_status() to query. */
+	atomic_t __init_status;
+	/* Saved init status for handling suspend. */
+	int suspend_init_status;
+
+	bool __using_pio;	/* Using pio rather than dma. */
+	bool bad_frames_preempt;/* Use "Bad Frames Preemption". */
+	bool dfq_valid;		/* Directed frame queue valid (IBSS PS mode, ATIM). */
+	bool short_preamble;	/* TRUE if using short preamble. */
+	bool radio_hw_enable;	/* State of radio hardware enable bit. */
+
+	/* PHY/Radio device. */
+	struct b43legacy_phy phy;
+	union {
+		/* DMA engines. */
+		struct b43legacy_dma dma;
+		/* PIO engines. */
+		struct b43legacy_pio pio;
+	};
+
+	/* Various statistics about the physical device. */
+	struct b43legacy_stats stats;
+
+	/* The device LEDs. */
+	struct b43legacy_led led_tx;
+	struct b43legacy_led led_rx;
+	struct b43legacy_led led_assoc;
+	struct b43legacy_led led_radio;
+
+	/* Reason code of the last interrupt. */
+	u32 irq_reason;
+	u32 dma_reason[6];
+	/* The currently active generic-interrupt mask. */
+	u32 irq_mask;
+	/* Link Quality calculation context. */
+	struct b43legacy_noise_calculation noisecalc;
+	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
+	int mac_suspended;
+
+	/* Interrupt Service Routine tasklet (bottom-half) */
+	struct tasklet_struct isr_tasklet;
+
+	/* Periodic tasks */
+	struct delayed_work periodic_work;
+	unsigned int periodic_state;
+
+	struct work_struct restart_work;
+
+	/* encryption/decryption */
+	u16 ktp; /* Key table pointer */
+	u8 max_nr_keys;
+	struct b43legacy_key key[58];
+
+	/* Firmware data */
+	struct b43legacy_firmware fw;
+	const struct firmware *fwp;	/* needed to pass fw pointer */
+
+	/* completion struct for firmware loading */
+	struct completion fw_load_complete;
+
+	/* Devicelist in struct b43legacy_wl (all 802.11 cores) */
+	struct list_head list;
+
+	/* Debugging stuff follows. */
+#ifdef CONFIG_B43LEGACY_DEBUG
+	struct b43legacy_dfsentry *dfsentry;
+#endif
+};
+
+
+static inline
+struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw)
+{
+	return hw->priv;
+}
+
+/* Helper function, which returns a boolean.
+ * TRUE, if PIO is used; FALSE, if DMA is used.
+ */
+#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
+static inline
+int b43legacy_using_pio(struct b43legacy_wldev *dev)
+{
+	return dev->__using_pio;
+}
+#elif defined(CONFIG_B43LEGACY_DMA)
+static inline
+int b43legacy_using_pio(struct b43legacy_wldev *dev)
+{
+	return 0;
+}
+#elif defined(CONFIG_B43LEGACY_PIO)
+static inline
+int b43legacy_using_pio(struct b43legacy_wldev *dev)
+{
+	return 1;
+}
+#else
+# error "Using neither DMA nor PIO? Confused..."
+#endif
+
+
+static inline
+struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev)
+{
+	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+	return ssb_get_drvdata(ssb_dev);
+}
+
+/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
+static inline
+int b43legacy_is_mode(struct b43legacy_wl *wl, int type)
+{
+	return (wl->operating &&
+		wl->if_type == type);
+}
+
+static inline
+bool is_bcm_board_vendor(struct b43legacy_wldev *dev)
+{
+	return  (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM);
+}
+
+static inline
+u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset)
+{
+	return ssb_read16(dev->dev, offset);
+}
+
+static inline
+void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value)
+{
+	ssb_write16(dev->dev, offset, value);
+}
+
+static inline
+u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset)
+{
+	return ssb_read32(dev->dev, offset);
+}
+
+static inline
+void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value)
+{
+	ssb_write32(dev->dev, offset, value);
+}
+
+static inline
+struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy,
+					      u16 radio_attenuation,
+					      u16 baseband_attenuation)
+{
+	return phy->_lo_pairs + (radio_attenuation
+			+ 14 * (baseband_attenuation / 2));
+}
+
+
+
+/* Message printing */
+__printf(2, 3)
+void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...);
+__printf(2, 3)
+void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...);
+__printf(2, 3)
+void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...);
+#if B43legacy_DEBUG
+__printf(2, 3)
+void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...);
+#else /* DEBUG */
+# define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0)
+#endif /* DEBUG */
+
+/* Macros for printing a value in Q5.2 format */
+#define Q52_FMT		"%u.%u"
+#define Q52_ARG(q52)	((q52) / 4), (((q52) & 3) * 100 / 4)
+
+#endif /* B43legacy_H_ */