Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

75 files changed, 17347 insertions, 0 deletions

diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
new file mode 100644
index 000000000..794968bda
--- /dev/null
+++ b/drivers/platform/x86/intel/Kconfig
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+source "drivers/platform/x86/intel/atomisp2/Kconfig"
+source "drivers/platform/x86/intel/ifs/Kconfig"
+source "drivers/platform/x86/intel/int1092/Kconfig"
+source "drivers/platform/x86/intel/int3472/Kconfig"
+source "drivers/platform/x86/intel/pmc/Kconfig"
+source "drivers/platform/x86/intel/pmt/Kconfig"
+source "drivers/platform/x86/intel/speed_select_if/Kconfig"
+source "drivers/platform/x86/intel/telemetry/Kconfig"
+source "drivers/platform/x86/intel/wmi/Kconfig"
+source "drivers/platform/x86/intel/uncore-frequency/Kconfig"
+
+
+config INTEL_HID_EVENT
+	tristate "Intel HID Event"
+	depends on ACPI
+	depends on INPUT
+	depends on I2C
+	select INPUT_SPARSEKMAP
+	help
+	  This driver provides support for the Intel HID Event hotkey interface.
+	  Some laptops require this driver for hotkey support.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_hid.
+
+config INTEL_VBTN
+	tristate "Intel Virtual Button"
+	depends on ACPI
+	depends on INPUT
+	depends on I2C
+	select INPUT_SPARSEKMAP
+	help
+	  This driver provides support for the Intel Virtual Button interface.
+	  Some laptops require this driver for power button support.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_vbtn.
+
+config INTEL_INT0002_VGPIO
+	tristate "Intel ACPI INT0002 Virtual GPIO driver"
+	depends on GPIOLIB && ACPI && PM_SLEEP
+	select GPIOLIB_IRQCHIP
+	help
+	  Some peripherals on Bay Trail and Cherry Trail platforms signal a
+	  Power Management Event (PME) to the Power Management Controller (PMC)
+	  to wakeup the system. When this happens software needs to explicitly
+	  clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
+	  IRQ storm on IRQ 9.
+
+	  This is modelled in ACPI through the INT0002 ACPI device, which is
+	  called a "Virtual GPIO controller" in ACPI because it defines the
+	  event handler to call when the PME triggers through _AEI and _L02
+	  methods as would be done for a real GPIO interrupt in ACPI.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_int0002_vgpio.
+
+config INTEL_OAKTRAIL
+	tristate "Intel Oaktrail Platform Extras"
+	depends on ACPI
+	depends on ACPI_VIDEO || ACPI_VIDEO=n
+	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
+	help
+	  Intel Oaktrail platform need this driver to provide interfaces to
+	  enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
+	  here; it will only load on supported platforms.
+
+config INTEL_BXTWC_PMIC_TMU
+	tristate "Intel Broxton Whiskey Cove TMU Driver"
+	depends on INTEL_SOC_PMIC_BXTWC
+	depends on MFD_INTEL_PMC_BXT
+	select REGMAP
+	help
+	  Select this driver to use Intel Broxton Whiskey Cove PMIC TMU feature.
+	  This driver enables the alarm wakeup functionality in the TMU unit of
+	  Whiskey Cove PMIC.
+
+config INTEL_CHTDC_TI_PWRBTN
+	tristate "Intel Cherry Trail Dollar Cove TI power button driver"
+	depends on INTEL_SOC_PMIC_CHTDC_TI
+	depends on INPUT
+	help
+	  This option adds a power button driver for Dollar Cove TI
+	  PMIC on Intel Cherry Trail devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_chtdc_ti_pwrbtn.
+
+config INTEL_CHTWC_INT33FE
+	tristate "Intel Cherry Trail Whiskey Cove ACPI INT33FE Driver"
+	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
+	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
+	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
+	help
+	  This driver add support for the Intel Cherry Trail Whiskey Cove
+	  INT33FE ACPI device found on the GPD win and the GPD pocket.
+
+	  The INT33FE ACPI device on these mini laptops contains I2cSerialBusV2
+	  resources for a MAX17042 Fuel Gauge, FUSB302 USB Type-C Controller
+	  and PI3USB30532 USB switch.
+	  This driver instantiates i2c-clients for these, so that standard
+	  i2c drivers for these chips can bind to the them.
+
+	  If you enable this driver it is advised to also select
+	  CONFIG_TYPEC_FUSB302=m, CONFIG_TYPEC_MUX_PI3USB30532=m and
+	  CONFIG_BATTERY_MAX17042=m.
+
+config INTEL_ISHTP_ECLITE
+	tristate "Intel ISHTP eclite controller Driver"
+	depends on INTEL_ISH_HID
+	depends on ACPI
+	help
+	  This driver is for accessing the PSE (Programmable Service Engine) -
+	  an Embedded Controller like IP - using ISHTP (Integrated Sensor Hub
+	  Transport Protocol) to get battery, thermal and UCSI (USB Type-C
+	  Connector System Software Interface) related data from the platform.
+	  Users who don't want to use discrete Embedded Controller on Intel's
+	  Elkhartlake platform can leverage this integrated solution of
+	  ECLite which is part of PSE subsystem.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_ishtp_eclite.
+
+config INTEL_MRFLD_PWRBTN
+	tristate "Intel Merrifield Basin Cove power button driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	depends on INPUT
+	help
+	  This option adds a power button driver for Basin Cove PMIC
+	  on Intel Merrifield devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_mrfld_pwrbtn.
+
+config INTEL_PUNIT_IPC
+	tristate "Intel P-Unit IPC Driver"
+	help
+	  This driver provides support for Intel P-Unit Mailbox IPC mechanism,
+	  which is used to bridge the communications between kernel and P-Unit.
+
+config INTEL_RST
+	tristate "Intel Rapid Start Technology Driver"
+	depends on ACPI
+	help
+	  This driver provides support for modifying parameters on systems
+	  equipped with Intel's Rapid Start Technology. When put in an ACPI
+	  sleep state, these devices will wake after either a configured
+	  timeout or when the system battery reaches a critical state,
+	  automatically copying memory contents to disk. On resume, the
+	  firmware will copy the memory contents back to RAM and resume the OS
+	  as usual.
+
+config INTEL_SDSI
+	tristate "Intel Software Defined Silicon Driver"
+	depends on INTEL_VSEC
+	depends on X86_64
+	help
+	  This driver enables access to the Intel Software Defined Silicon
+	  interface used to provision silicon features with an authentication
+	  certificate and capability license.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_sdsi.
+
+config INTEL_SMARTCONNECT
+	tristate "Intel Smart Connect disabling driver"
+	depends on ACPI
+	help
+	  Intel Smart Connect is a technology intended to permit devices to
+	  update state by resuming for a short period of time at regular
+	  intervals. If a user enables this functionality under Windows and
+	  then reboots into Linux, the system may remain configured to resume
+	  on suspend. In the absence of any userspace to support it, the system
+	  will then remain awake until something triggers another suspend.
+
+	  This driver checks to determine whether the device has Intel Smart
+	  Connect enabled, and if so disables it.
+
+config INTEL_TURBO_MAX_3
+	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+	depends on X86_64 && SCHED_MC_PRIO
+	help
+	  This driver reads maximum performance ratio of each CPU and set up
+	  the scheduler priority metrics. In this way scheduler can prefer
+	  CPU with higher performance to schedule tasks.
+
+	  This driver is only required when the system is not using Hardware
+	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
+config INTEL_VSEC
+	tristate "Intel Vendor Specific Extended Capabilities Driver"
+	depends on PCI
+	select AUXILIARY_BUS
+	help
+	  Adds support for feature drivers exposed using Intel PCIe VSEC and
+	  DVSEC.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_vsec.
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
new file mode 100644
index 000000000..717933dd0
--- /dev/null
+++ b/drivers/platform/x86/intel/Makefile
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for drivers/platform/x86/intel
+# Intel x86 Platform-Specific Drivers
+#
+
+obj-$(CONFIG_INTEL_ATOMISP2_PDX86)	+= atomisp2/
+obj-$(CONFIG_INTEL_IFS)			+= ifs/
+obj-$(CONFIG_INTEL_SAR_INT1092)		+= int1092/
+obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
+obj-$(CONFIG_INTEL_PMC_CORE)		+= pmc/
+obj-$(CONFIG_INTEL_PMT_CLASS)		+= pmt/
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += speed_select_if/
+obj-$(CONFIG_INTEL_TELEMETRY)		+= telemetry/
+obj-$(CONFIG_INTEL_WMI)			+= wmi/
+obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)	+= uncore-frequency/
+
+
+# Intel input drivers
+intel-hid-y				:= hid.o
+obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
+intel-vbtn-y				:= vbtn.o
+obj-$(CONFIG_INTEL_VBTN)		+= intel-vbtn.o
+
+# Intel miscellaneous drivers
+obj-$(CONFIG_INTEL_ISHTP_ECLITE)	+= ishtp_eclite.o
+intel_int0002_vgpio-y			:= int0002_vgpio.o
+obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
+intel_oaktrail-y			:= oaktrail.o
+obj-$(CONFIG_INTEL_OAKTRAIL)		+= intel_oaktrail.o
+intel_sdsi-y				:= sdsi.o
+obj-$(CONFIG_INTEL_SDSI)		+= intel_sdsi.o
+intel_vsec-y				:= vsec.o
+obj-$(CONFIG_INTEL_VSEC)		+= intel_vsec.o
+
+# Intel PMIC / PMC / P-Unit drivers
+intel_bxtwc_tmu-y			:= bxtwc_tmu.o
+obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
+intel_crystal_cove_charger-y		:= crystal_cove_charger.o
+obj-$(CONFIG_X86_ANDROID_TABLETS)	+= intel_crystal_cove_charger.o
+intel_chtdc_ti_pwrbtn-y			:= chtdc_ti_pwrbtn.o
+obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
+intel_chtwc_int33fe-y			:= chtwc_int33fe.o
+obj-$(CONFIG_INTEL_CHTWC_INT33FE)	+= intel_chtwc_int33fe.o
+intel_mrfld_pwrbtn-y			:= mrfld_pwrbtn.o
+obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
+intel_punit_ipc-y			:= punit_ipc.o
+obj-$(CONFIG_INTEL_PUNIT_IPC)		+= intel_punit_ipc.o
+
+# Intel Uncore drivers
+intel-rst-y				:= rst.o
+obj-$(CONFIG_INTEL_RST)			+= intel-rst.o
+intel-smartconnect-y			:= smartconnect.o
+obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
+intel_turbo_max_3-y			:= turbo_max_3.o
+obj-$(CONFIG_INTEL_TURBO_MAX_3)		+= intel_turbo_max_3.o
diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig
new file mode 100644
index 000000000..35dd2be9d
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+config INTEL_ATOMISP2_PDX86
+	bool
+
+config INTEL_ATOMISP2_LED
+	tristate "Intel AtomISP v2 camera LED driver"
+	depends on GPIOLIB && LEDS_GPIO
+	select INTEL_ATOMISP2_PDX86
+	help
+	  Many Bay Trail and Cherry Trail devices come with a camera attached
+	  to Intel's Image Signal Processor. Linux currently does not have a
+	  driver for these, so they do not work as a camera. Some of these
+	  camera's have a LED which is controlled through a GPIO.
+
+	  Some of these devices have a firmware issue where the LED gets turned
+	  on at boot. This driver will turn the LED off at boot and also allows
+	  controlling the LED (repurposing it) through the sysfs LED interface.
+
+	  Which GPIO is attached to the LED is usually not described in the
+	  ACPI tables, so this driver contains per-system info about the GPIO
+	  inside the driver, this means that this driver only works on systems
+	  the driver knows about.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+	tristate "Intel AtomISP v2 dummy / power-management driver"
+	depends on PCI && IOSF_MBI && PM
+	depends on !INTEL_ATOMISP
+	select INTEL_ATOMISP2_PDX86
+	help
+	  Power-management driver for Intel's Image Signal Processor found on
+	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+	  is to turn the ISP off (put it in D3) to save power and to allow
+	  entering of S0ix modes.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_pm.
diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile
new file mode 100644
index 000000000..96b1e877d
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+intel_atomisp2_led-y			:= led.o
+obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
+intel_atomisp2_pm-y			+= pm.o
+obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
diff --git a/drivers/platform/x86/intel/atomisp2/led.c b/drivers/platform/x86/intel/atomisp2/led.c
new file mode 100644
index 000000000..10077a61d
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/led.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for controlling LEDs for cameras connected to the Intel atomisp2
+ * The main purpose of this driver is to turn off LEDs which are on at boot.
+ *
+ * Copyright (C) 2020 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+/* This must be leds-gpio as the leds-gpio driver binds to the name */
+#define DEV_NAME		"leds-gpio"
+
+static const struct gpio_led atomisp2_leds[] = {
+	{
+		.name = "atomisp2::camera",
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static const struct gpio_led_platform_data atomisp2_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(atomisp2_leds),
+	.leds		= atomisp2_leds,
+};
+
+static struct gpiod_lookup_table asus_t100ta_lookup = {
+	.dev_id = DEV_NAME,
+	.table = {
+		GPIO_LOOKUP_IDX("INT33FC:02", 8, NULL, 0, GPIO_ACTIVE_HIGH),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table asus_t100chi_lookup = {
+	.dev_id = DEV_NAME,
+	.table = {
+		GPIO_LOOKUP_IDX("INT33FC:01", 24, NULL, 0, GPIO_ACTIVE_HIGH),
+		{ }
+	}
+};
+
+static const struct dmi_system_id atomisp2_led_systems[] __initconst = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			/* Non exact match to also match T100TAF */
+			DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+		},
+		.driver_data = &asus_t100ta_lookup,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+		},
+		.driver_data = &asus_t100ta_lookup,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100CHI"),
+		},
+		.driver_data = &asus_t100chi_lookup,
+	},
+	{} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(dmi, atomisp2_led_systems);
+
+static struct gpiod_lookup_table *gpio_lookup;
+static struct platform_device *pdev;
+
+static int __init atomisp2_led_init(void)
+{
+	const struct dmi_system_id *system;
+
+	system = dmi_first_match(atomisp2_led_systems);
+	if (!system)
+		return -ENODEV;
+
+	gpio_lookup = system->driver_data;
+	gpiod_add_lookup_table(gpio_lookup);
+
+	pdev = platform_device_register_resndata(NULL,
+						 DEV_NAME, PLATFORM_DEVID_NONE,
+						 NULL, 0, &atomisp2_leds_pdata,
+						 sizeof(atomisp2_leds_pdata));
+	if (IS_ERR(pdev))
+		gpiod_remove_lookup_table(gpio_lookup);
+
+	return PTR_ERR_OR_ZERO(pdev);
+}
+
+static void __exit atomisp2_led_cleanup(void)
+{
+	platform_device_unregister(pdev);
+	gpiod_remove_lookup_table(gpio_lookup);
+}
+
+module_init(atomisp2_led_init);
+module_exit(atomisp2_led_cleanup);
+
+/*
+ * The ACPI INIT method from Asus WMI's code on the T100TA and T200TA turns the
+ * LED on (without the WMI interface allowing further control over the LED).
+ * Ensure we are loaded after asus-nb-wmi so that we turn the LED off again.
+ */
+MODULE_SOFTDEP("pre: asus_nb_wmi");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com");
+MODULE_DESCRIPTION("Intel atomisp2 camera LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel/atomisp2/pm.c b/drivers/platform/x86/intel/atomisp2/pm.c
new file mode 100644
index 000000000..805fc0d85
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/pm.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dummy driver for Intel's Image Signal Processor found on Bay Trail
+ * and Cherry Trail devices. The sole purpose of this driver is to allow
+ * the ISP to be put in D3.
+ *
+ * Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches for ISP support:
+ * Copyright (C) 2010-2017 Intel Corporation. All rights reserved.
+ * Copyright (c) 2010 Silicon Hive www.siliconhive.com.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <asm/iosf_mbi.h>
+
+/* PCI configuration regs */
+#define PCI_INTERRUPT_CTRL		0x9c
+
+#define PCI_CSI_CONTROL			0xe8
+#define PCI_CSI_CONTROL_PORTS_OFF_MASK	0x7
+
+/* IOSF BT_MBI_UNIT_PMC regs */
+#define ISPSSPM0			0x39
+#define ISPSSPM0_ISPSSC_OFFSET		0
+#define ISPSSPM0_ISPSSC_MASK		0x00000003
+#define ISPSSPM0_ISPSSS_OFFSET		24
+#define ISPSSPM0_ISPSSS_MASK		0x03000000
+#define ISPSSPM0_IUNIT_POWER_ON		0x0
+#define ISPSSPM0_IUNIT_POWER_OFF	0x3
+
+static int isp_set_power(struct pci_dev *dev, bool enable)
+{
+	unsigned long timeout;
+	u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON : ISPSSPM0_IUNIT_POWER_OFF;
+
+	/* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */
+	iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0,
+			val, ISPSSPM0_ISPSSC_MASK);
+
+	/*
+	 * There should be no IUNIT access while power-down is
+	 * in progress. HW sighting: 4567865.
+	 * Wait up to 50 ms for the IUNIT to shut down.
+	 * And we do the same for power on.
+	 */
+	timeout = jiffies + msecs_to_jiffies(50);
+	do {
+		u32 tmp;
+
+		/* Wait until ISPSSPM0 bit[25:24] shows the right value */
+		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp);
+		tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
+		if (tmp == val)
+			return 0;
+
+		usleep_range(1000, 2000);
+	} while (time_before(jiffies, timeout));
+
+	dev_err(&dev->dev, "IUNIT power-%s timeout.\n", enable ? "on" : "off");
+	return -EBUSY;
+}
+
+static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	pm_runtime_allow(&dev->dev);
+	pm_runtime_put_sync_suspend(&dev->dev);
+
+	return 0;
+}
+
+static void isp_remove(struct pci_dev *dev)
+{
+	pm_runtime_get_sync(&dev->dev);
+	pm_runtime_forbid(&dev->dev);
+}
+
+static int isp_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	u32 val;
+
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, 0);
+
+	/*
+	 * MRFLD IUNIT DPHY is located in an always-power-on island
+	 * MRFLD HW design need all CSI ports are disabled before
+	 * powering down the IUNIT.
+	 */
+	pci_read_config_dword(pdev, PCI_CSI_CONTROL, &val);
+	val |= PCI_CSI_CONTROL_PORTS_OFF_MASK;
+	pci_write_config_dword(pdev, PCI_CSI_CONTROL, val);
+
+	/*
+	 * We lose config space access when punit power gates
+	 * the ISP. Can't use pci_set_power_state() because
+	 * pmcsr won't actually change when we write to it.
+	 */
+	pci_save_state(pdev);
+	pdev->current_state = PCI_D3cold;
+	isp_set_power(pdev, false);
+
+	return 0;
+}
+
+static int isp_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	isp_set_power(pdev, true);
+	pdev->current_state = PCI_D0;
+	pci_restore_state(pdev);
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend,
+			    isp_pci_resume, NULL);
+
+static const struct pci_device_id isp_id_table[] = {
+	{ PCI_VDEVICE(INTEL, 0x0f38), },
+	{ PCI_VDEVICE(INTEL, 0x22b8), },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, isp_id_table);
+
+static struct pci_driver isp_pci_driver = {
+	.name = "intel_atomisp2_pm",
+	.id_table = isp_id_table,
+	.probe = isp_probe,
+	.remove = isp_remove,
+	.driver.pm = &isp_pm_ops,
+};
+
+module_pci_driver(isp_pci_driver);
+
+MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/bxtwc_tmu.c b/drivers/platform/x86/intel/bxtwc_tmu.c
new file mode 100644
index 000000000..7ccf58364
--- /dev/null
+++ b/drivers/platform/x86/intel/bxtwc_tmu.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel BXT Whiskey Cove PMIC TMU driver
+ *
+ * Copyright (C) 2016 Intel Corporation. All rights reserved.
+ *
+ * This driver adds TMU (Time Management Unit) support for Intel BXT platform.
+ * It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove
+ * PMIC.
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+#define BXTWC_TMUIRQ		0x4fb6
+#define BXTWC_MIRQLVL1		0x4e0e
+#define BXTWC_MTMUIRQ_REG	0x4fb7
+#define BXTWC_MIRQLVL1_MTMU	BIT(1)
+#define BXTWC_TMU_WK_ALRM	BIT(1)
+#define BXTWC_TMU_SYS_ALRM	BIT(2)
+#define BXTWC_TMU_ALRM_MASK	(BXTWC_TMU_WK_ALRM | BXTWC_TMU_SYS_ALRM)
+#define BXTWC_TMU_ALRM_IRQ	(BXTWC_TMU_WK_ALRM | BXTWC_TMU_SYS_ALRM)
+
+struct wcove_tmu {
+	int irq;
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+static irqreturn_t bxt_wcove_tmu_irq_handler(int irq, void *data)
+{
+	struct wcove_tmu *wctmu = data;
+	unsigned int tmu_irq;
+
+	/* Read TMU interrupt reg */
+	regmap_read(wctmu->regmap, BXTWC_TMUIRQ, &tmu_irq);
+	if (tmu_irq & BXTWC_TMU_ALRM_IRQ) {
+		/* clear TMU irq */
+		regmap_write(wctmu->regmap, BXTWC_TMUIRQ, tmu_irq);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static int bxt_wcove_tmu_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct regmap_irq_chip_data *regmap_irq_chip;
+	struct wcove_tmu *wctmu;
+	int ret, virq, irq;
+
+	wctmu = devm_kzalloc(&pdev->dev, sizeof(*wctmu), GFP_KERNEL);
+	if (!wctmu)
+		return -ENOMEM;
+
+	wctmu->dev = &pdev->dev;
+	wctmu->regmap = pmic->regmap;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	regmap_irq_chip = pmic->irq_chip_data_tmu;
+	virq = regmap_irq_get_virq(regmap_irq_chip, irq);
+	if (virq < 0) {
+		dev_err(&pdev->dev,
+			"failed to get virtual interrupt=%d\n", irq);
+		return virq;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, virq,
+					NULL, bxt_wcove_tmu_irq_handler,
+					IRQF_ONESHOT, "bxt_wcove_tmu", wctmu);
+	if (ret) {
+		dev_err(&pdev->dev, "request irq failed: %d,virq: %d\n",
+							ret, virq);
+		return ret;
+	}
+	wctmu->irq = virq;
+
+	/* Unmask TMU second level Wake & System alarm */
+	regmap_update_bits(wctmu->regmap, BXTWC_MTMUIRQ_REG,
+				  BXTWC_TMU_ALRM_MASK, 0);
+
+	platform_set_drvdata(pdev, wctmu);
+	return 0;
+}
+
+static int bxt_wcove_tmu_remove(struct platform_device *pdev)
+{
+	struct wcove_tmu *wctmu = platform_get_drvdata(pdev);
+	unsigned int val;
+
+	/* Mask TMU interrupts */
+	regmap_read(wctmu->regmap, BXTWC_MIRQLVL1, &val);
+	regmap_write(wctmu->regmap, BXTWC_MIRQLVL1,
+			val | BXTWC_MIRQLVL1_MTMU);
+	regmap_read(wctmu->regmap, BXTWC_MTMUIRQ_REG, &val);
+	regmap_write(wctmu->regmap, BXTWC_MTMUIRQ_REG,
+			val | BXTWC_TMU_ALRM_MASK);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bxtwc_tmu_suspend(struct device *dev)
+{
+	struct wcove_tmu *wctmu = dev_get_drvdata(dev);
+
+	enable_irq_wake(wctmu->irq);
+	return 0;
+}
+
+static int bxtwc_tmu_resume(struct device *dev)
+{
+	struct wcove_tmu *wctmu = dev_get_drvdata(dev);
+
+	disable_irq_wake(wctmu->irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bxtwc_tmu_pm_ops, bxtwc_tmu_suspend, bxtwc_tmu_resume);
+
+static const struct platform_device_id bxt_wcove_tmu_id_table[] = {
+	{ .name = "bxt_wcove_tmu" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, bxt_wcove_tmu_id_table);
+
+static struct platform_driver bxt_wcove_tmu_driver = {
+	.probe = bxt_wcove_tmu_probe,
+	.remove = bxt_wcove_tmu_remove,
+	.driver = {
+		.name = "bxt_wcove_tmu",
+		.pm     = &bxtwc_tmu_pm_ops,
+	},
+	.id_table = bxt_wcove_tmu_id_table,
+};
+
+module_platform_driver(bxt_wcove_tmu_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Nilesh Bacchewar <nilesh.bacchewar@intel.com>");
+MODULE_DESCRIPTION("BXT Whiskey Cove TMU Driver");
diff --git a/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c
new file mode 100644
index 000000000..9606a994a
--- /dev/null
+++ b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power-button driver for Dollar Cove TI PMIC
+ * Copyright (C) 2014 Intel Corp
+ * Copyright (c) 2017 Takashi Iwai <tiwai@suse.de>
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+#define CHTDC_TI_SIRQ_REG	0x3
+#define SIRQ_PWRBTN_REL		BIT(0)
+
+static irqreturn_t chtdc_ti_pwrbtn_interrupt(int irq, void *dev_id)
+{
+	struct input_dev *input = dev_id;
+	struct device *dev = input->dev.parent;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	int state;
+
+	if (!regmap_read(regmap, CHTDC_TI_SIRQ_REG, &state)) {
+		dev_dbg(dev, "SIRQ_REG=0x%x\n", state);
+		input_report_key(input, KEY_POWER, !(state & SIRQ_PWRBTN_REL));
+		input_sync(input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int chtdc_ti_pwrbtn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct input_dev *input;
+	int irq, err;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+	input->name = pdev->name;
+	input->phys = "power-button/input0";
+	input->id.bustype = BUS_HOST;
+	input_set_capability(input, EV_KEY, KEY_POWER);
+	err = input_register_device(input);
+	if (err)
+		return err;
+
+	dev_set_drvdata(dev, pmic->regmap);
+
+	err = devm_request_threaded_irq(dev, irq, NULL,
+					chtdc_ti_pwrbtn_interrupt,
+					IRQF_ONESHOT, KBUILD_MODNAME, input);
+	if (err)
+		return err;
+
+	device_init_wakeup(dev, true);
+	dev_pm_set_wake_irq(dev, irq);
+	return 0;
+}
+
+static int chtdc_ti_pwrbtn_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+	return 0;
+}
+
+static const struct platform_device_id chtdc_ti_pwrbtn_id_table[] = {
+	{ .name = "chtdc_ti_pwrbtn" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, chtdc_ti_pwrbtn_id_table);
+
+static struct platform_driver chtdc_ti_pwrbtn_driver = {
+	.driver = {
+		.name	= KBUILD_MODNAME,
+	},
+	.probe		= chtdc_ti_pwrbtn_probe,
+	.remove		= chtdc_ti_pwrbtn_remove,
+	.id_table	= chtdc_ti_pwrbtn_id_table,
+};
+module_platform_driver(chtdc_ti_pwrbtn_driver);
+
+MODULE_DESCRIPTION("Power-button driver for Dollar Cove TI PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c
new file mode 100644
index 000000000..2c9a7d52b
--- /dev/null
+++ b/drivers/platform/x86/intel/chtwc_int33fe.c
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Cherry Trail ACPI INT33FE pseudo device driver
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Some Intel Cherry Trail based device which ship with Windows 10, have
+ * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2
+ * resources, for 4 different chips attached to various I²C buses:
+ * 1. The Whiskey Cove PMIC, which is also described by the INT34D3 ACPI device
+ * 2. Maxim MAX17047 Fuel Gauge Controller
+ * 3. FUSB302 USB Type-C Controller
+ * 4. PI3USB30532 USB switch
+ *
+ * So this driver is a stub / pseudo driver whose only purpose is to
+ * instantiate I²C clients for chips 2 - 4, so that standard I²C drivers
+ * for these chips can bind to the them.
+ */
+
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/pd.h>
+
+struct cht_int33fe_data {
+	struct i2c_client *battery_fg;
+	struct i2c_client *fusb302;
+	struct i2c_client *pi3usb30532;
+	struct fwnode_handle *dp;
+};
+
+/*
+ * Grrr, I severely dislike buggy BIOS-es. At least one BIOS enumerates
+ * the max17047 both through the INT33FE ACPI device (it is right there
+ * in the resources table) as well as through a separate MAX17047 device.
+ *
+ * These helpers are used to work around this by checking if an I²C client
+ * for the max17047 has already been registered.
+ */
+static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
+{
+	struct i2c_client **max17047 = data;
+	struct acpi_device *adev;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return 0;
+
+	/* The MAX17047 ACPI node doesn't have an UID, so we don't check that */
+	if (!acpi_dev_hid_uid_match(adev, "MAX17047", NULL))
+		return 0;
+
+	*max17047 = to_i2c_client(dev);
+	return 1;
+}
+
+static const char * const max17047_suppliers[] = { "bq24190-charger" };
+
+static const struct property_entry max17047_properties[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers),
+	{ }
+};
+
+static const struct software_node max17047_node = {
+	.name = "max17047",
+	.properties = max17047_properties,
+};
+
+/*
+ * We are not using inline property here because those are constant,
+ * and we need to adjust this one at runtime to point to real
+ * software node.
+ */
+static struct software_node_ref_args fusb302_mux_refs[] = {
+	{ .node = NULL },
+};
+
+static const struct property_entry fusb302_properties[] = {
+	PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
+	PROPERTY_ENTRY_REF_ARRAY("usb-role-switch", fusb302_mux_refs),
+	{ }
+};
+
+static const struct software_node fusb302_node = {
+	.name = "fusb302",
+	.properties = fusb302_properties,
+};
+
+#define PDO_FIXED_FLAGS \
+	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
+
+static const u32 src_pdo[] = {
+	PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS),
+};
+
+static const u32 snk_pdo[] = {
+	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS),
+	PDO_VAR(5000, 12000, 3000),
+};
+
+static const struct software_node pi3usb30532_node = {
+	.name = "pi3usb30532",
+};
+
+static const struct software_node displayport_node = {
+	.name = "displayport",
+};
+
+static const struct property_entry usb_connector_properties[] = {
+	PROPERTY_ENTRY_STRING("data-role", "dual"),
+	PROPERTY_ENTRY_STRING("power-role", "dual"),
+	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
+	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
+	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
+	PROPERTY_ENTRY_REF("orientation-switch", &pi3usb30532_node),
+	PROPERTY_ENTRY_REF("mode-switch", &pi3usb30532_node),
+	PROPERTY_ENTRY_REF("displayport", &displayport_node),
+	{ }
+};
+
+static const struct software_node usb_connector_node = {
+	.name = "connector",
+	.parent = &fusb302_node,
+	.properties = usb_connector_properties,
+};
+
+static const struct software_node altmodes_node = {
+	.name = "altmodes",
+	.parent = &usb_connector_node,
+};
+
+static const struct property_entry dp_altmode_properties[] = {
+	PROPERTY_ENTRY_U32("svid", 0xff01),
+	PROPERTY_ENTRY_U32("vdo", 0x0c0086),
+	{ }
+};
+
+static const struct software_node dp_altmode_node = {
+	.name = "displayport-altmode",
+	.parent = &altmodes_node,
+	.properties = dp_altmode_properties,
+};
+
+static const struct software_node *node_group[] = {
+	&fusb302_node,
+	&max17047_node,
+	&pi3usb30532_node,
+	&displayport_node,
+	&usb_connector_node,
+	&altmodes_node,
+	&dp_altmode_node,
+	NULL
+};
+
+static int cht_int33fe_setup_dp(struct cht_int33fe_data *data)
+{
+	struct fwnode_handle *fwnode;
+	struct pci_dev *pdev;
+
+	fwnode = software_node_fwnode(&displayport_node);
+	if (!fwnode)
+		return -ENODEV;
+
+	/* First let's find the GPU PCI device */
+	pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, NULL);
+	if (!pdev || pdev->vendor != PCI_VENDOR_ID_INTEL) {
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	/* Then the DP-2 child device node */
+	data->dp = device_get_named_child_node(&pdev->dev, "DD04");
+	pci_dev_put(pdev);
+	if (!data->dp)
+		return -ENODEV;
+
+	fwnode->secondary = ERR_PTR(-ENODEV);
+	data->dp->secondary = fwnode;
+
+	return 0;
+}
+
+static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data)
+{
+	software_node_unregister_node_group(node_group);
+
+	if (fusb302_mux_refs[0].node) {
+		fwnode_handle_put(software_node_fwnode(fusb302_mux_refs[0].node));
+		fusb302_mux_refs[0].node = NULL;
+	}
+
+	if (data->dp) {
+		data->dp->secondary = NULL;
+		fwnode_handle_put(data->dp);
+		data->dp = NULL;
+	}
+}
+
+static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
+{
+	const struct software_node *mux_ref_node;
+	int ret;
+
+	/*
+	 * There is no ACPI device node for the USB role mux, so we need to wait
+	 * until the mux driver has created software node for the mux device.
+	 * It means we depend on the mux driver. This function will return
+	 * -EPROBE_DEFER until the mux device is registered.
+	 */
+	mux_ref_node = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
+	if (!mux_ref_node)
+		return -EPROBE_DEFER;
+
+	/*
+	 * Update node used in "usb-role-switch" property. Note that we
+	 * rely on software_node_register_node_group() to use the original
+	 * instance of properties instead of copying them.
+	 */
+	fusb302_mux_refs[0].node = mux_ref_node;
+
+	ret = software_node_register_node_group(node_group);
+	if (ret)
+		return ret;
+
+	/* The devices that are not created in this driver need extra steps. */
+
+	/*
+	 * The DP connector does have ACPI device node. In this case we can just
+	 * find that ACPI node and assign our node as the secondary node to it.
+	 */
+	ret = cht_int33fe_setup_dp(data);
+	if (ret)
+		goto err_remove_nodes;
+
+	return 0;
+
+err_remove_nodes:
+	cht_int33fe_remove_nodes(data);
+
+	return ret;
+}
+
+static int
+cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
+{
+	struct i2c_client *max17047 = NULL;
+	struct i2c_board_info board_info;
+	struct fwnode_handle *fwnode;
+	int ret;
+
+	fwnode = software_node_fwnode(&max17047_node);
+	if (!fwnode)
+		return -ENODEV;
+
+	i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
+	if (max17047) {
+		/* Pre-existing I²C client for the max17047, add device properties */
+		set_secondary_fwnode(&max17047->dev, fwnode);
+		/* And re-probe to get the new device properties applied */
+		ret = device_reprobe(&max17047->dev);
+		if (ret)
+			dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
+		return 0;
+	}
+
+	memset(&board_info, 0, sizeof(board_info));
+	strscpy(board_info.type, "max17047", I2C_NAME_SIZE);
+	board_info.dev_name = "max17047";
+	board_info.fwnode = fwnode;
+	data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
+
+	return PTR_ERR_OR_ZERO(data->battery_fg);
+}
+
+static const struct dmi_system_id cht_int33fe_typec_ids[] = {
+	{
+		/*
+		 * GPD win / GPD pocket mini laptops
+		 *
+		 * This DMI match may not seem unique, but it is. In the 67000+
+		 * DMI decode dumps from linux-hardware.org only 116 have
+		 * board_vendor set to "AMI Corporation" and of those 116 only
+		 * the GPD win's and pocket's board_name is "Default string".
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+			DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(dmi, cht_int33fe_typec_ids);
+
+static int cht_int33fe_typec_probe(struct platform_device *pdev)
+{
+	struct i2c_board_info board_info;
+	struct device *dev = &pdev->dev;
+	struct cht_int33fe_data *data;
+	struct fwnode_handle *fwnode;
+	struct regulator *regulator;
+	int fusb302_irq;
+	int ret;
+
+	if (!dmi_check_system(cht_int33fe_typec_ids))
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/*
+	 * We expect the WC PMIC to be paired with a TI bq24292i charger-IC.
+	 * We check for the bq24292i vbus regulator here, this has 2 purposes:
+	 * 1) The bq24292i allows charging with up to 12V, setting the fusb302's
+	 *    max-snk voltage to 12V with another charger-IC is not good.
+	 * 2) For the fusb302 driver to get the bq24292i vbus regulator, the
+	 *    regulator-map, which is part of the bq24292i regulator_init_data,
+	 *    must be registered before the fusb302 is instantiated, otherwise
+	 *    it will end up with a dummy-regulator.
+	 * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data
+	 * which is defined in i2c-cht-wc.c from where the bq24292i I²C client
+	 * gets instantiated. We use regulator_get_optional here so that we
+	 * don't end up getting a dummy-regulator ourselves.
+	 */
+	regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus");
+	if (IS_ERR(regulator)) {
+		ret = PTR_ERR(regulator);
+		return (ret == -ENODEV) ? -EPROBE_DEFER : ret;
+	}
+	regulator_put(regulator);
+
+	/* The FUSB302 uses the IRQ at index 1 and is the only IRQ user */
+	fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1);
+	if (fusb302_irq < 0) {
+		if (fusb302_irq != -EPROBE_DEFER)
+			dev_err(dev, "Error getting FUSB302 irq\n");
+		return fusb302_irq;
+	}
+
+	ret = cht_int33fe_add_nodes(data);
+	if (ret)
+		return ret;
+
+	/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047() */
+	ret = cht_int33fe_register_max17047(dev, data);
+	if (ret)
+		goto out_remove_nodes;
+
+	fwnode = software_node_fwnode(&fusb302_node);
+	if (!fwnode) {
+		ret = -ENODEV;
+		goto out_unregister_max17047;
+	}
+
+	memset(&board_info, 0, sizeof(board_info));
+	strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
+	board_info.dev_name = "fusb302";
+	board_info.fwnode = fwnode;
+	board_info.irq = fusb302_irq;
+
+	data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
+	if (IS_ERR(data->fusb302)) {
+		ret = PTR_ERR(data->fusb302);
+		goto out_unregister_max17047;
+	}
+
+	fwnode = software_node_fwnode(&pi3usb30532_node);
+	if (!fwnode) {
+		ret = -ENODEV;
+		goto out_unregister_fusb302;
+	}
+
+	memset(&board_info, 0, sizeof(board_info));
+	board_info.dev_name = "pi3usb30532";
+	board_info.fwnode = fwnode;
+	strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
+
+	data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
+	if (IS_ERR(data->pi3usb30532)) {
+		ret = PTR_ERR(data->pi3usb30532);
+		goto out_unregister_fusb302;
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+
+out_unregister_fusb302:
+	i2c_unregister_device(data->fusb302);
+
+out_unregister_max17047:
+	i2c_unregister_device(data->battery_fg);
+
+out_remove_nodes:
+	cht_int33fe_remove_nodes(data);
+
+	return ret;
+}
+
+static int cht_int33fe_typec_remove(struct platform_device *pdev)
+{
+	struct cht_int33fe_data *data = platform_get_drvdata(pdev);
+
+	i2c_unregister_device(data->pi3usb30532);
+	i2c_unregister_device(data->fusb302);
+	i2c_unregister_device(data->battery_fg);
+
+	cht_int33fe_remove_nodes(data);
+
+	return 0;
+}
+
+static const struct acpi_device_id cht_int33fe_acpi_ids[] = {
+	{ "INT33FE", },
+	{ }
+};
+
+static struct platform_driver cht_int33fe_typec_driver = {
+	.driver	= {
+		.name = "Intel Cherry Trail ACPI INT33FE Type-C driver",
+		.acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids),
+	},
+	.probe = cht_int33fe_typec_probe,
+	.remove = cht_int33fe_typec_remove,
+};
+
+module_platform_driver(cht_int33fe_typec_driver);
+
+MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE Type-C pseudo device driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/crystal_cove_charger.c b/drivers/platform/x86/intel/crystal_cove_charger.c
new file mode 100644
index 000000000..e4299cfa2
--- /dev/null
+++ b/drivers/platform/x86/intel/crystal_cove_charger.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the external-charger IRQ pass-through function of the
+ * Intel Bay Trail Crystal Cove PMIC.
+ *
+ * Note this is NOT a power_supply class driver, it just deals with IRQ
+ * pass-through, this requires a separate driver because the PMIC's
+ * level 2 interrupt for this must be explicitly acked.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define CHGRIRQ_REG					0x0a
+#define MCHGRIRQ_REG					0x17
+
+struct crystal_cove_charger_data {
+	struct mutex buslock; /* irq_bus_lock */
+	struct irq_chip irqchip;
+	struct regmap *regmap;
+	struct irq_domain *irq_domain;
+	int irq;
+	int charger_irq;
+	u8 mask;
+	u8 new_mask;
+};
+
+static irqreturn_t crystal_cove_charger_irq(int irq, void *data)
+{
+	struct crystal_cove_charger_data *charger = data;
+
+	/* No need to read CHGRIRQ_REG as there is only 1 IRQ */
+	handle_nested_irq(charger->charger_irq);
+
+	/* Ack CHGRIRQ 0 */
+	regmap_write(charger->regmap, CHGRIRQ_REG, BIT(0));
+
+	return IRQ_HANDLED;
+}
+
+static void crystal_cove_charger_irq_bus_lock(struct irq_data *data)
+{
+	struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&charger->buslock);
+}
+
+static void crystal_cove_charger_irq_bus_sync_unlock(struct irq_data *data)
+{
+	struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data);
+
+	if (charger->mask != charger->new_mask) {
+		regmap_write(charger->regmap, MCHGRIRQ_REG, charger->new_mask);
+		charger->mask = charger->new_mask;
+	}
+
+	mutex_unlock(&charger->buslock);
+}
+
+static void crystal_cove_charger_irq_unmask(struct irq_data *data)
+{
+	struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data);
+
+	charger->new_mask &= ~BIT(data->hwirq);
+}
+
+static void crystal_cove_charger_irq_mask(struct irq_data *data)
+{
+	struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data);
+
+	charger->new_mask |= BIT(data->hwirq);
+}
+
+static void crystal_cove_charger_rm_irq_domain(void *data)
+{
+	struct crystal_cove_charger_data *charger = data;
+
+	irq_domain_remove(charger->irq_domain);
+}
+
+static int crystal_cove_charger_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct crystal_cove_charger_data *charger;
+	int ret;
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->regmap = pmic->regmap;
+	mutex_init(&charger->buslock);
+
+	charger->irq = platform_get_irq(pdev, 0);
+	if (charger->irq < 0)
+		return charger->irq;
+
+	charger->irq_domain = irq_domain_create_linear(dev_fwnode(pdev->dev.parent), 1,
+						       &irq_domain_simple_ops, NULL);
+	if (!charger->irq_domain)
+		return -ENOMEM;
+
+	/* Distuingish IRQ domain from others sharing (MFD) the same fwnode */
+	irq_domain_update_bus_token(charger->irq_domain, DOMAIN_BUS_WAKEUP);
+
+	ret = devm_add_action_or_reset(&pdev->dev, crystal_cove_charger_rm_irq_domain, charger);
+	if (ret)
+		return ret;
+
+	charger->charger_irq = irq_create_mapping(charger->irq_domain, 0);
+	if (!charger->charger_irq)
+		return -ENOMEM;
+
+	charger->irqchip.name = KBUILD_MODNAME;
+	charger->irqchip.irq_unmask = crystal_cove_charger_irq_unmask;
+	charger->irqchip.irq_mask = crystal_cove_charger_irq_mask;
+	charger->irqchip.irq_bus_lock = crystal_cove_charger_irq_bus_lock;
+	charger->irqchip.irq_bus_sync_unlock = crystal_cove_charger_irq_bus_sync_unlock;
+
+	irq_set_chip_data(charger->charger_irq, charger);
+	irq_set_chip_and_handler(charger->charger_irq, &charger->irqchip, handle_simple_irq);
+	irq_set_nested_thread(charger->charger_irq, true);
+	irq_set_noprobe(charger->charger_irq);
+
+	/* Mask the single 2nd level IRQ before enabling the 1st level IRQ */
+	charger->mask = charger->new_mask = BIT(0);
+	regmap_write(charger->regmap, MCHGRIRQ_REG, charger->mask);
+
+	ret = devm_request_threaded_irq(&pdev->dev, charger->irq, NULL,
+					crystal_cove_charger_irq,
+					IRQF_ONESHOT, KBUILD_MODNAME, charger);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "requesting irq\n");
+
+	return 0;
+}
+
+static struct platform_driver crystal_cove_charger_driver = {
+	.probe = crystal_cove_charger_probe,
+	.driver = {
+		.name = "crystal_cove_charger",
+	},
+};
+module_platform_driver(crystal_cove_charger_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com");
+MODULE_DESCRIPTION("Intel Bay Trail Crystal Cove external charger IRQ pass-through");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c
new file mode 100644
index 000000000..b96ef0eb8
--- /dev/null
+++ b/drivers/platform/x86/intel/hid.c
@@ -0,0 +1,765 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Intel HID event & 5 button array driver
+ *
+ *  Copyright (C) 2015 Alex Hung <alex.hung@canonical.com>
+ *  Copyright (C) 2015 Andrew Lutomirski <luto@kernel.org>
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include "../dual_accel_detect.h"
+
+/* When NOT in tablet mode, VGBS returns with the flag 0x40 */
+#define TABLET_MODE_FLAG BIT(6)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex Hung");
+
+static const struct acpi_device_id intel_hid_ids[] = {
+	{"INT33D5", 0},
+	{"INTC1051", 0},
+	{"INTC1054", 0},
+	{"INTC1070", 0},
+	{"INTC1076", 0},
+	{"INTC1077", 0},
+	{"INTC1078", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, intel_hid_ids);
+
+/* In theory, these are HID usages. */
+static const struct key_entry intel_hid_keymap[] = {
+	/* 1: LSuper (Page 0x07, usage 0xE3) -- unclear what to do */
+	/* 2: Toggle SW_ROTATE_LOCK -- easy to implement if seen in wild */
+	{ KE_KEY, 3, { KEY_NUMLOCK } },
+	{ KE_KEY, 4, { KEY_HOME } },
+	{ KE_KEY, 5, { KEY_END } },
+	{ KE_KEY, 6, { KEY_PAGEUP } },
+	{ KE_KEY, 7, { KEY_PAGEDOWN } },
+	{ KE_KEY, 8, { KEY_RFKILL } },
+	{ KE_KEY, 9, { KEY_POWER } },
+	{ KE_KEY, 11, { KEY_SLEEP } },
+	/* 13 has two different meanings in the spec -- ignore it. */
+	{ KE_KEY, 14, { KEY_STOPCD } },
+	{ KE_KEY, 15, { KEY_PLAYPAUSE } },
+	{ KE_KEY, 16, { KEY_MUTE } },
+	{ KE_KEY, 17, { KEY_VOLUMEUP } },
+	{ KE_KEY, 18, { KEY_VOLUMEDOWN } },
+	{ KE_KEY, 19, { KEY_BRIGHTNESSUP } },
+	{ KE_KEY, 20, { KEY_BRIGHTNESSDOWN } },
+	/* 27: wake -- needs special handling */
+	{ KE_END },
+};
+
+/* 5 button array notification value. */
+static const struct key_entry intel_array_keymap[] = {
+	{ KE_KEY,    0xC2, { KEY_LEFTMETA } },                /* Press */
+	{ KE_IGNORE, 0xC3, { KEY_LEFTMETA } },                /* Release */
+	{ KE_KEY,    0xC4, { KEY_VOLUMEUP } },                /* Press */
+	{ KE_IGNORE, 0xC5, { KEY_VOLUMEUP } },                /* Release */
+	{ KE_KEY,    0xC6, { KEY_VOLUMEDOWN } },              /* Press */
+	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },              /* Release */
+	{ KE_KEY,    0xC8, { KEY_ROTATE_LOCK_TOGGLE } },      /* Press */
+	{ KE_IGNORE, 0xC9, { KEY_ROTATE_LOCK_TOGGLE } },      /* Release */
+	{ KE_KEY,    0xCE, { KEY_POWER } },                   /* Press */
+	{ KE_IGNORE, 0xCF, { KEY_POWER } },                   /* Release */
+	{ KE_END },
+};
+
+static const struct dmi_system_id button_array_table[] = {
+	{
+		.ident = "Wacom MobileStudio Pro 13",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Wacom Co.,Ltd"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Wacom MobileStudio Pro 13"),
+		},
+	},
+	{
+		.ident = "Wacom MobileStudio Pro 16",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Wacom Co.,Ltd"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Wacom MobileStudio Pro 16"),
+		},
+	},
+	{
+		.ident = "HP Spectre x2 (2015)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"),
+		},
+	},
+	{
+		.ident = "Lenovo ThinkPad X1 Tablet Gen 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"),
+		},
+	},
+	{
+		.ident = "Microsoft Surface Go 3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"),
+		},
+	},
+	{ }
+};
+
+/*
+ * Some convertible use the intel-hid ACPI interface to report SW_TABLET_MODE,
+ * these need to be compared via a DMI based authorization list because some
+ * models have unreliable VGBS return which could cause incorrect
+ * SW_TABLET_MODE report.
+ */
+static const struct dmi_system_id dmi_vgbs_allow_list[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible 15-df0xxx"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Elite Dragonfly G2 Notebook PC"),
+		},
+	},
+	{ }
+};
+
+/*
+ * Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE
+ * reports. Accept such reports only from devices in this list.
+ */
+static const struct dmi_system_id dmi_auto_add_switch[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */),
+		},
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */),
+		},
+	},
+	{} /* Array terminator */
+};
+
+struct intel_hid_priv {
+	struct input_dev *input_dev;
+	struct input_dev *array;
+	struct input_dev *switches;
+	bool wakeup_mode;
+	bool auto_add_switch;
+};
+
+#define HID_EVENT_FILTER_UUID	"eeec56b3-4442-408f-a792-4edd4d758054"
+
+enum intel_hid_dsm_fn_codes {
+	INTEL_HID_DSM_FN_INVALID,
+	INTEL_HID_DSM_BTNL_FN,
+	INTEL_HID_DSM_HDMM_FN,
+	INTEL_HID_DSM_HDSM_FN,
+	INTEL_HID_DSM_HDEM_FN,
+	INTEL_HID_DSM_BTNS_FN,
+	INTEL_HID_DSM_BTNE_FN,
+	INTEL_HID_DSM_HEBC_V1_FN,
+	INTEL_HID_DSM_VGBS_FN,
+	INTEL_HID_DSM_HEBC_V2_FN,
+	INTEL_HID_DSM_FN_MAX
+};
+
+static const char *intel_hid_dsm_fn_to_method[INTEL_HID_DSM_FN_MAX] = {
+	NULL,
+	"BTNL",
+	"HDMM",
+	"HDSM",
+	"HDEM",
+	"BTNS",
+	"BTNE",
+	"HEBC",
+	"VGBS",
+	"HEBC"
+};
+
+static unsigned long long intel_hid_dsm_fn_mask;
+static guid_t intel_dsm_guid;
+
+static bool intel_hid_execute_method(acpi_handle handle,
+				     enum intel_hid_dsm_fn_codes fn_index,
+				     unsigned long long arg)
+{
+	union acpi_object *obj, argv4, req;
+	acpi_status status;
+	char *method_name;
+
+	if (fn_index <= INTEL_HID_DSM_FN_INVALID ||
+	    fn_index >= INTEL_HID_DSM_FN_MAX)
+		return false;
+
+	method_name = (char *)intel_hid_dsm_fn_to_method[fn_index];
+
+	if (!(intel_hid_dsm_fn_mask & BIT(fn_index)))
+		goto skip_dsm_exec;
+
+	/* All methods expects a package with one integer element */
+	req.type = ACPI_TYPE_INTEGER;
+	req.integer.value = arg;
+
+	argv4.type = ACPI_TYPE_PACKAGE;
+	argv4.package.count = 1;
+	argv4.package.elements = &req;
+
+	obj = acpi_evaluate_dsm(handle, &intel_dsm_guid, 1, fn_index, &argv4);
+	if (obj) {
+		acpi_handle_debug(handle, "Exec DSM Fn code: %d[%s] success\n",
+				  fn_index, method_name);
+		ACPI_FREE(obj);
+		return true;
+	}
+
+skip_dsm_exec:
+	status = acpi_execute_simple_method(handle, method_name, arg);
+	if (ACPI_SUCCESS(status))
+		return true;
+
+	return false;
+}
+
+static bool intel_hid_evaluate_method(acpi_handle handle,
+				      enum intel_hid_dsm_fn_codes fn_index,
+				      unsigned long long *result)
+{
+	union acpi_object *obj;
+	acpi_status status;
+	char *method_name;
+
+	if (fn_index <= INTEL_HID_DSM_FN_INVALID ||
+	    fn_index >= INTEL_HID_DSM_FN_MAX)
+		return false;
+
+	method_name = (char *)intel_hid_dsm_fn_to_method[fn_index];
+
+	if (!(intel_hid_dsm_fn_mask & BIT(fn_index)))
+		goto skip_dsm_eval;
+
+	obj = acpi_evaluate_dsm_typed(handle, &intel_dsm_guid,
+				      1, fn_index,
+				      NULL,  ACPI_TYPE_INTEGER);
+	if (obj) {
+		*result = obj->integer.value;
+		acpi_handle_debug(handle,
+				  "Eval DSM Fn code: %d[%s] results: 0x%llx\n",
+				  fn_index, method_name, *result);
+		ACPI_FREE(obj);
+		return true;
+	}
+
+skip_dsm_eval:
+	status = acpi_evaluate_integer(handle, method_name, NULL, result);
+	if (ACPI_SUCCESS(status))
+		return true;
+
+	return false;
+}
+
+static void intel_hid_init_dsm(acpi_handle handle)
+{
+	union acpi_object *obj;
+
+	guid_parse(HID_EVENT_FILTER_UUID, &intel_dsm_guid);
+
+	obj = acpi_evaluate_dsm_typed(handle, &intel_dsm_guid, 1, 0, NULL,
+				      ACPI_TYPE_BUFFER);
+	if (obj) {
+		switch (obj->buffer.length) {
+		default:
+		case 2:
+			intel_hid_dsm_fn_mask = *(u16 *)obj->buffer.pointer;
+			break;
+		case 1:
+			intel_hid_dsm_fn_mask = *obj->buffer.pointer;
+			break;
+		case 0:
+			acpi_handle_warn(handle, "intel_hid_dsm_fn_mask length is zero\n");
+			intel_hid_dsm_fn_mask = 0;
+			break;
+		}
+		ACPI_FREE(obj);
+	}
+
+	acpi_handle_debug(handle, "intel_hid_dsm_fn_mask = %llx\n",
+			  intel_hid_dsm_fn_mask);
+}
+
+static int intel_hid_set_enable(struct device *device, bool enable)
+{
+	acpi_handle handle = ACPI_HANDLE(device);
+
+	/* Enable|disable features - power button is always enabled */
+	if (!intel_hid_execute_method(handle, INTEL_HID_DSM_HDSM_FN,
+				      enable)) {
+		dev_warn(device, "failed to %sable hotkeys\n",
+			 enable ? "en" : "dis");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void intel_button_array_enable(struct device *device, bool enable)
+{
+	struct intel_hid_priv *priv = dev_get_drvdata(device);
+	acpi_handle handle = ACPI_HANDLE(device);
+	unsigned long long button_cap;
+	acpi_status status;
+
+	if (!priv->array)
+		return;
+
+	/* Query supported platform features */
+	status = acpi_evaluate_integer(handle, "BTNC", NULL, &button_cap);
+	if (ACPI_FAILURE(status)) {
+		dev_warn(device, "failed to get button capability\n");
+		return;
+	}
+
+	/* Enable|disable features - power button is always enabled */
+	if (!intel_hid_execute_method(handle, INTEL_HID_DSM_BTNE_FN,
+				      enable ? button_cap : 1))
+		dev_warn(device, "failed to set button capability\n");
+}
+
+static int intel_hid_pm_prepare(struct device *device)
+{
+	if (device_may_wakeup(device)) {
+		struct intel_hid_priv *priv = dev_get_drvdata(device);
+
+		priv->wakeup_mode = true;
+	}
+	return 0;
+}
+
+static void intel_hid_pm_complete(struct device *device)
+{
+	struct intel_hid_priv *priv = dev_get_drvdata(device);
+
+	priv->wakeup_mode = false;
+}
+
+static int intel_hid_pl_suspend_handler(struct device *device)
+{
+	intel_button_array_enable(device, false);
+
+	if (!pm_suspend_no_platform())
+		intel_hid_set_enable(device, false);
+
+	return 0;
+}
+
+static int intel_hid_pl_resume_handler(struct device *device)
+{
+	intel_hid_pm_complete(device);
+
+	if (!pm_suspend_no_platform())
+		intel_hid_set_enable(device, true);
+
+	intel_button_array_enable(device, true);
+	return 0;
+}
+
+static const struct dev_pm_ops intel_hid_pl_pm_ops = {
+	.prepare = intel_hid_pm_prepare,
+	.complete = intel_hid_pm_complete,
+	.freeze  = intel_hid_pl_suspend_handler,
+	.thaw  = intel_hid_pl_resume_handler,
+	.restore  = intel_hid_pl_resume_handler,
+	.suspend  = intel_hid_pl_suspend_handler,
+	.resume  = intel_hid_pl_resume_handler,
+};
+
+static int intel_hid_input_setup(struct platform_device *device)
+{
+	struct intel_hid_priv *priv = dev_get_drvdata(&device->dev);
+	int ret;
+
+	priv->input_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->input_dev)
+		return -ENOMEM;
+
+	ret = sparse_keymap_setup(priv->input_dev, intel_hid_keymap, NULL);
+	if (ret)
+		return ret;
+
+	priv->input_dev->name = "Intel HID events";
+	priv->input_dev->id.bustype = BUS_HOST;
+
+	return input_register_device(priv->input_dev);
+}
+
+static int intel_button_array_input_setup(struct platform_device *device)
+{
+	struct intel_hid_priv *priv = dev_get_drvdata(&device->dev);
+	int ret;
+
+	/* Setup input device for 5 button array */
+	priv->array = devm_input_allocate_device(&device->dev);
+	if (!priv->array)
+		return -ENOMEM;
+
+	ret = sparse_keymap_setup(priv->array, intel_array_keymap, NULL);
+	if (ret)
+		return ret;
+
+	priv->array->name = "Intel HID 5 button array";
+	priv->array->id.bustype = BUS_HOST;
+
+	return input_register_device(priv->array);
+}
+
+static int intel_hid_switches_setup(struct platform_device *device)
+{
+	struct intel_hid_priv *priv = dev_get_drvdata(&device->dev);
+
+	/* Setup input device for switches */
+	priv->switches = devm_input_allocate_device(&device->dev);
+	if (!priv->switches)
+		return -ENOMEM;
+
+	__set_bit(EV_SW, priv->switches->evbit);
+	__set_bit(SW_TABLET_MODE, priv->switches->swbit);
+
+	priv->switches->name = "Intel HID switches";
+	priv->switches->id.bustype = BUS_HOST;
+	return input_register_device(priv->switches);
+}
+
+static void report_tablet_mode_state(struct platform_device *device)
+{
+	struct intel_hid_priv *priv = dev_get_drvdata(&device->dev);
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+	unsigned long long vgbs;
+	int m;
+
+	if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_VGBS_FN, &vgbs))
+		return;
+
+	m = !(vgbs & TABLET_MODE_FLAG);
+	input_report_switch(priv->switches, SW_TABLET_MODE, m);
+	input_sync(priv->switches);
+}
+
+static bool report_tablet_mode_event(struct input_dev *input_dev, u32 event)
+{
+	if (!input_dev)
+		return false;
+
+	switch (event) {
+	case 0xcc:
+		input_report_switch(input_dev, SW_TABLET_MODE, 1);
+		input_sync(input_dev);
+		return true;
+	case 0xcd:
+		input_report_switch(input_dev, SW_TABLET_MODE, 0);
+		input_sync(input_dev);
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void notify_handler(acpi_handle handle, u32 event, void *context)
+{
+	struct platform_device *device = context;
+	struct intel_hid_priv *priv = dev_get_drvdata(&device->dev);
+	unsigned long long ev_index;
+	int err;
+
+	/*
+	 * Some convertible have unreliable VGBS return which could cause incorrect
+	 * SW_TABLET_MODE report, in these cases we enable support when receiving
+	 * the first event instead of during driver setup.
+	 */
+	if (!priv->switches && priv->auto_add_switch && (event == 0xcc || event == 0xcd)) {
+		dev_info(&device->dev, "switch event received, enable switches supports\n");
+		err = intel_hid_switches_setup(device);
+		if (err)
+			pr_err("Failed to setup Intel HID switches\n");
+	}
+
+	if (priv->wakeup_mode) {
+		/*
+		 * Needed for wakeup from suspend-to-idle to work on some
+		 * platforms that don't expose the 5-button array, but still
+		 * send notifies with the power button event code to this
+		 * device object on power button actions while suspended.
+		 */
+		if (event == 0xce)
+			goto wakeup;
+
+		/*
+		 * Some devices send (duplicate) tablet-mode events when moved
+		 * around even though the mode has not changed; and they do this
+		 * even when suspended.
+		 * Update the switch state in case it changed and then return
+		 * without waking up to avoid spurious wakeups.
+		 */
+		if (event == 0xcc || event == 0xcd) {
+			report_tablet_mode_event(priv->switches, event);
+			return;
+		}
+
+		/* Wake up on 5-button array events only. */
+		if (event == 0xc0 || !priv->array)
+			return;
+
+		if (!sparse_keymap_entry_from_scancode(priv->array, event)) {
+			dev_info(&device->dev, "unknown event 0x%x\n", event);
+			return;
+		}
+
+wakeup:
+		pm_wakeup_hard_event(&device->dev);
+
+		return;
+	}
+
+	/*
+	 * Needed for suspend to work on some platforms that don't expose
+	 * the 5-button array, but still send notifies with power button
+	 * event code to this device object on power button actions.
+	 *
+	 * Report the power button press and release.
+	 */
+	if (!priv->array) {
+		if (event == 0xce) {
+			input_report_key(priv->input_dev, KEY_POWER, 1);
+			input_sync(priv->input_dev);
+			return;
+		}
+
+		if (event == 0xcf) {
+			input_report_key(priv->input_dev, KEY_POWER, 0);
+			input_sync(priv->input_dev);
+			return;
+		}
+	}
+
+	if (report_tablet_mode_event(priv->switches, event))
+		return;
+
+	/* 0xC0 is for HID events, other values are for 5 button array */
+	if (event != 0xc0) {
+		if (!priv->array ||
+		    !sparse_keymap_report_event(priv->array, event, 1, true))
+			dev_dbg(&device->dev, "unknown event 0x%x\n", event);
+		return;
+	}
+
+	if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_HDEM_FN,
+				       &ev_index)) {
+		dev_warn(&device->dev, "failed to get event index\n");
+		return;
+	}
+
+	if (!sparse_keymap_report_event(priv->input_dev, ev_index, 1, true))
+		dev_dbg(&device->dev, "unknown event index 0x%llx\n",
+			 ev_index);
+}
+
+static bool button_array_present(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+	unsigned long long event_cap;
+
+	if (intel_hid_evaluate_method(handle, INTEL_HID_DSM_HEBC_V2_FN,
+				      &event_cap)) {
+		/* Check presence of 5 button array or v2 power button */
+		if (event_cap & 0x60000)
+			return true;
+	}
+
+	if (intel_hid_evaluate_method(handle, INTEL_HID_DSM_HEBC_V1_FN,
+				      &event_cap)) {
+		if (event_cap & 0x20000)
+			return true;
+	}
+
+	if (dmi_check_system(button_array_table))
+		return true;
+
+	return false;
+}
+
+static int intel_hid_probe(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+	unsigned long long mode, dummy;
+	struct intel_hid_priv *priv;
+	acpi_status status;
+	int err;
+
+	intel_hid_init_dsm(handle);
+
+	if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_HDMM_FN, &mode)) {
+		dev_warn(&device->dev, "failed to read mode\n");
+		return -ENODEV;
+	}
+
+	if (mode != 0) {
+		/*
+		 * This driver only implements "simple" mode.  There appear
+		 * to be no other modes, but we should be paranoid and check
+		 * for compatibility.
+		 */
+		dev_info(&device->dev, "platform is not in simple mode\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(&device->dev, priv);
+
+	/* See dual_accel_detect.h for more info on the dual_accel check. */
+	priv->auto_add_switch = dmi_check_system(dmi_auto_add_switch) && !dual_accel_detect();
+
+	err = intel_hid_input_setup(device);
+	if (err) {
+		pr_err("Failed to setup Intel HID hotkeys\n");
+		return err;
+	}
+
+	/* Setup 5 button array */
+	if (button_array_present(device)) {
+		dev_info(&device->dev, "platform supports 5 button array\n");
+		err = intel_button_array_input_setup(device);
+		if (err)
+			pr_err("Failed to setup Intel 5 button array hotkeys\n");
+	}
+
+	/* Setup switches for devices that we know VGBS return correctly */
+	if (dmi_check_system(dmi_vgbs_allow_list)) {
+		dev_info(&device->dev, "platform supports switches\n");
+		err = intel_hid_switches_setup(device);
+		if (err)
+			pr_err("Failed to setup Intel HID switches\n");
+		else
+			report_tablet_mode_state(device);
+	}
+
+	status = acpi_install_notify_handler(handle,
+					     ACPI_DEVICE_NOTIFY,
+					     notify_handler,
+					     device);
+	if (ACPI_FAILURE(status))
+		return -EBUSY;
+
+	err = intel_hid_set_enable(&device->dev, true);
+	if (err)
+		goto err_remove_notify;
+
+	intel_button_array_enable(&device->dev, true);
+
+	/*
+	 * Call button load method to enable HID power button
+	 * Always do this since it activates events on some devices without
+	 * a button array too.
+	 */
+	if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_BTNL_FN, &dummy))
+		dev_warn(&device->dev, "failed to enable HID power button\n");
+
+	device_init_wakeup(&device->dev, true);
+	/*
+	 * In order for system wakeup to work, the EC GPE has to be marked as
+	 * a wakeup one, so do that here (this setting will persist, but it has
+	 * no effect until the wakeup mask is set for the EC GPE).
+	 */
+	acpi_ec_mark_gpe_for_wake();
+	return 0;
+
+err_remove_notify:
+	acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler);
+
+	return err;
+}
+
+static int intel_hid_remove(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+
+	device_init_wakeup(&device->dev, false);
+	acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler);
+	intel_hid_set_enable(&device->dev, false);
+	intel_button_array_enable(&device->dev, false);
+
+	/*
+	 * Even if we failed to shut off the event stream, we can still
+	 * safely detach from the device.
+	 */
+	return 0;
+}
+
+static struct platform_driver intel_hid_pl_driver = {
+	.driver = {
+		.name = "intel-hid",
+		.acpi_match_table = intel_hid_ids,
+		.pm = &intel_hid_pl_pm_ops,
+	},
+	.probe = intel_hid_probe,
+	.remove = intel_hid_remove,
+};
+
+/*
+ * Unfortunately, some laptops provide a _HID="INT33D5" device with
+ * _CID="PNP0C02".  This causes the pnpacpi scan driver to claim the
+ * ACPI node, so no platform device will be created.  The pnpacpi
+ * driver rejects this device in subsequent processing, so no physical
+ * node is created at all.
+ *
+ * As a workaround until the ACPI core figures out how to handle
+ * this corner case, manually ask the ACPI platform device code to
+ * claim the ACPI node.
+ */
+static acpi_status __init
+check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	const struct acpi_device_id *ids = context;
+	struct acpi_device *dev = acpi_fetch_acpi_dev(handle);
+
+	if (dev && acpi_match_device_ids(dev, ids) == 0)
+		if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL)))
+			dev_info(&dev->dev,
+				 "intel-hid: created platform device\n");
+
+	return AE_OK;
+}
+
+static int __init intel_hid_init(void)
+{
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX, check_acpi_dev, NULL,
+			    (void *)intel_hid_ids, NULL);
+
+	return platform_driver_register(&intel_hid_pl_driver);
+}
+module_init(intel_hid_init);
+
+static void __exit intel_hid_exit(void)
+{
+	platform_driver_unregister(&intel_hid_pl_driver);
+}
+module_exit(intel_hid_exit);
diff --git a/drivers/platform/x86/intel/ifs/Kconfig b/drivers/platform/x86/intel/ifs/Kconfig
new file mode 100644
index 000000000..c341a27cc
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/Kconfig
@@ -0,0 +1,16 @@
+config INTEL_IFS
+	tristate "Intel In Field Scan"
+	depends on X86 && CPU_SUP_INTEL && 64BIT && SMP
+	# Discussion on the list has shown that the sysfs API needs a bit
+	# more work, mark this as broken for now
+	depends on BROKEN
+	select INTEL_IFS_DEVICE
+	help
+	  Enable support for the In Field Scan capability in select
+	  CPUs. The capability allows for running low level tests via
+	  a scan image distributed by Intel via Github to validate CPU
+	  operation beyond baseline RAS capabilities. To compile this
+	  support as a module, choose M here. The module will be called
+	  intel_ifs.
+
+	  If unsure, say N.
diff --git a/drivers/platform/x86/intel/ifs/Makefile b/drivers/platform/x86/intel/ifs/Makefile
new file mode 100644
index 000000000..30f035ef5
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_INTEL_IFS)		+= intel_ifs.o
+
+intel_ifs-objs			:= core.o load.o runtest.o sysfs.o
diff --git a/drivers/platform/x86/intel/ifs/core.c b/drivers/platform/x86/intel/ifs/core.c
new file mode 100644
index 000000000..27204e3d6
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/core.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2022 Intel Corporation. */
+
+#include <linux/module.h>
+#include <linux/kdev_t.h>
+#include <linux/semaphore.h>
+
+#include <asm/cpu_device_id.h>
+
+#include "ifs.h"
+
+#define X86_MATCH(model)				\
+	X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6,	\
+		INTEL_FAM6_##model, X86_FEATURE_CORE_CAPABILITIES, NULL)
+
+static const struct x86_cpu_id ifs_cpu_ids[] __initconst = {
+	X86_MATCH(SAPPHIRERAPIDS_X),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, ifs_cpu_ids);
+
+static struct ifs_device ifs_device = {
+	.data = {
+		.integrity_cap_bit = MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT,
+	},
+	.misc = {
+		.name = "intel_ifs_0",
+		.nodename = "intel_ifs/0",
+		.minor = MISC_DYNAMIC_MINOR,
+	},
+};
+
+static int __init ifs_init(void)
+{
+	const struct x86_cpu_id *m;
+	u64 msrval;
+
+	m = x86_match_cpu(ifs_cpu_ids);
+	if (!m)
+		return -ENODEV;
+
+	if (rdmsrl_safe(MSR_IA32_CORE_CAPS, &msrval))
+		return -ENODEV;
+
+	if (!(msrval & MSR_IA32_CORE_CAPS_INTEGRITY_CAPS))
+		return -ENODEV;
+
+	if (rdmsrl_safe(MSR_INTEGRITY_CAPS, &msrval))
+		return -ENODEV;
+
+	ifs_device.misc.groups = ifs_get_groups();
+
+	if ((msrval & BIT(ifs_device.data.integrity_cap_bit)) &&
+	    !misc_register(&ifs_device.misc)) {
+		down(&ifs_sem);
+		ifs_load_firmware(ifs_device.misc.this_device);
+		up(&ifs_sem);
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static void __exit ifs_exit(void)
+{
+	misc_deregister(&ifs_device.misc);
+}
+
+module_init(ifs_init);
+module_exit(ifs_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Intel In Field Scan (IFS) device");
diff --git a/drivers/platform/x86/intel/ifs/ifs.h b/drivers/platform/x86/intel/ifs/ifs.h
new file mode 100644
index 000000000..73c8e91cf
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/ifs.h
@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2022 Intel Corporation. */
+
+#ifndef _IFS_H_
+#define _IFS_H_
+
+/**
+ * DOC: In-Field Scan
+ *
+ * =============
+ * In-Field Scan
+ * =============
+ *
+ * Introduction
+ * ------------
+ *
+ * In Field Scan (IFS) is a hardware feature to run circuit level tests on
+ * a CPU core to detect problems that are not caught by parity or ECC checks.
+ * Future CPUs will support more than one type of test which will show up
+ * with a new platform-device instance-id, for now only .0 is exposed.
+ *
+ *
+ * IFS Image
+ * ---------
+ *
+ * Intel provides a firmware file containing the scan tests via
+ * github [#f1]_.  Similar to microcode there is a separate file for each
+ * family-model-stepping.
+ *
+ * IFS Image Loading
+ * -----------------
+ *
+ * The driver loads the tests into memory reserved BIOS local to each CPU
+ * socket in a two step process using writes to MSRs to first load the
+ * SHA hashes for the test. Then the tests themselves. Status MSRs provide
+ * feedback on the success/failure of these steps. When a new test file
+ * is installed it can be loaded by writing to the driver reload file::
+ *
+ *   # echo 1 > /sys/devices/virtual/misc/intel_ifs_0/reload
+ *
+ * Similar to microcode, the current version of the scan tests is stored
+ * in a fixed location: /lib/firmware/intel/ifs.0/family-model-stepping.scan
+ *
+ * Running tests
+ * -------------
+ *
+ * Tests are run by the driver synchronizing execution of all threads on a
+ * core and then writing to the ACTIVATE_SCAN MSR on all threads. Instruction
+ * execution continues when:
+ *
+ * 1) All tests have completed.
+ * 2) Execution was interrupted.
+ * 3) A test detected a problem.
+ *
+ * Note that ALL THREADS ON THE CORE ARE EFFECTIVELY OFFLINE FOR THE
+ * DURATION OF THE TEST. This can be up to 200 milliseconds. If the system
+ * is running latency sensitive applications that cannot tolerate an
+ * interruption of this magnitude, the system administrator must arrange
+ * to migrate those applications to other cores before running a core test.
+ * It may also be necessary to redirect interrupts to other CPUs.
+ *
+ * In all cases reading the SCAN_STATUS MSR provides details on what
+ * happened. The driver makes the value of this MSR visible to applications
+ * via the "details" file (see below). Interrupted tests may be restarted.
+ *
+ * The IFS driver provides sysfs interfaces via /sys/devices/virtual/misc/intel_ifs_0/
+ * to control execution:
+ *
+ * Test a specific core::
+ *
+ *   # echo <cpu#> > /sys/devices/virtual/misc/intel_ifs_0/run_test
+ *
+ * when HT is enabled any of the sibling cpu# can be specified to test
+ * its corresponding physical core. Since the tests are per physical core,
+ * the result of testing any thread is same. All siblings must be online
+ * to run a core test. It is only necessary to test one thread.
+ *
+ * For e.g. to test core corresponding to cpu5
+ *
+ *   # echo 5 > /sys/devices/virtual/misc/intel_ifs_0/run_test
+ *
+ * Results of the last test is provided in /sys::
+ *
+ *   $ cat /sys/devices/virtual/misc/intel_ifs_0/status
+ *   pass
+ *
+ * Status can be one of pass, fail, untested
+ *
+ * Additional details of the last test is provided by the details file::
+ *
+ *   $ cat /sys/devices/virtual/misc/intel_ifs_0/details
+ *   0x8081
+ *
+ * The details file reports the hex value of the SCAN_STATUS MSR.
+ * Hardware defined error codes are documented in volume 4 of the Intel
+ * Software Developer's Manual but the error_code field may contain one of
+ * the following driver defined software codes:
+ *
+ * +------+--------------------+
+ * | 0xFD | Software timeout   |
+ * +------+--------------------+
+ * | 0xFE | Partial completion |
+ * +------+--------------------+
+ *
+ * Driver design choices
+ * ---------------------
+ *
+ * 1) The ACTIVATE_SCAN MSR allows for running any consecutive subrange of
+ * available tests. But the driver always tries to run all tests and only
+ * uses the subrange feature to restart an interrupted test.
+ *
+ * 2) Hardware allows for some number of cores to be tested in parallel.
+ * The driver does not make use of this, it only tests one core at a time.
+ *
+ * .. [#f1] https://github.com/intel/TBD
+ */
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+
+#define MSR_COPY_SCAN_HASHES			0x000002c2
+#define MSR_SCAN_HASHES_STATUS			0x000002c3
+#define MSR_AUTHENTICATE_AND_COPY_CHUNK		0x000002c4
+#define MSR_CHUNKS_AUTHENTICATION_STATUS	0x000002c5
+#define MSR_ACTIVATE_SCAN			0x000002c6
+#define MSR_SCAN_STATUS				0x000002c7
+#define SCAN_NOT_TESTED				0
+#define SCAN_TEST_PASS				1
+#define SCAN_TEST_FAIL				2
+
+/* MSR_SCAN_HASHES_STATUS bit fields */
+union ifs_scan_hashes_status {
+	u64	data;
+	struct {
+		u32	chunk_size	:16;
+		u32	num_chunks	:8;
+		u32	rsvd1		:8;
+		u32	error_code	:8;
+		u32	rsvd2		:11;
+		u32	max_core_limit	:12;
+		u32	valid		:1;
+	};
+};
+
+/* MSR_CHUNKS_AUTH_STATUS bit fields */
+union ifs_chunks_auth_status {
+	u64	data;
+	struct {
+		u32	valid_chunks	:8;
+		u32	total_chunks	:8;
+		u32	rsvd1		:16;
+		u32	error_code	:8;
+		u32	rsvd2		:24;
+	};
+};
+
+/* MSR_ACTIVATE_SCAN bit fields */
+union ifs_scan {
+	u64	data;
+	struct {
+		u32	start	:8;
+		u32	stop	:8;
+		u32	rsvd	:16;
+		u32	delay	:31;
+		u32	sigmce	:1;
+	};
+};
+
+/* MSR_SCAN_STATUS bit fields */
+union ifs_status {
+	u64	data;
+	struct {
+		u32	chunk_num		:8;
+		u32	chunk_stop_index	:8;
+		u32	rsvd1			:16;
+		u32	error_code		:8;
+		u32	rsvd2			:22;
+		u32	control_error		:1;
+		u32	signature_error		:1;
+	};
+};
+
+/*
+ * Driver populated error-codes
+ * 0xFD: Test timed out before completing all the chunks.
+ * 0xFE: not all scan chunks were executed. Maximum forward progress retries exceeded.
+ */
+#define IFS_SW_TIMEOUT				0xFD
+#define IFS_SW_PARTIAL_COMPLETION		0xFE
+
+/**
+ * struct ifs_data - attributes related to intel IFS driver
+ * @integrity_cap_bit: MSR_INTEGRITY_CAPS bit enumerating this test
+ * @loaded_version: stores the currently loaded ifs image version.
+ * @loaded: If a valid test binary has been loaded into the memory
+ * @loading_error: Error occurred on another CPU while loading image
+ * @valid_chunks: number of chunks which could be validated.
+ * @status: it holds simple status pass/fail/untested
+ * @scan_details: opaque scan status code from h/w
+ */
+struct ifs_data {
+	int	integrity_cap_bit;
+	int	loaded_version;
+	bool	loaded;
+	bool	loading_error;
+	int	valid_chunks;
+	int	status;
+	u64	scan_details;
+};
+
+struct ifs_work {
+	struct work_struct w;
+	struct device *dev;
+};
+
+struct ifs_device {
+	struct ifs_data data;
+	struct miscdevice misc;
+};
+
+static inline struct ifs_data *ifs_get_data(struct device *dev)
+{
+	struct miscdevice *m = dev_get_drvdata(dev);
+	struct ifs_device *d = container_of(m, struct ifs_device, misc);
+
+	return &d->data;
+}
+
+void ifs_load_firmware(struct device *dev);
+int do_core_test(int cpu, struct device *dev);
+const struct attribute_group **ifs_get_groups(void);
+
+extern struct semaphore ifs_sem;
+
+#endif
diff --git a/drivers/platform/x86/intel/ifs/load.c b/drivers/platform/x86/intel/ifs/load.c
new file mode 100644
index 000000000..3e52b4eb1
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/load.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2022 Intel Corporation. */
+
+#include <linux/firmware.h>
+#include <asm/cpu.h>
+#include <linux/slab.h>
+#include <asm/microcode_intel.h>
+
+#include "ifs.h"
+
+struct ifs_header {
+	u32 header_ver;
+	u32 blob_revision;
+	u32 date;
+	u32 processor_sig;
+	u32 check_sum;
+	u32 loader_rev;
+	u32 processor_flags;
+	u32 metadata_size;
+	u32 total_size;
+	u32 fusa_info;
+	u64 reserved;
+};
+
+#define IFS_HEADER_SIZE	(sizeof(struct ifs_header))
+static struct ifs_header *ifs_header_ptr;	/* pointer to the ifs image header */
+static u64 ifs_hash_ptr;			/* Address of ifs metadata (hash) */
+static u64 ifs_test_image_ptr;			/* 256B aligned address of test pattern */
+static DECLARE_COMPLETION(ifs_done);
+
+static const char * const scan_hash_status[] = {
+	[0] = "No error reported",
+	[1] = "Attempt to copy scan hashes when copy already in progress",
+	[2] = "Secure Memory not set up correctly",
+	[3] = "FuSaInfo.ProgramID does not match or ff-mm-ss does not match",
+	[4] = "Reserved",
+	[5] = "Integrity check failed",
+	[6] = "Scan reload or test is in progress"
+};
+
+static const char * const scan_authentication_status[] = {
+	[0] = "No error reported",
+	[1] = "Attempt to authenticate a chunk which is already marked as authentic",
+	[2] = "Chunk authentication error. The hash of chunk did not match expected value"
+};
+
+/*
+ * To copy scan hashes and authenticate test chunks, the initiating cpu must point
+ * to the EDX:EAX to the test image in linear address.
+ * Run wrmsr(MSR_COPY_SCAN_HASHES) for scan hash copy and run wrmsr(MSR_AUTHENTICATE_AND_COPY_CHUNK)
+ * for scan hash copy and test chunk authentication.
+ */
+static void copy_hashes_authenticate_chunks(struct work_struct *work)
+{
+	struct ifs_work *local_work = container_of(work, struct ifs_work, w);
+	union ifs_scan_hashes_status hashes_status;
+	union ifs_chunks_auth_status chunk_status;
+	struct device *dev = local_work->dev;
+	int i, num_chunks, chunk_size;
+	struct ifs_data *ifsd;
+	u64 linear_addr, base;
+	u32 err_code;
+
+	ifsd = ifs_get_data(dev);
+	/* run scan hash copy */
+	wrmsrl(MSR_COPY_SCAN_HASHES, ifs_hash_ptr);
+	rdmsrl(MSR_SCAN_HASHES_STATUS, hashes_status.data);
+
+	/* enumerate the scan image information */
+	num_chunks = hashes_status.num_chunks;
+	chunk_size = hashes_status.chunk_size * 1024;
+	err_code = hashes_status.error_code;
+
+	if (!hashes_status.valid) {
+		ifsd->loading_error = true;
+		if (err_code >= ARRAY_SIZE(scan_hash_status)) {
+			dev_err(dev, "invalid error code 0x%x for hash copy\n", err_code);
+			goto done;
+		}
+		dev_err(dev, "Hash copy error : %s", scan_hash_status[err_code]);
+		goto done;
+	}
+
+	/* base linear address to the scan data */
+	base = ifs_test_image_ptr;
+
+	/* scan data authentication and copy chunks to secured memory */
+	for (i = 0; i < num_chunks; i++) {
+		linear_addr = base + i * chunk_size;
+		linear_addr |= i;
+
+		wrmsrl(MSR_AUTHENTICATE_AND_COPY_CHUNK, linear_addr);
+		rdmsrl(MSR_CHUNKS_AUTHENTICATION_STATUS, chunk_status.data);
+
+		ifsd->valid_chunks = chunk_status.valid_chunks;
+		err_code = chunk_status.error_code;
+
+		if (err_code) {
+			ifsd->loading_error = true;
+			if (err_code >= ARRAY_SIZE(scan_authentication_status)) {
+				dev_err(dev,
+					"invalid error code 0x%x for authentication\n", err_code);
+				goto done;
+			}
+			dev_err(dev, "Chunk authentication error %s\n",
+				scan_authentication_status[err_code]);
+			goto done;
+		}
+	}
+done:
+	complete(&ifs_done);
+}
+
+/*
+ * IFS requires scan chunks authenticated per each socket in the platform.
+ * Once the test chunk is authenticated, it is automatically copied to secured memory
+ * and proceed the authentication for the next chunk.
+ */
+static int scan_chunks_sanity_check(struct device *dev)
+{
+	int metadata_size, curr_pkg, cpu, ret = -ENOMEM;
+	struct ifs_data *ifsd = ifs_get_data(dev);
+	bool *package_authenticated;
+	struct ifs_work local_work;
+	char *test_ptr;
+
+	package_authenticated = kcalloc(topology_max_packages(), sizeof(bool), GFP_KERNEL);
+	if (!package_authenticated)
+		return ret;
+
+	metadata_size = ifs_header_ptr->metadata_size;
+
+	/* Spec says that if the Meta Data Size = 0 then it should be treated as 2000 */
+	if (metadata_size == 0)
+		metadata_size = 2000;
+
+	/* Scan chunk start must be 256 byte aligned */
+	if ((metadata_size + IFS_HEADER_SIZE) % 256) {
+		dev_err(dev, "Scan pattern offset within the binary is not 256 byte aligned\n");
+		return -EINVAL;
+	}
+
+	test_ptr = (char *)ifs_header_ptr + IFS_HEADER_SIZE + metadata_size;
+	ifsd->loading_error = false;
+
+	ifs_test_image_ptr = (u64)test_ptr;
+	ifsd->loaded_version = ifs_header_ptr->blob_revision;
+
+	/* copy the scan hash and authenticate per package */
+	cpus_read_lock();
+	for_each_online_cpu(cpu) {
+		curr_pkg = topology_physical_package_id(cpu);
+		if (package_authenticated[curr_pkg])
+			continue;
+		reinit_completion(&ifs_done);
+		local_work.dev = dev;
+		INIT_WORK_ONSTACK(&local_work.w, copy_hashes_authenticate_chunks);
+		schedule_work_on(cpu, &local_work.w);
+		wait_for_completion(&ifs_done);
+		if (ifsd->loading_error)
+			goto out;
+		package_authenticated[curr_pkg] = 1;
+	}
+	ret = 0;
+out:
+	cpus_read_unlock();
+	kfree(package_authenticated);
+
+	return ret;
+}
+
+static int ifs_sanity_check(struct device *dev,
+			    const struct microcode_header_intel *mc_header)
+{
+	unsigned long total_size, data_size;
+	u32 sum, *mc;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+
+	if ((data_size + MC_HEADER_SIZE > total_size) || (total_size % sizeof(u32))) {
+		dev_err(dev, "bad ifs data file size.\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		dev_err(dev, "invalid/unknown ifs update format.\n");
+		return -EINVAL;
+	}
+
+	mc = (u32 *)mc_header;
+	sum = 0;
+	for (int i = 0; i < total_size / sizeof(u32); i++)
+		sum += mc[i];
+
+	if (sum) {
+		dev_err(dev, "bad ifs data checksum, aborting.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool find_ifs_matching_signature(struct device *dev, struct ucode_cpu_info *uci,
+					const struct microcode_header_intel *shdr)
+{
+	unsigned int mc_size;
+
+	mc_size = get_totalsize(shdr);
+
+	if (!mc_size || ifs_sanity_check(dev, shdr) < 0) {
+		dev_err(dev, "ifs sanity check failure\n");
+		return false;
+	}
+
+	if (!intel_cpu_signatures_match(uci->cpu_sig.sig, uci->cpu_sig.pf, shdr->sig, shdr->pf)) {
+		dev_err(dev, "ifs signature, pf not matching\n");
+		return false;
+	}
+
+	return true;
+}
+
+static bool ifs_image_sanity_check(struct device *dev, const struct microcode_header_intel *data)
+{
+	struct ucode_cpu_info uci;
+
+	intel_cpu_collect_info(&uci);
+
+	return find_ifs_matching_signature(dev, &uci, data);
+}
+
+/*
+ * Load ifs image. Before loading ifs module, the ifs image must be located
+ * in /lib/firmware/intel/ifs and named as {family/model/stepping}.{testname}.
+ */
+void ifs_load_firmware(struct device *dev)
+{
+	struct ifs_data *ifsd = ifs_get_data(dev);
+	const struct firmware *fw;
+	char scan_path[32];
+	int ret;
+
+	snprintf(scan_path, sizeof(scan_path), "intel/ifs/%02x-%02x-%02x.scan",
+		 boot_cpu_data.x86, boot_cpu_data.x86_model, boot_cpu_data.x86_stepping);
+
+	ret = request_firmware_direct(&fw, scan_path, dev);
+	if (ret) {
+		dev_err(dev, "ifs file %s load failed\n", scan_path);
+		goto done;
+	}
+
+	if (!ifs_image_sanity_check(dev, (struct microcode_header_intel *)fw->data)) {
+		dev_err(dev, "ifs header sanity check failed\n");
+		goto release;
+	}
+
+	ifs_header_ptr = (struct ifs_header *)fw->data;
+	ifs_hash_ptr = (u64)(ifs_header_ptr + 1);
+
+	ret = scan_chunks_sanity_check(dev);
+release:
+	release_firmware(fw);
+done:
+	ifsd->loaded = (ret == 0);
+}
diff --git a/drivers/platform/x86/intel/ifs/runtest.c b/drivers/platform/x86/intel/ifs/runtest.c
new file mode 100644
index 000000000..b2ca2bb45
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/runtest.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2022 Intel Corporation. */
+
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/nmi.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+
+#include "ifs.h"
+
+/*
+ * Note all code and data in this file is protected by
+ * ifs_sem. On HT systems all threads on a core will
+ * execute together, but only the first thread on the
+ * core will update results of the test.
+ */
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/intel_ifs.h>
+
+/* Max retries on the same chunk */
+#define MAX_IFS_RETRIES  5
+
+/*
+ * Number of TSC cycles that a logical CPU will wait for the other
+ * logical CPU on the core in the WRMSR(ACTIVATE_SCAN).
+ */
+#define IFS_THREAD_WAIT 100000
+
+enum ifs_status_err_code {
+	IFS_NO_ERROR				= 0,
+	IFS_OTHER_THREAD_COULD_NOT_JOIN		= 1,
+	IFS_INTERRUPTED_BEFORE_RENDEZVOUS	= 2,
+	IFS_POWER_MGMT_INADEQUATE_FOR_SCAN	= 3,
+	IFS_INVALID_CHUNK_RANGE			= 4,
+	IFS_MISMATCH_ARGUMENTS_BETWEEN_THREADS	= 5,
+	IFS_CORE_NOT_CAPABLE_CURRENTLY		= 6,
+	IFS_UNASSIGNED_ERROR_CODE		= 7,
+	IFS_EXCEED_NUMBER_OF_THREADS_CONCURRENT	= 8,
+	IFS_INTERRUPTED_DURING_EXECUTION	= 9,
+};
+
+static const char * const scan_test_status[] = {
+	[IFS_NO_ERROR] = "SCAN no error",
+	[IFS_OTHER_THREAD_COULD_NOT_JOIN] = "Other thread could not join.",
+	[IFS_INTERRUPTED_BEFORE_RENDEZVOUS] = "Interrupt occurred prior to SCAN coordination.",
+	[IFS_POWER_MGMT_INADEQUATE_FOR_SCAN] =
+	"Core Abort SCAN Response due to power management condition.",
+	[IFS_INVALID_CHUNK_RANGE] = "Non valid chunks in the range",
+	[IFS_MISMATCH_ARGUMENTS_BETWEEN_THREADS] = "Mismatch in arguments between threads T0/T1.",
+	[IFS_CORE_NOT_CAPABLE_CURRENTLY] = "Core not capable of performing SCAN currently",
+	[IFS_UNASSIGNED_ERROR_CODE] = "Unassigned error code 0x7",
+	[IFS_EXCEED_NUMBER_OF_THREADS_CONCURRENT] =
+	"Exceeded number of Logical Processors (LP) allowed to run Scan-At-Field concurrently",
+	[IFS_INTERRUPTED_DURING_EXECUTION] = "Interrupt occurred prior to SCAN start",
+};
+
+static void message_not_tested(struct device *dev, int cpu, union ifs_status status)
+{
+	if (status.error_code < ARRAY_SIZE(scan_test_status)) {
+		dev_info(dev, "CPU(s) %*pbl: SCAN operation did not start. %s\n",
+			 cpumask_pr_args(cpu_smt_mask(cpu)),
+			 scan_test_status[status.error_code]);
+	} else if (status.error_code == IFS_SW_TIMEOUT) {
+		dev_info(dev, "CPU(s) %*pbl: software timeout during scan\n",
+			 cpumask_pr_args(cpu_smt_mask(cpu)));
+	} else if (status.error_code == IFS_SW_PARTIAL_COMPLETION) {
+		dev_info(dev, "CPU(s) %*pbl: %s\n",
+			 cpumask_pr_args(cpu_smt_mask(cpu)),
+			 "Not all scan chunks were executed. Maximum forward progress retries exceeded");
+	} else {
+		dev_info(dev, "CPU(s) %*pbl: SCAN unknown status %llx\n",
+			 cpumask_pr_args(cpu_smt_mask(cpu)), status.data);
+	}
+}
+
+static void message_fail(struct device *dev, int cpu, union ifs_status status)
+{
+	/*
+	 * control_error is set when the microcode runs into a problem
+	 * loading the image from the reserved BIOS memory, or it has
+	 * been corrupted. Reloading the image may fix this issue.
+	 */
+	if (status.control_error) {
+		dev_err(dev, "CPU(s) %*pbl: could not execute from loaded scan image\n",
+			cpumask_pr_args(cpu_smt_mask(cpu)));
+	}
+
+	/*
+	 * signature_error is set when the output from the scan chains does not
+	 * match the expected signature. This might be a transient problem (e.g.
+	 * due to a bit flip from an alpha particle or neutron). If the problem
+	 * repeats on a subsequent test, then it indicates an actual problem in
+	 * the core being tested.
+	 */
+	if (status.signature_error) {
+		dev_err(dev, "CPU(s) %*pbl: test signature incorrect.\n",
+			cpumask_pr_args(cpu_smt_mask(cpu)));
+	}
+}
+
+static bool can_restart(union ifs_status status)
+{
+	enum ifs_status_err_code err_code = status.error_code;
+
+	/* Signature for chunk is bad, or scan test failed */
+	if (status.signature_error || status.control_error)
+		return false;
+
+	switch (err_code) {
+	case IFS_NO_ERROR:
+	case IFS_OTHER_THREAD_COULD_NOT_JOIN:
+	case IFS_INTERRUPTED_BEFORE_RENDEZVOUS:
+	case IFS_POWER_MGMT_INADEQUATE_FOR_SCAN:
+	case IFS_EXCEED_NUMBER_OF_THREADS_CONCURRENT:
+	case IFS_INTERRUPTED_DURING_EXECUTION:
+		return true;
+	case IFS_INVALID_CHUNK_RANGE:
+	case IFS_MISMATCH_ARGUMENTS_BETWEEN_THREADS:
+	case IFS_CORE_NOT_CAPABLE_CURRENTLY:
+	case IFS_UNASSIGNED_ERROR_CODE:
+		break;
+	}
+	return false;
+}
+
+/*
+ * Execute the scan. Called "simultaneously" on all threads of a core
+ * at high priority using the stop_cpus mechanism.
+ */
+static int doscan(void *data)
+{
+	int cpu = smp_processor_id();
+	u64 *msrs = data;
+	int first;
+
+	/* Only the first logical CPU on a core reports result */
+	first = cpumask_first(cpu_smt_mask(cpu));
+
+	/*
+	 * This WRMSR will wait for other HT threads to also write
+	 * to this MSR (at most for activate.delay cycles). Then it
+	 * starts scan of each requested chunk. The core scan happens
+	 * during the "execution" of the WRMSR. This instruction can
+	 * take up to 200 milliseconds (in the case where all chunks
+	 * are processed in a single pass) before it retires.
+	 */
+	wrmsrl(MSR_ACTIVATE_SCAN, msrs[0]);
+
+	if (cpu == first) {
+		/* Pass back the result of the scan */
+		rdmsrl(MSR_SCAN_STATUS, msrs[1]);
+	}
+
+	return 0;
+}
+
+/*
+ * Use stop_core_cpuslocked() to synchronize writing to MSR_ACTIVATE_SCAN
+ * on all threads of the core to be tested. Loop if necessary to complete
+ * run of all chunks. Include some defensive tests to make sure forward
+ * progress is made, and that the whole test completes in a reasonable time.
+ */
+static void ifs_test_core(int cpu, struct device *dev)
+{
+	union ifs_scan activate;
+	union ifs_status status;
+	unsigned long timeout;
+	struct ifs_data *ifsd;
+	u64 msrvals[2];
+	int retries;
+
+	ifsd = ifs_get_data(dev);
+
+	activate.rsvd = 0;
+	activate.delay = IFS_THREAD_WAIT;
+	activate.sigmce = 0;
+	activate.start = 0;
+	activate.stop = ifsd->valid_chunks - 1;
+
+	timeout = jiffies + HZ / 2;
+	retries = MAX_IFS_RETRIES;
+
+	while (activate.start <= activate.stop) {
+		if (time_after(jiffies, timeout)) {
+			status.error_code = IFS_SW_TIMEOUT;
+			break;
+		}
+
+		msrvals[0] = activate.data;
+		stop_core_cpuslocked(cpu, doscan, msrvals);
+
+		status.data = msrvals[1];
+
+		trace_ifs_status(cpu, activate, status);
+
+		/* Some cases can be retried, give up for others */
+		if (!can_restart(status))
+			break;
+
+		if (status.chunk_num == activate.start) {
+			/* Check for forward progress */
+			if (--retries == 0) {
+				if (status.error_code == IFS_NO_ERROR)
+					status.error_code = IFS_SW_PARTIAL_COMPLETION;
+				break;
+			}
+		} else {
+			retries = MAX_IFS_RETRIES;
+			activate.start = status.chunk_num;
+		}
+	}
+
+	/* Update status for this core */
+	ifsd->scan_details = status.data;
+
+	if (status.control_error || status.signature_error) {
+		ifsd->status = SCAN_TEST_FAIL;
+		message_fail(dev, cpu, status);
+	} else if (status.error_code) {
+		ifsd->status = SCAN_NOT_TESTED;
+		message_not_tested(dev, cpu, status);
+	} else {
+		ifsd->status = SCAN_TEST_PASS;
+	}
+}
+
+/*
+ * Initiate per core test. It wakes up work queue threads on the target cpu and
+ * its sibling cpu. Once all sibling threads wake up, the scan test gets executed and
+ * wait for all sibling threads to finish the scan test.
+ */
+int do_core_test(int cpu, struct device *dev)
+{
+	int ret = 0;
+
+	/* Prevent CPUs from being taken offline during the scan test */
+	cpus_read_lock();
+
+	if (!cpu_online(cpu)) {
+		dev_info(dev, "cannot test on the offline cpu %d\n", cpu);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ifs_test_core(cpu, dev);
+out:
+	cpus_read_unlock();
+	return ret;
+}
diff --git a/drivers/platform/x86/intel/ifs/sysfs.c b/drivers/platform/x86/intel/ifs/sysfs.c
new file mode 100644
index 000000000..37d8380d6
--- /dev/null
+++ b/drivers/platform/x86/intel/ifs/sysfs.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2022 Intel Corporation. */
+
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/semaphore.h>
+#include <linux/slab.h>
+
+#include "ifs.h"
+
+/*
+ * Protects against simultaneous tests on multiple cores, or
+ * reloading can file while a test is in progress
+ */
+DEFINE_SEMAPHORE(ifs_sem);
+
+/*
+ * The sysfs interface to check additional details of last test
+ * cat /sys/devices/system/platform/ifs/details
+ */
+static ssize_t details_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct ifs_data *ifsd = ifs_get_data(dev);
+
+	return sysfs_emit(buf, "%#llx\n", ifsd->scan_details);
+}
+
+static DEVICE_ATTR_RO(details);
+
+static const char * const status_msg[] = {
+	[SCAN_NOT_TESTED] = "untested",
+	[SCAN_TEST_PASS] = "pass",
+	[SCAN_TEST_FAIL] = "fail"
+};
+
+/*
+ * The sysfs interface to check the test status:
+ * To check the status of last test
+ * cat /sys/devices/platform/ifs/status
+ */
+static ssize_t status_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct ifs_data *ifsd = ifs_get_data(dev);
+
+	return sysfs_emit(buf, "%s\n", status_msg[ifsd->status]);
+}
+
+static DEVICE_ATTR_RO(status);
+
+/*
+ * The sysfs interface for single core testing
+ * To start test, for example, cpu5
+ * echo 5 > /sys/devices/platform/ifs/run_test
+ * To check the result:
+ * cat /sys/devices/platform/ifs/result
+ * The sibling core gets tested at the same time.
+ */
+static ssize_t run_test_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct ifs_data *ifsd = ifs_get_data(dev);
+	unsigned int cpu;
+	int rc;
+
+	rc = kstrtouint(buf, 0, &cpu);
+	if (rc < 0 || cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	if (down_interruptible(&ifs_sem))
+		return -EINTR;
+
+	if (!ifsd->loaded)
+		rc = -EPERM;
+	else
+		rc = do_core_test(cpu, dev);
+
+	up(&ifs_sem);
+
+	return rc ? rc : count;
+}
+
+static DEVICE_ATTR_WO(run_test);
+
+/*
+ * Reload the IFS image. When user wants to install new IFS image
+ */
+static ssize_t reload_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct ifs_data *ifsd = ifs_get_data(dev);
+	bool res;
+
+
+	if (kstrtobool(buf, &res))
+		return -EINVAL;
+	if (!res)
+		return count;
+
+	if (down_interruptible(&ifs_sem))
+		return -EINTR;
+
+	ifs_load_firmware(dev);
+
+	up(&ifs_sem);
+
+	return ifsd->loaded ? count : -ENODEV;
+}
+
+static DEVICE_ATTR_WO(reload);
+
+/*
+ * Display currently loaded IFS image version.
+ */
+static ssize_t image_version_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct ifs_data *ifsd = ifs_get_data(dev);
+
+	if (!ifsd->loaded)
+		return sysfs_emit(buf, "%s\n", "none");
+	else
+		return sysfs_emit(buf, "%#x\n", ifsd->loaded_version);
+}
+
+static DEVICE_ATTR_RO(image_version);
+
+/* global scan sysfs attributes */
+static struct attribute *plat_ifs_attrs[] = {
+	&dev_attr_details.attr,
+	&dev_attr_status.attr,
+	&dev_attr_run_test.attr,
+	&dev_attr_reload.attr,
+	&dev_attr_image_version.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(plat_ifs);
+
+const struct attribute_group **ifs_get_groups(void)
+{
+	return plat_ifs_groups;
+}
diff --git a/drivers/platform/x86/intel/int0002_vgpio.c b/drivers/platform/x86/intel/int0002_vgpio.c
new file mode 100644
index 000000000..97cfbc520
--- /dev/null
+++ b/drivers/platform/x86/intel/int0002_vgpio.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel INT0002 "Virtual GPIO" driver
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Loosely based on android x86 kernel code which is:
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * Author: Dyut Kumar Sil <dyut.k.sil@intel.com>
+ *
+ * Some peripherals on Bay Trail and Cherry Trail platforms signal a Power
+ * Management Event (PME) to the Power Management Controller (PMC) to wakeup
+ * the system. When this happens software needs to clear the PME bus 0 status
+ * bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9.
+ *
+ * This is modelled in ACPI through the INT0002 ACPI device, which is
+ * called a "Virtual GPIO controller" in ACPI because it defines the event
+ * handler to call when the PME triggers through _AEI and _L02 / _E02
+ * methods as would be done for a real GPIO interrupt in ACPI. Note this
+ * is a hack to define an AML event handler for the PME while using existing
+ * ACPI mechanisms, this is not a real GPIO at all.
+ *
+ * This driver will bind to the INT0002 device, and register as a GPIO
+ * controller, letting gpiolib-acpi.c call the _L02 handler as it would
+ * for a real GPIO controller.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/x86/soc.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+
+#define DRV_NAME			"INT0002 Virtual GPIO"
+
+/* For some reason the virtual GPIO pin tied to the GPE is numbered pin 2 */
+#define GPE0A_PME_B0_VIRT_GPIO_PIN	2
+
+#define GPE0A_PME_B0_STS_BIT		BIT(13)
+#define GPE0A_PME_B0_EN_BIT		BIT(13)
+#define GPE0A_STS_PORT			0x420
+#define GPE0A_EN_PORT			0x428
+
+struct int0002_data {
+	struct gpio_chip chip;
+	int parent_irq;
+	int wake_enable_count;
+};
+
+/*
+ * As this is not a real GPIO at all, but just a hack to model an event in
+ * ACPI the get / set functions are dummy functions.
+ */
+
+static int int0002_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return 0;
+}
+
+static void int0002_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+}
+
+static int int0002_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned int offset, int value)
+{
+	return 0;
+}
+
+static void int0002_irq_ack(struct irq_data *data)
+{
+	outl(GPE0A_PME_B0_STS_BIT, GPE0A_STS_PORT);
+}
+
+static void int0002_irq_unmask(struct irq_data *data)
+{
+	u32 gpe_en_reg;
+
+	gpe_en_reg = inl(GPE0A_EN_PORT);
+	gpe_en_reg |= GPE0A_PME_B0_EN_BIT;
+	outl(gpe_en_reg, GPE0A_EN_PORT);
+}
+
+static void int0002_irq_mask(struct irq_data *data)
+{
+	u32 gpe_en_reg;
+
+	gpe_en_reg = inl(GPE0A_EN_PORT);
+	gpe_en_reg &= ~GPE0A_PME_B0_EN_BIT;
+	outl(gpe_en_reg, GPE0A_EN_PORT);
+}
+
+static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct int0002_data *int0002 = container_of(chip, struct int0002_data, chip);
+
+	/*
+	 * Applying of the wakeup flag to our parent IRQ is delayed till system
+	 * suspend, because we only want to do this when using s2idle.
+	 */
+	if (on)
+		int0002->wake_enable_count++;
+	else
+		int0002->wake_enable_count--;
+
+	return 0;
+}
+
+static irqreturn_t int0002_irq(int irq, void *data)
+{
+	struct gpio_chip *chip = data;
+	u32 gpe_sts_reg;
+
+	gpe_sts_reg = inl(GPE0A_STS_PORT);
+	if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT))
+		return IRQ_NONE;
+
+	generic_handle_domain_irq_safe(chip->irq.domain, GPE0A_PME_B0_VIRT_GPIO_PIN);
+
+	pm_wakeup_hard_event(chip->parent);
+
+	return IRQ_HANDLED;
+}
+
+static bool int0002_check_wake(void *data)
+{
+	u32 gpe_sts_reg;
+
+	gpe_sts_reg = inl(GPE0A_STS_PORT);
+	return (gpe_sts_reg & GPE0A_PME_B0_STS_BIT);
+}
+
+static struct irq_chip int0002_irqchip = {
+	.name			= DRV_NAME,
+	.irq_ack		= int0002_irq_ack,
+	.irq_mask		= int0002_irq_mask,
+	.irq_unmask		= int0002_irq_unmask,
+	.irq_set_wake		= int0002_irq_set_wake,
+};
+
+static void int0002_init_irq_valid_mask(struct gpio_chip *chip,
+					unsigned long *valid_mask,
+					unsigned int ngpios)
+{
+	bitmap_clear(valid_mask, 0, GPE0A_PME_B0_VIRT_GPIO_PIN);
+}
+
+static int int0002_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct int0002_data *int0002;
+	struct gpio_irq_chip *girq;
+	struct gpio_chip *chip;
+	int irq, ret;
+
+	/* Menlow has a different INT0002 device? <sigh> */
+	if (!soc_intel_is_byt() && !soc_intel_is_cht())
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	int0002 = devm_kzalloc(dev, sizeof(*int0002), GFP_KERNEL);
+	if (!int0002)
+		return -ENOMEM;
+
+	int0002->parent_irq = irq;
+
+	chip = &int0002->chip;
+	chip->label = DRV_NAME;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->get = int0002_gpio_get;
+	chip->set = int0002_gpio_set;
+	chip->direction_input = int0002_gpio_get;
+	chip->direction_output = int0002_gpio_direction_output;
+	chip->base = -1;
+	chip->ngpio = GPE0A_PME_B0_VIRT_GPIO_PIN + 1;
+	chip->irq.init_valid_mask = int0002_init_irq_valid_mask;
+
+	/*
+	 * We directly request the irq here instead of passing a flow-handler
+	 * to gpiochip_set_chained_irqchip, because the irq is shared.
+	 * FIXME: augment this if we managed to pull handling of shared
+	 * IRQs into gpiolib.
+	 */
+	ret = devm_request_irq(dev, irq, int0002_irq,
+			       IRQF_SHARED, "INT0002", chip);
+	if (ret) {
+		dev_err(dev, "Error requesting IRQ %d: %d\n", irq, ret);
+		return ret;
+	}
+
+	girq = &chip->irq;
+	girq->chip = &int0002_irqchip;
+	/* This let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+
+	ret = devm_gpiochip_add_data(dev, chip, NULL);
+	if (ret) {
+		dev_err(dev, "Error adding gpio chip: %d\n", ret);
+		return ret;
+	}
+
+	acpi_register_wakeup_handler(irq, int0002_check_wake, NULL);
+	device_init_wakeup(dev, true);
+	dev_set_drvdata(dev, int0002);
+	return 0;
+}
+
+static int int0002_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, false);
+	acpi_unregister_wakeup_handler(int0002_check_wake, NULL);
+	return 0;
+}
+
+static int int0002_suspend(struct device *dev)
+{
+	struct int0002_data *int0002 = dev_get_drvdata(dev);
+
+	/*
+	 * The INT0002 parent IRQ is often shared with the ACPI GPE IRQ, don't
+	 * muck with it when firmware based suspend is used, otherwise we may
+	 * cause spurious wakeups from firmware managed suspend.
+	 */
+	if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
+		enable_irq_wake(int0002->parent_irq);
+
+	return 0;
+}
+
+static int int0002_resume(struct device *dev)
+{
+	struct int0002_data *int0002 = dev_get_drvdata(dev);
+
+	if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
+		disable_irq_wake(int0002->parent_irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops int0002_pm_ops = {
+	.suspend = int0002_suspend,
+	.resume = int0002_resume,
+};
+
+static const struct acpi_device_id int0002_acpi_ids[] = {
+	{ "INT0002", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, int0002_acpi_ids);
+
+static struct platform_driver int0002_driver = {
+	.driver = {
+		.name			= DRV_NAME,
+		.acpi_match_table	= int0002_acpi_ids,
+		.pm			= &int0002_pm_ops,
+	},
+	.probe	= int0002_probe,
+	.remove	= int0002_remove,
+};
+
+module_platform_driver(int0002_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Intel INT0002 Virtual GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/int1092/Kconfig b/drivers/platform/x86/intel/int1092/Kconfig
new file mode 100644
index 000000000..2e9a17724
--- /dev/null
+++ b/drivers/platform/x86/intel/int1092/Kconfig
@@ -0,0 +1,14 @@
+config INTEL_SAR_INT1092
+	tristate "Intel Specific Absorption Rate Driver"
+	depends on ACPI
+	help
+	  This driver helps to limit the exposure of human body to RF frequency by
+	  providing information to userspace application that will inform the Intel
+	  M.2 modem to regulate the RF power based on SAR data obtained from the
+	  sensors captured in the BIOS. ACPI interface exposes this data from the BIOS
+	  to SAR driver. The front end application in userspace will interact with SAR
+	  driver to obtain information like the device mode, Antenna index, baseband index,
+	  SAR table index and use available communication like MBIM interface to enable
+	  data communication to modem for RF power regulation. Enable this config when
+	  given platform needs to support "Dynamic SAR" configuration for a modem available
+	  on the platform.
diff --git a/drivers/platform/x86/intel/int1092/Makefile b/drivers/platform/x86/intel/int1092/Makefile
new file mode 100644
index 000000000..4ab94e541
--- /dev/null
+++ b/drivers/platform/x86/intel/int1092/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_INTEL_SAR_INT1092)		+= intel_sar.o
diff --git a/drivers/platform/x86/intel/int1092/intel_sar.c b/drivers/platform/x86/intel/int1092/intel_sar.c
new file mode 100644
index 000000000..e03943e63
--- /dev/null
+++ b/drivers/platform/x86/intel/int1092/intel_sar.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/sysfs.h>
+#include "intel_sar.h"
+
+/**
+ * get_int_value: Retrieve integer values from ACPI Object
+ * @obj: acpi_object pointer which has the integer value
+ * @out: output pointer will get integer value
+ *
+ * Function is used to retrieve integer value from acpi object.
+ *
+ * Return:
+ * * 0 on success
+ * * -EIO if there is an issue in acpi_object passed.
+ */
+static int get_int_value(union acpi_object *obj, int *out)
+{
+	if (!obj || obj->type != ACPI_TYPE_INTEGER)
+		return -EIO;
+	*out = (int)obj->integer.value;
+	return 0;
+}
+
+/**
+ * update_sar_data: sar data is updated based on regulatory mode
+ * @context: pointer to driver context structure
+ *
+ * sar_data is updated based on regulatory value
+ * context->reg_value will never exceed MAX_REGULATORY
+ */
+static void update_sar_data(struct wwan_sar_context *context)
+{
+	struct wwan_device_mode_configuration *config =
+		&context->config_data[context->reg_value];
+
+	if (config->device_mode_info &&
+	    context->sar_data.device_mode < config->total_dev_mode) {
+		int itr = 0;
+
+		for (itr = 0; itr < config->total_dev_mode; itr++) {
+			if (context->sar_data.device_mode ==
+				config->device_mode_info[itr].device_mode) {
+				struct wwan_device_mode_info *dev_mode =
+				&config->device_mode_info[itr];
+
+				context->sar_data.antennatable_index = dev_mode->antennatable_index;
+				context->sar_data.bandtable_index = dev_mode->bandtable_index;
+				context->sar_data.sartable_index = dev_mode->sartable_index;
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * parse_package: parse acpi package for retrieving SAR information
+ * @context: pointer to driver context structure
+ * @item : acpi_object pointer
+ *
+ * Given acpi_object is iterated to retrieve information for each device mode.
+ * If a given package corresponding to a specific device mode is faulty, it is
+ * skipped and the specific entry in context structure will have the default value
+ * of zero. Decoding of subsequent device modes is realized by having "continue"
+ * statements in the for loop on encountering error in parsing given device mode.
+ *
+ * Return:
+ * AE_OK if success
+ * AE_ERROR on error
+ */
+static acpi_status parse_package(struct wwan_sar_context *context, union acpi_object *item)
+{
+	struct wwan_device_mode_configuration *data;
+	int value, itr, reg;
+	union acpi_object *num;
+
+	num = &item->package.elements[0];
+	if (get_int_value(num, &value) || value < 0 || value >= MAX_REGULATORY)
+		return AE_ERROR;
+
+	reg = value;
+
+	data = &context->config_data[reg];
+	if (data->total_dev_mode > MAX_DEV_MODES ||	data->total_dev_mode == 0 ||
+	    item->package.count <= data->total_dev_mode)
+		return AE_ERROR;
+
+	data->device_mode_info = kmalloc_array(data->total_dev_mode,
+					       sizeof(struct wwan_device_mode_info), GFP_KERNEL);
+	if (!data->device_mode_info)
+		return AE_ERROR;
+
+	for (itr = 0; itr < data->total_dev_mode; itr++) {
+		struct wwan_device_mode_info temp = { 0 };
+
+		num = &item->package.elements[itr + 1];
+		if (num->type != ACPI_TYPE_PACKAGE || num->package.count < TOTAL_DATA)
+			continue;
+		if (get_int_value(&num->package.elements[0], &temp.device_mode))
+			continue;
+		if (get_int_value(&num->package.elements[1], &temp.bandtable_index))
+			continue;
+		if (get_int_value(&num->package.elements[2], &temp.antennatable_index))
+			continue;
+		if (get_int_value(&num->package.elements[3], &temp.sartable_index))
+			continue;
+		data->device_mode_info[itr] = temp;
+	}
+	return AE_OK;
+}
+
+/**
+ * sar_get_device_mode: Extraction of information from BIOS via DSM calls
+ * @device: ACPI device for which to retrieve the data
+ *
+ * Retrieve the current device mode information from the BIOS.
+ *
+ * Return:
+ * AE_OK on success
+ * AE_ERROR on error
+ */
+static acpi_status sar_get_device_mode(struct platform_device *device)
+{
+	struct wwan_sar_context *context = dev_get_drvdata(&device->dev);
+	acpi_status status = AE_OK;
+	union acpi_object *out;
+	u32 rev = 0;
+	int value;
+
+	out = acpi_evaluate_dsm(context->handle, &context->guid, rev,
+				COMMAND_ID_DEV_MODE, NULL);
+	if (get_int_value(out, &value)) {
+		dev_err(&device->dev, "DSM cmd:%d Failed to retrieve value\n", COMMAND_ID_DEV_MODE);
+		status = AE_ERROR;
+		goto dev_mode_error;
+	}
+	context->sar_data.device_mode = value;
+	update_sar_data(context);
+	sysfs_notify(&device->dev.kobj, NULL, SYSFS_DATANAME);
+
+dev_mode_error:
+	ACPI_FREE(out);
+	return status;
+}
+
+static const struct acpi_device_id sar_device_ids[] = {
+	{ "INTC1092", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, sar_device_ids);
+
+static ssize_t intc_data_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct wwan_sar_context *context = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d %d %d %d\n", context->sar_data.device_mode,
+		      context->sar_data.bandtable_index,
+		      context->sar_data.antennatable_index,
+		      context->sar_data.sartable_index);
+}
+static DEVICE_ATTR_RO(intc_data);
+
+static ssize_t intc_reg_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct wwan_sar_context *context = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", context->reg_value);
+}
+
+static ssize_t intc_reg_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct wwan_sar_context *context = dev_get_drvdata(dev);
+	unsigned int value;
+	int read;
+
+	if (!count)
+		return -EINVAL;
+	read = kstrtouint(buf, 10, &value);
+	if (read < 0)
+		return read;
+	if (value >= MAX_REGULATORY)
+		return -EOVERFLOW;
+	context->reg_value = value;
+	update_sar_data(context);
+	sysfs_notify(&dev->kobj, NULL, SYSFS_DATANAME);
+	return count;
+}
+static DEVICE_ATTR_RW(intc_reg);
+
+static struct attribute *intcsar_attrs[] = {
+	&dev_attr_intc_data.attr,
+	&dev_attr_intc_reg.attr,
+	NULL
+};
+
+static struct attribute_group intcsar_group = {
+	.attrs = intcsar_attrs,
+};
+
+static void sar_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct platform_device *device = data;
+
+	if (event == SAR_EVENT) {
+		if (sar_get_device_mode(device) != AE_OK)
+			dev_err(&device->dev, "sar_get_device_mode error");
+	}
+}
+
+static void sar_get_data(int reg, struct wwan_sar_context *context)
+{
+	union acpi_object *out, req;
+	u32 rev = 0;
+
+	req.type = ACPI_TYPE_INTEGER;
+	req.integer.value = reg;
+	out = acpi_evaluate_dsm(context->handle, &context->guid, rev,
+				COMMAND_ID_CONFIG_TABLE, &req);
+	if (!out)
+		return;
+	if (out->type == ACPI_TYPE_PACKAGE && out->package.count >= 3 &&
+	    out->package.elements[0].type == ACPI_TYPE_INTEGER &&
+	    out->package.elements[1].type == ACPI_TYPE_INTEGER &&
+	    out->package.elements[2].type == ACPI_TYPE_PACKAGE &&
+	    out->package.elements[2].package.count > 0) {
+		context->config_data[reg].version = out->package.elements[0].integer.value;
+		context->config_data[reg].total_dev_mode =
+			out->package.elements[1].integer.value;
+		if (context->config_data[reg].total_dev_mode <= 0 ||
+		    context->config_data[reg].total_dev_mode > MAX_DEV_MODES) {
+			ACPI_FREE(out);
+			return;
+		}
+		parse_package(context, &out->package.elements[2]);
+	}
+	ACPI_FREE(out);
+}
+
+static int sar_probe(struct platform_device *device)
+{
+	struct wwan_sar_context *context;
+	int reg;
+	int result;
+
+	context = kzalloc(sizeof(*context), GFP_KERNEL);
+	if (!context)
+		return -ENOMEM;
+
+	context->sar_device = device;
+	context->handle = ACPI_HANDLE(&device->dev);
+	dev_set_drvdata(&device->dev, context);
+
+	result = guid_parse(SAR_DSM_UUID, &context->guid);
+	if (result) {
+		dev_err(&device->dev, "SAR UUID parse error: %d\n", result);
+		goto r_free;
+	}
+
+	for (reg = 0; reg < MAX_REGULATORY; reg++)
+		sar_get_data(reg, context);
+
+	if (sar_get_device_mode(device) != AE_OK) {
+		dev_err(&device->dev, "Failed to get device mode\n");
+		result = -EIO;
+		goto r_free;
+	}
+
+	result = sysfs_create_group(&device->dev.kobj, &intcsar_group);
+	if (result) {
+		dev_err(&device->dev, "sysfs creation failed\n");
+		goto r_free;
+	}
+
+	if (acpi_install_notify_handler(ACPI_HANDLE(&device->dev), ACPI_DEVICE_NOTIFY,
+					sar_notify, (void *)device) != AE_OK) {
+		dev_err(&device->dev, "Failed acpi_install_notify_handler\n");
+		result = -EIO;
+		goto r_sys;
+	}
+	return 0;
+
+r_sys:
+	sysfs_remove_group(&device->dev.kobj, &intcsar_group);
+r_free:
+	kfree(context);
+	return result;
+}
+
+static int sar_remove(struct platform_device *device)
+{
+	struct wwan_sar_context *context = dev_get_drvdata(&device->dev);
+	int reg;
+
+	acpi_remove_notify_handler(ACPI_HANDLE(&device->dev),
+				   ACPI_DEVICE_NOTIFY, sar_notify);
+	sysfs_remove_group(&device->dev.kobj, &intcsar_group);
+	for (reg = 0; reg < MAX_REGULATORY; reg++)
+		kfree(context->config_data[reg].device_mode_info);
+
+	kfree(context);
+	return 0;
+}
+
+static struct platform_driver sar_driver = {
+	.probe = sar_probe,
+	.remove = sar_remove,
+	.driver = {
+		.name = DRVNAME,
+		.acpi_match_table = ACPI_PTR(sar_device_ids)
+	}
+};
+module_platform_driver(sar_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Platform device driver for INTEL MODEM BIOS SAR");
+MODULE_AUTHOR("Shravan Sudhakar <s.shravan@intel.com>");
diff --git a/drivers/platform/x86/intel/int1092/intel_sar.h b/drivers/platform/x86/intel/int1092/intel_sar.h
new file mode 100644
index 000000000..b5310510b
--- /dev/null
+++ b/drivers/platform/x86/intel/int1092/intel_sar.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021, Intel Corporation.
+ */
+#ifndef INTEL_SAR_H
+#define INTEL_SAR_H
+
+#define COMMAND_ID_DEV_MODE 1
+#define COMMAND_ID_CONFIG_TABLE 2
+#define DRVNAME "intc_sar"
+#define MAX_DEV_MODES 50
+#define MAX_REGULATORY 3
+#define SAR_DSM_UUID "82737E72-3A33-4C45-A9C7-57C0411A5F13"
+#define SAR_EVENT 0x80
+#define SYSFS_DATANAME "intc_data"
+#define TOTAL_DATA 4
+
+/**
+ * Structure wwan_device_mode_info - device mode information
+ * Holds the data that needs to be passed to userspace.
+ * The data is updated from the BIOS sensor information.
+ * @device_mode: Specific mode of the device
+ * @bandtable_index: Index of RF band
+ * @antennatable_index: Index of antenna
+ * @sartable_index: Index of SAR
+ */
+struct wwan_device_mode_info {
+	int device_mode;
+	int bandtable_index;
+	int antennatable_index;
+	int sartable_index;
+};
+
+/**
+ * Structure wwan_device_mode_configuration - device configuration
+ * Holds the data that is configured and obtained on probe event.
+ * The data is updated from the BIOS sensor information.
+ * @version: Mode configuration version
+ * @total_dev_mode: Total number of device modes
+ * @device_mode_info: pointer to structure wwan_device_mode_info
+ */
+struct wwan_device_mode_configuration {
+	int version;
+	int total_dev_mode;
+	struct wwan_device_mode_info *device_mode_info;
+};
+
+/**
+ * Structure wwan_supported_info - userspace datastore
+ * Holds the data that is obtained from userspace
+ * The data is updated from the userspace and send value back in the
+ * structure format that is mentioned here.
+ * @reg_mode_needed: regulatory mode set by user for tests
+ * @bios_table_revision: Version of SAR table
+ * @num_supported_modes: Total supported modes based on reg_mode
+ */
+struct wwan_supported_info {
+	int reg_mode_needed;
+	int bios_table_revision;
+	int num_supported_modes;
+};
+
+/**
+ * Structure wwan_sar_context - context of SAR
+ * Holds the complete context as long as the driver is in existence
+ * The context holds instance of the data used for different cases.
+ * @guid: Group id
+ * @handle: store acpi handle
+ * @reg_value: regulatory value
+ * Regulatory 0: FCC, 1: CE, 2: ISED
+ * @sar_device: platform_device type
+ * @sar_kobject: kobject for sysfs
+ * @supported_data: wwan_supported_info struct
+ * @sar_data: wwan_device_mode_info struct
+ * @config_data: wwan_device_mode_configuration array struct
+ */
+struct wwan_sar_context {
+	guid_t guid;
+	acpi_handle handle;
+	int reg_value;
+	struct platform_device *sar_device;
+	struct wwan_supported_info supported_data;
+	struct wwan_device_mode_info sar_data;
+	struct wwan_device_mode_configuration config_data[MAX_REGULATORY];
+};
+#endif /* INTEL_SAR_H */
diff --git a/drivers/platform/x86/intel/int3472/Kconfig b/drivers/platform/x86/intel/int3472/Kconfig
new file mode 100644
index 000000000..62e5d4cf9
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/Kconfig
@@ -0,0 +1,30 @@
+config INTEL_SKL_INT3472
+	tristate "Intel SkyLake ACPI INT3472 Driver"
+	depends on ACPI
+	depends on COMMON_CLK
+	depends on I2C
+	depends on GPIOLIB
+	depends on REGULATOR
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This driver adds power controller support for the Intel SkyCam
+	  devices found on the Intel SkyLake platforms.
+
+	  The INT3472 is a camera power controller, a logical device found on
+	  Intel Skylake-based systems that can map to different hardware
+	  devices depending on the platform. On machines designed for Chrome OS
+	  it maps to a TPS68470 camera PMIC. On machines designed for Windows,
+	  it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a
+	  set of discrete GPIOs and power gates.
+
+	  If your device was designed for Chrome OS, this driver will provide
+	  an ACPI OpRegion, which must be available before any of the devices
+	  using it are probed. For this reason, you should select Y if your
+	  device was designed for ChromeOS. For the same reason the
+	  I2C_DESIGNWARE_PLATFORM option must be set to Y too.
+
+	  Say Y or M here if you have a SkyLake device designed for use
+	  with Windows or ChromeOS. Say N here if you are not sure.
+
+	  The module will be named "intel-skl-int3472".
diff --git a/drivers/platform/x86/intel/int3472/Makefile b/drivers/platform/x86/intel/int3472/Makefile
new file mode 100644
index 000000000..cfec7784c
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_INTEL_SKL_INT3472)		+= intel_skl_int3472_discrete.o \
+					   intel_skl_int3472_tps68470.o
+intel_skl_int3472_discrete-y		:= discrete.o clk_and_regulator.o common.o
+intel_skl_int3472_tps68470-y		:= tps68470.o tps68470_board_data.o common.o
diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
new file mode 100644
index 000000000..74dc2cff7
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/*
+ * The regulators have to have .ops to be valid, but the only ops we actually
+ * support are .enable and .disable which are handled via .ena_gpiod. Pass an
+ * empty struct to clear the check without lying about capabilities.
+ */
+static const struct regulator_ops int3472_gpio_regulator_ops;
+
+static int skl_int3472_clk_prepare(struct clk_hw *hw)
+{
+	struct int3472_gpio_clock *clk = to_int3472_clk(hw);
+
+	gpiod_set_value_cansleep(clk->ena_gpio, 1);
+	gpiod_set_value_cansleep(clk->led_gpio, 1);
+
+	return 0;
+}
+
+static void skl_int3472_clk_unprepare(struct clk_hw *hw)
+{
+	struct int3472_gpio_clock *clk = to_int3472_clk(hw);
+
+	gpiod_set_value_cansleep(clk->ena_gpio, 0);
+	gpiod_set_value_cansleep(clk->led_gpio, 0);
+}
+
+static int skl_int3472_clk_enable(struct clk_hw *hw)
+{
+	/*
+	 * We're just turning a GPIO on to enable the clock, which operation
+	 * has the potential to sleep. Given .enable() cannot sleep, but
+	 * .prepare() can, we toggle the GPIO in .prepare() instead. Thus,
+	 * nothing to do here.
+	 */
+	return 0;
+}
+
+static void skl_int3472_clk_disable(struct clk_hw *hw)
+{
+	/* Likewise, nothing to do here... */
+}
+
+static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472)
+{
+	union acpi_object *obj;
+	unsigned int freq;
+
+	obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB");
+	if (IS_ERR(obj))
+		return 0; /* report rate as 0 on error */
+
+	if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) {
+		dev_err(int3472->dev, "The buffer is too small\n");
+		kfree(obj);
+		return 0;
+	}
+
+	freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET);
+
+	kfree(obj);
+	return freq;
+}
+
+static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct int3472_gpio_clock *clk = to_int3472_clk(hw);
+
+	return clk->frequency;
+}
+
+static const struct clk_ops skl_int3472_clock_ops = {
+	.prepare = skl_int3472_clk_prepare,
+	.unprepare = skl_int3472_clk_unprepare,
+	.enable = skl_int3472_clk_enable,
+	.disable = skl_int3472_clk_disable,
+	.recalc_rate = skl_int3472_clk_recalc_rate,
+};
+
+int skl_int3472_register_clock(struct int3472_discrete_device *int3472)
+{
+	struct clk_init_data init = {
+		.ops = &skl_int3472_clock_ops,
+		.flags = CLK_GET_RATE_NOCACHE,
+	};
+	int ret;
+
+	init.name = kasprintf(GFP_KERNEL, "%s-clk",
+			      acpi_dev_name(int3472->adev));
+	if (!init.name)
+		return -ENOMEM;
+
+	int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472);
+
+	int3472->clock.clk_hw.init = &init;
+	int3472->clock.clk = clk_register(&int3472->adev->dev,
+					  &int3472->clock.clk_hw);
+	if (IS_ERR(int3472->clock.clk)) {
+		ret = PTR_ERR(int3472->clock.clk);
+		goto out_free_init_name;
+	}
+
+	int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL,
+					  int3472->sensor_name);
+	if (!int3472->clock.cl) {
+		ret = -ENOMEM;
+		goto err_unregister_clk;
+	}
+
+	kfree(init.name);
+	return 0;
+
+err_unregister_clk:
+	clk_unregister(int3472->clock.clk);
+out_free_init_name:
+	kfree(init.name);
+
+	return ret;
+}
+
+void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
+{
+	clkdev_drop(int3472->clock.cl);
+	clk_unregister(int3472->clock.clk);
+}
+
+int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
+				   struct acpi_resource_gpio *agpio)
+{
+	const struct int3472_sensor_config *sensor_config;
+	char *path = agpio->resource_source.string_ptr;
+	struct regulator_consumer_supply supply_map;
+	struct regulator_init_data init_data = { };
+	struct regulator_config cfg = { };
+	int ret;
+
+	sensor_config = int3472->sensor_config;
+	if (IS_ERR(sensor_config)) {
+		dev_err(int3472->dev, "No sensor module config\n");
+		return PTR_ERR(sensor_config);
+	}
+
+	if (!sensor_config->supply_map.supply) {
+		dev_err(int3472->dev, "No supply name defined\n");
+		return -ENODEV;
+	}
+
+	init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+	init_data.num_consumer_supplies = 1;
+	supply_map = sensor_config->supply_map;
+	supply_map.dev_name = int3472->sensor_name;
+	init_data.consumer_supplies = &supply_map;
+
+	snprintf(int3472->regulator.regulator_name,
+		 sizeof(int3472->regulator.regulator_name), "%s-regulator",
+		 acpi_dev_name(int3472->adev));
+	snprintf(int3472->regulator.supply_name,
+		 GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0");
+
+	int3472->regulator.rdesc = INT3472_REGULATOR(
+						int3472->regulator.regulator_name,
+						int3472->regulator.supply_name,
+						&int3472_gpio_regulator_ops);
+
+	int3472->regulator.gpio = acpi_get_and_request_gpiod(path, agpio->pin_table[0],
+							     "int3472,regulator");
+	if (IS_ERR(int3472->regulator.gpio)) {
+		dev_err(int3472->dev, "Failed to get regulator GPIO line\n");
+		return PTR_ERR(int3472->regulator.gpio);
+	}
+
+	/* Ensure the pin is in output mode and non-active state */
+	gpiod_direction_output(int3472->regulator.gpio, 0);
+
+	cfg.dev = &int3472->adev->dev;
+	cfg.init_data = &init_data;
+	cfg.ena_gpiod = int3472->regulator.gpio;
+
+	int3472->regulator.rdev = regulator_register(int3472->dev,
+						     &int3472->regulator.rdesc,
+						     &cfg);
+	if (IS_ERR(int3472->regulator.rdev)) {
+		ret = PTR_ERR(int3472->regulator.rdev);
+		goto err_free_gpio;
+	}
+
+	return 0;
+
+err_free_gpio:
+	gpiod_put(int3472->regulator.gpio);
+
+	return ret;
+}
+
+void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472)
+{
+	regulator_unregister(int3472->regulator.rdev);
+	gpiod_put(int3472->regulator.gpio);
+}
diff --git a/drivers/platform/x86/intel/int3472/common.c b/drivers/platform/x86/intel/int3472/common.c
new file mode 100644
index 000000000..9db2bb0bb
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/common.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	acpi_handle handle = adev->handle;
+	union acpi_object *obj;
+	acpi_status status;
+
+	status = acpi_evaluate_object(handle, id, NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return ERR_PTR(-ENODEV);
+
+	obj = buffer.pointer;
+	if (!obj)
+		return ERR_PTR(-ENODEV);
+
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id);
+		kfree(obj);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return obj;
+}
+
+int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb)
+{
+	union acpi_object *obj;
+	int ret;
+
+	obj = skl_int3472_get_acpi_buffer(adev, "CLDB");
+	if (IS_ERR(obj))
+		return PTR_ERR(obj);
+
+	if (obj->buffer.length > sizeof(*cldb)) {
+		acpi_handle_err(adev->handle, "The CLDB buffer is too large\n");
+		ret = -EINVAL;
+		goto out_free_obj;
+	}
+
+	memcpy(cldb, obj->buffer.pointer, obj->buffer.length);
+	ret = 0;
+
+out_free_obj:
+	kfree(obj);
+	return ret;
+}
+
+/* sensor_adev_ret may be NULL, name_ret must not be NULL */
+int skl_int3472_get_sensor_adev_and_name(struct device *dev,
+					 struct acpi_device **sensor_adev_ret,
+					 const char **name_ret)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct acpi_device *sensor;
+	int ret = 0;
+
+	sensor = acpi_dev_get_next_consumer_dev(adev, NULL);
+	if (!sensor) {
+		dev_err(dev, "INT3472 seems to have no dependents.\n");
+		return -ENODEV;
+	}
+
+	*name_ret = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT,
+				   acpi_dev_name(sensor));
+	if (!*name_ret)
+		ret = -ENOMEM;
+
+	if (ret == 0 && sensor_adev_ret)
+		*sensor_adev_ret = sensor;
+	else
+		acpi_dev_put(sensor);
+
+	return ret;
+}
diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
new file mode 100644
index 000000000..53270d19c
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/common.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#ifndef _INTEL_SKL_INT3472_H
+#define _INTEL_SKL_INT3472_H
+
+#include <linux/clk-provider.h>
+#include <linux/gpio/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/types.h>
+
+/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */
+#ifndef I2C_DEV_NAME_FORMAT
+#define I2C_DEV_NAME_FORMAT					"i2c-%s"
+#endif
+
+/* PMIC GPIO Types */
+#define INT3472_GPIO_TYPE_RESET					0x00
+#define INT3472_GPIO_TYPE_POWERDOWN				0x01
+#define INT3472_GPIO_TYPE_POWER_ENABLE				0x0b
+#define INT3472_GPIO_TYPE_CLK_ENABLE				0x0c
+#define INT3472_GPIO_TYPE_PRIVACY_LED				0x0d
+
+#define INT3472_PDEV_MAX_NAME_LEN				23
+#define INT3472_MAX_SENSOR_GPIOS				3
+
+#define GPIO_REGULATOR_NAME_LENGTH				21
+#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH			9
+
+#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET			86
+
+#define INT3472_REGULATOR(_name, _supply, _ops)			\
+	(const struct regulator_desc) {				\
+		.name = _name,					\
+		.supply_name = _supply,				\
+		.type = REGULATOR_VOLTAGE,			\
+		.ops = _ops,					\
+		.owner = THIS_MODULE,				\
+	}
+
+#define to_int3472_clk(hw)					\
+	container_of(hw, struct int3472_gpio_clock, clk_hw)
+
+#define to_int3472_device(clk)					\
+	container_of(clk, struct int3472_discrete_device, clock)
+
+struct acpi_device;
+struct i2c_client;
+struct platform_device;
+
+struct int3472_cldb {
+	u8 version;
+	/*
+	 * control logic type
+	 * 0: UNKNOWN
+	 * 1: DISCRETE(CRD-D)
+	 * 2: PMIC TPS68470
+	 * 3: PMIC uP6641
+	 */
+	u8 control_logic_type;
+	u8 control_logic_id;
+	u8 sensor_card_sku;
+	u8 reserved[28];
+};
+
+struct int3472_gpio_function_remap {
+	const char *documented;
+	const char *actual;
+};
+
+struct int3472_sensor_config {
+	const char *sensor_module_name;
+	struct regulator_consumer_supply supply_map;
+	const struct int3472_gpio_function_remap *function_maps;
+};
+
+struct int3472_discrete_device {
+	struct acpi_device *adev;
+	struct device *dev;
+	struct acpi_device *sensor;
+	const char *sensor_name;
+
+	const struct int3472_sensor_config *sensor_config;
+
+	struct int3472_gpio_regulator {
+		char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
+		char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH];
+		struct gpio_desc *gpio;
+		struct regulator_dev *rdev;
+		struct regulator_desc rdesc;
+	} regulator;
+
+	struct int3472_gpio_clock {
+		struct clk *clk;
+		struct clk_hw clk_hw;
+		struct clk_lookup *cl;
+		struct gpio_desc *ena_gpio;
+		struct gpio_desc *led_gpio;
+		u32 frequency;
+	} clock;
+
+	unsigned int ngpios; /* how many GPIOs have we seen */
+	unsigned int n_sensor_gpios; /* how many have we mapped to sensor */
+	struct gpiod_lookup_table gpios;
+};
+
+union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev,
+					       char *id);
+int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb);
+int skl_int3472_get_sensor_adev_and_name(struct device *dev,
+					 struct acpi_device **sensor_adev_ret,
+					 const char **name_ret);
+
+int skl_int3472_register_clock(struct int3472_discrete_device *int3472);
+void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472);
+
+int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
+				   struct acpi_resource_gpio *agpio);
+void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472);
+
+#endif
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
new file mode 100644
index 000000000..c42c3faa2
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/uuid.h>
+
+#include "common.h"
+
+/*
+ * 79234640-9e10-4fea-a5c1-b5aa8b19756f
+ * This _DSM GUID returns information about the GPIO lines mapped to a
+ * discrete INT3472 device. Function number 1 returns a count of the GPIO
+ * lines that are mapped. Subsequent functions return 32 bit ints encoding
+ * information about the GPIO line, including its purpose.
+ */
+static const guid_t int3472_gpio_guid =
+	GUID_INIT(0x79234640, 0x9e10, 0x4fea,
+		  0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f);
+
+/*
+ * 822ace8f-2814-4174-a56b-5f029fe079ee
+ * This _DSM GUID returns a string from the sensor device, which acts as a
+ * module identifier.
+ */
+static const guid_t cio2_sensor_module_guid =
+	GUID_INIT(0x822ace8f, 0x2814, 0x4174,
+		  0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee);
+
+/*
+ * Here follows platform specific mapping information that we can pass to
+ * the functions mapping resources to the sensors. Where the sensors have
+ * a power enable pin defined in DSDT we need to provide a supply name so
+ * the sensor drivers can find the regulator. The device name will be derived
+ * from the sensor's ACPI device within the code. Optionally, we can provide a
+ * NULL terminated array of function name mappings to deal with any platform
+ * specific deviations from the documented behaviour of GPIOs.
+ *
+ * Map a GPIO function name to NULL to prevent the driver from mapping that
+ * GPIO at all.
+ */
+
+static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = {
+	{ "reset", NULL },
+	{ "powerdown", "reset" },
+	{ }
+};
+
+static const struct int3472_sensor_config int3472_sensor_configs[] = {
+	/* Lenovo Miix 510-12ISK - OV2680, Front */
+	{ "GNDF140809R", { 0 }, ov2680_gpio_function_remaps },
+	/* Lenovo Miix 510-12ISK - OV5648, Rear */
+	{ "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL },
+	/* Surface Go 1&2 - OV5693, Front */
+	{ "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL },
+};
+
+static const struct int3472_sensor_config *
+skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472)
+{
+	union acpi_object *obj;
+	unsigned int i;
+
+	obj = acpi_evaluate_dsm_typed(int3472->sensor->handle,
+				      &cio2_sensor_module_guid, 0x00,
+				      0x01, NULL, ACPI_TYPE_STRING);
+
+	if (!obj) {
+		dev_err(int3472->dev,
+			"Failed to get sensor module string from _DSM\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (obj->string.type != ACPI_TYPE_STRING) {
+		dev_err(int3472->dev,
+			"Sensor _DSM returned a non-string value\n");
+
+		ACPI_FREE(obj);
+		return ERR_PTR(-EINVAL);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) {
+		if (!strcmp(int3472_sensor_configs[i].sensor_module_name,
+			    obj->string.pointer))
+			break;
+	}
+
+	ACPI_FREE(obj);
+
+	if (i >= ARRAY_SIZE(int3472_sensor_configs))
+		return ERR_PTR(-EINVAL);
+
+	return &int3472_sensor_configs[i];
+}
+
+static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
+					  struct acpi_resource_gpio *agpio,
+					  const char *func, u32 polarity)
+{
+	const struct int3472_sensor_config *sensor_config;
+	char *path = agpio->resource_source.string_ptr;
+	struct gpiod_lookup *table_entry;
+	struct acpi_device *adev;
+	acpi_handle handle;
+	acpi_status status;
+
+	if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) {
+		dev_warn(int3472->dev, "Too many GPIOs mapped\n");
+		return -EINVAL;
+	}
+
+	sensor_config = int3472->sensor_config;
+	if (!IS_ERR(sensor_config) && sensor_config->function_maps) {
+		const struct int3472_gpio_function_remap *remap;
+
+		for (remap = sensor_config->function_maps; remap->documented; remap++) {
+			if (!strcmp(func, remap->documented)) {
+				func = remap->actual;
+				break;
+			}
+		}
+	}
+
+	/* Functions mapped to NULL should not be mapped to the sensor */
+	if (!func)
+		return 0;
+
+	status = acpi_get_handle(NULL, path, &handle);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	adev = acpi_fetch_acpi_dev(handle);
+	if (!adev)
+		return -ENODEV;
+
+	table_entry = &int3472->gpios.table[int3472->n_sensor_gpios];
+	table_entry->key = acpi_dev_name(adev);
+	table_entry->chip_hwnum = agpio->pin_table[0];
+	table_entry->con_id = func;
+	table_entry->idx = 0;
+	table_entry->flags = polarity;
+
+	int3472->n_sensor_gpios++;
+
+	return 0;
+}
+
+static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472,
+				       struct acpi_resource_gpio *agpio, u8 type)
+{
+	char *path = agpio->resource_source.string_ptr;
+	u16 pin = agpio->pin_table[0];
+	struct gpio_desc *gpio;
+
+	switch (type) {
+	case INT3472_GPIO_TYPE_CLK_ENABLE:
+		gpio = acpi_get_and_request_gpiod(path, pin, "int3472,clk-enable");
+		if (IS_ERR(gpio))
+			return (PTR_ERR(gpio));
+
+		int3472->clock.ena_gpio = gpio;
+		/* Ensure the pin is in output mode and non-active state */
+		gpiod_direction_output(int3472->clock.ena_gpio, 0);
+		break;
+	case INT3472_GPIO_TYPE_PRIVACY_LED:
+		gpio = acpi_get_and_request_gpiod(path, pin, "int3472,privacy-led");
+		if (IS_ERR(gpio))
+			return (PTR_ERR(gpio));
+
+		int3472->clock.led_gpio = gpio;
+		/* Ensure the pin is in output mode and non-active state */
+		gpiod_direction_output(int3472->clock.led_gpio, 0);
+		break;
+	default:
+		dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor
+ * @ares: A pointer to a &struct acpi_resource
+ * @data: A pointer to a &struct int3472_discrete_device
+ *
+ * This function handles GPIO resources that are against an INT3472
+ * ACPI device, by checking the value of the corresponding _DSM entry.
+ * This will return a 32bit int, where the lowest byte represents the
+ * function of the GPIO pin:
+ *
+ * 0x00 Reset
+ * 0x01 Power down
+ * 0x0b Power enable
+ * 0x0c Clock enable
+ * 0x0d Privacy LED
+ *
+ * There are some known platform specific quirks where that does not quite
+ * hold up; for example where a pin with type 0x01 (Power down) is mapped to
+ * a sensor pin that performs a reset function or entries in _CRS and _DSM that
+ * do not actually correspond to a physical connection. These will be handled
+ * by the mapping sub-functions.
+ *
+ * GPIOs will either be mapped directly to the sensor device or else used
+ * to create clocks and regulators via the usual frameworks.
+ *
+ * Return:
+ * * 1		- To continue the loop
+ * * 0		- When all resources found are handled properly.
+ * * -EINVAL	- If the resource is not a GPIO IO resource
+ * * -ENODEV	- If the resource has no corresponding _DSM entry
+ * * -Other	- Errors propagated from one of the sub-functions.
+ */
+static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
+					     void *data)
+{
+	struct int3472_discrete_device *int3472 = data;
+	struct acpi_resource_gpio *agpio;
+	union acpi_object *obj;
+	const char *err_msg;
+	int ret;
+	u8 type;
+
+	if (!acpi_gpio_get_io_resource(ares, &agpio))
+		return 1;
+
+	/*
+	 * ngpios + 2 because the index of this _DSM function is 1-based and
+	 * the first function is just a count.
+	 */
+	obj = acpi_evaluate_dsm_typed(int3472->adev->handle,
+				      &int3472_gpio_guid, 0x00,
+				      int3472->ngpios + 2,
+				      NULL, ACPI_TYPE_INTEGER);
+
+	if (!obj) {
+		dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n",
+			 agpio->pin_table[0]);
+		return 1;
+	}
+
+	type = obj->integer.value & 0xff;
+
+	switch (type) {
+	case INT3472_GPIO_TYPE_RESET:
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "reset",
+						     GPIO_ACTIVE_LOW);
+		if (ret)
+			err_msg = "Failed to map reset pin to sensor\n";
+
+		break;
+	case INT3472_GPIO_TYPE_POWERDOWN:
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "powerdown",
+						     GPIO_ACTIVE_LOW);
+		if (ret)
+			err_msg = "Failed to map powerdown pin to sensor\n";
+
+		break;
+	case INT3472_GPIO_TYPE_CLK_ENABLE:
+	case INT3472_GPIO_TYPE_PRIVACY_LED:
+		ret = skl_int3472_map_gpio_to_clk(int3472, agpio, type);
+		if (ret)
+			err_msg = "Failed to map GPIO to clock\n";
+
+		break;
+	case INT3472_GPIO_TYPE_POWER_ENABLE:
+		ret = skl_int3472_register_regulator(int3472, agpio);
+		if (ret)
+			err_msg = "Failed to map regulator to sensor\n";
+
+		break;
+	default:
+		dev_warn(int3472->dev,
+			 "GPIO type 0x%02x unknown; the sensor may not work\n",
+			 type);
+		ret = 1;
+		break;
+	}
+
+	int3472->ngpios++;
+	ACPI_FREE(obj);
+
+	if (ret < 0)
+		return dev_err_probe(int3472->dev, ret, err_msg);
+
+	return ret;
+}
+
+static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472)
+{
+	LIST_HEAD(resource_list);
+	int ret;
+
+	/*
+	 * No error check, because not having a sensor config is not necessarily
+	 * a failure mode.
+	 */
+	int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472);
+
+	ret = acpi_dev_get_resources(int3472->adev, &resource_list,
+				     skl_int3472_handle_gpio_resources,
+				     int3472);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	/*
+	 * If we find no clock enable GPIO pin then the privacy LED won't work.
+	 * We've never seen that situation, but it's possible. Warn the user so
+	 * it's clear what's happened.
+	 */
+	if (int3472->clock.ena_gpio) {
+		ret = skl_int3472_register_clock(int3472);
+		if (ret)
+			return ret;
+	} else {
+		if (int3472->clock.led_gpio)
+			dev_warn(int3472->dev,
+				 "No clk GPIO. The privacy LED won't work\n");
+	}
+
+	int3472->gpios.dev_id = int3472->sensor_name;
+	gpiod_add_lookup_table(&int3472->gpios);
+
+	return 0;
+}
+
+static int skl_int3472_discrete_remove(struct platform_device *pdev)
+{
+	struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev);
+
+	gpiod_remove_lookup_table(&int3472->gpios);
+
+	if (int3472->clock.cl)
+		skl_int3472_unregister_clock(int3472);
+
+	gpiod_put(int3472->clock.ena_gpio);
+	gpiod_put(int3472->clock.led_gpio);
+
+	skl_int3472_unregister_regulator(int3472);
+
+	return 0;
+}
+
+static int skl_int3472_discrete_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	struct int3472_discrete_device *int3472;
+	struct int3472_cldb cldb;
+	int ret;
+
+	ret = skl_int3472_fill_cldb(adev, &cldb);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't fill CLDB structure\n");
+		return ret;
+	}
+
+	if (cldb.control_logic_type != 1) {
+		dev_err(&pdev->dev, "Unsupported control logic type %u\n",
+			cldb.control_logic_type);
+		return -EINVAL;
+	}
+
+	/* Max num GPIOs we've seen plus a terminator */
+	int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table,
+			       INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL);
+	if (!int3472)
+		return -ENOMEM;
+
+	int3472->adev = adev;
+	int3472->dev = &pdev->dev;
+	platform_set_drvdata(pdev, int3472);
+
+	ret = skl_int3472_get_sensor_adev_and_name(&pdev->dev, &int3472->sensor,
+						   &int3472->sensor_name);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialising this list means we can call gpiod_remove_lookup_table()
+	 * in failure paths without issue.
+	 */
+	INIT_LIST_HEAD(&int3472->gpios.list);
+
+	ret = skl_int3472_parse_crs(int3472);
+	if (ret) {
+		skl_int3472_discrete_remove(pdev);
+		return ret;
+	}
+
+	acpi_dev_clear_dependencies(adev);
+	return 0;
+}
+
+static const struct acpi_device_id int3472_device_id[] = {
+	{ "INT3472", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, int3472_device_id);
+
+static struct platform_driver int3472_discrete = {
+	.driver = {
+		.name = "int3472-discrete",
+		.acpi_match_table = int3472_device_id,
+	},
+	.probe = skl_int3472_discrete_probe,
+	.remove = skl_int3472_discrete_remove,
+};
+module_platform_driver(int3472_discrete);
+
+MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Discrete Device Driver");
+MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c
new file mode 100644
index 000000000..5b8d1a962
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/tps68470.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps68470.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tps68470.h>
+#include <linux/regmap.h>
+#include <linux/string.h>
+
+#include "common.h"
+#include "tps68470.h"
+
+#define DESIGNED_FOR_CHROMEOS		1
+#define DESIGNED_FOR_WINDOWS		2
+
+#define TPS68470_WIN_MFD_CELL_COUNT	3
+
+static const struct mfd_cell tps68470_cros[] = {
+	{ .name = "tps68470-gpio" },
+	{ .name = "tps68470_pmic_opregion" },
+};
+
+static const struct regmap_config tps68470_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = TPS68470_REG_MAX,
+};
+
+static int tps68470_chip_init(struct device *dev, struct regmap *regmap)
+{
+	unsigned int version;
+	int ret;
+
+	/* Force software reset */
+	ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(regmap, TPS68470_REG_REVID, &version);
+	if (ret) {
+		dev_err(dev, "Failed to read revision register: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "TPS68470 REVID: 0x%02x\n", version);
+
+	return 0;
+}
+
+/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for
+ * @adev: A pointer to a &struct acpi_device
+ *
+ * Check CLDB buffer against the PMIC's adev. If present, then we check
+ * the value of control_logic_type field and follow one of the
+ * following scenarios:
+ *
+ *	1. No CLDB - likely ACPI tables designed for ChromeOS. We
+ *	create platform devices for the GPIOs and OpRegion drivers.
+ *
+ *	2. CLDB, with control_logic_type = 2 - probably ACPI tables
+ *	made for Windows 2-in-1 platforms. Register pdevs for GPIO,
+ *	Clock and Regulator drivers to bind to.
+ *
+ *	3. Any other value in control_logic_type, we should never have
+ *	gotten to this point; fail probe and return.
+ *
+ * Return:
+ * * 1		Device intended for ChromeOS
+ * * 2		Device intended for Windows
+ * * -EINVAL	Where @adev has an object named CLDB but it does not conform to
+ *		our expectations
+ */
+static int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
+{
+	struct int3472_cldb cldb = { 0 };
+	int ret;
+
+	/*
+	 * A CLDB buffer that exists, but which does not match our expectations
+	 * should trigger an error so we don't blindly continue.
+	 */
+	ret = skl_int3472_fill_cldb(adev, &cldb);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	if (ret)
+		return DESIGNED_FOR_CHROMEOS;
+
+	if (cldb.control_logic_type != 2)
+		return -EINVAL;
+
+	return DESIGNED_FOR_WINDOWS;
+}
+
+/*
+ * Return the size of the flexible array member, because we'll need that later
+ * on to pass .pdata_size to cells.
+ */
+static int
+skl_int3472_fill_clk_pdata(struct device *dev, struct tps68470_clk_platform_data **clk_pdata)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct acpi_device *consumer;
+	unsigned int n_consumers = 0;
+	const char *sensor_name;
+	unsigned int i = 0;
+
+	for_each_acpi_consumer_dev(adev, consumer)
+		n_consumers++;
+
+	if (!n_consumers) {
+		dev_err(dev, "INT3472 seems to have no dependents\n");
+		return -ENODEV;
+	}
+
+	*clk_pdata = devm_kzalloc(dev, struct_size(*clk_pdata, consumers, n_consumers),
+				  GFP_KERNEL);
+	if (!*clk_pdata)
+		return -ENOMEM;
+
+	(*clk_pdata)->n_consumers = n_consumers;
+	i = 0;
+
+	for_each_acpi_consumer_dev(adev, consumer) {
+		sensor_name = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT,
+					     acpi_dev_name(consumer));
+		if (!sensor_name) {
+			acpi_dev_put(consumer);
+			return -ENOMEM;
+		}
+
+		(*clk_pdata)->consumers[i].consumer_dev_name = sensor_name;
+		i++;
+	}
+
+	return n_consumers;
+}
+
+static int skl_int3472_tps68470_probe(struct i2c_client *client)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+	const struct int3472_tps68470_board_data *board_data;
+	struct tps68470_clk_platform_data *clk_pdata;
+	struct mfd_cell *cells;
+	struct regmap *regmap;
+	int n_consumers;
+	int device_type;
+	int ret;
+	int i;
+
+	n_consumers = skl_int3472_fill_clk_pdata(&client->dev, &clk_pdata);
+	if (n_consumers < 0)
+		return n_consumers;
+
+	regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	i2c_set_clientdata(client, regmap);
+
+	ret = tps68470_chip_init(&client->dev, regmap);
+	if (ret < 0) {
+		dev_err(&client->dev, "TPS68470 init error %d\n", ret);
+		return ret;
+	}
+
+	device_type = skl_int3472_tps68470_calc_type(adev);
+	switch (device_type) {
+	case DESIGNED_FOR_WINDOWS:
+		board_data = int3472_tps68470_get_board_data(dev_name(&client->dev));
+		if (!board_data)
+			return dev_err_probe(&client->dev, -ENODEV, "No board-data found for this model\n");
+
+		cells = kcalloc(TPS68470_WIN_MFD_CELL_COUNT, sizeof(*cells), GFP_KERNEL);
+		if (!cells)
+			return -ENOMEM;
+
+		/*
+		 * The order of the cells matters here! The clk must be first
+		 * because the regulator depends on it. The gpios must be last,
+		 * acpi_gpiochip_add() calls acpi_dev_clear_dependencies() and
+		 * the clk + regulators must be ready when this happens.
+		 */
+		cells[0].name = "tps68470-clk";
+		cells[0].platform_data = clk_pdata;
+		cells[0].pdata_size = struct_size(clk_pdata, consumers, n_consumers);
+		cells[1].name = "tps68470-regulator";
+		cells[1].platform_data = (void *)board_data->tps68470_regulator_pdata;
+		cells[1].pdata_size = sizeof(struct tps68470_regulator_platform_data);
+		cells[2].name = "tps68470-gpio";
+
+		for (i = 0; i < board_data->n_gpiod_lookups; i++)
+			gpiod_add_lookup_table(board_data->tps68470_gpio_lookup_tables[i]);
+
+		ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+					   cells, TPS68470_WIN_MFD_CELL_COUNT,
+					   NULL, 0, NULL);
+		kfree(cells);
+
+		if (ret) {
+			for (i = 0; i < board_data->n_gpiod_lookups; i++)
+				gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]);
+		}
+
+		break;
+	case DESIGNED_FOR_CHROMEOS:
+		ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+					   tps68470_cros, ARRAY_SIZE(tps68470_cros),
+					   NULL, 0, NULL);
+		break;
+	default:
+		dev_err(&client->dev, "Failed to add MFD devices\n");
+		return device_type;
+	}
+
+	/*
+	 * No acpi_dev_clear_dependencies() here, since the acpi_gpiochip_add()
+	 * for the GPIO cell already does this.
+	 */
+
+	return ret;
+}
+
+static void skl_int3472_tps68470_remove(struct i2c_client *client)
+{
+	const struct int3472_tps68470_board_data *board_data;
+	int i;
+
+	board_data = int3472_tps68470_get_board_data(dev_name(&client->dev));
+	if (board_data) {
+		for (i = 0; i < board_data->n_gpiod_lookups; i++)
+			gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]);
+	}
+}
+
+static const struct acpi_device_id int3472_device_id[] = {
+	{ "INT3472", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, int3472_device_id);
+
+static struct i2c_driver int3472_tps68470 = {
+	.driver = {
+		.name = "int3472-tps68470",
+		.acpi_match_table = int3472_device_id,
+	},
+	.probe_new = skl_int3472_tps68470_probe,
+	.remove = skl_int3472_tps68470_remove,
+};
+module_i2c_driver(int3472_tps68470);
+
+MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI TPS68470 Device Driver");
+MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_SOFTDEP("pre: clk-tps68470 tps68470-regulator");
diff --git a/drivers/platform/x86/intel/int3472/tps68470.h b/drivers/platform/x86/intel/int3472/tps68470.h
new file mode 100644
index 000000000..35915e701
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/tps68470.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _INTEL_SKL_INT3472_TPS68470_H
+#define _INTEL_SKL_INT3472_TPS68470_H
+
+struct gpiod_lookup_table;
+struct tps68470_regulator_platform_data;
+
+struct int3472_tps68470_board_data {
+	const char *dev_name;
+	const struct tps68470_regulator_platform_data *tps68470_regulator_pdata;
+	unsigned int n_gpiod_lookups;
+	struct gpiod_lookup_table *tps68470_gpio_lookup_tables[];
+};
+
+const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name);
+
+#endif
diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
new file mode 100644
index 000000000..322237e05
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Dan Scally <djrscally@gmail.com>
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/tps68470.h>
+#include <linux/regulator/machine.h>
+#include "tps68470.h"
+
+static struct regulator_consumer_supply int347a_core_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-INT347A:00"),
+};
+
+static struct regulator_consumer_supply int347a_ana_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-INT347A:00"),
+};
+
+static struct regulator_consumer_supply int347a_vcm_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "i2c-INT347A:00-VCM"),
+};
+
+static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"),
+	REGULATOR_SUPPLY("vsio", "i2c-INT347A:00-VCM"),
+	REGULATOR_SUPPLY("vddd", "i2c-INT347E:00"),
+};
+
+static struct regulator_consumer_supply int347a_aux1_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdda", "i2c-INT347E:00"),
+};
+
+static struct regulator_consumer_supply int347a_aux2_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdddo", "i2c-INT347E:00"),
+};
+
+static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_core_consumer_supplies),
+	.consumer_supplies = int347a_core_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_ana_consumer_supplies),
+	.consumer_supplies = int347a_ana_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_vcm_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_vcm_consumer_supplies),
+	.consumer_supplies = int347a_vcm_consumer_supplies,
+};
+
+/* Ensure the always-on VIO regulator has the same voltage as VSIO */
+static const struct regulator_init_data surface_go_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+};
+
+static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_vsio_consumer_supplies),
+	.consumer_supplies = int347a_vsio_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_aux1_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_aux1_consumer_supplies),
+	.consumer_supplies = int347a_aux1_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_aux2_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_aux2_consumer_supplies),
+	.consumer_supplies = int347a_aux2_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &surface_go_tps68470_ana_reg_init_data,
+		[TPS68470_VCM]  = &surface_go_tps68470_vcm_reg_init_data,
+		[TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data,
+		[TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data,
+		[TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data,
+	},
+};
+
+static struct gpiod_lookup_table surface_go_int347a_gpios = {
+	.dev_id = "i2c-INT347A:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table surface_go_int347e_gpios = {
+	.dev_id = "i2c-INT347E:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 5, "enable", GPIO_ACTIVE_HIGH),
+		{ }
+	}
+};
+
+static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:05",
+	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
+	.n_gpiod_lookups = 2,
+	.tps68470_gpio_lookup_tables = {
+		&surface_go_int347a_gpios,
+		&surface_go_int347e_gpios,
+	},
+};
+
+static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:01",
+	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
+	.n_gpiod_lookups = 2,
+	.tps68470_gpio_lookup_tables = {
+		&surface_go_int347a_gpios,
+		&surface_go_int347e_gpios,
+	},
+};
+
+static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go"),
+		},
+		.driver_data = (void *)&surface_go_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 2"),
+		},
+		.driver_data = (void *)&surface_go_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"),
+		},
+		.driver_data = (void *)&surface_go3_tps68470_board_data,
+	},
+	{ }
+};
+
+const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name)
+{
+	const struct int3472_tps68470_board_data *board_data;
+	const struct dmi_system_id *match;
+
+	for (match = dmi_first_match(int3472_tps68470_board_data_table);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		board_data = match->driver_data;
+		if (strcmp(board_data->dev_name, dev_name) == 0)
+			return board_data;
+	}
+
+	return NULL;
+}
diff --git a/drivers/platform/x86/intel/ishtp_eclite.c b/drivers/platform/x86/intel/ishtp_eclite.c
new file mode 100644
index 000000000..93ac8b2db
--- /dev/null
+++ b/drivers/platform/x86/intel/ishtp_eclite.c
@@ -0,0 +1,703 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel ECLite opregion driver for talking to ECLite firmware running on
+ * Intel Integrated Sensor Hub (ISH) using ISH Transport Protocol (ISHTP)
+ *
+ * Copyright (c) 2021, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/intel-ish-client-if.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/types.h>
+#include <linux/uuid.h>
+#include <linux/uaccess.h>
+
+#define ECLITE_DATA_OPREGION_ID	0x9E
+#define ECLITE_CMD_OPREGION_ID	0x9F
+
+#define ECL_MSG_DATA	0x1
+#define ECL_MSG_EVENT	0x2
+
+#define ECL_ISH_READ	0x1
+#define ECL_ISH_WRITE	0x2
+#define ECL_ISH_HEADER_VERSION	0
+
+#define ECL_CL_RX_RING_SIZE	16
+#define ECL_CL_TX_RING_SIZE	8
+
+#define ECL_DATA_OPR_BUFLEN	384
+#define ECL_EVENTS_NOTIFY	333
+
+#define cmd_opr_offsetof(element)	offsetof(struct opregion_cmd, element)
+#define cl_data_to_dev(opr_dev)	ishtp_device((opr_dev)->cl_device)
+
+#ifndef BITS_TO_BYTES
+#define BITS_TO_BYTES(x) ((x) / 8)
+#endif
+
+struct opregion_cmd {
+	unsigned int command;
+	unsigned int offset;
+	unsigned int length;
+	unsigned int event_id;
+};
+
+struct opregion_data {
+	char data[ECL_DATA_OPR_BUFLEN];
+};
+
+struct opregion_context {
+	struct opregion_cmd cmd_area;
+	struct opregion_data data_area;
+};
+
+struct ecl_message_header {
+	unsigned int version:2;
+	unsigned int data_type:2;
+	unsigned int request_type:2;
+	unsigned int offset:9;
+	unsigned int data_len:9;
+	unsigned int event:8;
+};
+
+struct ecl_message {
+	struct ecl_message_header header;
+	char payload[ECL_DATA_OPR_BUFLEN];
+};
+
+struct ishtp_opregion_dev {
+	struct opregion_context opr_context;
+	struct ishtp_cl *ecl_ishtp_cl;
+	struct ishtp_cl_device *cl_device;
+	struct ishtp_fw_client *fw_client;
+	struct ishtp_cl_rb *rb;
+	struct acpi_device *adev;
+	unsigned int dsm_event_id;
+	unsigned int ish_link_ready;
+	unsigned int ish_read_done;
+	unsigned int acpi_init_done;
+	wait_queue_head_t read_wait;
+	struct work_struct event_work;
+	struct work_struct reset_work;
+	/* lock for opregion context */
+	struct mutex lock;
+
+};
+
+/* eclite ishtp client UUID: 6a19cc4b-d760-4de3-b14d-f25ebd0fbcd9 */
+static const struct ishtp_device_id ecl_ishtp_id_table[] = {
+	{ .guid = GUID_INIT(0x6a19cc4b, 0xd760, 0x4de3,
+		  0xb1, 0x4d, 0xf2, 0x5e, 0xbd, 0xf, 0xbc, 0xd9), },
+	{ }
+};
+MODULE_DEVICE_TABLE(ishtp, ecl_ishtp_id_table);
+
+/* ACPI DSM UUID: 91d936a7-1f01-49c6-a6b4-72f00ad8d8a5 */
+static const guid_t ecl_acpi_guid =
+	GUID_INIT(0x91d936a7, 0x1f01, 0x49c6, 0xa6,
+		  0xb4, 0x72, 0xf0, 0x0a, 0xd8, 0xd8, 0xa5);
+
+/**
+ * ecl_ish_cl_read() - Read data from eclite FW
+ *
+ * @opr_dev:  pointer to opregion device
+ *
+ * This function issues a read request to eclite FW and waits until it
+ * receives a response. When response is received the read data is copied to
+ * opregion buffer.
+ */
+static int ecl_ish_cl_read(struct ishtp_opregion_dev *opr_dev)
+{
+	struct ecl_message_header header;
+	int len, rv;
+
+	if (!opr_dev->ish_link_ready)
+		return -EIO;
+
+	if ((opr_dev->opr_context.cmd_area.offset +
+	     opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) {
+		return -EINVAL;
+	}
+
+	header.version = ECL_ISH_HEADER_VERSION;
+	header.data_type = ECL_MSG_DATA;
+	header.request_type = ECL_ISH_READ;
+	header.offset = opr_dev->opr_context.cmd_area.offset;
+	header.data_len = opr_dev->opr_context.cmd_area.length;
+	header.event = opr_dev->opr_context.cmd_area.event_id;
+	len = sizeof(header);
+
+	opr_dev->ish_read_done = false;
+	rv = ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&header, len);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev), "ish-read : send failed\n");
+		return -EIO;
+	}
+
+	dev_dbg(cl_data_to_dev(opr_dev),
+		"[ish_rd] Req: off : %x, len : %x\n",
+		header.offset,
+		header.data_len);
+
+	rv = wait_event_interruptible_timeout(opr_dev->read_wait,
+					      opr_dev->ish_read_done,
+					      2 * HZ);
+	if (!rv) {
+		dev_err(cl_data_to_dev(opr_dev),
+			"[ish_rd] No response from firmware\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * ecl_ish_cl_write() - This function writes data to eclite FW.
+ *
+ * @opr_dev:  pointer to opregion device
+ *
+ * This function writes data to eclite FW.
+ */
+static int ecl_ish_cl_write(struct ishtp_opregion_dev *opr_dev)
+{
+	struct ecl_message message;
+	int len;
+
+	if (!opr_dev->ish_link_ready)
+		return -EIO;
+
+	if ((opr_dev->opr_context.cmd_area.offset +
+	     opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) {
+		return -EINVAL;
+	}
+
+	message.header.version = ECL_ISH_HEADER_VERSION;
+	message.header.data_type = ECL_MSG_DATA;
+	message.header.request_type = ECL_ISH_WRITE;
+	message.header.offset = opr_dev->opr_context.cmd_area.offset;
+	message.header.data_len = opr_dev->opr_context.cmd_area.length;
+	message.header.event = opr_dev->opr_context.cmd_area.event_id;
+	len = sizeof(struct ecl_message_header) + message.header.data_len;
+
+	memcpy(message.payload,
+	       opr_dev->opr_context.data_area.data + message.header.offset,
+	       message.header.data_len);
+
+	dev_dbg(cl_data_to_dev(opr_dev),
+		"[ish_wr] off : %x, len : %x\n",
+		message.header.offset,
+		message.header.data_len);
+
+	return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len);
+}
+
+static acpi_status
+ecl_opregion_cmd_handler(u32 function, acpi_physical_address address,
+			 u32 bits, u64 *value64,
+			 void *handler_context, void *region_context)
+{
+	struct ishtp_opregion_dev *opr_dev;
+	struct opregion_cmd *cmd;
+	acpi_status status = AE_OK;
+
+	if (!region_context || !value64)
+		return AE_BAD_PARAMETER;
+
+	if (function == ACPI_READ)
+		return AE_ERROR;
+
+	opr_dev = (struct ishtp_opregion_dev *)region_context;
+
+	mutex_lock(&opr_dev->lock);
+
+	cmd = &opr_dev->opr_context.cmd_area;
+
+	switch (address) {
+	case cmd_opr_offsetof(command):
+		cmd->command = (u32)*value64;
+
+		if (cmd->command == ECL_ISH_READ)
+			status =  ecl_ish_cl_read(opr_dev);
+		else if (cmd->command == ECL_ISH_WRITE)
+			status = ecl_ish_cl_write(opr_dev);
+		else
+			status = AE_ERROR;
+		break;
+	case cmd_opr_offsetof(offset):
+		cmd->offset = (u32)*value64;
+		break;
+	case cmd_opr_offsetof(length):
+		cmd->length = (u32)*value64;
+		break;
+	case cmd_opr_offsetof(event_id):
+		cmd->event_id = (u32)*value64;
+		break;
+	default:
+		status = AE_ERROR;
+	}
+
+	mutex_unlock(&opr_dev->lock);
+
+	return status;
+}
+
+static acpi_status
+ecl_opregion_data_handler(u32 function, acpi_physical_address address,
+			  u32 bits, u64 *value64,
+			  void *handler_context, void *region_context)
+{
+	struct ishtp_opregion_dev *opr_dev;
+	unsigned int bytes = BITS_TO_BYTES(bits);
+	void *data_addr;
+
+	if (!region_context || !value64)
+		return AE_BAD_PARAMETER;
+
+	if (address + bytes > ECL_DATA_OPR_BUFLEN)
+		return AE_BAD_PARAMETER;
+
+	opr_dev = (struct ishtp_opregion_dev *)region_context;
+
+	mutex_lock(&opr_dev->lock);
+
+	data_addr = &opr_dev->opr_context.data_area.data[address];
+
+	if (function == ACPI_READ) {
+		memcpy(value64, data_addr, bytes);
+	} else if (function == ACPI_WRITE) {
+		memcpy(data_addr, value64, bytes);
+	} else {
+		mutex_unlock(&opr_dev->lock);
+		return AE_BAD_PARAMETER;
+	}
+
+	mutex_unlock(&opr_dev->lock);
+
+	return AE_OK;
+}
+
+static int acpi_find_eclite_device(struct ishtp_opregion_dev *opr_dev)
+{
+	struct acpi_device *adev;
+
+	/* Find ECLite device and save reference */
+	adev = acpi_dev_get_first_match_dev("INTC1035", NULL, -1);
+	if (!adev) {
+		dev_err(cl_data_to_dev(opr_dev), "eclite ACPI device not found\n");
+		return -ENODEV;
+	}
+
+	opr_dev->adev = adev;
+
+	return 0;
+}
+
+static int acpi_opregion_init(struct ishtp_opregion_dev *opr_dev)
+{
+	acpi_status status;
+
+	status = acpi_install_address_space_handler(opr_dev->adev->handle,
+						    ECLITE_CMD_OPREGION_ID,
+						    ecl_opregion_cmd_handler,
+						    NULL, opr_dev);
+	if (ACPI_FAILURE(status)) {
+		dev_err(cl_data_to_dev(opr_dev),
+			"cmd space handler install failed\n");
+		return -ENODEV;
+	}
+
+	status = acpi_install_address_space_handler(opr_dev->adev->handle,
+						    ECLITE_DATA_OPREGION_ID,
+						    ecl_opregion_data_handler,
+						    NULL, opr_dev);
+	if (ACPI_FAILURE(status)) {
+		dev_err(cl_data_to_dev(opr_dev),
+			"data space handler install failed\n");
+
+		acpi_remove_address_space_handler(opr_dev->adev->handle,
+						  ECLITE_CMD_OPREGION_ID,
+						  ecl_opregion_cmd_handler);
+		return -ENODEV;
+	}
+	opr_dev->acpi_init_done = true;
+
+	dev_dbg(cl_data_to_dev(opr_dev), "Opregion handlers are installed\n");
+
+	return 0;
+}
+
+static void acpi_opregion_deinit(struct ishtp_opregion_dev *opr_dev)
+{
+	acpi_remove_address_space_handler(opr_dev->adev->handle,
+					  ECLITE_CMD_OPREGION_ID,
+					  ecl_opregion_cmd_handler);
+
+	acpi_remove_address_space_handler(opr_dev->adev->handle,
+					  ECLITE_DATA_OPREGION_ID,
+					  ecl_opregion_data_handler);
+	opr_dev->acpi_init_done = false;
+}
+
+static void ecl_acpi_invoke_dsm(struct work_struct *work)
+{
+	struct ishtp_opregion_dev *opr_dev;
+	union acpi_object *obj;
+
+	opr_dev = container_of(work, struct ishtp_opregion_dev, event_work);
+	if (!opr_dev->acpi_init_done)
+		return;
+
+	obj = acpi_evaluate_dsm(opr_dev->adev->handle, &ecl_acpi_guid, 0,
+				opr_dev->dsm_event_id, NULL);
+	if (!obj) {
+		dev_warn(cl_data_to_dev(opr_dev), "_DSM fn call failed\n");
+		return;
+	}
+
+	dev_dbg(cl_data_to_dev(opr_dev), "Exec DSM function code: %d success\n",
+		opr_dev->dsm_event_id);
+
+	ACPI_FREE(obj);
+}
+
+static void ecl_ish_process_rx_data(struct ishtp_opregion_dev *opr_dev)
+{
+	struct ecl_message *message =
+		(struct ecl_message *)opr_dev->rb->buffer.data;
+
+	dev_dbg(cl_data_to_dev(opr_dev),
+		"[ish_rd] Resp: off : %x, len : %x\n",
+		message->header.offset,
+		message->header.data_len);
+
+	if ((message->header.offset + message->header.data_len) >
+			ECL_DATA_OPR_BUFLEN) {
+		return;
+	}
+
+	memcpy(opr_dev->opr_context.data_area.data + message->header.offset,
+	       message->payload, message->header.data_len);
+
+	opr_dev->ish_read_done = true;
+	wake_up_interruptible(&opr_dev->read_wait);
+}
+
+static void ecl_ish_process_rx_event(struct ishtp_opregion_dev *opr_dev)
+{
+	struct ecl_message_header *header =
+		(struct ecl_message_header *)opr_dev->rb->buffer.data;
+
+	dev_dbg(cl_data_to_dev(opr_dev),
+		"[ish_ev] Evt received: %8x\n", header->event);
+
+	opr_dev->dsm_event_id = header->event;
+	schedule_work(&opr_dev->event_work);
+}
+
+static int ecl_ish_cl_enable_events(struct ishtp_opregion_dev *opr_dev,
+				    bool config_enable)
+{
+	struct ecl_message message;
+	int len;
+
+	message.header.version = ECL_ISH_HEADER_VERSION;
+	message.header.data_type = ECL_MSG_DATA;
+	message.header.request_type = ECL_ISH_WRITE;
+	message.header.offset = ECL_EVENTS_NOTIFY;
+	message.header.data_len = 1;
+	message.payload[0] = config_enable;
+
+	len = sizeof(struct ecl_message_header) + message.header.data_len;
+
+	return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len);
+}
+
+static void ecl_ishtp_cl_event_cb(struct ishtp_cl_device *cl_device)
+{
+	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
+	struct ishtp_opregion_dev *opr_dev;
+	struct ecl_message_header *header;
+	struct ishtp_cl_rb *rb;
+
+	opr_dev = ishtp_get_client_data(ecl_ishtp_cl);
+	while ((rb = ishtp_cl_rx_get_rb(opr_dev->ecl_ishtp_cl)) != NULL) {
+		opr_dev->rb = rb;
+		header = (struct ecl_message_header *)rb->buffer.data;
+
+		if (header->data_type == ECL_MSG_DATA)
+			ecl_ish_process_rx_data(opr_dev);
+		else if (header->data_type == ECL_MSG_EVENT)
+			ecl_ish_process_rx_event(opr_dev);
+		else
+			/* Got an event with wrong data_type, ignore it */
+			dev_err(cl_data_to_dev(opr_dev),
+				"[ish_cb] Received wrong data_type\n");
+
+		ishtp_cl_io_rb_recycle(rb);
+	}
+}
+
+static int ecl_ishtp_cl_init(struct ishtp_cl *ecl_ishtp_cl)
+{
+	struct ishtp_opregion_dev *opr_dev =
+		ishtp_get_client_data(ecl_ishtp_cl);
+	struct ishtp_fw_client *fw_client;
+	struct ishtp_device *dev;
+	int rv;
+
+	rv = ishtp_cl_link(ecl_ishtp_cl);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev), "ishtp_cl_link failed\n");
+		return	rv;
+	}
+
+	dev = ishtp_get_ishtp_device(ecl_ishtp_cl);
+
+	/* Connect to FW client */
+	ishtp_set_tx_ring_size(ecl_ishtp_cl, ECL_CL_TX_RING_SIZE);
+	ishtp_set_rx_ring_size(ecl_ishtp_cl, ECL_CL_RX_RING_SIZE);
+
+	fw_client = ishtp_fw_cl_get_client(dev, &ecl_ishtp_id_table[0].guid);
+	if (!fw_client) {
+		dev_err(cl_data_to_dev(opr_dev), "fw client not found\n");
+		return -ENOENT;
+	}
+
+	ishtp_cl_set_fw_client_id(ecl_ishtp_cl,
+				  ishtp_get_fw_client_id(fw_client));
+
+	ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_CONNECTING);
+
+	rv = ishtp_cl_connect(ecl_ishtp_cl);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev), "client connect failed\n");
+
+		ishtp_cl_unlink(ecl_ishtp_cl);
+		return rv;
+	}
+
+	dev_dbg(cl_data_to_dev(opr_dev), "Host connected to fw client\n");
+
+	return 0;
+}
+
+static void ecl_ishtp_cl_deinit(struct ishtp_cl *ecl_ishtp_cl)
+{
+	ishtp_cl_unlink(ecl_ishtp_cl);
+	ishtp_cl_flush_queues(ecl_ishtp_cl);
+	ishtp_cl_free(ecl_ishtp_cl);
+}
+
+static void ecl_ishtp_cl_reset_handler(struct work_struct *work)
+{
+	struct ishtp_opregion_dev *opr_dev;
+	struct ishtp_cl_device *cl_device;
+	struct ishtp_cl *ecl_ishtp_cl;
+	int rv;
+	int retry;
+
+	opr_dev = container_of(work, struct ishtp_opregion_dev, reset_work);
+
+	opr_dev->ish_link_ready = false;
+
+	cl_device = opr_dev->cl_device;
+	ecl_ishtp_cl = opr_dev->ecl_ishtp_cl;
+
+	ecl_ishtp_cl_deinit(ecl_ishtp_cl);
+
+	ecl_ishtp_cl = ishtp_cl_allocate(cl_device);
+	if (!ecl_ishtp_cl)
+		return;
+
+	ishtp_set_drvdata(cl_device, ecl_ishtp_cl);
+	ishtp_set_client_data(ecl_ishtp_cl, opr_dev);
+
+	opr_dev->ecl_ishtp_cl = ecl_ishtp_cl;
+
+	for (retry = 0; retry < 3; ++retry) {
+		rv = ecl_ishtp_cl_init(ecl_ishtp_cl);
+		if (!rv)
+			break;
+	}
+	if (rv) {
+		ishtp_cl_free(ecl_ishtp_cl);
+		opr_dev->ecl_ishtp_cl = NULL;
+		dev_err(cl_data_to_dev(opr_dev),
+			"[ish_rst] Reset failed. Link not ready.\n");
+		return;
+	}
+
+	ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb);
+	dev_info(cl_data_to_dev(opr_dev),
+		 "[ish_rst] Reset Success. Link ready.\n");
+
+	opr_dev->ish_link_ready = true;
+
+	if (opr_dev->acpi_init_done)
+		return;
+
+	rv = acpi_opregion_init(opr_dev);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev),
+			"ACPI opregion init failed\n");
+	}
+}
+
+static int ecl_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
+{
+	struct ishtp_cl *ecl_ishtp_cl;
+	struct ishtp_opregion_dev *opr_dev;
+	int rv;
+
+	opr_dev = devm_kzalloc(ishtp_device(cl_device), sizeof(*opr_dev),
+			       GFP_KERNEL);
+	if (!opr_dev)
+		return -ENOMEM;
+
+	ecl_ishtp_cl = ishtp_cl_allocate(cl_device);
+	if (!ecl_ishtp_cl)
+		return -ENOMEM;
+
+	ishtp_set_drvdata(cl_device, ecl_ishtp_cl);
+	ishtp_set_client_data(ecl_ishtp_cl, opr_dev);
+	opr_dev->ecl_ishtp_cl = ecl_ishtp_cl;
+	opr_dev->cl_device = cl_device;
+
+	init_waitqueue_head(&opr_dev->read_wait);
+	INIT_WORK(&opr_dev->event_work, ecl_acpi_invoke_dsm);
+	INIT_WORK(&opr_dev->reset_work, ecl_ishtp_cl_reset_handler);
+
+	/* Initialize ish client device */
+	rv = ecl_ishtp_cl_init(ecl_ishtp_cl);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev), "Client init failed\n");
+		goto err_exit;
+	}
+
+	dev_dbg(cl_data_to_dev(opr_dev), "eclite-ishtp client initialised\n");
+
+	opr_dev->ish_link_ready = true;
+	mutex_init(&opr_dev->lock);
+
+	rv = acpi_find_eclite_device(opr_dev);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev), "ECLite ACPI ID not found\n");
+		goto err_exit;
+	}
+
+	/* Register a handler for eclite fw events */
+	ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb);
+
+	/* Now init opregion handlers */
+	rv = acpi_opregion_init(opr_dev);
+	if (rv) {
+		dev_err(cl_data_to_dev(opr_dev), "ACPI opregion init failed\n");
+		goto err_exit;
+	}
+
+	/* Reprobe devices depending on ECLite - battery, fan, etc. */
+	acpi_dev_clear_dependencies(opr_dev->adev);
+
+	return 0;
+err_exit:
+	ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING);
+	ishtp_cl_disconnect(ecl_ishtp_cl);
+	ecl_ishtp_cl_deinit(ecl_ishtp_cl);
+
+	return rv;
+}
+
+static void ecl_ishtp_cl_remove(struct ishtp_cl_device *cl_device)
+{
+	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
+	struct ishtp_opregion_dev *opr_dev =
+		ishtp_get_client_data(ecl_ishtp_cl);
+
+	if (opr_dev->acpi_init_done)
+		acpi_opregion_deinit(opr_dev);
+
+	acpi_dev_put(opr_dev->adev);
+
+	ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING);
+	ishtp_cl_disconnect(ecl_ishtp_cl);
+	ecl_ishtp_cl_deinit(ecl_ishtp_cl);
+
+	cancel_work_sync(&opr_dev->reset_work);
+	cancel_work_sync(&opr_dev->event_work);
+}
+
+static int ecl_ishtp_cl_reset(struct ishtp_cl_device *cl_device)
+{
+	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
+	struct ishtp_opregion_dev *opr_dev =
+		ishtp_get_client_data(ecl_ishtp_cl);
+
+	schedule_work(&opr_dev->reset_work);
+
+	return 0;
+}
+
+static int ecl_ishtp_cl_suspend(struct device *device)
+{
+	struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device);
+	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
+	struct ishtp_opregion_dev *opr_dev =
+		ishtp_get_client_data(ecl_ishtp_cl);
+
+	if (acpi_target_system_state() == ACPI_STATE_S0)
+		return 0;
+
+	acpi_opregion_deinit(opr_dev);
+	ecl_ish_cl_enable_events(opr_dev, false);
+
+	return 0;
+}
+
+static int ecl_ishtp_cl_resume(struct device *device)
+{
+	/* A reset is expected to call after an Sx. At this point
+	 * we are not sure if the link is up or not to restore anything,
+	 * so do nothing in resume path
+	 */
+	return 0;
+}
+
+static const struct dev_pm_ops ecl_ishtp_pm_ops = {
+	.suspend = ecl_ishtp_cl_suspend,
+	.resume = ecl_ishtp_cl_resume,
+};
+
+static struct ishtp_cl_driver ecl_ishtp_cl_driver = {
+	.name = "ishtp-eclite",
+	.id = ecl_ishtp_id_table,
+	.probe = ecl_ishtp_cl_probe,
+	.remove = ecl_ishtp_cl_remove,
+	.reset = ecl_ishtp_cl_reset,
+	.driver.pm = &ecl_ishtp_pm_ops,
+};
+
+static int __init ecl_ishtp_init(void)
+{
+	return ishtp_cl_driver_register(&ecl_ishtp_cl_driver, THIS_MODULE);
+}
+
+static void __exit ecl_ishtp_exit(void)
+{
+	return ishtp_cl_driver_unregister(&ecl_ishtp_cl_driver);
+}
+
+late_initcall(ecl_ishtp_init);
+module_exit(ecl_ishtp_exit);
+
+MODULE_DESCRIPTION("ISH ISHTP eclite client opregion driver");
+MODULE_AUTHOR("K Naduvalath, Sumesh <sumesh.k.naduvalath@intel.com>");
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/mrfld_pwrbtn.c b/drivers/platform/x86/intel/mrfld_pwrbtn.c
new file mode 100644
index 000000000..d58fea517
--- /dev/null
+++ b/drivers/platform/x86/intel/mrfld_pwrbtn.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power-button driver for Basin Cove PMIC
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+#define BCOVE_PBSTATUS		0x27
+#define BCOVE_PBSTATUS_PBLVL	BIT(4)	/* 1 - release, 0 - press */
+
+static irqreturn_t mrfld_pwrbtn_interrupt(int irq, void *dev_id)
+{
+	struct input_dev *input = dev_id;
+	struct device *dev = input->dev.parent;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int state;
+	int ret;
+
+	ret = regmap_read(regmap, BCOVE_PBSTATUS, &state);
+	if (ret)
+		return IRQ_NONE;
+
+	dev_dbg(dev, "PBSTATUS=0x%x\n", state);
+	input_report_key(input, KEY_POWER, !(state & BCOVE_PBSTATUS_PBLVL));
+	input_sync(input);
+
+	regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+	return IRQ_HANDLED;
+}
+
+static int mrfld_pwrbtn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct input_dev *input;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+	input->name = pdev->name;
+	input->phys = "power-button/input0";
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+	input_set_capability(input, EV_KEY, KEY_POWER);
+	ret = input_register_device(input);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, pmic->regmap);
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_pwrbtn_interrupt,
+					IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+					input);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(pmic->regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+	regmap_update_bits(pmic->regmap, BCOVE_MPBIRQ, BCOVE_PBIRQ_PBTN, 0);
+
+	device_init_wakeup(dev, true);
+	dev_pm_set_wake_irq(dev, irq);
+	return 0;
+}
+
+static int mrfld_pwrbtn_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	dev_pm_clear_wake_irq(dev);
+	device_init_wakeup(dev, false);
+	return 0;
+}
+
+static const struct platform_device_id mrfld_pwrbtn_id_table[] = {
+	{ .name = "mrfld_bcove_pwrbtn" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_pwrbtn_id_table);
+
+static struct platform_driver mrfld_pwrbtn_driver = {
+	.driver = {
+		.name	= "mrfld_bcove_pwrbtn",
+	},
+	.probe		= mrfld_pwrbtn_probe,
+	.remove		= mrfld_pwrbtn_remove,
+	.id_table	= mrfld_pwrbtn_id_table,
+};
+module_platform_driver(mrfld_pwrbtn_driver);
+
+MODULE_DESCRIPTION("Power-button driver for Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/oaktrail.c b/drivers/platform/x86/intel/oaktrail.c
new file mode 100644
index 000000000..7c5c62363
--- /dev/null
+++ b/drivers/platform/x86/intel/oaktrail.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Intel OakTrail Platform support
+ *
+ * Copyright (C) 2010-2011 Intel Corporation
+ * Author: Yin Kangkai (kangkai.yin@intel.com)
+ *
+ * based on Compal driver, Copyright (C) 2008 Cezary Jackiewicz
+ * <cezary.jackiewicz (at) gmail.com>, based on MSI driver
+ * Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
+ *
+ * This driver does below things:
+ * 1. registers itself in the Linux backlight control in
+ *    /sys/class/backlight/intel_oaktrail/
+ *
+ * 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/
+ *    for these components: wifi, bluetooth, wwan (3g), gps
+ *
+ * This driver might work on other products based on Oaktrail. If you
+ * want to try it you can pass force=1 as argument to the module which
+ * will force it to load even when the DMI data doesn't identify the
+ * product as compatible.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/backlight.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+
+#include <acpi/video.h>
+
+#define DRIVER_NAME	"intel_oaktrail"
+#define DRIVER_VERSION	"0.4ac1"
+
+/*
+ * This is the devices status address in EC space, and the control bits
+ * definition:
+ *
+ * (1 << 0):	Camera enable/disable, RW.
+ * (1 << 1):	Bluetooth enable/disable, RW.
+ * (1 << 2):	GPS enable/disable, RW.
+ * (1 << 3):	WiFi enable/disable, RW.
+ * (1 << 4):	WWAN (3G) enable/disable, RW.
+ * (1 << 5):	Touchscreen enable/disable, Read Only.
+ */
+#define OT_EC_DEVICE_STATE_ADDRESS	0xD6
+
+#define OT_EC_CAMERA_MASK	(1 << 0)
+#define OT_EC_BT_MASK		(1 << 1)
+#define OT_EC_GPS_MASK		(1 << 2)
+#define OT_EC_WIFI_MASK		(1 << 3)
+#define OT_EC_WWAN_MASK		(1 << 4)
+#define OT_EC_TS_MASK		(1 << 5)
+
+/*
+ * This is the address in EC space and commands used to control LCD backlight:
+ *
+ * Two steps needed to change the LCD backlight:
+ *   1. write the backlight percentage into OT_EC_BL_BRIGHTNESS_ADDRESS;
+ *   2. write OT_EC_BL_CONTROL_ON_DATA into OT_EC_BL_CONTROL_ADDRESS.
+ *
+ * To read the LCD back light, just read out the value from
+ * OT_EC_BL_BRIGHTNESS_ADDRESS.
+ *
+ * LCD backlight brightness range: 0 - 100 (OT_EC_BL_BRIGHTNESS_MAX)
+ */
+#define OT_EC_BL_BRIGHTNESS_ADDRESS	0x44
+#define OT_EC_BL_BRIGHTNESS_MAX		100
+#define OT_EC_BL_CONTROL_ADDRESS	0x3A
+#define OT_EC_BL_CONTROL_ON_DATA	0x1A
+
+
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
+
+static struct platform_device *oaktrail_device;
+static struct backlight_device *oaktrail_bl_device;
+static struct rfkill *bt_rfkill;
+static struct rfkill *gps_rfkill;
+static struct rfkill *wifi_rfkill;
+static struct rfkill *wwan_rfkill;
+
+
+/* rfkill */
+static int oaktrail_rfkill_set(void *data, bool blocked)
+{
+	u8 value;
+	u8 result;
+	unsigned long radio = (unsigned long) data;
+
+	ec_read(OT_EC_DEVICE_STATE_ADDRESS, &result);
+
+	if (!blocked)
+		value = (u8) (result | radio);
+	else
+		value = (u8) (result & ~radio);
+
+	ec_write(OT_EC_DEVICE_STATE_ADDRESS, value);
+
+	return 0;
+}
+
+static const struct rfkill_ops oaktrail_rfkill_ops = {
+	.set_block = oaktrail_rfkill_set,
+};
+
+static struct rfkill *oaktrail_rfkill_new(char *name, enum rfkill_type type,
+					  unsigned long mask)
+{
+	struct rfkill *rfkill_dev;
+	u8 value;
+	int err;
+
+	rfkill_dev = rfkill_alloc(name, &oaktrail_device->dev, type,
+				  &oaktrail_rfkill_ops, (void *)mask);
+	if (!rfkill_dev)
+		return ERR_PTR(-ENOMEM);
+
+	ec_read(OT_EC_DEVICE_STATE_ADDRESS, &value);
+	rfkill_init_sw_state(rfkill_dev, (value & mask) != 1);
+
+	err = rfkill_register(rfkill_dev);
+	if (err) {
+		rfkill_destroy(rfkill_dev);
+		return ERR_PTR(err);
+	}
+
+	return rfkill_dev;
+}
+
+static inline void __oaktrail_rfkill_cleanup(struct rfkill *rf)
+{
+	if (rf) {
+		rfkill_unregister(rf);
+		rfkill_destroy(rf);
+	}
+}
+
+static void oaktrail_rfkill_cleanup(void)
+{
+	__oaktrail_rfkill_cleanup(wifi_rfkill);
+	__oaktrail_rfkill_cleanup(bt_rfkill);
+	__oaktrail_rfkill_cleanup(gps_rfkill);
+	__oaktrail_rfkill_cleanup(wwan_rfkill);
+}
+
+static int oaktrail_rfkill_init(void)
+{
+	int ret;
+
+	wifi_rfkill = oaktrail_rfkill_new("oaktrail-wifi",
+					  RFKILL_TYPE_WLAN,
+					  OT_EC_WIFI_MASK);
+	if (IS_ERR(wifi_rfkill)) {
+		ret = PTR_ERR(wifi_rfkill);
+		wifi_rfkill = NULL;
+		goto cleanup;
+	}
+
+	bt_rfkill = oaktrail_rfkill_new("oaktrail-bluetooth",
+					RFKILL_TYPE_BLUETOOTH,
+					OT_EC_BT_MASK);
+	if (IS_ERR(bt_rfkill)) {
+		ret = PTR_ERR(bt_rfkill);
+		bt_rfkill = NULL;
+		goto cleanup;
+	}
+
+	gps_rfkill = oaktrail_rfkill_new("oaktrail-gps",
+					 RFKILL_TYPE_GPS,
+					 OT_EC_GPS_MASK);
+	if (IS_ERR(gps_rfkill)) {
+		ret = PTR_ERR(gps_rfkill);
+		gps_rfkill = NULL;
+		goto cleanup;
+	}
+
+	wwan_rfkill = oaktrail_rfkill_new("oaktrail-wwan",
+					  RFKILL_TYPE_WWAN,
+					  OT_EC_WWAN_MASK);
+	if (IS_ERR(wwan_rfkill)) {
+		ret = PTR_ERR(wwan_rfkill);
+		wwan_rfkill = NULL;
+		goto cleanup;
+	}
+
+	return 0;
+
+cleanup:
+	oaktrail_rfkill_cleanup();
+	return ret;
+}
+
+
+/* backlight */
+static int get_backlight_brightness(struct backlight_device *b)
+{
+	u8 value;
+	ec_read(OT_EC_BL_BRIGHTNESS_ADDRESS, &value);
+
+	return value;
+}
+
+static int set_backlight_brightness(struct backlight_device *b)
+{
+	u8 percent = (u8) b->props.brightness;
+	if (percent < 0 || percent > OT_EC_BL_BRIGHTNESS_MAX)
+		return -EINVAL;
+
+	ec_write(OT_EC_BL_BRIGHTNESS_ADDRESS, percent);
+	ec_write(OT_EC_BL_CONTROL_ADDRESS, OT_EC_BL_CONTROL_ON_DATA);
+
+	return 0;
+}
+
+static const struct backlight_ops oaktrail_bl_ops = {
+	.get_brightness = get_backlight_brightness,
+	.update_status	= set_backlight_brightness,
+};
+
+static int oaktrail_backlight_init(void)
+{
+	struct backlight_device *bd;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_PLATFORM;
+	props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX;
+	bd = backlight_device_register(DRIVER_NAME,
+				       &oaktrail_device->dev, NULL,
+				       &oaktrail_bl_ops,
+				       &props);
+
+	if (IS_ERR(bd)) {
+		oaktrail_bl_device = NULL;
+		pr_warn("Unable to register backlight device\n");
+		return PTR_ERR(bd);
+	}
+
+	oaktrail_bl_device = bd;
+
+	bd->props.brightness = get_backlight_brightness(bd);
+	bd->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(bd);
+
+	return 0;
+}
+
+static void oaktrail_backlight_exit(void)
+{
+	backlight_device_unregister(oaktrail_bl_device);
+}
+
+static int oaktrail_probe(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int oaktrail_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver oaktrail_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+	},
+	.probe	= oaktrail_probe,
+	.remove	= oaktrail_remove,
+};
+
+static int dmi_check_cb(const struct dmi_system_id *id)
+{
+	pr_info("Identified model '%s'\n", id->ident);
+	return 0;
+}
+
+static const struct dmi_system_id oaktrail_dmi_table[] __initconst = {
+	{
+		.ident = "OakTrail platform",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "OakTrail platform"),
+		},
+		.callback = dmi_check_cb
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(dmi, oaktrail_dmi_table);
+
+static int __init oaktrail_init(void)
+{
+	int ret;
+
+	if (acpi_disabled) {
+		pr_err("ACPI needs to be enabled for this driver to work!\n");
+		return -ENODEV;
+	}
+
+	if (!force && !dmi_check_system(oaktrail_dmi_table)) {
+		pr_err("Platform not recognized (You could try the module's force-parameter)");
+		return -ENODEV;
+	}
+
+	ret = platform_driver_register(&oaktrail_driver);
+	if (ret) {
+		pr_warn("Unable to register platform driver\n");
+		goto err_driver_reg;
+	}
+
+	oaktrail_device = platform_device_alloc(DRIVER_NAME, PLATFORM_DEVID_NONE);
+	if (!oaktrail_device) {
+		pr_warn("Unable to allocate platform device\n");
+		ret = -ENOMEM;
+		goto err_device_alloc;
+	}
+
+	ret = platform_device_add(oaktrail_device);
+	if (ret) {
+		pr_warn("Unable to add platform device\n");
+		goto err_device_add;
+	}
+
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+		ret = oaktrail_backlight_init();
+		if (ret)
+			goto err_backlight;
+	}
+
+	ret = oaktrail_rfkill_init();
+	if (ret) {
+		pr_warn("Setup rfkill failed\n");
+		goto err_rfkill;
+	}
+
+	pr_info("Driver "DRIVER_VERSION" successfully loaded\n");
+	return 0;
+
+err_rfkill:
+	oaktrail_backlight_exit();
+err_backlight:
+	platform_device_del(oaktrail_device);
+err_device_add:
+	platform_device_put(oaktrail_device);
+err_device_alloc:
+	platform_driver_unregister(&oaktrail_driver);
+err_driver_reg:
+
+	return ret;
+}
+
+static void __exit oaktrail_cleanup(void)
+{
+	oaktrail_backlight_exit();
+	oaktrail_rfkill_cleanup();
+	platform_device_unregister(oaktrail_device);
+	platform_driver_unregister(&oaktrail_driver);
+
+	pr_info("Driver unloaded\n");
+}
+
+module_init(oaktrail_init);
+module_exit(oaktrail_cleanup);
+
+MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)");
+MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel/pmc/Kconfig b/drivers/platform/x86/intel/pmc/Kconfig
new file mode 100644
index 000000000..b526597e4
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Intel x86 Platform-Specific Drivers
+#
+
+config INTEL_PMC_CORE
+	tristate "Intel PMC Core driver"
+	depends on PCI
+	depends on ACPI
+	help
+	  The Intel Platform Controller Hub for Intel Core SoCs provides access
+	  to Power Management Controller registers via various interfaces. This
+	  driver can utilize debugging capabilities and supported features as
+	  exposed by the Power Management Controller. It also may perform some
+	  tasks in the PMC in order to enable transition into the SLPS0 state.
+	  It should be selected on all Intel platforms supported by the driver.
+
+	  Supported features:
+		- SLP_S0_RESIDENCY counter
+		- PCH IP Power Gating status
+		- LTR Ignore / LTR Show
+		- MPHY/PLL gating status (Sunrisepoint PCH only)
+		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
+		- Low Power Mode registers (Tigerlake and beyond)
+		- PMC quirks as needed to enable SLPS0/S0ix
diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile
new file mode 100644
index 000000000..8966fcdc0
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Intel x86 Platform-Specific Drivers
+#
+
+intel_pmc_core-y			:= core.o
+obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o
+intel_pmc_core_pltdrv-y			:= pltdrv.o
+obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core_pltdrv.o
diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c
new file mode 100644
index 000000000..be0fb9401
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/core.c
@@ -0,0 +1,2175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Core SoC Power Management Controller Driver
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Authors: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
+ *          Vishwanath Somayaji <vishwanath.somayaji@intel.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/uaccess.h>
+#include <linux/uuid.h>
+
+#include <acpi/acpi_bus.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/msr.h>
+#include <asm/tsc.h>
+
+#include "core.h"
+
+#define ACPI_S0IX_DSM_UUID		"57a6512e-3979-4e9d-9708-ff13b2508972"
+#define ACPI_GET_LOW_MODE_REGISTERS	1
+
+/* PKGC MSRs are common across Intel Core SoCs */
+static const struct pmc_bit_map msr_map[] = {
+	{"Package C2",                  MSR_PKG_C2_RESIDENCY},
+	{"Package C3",                  MSR_PKG_C3_RESIDENCY},
+	{"Package C6",                  MSR_PKG_C6_RESIDENCY},
+	{"Package C7",                  MSR_PKG_C7_RESIDENCY},
+	{"Package C8",                  MSR_PKG_C8_RESIDENCY},
+	{"Package C9",                  MSR_PKG_C9_RESIDENCY},
+	{"Package C10",                 MSR_PKG_C10_RESIDENCY},
+	{}
+};
+
+static const struct pmc_bit_map spt_pll_map[] = {
+	{"MIPI PLL",			SPT_PMC_BIT_MPHY_CMN_LANE0},
+	{"GEN2 USB2PCIE2 PLL",		SPT_PMC_BIT_MPHY_CMN_LANE1},
+	{"DMIPCIE3 PLL",		SPT_PMC_BIT_MPHY_CMN_LANE2},
+	{"SATA PLL",			SPT_PMC_BIT_MPHY_CMN_LANE3},
+	{}
+};
+
+static const struct pmc_bit_map spt_mphy_map[] = {
+	{"MPHY CORE LANE 0",           SPT_PMC_BIT_MPHY_LANE0},
+	{"MPHY CORE LANE 1",           SPT_PMC_BIT_MPHY_LANE1},
+	{"MPHY CORE LANE 2",           SPT_PMC_BIT_MPHY_LANE2},
+	{"MPHY CORE LANE 3",           SPT_PMC_BIT_MPHY_LANE3},
+	{"MPHY CORE LANE 4",           SPT_PMC_BIT_MPHY_LANE4},
+	{"MPHY CORE LANE 5",           SPT_PMC_BIT_MPHY_LANE5},
+	{"MPHY CORE LANE 6",           SPT_PMC_BIT_MPHY_LANE6},
+	{"MPHY CORE LANE 7",           SPT_PMC_BIT_MPHY_LANE7},
+	{"MPHY CORE LANE 8",           SPT_PMC_BIT_MPHY_LANE8},
+	{"MPHY CORE LANE 9",           SPT_PMC_BIT_MPHY_LANE9},
+	{"MPHY CORE LANE 10",          SPT_PMC_BIT_MPHY_LANE10},
+	{"MPHY CORE LANE 11",          SPT_PMC_BIT_MPHY_LANE11},
+	{"MPHY CORE LANE 12",          SPT_PMC_BIT_MPHY_LANE12},
+	{"MPHY CORE LANE 13",          SPT_PMC_BIT_MPHY_LANE13},
+	{"MPHY CORE LANE 14",          SPT_PMC_BIT_MPHY_LANE14},
+	{"MPHY CORE LANE 15",          SPT_PMC_BIT_MPHY_LANE15},
+	{}
+};
+
+static const struct pmc_bit_map spt_pfear_map[] = {
+	{"PMC",				SPT_PMC_BIT_PMC},
+	{"OPI-DMI",			SPT_PMC_BIT_OPI},
+	{"SPI / eSPI",			SPT_PMC_BIT_SPI},
+	{"XHCI",			SPT_PMC_BIT_XHCI},
+	{"SPA",				SPT_PMC_BIT_SPA},
+	{"SPB",				SPT_PMC_BIT_SPB},
+	{"SPC",				SPT_PMC_BIT_SPC},
+	{"GBE",				SPT_PMC_BIT_GBE},
+	{"SATA",			SPT_PMC_BIT_SATA},
+	{"HDA-PGD0",			SPT_PMC_BIT_HDA_PGD0},
+	{"HDA-PGD1",			SPT_PMC_BIT_HDA_PGD1},
+	{"HDA-PGD2",			SPT_PMC_BIT_HDA_PGD2},
+	{"HDA-PGD3",			SPT_PMC_BIT_HDA_PGD3},
+	{"RSVD",			SPT_PMC_BIT_RSVD_0B},
+	{"LPSS",			SPT_PMC_BIT_LPSS},
+	{"LPC",				SPT_PMC_BIT_LPC},
+	{"SMB",				SPT_PMC_BIT_SMB},
+	{"ISH",				SPT_PMC_BIT_ISH},
+	{"P2SB",			SPT_PMC_BIT_P2SB},
+	{"DFX",				SPT_PMC_BIT_DFX},
+	{"SCC",				SPT_PMC_BIT_SCC},
+	{"RSVD",			SPT_PMC_BIT_RSVD_0C},
+	{"FUSE",			SPT_PMC_BIT_FUSE},
+	{"CAMERA",			SPT_PMC_BIT_CAMREA},
+	{"RSVD",			SPT_PMC_BIT_RSVD_0D},
+	{"USB3-OTG",			SPT_PMC_BIT_USB3_OTG},
+	{"EXI",				SPT_PMC_BIT_EXI},
+	{"CSE",				SPT_PMC_BIT_CSE},
+	{"CSME_KVM",			SPT_PMC_BIT_CSME_KVM},
+	{"CSME_PMT",			SPT_PMC_BIT_CSME_PMT},
+	{"CSME_CLINK",			SPT_PMC_BIT_CSME_CLINK},
+	{"CSME_PTIO",			SPT_PMC_BIT_CSME_PTIO},
+	{"CSME_USBR",			SPT_PMC_BIT_CSME_USBR},
+	{"CSME_SUSRAM",			SPT_PMC_BIT_CSME_SUSRAM},
+	{"CSME_SMT",			SPT_PMC_BIT_CSME_SMT},
+	{"RSVD",			SPT_PMC_BIT_RSVD_1A},
+	{"CSME_SMS2",			SPT_PMC_BIT_CSME_SMS2},
+	{"CSME_SMS1",			SPT_PMC_BIT_CSME_SMS1},
+	{"CSME_RTC",			SPT_PMC_BIT_CSME_RTC},
+	{"CSME_PSF",			SPT_PMC_BIT_CSME_PSF},
+	{}
+};
+
+static const struct pmc_bit_map *ext_spt_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of spt_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	spt_pfear_map,
+	NULL
+};
+
+static const struct pmc_bit_map spt_ltr_show_map[] = {
+	{"SOUTHPORT_A",		SPT_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		SPT_PMC_LTR_SPB},
+	{"SATA",		SPT_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	SPT_PMC_LTR_GBE},
+	{"XHCI",		SPT_PMC_LTR_XHCI},
+	{"Reserved",		SPT_PMC_LTR_RESERVED},
+	{"ME",			SPT_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"EVA",			SPT_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		SPT_PMC_LTR_SPC},
+	{"HD_AUDIO",		SPT_PMC_LTR_AZ},
+	{"LPSS",		SPT_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		SPT_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		SPT_PMC_LTR_SPE},
+	{"CAMERA",		SPT_PMC_LTR_CAM},
+	{"ESPI",		SPT_PMC_LTR_ESPI},
+	{"SCC",			SPT_PMC_LTR_SCC},
+	{"ISH",			SPT_PMC_LTR_ISH},
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	SPT_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	SPT_PMC_LTR_CUR_ASLT},
+	{}
+};
+
+static const struct pmc_reg_map spt_reg_map = {
+	.pfear_sts = ext_spt_pfear_map,
+	.mphy_sts = spt_mphy_map,
+	.pll_sts = spt_pll_map,
+	.ltr_show_sts = spt_ltr_show_map,
+	.msr_sts = msr_map,
+	.slp_s0_offset = SPT_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = SPT_PMC_SLP_S0_RES_COUNTER_STEP,
+	.ltr_ignore_offset = SPT_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = SPT_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = SPT_PMC_XRAM_PPFEAR0A,
+	.ppfear_buckets = SPT_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = SPT_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = SPT_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = SPT_NUM_IP_IGN_ALLOWED,
+	.pm_vric1_offset = SPT_PMC_VRIC1_OFFSET,
+};
+
+/* Cannon Lake: PGD PFET Enable Ack Status Register(s) bitmap */
+static const struct pmc_bit_map cnp_pfear_map[] = {
+	{"PMC",                 BIT(0)},
+	{"OPI-DMI",             BIT(1)},
+	{"SPI/eSPI",            BIT(2)},
+	{"XHCI",                BIT(3)},
+	{"SPA",                 BIT(4)},
+	{"SPB",                 BIT(5)},
+	{"SPC",                 BIT(6)},
+	{"GBE",                 BIT(7)},
+
+	{"SATA",                BIT(0)},
+	{"HDA_PGD0",            BIT(1)},
+	{"HDA_PGD1",            BIT(2)},
+	{"HDA_PGD2",            BIT(3)},
+	{"HDA_PGD3",            BIT(4)},
+	{"SPD",                 BIT(5)},
+	{"LPSS",                BIT(6)},
+	{"LPC",                 BIT(7)},
+
+	{"SMB",                 BIT(0)},
+	{"ISH",                 BIT(1)},
+	{"P2SB",                BIT(2)},
+	{"NPK_VNN",             BIT(3)},
+	{"SDX",                 BIT(4)},
+	{"SPE",                 BIT(5)},
+	{"Fuse",                BIT(6)},
+	{"SBR8",		BIT(7)},
+
+	{"CSME_FSC",            BIT(0)},
+	{"USB3_OTG",            BIT(1)},
+	{"EXI",                 BIT(2)},
+	{"CSE",                 BIT(3)},
+	{"CSME_KVM",            BIT(4)},
+	{"CSME_PMT",            BIT(5)},
+	{"CSME_CLINK",          BIT(6)},
+	{"CSME_PTIO",           BIT(7)},
+
+	{"CSME_USBR",           BIT(0)},
+	{"CSME_SUSRAM",         BIT(1)},
+	{"CSME_SMT1",           BIT(2)},
+	{"CSME_SMT4",           BIT(3)},
+	{"CSME_SMS2",           BIT(4)},
+	{"CSME_SMS1",           BIT(5)},
+	{"CSME_RTC",            BIT(6)},
+	{"CSME_PSF",            BIT(7)},
+
+	{"SBR0",                BIT(0)},
+	{"SBR1",                BIT(1)},
+	{"SBR2",                BIT(2)},
+	{"SBR3",                BIT(3)},
+	{"SBR4",                BIT(4)},
+	{"SBR5",                BIT(5)},
+	{"CSME_PECI",           BIT(6)},
+	{"PSF1",                BIT(7)},
+
+	{"PSF2",                BIT(0)},
+	{"PSF3",                BIT(1)},
+	{"PSF4",                BIT(2)},
+	{"CNVI",                BIT(3)},
+	{"UFS0",                BIT(4)},
+	{"EMMC",                BIT(5)},
+	{"SPF",			BIT(6)},
+	{"SBR6",                BIT(7)},
+
+	{"SBR7",                BIT(0)},
+	{"NPK_AON",             BIT(1)},
+	{"HDA_PGD4",            BIT(2)},
+	{"HDA_PGD5",            BIT(3)},
+	{"HDA_PGD6",            BIT(4)},
+	{"PSF6",		BIT(5)},
+	{"PSF7",		BIT(6)},
+	{"PSF8",		BIT(7)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_cnp_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	cnp_pfear_map,
+	NULL
+};
+
+static const struct pmc_bit_map icl_pfear_map[] = {
+	{"RES_65",		BIT(0)},
+	{"RES_66",		BIT(1)},
+	{"RES_67",		BIT(2)},
+	{"TAM",			BIT(3)},
+	{"GBETSN",		BIT(4)},
+	{"TBTLSX",		BIT(5)},
+	{"RES_71",		BIT(6)},
+	{"RES_72",		BIT(7)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_icl_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of icl_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	cnp_pfear_map,
+	icl_pfear_map,
+	NULL
+};
+
+static const struct pmc_bit_map tgl_pfear_map[] = {
+	{"PSF9",		BIT(0)},
+	{"RES_66",		BIT(1)},
+	{"RES_67",		BIT(2)},
+	{"RES_68",		BIT(3)},
+	{"RES_69",		BIT(4)},
+	{"RES_70",		BIT(5)},
+	{"TBTLSX",		BIT(6)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_tgl_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of tgl_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	cnp_pfear_map,
+	tgl_pfear_map,
+	NULL
+};
+
+static const struct pmc_bit_map cnp_slps0_dbg0_map[] = {
+	{"AUDIO_D3",		BIT(0)},
+	{"OTG_D3",		BIT(1)},
+	{"XHCI_D3",		BIT(2)},
+	{"LPIO_D3",		BIT(3)},
+	{"SDX_D3",		BIT(4)},
+	{"SATA_D3",		BIT(5)},
+	{"UFS0_D3",		BIT(6)},
+	{"UFS1_D3",		BIT(7)},
+	{"EMMC_D3",		BIT(8)},
+	{}
+};
+
+static const struct pmc_bit_map cnp_slps0_dbg1_map[] = {
+	{"SDIO_PLL_OFF",	BIT(0)},
+	{"USB2_PLL_OFF",	BIT(1)},
+	{"AUDIO_PLL_OFF",	BIT(2)},
+	{"OC_PLL_OFF",		BIT(3)},
+	{"MAIN_PLL_OFF",	BIT(4)},
+	{"XOSC_OFF",		BIT(5)},
+	{"LPC_CLKS_GATED",	BIT(6)},
+	{"PCIE_CLKREQS_IDLE",	BIT(7)},
+	{"AUDIO_ROSC_OFF",	BIT(8)},
+	{"HPET_XOSC_CLK_REQ",	BIT(9)},
+	{"PMC_ROSC_SLOW_CLK",	BIT(10)},
+	{"AON2_ROSC_GATED",	BIT(11)},
+	{"CLKACKS_DEASSERTED",	BIT(12)},
+	{}
+};
+
+static const struct pmc_bit_map cnp_slps0_dbg2_map[] = {
+	{"MPHY_CORE_GATED",	BIT(0)},
+	{"CSME_GATED",		BIT(1)},
+	{"USB2_SUS_GATED",	BIT(2)},
+	{"DYN_FLEX_IO_IDLE",	BIT(3)},
+	{"GBE_NO_LINK",		BIT(4)},
+	{"THERM_SEN_DISABLED",	BIT(5)},
+	{"PCIE_LOW_POWER",	BIT(6)},
+	{"ISH_VNNAON_REQ_ACT",	BIT(7)},
+	{"ISH_VNN_REQ_ACT",	BIT(8)},
+	{"CNV_VNNAON_REQ_ACT",	BIT(9)},
+	{"CNV_VNN_REQ_ACT",	BIT(10)},
+	{"NPK_VNNON_REQ_ACT",	BIT(11)},
+	{"PMSYNC_STATE_IDLE",	BIT(12)},
+	{"ALST_GT_THRES",	BIT(13)},
+	{"PMC_ARC_PG_READY",	BIT(14)},
+	{}
+};
+
+static const struct pmc_bit_map *cnp_slps0_dbg_maps[] = {
+	cnp_slps0_dbg0_map,
+	cnp_slps0_dbg1_map,
+	cnp_slps0_dbg2_map,
+	NULL
+};
+
+static const struct pmc_bit_map cnp_ltr_show_map[] = {
+	{"SOUTHPORT_A",		CNP_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		CNP_PMC_LTR_SPB},
+	{"SATA",		CNP_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	CNP_PMC_LTR_GBE},
+	{"XHCI",		CNP_PMC_LTR_XHCI},
+	{"Reserved",		CNP_PMC_LTR_RESERVED},
+	{"ME",			CNP_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"EVA",			CNP_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		CNP_PMC_LTR_SPC},
+	{"HD_AUDIO",		CNP_PMC_LTR_AZ},
+	{"CNV",			CNP_PMC_LTR_CNV},
+	{"LPSS",		CNP_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		CNP_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		CNP_PMC_LTR_SPE},
+	{"CAMERA",		CNP_PMC_LTR_CAM},
+	{"ESPI",		CNP_PMC_LTR_ESPI},
+	{"SCC",			CNP_PMC_LTR_SCC},
+	{"ISH",			CNP_PMC_LTR_ISH},
+	{"UFSX2",		CNP_PMC_LTR_UFSX2},
+	{"EMMC",		CNP_PMC_LTR_EMMC},
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	{"WIGIG",		ICL_PMC_LTR_WIGIG},
+	{"THC0",                TGL_PMC_LTR_THC0},
+	{"THC1",                TGL_PMC_LTR_THC1},
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	CNP_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	CNP_PMC_LTR_CUR_ASLT},
+	{}
+};
+
+static const struct pmc_reg_map cnp_reg_map = {
+	.pfear_sts = ext_cnp_pfear_map,
+	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = SPT_PMC_SLP_S0_RES_COUNTER_STEP,
+	.slps0_dbg_maps = cnp_slps0_dbg_maps,
+	.ltr_show_sts = cnp_ltr_show_map,
+	.msr_sts = msr_map,
+	.slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = CNP_NUM_IP_IGN_ALLOWED,
+	.etr3_offset = ETR3_OFFSET,
+};
+
+static const struct pmc_reg_map icl_reg_map = {
+	.pfear_sts = ext_icl_pfear_map,
+	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = ICL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.slps0_dbg_maps = cnp_slps0_dbg_maps,
+	.ltr_show_sts = cnp_ltr_show_map,
+	.msr_sts = msr_map,
+	.slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = ICL_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = ICL_NUM_IP_IGN_ALLOWED,
+	.etr3_offset = ETR3_OFFSET,
+};
+
+static const struct pmc_bit_map tgl_clocksource_status_map[] = {
+	{"USB2PLL_OFF_STS",			BIT(18)},
+	{"PCIe/USB3.1_Gen2PLL_OFF_STS",		BIT(19)},
+	{"PCIe_Gen3PLL_OFF_STS",		BIT(20)},
+	{"OPIOPLL_OFF_STS",			BIT(21)},
+	{"OCPLL_OFF_STS",			BIT(22)},
+	{"MainPLL_OFF_STS",			BIT(23)},
+	{"MIPIPLL_OFF_STS",			BIT(24)},
+	{"Fast_XTAL_Osc_OFF_STS",		BIT(25)},
+	{"AC_Ring_Osc_OFF_STS",			BIT(26)},
+	{"MC_Ring_Osc_OFF_STS",			BIT(27)},
+	{"SATAPLL_OFF_STS",			BIT(29)},
+	{"XTAL_USB2PLL_OFF_STS",		BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_power_gating_status_map[] = {
+	{"CSME_PG_STS",				BIT(0)},
+	{"SATA_PG_STS",				BIT(1)},
+	{"xHCI_PG_STS",				BIT(2)},
+	{"UFSX2_PG_STS",			BIT(3)},
+	{"OTG_PG_STS",				BIT(5)},
+	{"SPA_PG_STS",				BIT(6)},
+	{"SPB_PG_STS",				BIT(7)},
+	{"SPC_PG_STS",				BIT(8)},
+	{"SPD_PG_STS",				BIT(9)},
+	{"SPE_PG_STS",				BIT(10)},
+	{"SPF_PG_STS",				BIT(11)},
+	{"LSX_PG_STS",				BIT(13)},
+	{"P2SB_PG_STS",				BIT(14)},
+	{"PSF_PG_STS",				BIT(15)},
+	{"SBR_PG_STS",				BIT(16)},
+	{"OPIDMI_PG_STS",			BIT(17)},
+	{"THC0_PG_STS",				BIT(18)},
+	{"THC1_PG_STS",				BIT(19)},
+	{"GBETSN_PG_STS",			BIT(20)},
+	{"GBE_PG_STS",				BIT(21)},
+	{"LPSS_PG_STS",				BIT(22)},
+	{"MMP_UFSX2_PG_STS",			BIT(23)},
+	{"MMP_UFSX2B_PG_STS",			BIT(24)},
+	{"FIA_PG_STS",				BIT(25)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_d3_status_map[] = {
+	{"ADSP_D3_STS",				BIT(0)},
+	{"SATA_D3_STS",				BIT(1)},
+	{"xHCI0_D3_STS",			BIT(2)},
+	{"xDCI1_D3_STS",			BIT(5)},
+	{"SDX_D3_STS",				BIT(6)},
+	{"EMMC_D3_STS",				BIT(7)},
+	{"IS_D3_STS",				BIT(8)},
+	{"THC0_D3_STS",				BIT(9)},
+	{"THC1_D3_STS",				BIT(10)},
+	{"GBE_D3_STS",				BIT(11)},
+	{"GBE_TSN_D3_STS",			BIT(12)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_vnn_req_status_map[] = {
+	{"GPIO_COM0_VNN_REQ_STS",		BIT(1)},
+	{"GPIO_COM1_VNN_REQ_STS",		BIT(2)},
+	{"GPIO_COM2_VNN_REQ_STS",		BIT(3)},
+	{"GPIO_COM3_VNN_REQ_STS",		BIT(4)},
+	{"GPIO_COM4_VNN_REQ_STS",		BIT(5)},
+	{"GPIO_COM5_VNN_REQ_STS",		BIT(6)},
+	{"Audio_VNN_REQ_STS",			BIT(7)},
+	{"ISH_VNN_REQ_STS",			BIT(8)},
+	{"CNVI_VNN_REQ_STS",			BIT(9)},
+	{"eSPI_VNN_REQ_STS",			BIT(10)},
+	{"Display_VNN_REQ_STS",			BIT(11)},
+	{"DTS_VNN_REQ_STS",			BIT(12)},
+	{"SMBUS_VNN_REQ_STS",			BIT(14)},
+	{"CSME_VNN_REQ_STS",			BIT(15)},
+	{"SMLINK0_VNN_REQ_STS",			BIT(16)},
+	{"SMLINK1_VNN_REQ_STS",			BIT(17)},
+	{"CLINK_VNN_REQ_STS",			BIT(20)},
+	{"DCI_VNN_REQ_STS",			BIT(21)},
+	{"ITH_VNN_REQ_STS",			BIT(22)},
+	{"CSME_VNN_REQ_STS",			BIT(24)},
+	{"GBE_VNN_REQ_STS",			BIT(25)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_vnn_misc_status_map[] = {
+	{"CPU_C10_REQ_STS_0",			BIT(0)},
+	{"PCIe_LPM_En_REQ_STS_3",		BIT(3)},
+	{"ITH_REQ_STS_5",			BIT(5)},
+	{"CNVI_REQ_STS_6",			BIT(6)},
+	{"ISH_REQ_STS_7",			BIT(7)},
+	{"USB2_SUS_PG_Sys_REQ_STS_10",		BIT(10)},
+	{"PCIe_Clk_REQ_STS_12",			BIT(12)},
+	{"MPHY_Core_DL_REQ_STS_16",		BIT(16)},
+	{"Break-even_En_REQ_STS_17",		BIT(17)},
+	{"Auto-demo_En_REQ_STS_18",		BIT(18)},
+	{"MPHY_SUS_REQ_STS_22",			BIT(22)},
+	{"xDCI_attached_REQ_STS_24",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map tgl_signal_status_map[] = {
+	{"LSX_Wake0_En_STS",			BIT(0)},
+	{"LSX_Wake0_Pol_STS",			BIT(1)},
+	{"LSX_Wake1_En_STS",			BIT(2)},
+	{"LSX_Wake1_Pol_STS",			BIT(3)},
+	{"LSX_Wake2_En_STS",			BIT(4)},
+	{"LSX_Wake2_Pol_STS",			BIT(5)},
+	{"LSX_Wake3_En_STS",			BIT(6)},
+	{"LSX_Wake3_Pol_STS",			BIT(7)},
+	{"LSX_Wake4_En_STS",			BIT(8)},
+	{"LSX_Wake4_Pol_STS",			BIT(9)},
+	{"LSX_Wake5_En_STS",			BIT(10)},
+	{"LSX_Wake5_Pol_STS",			BIT(11)},
+	{"LSX_Wake6_En_STS",			BIT(12)},
+	{"LSX_Wake6_Pol_STS",			BIT(13)},
+	{"LSX_Wake7_En_STS",			BIT(14)},
+	{"LSX_Wake7_Pol_STS",			BIT(15)},
+	{"Intel_Se_IO_Wake0_En_STS",		BIT(16)},
+	{"Intel_Se_IO_Wake0_Pol_STS",		BIT(17)},
+	{"Intel_Se_IO_Wake1_En_STS",		BIT(18)},
+	{"Intel_Se_IO_Wake1_Pol_STS",		BIT(19)},
+	{"Int_Timer_SS_Wake0_En_STS",		BIT(20)},
+	{"Int_Timer_SS_Wake0_Pol_STS",		BIT(21)},
+	{"Int_Timer_SS_Wake1_En_STS",		BIT(22)},
+	{"Int_Timer_SS_Wake1_Pol_STS",		BIT(23)},
+	{"Int_Timer_SS_Wake2_En_STS",		BIT(24)},
+	{"Int_Timer_SS_Wake2_Pol_STS",		BIT(25)},
+	{"Int_Timer_SS_Wake3_En_STS",		BIT(26)},
+	{"Int_Timer_SS_Wake3_Pol_STS",		BIT(27)},
+	{"Int_Timer_SS_Wake4_En_STS",		BIT(28)},
+	{"Int_Timer_SS_Wake4_Pol_STS",		BIT(29)},
+	{"Int_Timer_SS_Wake5_En_STS",		BIT(30)},
+	{"Int_Timer_SS_Wake5_Pol_STS",		BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map *tgl_lpm_maps[] = {
+	tgl_clocksource_status_map,
+	tgl_power_gating_status_map,
+	tgl_d3_status_map,
+	tgl_vnn_req_status_map,
+	tgl_vnn_misc_status_map,
+	tgl_signal_status_map,
+	NULL
+};
+
+static const struct pmc_reg_map tgl_reg_map = {
+	.pfear_sts = ext_tgl_pfear_map,
+	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.ltr_show_sts = cnp_ltr_show_map,
+	.msr_sts = msr_map,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = ICL_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = TGL_NUM_IP_IGN_ALLOWED,
+	.lpm_num_maps = TGL_LPM_NUM_MAPS,
+	.lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2,
+	.lpm_sts_latch_en_offset = TGL_LPM_STS_LATCH_EN_OFFSET,
+	.lpm_en_offset = TGL_LPM_EN_OFFSET,
+	.lpm_priority_offset = TGL_LPM_PRI_OFFSET,
+	.lpm_residency_offset = TGL_LPM_RESIDENCY_OFFSET,
+	.lpm_sts = tgl_lpm_maps,
+	.lpm_status_offset = TGL_LPM_STATUS_OFFSET,
+	.lpm_live_status_offset = TGL_LPM_LIVE_STATUS_OFFSET,
+	.etr3_offset = ETR3_OFFSET,
+};
+
+static void pmc_core_get_tgl_lpm_reqs(struct platform_device *pdev)
+{
+	struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
+	const int num_maps = pmcdev->map->lpm_num_maps;
+	u32 lpm_size = LPM_MAX_NUM_MODES * num_maps * 4;
+	union acpi_object *out_obj;
+	struct acpi_device *adev;
+	guid_t s0ix_dsm_guid;
+	u32 *lpm_req_regs, *addr;
+
+	adev = ACPI_COMPANION(&pdev->dev);
+	if (!adev)
+		return;
+
+	guid_parse(ACPI_S0IX_DSM_UUID, &s0ix_dsm_guid);
+
+	out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0,
+				    ACPI_GET_LOW_MODE_REGISTERS, NULL);
+	if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) {
+		u32 size = out_obj->buffer.length;
+
+		if (size != lpm_size) {
+			acpi_handle_debug(adev->handle,
+				"_DSM returned unexpected buffer size, have %u, expect %u\n",
+				size, lpm_size);
+			goto free_acpi_obj;
+		}
+	} else {
+		acpi_handle_debug(adev->handle,
+				  "_DSM function 0 evaluation failed\n");
+		goto free_acpi_obj;
+	}
+
+	addr = (u32 *)out_obj->buffer.pointer;
+
+	lpm_req_regs = devm_kzalloc(&pdev->dev, lpm_size * sizeof(u32),
+				     GFP_KERNEL);
+	if (!lpm_req_regs)
+		goto free_acpi_obj;
+
+	memcpy(lpm_req_regs, addr, lpm_size);
+	pmcdev->lpm_req_regs = lpm_req_regs;
+
+free_acpi_obj:
+	ACPI_FREE(out_obj);
+}
+
+/* Alder Lake: PGD PFET Enable Ack Status Register(s) bitmap */
+static const struct pmc_bit_map adl_pfear_map[] = {
+	{"SPI/eSPI",		BIT(2)},
+	{"XHCI",		BIT(3)},
+	{"SPA",			BIT(4)},
+	{"SPB",			BIT(5)},
+	{"SPC",			BIT(6)},
+	{"GBE",			BIT(7)},
+
+	{"SATA",		BIT(0)},
+	{"HDA_PGD0",		BIT(1)},
+	{"HDA_PGD1",		BIT(2)},
+	{"HDA_PGD2",		BIT(3)},
+	{"HDA_PGD3",		BIT(4)},
+	{"SPD",			BIT(5)},
+	{"LPSS",		BIT(6)},
+
+	{"SMB",			BIT(0)},
+	{"ISH",			BIT(1)},
+	{"ITH",			BIT(3)},
+
+	{"XDCI",		BIT(1)},
+	{"DCI",			BIT(2)},
+	{"CSE",			BIT(3)},
+	{"CSME_KVM",		BIT(4)},
+	{"CSME_PMT",		BIT(5)},
+	{"CSME_CLINK",		BIT(6)},
+	{"CSME_PTIO",		BIT(7)},
+
+	{"CSME_USBR",		BIT(0)},
+	{"CSME_SUSRAM",		BIT(1)},
+	{"CSME_SMT1",		BIT(2)},
+	{"CSME_SMS2",		BIT(4)},
+	{"CSME_SMS1",		BIT(5)},
+	{"CSME_RTC",		BIT(6)},
+	{"CSME_PSF",		BIT(7)},
+
+	{"CNVI",		BIT(3)},
+
+	{"HDA_PGD4",		BIT(2)},
+	{"HDA_PGD5",		BIT(3)},
+	{"HDA_PGD6",		BIT(4)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_adl_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	adl_pfear_map,
+	NULL
+};
+
+static const struct pmc_bit_map adl_ltr_show_map[] = {
+	{"SOUTHPORT_A",		CNP_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		CNP_PMC_LTR_SPB},
+	{"SATA",		CNP_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	CNP_PMC_LTR_GBE},
+	{"XHCI",		CNP_PMC_LTR_XHCI},
+	{"SOUTHPORT_F",		ADL_PMC_LTR_SPF},
+	{"ME",			CNP_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"SATA1",		CNP_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		CNP_PMC_LTR_SPC},
+	{"HD_AUDIO",		CNP_PMC_LTR_AZ},
+	{"CNV",			CNP_PMC_LTR_CNV},
+	{"LPSS",		CNP_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		CNP_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		CNP_PMC_LTR_SPE},
+	{"SATA2",		CNP_PMC_LTR_CAM},
+	{"ESPI",		CNP_PMC_LTR_ESPI},
+	{"SCC",			CNP_PMC_LTR_SCC},
+	{"ISH",			CNP_PMC_LTR_ISH},
+	{"UFSX2",		CNP_PMC_LTR_UFSX2},
+	{"EMMC",		CNP_PMC_LTR_EMMC},
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	{"WIGIG",		ICL_PMC_LTR_WIGIG},
+	{"THC0",		TGL_PMC_LTR_THC0},
+	{"THC1",		TGL_PMC_LTR_THC1},
+	{"SOUTHPORT_G",		CNP_PMC_LTR_RESERVED},
+
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	CNP_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	CNP_PMC_LTR_CUR_ASLT},
+	{}
+};
+
+static const struct pmc_bit_map adl_clocksource_status_map[] = {
+	{"CLKPART1_OFF_STS",			BIT(0)},
+	{"CLKPART2_OFF_STS",			BIT(1)},
+	{"CLKPART3_OFF_STS",			BIT(2)},
+	{"CLKPART4_OFF_STS",			BIT(3)},
+	{"CLKPART5_OFF_STS",			BIT(4)},
+	{"CLKPART6_OFF_STS",			BIT(5)},
+	{"CLKPART7_OFF_STS",			BIT(6)},
+	{"CLKPART8_OFF_STS",			BIT(7)},
+	{"PCIE0PLL_OFF_STS",			BIT(10)},
+	{"PCIE1PLL_OFF_STS",			BIT(11)},
+	{"PCIE2PLL_OFF_STS",			BIT(12)},
+	{"PCIE3PLL_OFF_STS",			BIT(13)},
+	{"PCIE4PLL_OFF_STS",			BIT(14)},
+	{"PCIE5PLL_OFF_STS",			BIT(15)},
+	{"PCIE6PLL_OFF_STS",			BIT(16)},
+	{"USB2PLL_OFF_STS",			BIT(18)},
+	{"OCPLL_OFF_STS",			BIT(22)},
+	{"AUDIOPLL_OFF_STS",			BIT(23)},
+	{"GBEPLL_OFF_STS",			BIT(24)},
+	{"Fast_XTAL_Osc_OFF_STS",		BIT(25)},
+	{"AC_Ring_Osc_OFF_STS",			BIT(26)},
+	{"MC_Ring_Osc_OFF_STS",			BIT(27)},
+	{"SATAPLL_OFF_STS",			BIT(29)},
+	{"USB3PLL_OFF_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_0_map[] = {
+	{"PMC_PGD0_PG_STS",			BIT(0)},
+	{"DMI_PGD0_PG_STS",			BIT(1)},
+	{"ESPISPI_PGD0_PG_STS",			BIT(2)},
+	{"XHCI_PGD0_PG_STS",			BIT(3)},
+	{"SPA_PGD0_PG_STS",			BIT(4)},
+	{"SPB_PGD0_PG_STS",			BIT(5)},
+	{"SPC_PGD0_PG_STS",			BIT(6)},
+	{"GBE_PGD0_PG_STS",			BIT(7)},
+	{"SATA_PGD0_PG_STS",			BIT(8)},
+	{"DSP_PGD0_PG_STS",			BIT(9)},
+	{"DSP_PGD1_PG_STS",			BIT(10)},
+	{"DSP_PGD2_PG_STS",			BIT(11)},
+	{"DSP_PGD3_PG_STS",			BIT(12)},
+	{"SPD_PGD0_PG_STS",			BIT(13)},
+	{"LPSS_PGD0_PG_STS",			BIT(14)},
+	{"SMB_PGD0_PG_STS",			BIT(16)},
+	{"ISH_PGD0_PG_STS",			BIT(17)},
+	{"NPK_PGD0_PG_STS",			BIT(19)},
+	{"PECI_PGD0_PG_STS",			BIT(21)},
+	{"XDCI_PGD0_PG_STS",			BIT(25)},
+	{"EXI_PGD0_PG_STS",			BIT(26)},
+	{"CSE_PGD0_PG_STS",			BIT(27)},
+	{"KVMCC_PGD0_PG_STS",			BIT(28)},
+	{"PMT_PGD0_PG_STS",			BIT(29)},
+	{"CLINK_PGD0_PG_STS",			BIT(30)},
+	{"PTIO_PGD0_PG_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_1_map[] = {
+	{"USBR0_PGD0_PG_STS",			BIT(0)},
+	{"SMT1_PGD0_PG_STS",			BIT(2)},
+	{"CSMERTC_PGD0_PG_STS",			BIT(6)},
+	{"CSMEPSF_PGD0_PG_STS",			BIT(7)},
+	{"CNVI_PGD0_PG_STS",			BIT(19)},
+	{"DSP_PGD4_PG_STS",			BIT(26)},
+	{"SPG_PGD0_PG_STS",			BIT(27)},
+	{"SPE_PGD0_PG_STS",			BIT(28)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_2_map[] = {
+	{"THC0_PGD0_PG_STS",			BIT(7)},
+	{"THC1_PGD0_PG_STS",			BIT(8)},
+	{"SPF_PGD0_PG_STS",			BIT(14)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_0_map[] = {
+	{"ISH_D3_STS",				BIT(2)},
+	{"LPSS_D3_STS",				BIT(3)},
+	{"XDCI_D3_STS",				BIT(4)},
+	{"XHCI_D3_STS",				BIT(5)},
+	{"SPA_D3_STS",				BIT(12)},
+	{"SPB_D3_STS",				BIT(13)},
+	{"SPC_D3_STS",				BIT(14)},
+	{"SPD_D3_STS",				BIT(15)},
+	{"SPE_D3_STS",				BIT(16)},
+	{"DSP_D3_STS",				BIT(19)},
+	{"SATA_D3_STS",				BIT(20)},
+	{"DMI_D3_STS",				BIT(22)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_1_map[] = {
+	{"GBE_D3_STS",				BIT(19)},
+	{"CNVI_D3_STS",				BIT(27)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_2_map[] = {
+	{"CSMERTC_D3_STS",			BIT(1)},
+	{"CSE_D3_STS",				BIT(4)},
+	{"KVMCC_D3_STS",			BIT(5)},
+	{"USBR0_D3_STS",			BIT(6)},
+	{"SMT1_D3_STS",				BIT(8)},
+	{"PTIO_D3_STS",				BIT(16)},
+	{"PMT_D3_STS",				BIT(17)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_3_map[] = {
+	{"THC0_D3_STS",				BIT(14)},
+	{"THC1_D3_STS",				BIT(15)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_0_map[] = {
+	{"ISH_VNN_REQ_STS",			BIT(2)},
+	{"ESPISPI_VNN_REQ_STS",			BIT(18)},
+	{"DSP_VNN_REQ_STS",			BIT(19)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_1_map[] = {
+	{"NPK_VNN_REQ_STS",			BIT(4)},
+	{"EXI_VNN_REQ_STS",			BIT(9)},
+	{"GBE_VNN_REQ_STS",			BIT(19)},
+	{"SMB_VNN_REQ_STS",			BIT(25)},
+	{"CNVI_VNN_REQ_STS",			BIT(27)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_2_map[] = {
+	{"CSMERTC_VNN_REQ_STS",			BIT(1)},
+	{"CSE_VNN_REQ_STS",			BIT(4)},
+	{"SMT1_VNN_REQ_STS",			BIT(8)},
+	{"CLINK_VNN_REQ_STS",			BIT(14)},
+	{"GPIOCOM4_VNN_REQ_STS",		BIT(20)},
+	{"GPIOCOM3_VNN_REQ_STS",		BIT(21)},
+	{"GPIOCOM2_VNN_REQ_STS",		BIT(22)},
+	{"GPIOCOM1_VNN_REQ_STS",		BIT(23)},
+	{"GPIOCOM0_VNN_REQ_STS",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_3_map[] = {
+	{"GPIOCOM5_VNN_REQ_STS",		BIT(11)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_misc_status_map[] = {
+	{"CPU_C10_REQ_STS",			BIT(0)},
+	{"PCIe_LPM_En_REQ_STS",			BIT(3)},
+	{"ITH_REQ_STS",				BIT(5)},
+	{"CNVI_REQ_STS",			BIT(6)},
+	{"ISH_REQ_STS",				BIT(7)},
+	{"USB2_SUS_PG_Sys_REQ_STS",		BIT(10)},
+	{"PCIe_Clk_REQ_STS",			BIT(12)},
+	{"MPHY_Core_DL_REQ_STS",		BIT(16)},
+	{"Break-even_En_REQ_STS",		BIT(17)},
+	{"MPHY_SUS_REQ_STS",			BIT(22)},
+	{"xDCI_attached_REQ_STS",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map *adl_lpm_maps[] = {
+	adl_clocksource_status_map,
+	adl_power_gating_status_0_map,
+	adl_power_gating_status_1_map,
+	adl_power_gating_status_2_map,
+	adl_d3_status_0_map,
+	adl_d3_status_1_map,
+	adl_d3_status_2_map,
+	adl_d3_status_3_map,
+	adl_vnn_req_status_0_map,
+	adl_vnn_req_status_1_map,
+	adl_vnn_req_status_2_map,
+	adl_vnn_req_status_3_map,
+	adl_vnn_misc_status_map,
+	tgl_signal_status_map,
+	NULL
+};
+
+static const struct pmc_reg_map adl_reg_map = {
+	.pfear_sts = ext_adl_pfear_map,
+	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.ltr_show_sts = adl_ltr_show_map,
+	.msr_sts = msr_map,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED,
+	.lpm_num_modes = ADL_LPM_NUM_MODES,
+	.lpm_num_maps = ADL_LPM_NUM_MAPS,
+	.lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2,
+	.etr3_offset = ETR3_OFFSET,
+	.lpm_sts_latch_en_offset = ADL_LPM_STATUS_LATCH_EN_OFFSET,
+	.lpm_priority_offset = ADL_LPM_PRI_OFFSET,
+	.lpm_en_offset = ADL_LPM_EN_OFFSET,
+	.lpm_residency_offset = ADL_LPM_RESIDENCY_OFFSET,
+	.lpm_sts = adl_lpm_maps,
+	.lpm_status_offset = ADL_LPM_STATUS_OFFSET,
+	.lpm_live_status_offset = ADL_LPM_LIVE_STATUS_OFFSET,
+};
+
+static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
+{
+	return readl(pmcdev->regbase + reg_offset);
+}
+
+static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int reg_offset,
+				      u32 val)
+{
+	writel(val, pmcdev->regbase + reg_offset);
+}
+
+static inline u64 pmc_core_adjust_slp_s0_step(struct pmc_dev *pmcdev, u32 value)
+{
+	/*
+	 * ADL PCH does not have the SLP_S0 counter and LPM Residency counters are
+	 * used as a workaround which uses 30.5 usec tick. All other client
+	 * programs have the legacy SLP_S0 residency counter that is using the 122
+	 * usec tick.
+	 */
+	const int lpm_adj_x2 = pmcdev->map->lpm_res_counter_step_x2;
+
+	if (pmcdev->map == &adl_reg_map)
+		return (u64)value * GET_X2_COUNTER((u64)lpm_adj_x2);
+	else
+		return (u64)value * pmcdev->map->slp_s0_res_counter_step;
+}
+
+static int set_etr3(struct pmc_dev *pmcdev)
+{
+	const struct pmc_reg_map *map = pmcdev->map;
+	u32 reg;
+	int err;
+
+	if (!map->etr3_offset)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&pmcdev->lock);
+
+	/* check if CF9 is locked */
+	reg = pmc_core_reg_read(pmcdev, map->etr3_offset);
+	if (reg & ETR3_CF9LOCK) {
+		err = -EACCES;
+		goto out_unlock;
+	}
+
+	/* write CF9 global reset bit */
+	reg |= ETR3_CF9GR;
+	pmc_core_reg_write(pmcdev, map->etr3_offset, reg);
+
+	reg = pmc_core_reg_read(pmcdev, map->etr3_offset);
+	if (!(reg & ETR3_CF9GR)) {
+		err = -EIO;
+		goto out_unlock;
+	}
+
+	err = 0;
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+	return err;
+}
+static umode_t etr3_is_visible(struct kobject *kobj,
+				struct attribute *attr,
+				int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+	const struct pmc_reg_map *map = pmcdev->map;
+	u32 reg;
+
+	mutex_lock(&pmcdev->lock);
+	reg = pmc_core_reg_read(pmcdev, map->etr3_offset);
+	mutex_unlock(&pmcdev->lock);
+
+	return reg & ETR3_CF9LOCK ? attr->mode & (SYSFS_PREALLOC | 0444) : attr->mode;
+}
+
+static ssize_t etr3_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+	const struct pmc_reg_map *map = pmcdev->map;
+	u32 reg;
+
+	if (!map->etr3_offset)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&pmcdev->lock);
+
+	reg = pmc_core_reg_read(pmcdev, map->etr3_offset);
+	reg &= ETR3_CF9GR | ETR3_CF9LOCK;
+
+	mutex_unlock(&pmcdev->lock);
+
+	return sysfs_emit(buf, "0x%08x", reg);
+}
+
+static ssize_t etr3_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t len)
+{
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+	int err;
+	u32 reg;
+
+	err = kstrtouint(buf, 16, &reg);
+	if (err)
+		return err;
+
+	/* allow only CF9 writes */
+	if (reg != ETR3_CF9GR)
+		return -EINVAL;
+
+	err = set_etr3(pmcdev);
+	if (err)
+		return err;
+
+	return len;
+}
+static DEVICE_ATTR_RW(etr3);
+
+static struct attribute *pmc_attrs[] = {
+	&dev_attr_etr3.attr,
+	NULL
+};
+
+static const struct attribute_group pmc_attr_group = {
+	.attrs = pmc_attrs,
+	.is_visible = etr3_is_visible,
+};
+
+static const struct attribute_group *pmc_dev_groups[] = {
+	&pmc_attr_group,
+	NULL
+};
+
+static int pmc_core_dev_state_get(void *data, u64 *val)
+{
+	struct pmc_dev *pmcdev = data;
+	const struct pmc_reg_map *map = pmcdev->map;
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, map->slp_s0_offset);
+	*val = pmc_core_adjust_slp_s0_step(pmcdev, value);
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(pmc_core_dev_state, pmc_core_dev_state_get, NULL, "%llu\n");
+
+static int pmc_core_check_read_lock_bit(struct pmc_dev *pmcdev)
+{
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, pmcdev->map->pm_cfg_offset);
+	return value & BIT(pmcdev->map->pm_read_disable_bit);
+}
+
+static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
+				   struct seq_file *s)
+{
+	const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
+	const struct pmc_bit_map *map;
+	int offset = pmcdev->map->slps0_dbg_offset;
+	u32 data;
+
+	while (*maps) {
+		map = *maps;
+		data = pmc_core_reg_read(pmcdev, offset);
+		offset += 4;
+		while (map->name) {
+			if (dev)
+				dev_info(dev, "SLP_S0_DBG: %-32s\tState: %s\n",
+					map->name,
+					data & map->bit_mask ? "Yes" : "No");
+			if (s)
+				seq_printf(s, "SLP_S0_DBG: %-32s\tState: %s\n",
+					   map->name,
+					   data & map->bit_mask ? "Yes" : "No");
+			++map;
+		}
+		++maps;
+	}
+}
+
+static int pmc_core_lpm_get_arr_size(const struct pmc_bit_map **maps)
+{
+	int idx;
+
+	for (idx = 0; maps[idx]; idx++)
+		;/* Nothing */
+
+	return idx;
+}
+
+static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
+				 struct seq_file *s, u32 offset,
+				 const char *str,
+				 const struct pmc_bit_map **maps)
+{
+	int index, idx, len = 32, bit_mask, arr_size;
+	u32 *lpm_regs;
+
+	arr_size = pmc_core_lpm_get_arr_size(maps);
+	lpm_regs = kmalloc_array(arr_size, sizeof(*lpm_regs), GFP_KERNEL);
+	if (!lpm_regs)
+		return;
+
+	for (index = 0; index < arr_size; index++) {
+		lpm_regs[index] = pmc_core_reg_read(pmcdev, offset);
+		offset += 4;
+	}
+
+	for (idx = 0; idx < arr_size; idx++) {
+		if (dev)
+			dev_info(dev, "\nLPM_%s_%d:\t0x%x\n", str, idx,
+				lpm_regs[idx]);
+		if (s)
+			seq_printf(s, "\nLPM_%s_%d:\t0x%x\n", str, idx,
+				   lpm_regs[idx]);
+		for (index = 0; maps[idx][index].name && index < len; index++) {
+			bit_mask = maps[idx][index].bit_mask;
+			if (dev)
+				dev_info(dev, "%-30s %-30d\n",
+					maps[idx][index].name,
+					lpm_regs[idx] & bit_mask ? 1 : 0);
+			if (s)
+				seq_printf(s, "%-30s %-30d\n",
+					   maps[idx][index].name,
+					   lpm_regs[idx] & bit_mask ? 1 : 0);
+		}
+	}
+
+	kfree(lpm_regs);
+}
+
+static bool slps0_dbg_latch;
+
+static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
+{
+	return readb(pmcdev->regbase + offset);
+}
+
+static void pmc_core_display_map(struct seq_file *s, int index, int idx, int ip,
+				 u8 pf_reg, const struct pmc_bit_map **pf_map)
+{
+	seq_printf(s, "PCH IP: %-2d - %-32s\tState: %s\n",
+		   ip, pf_map[idx][index].name,
+		   pf_map[idx][index].bit_mask & pf_reg ? "Off" : "On");
+}
+
+static int pmc_core_ppfear_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map **maps = pmcdev->map->pfear_sts;
+	u8 pf_regs[PPFEAR_MAX_NUM_ENTRIES];
+	int index, iter, idx, ip = 0;
+
+	iter = pmcdev->map->ppfear0_offset;
+
+	for (index = 0; index < pmcdev->map->ppfear_buckets &&
+	     index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
+		pf_regs[index] = pmc_core_reg_read_byte(pmcdev, iter);
+
+	for (idx = 0; maps[idx]; idx++) {
+		for (index = 0; maps[idx][index].name &&
+		     index < pmcdev->map->ppfear_buckets * 8; ip++, index++)
+			pmc_core_display_map(s, index, idx, ip,
+					     pf_regs[index / 8], maps);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_ppfear);
+
+/* This function should return link status, 0 means ready */
+static int pmc_core_mtpmc_link_status(struct pmc_dev *pmcdev)
+{
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, SPT_PMC_PM_STS_OFFSET);
+	return value & BIT(SPT_PMC_MSG_FULL_STS_BIT);
+}
+
+static int pmc_core_send_msg(struct pmc_dev *pmcdev, u32 *addr_xram)
+{
+	u32 dest;
+	int timeout;
+
+	for (timeout = NUM_RETRIES; timeout > 0; timeout--) {
+		if (pmc_core_mtpmc_link_status(pmcdev) == 0)
+			break;
+		msleep(5);
+	}
+
+	if (timeout <= 0 && pmc_core_mtpmc_link_status(pmcdev))
+		return -EBUSY;
+
+	dest = (*addr_xram & MTPMC_MASK) | (1U << 1);
+	pmc_core_reg_write(pmcdev, SPT_PMC_MTPMC_OFFSET, dest);
+	return 0;
+}
+
+static int pmc_core_mphy_pg_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->mphy_sts;
+	u32 mphy_core_reg_low, mphy_core_reg_high;
+	u32 val_low, val_high;
+	int index, err = 0;
+
+	if (pmcdev->pmc_xram_read_bit) {
+		seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS.");
+		return 0;
+	}
+
+	mphy_core_reg_low  = (SPT_PMC_MPHY_CORE_STS_0 << 16);
+	mphy_core_reg_high = (SPT_PMC_MPHY_CORE_STS_1 << 16);
+
+	mutex_lock(&pmcdev->lock);
+
+	if (pmc_core_send_msg(pmcdev, &mphy_core_reg_low) != 0) {
+		err = -EBUSY;
+		goto out_unlock;
+	}
+
+	msleep(10);
+	val_low = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
+
+	if (pmc_core_send_msg(pmcdev, &mphy_core_reg_high) != 0) {
+		err = -EBUSY;
+		goto out_unlock;
+	}
+
+	msleep(10);
+	val_high = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
+
+	for (index = 0; index < 8 && map[index].name; index++) {
+		seq_printf(s, "%-32s\tState: %s\n",
+			   map[index].name,
+			   map[index].bit_mask & val_low ? "Not power gated" :
+			   "Power gated");
+	}
+
+	for (index = 8; map[index].name; index++) {
+		seq_printf(s, "%-32s\tState: %s\n",
+			   map[index].name,
+			   map[index].bit_mask & val_high ? "Not power gated" :
+			   "Power gated");
+	}
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+	return err;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_mphy_pg);
+
+static int pmc_core_pll_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->pll_sts;
+	u32 mphy_common_reg, val;
+	int index, err = 0;
+
+	if (pmcdev->pmc_xram_read_bit) {
+		seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS.");
+		return 0;
+	}
+
+	mphy_common_reg  = (SPT_PMC_MPHY_COM_STS_0 << 16);
+	mutex_lock(&pmcdev->lock);
+
+	if (pmc_core_send_msg(pmcdev, &mphy_common_reg) != 0) {
+		err = -EBUSY;
+		goto out_unlock;
+	}
+
+	/* Observed PMC HW response latency for MTPMC-MFPMC is ~10 ms */
+	msleep(10);
+	val = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
+
+	for (index = 0; map[index].name ; index++) {
+		seq_printf(s, "%-32s\tState: %s\n",
+			   map[index].name,
+			   map[index].bit_mask & val ? "Active" : "Idle");
+	}
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+	return err;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
+
+static int pmc_core_send_ltr_ignore(struct pmc_dev *pmcdev, u32 value)
+{
+	const struct pmc_reg_map *map = pmcdev->map;
+	u32 reg;
+	int err = 0;
+
+	mutex_lock(&pmcdev->lock);
+
+	if (value > map->ltr_ignore_max) {
+		err = -EINVAL;
+		goto out_unlock;
+	}
+
+	reg = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
+	reg |= BIT(value);
+	pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, reg);
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+
+	return err;
+}
+
+static ssize_t pmc_core_ltr_ignore_write(struct file *file,
+					 const char __user *userbuf,
+					 size_t count, loff_t *ppos)
+{
+	struct seq_file *s = file->private_data;
+	struct pmc_dev *pmcdev = s->private;
+	u32 buf_size, value;
+	int err;
+
+	buf_size = min_t(u32, count, 64);
+
+	err = kstrtou32_from_user(userbuf, buf_size, 10, &value);
+	if (err)
+		return err;
+
+	err = pmc_core_send_ltr_ignore(pmcdev, value);
+
+	return err == 0 ? count : err;
+}
+
+static int pmc_core_ltr_ignore_show(struct seq_file *s, void *unused)
+{
+	return 0;
+}
+
+static int pmc_core_ltr_ignore_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmc_core_ltr_ignore_show, inode->i_private);
+}
+
+static const struct file_operations pmc_core_ltr_ignore_ops = {
+	.open           = pmc_core_ltr_ignore_open,
+	.read           = seq_read,
+	.write          = pmc_core_ltr_ignore_write,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static void pmc_core_slps0_dbg_latch(struct pmc_dev *pmcdev, bool reset)
+{
+	const struct pmc_reg_map *map = pmcdev->map;
+	u32 fd;
+
+	mutex_lock(&pmcdev->lock);
+
+	if (!reset && !slps0_dbg_latch)
+		goto out_unlock;
+
+	fd = pmc_core_reg_read(pmcdev, map->slps0_dbg_offset);
+	if (reset)
+		fd &= ~CNP_PMC_LATCH_SLPS0_EVENTS;
+	else
+		fd |= CNP_PMC_LATCH_SLPS0_EVENTS;
+	pmc_core_reg_write(pmcdev, map->slps0_dbg_offset, fd);
+
+	slps0_dbg_latch = false;
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+}
+
+static int pmc_core_slps0_dbg_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+
+	pmc_core_slps0_dbg_latch(pmcdev, false);
+	pmc_core_slps0_display(pmcdev, NULL, s);
+	pmc_core_slps0_dbg_latch(pmcdev, true);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_slps0_dbg);
+
+static u32 convert_ltr_scale(u32 val)
+{
+	/*
+	 * As per PCIE specification supporting document
+	 * ECN_LatencyTolnReporting_14Aug08.pdf the Latency
+	 * Tolerance Reporting data payload is encoded in a
+	 * 3 bit scale and 10 bit value fields. Values are
+	 * multiplied by the indicated scale to yield an absolute time
+	 * value, expressible in a range from 1 nanosecond to
+	 * 2^25*(2^10-1) = 34,326,183,936 nanoseconds.
+	 *
+	 * scale encoding is as follows:
+	 *
+	 * ----------------------------------------------
+	 * |scale factor	|	Multiplier (ns)	|
+	 * ----------------------------------------------
+	 * |	0		|	1		|
+	 * |	1		|	32		|
+	 * |	2		|	1024		|
+	 * |	3		|	32768		|
+	 * |	4		|	1048576		|
+	 * |	5		|	33554432	|
+	 * |	6		|	Invalid		|
+	 * |	7		|	Invalid		|
+	 * ----------------------------------------------
+	 */
+	if (val > 5) {
+		pr_warn("Invalid LTR scale factor.\n");
+		return 0;
+	}
+
+	return 1U << (5 * val);
+}
+
+static int pmc_core_ltr_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->ltr_show_sts;
+	u64 decoded_snoop_ltr, decoded_non_snoop_ltr;
+	u32 ltr_raw_data, scale, val;
+	u16 snoop_ltr, nonsnoop_ltr;
+	int index;
+
+	for (index = 0; map[index].name ; index++) {
+		decoded_snoop_ltr = decoded_non_snoop_ltr = 0;
+		ltr_raw_data = pmc_core_reg_read(pmcdev,
+						 map[index].bit_mask);
+		snoop_ltr = ltr_raw_data & ~MTPMC_MASK;
+		nonsnoop_ltr = (ltr_raw_data >> 0x10) & ~MTPMC_MASK;
+
+		if (FIELD_GET(LTR_REQ_NONSNOOP, ltr_raw_data)) {
+			scale = FIELD_GET(LTR_DECODED_SCALE, nonsnoop_ltr);
+			val = FIELD_GET(LTR_DECODED_VAL, nonsnoop_ltr);
+			decoded_non_snoop_ltr = val * convert_ltr_scale(scale);
+		}
+
+		if (FIELD_GET(LTR_REQ_SNOOP, ltr_raw_data)) {
+			scale = FIELD_GET(LTR_DECODED_SCALE, snoop_ltr);
+			val = FIELD_GET(LTR_DECODED_VAL, snoop_ltr);
+			decoded_snoop_ltr = val * convert_ltr_scale(scale);
+		}
+
+		seq_printf(s, "%-32s\tLTR: RAW: 0x%-16x\tNon-Snoop(ns): %-16llu\tSnoop(ns): %-16llu\n",
+			   map[index].name, ltr_raw_data,
+			   decoded_non_snoop_ltr,
+			   decoded_snoop_ltr);
+	}
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_ltr);
+
+static inline u64 adjust_lpm_residency(struct pmc_dev *pmcdev, u32 offset,
+				       const int lpm_adj_x2)
+{
+	u64 lpm_res = pmc_core_reg_read(pmcdev, offset);
+
+	return GET_X2_COUNTER((u64)lpm_adj_x2 * lpm_res);
+}
+
+static int pmc_core_substate_res_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const int lpm_adj_x2 = pmcdev->map->lpm_res_counter_step_x2;
+	u32 offset = pmcdev->map->lpm_residency_offset;
+	int i, mode;
+
+	seq_printf(s, "%-10s %-15s\n", "Substate", "Residency");
+
+	pmc_for_each_mode(i, mode, pmcdev) {
+		seq_printf(s, "%-10s %-15llu\n", pmc_lpm_modes[mode],
+			   adjust_lpm_residency(pmcdev, offset + (4 * mode), lpm_adj_x2));
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_res);
+
+static int pmc_core_substate_sts_regs_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	u32 offset = pmcdev->map->lpm_status_offset;
+
+	pmc_core_lpm_display(pmcdev, NULL, s, offset, "STATUS", maps);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_sts_regs);
+
+static int pmc_core_substate_l_sts_regs_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	u32 offset = pmcdev->map->lpm_live_status_offset;
+
+	pmc_core_lpm_display(pmcdev, NULL, s, offset, "LIVE_STATUS", maps);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_l_sts_regs);
+
+static void pmc_core_substate_req_header_show(struct seq_file *s)
+{
+	struct pmc_dev *pmcdev = s->private;
+	int i, mode;
+
+	seq_printf(s, "%30s |", "Element");
+	pmc_for_each_mode(i, mode, pmcdev)
+		seq_printf(s, " %9s |", pmc_lpm_modes[mode]);
+
+	seq_printf(s, " %9s |\n", "Status");
+}
+
+static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	const struct pmc_bit_map *map;
+	const int num_maps = pmcdev->map->lpm_num_maps;
+	u32 sts_offset = pmcdev->map->lpm_status_offset;
+	u32 *lpm_req_regs = pmcdev->lpm_req_regs;
+	int mp;
+
+	/* Display the header */
+	pmc_core_substate_req_header_show(s);
+
+	/* Loop over maps */
+	for (mp = 0; mp < num_maps; mp++) {
+		u32 req_mask = 0;
+		u32 lpm_status;
+		int mode, idx, i, len = 32;
+
+		/*
+		 * Capture the requirements and create a mask so that we only
+		 * show an element if it's required for at least one of the
+		 * enabled low power modes
+		 */
+		pmc_for_each_mode(idx, mode, pmcdev)
+			req_mask |= lpm_req_regs[mp + (mode * num_maps)];
+
+		/* Get the last latched status for this map */
+		lpm_status = pmc_core_reg_read(pmcdev, sts_offset + (mp * 4));
+
+		/*  Loop over elements in this map */
+		map = maps[mp];
+		for (i = 0; map[i].name && i < len; i++) {
+			u32 bit_mask = map[i].bit_mask;
+
+			if (!(bit_mask & req_mask))
+				/*
+				 * Not required for any enabled states
+				 * so don't display
+				 */
+				continue;
+
+			/* Display the element name in the first column */
+			seq_printf(s, "%30s |", map[i].name);
+
+			/* Loop over the enabled states and display if required */
+			pmc_for_each_mode(idx, mode, pmcdev) {
+				if (lpm_req_regs[mp + (mode * num_maps)] & bit_mask)
+					seq_printf(s, " %9s |",
+						   "Required");
+				else
+					seq_printf(s, " %9s |", " ");
+			}
+
+			/* In Status column, show the last captured state of this agent */
+			if (lpm_status & bit_mask)
+				seq_printf(s, " %9s |", "Yes");
+			else
+				seq_printf(s, " %9s |", " ");
+
+			seq_puts(s, "\n");
+		}
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_req_regs);
+
+static int pmc_core_lpm_latch_mode_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	bool c10;
+	u32 reg;
+	int idx, mode;
+
+	reg = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_sts_latch_en_offset);
+	if (reg & LPM_STS_LATCH_MODE) {
+		seq_puts(s, "c10");
+		c10 = false;
+	} else {
+		seq_puts(s, "[c10]");
+		c10 = true;
+	}
+
+	pmc_for_each_mode(idx, mode, pmcdev) {
+		if ((BIT(mode) & reg) && !c10)
+			seq_printf(s, " [%s]", pmc_lpm_modes[mode]);
+		else
+			seq_printf(s, " %s", pmc_lpm_modes[mode]);
+	}
+
+	seq_puts(s, " clear\n");
+
+	return 0;
+}
+
+static ssize_t pmc_core_lpm_latch_mode_write(struct file *file,
+					     const char __user *userbuf,
+					     size_t count, loff_t *ppos)
+{
+	struct seq_file *s = file->private_data;
+	struct pmc_dev *pmcdev = s->private;
+	bool clear = false, c10 = false;
+	unsigned char buf[8];
+	int idx, m, mode;
+	u32 reg;
+
+	if (count > sizeof(buf) - 1)
+		return -EINVAL;
+	if (copy_from_user(buf, userbuf, count))
+		return -EFAULT;
+	buf[count] = '\0';
+
+	/*
+	 * Allowed strings are:
+	 *	Any enabled substate, e.g. 'S0i2.0'
+	 *	'c10'
+	 *	'clear'
+	 */
+	mode = sysfs_match_string(pmc_lpm_modes, buf);
+
+	/* Check string matches enabled mode */
+	pmc_for_each_mode(idx, m, pmcdev)
+		if (mode == m)
+			break;
+
+	if (mode != m || mode < 0) {
+		if (sysfs_streq(buf, "clear"))
+			clear = true;
+		else if (sysfs_streq(buf, "c10"))
+			c10 = true;
+		else
+			return -EINVAL;
+	}
+
+	if (clear) {
+		mutex_lock(&pmcdev->lock);
+
+		reg = pmc_core_reg_read(pmcdev, pmcdev->map->etr3_offset);
+		reg |= ETR3_CLEAR_LPM_EVENTS;
+		pmc_core_reg_write(pmcdev, pmcdev->map->etr3_offset, reg);
+
+		mutex_unlock(&pmcdev->lock);
+
+		return count;
+	}
+
+	if (c10) {
+		mutex_lock(&pmcdev->lock);
+
+		reg = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_sts_latch_en_offset);
+		reg &= ~LPM_STS_LATCH_MODE;
+		pmc_core_reg_write(pmcdev, pmcdev->map->lpm_sts_latch_en_offset, reg);
+
+		mutex_unlock(&pmcdev->lock);
+
+		return count;
+	}
+
+	/*
+	 * For LPM mode latching we set the latch enable bit and selected mode
+	 * and clear everything else.
+	 */
+	reg = LPM_STS_LATCH_MODE | BIT(mode);
+	mutex_lock(&pmcdev->lock);
+	pmc_core_reg_write(pmcdev, pmcdev->map->lpm_sts_latch_en_offset, reg);
+	mutex_unlock(&pmcdev->lock);
+
+	return count;
+}
+DEFINE_PMC_CORE_ATTR_WRITE(pmc_core_lpm_latch_mode);
+
+static int pmc_core_pkgc_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->msr_sts;
+	u64 pcstate_count;
+	int index;
+
+	for (index = 0; map[index].name ; index++) {
+		if (rdmsrl_safe(map[index].bit_mask, &pcstate_count))
+			continue;
+
+		pcstate_count *= 1000;
+		do_div(pcstate_count, tsc_khz);
+		seq_printf(s, "%-8s : %llu\n", map[index].name,
+			   pcstate_count);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_pkgc);
+
+static bool pmc_core_pri_verify(u32 lpm_pri, u8 *mode_order)
+{
+	int i, j;
+
+	if (!lpm_pri)
+		return false;
+	/*
+	 * Each byte contains the priority level for 2 modes (7:4 and 3:0).
+	 * In a 32 bit register this allows for describing 8 modes. Store the
+	 * levels and look for values out of range.
+	 */
+	for (i = 0; i < 8; i++) {
+		int level = lpm_pri & GENMASK(3, 0);
+
+		if (level >= LPM_MAX_NUM_MODES)
+			return false;
+
+		mode_order[i] = level;
+		lpm_pri >>= 4;
+	}
+
+	/* Check that we have unique values */
+	for (i = 0; i < LPM_MAX_NUM_MODES - 1; i++)
+		for (j = i + 1; j < LPM_MAX_NUM_MODES; j++)
+			if (mode_order[i] == mode_order[j])
+				return false;
+
+	return true;
+}
+
+static void pmc_core_get_low_power_modes(struct platform_device *pdev)
+{
+	struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
+	u8 pri_order[LPM_MAX_NUM_MODES] = LPM_DEFAULT_PRI;
+	u8 mode_order[LPM_MAX_NUM_MODES];
+	u32 lpm_pri;
+	u32 lpm_en;
+	int mode, i, p;
+
+	/* Use LPM Maps to indicate support for substates */
+	if (!pmcdev->map->lpm_num_maps)
+		return;
+
+	lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset);
+	pmcdev->num_lpm_modes = hweight32(lpm_en);
+
+	/* Read 32 bit LPM_PRI register */
+	lpm_pri = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_priority_offset);
+
+
+	/*
+	 * If lpm_pri value passes verification, then override the default
+	 * modes here. Otherwise stick with the default.
+	 */
+	if (pmc_core_pri_verify(lpm_pri, mode_order))
+		/* Get list of modes in priority order */
+		for (mode = 0; mode < LPM_MAX_NUM_MODES; mode++)
+			pri_order[mode_order[mode]] = mode;
+	else
+		dev_warn(&pdev->dev, "Assuming a default substate order for this platform\n");
+
+	/*
+	 * Loop through all modes from lowest to highest priority,
+	 * and capture all enabled modes in order
+	 */
+	i = 0;
+	for (p = LPM_MAX_NUM_MODES - 1; p >= 0; p--) {
+		int mode = pri_order[p];
+
+		if (!(BIT(mode) & lpm_en))
+			continue;
+
+		pmcdev->lpm_en_modes[i++] = mode;
+	}
+}
+
+static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
+{
+	debugfs_remove_recursive(pmcdev->dbgfs_dir);
+}
+
+static void pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
+{
+	struct dentry *dir;
+
+	dir = debugfs_create_dir("pmc_core", NULL);
+	pmcdev->dbgfs_dir = dir;
+
+	debugfs_create_file("slp_s0_residency_usec", 0444, dir, pmcdev,
+			    &pmc_core_dev_state);
+
+	if (pmcdev->map->pfear_sts)
+		debugfs_create_file("pch_ip_power_gating_status", 0444, dir,
+				    pmcdev, &pmc_core_ppfear_fops);
+
+	debugfs_create_file("ltr_ignore", 0644, dir, pmcdev,
+			    &pmc_core_ltr_ignore_ops);
+
+	debugfs_create_file("ltr_show", 0444, dir, pmcdev, &pmc_core_ltr_fops);
+
+	debugfs_create_file("package_cstate_show", 0444, dir, pmcdev,
+			    &pmc_core_pkgc_fops);
+
+	if (pmcdev->map->pll_sts)
+		debugfs_create_file("pll_status", 0444, dir, pmcdev,
+				    &pmc_core_pll_fops);
+
+	if (pmcdev->map->mphy_sts)
+		debugfs_create_file("mphy_core_lanes_power_gating_status",
+				    0444, dir, pmcdev,
+				    &pmc_core_mphy_pg_fops);
+
+	if (pmcdev->map->slps0_dbg_maps) {
+		debugfs_create_file("slp_s0_debug_status", 0444,
+				    dir, pmcdev,
+				    &pmc_core_slps0_dbg_fops);
+
+		debugfs_create_bool("slp_s0_dbg_latch", 0644,
+				    dir, &slps0_dbg_latch);
+	}
+
+	if (pmcdev->map->lpm_en_offset) {
+		debugfs_create_file("substate_residencies", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_res_fops);
+	}
+
+	if (pmcdev->map->lpm_status_offset) {
+		debugfs_create_file("substate_status_registers", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_sts_regs_fops);
+		debugfs_create_file("substate_live_status_registers", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_l_sts_regs_fops);
+		debugfs_create_file("lpm_latch_mode", 0644,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_lpm_latch_mode_fops);
+	}
+
+	if (pmcdev->lpm_req_regs) {
+		debugfs_create_file("substate_requirements", 0444,
+				    pmcdev->dbgfs_dir, pmcdev,
+				    &pmc_core_substate_req_regs_fops);
+	}
+}
+
+static const struct x86_cpu_id intel_pmc_core_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L,		&spt_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE,		&spt_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		&spt_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		&spt_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L,	&cnp_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&icl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_NNPI,	&icl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE,		&cnp_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L,		&cnp_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&icl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		&adl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P,        &tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE,		&adl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S,	&adl_reg_map),
+	{}
+};
+
+MODULE_DEVICE_TABLE(x86cpu, intel_pmc_core_ids);
+
+static const struct pci_device_id pmc_pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID) },
+	{ }
+};
+
+/*
+ * This quirk can be used on those platforms where
+ * the platform BIOS enforces 24Mhz crystal to shutdown
+ * before PMC can assert SLP_S0#.
+ */
+static bool xtal_ignore;
+static int quirk_xtal_ignore(const struct dmi_system_id *id)
+{
+	xtal_ignore = true;
+	return 0;
+}
+
+static void pmc_core_xtal_ignore(struct pmc_dev *pmcdev)
+{
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, pmcdev->map->pm_vric1_offset);
+	/* 24MHz Crystal Shutdown Qualification Disable */
+	value |= SPT_PMC_VRIC1_XTALSDQDIS;
+	/* Low Voltage Mode Enable */
+	value &= ~SPT_PMC_VRIC1_SLPS0LVEN;
+	pmc_core_reg_write(pmcdev, pmcdev->map->pm_vric1_offset, value);
+}
+
+static const struct dmi_system_id pmc_core_dmi_table[]  = {
+	{
+	.callback = quirk_xtal_ignore,
+	.ident = "HP Elite x2 1013 G3",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Elite x2 1013 G3"),
+		},
+	},
+	{}
+};
+
+static void pmc_core_do_dmi_quirks(struct pmc_dev *pmcdev)
+{
+	dmi_check_system(pmc_core_dmi_table);
+
+	if (xtal_ignore)
+		pmc_core_xtal_ignore(pmcdev);
+}
+
+static int pmc_core_probe(struct platform_device *pdev)
+{
+	static bool device_initialized;
+	struct pmc_dev *pmcdev;
+	const struct x86_cpu_id *cpu_id;
+	u64 slp_s0_addr;
+
+	if (device_initialized)
+		return -ENODEV;
+
+	pmcdev = devm_kzalloc(&pdev->dev, sizeof(*pmcdev), GFP_KERNEL);
+	if (!pmcdev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pmcdev);
+
+	cpu_id = x86_match_cpu(intel_pmc_core_ids);
+	if (!cpu_id)
+		return -ENODEV;
+
+	pmcdev->map = (struct pmc_reg_map *)cpu_id->driver_data;
+
+	/*
+	 * Coffee Lake has CPU ID of Kaby Lake and Cannon Lake PCH. So here
+	 * Sunrisepoint PCH regmap can't be used. Use Cannon Lake PCH regmap
+	 * in this case.
+	 */
+	if (pmcdev->map == &spt_reg_map && !pci_dev_present(pmc_pci_ids))
+		pmcdev->map = &cnp_reg_map;
+
+	if (lpit_read_residency_count_address(&slp_s0_addr)) {
+		pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT;
+
+		if (page_is_ram(PHYS_PFN(pmcdev->base_addr)))
+			return -ENODEV;
+	} else {
+		pmcdev->base_addr = slp_s0_addr - pmcdev->map->slp_s0_offset;
+	}
+
+	pmcdev->regbase = ioremap(pmcdev->base_addr,
+				  pmcdev->map->regmap_length);
+	if (!pmcdev->regbase)
+		return -ENOMEM;
+
+	mutex_init(&pmcdev->lock);
+
+	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(pmcdev);
+	pmc_core_get_low_power_modes(pdev);
+	pmc_core_do_dmi_quirks(pmcdev);
+
+	if (pmcdev->map == &tgl_reg_map)
+		pmc_core_get_tgl_lpm_reqs(pdev);
+
+	/*
+	 * On TGL and ADL, due to a hardware limitation, the GBE LTR blocks PC10
+	 * when a cable is attached. Tell the PMC to ignore it.
+	 */
+	if (pmcdev->map == &tgl_reg_map || pmcdev->map == &adl_reg_map) {
+		dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
+		pmc_core_send_ltr_ignore(pmcdev, 3);
+	}
+
+	pmc_core_dbgfs_register(pmcdev);
+
+	device_initialized = true;
+	dev_info(&pdev->dev, " initialized\n");
+
+	return 0;
+}
+
+static int pmc_core_remove(struct platform_device *pdev)
+{
+	struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
+
+	pmc_core_dbgfs_unregister(pmcdev);
+	platform_set_drvdata(pdev, NULL);
+	mutex_destroy(&pmcdev->lock);
+	iounmap(pmcdev->regbase);
+	return 0;
+}
+
+static bool warn_on_s0ix_failures;
+module_param(warn_on_s0ix_failures, bool, 0644);
+MODULE_PARM_DESC(warn_on_s0ix_failures, "Check and warn for S0ix failures");
+
+static __maybe_unused int pmc_core_suspend(struct device *dev)
+{
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+
+	pmcdev->check_counters = false;
+
+	/* No warnings on S0ix failures */
+	if (!warn_on_s0ix_failures)
+		return 0;
+
+	/* Check if the syspend will actually use S0ix */
+	if (pm_suspend_via_firmware())
+		return 0;
+
+	/* Save PC10 residency for checking later */
+	if (rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pmcdev->pc10_counter))
+		return -EIO;
+
+	/* Save S0ix residency for checking later */
+	if (pmc_core_dev_state_get(pmcdev, &pmcdev->s0ix_counter))
+		return -EIO;
+
+	pmcdev->check_counters = true;
+	return 0;
+}
+
+static inline bool pmc_core_is_pc10_failed(struct pmc_dev *pmcdev)
+{
+	u64 pc10_counter;
+
+	if (rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pc10_counter))
+		return false;
+
+	if (pc10_counter == pmcdev->pc10_counter)
+		return true;
+
+	return false;
+}
+
+static inline bool pmc_core_is_s0ix_failed(struct pmc_dev *pmcdev)
+{
+	u64 s0ix_counter;
+
+	if (pmc_core_dev_state_get(pmcdev, &s0ix_counter))
+		return false;
+
+	if (s0ix_counter == pmcdev->s0ix_counter)
+		return true;
+
+	return false;
+}
+
+static __maybe_unused int pmc_core_resume(struct device *dev)
+{
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+	const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
+	int offset = pmcdev->map->lpm_status_offset;
+
+	if (!pmcdev->check_counters)
+		return 0;
+
+	if (!pmc_core_is_s0ix_failed(pmcdev))
+		return 0;
+
+	if (pmc_core_is_pc10_failed(pmcdev)) {
+		/* S0ix failed because of PC10 entry failure */
+		dev_info(dev, "CPU did not enter PC10!!! (PC10 cnt=0x%llx)\n",
+			 pmcdev->pc10_counter);
+		return 0;
+	}
+
+	/* The real interesting case - S0ix failed - lets ask PMC why. */
+	dev_warn(dev, "CPU did not enter SLP_S0!!! (S0ix cnt=%llu)\n",
+		 pmcdev->s0ix_counter);
+	if (pmcdev->map->slps0_dbg_maps)
+		pmc_core_slps0_display(pmcdev, dev, NULL);
+	if (pmcdev->map->lpm_sts)
+		pmc_core_lpm_display(pmcdev, dev, NULL, offset, "STATUS", maps);
+
+	return 0;
+}
+
+static const struct dev_pm_ops pmc_core_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pmc_core_suspend, pmc_core_resume)
+};
+
+static const struct acpi_device_id pmc_core_acpi_ids[] = {
+	{"INT33A1", 0}, /* _HID for Intel Power Engine, _CID PNP0D80*/
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, pmc_core_acpi_ids);
+
+static struct platform_driver pmc_core_driver = {
+	.driver = {
+		.name = "intel_pmc_core",
+		.acpi_match_table = ACPI_PTR(pmc_core_acpi_ids),
+		.pm = &pmc_core_pm_ops,
+		.dev_groups = pmc_dev_groups,
+	},
+	.probe = pmc_core_probe,
+	.remove = pmc_core_remove,
+};
+
+module_platform_driver(pmc_core_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel PMC Core Driver");
diff --git a/drivers/platform/x86/intel/pmc/core.h b/drivers/platform/x86/intel/pmc/core.h
new file mode 100644
index 000000000..7a059e02c
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/core.h
@@ -0,0 +1,363 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Intel Core SoC Power Management Controller Header File
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Authors: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
+ *          Vishwanath Somayaji <vishwanath.somayaji@intel.com>
+ */
+
+#ifndef PMC_CORE_H
+#define PMC_CORE_H
+
+#include <linux/bits.h>
+
+#define PMC_BASE_ADDR_DEFAULT			0xFE000000
+
+/* Sunrise Point Power Management Controller PCI Device ID */
+#define SPT_PMC_PCI_DEVICE_ID			0x9d21
+#define SPT_PMC_BASE_ADDR_OFFSET		0x48
+#define SPT_PMC_SLP_S0_RES_COUNTER_OFFSET	0x13c
+#define SPT_PMC_PM_CFG_OFFSET			0x18
+#define SPT_PMC_PM_STS_OFFSET			0x1c
+#define SPT_PMC_MTPMC_OFFSET			0x20
+#define SPT_PMC_MFPMC_OFFSET			0x38
+#define SPT_PMC_LTR_IGNORE_OFFSET		0x30C
+#define SPT_PMC_VRIC1_OFFSET			0x31c
+#define SPT_PMC_MPHY_CORE_STS_0			0x1143
+#define SPT_PMC_MPHY_CORE_STS_1			0x1142
+#define SPT_PMC_MPHY_COM_STS_0			0x1155
+#define SPT_PMC_MMIO_REG_LEN			0x1000
+#define SPT_PMC_SLP_S0_RES_COUNTER_STEP		0x68
+#define PMC_BASE_ADDR_MASK			~(SPT_PMC_MMIO_REG_LEN - 1)
+#define MTPMC_MASK				0xffff0000
+#define PPFEAR_MAX_NUM_ENTRIES			12
+#define SPT_PPFEAR_NUM_ENTRIES			5
+#define SPT_PMC_READ_DISABLE_BIT		0x16
+#define SPT_PMC_MSG_FULL_STS_BIT		0x18
+#define NUM_RETRIES				100
+#define SPT_NUM_IP_IGN_ALLOWED			17
+
+#define SPT_PMC_LTR_CUR_PLT			0x350
+#define SPT_PMC_LTR_CUR_ASLT			0x354
+#define SPT_PMC_LTR_SPA				0x360
+#define SPT_PMC_LTR_SPB				0x364
+#define SPT_PMC_LTR_SATA			0x368
+#define SPT_PMC_LTR_GBE				0x36C
+#define SPT_PMC_LTR_XHCI			0x370
+#define SPT_PMC_LTR_RESERVED			0x374
+#define SPT_PMC_LTR_ME				0x378
+#define SPT_PMC_LTR_EVA				0x37C
+#define SPT_PMC_LTR_SPC				0x380
+#define SPT_PMC_LTR_AZ				0x384
+#define SPT_PMC_LTR_LPSS			0x38C
+#define SPT_PMC_LTR_CAM				0x390
+#define SPT_PMC_LTR_SPD				0x394
+#define SPT_PMC_LTR_SPE				0x398
+#define SPT_PMC_LTR_ESPI			0x39C
+#define SPT_PMC_LTR_SCC				0x3A0
+#define SPT_PMC_LTR_ISH				0x3A4
+
+/* Sunrise Point: PGD PFET Enable Ack Status Registers */
+enum ppfear_regs {
+	SPT_PMC_XRAM_PPFEAR0A = 0x590,
+	SPT_PMC_XRAM_PPFEAR0B,
+	SPT_PMC_XRAM_PPFEAR0C,
+	SPT_PMC_XRAM_PPFEAR0D,
+	SPT_PMC_XRAM_PPFEAR1A,
+};
+
+#define SPT_PMC_BIT_PMC				BIT(0)
+#define SPT_PMC_BIT_OPI				BIT(1)
+#define SPT_PMC_BIT_SPI				BIT(2)
+#define SPT_PMC_BIT_XHCI			BIT(3)
+#define SPT_PMC_BIT_SPA				BIT(4)
+#define SPT_PMC_BIT_SPB				BIT(5)
+#define SPT_PMC_BIT_SPC				BIT(6)
+#define SPT_PMC_BIT_GBE				BIT(7)
+
+#define SPT_PMC_BIT_SATA			BIT(0)
+#define SPT_PMC_BIT_HDA_PGD0			BIT(1)
+#define SPT_PMC_BIT_HDA_PGD1			BIT(2)
+#define SPT_PMC_BIT_HDA_PGD2			BIT(3)
+#define SPT_PMC_BIT_HDA_PGD3			BIT(4)
+#define SPT_PMC_BIT_RSVD_0B			BIT(5)
+#define SPT_PMC_BIT_LPSS			BIT(6)
+#define SPT_PMC_BIT_LPC				BIT(7)
+
+#define SPT_PMC_BIT_SMB				BIT(0)
+#define SPT_PMC_BIT_ISH				BIT(1)
+#define SPT_PMC_BIT_P2SB			BIT(2)
+#define SPT_PMC_BIT_DFX				BIT(3)
+#define SPT_PMC_BIT_SCC				BIT(4)
+#define SPT_PMC_BIT_RSVD_0C			BIT(5)
+#define SPT_PMC_BIT_FUSE			BIT(6)
+#define SPT_PMC_BIT_CAMREA			BIT(7)
+
+#define SPT_PMC_BIT_RSVD_0D			BIT(0)
+#define SPT_PMC_BIT_USB3_OTG			BIT(1)
+#define SPT_PMC_BIT_EXI				BIT(2)
+#define SPT_PMC_BIT_CSE				BIT(3)
+#define SPT_PMC_BIT_CSME_KVM			BIT(4)
+#define SPT_PMC_BIT_CSME_PMT			BIT(5)
+#define SPT_PMC_BIT_CSME_CLINK			BIT(6)
+#define SPT_PMC_BIT_CSME_PTIO			BIT(7)
+
+#define SPT_PMC_BIT_CSME_USBR			BIT(0)
+#define SPT_PMC_BIT_CSME_SUSRAM			BIT(1)
+#define SPT_PMC_BIT_CSME_SMT			BIT(2)
+#define SPT_PMC_BIT_RSVD_1A			BIT(3)
+#define SPT_PMC_BIT_CSME_SMS2			BIT(4)
+#define SPT_PMC_BIT_CSME_SMS1			BIT(5)
+#define SPT_PMC_BIT_CSME_RTC			BIT(6)
+#define SPT_PMC_BIT_CSME_PSF			BIT(7)
+
+#define SPT_PMC_BIT_MPHY_LANE0			BIT(0)
+#define SPT_PMC_BIT_MPHY_LANE1			BIT(1)
+#define SPT_PMC_BIT_MPHY_LANE2			BIT(2)
+#define SPT_PMC_BIT_MPHY_LANE3			BIT(3)
+#define SPT_PMC_BIT_MPHY_LANE4			BIT(4)
+#define SPT_PMC_BIT_MPHY_LANE5			BIT(5)
+#define SPT_PMC_BIT_MPHY_LANE6			BIT(6)
+#define SPT_PMC_BIT_MPHY_LANE7			BIT(7)
+
+#define SPT_PMC_BIT_MPHY_LANE8			BIT(0)
+#define SPT_PMC_BIT_MPHY_LANE9			BIT(1)
+#define SPT_PMC_BIT_MPHY_LANE10			BIT(2)
+#define SPT_PMC_BIT_MPHY_LANE11			BIT(3)
+#define SPT_PMC_BIT_MPHY_LANE12			BIT(4)
+#define SPT_PMC_BIT_MPHY_LANE13			BIT(5)
+#define SPT_PMC_BIT_MPHY_LANE14			BIT(6)
+#define SPT_PMC_BIT_MPHY_LANE15			BIT(7)
+
+#define SPT_PMC_BIT_MPHY_CMN_LANE0		BIT(0)
+#define SPT_PMC_BIT_MPHY_CMN_LANE1		BIT(1)
+#define SPT_PMC_BIT_MPHY_CMN_LANE2		BIT(2)
+#define SPT_PMC_BIT_MPHY_CMN_LANE3		BIT(3)
+
+#define SPT_PMC_VRIC1_SLPS0LVEN			BIT(13)
+#define SPT_PMC_VRIC1_XTALSDQDIS		BIT(22)
+
+/* Cannonlake Power Management Controller register offsets */
+#define CNP_PMC_SLPS0_DBG_OFFSET		0x10B4
+#define CNP_PMC_PM_CFG_OFFSET			0x1818
+#define CNP_PMC_SLP_S0_RES_COUNTER_OFFSET	0x193C
+#define CNP_PMC_LTR_IGNORE_OFFSET		0x1B0C
+/* Cannonlake: PGD PFET Enable Ack Status Register(s) start */
+#define CNP_PMC_HOST_PPFEAR0A			0x1D90
+
+#define CNP_PMC_LATCH_SLPS0_EVENTS		BIT(31)
+
+#define CNP_PMC_MMIO_REG_LEN			0x2000
+#define CNP_PPFEAR_NUM_ENTRIES			8
+#define CNP_PMC_READ_DISABLE_BIT		22
+#define CNP_NUM_IP_IGN_ALLOWED			19
+#define CNP_PMC_LTR_CUR_PLT			0x1B50
+#define CNP_PMC_LTR_CUR_ASLT			0x1B54
+#define CNP_PMC_LTR_SPA				0x1B60
+#define CNP_PMC_LTR_SPB				0x1B64
+#define CNP_PMC_LTR_SATA			0x1B68
+#define CNP_PMC_LTR_GBE				0x1B6C
+#define CNP_PMC_LTR_XHCI			0x1B70
+#define CNP_PMC_LTR_RESERVED			0x1B74
+#define CNP_PMC_LTR_ME				0x1B78
+#define CNP_PMC_LTR_EVA				0x1B7C
+#define CNP_PMC_LTR_SPC				0x1B80
+#define CNP_PMC_LTR_AZ				0x1B84
+#define CNP_PMC_LTR_LPSS			0x1B8C
+#define CNP_PMC_LTR_CAM				0x1B90
+#define CNP_PMC_LTR_SPD				0x1B94
+#define CNP_PMC_LTR_SPE				0x1B98
+#define CNP_PMC_LTR_ESPI			0x1B9C
+#define CNP_PMC_LTR_SCC				0x1BA0
+#define CNP_PMC_LTR_ISH				0x1BA4
+#define CNP_PMC_LTR_CNV				0x1BF0
+#define CNP_PMC_LTR_EMMC			0x1BF4
+#define CNP_PMC_LTR_UFSX2			0x1BF8
+
+#define LTR_DECODED_VAL				GENMASK(9, 0)
+#define LTR_DECODED_SCALE			GENMASK(12, 10)
+#define LTR_REQ_SNOOP				BIT(15)
+#define LTR_REQ_NONSNOOP			BIT(31)
+
+#define ICL_PPFEAR_NUM_ENTRIES			9
+#define ICL_NUM_IP_IGN_ALLOWED			20
+#define ICL_PMC_LTR_WIGIG			0x1BFC
+#define ICL_PMC_SLP_S0_RES_COUNTER_STEP		0x64
+
+#define LPM_MAX_NUM_MODES			8
+#define LPM_DEFAULT_PRI				{ 7, 6, 2, 5, 4, 1, 3, 0 }
+
+#define GET_X2_COUNTER(v)			((v) >> 1)
+#define LPM_STS_LATCH_MODE			BIT(31)
+
+#define TGL_PMC_SLP_S0_RES_COUNTER_STEP		0x7A
+#define TGL_PMC_LTR_THC0			0x1C04
+#define TGL_PMC_LTR_THC1			0x1C08
+#define TGL_NUM_IP_IGN_ALLOWED			23
+#define TGL_PMC_LPM_RES_COUNTER_STEP_X2		61	/* 30.5us * 2 */
+
+#define ADL_PMC_LTR_SPF				0x1C00
+#define ADL_NUM_IP_IGN_ALLOWED			23
+#define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET	0x1098
+
+/*
+ * Tigerlake Power Management Controller register offsets
+ */
+#define TGL_LPM_STS_LATCH_EN_OFFSET		0x1C34
+#define TGL_LPM_EN_OFFSET			0x1C78
+#define TGL_LPM_RESIDENCY_OFFSET		0x1C80
+
+/* Tigerlake Low Power Mode debug registers */
+#define TGL_LPM_STATUS_OFFSET			0x1C3C
+#define TGL_LPM_LIVE_STATUS_OFFSET		0x1C5C
+#define TGL_LPM_PRI_OFFSET			0x1C7C
+#define TGL_LPM_NUM_MAPS			6
+
+/* Extended Test Mode Register 3 (CNL and later) */
+#define ETR3_OFFSET				0x1048
+#define ETR3_CF9GR				BIT(20)
+#define ETR3_CF9LOCK				BIT(31)
+
+/* Extended Test Mode Register LPM bits (TGL and later */
+#define ETR3_CLEAR_LPM_EVENTS			BIT(28)
+
+/* Alder Lake Power Management Controller register offsets */
+#define ADL_LPM_EN_OFFSET			0x179C
+#define ADL_LPM_RESIDENCY_OFFSET		0x17A4
+#define ADL_LPM_NUM_MODES			2
+#define ADL_LPM_NUM_MAPS			14
+
+/* Alder Lake Low Power Mode debug registers */
+#define ADL_LPM_STATUS_OFFSET			0x170C
+#define ADL_LPM_PRI_OFFSET			0x17A0
+#define ADL_LPM_STATUS_LATCH_EN_OFFSET		0x1704
+#define ADL_LPM_LIVE_STATUS_OFFSET		0x1764
+
+static const char *pmc_lpm_modes[] = {
+	"S0i2.0",
+	"S0i2.1",
+	"S0i2.2",
+	"S0i3.0",
+	"S0i3.1",
+	"S0i3.2",
+	"S0i3.3",
+	"S0i3.4",
+	NULL
+};
+
+struct pmc_bit_map {
+	const char *name;
+	u32 bit_mask;
+};
+
+/**
+ * struct pmc_reg_map - Structure used to define parameter unique to a
+			PCH family
+ * @pfear_sts:		Maps name of IP block to PPFEAR* bit
+ * @mphy_sts:		Maps name of MPHY lane to MPHY status lane status bit
+ * @pll_sts:		Maps name of PLL to corresponding bit status
+ * @slps0_dbg_maps:	Array of SLP_S0_DBG* registers containing debug info
+ * @ltr_show_sts:	Maps PCH IP Names to their MMIO register offsets
+ * @slp_s0_offset:	PWRMBASE offset to read SLP_S0 residency
+ * @ltr_ignore_offset:	PWRMBASE offset to read/write LTR ignore bit
+ * @regmap_length:	Length of memory to map from PWRMBASE address to access
+ * @ppfear0_offset:	PWRMBASE offset to to read PPFEAR*
+ * @ppfear_buckets:	Number of 8 bits blocks to read all IP blocks from
+ *			PPFEAR
+ * @pm_cfg_offset:	PWRMBASE offset to PM_CFG register
+ * @pm_read_disable_bit: Bit index to read PMC_READ_DISABLE
+ * @slps0_dbg_offset:	PWRMBASE offset to SLP_S0_DEBUG_REG*
+ *
+ * Each PCH has unique set of register offsets and bit indexes. This structure
+ * captures them to have a common implementation.
+ */
+struct pmc_reg_map {
+	const struct pmc_bit_map **pfear_sts;
+	const struct pmc_bit_map *mphy_sts;
+	const struct pmc_bit_map *pll_sts;
+	const struct pmc_bit_map **slps0_dbg_maps;
+	const struct pmc_bit_map *ltr_show_sts;
+	const struct pmc_bit_map *msr_sts;
+	const struct pmc_bit_map **lpm_sts;
+	const u32 slp_s0_offset;
+	const int slp_s0_res_counter_step;
+	const u32 ltr_ignore_offset;
+	const int regmap_length;
+	const u32 ppfear0_offset;
+	const int ppfear_buckets;
+	const u32 pm_cfg_offset;
+	const int pm_read_disable_bit;
+	const u32 slps0_dbg_offset;
+	const u32 ltr_ignore_max;
+	const u32 pm_vric1_offset;
+	/* Low Power Mode registers */
+	const int lpm_num_maps;
+	const int lpm_num_modes;
+	const int lpm_res_counter_step_x2;
+	const u32 lpm_sts_latch_en_offset;
+	const u32 lpm_en_offset;
+	const u32 lpm_priority_offset;
+	const u32 lpm_residency_offset;
+	const u32 lpm_status_offset;
+	const u32 lpm_live_status_offset;
+	const u32 etr3_offset;
+};
+
+/**
+ * struct pmc_dev - pmc device structure
+ * @base_addr:		contains pmc base address
+ * @regbase:		pointer to io-remapped memory location
+ * @map:		pointer to pmc_reg_map struct that contains platform
+ *			specific attributes
+ * @dbgfs_dir:		path to debugfs interface
+ * @pmc_xram_read_bit:	flag to indicate whether PMC XRAM shadow registers
+ *			used to read MPHY PG and PLL status are available
+ * @mutex_lock:		mutex to complete one transcation
+ * @check_counters:	On resume, check if counters are getting incremented
+ * @pc10_counter:	PC10 residency counter
+ * @s0ix_counter:	S0ix residency (step adjusted)
+ * @num_lpm_modes:	Count of enabled modes
+ * @lpm_en_modes:	Array of enabled modes from lowest to highest priority
+ * @lpm_req_regs:	List of substate requirements
+ *
+ * pmc_dev contains info about power management controller device.
+ */
+struct pmc_dev {
+	u32 base_addr;
+	void __iomem *regbase;
+	const struct pmc_reg_map *map;
+	struct dentry *dbgfs_dir;
+	int pmc_xram_read_bit;
+	struct mutex lock; /* generic mutex lock for PMC Core */
+
+	bool check_counters; /* Check for counter increments on resume */
+	u64 pc10_counter;
+	u64 s0ix_counter;
+	int num_lpm_modes;
+	int lpm_en_modes[LPM_MAX_NUM_MODES];
+	u32 *lpm_req_regs;
+};
+
+#define pmc_for_each_mode(i, mode, pmcdev)		\
+	for (i = 0, mode = pmcdev->lpm_en_modes[i];	\
+	     i < pmcdev->num_lpm_modes;			\
+	     i++, mode = pmcdev->lpm_en_modes[i])
+
+#define DEFINE_PMC_CORE_ATTR_WRITE(__name)				\
+static int __name ## _open(struct inode *inode, struct file *file)	\
+{									\
+	return single_open(file, __name ## _show, inode->i_private);	\
+}									\
+									\
+static const struct file_operations __name ## _fops = {			\
+	.owner		= THIS_MODULE,					\
+	.open		= __name ## _open,				\
+	.read		= seq_read,					\
+	.write		= __name ## _write,				\
+	.release	= single_release,				\
+}
+
+#endif /* PMC_CORE_H */
diff --git a/drivers/platform/x86/intel/pmc/pltdrv.c b/drivers/platform/x86/intel/pmc/pltdrv.c
new file mode 100644
index 000000000..ddfba38c2
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/pltdrv.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Intel PMC Core platform init
+ * Copyright (c) 2019, Google Inc.
+ * Author - Rajat Jain
+ *
+ * This code instantiates platform devices for intel_pmc_core driver, only
+ * on supported platforms that may not have the ACPI devices in the ACPI tables.
+ * No new platforms should be added here, because we expect that new platforms
+ * should all have the ACPI device, which is the preferred way of enumeration.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+#include <xen/xen.h>
+
+static void intel_pmc_core_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+static struct platform_device *pmc_core_device;
+
+/*
+ * intel_pmc_core_platform_ids is the list of platforms where we want to
+ * instantiate the platform_device if not already instantiated. This is
+ * different than intel_pmc_core_ids in intel_pmc_core.c which is the
+ * list of platforms that the driver supports for pmc_core device. The
+ * other list may grow, but this list should not.
+ */
+static const struct x86_cpu_id intel_pmc_core_platform_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L,		&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE,		&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L,	&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE,		&pmc_core_device),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L,		&pmc_core_device),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_pmc_core_platform_ids);
+
+static int __init pmc_core_platform_init(void)
+{
+	int retval;
+
+	/* Skip creating the platform device if ACPI already has a device */
+	if (acpi_dev_present("INT33A1", NULL, -1))
+		return -ENODEV;
+
+	/*
+	 * Skip forcefully attaching the device for VMs. Make an exception for
+	 * Xen dom0, which does have full hardware access.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR) && !xen_initial_domain())
+		return -ENODEV;
+
+	if (!x86_match_cpu(intel_pmc_core_platform_ids))
+		return -ENODEV;
+
+	pmc_core_device = kzalloc(sizeof(*pmc_core_device), GFP_KERNEL);
+	if (!pmc_core_device)
+		return -ENOMEM;
+
+	pmc_core_device->name = "intel_pmc_core";
+	pmc_core_device->dev.release = intel_pmc_core_release;
+
+	retval = platform_device_register(pmc_core_device);
+	if (retval)
+		platform_device_put(pmc_core_device);
+
+	return retval;
+}
+
+static void __exit pmc_core_platform_exit(void)
+{
+	platform_device_unregister(pmc_core_device);
+}
+
+module_init(pmc_core_platform_init);
+module_exit(pmc_core_platform_exit);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/pmt/Kconfig b/drivers/platform/x86/intel/pmt/Kconfig
new file mode 100644
index 000000000..e916fc966
--- /dev/null
+++ b/drivers/platform/x86/intel/pmt/Kconfig
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel Platform Monitoring Technology drivers
+#
+
+config INTEL_PMT_CLASS
+	tristate
+	help
+	  The Intel Platform Monitoring Technology (PMT) class driver provides
+	  the basic sysfs interface and file hierarchy used by PMT devices.
+
+	  For more information, see:
+	  <file:Documentation/ABI/testing/sysfs-class-intel_pmt>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_pmt_class.
+
+config INTEL_PMT_TELEMETRY
+	tristate "Intel Platform Monitoring Technology (PMT) Telemetry driver"
+	depends on INTEL_VSEC
+	select INTEL_PMT_CLASS
+	help
+	  The Intel Platform Monitory Technology (PMT) Telemetry driver provides
+	  access to hardware telemetry metrics on devices that support the
+	  feature.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_pmt_telemetry.
+
+config INTEL_PMT_CRASHLOG
+	tristate "Intel Platform Monitoring Technology (PMT) Crashlog driver"
+	depends on INTEL_VSEC
+	select INTEL_PMT_CLASS
+	help
+	  The Intel Platform Monitoring Technology (PMT) crashlog driver provides
+	  access to hardware crashlog capabilities on devices that support the
+	  feature.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_pmt_crashlog.
diff --git a/drivers/platform/x86/intel/pmt/Makefile b/drivers/platform/x86/intel/pmt/Makefile
new file mode 100644
index 000000000..279e158c7
--- /dev/null
+++ b/drivers/platform/x86/intel/pmt/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for linux/drivers/platform/x86/intel/pmt
+# Intel Platform Monitoring Technology Drivers
+#
+
+obj-$(CONFIG_INTEL_PMT_CLASS)		+= pmt_class.o
+pmt_class-y				:= class.o
+obj-$(CONFIG_INTEL_PMT_TELEMETRY)	+= pmt_telemetry.o
+pmt_telemetry-y				:= telemetry.o
+obj-$(CONFIG_INTEL_PMT_CRASHLOG)	+= pmt_crashlog.o
+pmt_crashlog-y				:= crashlog.o
diff --git a/drivers/platform/x86/intel/pmt/class.c b/drivers/platform/x86/intel/pmt/class.c
new file mode 100644
index 000000000..46598dcb6
--- /dev/null
+++ b/drivers/platform/x86/intel/pmt/class.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Platform Monitory Technology Telemetry driver
+ *
+ * Copyright (c) 2020, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Author: "Alexander Duyck" <alexander.h.duyck@linux.intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+
+#include "../vsec.h"
+#include "class.h"
+
+#define PMT_XA_START		0
+#define PMT_XA_MAX		INT_MAX
+#define PMT_XA_LIMIT		XA_LIMIT(PMT_XA_START, PMT_XA_MAX)
+#define GUID_SPR_PUNIT		0x9956f43f
+
+bool intel_pmt_is_early_client_hw(struct device *dev)
+{
+	struct intel_vsec_device *ivdev = dev_to_ivdev(dev);
+
+	/*
+	 * Early implementations of PMT on client platforms have some
+	 * differences from the server platforms (which use the Out Of Band
+	 * Management Services Module OOBMSM).
+	 */
+	return !!(ivdev->info->quirks & VSEC_QUIRK_EARLY_HW);
+}
+EXPORT_SYMBOL_GPL(intel_pmt_is_early_client_hw);
+
+static inline int
+pmt_memcpy64_fromio(void *to, const u64 __iomem *from, size_t count)
+{
+	int i, remain;
+	u64 *buf = to;
+
+	if (!IS_ALIGNED((unsigned long)from, 8))
+		return -EFAULT;
+
+	for (i = 0; i < count/8; i++)
+		buf[i] = readq(&from[i]);
+
+	/* Copy any remaining bytes */
+	remain = count % 8;
+	if (remain) {
+		u64 tmp = readq(&from[i]);
+
+		memcpy(&buf[i], &tmp, remain);
+	}
+
+	return count;
+}
+
+/*
+ * sysfs
+ */
+static ssize_t
+intel_pmt_read(struct file *filp, struct kobject *kobj,
+	       struct bin_attribute *attr, char *buf, loff_t off,
+	       size_t count)
+{
+	struct intel_pmt_entry *entry = container_of(attr,
+						     struct intel_pmt_entry,
+						     pmt_bin_attr);
+
+	if (off < 0)
+		return -EINVAL;
+
+	if (off >= entry->size)
+		return 0;
+
+	if (count > entry->size - off)
+		count = entry->size - off;
+
+	if (entry->guid == GUID_SPR_PUNIT)
+		/* PUNIT on SPR only supports aligned 64-bit read */
+		count = pmt_memcpy64_fromio(buf, entry->base + off, count);
+	else
+		memcpy_fromio(buf, entry->base + off, count);
+
+	return count;
+}
+
+static int
+intel_pmt_mmap(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr, struct vm_area_struct *vma)
+{
+	struct intel_pmt_entry *entry = container_of(attr,
+						     struct intel_pmt_entry,
+						     pmt_bin_attr);
+	unsigned long vsize = vma->vm_end - vma->vm_start;
+	struct device *dev = kobj_to_dev(kobj);
+	unsigned long phys = entry->base_addr;
+	unsigned long pfn = PFN_DOWN(phys);
+	unsigned long psize;
+
+	if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
+		return -EROFS;
+
+	psize = (PFN_UP(entry->base_addr + entry->size) - pfn) * PAGE_SIZE;
+	if (vsize > psize) {
+		dev_err(dev, "Requested mmap size is too large\n");
+		return -EINVAL;
+	}
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	if (io_remap_pfn_range(vma, vma->vm_start, pfn,
+		vsize, vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static ssize_t
+guid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct intel_pmt_entry *entry = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%x\n", entry->guid);
+}
+static DEVICE_ATTR_RO(guid);
+
+static ssize_t size_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct intel_pmt_entry *entry = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%zu\n", entry->size);
+}
+static DEVICE_ATTR_RO(size);
+
+static ssize_t
+offset_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct intel_pmt_entry *entry = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%lu\n", offset_in_page(entry->base_addr));
+}
+static DEVICE_ATTR_RO(offset);
+
+static struct attribute *intel_pmt_attrs[] = {
+	&dev_attr_guid.attr,
+	&dev_attr_size.attr,
+	&dev_attr_offset.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(intel_pmt);
+
+static struct class intel_pmt_class = {
+	.name = "intel_pmt",
+	.owner = THIS_MODULE,
+	.dev_groups = intel_pmt_groups,
+};
+
+static int intel_pmt_populate_entry(struct intel_pmt_entry *entry,
+				    struct intel_pmt_header *header,
+				    struct device *dev,
+				    struct resource *disc_res)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev->parent);
+	u8 bir;
+
+	/*
+	 * The base offset should always be 8 byte aligned.
+	 *
+	 * For non-local access types the lower 3 bits of base offset
+	 * contains the index of the base address register where the
+	 * telemetry can be found.
+	 */
+	bir = GET_BIR(header->base_offset);
+
+	/* Local access and BARID only for now */
+	switch (header->access_type) {
+	case ACCESS_LOCAL:
+		if (bir) {
+			dev_err(dev,
+				"Unsupported BAR index %d for access type %d\n",
+				bir, header->access_type);
+			return -EINVAL;
+		}
+		/*
+		 * For access_type LOCAL, the base address is as follows:
+		 * base address = end of discovery region + base offset
+		 */
+		entry->base_addr = disc_res->end + 1 + header->base_offset;
+
+		/*
+		 * Some hardware use a different calculation for the base address
+		 * when access_type == ACCESS_LOCAL. On the these systems
+		 * ACCCESS_LOCAL refers to an address in the same BAR as the
+		 * header but at a fixed offset. But as the header address was
+		 * supplied to the driver, we don't know which BAR it was in.
+		 * So search for the bar whose range includes the header address.
+		 */
+		if (intel_pmt_is_early_client_hw(dev)) {
+			int i;
+
+			entry->base_addr = 0;
+			for (i = 0; i < 6; i++)
+				if (disc_res->start >= pci_resource_start(pci_dev, i) &&
+				   (disc_res->start <= pci_resource_end(pci_dev, i))) {
+					entry->base_addr = pci_resource_start(pci_dev, i) +
+							   header->base_offset;
+					break;
+				}
+			if (!entry->base_addr)
+				return -EINVAL;
+		}
+
+		break;
+	case ACCESS_BARID:
+		/*
+		 * If another BAR was specified then the base offset
+		 * represents the offset within that BAR. SO retrieve the
+		 * address from the parent PCI device and add offset.
+		 */
+		entry->base_addr = pci_resource_start(pci_dev, bir) +
+				   GET_ADDRESS(header->base_offset);
+		break;
+	default:
+		dev_err(dev, "Unsupported access type %d\n",
+			header->access_type);
+		return -EINVAL;
+	}
+
+	entry->guid = header->guid;
+	entry->size = header->size;
+
+	return 0;
+}
+
+static int intel_pmt_dev_register(struct intel_pmt_entry *entry,
+				  struct intel_pmt_namespace *ns,
+				  struct device *parent)
+{
+	struct resource res = {0};
+	struct device *dev;
+	int ret;
+
+	ret = xa_alloc(ns->xa, &entry->devid, entry, PMT_XA_LIMIT, GFP_KERNEL);
+	if (ret)
+		return ret;
+
+	dev = device_create(&intel_pmt_class, parent, MKDEV(0, 0), entry,
+			    "%s%d", ns->name, entry->devid);
+
+	if (IS_ERR(dev)) {
+		dev_err(parent, "Could not create %s%d device node\n",
+			ns->name, entry->devid);
+		ret = PTR_ERR(dev);
+		goto fail_dev_create;
+	}
+
+	entry->kobj = &dev->kobj;
+
+	if (ns->attr_grp) {
+		ret = sysfs_create_group(entry->kobj, ns->attr_grp);
+		if (ret)
+			goto fail_sysfs;
+	}
+
+	/* if size is 0 assume no data buffer, so no file needed */
+	if (!entry->size)
+		return 0;
+
+	res.start = entry->base_addr;
+	res.end = res.start + entry->size - 1;
+	res.flags = IORESOURCE_MEM;
+
+	entry->base = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(entry->base)) {
+		ret = PTR_ERR(entry->base);
+		goto fail_ioremap;
+	}
+
+	sysfs_bin_attr_init(&entry->pmt_bin_attr);
+	entry->pmt_bin_attr.attr.name = ns->name;
+	entry->pmt_bin_attr.attr.mode = 0440;
+	entry->pmt_bin_attr.mmap = intel_pmt_mmap;
+	entry->pmt_bin_attr.read = intel_pmt_read;
+	entry->pmt_bin_attr.size = entry->size;
+
+	ret = sysfs_create_bin_file(&dev->kobj, &entry->pmt_bin_attr);
+	if (!ret)
+		return 0;
+
+fail_ioremap:
+	if (ns->attr_grp)
+		sysfs_remove_group(entry->kobj, ns->attr_grp);
+fail_sysfs:
+	device_unregister(dev);
+fail_dev_create:
+	xa_erase(ns->xa, entry->devid);
+
+	return ret;
+}
+
+int intel_pmt_dev_create(struct intel_pmt_entry *entry, struct intel_pmt_namespace *ns,
+			 struct intel_vsec_device *intel_vsec_dev, int idx)
+{
+	struct device *dev = &intel_vsec_dev->auxdev.dev;
+	struct intel_pmt_header header;
+	struct resource	*disc_res;
+	int ret;
+
+	disc_res = &intel_vsec_dev->resource[idx];
+
+	entry->disc_table = devm_ioremap_resource(dev, disc_res);
+	if (IS_ERR(entry->disc_table))
+		return PTR_ERR(entry->disc_table);
+
+	ret = ns->pmt_header_decode(entry, &header, dev);
+	if (ret)
+		return ret;
+
+	ret = intel_pmt_populate_entry(entry, &header, dev, disc_res);
+	if (ret)
+		return ret;
+
+	return intel_pmt_dev_register(entry, ns, dev);
+
+}
+EXPORT_SYMBOL_GPL(intel_pmt_dev_create);
+
+void intel_pmt_dev_destroy(struct intel_pmt_entry *entry,
+			   struct intel_pmt_namespace *ns)
+{
+	struct device *dev = kobj_to_dev(entry->kobj);
+
+	if (entry->size)
+		sysfs_remove_bin_file(entry->kobj, &entry->pmt_bin_attr);
+
+	if (ns->attr_grp)
+		sysfs_remove_group(entry->kobj, ns->attr_grp);
+
+	device_unregister(dev);
+	xa_erase(ns->xa, entry->devid);
+}
+EXPORT_SYMBOL_GPL(intel_pmt_dev_destroy);
+
+static int __init pmt_class_init(void)
+{
+	return class_register(&intel_pmt_class);
+}
+
+static void __exit pmt_class_exit(void)
+{
+	class_unregister(&intel_pmt_class);
+}
+
+module_init(pmt_class_init);
+module_exit(pmt_class_exit);
+
+MODULE_AUTHOR("Alexander Duyck <alexander.h.duyck@linux.intel.com>");
+MODULE_DESCRIPTION("Intel PMT Class driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/pmt/class.h b/drivers/platform/x86/intel/pmt/class.h
new file mode 100644
index 000000000..db11d5886
--- /dev/null
+++ b/drivers/platform/x86/intel/pmt/class.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _INTEL_PMT_CLASS_H
+#define _INTEL_PMT_CLASS_H
+
+#include <linux/xarray.h>
+#include <linux/types.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "../vsec.h"
+
+/* PMT access types */
+#define ACCESS_BARID		2
+#define ACCESS_LOCAL		3
+
+/* PMT discovery base address/offset register layout */
+#define GET_BIR(v)		((v) & GENMASK(2, 0))
+#define GET_ADDRESS(v)		((v) & GENMASK(31, 3))
+
+struct intel_pmt_entry {
+	struct bin_attribute	pmt_bin_attr;
+	struct kobject		*kobj;
+	void __iomem		*disc_table;
+	void __iomem		*base;
+	unsigned long		base_addr;
+	size_t			size;
+	u32			guid;
+	int			devid;
+};
+
+struct intel_pmt_header {
+	u32	base_offset;
+	u32	size;
+	u32	guid;
+	u8	access_type;
+};
+
+struct intel_pmt_namespace {
+	const char *name;
+	struct xarray *xa;
+	const struct attribute_group *attr_grp;
+	int (*pmt_header_decode)(struct intel_pmt_entry *entry,
+				 struct intel_pmt_header *header,
+				 struct device *dev);
+};
+
+bool intel_pmt_is_early_client_hw(struct device *dev);
+int intel_pmt_dev_create(struct intel_pmt_entry *entry,
+			 struct intel_pmt_namespace *ns,
+			 struct intel_vsec_device *dev, int idx);
+void intel_pmt_dev_destroy(struct intel_pmt_entry *entry,
+			   struct intel_pmt_namespace *ns);
+#endif
diff --git a/drivers/platform/x86/intel/pmt/crashlog.c b/drivers/platform/x86/intel/pmt/crashlog.c
new file mode 100644
index 000000000..ace1239bc
--- /dev/null
+++ b/drivers/platform/x86/intel/pmt/crashlog.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Platform Monitoring Technology Crashlog driver
+ *
+ * Copyright (c) 2020, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Author: "Alexander Duyck" <alexander.h.duyck@linux.intel.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/overflow.h>
+
+#include "../vsec.h"
+#include "class.h"
+
+/* Crashlog discovery header types */
+#define CRASH_TYPE_OOBMSM	1
+
+/* Control Flags */
+#define CRASHLOG_FLAG_DISABLE		BIT(28)
+
+/*
+ * Bits 29 and 30 control the state of bit 31.
+ *
+ * Bit 29 will clear bit 31, if set, allowing a new crashlog to be captured.
+ * Bit 30 will immediately trigger a crashlog to be generated, setting bit 31.
+ * Bit 31 is the read-only status with a 1 indicating log is complete.
+ */
+#define CRASHLOG_FLAG_TRIGGER_CLEAR	BIT(29)
+#define CRASHLOG_FLAG_TRIGGER_EXECUTE	BIT(30)
+#define CRASHLOG_FLAG_TRIGGER_COMPLETE	BIT(31)
+#define CRASHLOG_FLAG_TRIGGER_MASK	GENMASK(31, 28)
+
+/* Crashlog Discovery Header */
+#define CONTROL_OFFSET		0x0
+#define GUID_OFFSET		0x4
+#define BASE_OFFSET		0x8
+#define SIZE_OFFSET		0xC
+#define GET_ACCESS(v)		((v) & GENMASK(3, 0))
+#define GET_TYPE(v)		(((v) & GENMASK(7, 4)) >> 4)
+#define GET_VERSION(v)		(((v) & GENMASK(19, 16)) >> 16)
+/* size is in bytes */
+#define GET_SIZE(v)		((v) * sizeof(u32))
+
+struct crashlog_entry {
+	/* entry must be first member of struct */
+	struct intel_pmt_entry		entry;
+	struct mutex			control_mutex;
+};
+
+struct pmt_crashlog_priv {
+	int			num_entries;
+	struct crashlog_entry	entry[];
+};
+
+/*
+ * I/O
+ */
+static bool pmt_crashlog_complete(struct intel_pmt_entry *entry)
+{
+	u32 control = readl(entry->disc_table + CONTROL_OFFSET);
+
+	/* return current value of the crashlog complete flag */
+	return !!(control & CRASHLOG_FLAG_TRIGGER_COMPLETE);
+}
+
+static bool pmt_crashlog_disabled(struct intel_pmt_entry *entry)
+{
+	u32 control = readl(entry->disc_table + CONTROL_OFFSET);
+
+	/* return current value of the crashlog disabled flag */
+	return !!(control & CRASHLOG_FLAG_DISABLE);
+}
+
+static bool pmt_crashlog_supported(struct intel_pmt_entry *entry)
+{
+	u32 discovery_header = readl(entry->disc_table + CONTROL_OFFSET);
+	u32 crash_type, version;
+
+	crash_type = GET_TYPE(discovery_header);
+	version = GET_VERSION(discovery_header);
+
+	/*
+	 * Currently we only recognize OOBMSM version 0 devices.
+	 * We can ignore all other crashlog devices in the system.
+	 */
+	return crash_type == CRASH_TYPE_OOBMSM && version == 0;
+}
+
+static void pmt_crashlog_set_disable(struct intel_pmt_entry *entry,
+				     bool disable)
+{
+	u32 control = readl(entry->disc_table + CONTROL_OFFSET);
+
+	/* clear trigger bits so we are only modifying disable flag */
+	control &= ~CRASHLOG_FLAG_TRIGGER_MASK;
+
+	if (disable)
+		control |= CRASHLOG_FLAG_DISABLE;
+	else
+		control &= ~CRASHLOG_FLAG_DISABLE;
+
+	writel(control, entry->disc_table + CONTROL_OFFSET);
+}
+
+static void pmt_crashlog_set_clear(struct intel_pmt_entry *entry)
+{
+	u32 control = readl(entry->disc_table + CONTROL_OFFSET);
+
+	control &= ~CRASHLOG_FLAG_TRIGGER_MASK;
+	control |= CRASHLOG_FLAG_TRIGGER_CLEAR;
+
+	writel(control, entry->disc_table + CONTROL_OFFSET);
+}
+
+static void pmt_crashlog_set_execute(struct intel_pmt_entry *entry)
+{
+	u32 control = readl(entry->disc_table + CONTROL_OFFSET);
+
+	control &= ~CRASHLOG_FLAG_TRIGGER_MASK;
+	control |= CRASHLOG_FLAG_TRIGGER_EXECUTE;
+
+	writel(control, entry->disc_table + CONTROL_OFFSET);
+}
+
+/*
+ * sysfs
+ */
+static ssize_t
+enable_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct intel_pmt_entry *entry = dev_get_drvdata(dev);
+	int enabled = !pmt_crashlog_disabled(entry);
+
+	return sprintf(buf, "%d\n", enabled);
+}
+
+static ssize_t
+enable_store(struct device *dev, struct device_attribute *attr,
+	    const char *buf, size_t count)
+{
+	struct crashlog_entry *entry;
+	bool enabled;
+	int result;
+
+	entry = dev_get_drvdata(dev);
+
+	result = kstrtobool(buf, &enabled);
+	if (result)
+		return result;
+
+	mutex_lock(&entry->control_mutex);
+	pmt_crashlog_set_disable(&entry->entry, !enabled);
+	mutex_unlock(&entry->control_mutex);
+
+	return count;
+}
+static DEVICE_ATTR_RW(enable);
+
+static ssize_t
+trigger_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct intel_pmt_entry *entry;
+	int trigger;
+
+	entry = dev_get_drvdata(dev);
+	trigger = pmt_crashlog_complete(entry);
+
+	return sprintf(buf, "%d\n", trigger);
+}
+
+static ssize_t
+trigger_store(struct device *dev, struct device_attribute *attr,
+	    const char *buf, size_t count)
+{
+	struct crashlog_entry *entry;
+	bool trigger;
+	int result;
+
+	entry = dev_get_drvdata(dev);
+
+	result = kstrtobool(buf, &trigger);
+	if (result)
+		return result;
+
+	mutex_lock(&entry->control_mutex);
+
+	if (!trigger) {
+		pmt_crashlog_set_clear(&entry->entry);
+	} else if (pmt_crashlog_complete(&entry->entry)) {
+		/* we cannot trigger a new crash if one is still pending */
+		result = -EEXIST;
+		goto err;
+	} else if (pmt_crashlog_disabled(&entry->entry)) {
+		/* if device is currently disabled, return busy */
+		result = -EBUSY;
+		goto err;
+	} else {
+		pmt_crashlog_set_execute(&entry->entry);
+	}
+
+	result = count;
+err:
+	mutex_unlock(&entry->control_mutex);
+	return result;
+}
+static DEVICE_ATTR_RW(trigger);
+
+static struct attribute *pmt_crashlog_attrs[] = {
+	&dev_attr_enable.attr,
+	&dev_attr_trigger.attr,
+	NULL
+};
+
+static const struct attribute_group pmt_crashlog_group = {
+	.attrs	= pmt_crashlog_attrs,
+};
+
+static int pmt_crashlog_header_decode(struct intel_pmt_entry *entry,
+				      struct intel_pmt_header *header,
+				      struct device *dev)
+{
+	void __iomem *disc_table = entry->disc_table;
+	struct crashlog_entry *crashlog;
+
+	if (!pmt_crashlog_supported(entry))
+		return 1;
+
+	/* initialize control mutex */
+	crashlog = container_of(entry, struct crashlog_entry, entry);
+	mutex_init(&crashlog->control_mutex);
+
+	header->access_type = GET_ACCESS(readl(disc_table));
+	header->guid = readl(disc_table + GUID_OFFSET);
+	header->base_offset = readl(disc_table + BASE_OFFSET);
+
+	/* Size is measured in DWORDS, but accessor returns bytes */
+	header->size = GET_SIZE(readl(disc_table + SIZE_OFFSET));
+
+	return 0;
+}
+
+static DEFINE_XARRAY_ALLOC(crashlog_array);
+static struct intel_pmt_namespace pmt_crashlog_ns = {
+	.name = "crashlog",
+	.xa = &crashlog_array,
+	.attr_grp = &pmt_crashlog_group,
+	.pmt_header_decode = pmt_crashlog_header_decode,
+};
+
+/*
+ * initialization
+ */
+static void pmt_crashlog_remove(struct auxiliary_device *auxdev)
+{
+	struct pmt_crashlog_priv *priv = auxiliary_get_drvdata(auxdev);
+	int i;
+
+	for (i = 0; i < priv->num_entries; i++)
+		intel_pmt_dev_destroy(&priv->entry[i].entry, &pmt_crashlog_ns);
+}
+
+static int pmt_crashlog_probe(struct auxiliary_device *auxdev,
+			      const struct auxiliary_device_id *id)
+{
+	struct intel_vsec_device *intel_vsec_dev = auxdev_to_ivdev(auxdev);
+	struct pmt_crashlog_priv *priv;
+	size_t size;
+	int i, ret;
+
+	size = struct_size(priv, entry, intel_vsec_dev->num_resources);
+	priv = devm_kzalloc(&auxdev->dev, size, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	auxiliary_set_drvdata(auxdev, priv);
+
+	for (i = 0; i < intel_vsec_dev->num_resources; i++) {
+		struct intel_pmt_entry *entry = &priv->entry[priv->num_entries].entry;
+
+		ret = intel_pmt_dev_create(entry, &pmt_crashlog_ns, intel_vsec_dev, i);
+		if (ret < 0)
+			goto abort_probe;
+		if (ret)
+			continue;
+
+		priv->num_entries++;
+	}
+
+	return 0;
+abort_probe:
+	pmt_crashlog_remove(auxdev);
+	return ret;
+}
+
+static const struct auxiliary_device_id pmt_crashlog_id_table[] = {
+	{ .name = "intel_vsec.crashlog" },
+	{}
+};
+MODULE_DEVICE_TABLE(auxiliary, pmt_crashlog_id_table);
+
+static struct auxiliary_driver pmt_crashlog_aux_driver = {
+	.id_table	= pmt_crashlog_id_table,
+	.remove		= pmt_crashlog_remove,
+	.probe		= pmt_crashlog_probe,
+};
+
+static int __init pmt_crashlog_init(void)
+{
+	return auxiliary_driver_register(&pmt_crashlog_aux_driver);
+}
+
+static void __exit pmt_crashlog_exit(void)
+{
+	auxiliary_driver_unregister(&pmt_crashlog_aux_driver);
+	xa_destroy(&crashlog_array);
+}
+
+module_init(pmt_crashlog_init);
+module_exit(pmt_crashlog_exit);
+
+MODULE_AUTHOR("Alexander Duyck <alexander.h.duyck@linux.intel.com>");
+MODULE_DESCRIPTION("Intel PMT Crashlog driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/pmt/telemetry.c b/drivers/platform/x86/intel/pmt/telemetry.c
new file mode 100644
index 000000000..5e4009c05
--- /dev/null
+++ b/drivers/platform/x86/intel/pmt/telemetry.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Platform Monitory Technology Telemetry driver
+ *
+ * Copyright (c) 2020, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Author: "David E. Box" <david.e.box@linux.intel.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/overflow.h>
+
+#include "../vsec.h"
+#include "class.h"
+
+#define TELEM_SIZE_OFFSET	0x0
+#define TELEM_GUID_OFFSET	0x4
+#define TELEM_BASE_OFFSET	0x8
+#define TELEM_ACCESS(v)		((v) & GENMASK(3, 0))
+#define TELEM_TYPE(v)		(((v) & GENMASK(7, 4)) >> 4)
+/* size is in bytes */
+#define TELEM_SIZE(v)		(((v) & GENMASK(27, 12)) >> 10)
+
+/* Used by client hardware to identify a fixed telemetry entry*/
+#define TELEM_CLIENT_FIXED_BLOCK_GUID	0x10000000
+
+enum telem_type {
+	TELEM_TYPE_PUNIT = 0,
+	TELEM_TYPE_CRASHLOG,
+	TELEM_TYPE_PUNIT_FIXED,
+};
+
+struct pmt_telem_priv {
+	int				num_entries;
+	struct intel_pmt_entry		entry[];
+};
+
+static bool pmt_telem_region_overlaps(struct intel_pmt_entry *entry,
+				      struct device *dev)
+{
+	u32 guid = readl(entry->disc_table + TELEM_GUID_OFFSET);
+
+	if (intel_pmt_is_early_client_hw(dev)) {
+		u32 type = TELEM_TYPE(readl(entry->disc_table));
+
+		if ((type == TELEM_TYPE_PUNIT_FIXED) ||
+		    (guid == TELEM_CLIENT_FIXED_BLOCK_GUID))
+			return true;
+	}
+
+	return false;
+}
+
+static int pmt_telem_header_decode(struct intel_pmt_entry *entry,
+				   struct intel_pmt_header *header,
+				   struct device *dev)
+{
+	void __iomem *disc_table = entry->disc_table;
+
+	if (pmt_telem_region_overlaps(entry, dev))
+		return 1;
+
+	header->access_type = TELEM_ACCESS(readl(disc_table));
+	header->guid = readl(disc_table + TELEM_GUID_OFFSET);
+	header->base_offset = readl(disc_table + TELEM_BASE_OFFSET);
+
+	/* Size is measured in DWORDS, but accessor returns bytes */
+	header->size = TELEM_SIZE(readl(disc_table));
+
+	/*
+	 * Some devices may expose non-functioning entries that are
+	 * reserved for future use. They have zero size. Do not fail
+	 * probe for these. Just ignore them.
+	 */
+	if (header->size == 0)
+		return 1;
+
+	return 0;
+}
+
+static DEFINE_XARRAY_ALLOC(telem_array);
+static struct intel_pmt_namespace pmt_telem_ns = {
+	.name = "telem",
+	.xa = &telem_array,
+	.pmt_header_decode = pmt_telem_header_decode,
+};
+
+static void pmt_telem_remove(struct auxiliary_device *auxdev)
+{
+	struct pmt_telem_priv *priv = auxiliary_get_drvdata(auxdev);
+	int i;
+
+	for (i = 0; i < priv->num_entries; i++)
+		intel_pmt_dev_destroy(&priv->entry[i], &pmt_telem_ns);
+}
+
+static int pmt_telem_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id)
+{
+	struct intel_vsec_device *intel_vsec_dev = auxdev_to_ivdev(auxdev);
+	struct pmt_telem_priv *priv;
+	size_t size;
+	int i, ret;
+
+	size = struct_size(priv, entry, intel_vsec_dev->num_resources);
+	priv = devm_kzalloc(&auxdev->dev, size, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	auxiliary_set_drvdata(auxdev, priv);
+
+	for (i = 0; i < intel_vsec_dev->num_resources; i++) {
+		struct intel_pmt_entry *entry = &priv->entry[priv->num_entries];
+
+		ret = intel_pmt_dev_create(entry, &pmt_telem_ns, intel_vsec_dev, i);
+		if (ret < 0)
+			goto abort_probe;
+		if (ret)
+			continue;
+
+		priv->num_entries++;
+	}
+
+	return 0;
+abort_probe:
+	pmt_telem_remove(auxdev);
+	return ret;
+}
+
+static const struct auxiliary_device_id pmt_telem_id_table[] = {
+	{ .name = "intel_vsec.telemetry" },
+	{}
+};
+MODULE_DEVICE_TABLE(auxiliary, pmt_telem_id_table);
+
+static struct auxiliary_driver pmt_telem_aux_driver = {
+	.id_table	= pmt_telem_id_table,
+	.remove		= pmt_telem_remove,
+	.probe		= pmt_telem_probe,
+};
+
+static int __init pmt_telem_init(void)
+{
+	return auxiliary_driver_register(&pmt_telem_aux_driver);
+}
+module_init(pmt_telem_init);
+
+static void __exit pmt_telem_exit(void)
+{
+	auxiliary_driver_unregister(&pmt_telem_aux_driver);
+	xa_destroy(&telem_array);
+}
+module_exit(pmt_telem_exit);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("Intel PMT Telemetry driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/punit_ipc.c b/drivers/platform/x86/intel/punit_ipc.c
new file mode 100644
index 000000000..66bb39fd0
--- /dev/null
+++ b/drivers/platform/x86/intel/punit_ipc.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Intel P-Unit Mailbox IPC mechanism
+ *
+ * (C) Copyright 2015 Intel Corporation
+ *
+ * The heart of the P-Unit is the Foxton microcontroller and its firmware,
+ * which provide mailbox interface for power management usage.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/intel_punit_ipc.h>
+
+/* IPC Mailbox registers */
+#define OFFSET_DATA_LOW		0x0
+#define OFFSET_DATA_HIGH	0x4
+/* bit field of interface register */
+#define	CMD_RUN			BIT(31)
+#define	CMD_ERRCODE_MASK	GENMASK(7, 0)
+#define	CMD_PARA1_SHIFT		8
+#define	CMD_PARA2_SHIFT		16
+
+#define CMD_TIMEOUT_SECONDS	1
+
+enum {
+	BASE_DATA = 0,
+	BASE_IFACE,
+	BASE_MAX,
+};
+
+typedef struct {
+	struct device *dev;
+	struct mutex lock;
+	int irq;
+	struct completion cmd_complete;
+	/* base of interface and data registers */
+	void __iomem *base[RESERVED_IPC][BASE_MAX];
+	IPC_TYPE type;
+} IPC_DEV;
+
+static IPC_DEV *punit_ipcdev;
+
+static inline u32 ipc_read_status(IPC_DEV *ipcdev, IPC_TYPE type)
+{
+	return readl(ipcdev->base[type][BASE_IFACE]);
+}
+
+static inline void ipc_write_cmd(IPC_DEV *ipcdev, IPC_TYPE type, u32 cmd)
+{
+	writel(cmd, ipcdev->base[type][BASE_IFACE]);
+}
+
+static inline u32 ipc_read_data_low(IPC_DEV *ipcdev, IPC_TYPE type)
+{
+	return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW);
+}
+
+static inline u32 ipc_read_data_high(IPC_DEV *ipcdev, IPC_TYPE type)
+{
+	return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH);
+}
+
+static inline void ipc_write_data_low(IPC_DEV *ipcdev, IPC_TYPE type, u32 data)
+{
+	writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW);
+}
+
+static inline void ipc_write_data_high(IPC_DEV *ipcdev, IPC_TYPE type, u32 data)
+{
+	writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH);
+}
+
+static const char *ipc_err_string(int error)
+{
+	if (error == IPC_PUNIT_ERR_SUCCESS)
+		return "no error";
+	else if (error == IPC_PUNIT_ERR_INVALID_CMD)
+		return "invalid command";
+	else if (error == IPC_PUNIT_ERR_INVALID_PARAMETER)
+		return "invalid parameter";
+	else if (error == IPC_PUNIT_ERR_CMD_TIMEOUT)
+		return "command timeout";
+	else if (error == IPC_PUNIT_ERR_CMD_LOCKED)
+		return "command locked";
+	else if (error == IPC_PUNIT_ERR_INVALID_VR_ID)
+		return "invalid vr id";
+	else if (error == IPC_PUNIT_ERR_VR_ERR)
+		return "vr error";
+	else
+		return "unknown error";
+}
+
+static int intel_punit_ipc_check_status(IPC_DEV *ipcdev, IPC_TYPE type)
+{
+	int loops = CMD_TIMEOUT_SECONDS * USEC_PER_SEC;
+	int errcode;
+	int status;
+
+	if (ipcdev->irq) {
+		if (!wait_for_completion_timeout(&ipcdev->cmd_complete,
+						 CMD_TIMEOUT_SECONDS * HZ)) {
+			dev_err(ipcdev->dev, "IPC timed out\n");
+			return -ETIMEDOUT;
+		}
+	} else {
+		while ((ipc_read_status(ipcdev, type) & CMD_RUN) && --loops)
+			udelay(1);
+		if (!loops) {
+			dev_err(ipcdev->dev, "IPC timed out\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	status = ipc_read_status(ipcdev, type);
+	errcode = status & CMD_ERRCODE_MASK;
+	if (errcode) {
+		dev_err(ipcdev->dev, "IPC failed: %s, IPC_STS=0x%x\n",
+			ipc_err_string(errcode), status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * intel_punit_ipc_simple_command() - Simple IPC command
+ * @cmd:	IPC command code.
+ * @para1:	First 8bit parameter, set 0 if not used.
+ * @para2:	Second 8bit parameter, set 0 if not used.
+ *
+ * Send a IPC command to P-Unit when there is no data transaction
+ *
+ * Return:	IPC error code or 0 on success.
+ */
+int intel_punit_ipc_simple_command(int cmd, int para1, int para2)
+{
+	IPC_DEV *ipcdev = punit_ipcdev;
+	IPC_TYPE type;
+	u32 val;
+	int ret;
+
+	mutex_lock(&ipcdev->lock);
+
+	reinit_completion(&ipcdev->cmd_complete);
+	type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET;
+
+	val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK;
+	val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT;
+	ipc_write_cmd(ipcdev, type, val);
+	ret = intel_punit_ipc_check_status(ipcdev, type);
+
+	mutex_unlock(&ipcdev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(intel_punit_ipc_simple_command);
+
+/**
+ * intel_punit_ipc_command() - IPC command with data and pointers
+ * @cmd:	IPC command code.
+ * @para1:	First 8bit parameter, set 0 if not used.
+ * @para2:	Second 8bit parameter, set 0 if not used.
+ * @in:		Input data, 32bit for BIOS cmd, two 32bit for GTD and ISPD.
+ * @out:	Output data.
+ *
+ * Send a IPC command to P-Unit with data transaction
+ *
+ * Return:	IPC error code or 0 on success.
+ */
+int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out)
+{
+	IPC_DEV *ipcdev = punit_ipcdev;
+	IPC_TYPE type;
+	u32 val;
+	int ret;
+
+	mutex_lock(&ipcdev->lock);
+
+	reinit_completion(&ipcdev->cmd_complete);
+	type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET;
+
+	if (in) {
+		ipc_write_data_low(ipcdev, type, *in);
+		if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC)
+			ipc_write_data_high(ipcdev, type, *++in);
+	}
+
+	val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK;
+	val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT;
+	ipc_write_cmd(ipcdev, type, val);
+
+	ret = intel_punit_ipc_check_status(ipcdev, type);
+	if (ret)
+		goto out;
+
+	if (out) {
+		*out = ipc_read_data_low(ipcdev, type);
+		if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC)
+			*++out = ipc_read_data_high(ipcdev, type);
+	}
+
+out:
+	mutex_unlock(&ipcdev->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(intel_punit_ipc_command);
+
+static irqreturn_t intel_punit_ioc(int irq, void *dev_id)
+{
+	IPC_DEV *ipcdev = dev_id;
+
+	complete(&ipcdev->cmd_complete);
+	return IRQ_HANDLED;
+}
+
+static int intel_punit_get_bars(struct platform_device *pdev)
+{
+	void __iomem *addr;
+
+	/*
+	 * The following resources are required
+	 * - BIOS_IPC BASE_DATA
+	 * - BIOS_IPC BASE_IFACE
+	 */
+	addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+	punit_ipcdev->base[BIOS_IPC][BASE_DATA] = addr;
+
+	addr = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+	punit_ipcdev->base[BIOS_IPC][BASE_IFACE] = addr;
+
+	/*
+	 * The following resources are optional
+	 * - ISPDRIVER_IPC BASE_DATA
+	 * - ISPDRIVER_IPC BASE_IFACE
+	 * - GTDRIVER_IPC BASE_DATA
+	 * - GTDRIVER_IPC BASE_IFACE
+	 */
+	addr = devm_platform_ioremap_resource(pdev, 2);
+	if (!IS_ERR(addr))
+		punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr;
+
+	addr = devm_platform_ioremap_resource(pdev, 3);
+	if (!IS_ERR(addr))
+		punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr;
+
+	addr = devm_platform_ioremap_resource(pdev, 4);
+	if (!IS_ERR(addr))
+		punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr;
+
+	addr = devm_platform_ioremap_resource(pdev, 5);
+	if (!IS_ERR(addr))
+		punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr;
+
+	return 0;
+}
+
+static int intel_punit_ipc_probe(struct platform_device *pdev)
+{
+	int irq, ret;
+
+	punit_ipcdev = devm_kzalloc(&pdev->dev,
+				    sizeof(*punit_ipcdev), GFP_KERNEL);
+	if (!punit_ipcdev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, punit_ipcdev);
+
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq < 0) {
+		dev_warn(&pdev->dev, "Invalid IRQ, using polling mode\n");
+	} else {
+		ret = devm_request_irq(&pdev->dev, irq, intel_punit_ioc,
+				       IRQF_NO_SUSPEND, "intel_punit_ipc",
+				       &punit_ipcdev);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to request irq: %d\n", irq);
+			return ret;
+		}
+		punit_ipcdev->irq = irq;
+	}
+
+	ret = intel_punit_get_bars(pdev);
+	if (ret)
+		return ret;
+
+	punit_ipcdev->dev = &pdev->dev;
+	mutex_init(&punit_ipcdev->lock);
+	init_completion(&punit_ipcdev->cmd_complete);
+
+	return 0;
+}
+
+static int intel_punit_ipc_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct acpi_device_id punit_ipc_acpi_ids[] = {
+	{ "INT34D4", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, punit_ipc_acpi_ids);
+
+static struct platform_driver intel_punit_ipc_driver = {
+	.probe = intel_punit_ipc_probe,
+	.remove = intel_punit_ipc_remove,
+	.driver = {
+		.name = "intel_punit_ipc",
+		.acpi_match_table = punit_ipc_acpi_ids,
+	},
+};
+
+static int __init intel_punit_ipc_init(void)
+{
+	return platform_driver_register(&intel_punit_ipc_driver);
+}
+
+static void __exit intel_punit_ipc_exit(void)
+{
+	platform_driver_unregister(&intel_punit_ipc_driver);
+}
+
+MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
+MODULE_DESCRIPTION("Intel P-Unit IPC driver");
+MODULE_LICENSE("GPL v2");
+
+/* Some modules are dependent on this, so init earlier */
+fs_initcall(intel_punit_ipc_init);
+module_exit(intel_punit_ipc_exit);
diff --git a/drivers/platform/x86/intel/rst.c b/drivers/platform/x86/intel/rst.c
new file mode 100644
index 000000000..3b81cb896
--- /dev/null
+++ b/drivers/platform/x86/intel/rst.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright 2013 Matthew Garrett <mjg59@srcf.ucam.org>
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+MODULE_LICENSE("GPL");
+
+static ssize_t irst_show_wakeup_events(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct acpi_device *acpi;
+	unsigned long long value;
+	acpi_status status;
+
+	acpi = to_acpi_device(dev);
+
+	status = acpi_evaluate_integer(acpi->handle, "GFFS", NULL, &value);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return sprintf(buf, "%lld\n", value);
+}
+
+static ssize_t irst_store_wakeup_events(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct acpi_device *acpi;
+	acpi_status status;
+	unsigned long value;
+	int error;
+
+	acpi = to_acpi_device(dev);
+
+	error = kstrtoul(buf, 0, &value);
+	if (error)
+		return error;
+
+	status = acpi_execute_simple_method(acpi->handle, "SFFS", value);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return count;
+}
+
+static struct device_attribute irst_wakeup_attr = {
+	.attr = { .name = "wakeup_events", .mode = 0600 },
+	.show = irst_show_wakeup_events,
+	.store = irst_store_wakeup_events
+};
+
+static ssize_t irst_show_wakeup_time(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct acpi_device *acpi;
+	unsigned long long value;
+	acpi_status status;
+
+	acpi = to_acpi_device(dev);
+
+	status = acpi_evaluate_integer(acpi->handle, "GFTV", NULL, &value);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return sprintf(buf, "%lld\n", value);
+}
+
+static ssize_t irst_store_wakeup_time(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct acpi_device *acpi;
+	acpi_status status;
+	unsigned long value;
+	int error;
+
+	acpi = to_acpi_device(dev);
+
+	error = kstrtoul(buf, 0, &value);
+	if (error)
+		return error;
+
+	status = acpi_execute_simple_method(acpi->handle, "SFTV", value);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return count;
+}
+
+static struct device_attribute irst_timeout_attr = {
+	.attr = { .name = "wakeup_time", .mode = 0600 },
+	.show = irst_show_wakeup_time,
+	.store = irst_store_wakeup_time
+};
+
+static int irst_add(struct acpi_device *acpi)
+{
+	int error;
+
+	error = device_create_file(&acpi->dev, &irst_timeout_attr);
+	if (unlikely(error))
+		return error;
+
+	error = device_create_file(&acpi->dev, &irst_wakeup_attr);
+	if (unlikely(error))
+		device_remove_file(&acpi->dev, &irst_timeout_attr);
+
+	return error;
+}
+
+static int irst_remove(struct acpi_device *acpi)
+{
+	device_remove_file(&acpi->dev, &irst_wakeup_attr);
+	device_remove_file(&acpi->dev, &irst_timeout_attr);
+
+	return 0;
+}
+
+static const struct acpi_device_id irst_ids[] = {
+	{"INT3392", 0},
+	{"", 0}
+};
+
+static struct acpi_driver irst_driver = {
+	.owner = THIS_MODULE,
+	.name = "intel_rapid_start",
+	.class = "intel_rapid_start",
+	.ids = irst_ids,
+	.ops = {
+		.add = irst_add,
+		.remove = irst_remove,
+	},
+};
+
+module_acpi_driver(irst_driver);
+
+MODULE_DEVICE_TABLE(acpi, irst_ids);
diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c
new file mode 100644
index 000000000..c830e98df
--- /dev/null
+++ b/drivers/platform/x86/intel/sdsi.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Software Defined Silicon driver
+ *
+ * Copyright (c) 2022, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Author: "David E. Box" <david.e.box@linux.intel.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include "vsec.h"
+
+#define ACCESS_TYPE_BARID		2
+#define ACCESS_TYPE_LOCAL		3
+
+#define SDSI_MIN_SIZE_DWORDS		276
+#define SDSI_SIZE_CONTROL		8
+#define SDSI_SIZE_MAILBOX		1024
+#define SDSI_SIZE_REGS			72
+#define SDSI_SIZE_CMD			sizeof(u64)
+
+/*
+ * Write messages are currently up to the size of the mailbox
+ * while read messages are up to 4 times the size of the
+ * mailbox, sent in packets
+ */
+#define SDSI_SIZE_WRITE_MSG		SDSI_SIZE_MAILBOX
+#define SDSI_SIZE_READ_MSG		(SDSI_SIZE_MAILBOX * 4)
+
+#define SDSI_ENABLED_FEATURES_OFFSET	16
+#define SDSI_ENABLED			BIT(3)
+#define SDSI_SOCKET_ID_OFFSET		64
+#define SDSI_SOCKET_ID			GENMASK(3, 0)
+
+#define SDSI_MBOX_CMD_SUCCESS		0x40
+#define SDSI_MBOX_CMD_TIMEOUT		0x80
+
+#define MBOX_TIMEOUT_US			2000
+#define MBOX_TIMEOUT_ACQUIRE_US		1000
+#define MBOX_POLLING_PERIOD_US		100
+#define MBOX_ACQUIRE_NUM_RETRIES	5
+#define MBOX_ACQUIRE_RETRY_DELAY_MS	500
+#define MBOX_MAX_PACKETS		4
+
+#define MBOX_OWNER_NONE			0x00
+#define MBOX_OWNER_INBAND		0x01
+
+#define CTRL_RUN_BUSY			BIT(0)
+#define CTRL_READ_WRITE			BIT(1)
+#define CTRL_SOM			BIT(2)
+#define CTRL_EOM			BIT(3)
+#define CTRL_OWNER			GENMASK(5, 4)
+#define CTRL_COMPLETE			BIT(6)
+#define CTRL_READY			BIT(7)
+#define CTRL_STATUS			GENMASK(15, 8)
+#define CTRL_PACKET_SIZE		GENMASK(31, 16)
+#define CTRL_MSG_SIZE			GENMASK(63, 48)
+
+#define DISC_TABLE_SIZE			12
+#define DT_ACCESS_TYPE			GENMASK(3, 0)
+#define DT_SIZE				GENMASK(27, 12)
+#define DT_TBIR				GENMASK(2, 0)
+#define DT_OFFSET(v)			((v) & GENMASK(31, 3))
+
+enum sdsi_command {
+	SDSI_CMD_PROVISION_AKC		= 0x04,
+	SDSI_CMD_PROVISION_CAP		= 0x08,
+	SDSI_CMD_READ_STATE		= 0x10,
+};
+
+struct sdsi_mbox_info {
+	u64	*payload;
+	void	*buffer;
+	int	size;
+};
+
+struct disc_table {
+	u32	access_info;
+	u32	guid;
+	u32	offset;
+};
+
+struct sdsi_priv {
+	struct mutex		mb_lock;	/* Mailbox access lock */
+	struct device		*dev;
+	void __iomem		*control_addr;
+	void __iomem		*mbox_addr;
+	void __iomem		*regs_addr;
+	u32			guid;
+	bool			sdsi_enabled;
+};
+
+/* SDSi mailbox operations must be performed using 64bit mov instructions */
+static __always_inline void
+sdsi_memcpy64_toio(u64 __iomem *to, const u64 *from, size_t count_bytes)
+{
+	size_t count = count_bytes / sizeof(*to);
+	int i;
+
+	for (i = 0; i < count; i++)
+		writeq(from[i], &to[i]);
+}
+
+static __always_inline void
+sdsi_memcpy64_fromio(u64 *to, const u64 __iomem *from, size_t count_bytes)
+{
+	size_t count = count_bytes / sizeof(*to);
+	int i;
+
+	for (i = 0; i < count; i++)
+		to[i] = readq(&from[i]);
+}
+
+static inline void sdsi_complete_transaction(struct sdsi_priv *priv)
+{
+	u64 control = FIELD_PREP(CTRL_COMPLETE, 1);
+
+	lockdep_assert_held(&priv->mb_lock);
+	writeq(control, priv->control_addr);
+}
+
+static int sdsi_status_to_errno(u32 status)
+{
+	switch (status) {
+	case SDSI_MBOX_CMD_SUCCESS:
+		return 0;
+	case SDSI_MBOX_CMD_TIMEOUT:
+		return -ETIMEDOUT;
+	default:
+		return -EIO;
+	}
+}
+
+static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info,
+			      size_t *data_size)
+{
+	struct device *dev = priv->dev;
+	u32 total, loop, eom, status, message_size;
+	u64 control;
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Format and send the read command */
+	control = FIELD_PREP(CTRL_EOM, 1) |
+		  FIELD_PREP(CTRL_SOM, 1) |
+		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
+		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
+	writeq(control, priv->control_addr);
+
+	/* For reads, data sizes that are larger than the mailbox size are read in packets. */
+	total = 0;
+	loop = 0;
+	do {
+		void *buf = info->buffer + (SDSI_SIZE_MAILBOX * loop);
+		u32 packet_size;
+
+		/* Poll on ready bit */
+		ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY,
+					 MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US);
+		if (ret)
+			break;
+
+		eom = FIELD_GET(CTRL_EOM, control);
+		status = FIELD_GET(CTRL_STATUS, control);
+		packet_size = FIELD_GET(CTRL_PACKET_SIZE, control);
+		message_size = FIELD_GET(CTRL_MSG_SIZE, control);
+
+		ret = sdsi_status_to_errno(status);
+		if (ret)
+			break;
+
+		/* Only the last packet can be less than the mailbox size. */
+		if (!eom && packet_size != SDSI_SIZE_MAILBOX) {
+			dev_err(dev, "Invalid packet size\n");
+			ret = -EPROTO;
+			break;
+		}
+
+		if (packet_size > SDSI_SIZE_MAILBOX) {
+			dev_err(dev, "Packet size too large\n");
+			ret = -EPROTO;
+			break;
+		}
+
+		sdsi_memcpy64_fromio(buf, priv->mbox_addr, round_up(packet_size, SDSI_SIZE_CMD));
+
+		total += packet_size;
+
+		sdsi_complete_transaction(priv);
+	} while (!eom && ++loop < MBOX_MAX_PACKETS);
+
+	if (ret) {
+		sdsi_complete_transaction(priv);
+		return ret;
+	}
+
+	if (!eom) {
+		dev_err(dev, "Exceeded read attempts\n");
+		return -EPROTO;
+	}
+
+	/* Message size check is only valid for multi-packet transfers */
+	if (loop && total != message_size)
+		dev_warn(dev, "Read count %u differs from expected count %u\n",
+			 total, message_size);
+
+	*data_size = total;
+
+	return 0;
+}
+
+static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+{
+	u64 control;
+	u32 status;
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Write rest of the payload */
+	sdsi_memcpy64_toio(priv->mbox_addr + SDSI_SIZE_CMD, info->payload + 1,
+			   info->size - SDSI_SIZE_CMD);
+
+	/* Format and send the write command */
+	control = FIELD_PREP(CTRL_EOM, 1) |
+		  FIELD_PREP(CTRL_SOM, 1) |
+		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
+		  FIELD_PREP(CTRL_READ_WRITE, 1) |
+		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
+	writeq(control, priv->control_addr);
+
+	/* Poll on ready bit */
+	ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY,
+				 MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US);
+
+	if (ret)
+		goto release_mbox;
+
+	status = FIELD_GET(CTRL_STATUS, control);
+	ret = sdsi_status_to_errno(status);
+
+release_mbox:
+	sdsi_complete_transaction(priv);
+
+	return ret;
+}
+
+static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+{
+	u64 control;
+	u32 owner;
+	int ret, retries = 0;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Check mailbox is available */
+	control = readq(priv->control_addr);
+	owner = FIELD_GET(CTRL_OWNER, control);
+	if (owner != MBOX_OWNER_NONE)
+		return -EBUSY;
+
+	/*
+	 * If there has been no recent transaction and no one owns the mailbox,
+	 * we should acquire it in under 1ms. However, if we've accessed it
+	 * recently it may take up to 2.1 seconds to acquire it again.
+	 */
+	do {
+		/* Write first qword of payload */
+		writeq(info->payload[0], priv->mbox_addr);
+
+		/* Check for ownership */
+		ret = readq_poll_timeout(priv->control_addr, control,
+			FIELD_GET(CTRL_OWNER, control) == MBOX_OWNER_INBAND,
+			MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_ACQUIRE_US);
+
+		if (FIELD_GET(CTRL_OWNER, control) == MBOX_OWNER_NONE &&
+		    retries++ < MBOX_ACQUIRE_NUM_RETRIES) {
+			msleep(MBOX_ACQUIRE_RETRY_DELAY_MS);
+			continue;
+		}
+
+		/* Either we got it or someone else did. */
+		break;
+	} while (true);
+
+	return ret;
+}
+
+static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	ret = sdsi_mbox_acquire(priv, info);
+	if (ret)
+		return ret;
+
+	return sdsi_mbox_cmd_write(priv, info);
+}
+
+static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, size_t *data_size)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	ret = sdsi_mbox_acquire(priv, info);
+	if (ret)
+		return ret;
+
+	return sdsi_mbox_cmd_read(priv, info, data_size);
+}
+
+static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count,
+			      enum sdsi_command command)
+{
+	struct sdsi_mbox_info info;
+	int ret;
+
+	if (!priv->sdsi_enabled)
+		return -EPERM;
+
+	if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD))
+		return -EOVERFLOW;
+
+	/* Qword aligned message + command qword */
+	info.size = round_up(count, SDSI_SIZE_CMD) + SDSI_SIZE_CMD;
+
+	info.payload = kzalloc(info.size, GFP_KERNEL);
+	if (!info.payload)
+		return -ENOMEM;
+
+	/* Copy message to payload buffer */
+	memcpy(info.payload, buf, count);
+
+	/* Command is last qword of payload buffer */
+	info.payload[(info.size - SDSI_SIZE_CMD) / SDSI_SIZE_CMD] = command;
+
+	ret = mutex_lock_interruptible(&priv->mb_lock);
+	if (ret)
+		goto free_payload;
+	ret = sdsi_mbox_write(priv, &info);
+	mutex_unlock(&priv->mb_lock);
+
+free_payload:
+	kfree(info.payload);
+
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t provision_akc_write(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf, loff_t off,
+				   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	if (off)
+		return -ESPIPE;
+
+	return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_AKC);
+}
+static BIN_ATTR_WO(provision_akc, SDSI_SIZE_WRITE_MSG);
+
+static ssize_t provision_cap_write(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf, loff_t off,
+				   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	if (off)
+		return -ESPIPE;
+
+	return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_CAP);
+}
+static BIN_ATTR_WO(provision_cap, SDSI_SIZE_WRITE_MSG);
+
+static long state_certificate_read(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf, loff_t off,
+				   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+	u64 command = SDSI_CMD_READ_STATE;
+	struct sdsi_mbox_info info;
+	size_t size;
+	int ret;
+
+	if (!priv->sdsi_enabled)
+		return -EPERM;
+
+	if (off)
+		return 0;
+
+	/* Buffer for return data */
+	info.buffer = kmalloc(SDSI_SIZE_READ_MSG, GFP_KERNEL);
+	if (!info.buffer)
+		return -ENOMEM;
+
+	info.payload = &command;
+	info.size = sizeof(command);
+
+	ret = mutex_lock_interruptible(&priv->mb_lock);
+	if (ret)
+		goto free_buffer;
+	ret = sdsi_mbox_read(priv, &info, &size);
+	mutex_unlock(&priv->mb_lock);
+	if (ret < 0)
+		goto free_buffer;
+
+	if (size > count)
+		size = count;
+
+	memcpy(buf, info.buffer, size);
+
+free_buffer:
+	kfree(info.buffer);
+
+	if (ret)
+		return ret;
+
+	return size;
+}
+static BIN_ATTR(state_certificate, 0400, state_certificate_read, NULL, SDSI_SIZE_READ_MSG);
+
+static ssize_t registers_read(struct file *filp, struct kobject *kobj,
+			      struct bin_attribute *attr, char *buf, loff_t off,
+			      size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+	void __iomem *addr = priv->regs_addr;
+
+	memcpy_fromio(buf, addr + off, count);
+
+	return count;
+}
+static BIN_ATTR(registers, 0400, registers_read, NULL, SDSI_SIZE_REGS);
+
+static struct bin_attribute *sdsi_bin_attrs[] = {
+	&bin_attr_registers,
+	&bin_attr_state_certificate,
+	&bin_attr_provision_akc,
+	&bin_attr_provision_cap,
+	NULL
+};
+
+static ssize_t guid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "0x%x\n", priv->guid);
+}
+static DEVICE_ATTR_RO(guid);
+
+static struct attribute *sdsi_attrs[] = {
+	&dev_attr_guid.attr,
+	NULL
+};
+
+static const struct attribute_group sdsi_group = {
+	.attrs = sdsi_attrs,
+	.bin_attrs = sdsi_bin_attrs,
+};
+__ATTRIBUTE_GROUPS(sdsi);
+
+static int sdsi_map_mbox_registers(struct sdsi_priv *priv, struct pci_dev *parent,
+				   struct disc_table *disc_table, struct resource *disc_res)
+{
+	u32 access_type = FIELD_GET(DT_ACCESS_TYPE, disc_table->access_info);
+	u32 size = FIELD_GET(DT_SIZE, disc_table->access_info);
+	u32 tbir = FIELD_GET(DT_TBIR, disc_table->offset);
+	u32 offset = DT_OFFSET(disc_table->offset);
+	u32 features_offset;
+	struct resource res = {};
+
+	/* Starting location of SDSi MMIO region based on access type */
+	switch (access_type) {
+	case ACCESS_TYPE_LOCAL:
+		if (tbir) {
+			dev_err(priv->dev, "Unsupported BAR index %u for access type %u\n",
+				tbir, access_type);
+			return -EINVAL;
+		}
+
+		/*
+		 * For access_type LOCAL, the base address is as follows:
+		 * base address = end of discovery region + base offset + 1
+		 */
+		res.start = disc_res->end + offset + 1;
+		break;
+
+	case ACCESS_TYPE_BARID:
+		res.start = pci_resource_start(parent, tbir) + offset;
+		break;
+
+	default:
+		dev_err(priv->dev, "Unrecognized access_type %u\n", access_type);
+		return -EINVAL;
+	}
+
+	res.end = res.start + size * sizeof(u32) - 1;
+	res.flags = IORESOURCE_MEM;
+
+	priv->control_addr = devm_ioremap_resource(priv->dev, &res);
+	if (IS_ERR(priv->control_addr))
+		return PTR_ERR(priv->control_addr);
+
+	priv->mbox_addr = priv->control_addr + SDSI_SIZE_CONTROL;
+	priv->regs_addr = priv->mbox_addr + SDSI_SIZE_MAILBOX;
+
+	features_offset = readq(priv->regs_addr + SDSI_ENABLED_FEATURES_OFFSET);
+	priv->sdsi_enabled = !!(features_offset & SDSI_ENABLED);
+
+	return 0;
+}
+
+static int sdsi_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id)
+{
+	struct intel_vsec_device *intel_cap_dev = auxdev_to_ivdev(auxdev);
+	struct disc_table disc_table;
+	struct resource *disc_res;
+	void __iomem *disc_addr;
+	struct sdsi_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&auxdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &auxdev->dev;
+	mutex_init(&priv->mb_lock);
+	auxiliary_set_drvdata(auxdev, priv);
+
+	/* Get the SDSi discovery table */
+	disc_res = &intel_cap_dev->resource[0];
+	disc_addr = devm_ioremap_resource(&auxdev->dev, disc_res);
+	if (IS_ERR(disc_addr))
+		return PTR_ERR(disc_addr);
+
+	memcpy_fromio(&disc_table, disc_addr, DISC_TABLE_SIZE);
+
+	priv->guid = disc_table.guid;
+
+	/* Map the SDSi mailbox registers */
+	ret = sdsi_map_mbox_registers(priv, intel_cap_dev->pcidev, &disc_table, disc_res);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct auxiliary_device_id sdsi_aux_id_table[] = {
+	{ .name = "intel_vsec.sdsi" },
+	{}
+};
+MODULE_DEVICE_TABLE(auxiliary, sdsi_aux_id_table);
+
+static struct auxiliary_driver sdsi_aux_driver = {
+	.driver = {
+		.dev_groups = sdsi_groups,
+	},
+	.id_table	= sdsi_aux_id_table,
+	.probe		= sdsi_probe,
+	/* No remove. All resources are handled under devm */
+};
+module_auxiliary_driver(sdsi_aux_driver);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("Intel Software Defined Silicon driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel/smartconnect.c b/drivers/platform/x86/intel/smartconnect.c
new file mode 100644
index 000000000..64c2dc934
--- /dev/null
+++ b/drivers/platform/x86/intel/smartconnect.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright 2013 Matthew Garrett <mjg59@srcf.ucam.org>
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+
+MODULE_LICENSE("GPL");
+
+static int smartconnect_acpi_init(struct acpi_device *acpi)
+{
+	unsigned long long value;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(acpi->handle, "GAOS", NULL, &value);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	if (value & 0x1) {
+		dev_info(&acpi->dev, "Disabling Intel Smart Connect\n");
+		status = acpi_execute_simple_method(acpi->handle, "SAOS", 0);
+	}
+
+	return 0;
+}
+
+static const struct acpi_device_id smartconnect_ids[] = {
+	{"INT33A0", 0},
+	{"", 0}
+};
+MODULE_DEVICE_TABLE(acpi, smartconnect_ids);
+
+static struct acpi_driver smartconnect_driver = {
+	.owner = THIS_MODULE,
+	.name = "intel_smart_connect",
+	.class = "intel_smart_connect",
+	.ids = smartconnect_ids,
+	.ops = {
+		.add = smartconnect_acpi_init,
+	},
+};
+
+module_acpi_driver(smartconnect_driver);
diff --git a/drivers/platform/x86/intel/speed_select_if/Kconfig b/drivers/platform/x86/intel/speed_select_if/Kconfig
new file mode 100644
index 000000000..ce3e3dc07
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/Kconfig
@@ -0,0 +1,17 @@
+menu "Intel Speed Select Technology interface support"
+	depends on PCI
+	depends on X86_64 || COMPILE_TEST
+
+config INTEL_SPEED_SELECT_INTERFACE
+	tristate "Intel(R) Speed Select Technology interface drivers"
+	help
+	  This config enables the Intel(R) Speed Select Technology interface
+	  drivers. The Intel(R) speed select technology features are non
+	  architectural and only supported on specific Xeon(R) servers.
+	  These drivers provide interface to directly communicate with hardware
+	  via MMIO and Mail boxes to enumerate and control all the speed select
+	  features.
+
+	  Enable this config, if there is a need to enable and control the
+	  Intel(R) Speed Select Technology features from the user space.
+endmenu
diff --git a/drivers/platform/x86/intel/speed_select_if/Makefile b/drivers/platform/x86/intel/speed_select_if/Makefile
new file mode 100644
index 000000000..856076206
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile - Intel Speed Select Interface drivers
+# Copyright (c) 2019, Intel Corporation.
+#
+
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_common.o
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mmio.o
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mbox_pci.o
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mbox_msr.o
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
new file mode 100644
index 000000000..f6b32d31c
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select Interface: Common functions
+ * Copyright (c) 2019, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+
+#include <linux/cpufeature.h>
+#include <linux/cpuhotplug.h>
+#include <linux/fs.h>
+#include <linux/hashtable.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <uapi/linux/isst_if.h>
+
+#include "isst_if_common.h"
+
+#define MSR_THREAD_ID_INFO	0x53
+#define MSR_CPU_BUS_NUMBER	0x128
+
+static struct isst_if_cmd_cb punit_callbacks[ISST_IF_DEV_MAX];
+
+static int punit_msr_white_list[] = {
+	MSR_TURBO_RATIO_LIMIT,
+	MSR_CONFIG_TDP_CONTROL,
+	MSR_TURBO_RATIO_LIMIT1,
+	MSR_TURBO_RATIO_LIMIT2,
+};
+
+struct isst_valid_cmd_ranges {
+	u16 cmd;
+	u16 sub_cmd_beg;
+	u16 sub_cmd_end;
+};
+
+struct isst_cmd_set_req_type {
+	u16 cmd;
+	u16 sub_cmd;
+	u16 param;
+};
+
+static const struct isst_valid_cmd_ranges isst_valid_cmds[] = {
+	{0xD0, 0x00, 0x03},
+	{0x7F, 0x00, 0x0B},
+	{0x7F, 0x10, 0x12},
+	{0x7F, 0x20, 0x23},
+	{0x94, 0x03, 0x03},
+	{0x95, 0x03, 0x03},
+};
+
+static const struct isst_cmd_set_req_type isst_cmd_set_reqs[] = {
+	{0xD0, 0x00, 0x08},
+	{0xD0, 0x01, 0x08},
+	{0xD0, 0x02, 0x08},
+	{0xD0, 0x03, 0x08},
+	{0x7F, 0x02, 0x00},
+	{0x7F, 0x08, 0x00},
+	{0x95, 0x03, 0x03},
+};
+
+struct isst_cmd {
+	struct hlist_node hnode;
+	u64 data;
+	u32 cmd;
+	int cpu;
+	int mbox_cmd_type;
+	u32 param;
+};
+
+static DECLARE_HASHTABLE(isst_hash, 8);
+static DEFINE_MUTEX(isst_hash_lock);
+
+static int isst_store_new_cmd(int cmd, u32 cpu, int mbox_cmd_type, u32 param,
+			      u32 data)
+{
+	struct isst_cmd *sst_cmd;
+
+	sst_cmd = kmalloc(sizeof(*sst_cmd), GFP_KERNEL);
+	if (!sst_cmd)
+		return -ENOMEM;
+
+	sst_cmd->cpu = cpu;
+	sst_cmd->cmd = cmd;
+	sst_cmd->mbox_cmd_type = mbox_cmd_type;
+	sst_cmd->param = param;
+	sst_cmd->data = data;
+
+	hash_add(isst_hash, &sst_cmd->hnode, sst_cmd->cmd);
+
+	return 0;
+}
+
+static void isst_delete_hash(void)
+{
+	struct isst_cmd *sst_cmd;
+	struct hlist_node *tmp;
+	int i;
+
+	hash_for_each_safe(isst_hash, i, tmp, sst_cmd, hnode) {
+		hash_del(&sst_cmd->hnode);
+		kfree(sst_cmd);
+	}
+}
+
+/**
+ * isst_store_cmd() - Store command to a hash table
+ * @cmd: Mailbox command.
+ * @sub_cmd: Mailbox sub-command or MSR id.
+ * @mbox_cmd_type: Mailbox or MSR command.
+ * @param: Mailbox parameter.
+ * @data: Mailbox request data or MSR data.
+ *
+ * Stores the command to a hash table if there is no such command already
+ * stored. If already stored update the latest parameter and data for the
+ * command.
+ *
+ * Return: Return result of store to hash table, 0 for success, others for
+ * failure.
+ */
+int isst_store_cmd(int cmd, int sub_cmd, u32 cpu, int mbox_cmd_type,
+		   u32 param, u64 data)
+{
+	struct isst_cmd *sst_cmd;
+	int full_cmd, ret;
+
+	full_cmd = (cmd & GENMASK_ULL(15, 0)) << 16;
+	full_cmd |= (sub_cmd & GENMASK_ULL(15, 0));
+	mutex_lock(&isst_hash_lock);
+	hash_for_each_possible(isst_hash, sst_cmd, hnode, full_cmd) {
+		if (sst_cmd->cmd == full_cmd && sst_cmd->cpu == cpu &&
+		    sst_cmd->mbox_cmd_type == mbox_cmd_type) {
+			sst_cmd->param = param;
+			sst_cmd->data = data;
+			mutex_unlock(&isst_hash_lock);
+			return 0;
+		}
+	}
+
+	ret = isst_store_new_cmd(full_cmd, cpu, mbox_cmd_type, param, data);
+	mutex_unlock(&isst_hash_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(isst_store_cmd);
+
+static void isst_mbox_resume_command(struct isst_if_cmd_cb *cb,
+				     struct isst_cmd *sst_cmd)
+{
+	struct isst_if_mbox_cmd mbox_cmd;
+	int wr_only;
+
+	mbox_cmd.command = (sst_cmd->cmd & GENMASK_ULL(31, 16)) >> 16;
+	mbox_cmd.sub_command = sst_cmd->cmd & GENMASK_ULL(15, 0);
+	mbox_cmd.parameter = sst_cmd->param;
+	mbox_cmd.req_data = sst_cmd->data;
+	mbox_cmd.logical_cpu = sst_cmd->cpu;
+	(cb->cmd_callback)((u8 *)&mbox_cmd, &wr_only, 1);
+}
+
+/**
+ * isst_resume_common() - Process Resume request
+ *
+ * On resume replay all mailbox commands and MSRs.
+ *
+ * Return: None.
+ */
+void isst_resume_common(void)
+{
+	struct isst_cmd *sst_cmd;
+	int i;
+
+	hash_for_each(isst_hash, i, sst_cmd, hnode) {
+		struct isst_if_cmd_cb *cb;
+
+		if (sst_cmd->mbox_cmd_type) {
+			cb = &punit_callbacks[ISST_IF_DEV_MBOX];
+			if (cb->registered)
+				isst_mbox_resume_command(cb, sst_cmd);
+		} else {
+			wrmsrl_safe_on_cpu(sst_cmd->cpu, sst_cmd->cmd,
+					   sst_cmd->data);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(isst_resume_common);
+
+static void isst_restore_msr_local(int cpu)
+{
+	struct isst_cmd *sst_cmd;
+	int i;
+
+	mutex_lock(&isst_hash_lock);
+	for (i = 0; i < ARRAY_SIZE(punit_msr_white_list); ++i) {
+		if (!punit_msr_white_list[i])
+			break;
+
+		hash_for_each_possible(isst_hash, sst_cmd, hnode,
+				       punit_msr_white_list[i]) {
+			if (!sst_cmd->mbox_cmd_type && sst_cmd->cpu == cpu)
+				wrmsrl_safe(sst_cmd->cmd, sst_cmd->data);
+		}
+	}
+	mutex_unlock(&isst_hash_lock);
+}
+
+/**
+ * isst_if_mbox_cmd_invalid() - Check invalid mailbox commands
+ * @cmd: Pointer to the command structure to verify.
+ *
+ * Invalid command to PUNIT to may result in instability of the platform.
+ * This function has a whitelist of commands, which are allowed.
+ *
+ * Return: Return true if the command is invalid, else false.
+ */
+bool isst_if_mbox_cmd_invalid(struct isst_if_mbox_cmd *cmd)
+{
+	int i;
+
+	if (cmd->logical_cpu >= nr_cpu_ids)
+		return true;
+
+	for (i = 0; i < ARRAY_SIZE(isst_valid_cmds); ++i) {
+		if (cmd->command == isst_valid_cmds[i].cmd &&
+		    (cmd->sub_command >= isst_valid_cmds[i].sub_cmd_beg &&
+		     cmd->sub_command <= isst_valid_cmds[i].sub_cmd_end)) {
+			return false;
+		}
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(isst_if_mbox_cmd_invalid);
+
+/**
+ * isst_if_mbox_cmd_set_req() - Check mailbox command is a set request
+ * @cmd: Pointer to the command structure to verify.
+ *
+ * Check if the given mail box level is set request and not a get request.
+ *
+ * Return: Return true if the command is set_req, else false.
+ */
+bool isst_if_mbox_cmd_set_req(struct isst_if_mbox_cmd *cmd)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(isst_cmd_set_reqs); ++i) {
+		if (cmd->command == isst_cmd_set_reqs[i].cmd &&
+		    cmd->sub_command == isst_cmd_set_reqs[i].sub_cmd &&
+		    cmd->parameter == isst_cmd_set_reqs[i].param) {
+			return true;
+		}
+	}
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(isst_if_mbox_cmd_set_req);
+
+static int isst_if_get_platform_info(void __user *argp)
+{
+	struct isst_if_platform_info info;
+
+	info.api_version = ISST_IF_API_VERSION;
+	info.driver_version = ISST_IF_DRIVER_VERSION;
+	info.max_cmds_per_ioctl = ISST_IF_CMD_LIMIT;
+	info.mbox_supported = punit_callbacks[ISST_IF_DEV_MBOX].registered;
+	info.mmio_supported = punit_callbacks[ISST_IF_DEV_MMIO].registered;
+
+	if (copy_to_user(argp, &info, sizeof(info)))
+		return -EFAULT;
+
+	return 0;
+}
+
+#define ISST_MAX_BUS_NUMBER	2
+
+struct isst_if_cpu_info {
+	/* For BUS 0 and BUS 1 only, which we need for PUNIT interface */
+	int bus_info[ISST_MAX_BUS_NUMBER];
+	struct pci_dev *pci_dev[ISST_MAX_BUS_NUMBER];
+	int punit_cpu_id;
+	int numa_node;
+};
+
+struct isst_if_pkg_info {
+	struct pci_dev *pci_dev[ISST_MAX_BUS_NUMBER];
+};
+
+static struct isst_if_cpu_info *isst_cpu_info;
+static struct isst_if_pkg_info *isst_pkg_info;
+
+static struct pci_dev *_isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn)
+{
+	struct pci_dev *matched_pci_dev = NULL;
+	struct pci_dev *pci_dev = NULL;
+	struct pci_dev *_pci_dev = NULL;
+	int no_matches = 0, pkg_id;
+	int bus_number;
+
+	if (bus_no < 0 || bus_no >= ISST_MAX_BUS_NUMBER || cpu < 0 ||
+	    cpu >= nr_cpu_ids || cpu >= num_possible_cpus())
+		return NULL;
+
+	pkg_id = topology_physical_package_id(cpu);
+
+	bus_number = isst_cpu_info[cpu].bus_info[bus_no];
+	if (bus_number < 0)
+		return NULL;
+
+	for_each_pci_dev(_pci_dev) {
+		int node;
+
+		if (_pci_dev->bus->number != bus_number ||
+		    _pci_dev->devfn != PCI_DEVFN(dev, fn))
+			continue;
+
+		++no_matches;
+		if (!matched_pci_dev)
+			matched_pci_dev = _pci_dev;
+
+		node = dev_to_node(&_pci_dev->dev);
+		if (node == NUMA_NO_NODE) {
+			pr_info("Fail to get numa node for CPU:%d bus:%d dev:%d fn:%d\n",
+				cpu, bus_no, dev, fn);
+			continue;
+		}
+
+		if (node == isst_cpu_info[cpu].numa_node) {
+			isst_pkg_info[pkg_id].pci_dev[bus_no] = _pci_dev;
+
+			pci_dev = _pci_dev;
+			break;
+		}
+	}
+
+	/*
+	 * If there is no numa matched pci_dev, then there can be following cases:
+	 * 1. CONFIG_NUMA is not defined: In this case if there is only single device
+	 *    match, then we don't need numa information. Simply return last match.
+	 *    Othewise return NULL.
+	 * 2. NUMA information is not exposed via _SEG method. In this case it is similar
+	 *    to case 1.
+	 * 3. Numa information doesn't match with CPU numa node and more than one match
+	 *    return NULL.
+	 */
+	if (!pci_dev && no_matches == 1)
+		pci_dev = matched_pci_dev;
+
+	/* Return pci_dev pointer for any matched CPU in the package */
+	if (!pci_dev)
+		pci_dev = isst_pkg_info[pkg_id].pci_dev[bus_no];
+
+	return pci_dev;
+}
+
+/**
+ * isst_if_get_pci_dev() - Get the PCI device instance for a CPU
+ * @cpu: Logical CPU number.
+ * @bus_number: The bus number assigned by the hardware.
+ * @dev: The device number assigned by the hardware.
+ * @fn: The function number assigned by the hardware.
+ *
+ * Using cached bus information, find out the PCI device for a bus number,
+ * device and function.
+ *
+ * Return: Return pci_dev pointer or NULL.
+ */
+struct pci_dev *isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn)
+{
+	struct pci_dev *pci_dev;
+
+	if (bus_no < 0 || bus_no >= ISST_MAX_BUS_NUMBER  || cpu < 0 ||
+	    cpu >= nr_cpu_ids || cpu >= num_possible_cpus())
+		return NULL;
+
+	pci_dev = isst_cpu_info[cpu].pci_dev[bus_no];
+
+	if (pci_dev && pci_dev->devfn == PCI_DEVFN(dev, fn))
+		return pci_dev;
+
+	return _isst_if_get_pci_dev(cpu, bus_no, dev, fn);
+}
+EXPORT_SYMBOL_GPL(isst_if_get_pci_dev);
+
+static int isst_if_cpu_online(unsigned int cpu)
+{
+	u64 data;
+	int ret;
+
+	isst_cpu_info[cpu].numa_node = cpu_to_node(cpu);
+
+	ret = rdmsrl_safe(MSR_CPU_BUS_NUMBER, &data);
+	if (ret) {
+		/* This is not a fatal error on MSR mailbox only I/F */
+		isst_cpu_info[cpu].bus_info[0] = -1;
+		isst_cpu_info[cpu].bus_info[1] = -1;
+	} else {
+		isst_cpu_info[cpu].bus_info[0] = data & 0xff;
+		isst_cpu_info[cpu].bus_info[1] = (data >> 8) & 0xff;
+		isst_cpu_info[cpu].pci_dev[0] = _isst_if_get_pci_dev(cpu, 0, 0, 1);
+		isst_cpu_info[cpu].pci_dev[1] = _isst_if_get_pci_dev(cpu, 1, 30, 1);
+	}
+
+	ret = rdmsrl_safe(MSR_THREAD_ID_INFO, &data);
+	if (ret) {
+		isst_cpu_info[cpu].punit_cpu_id = -1;
+		return ret;
+	}
+	isst_cpu_info[cpu].punit_cpu_id = data;
+
+	isst_restore_msr_local(cpu);
+
+	return 0;
+}
+
+static int isst_if_online_id;
+
+static int isst_if_cpu_info_init(void)
+{
+	int ret;
+
+	isst_cpu_info = kcalloc(num_possible_cpus(),
+				sizeof(*isst_cpu_info),
+				GFP_KERNEL);
+	if (!isst_cpu_info)
+		return -ENOMEM;
+
+	isst_pkg_info = kcalloc(topology_max_packages(),
+				sizeof(*isst_pkg_info),
+				GFP_KERNEL);
+	if (!isst_pkg_info) {
+		kfree(isst_cpu_info);
+		return -ENOMEM;
+	}
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				"platform/x86/isst-if:online",
+				isst_if_cpu_online, NULL);
+	if (ret < 0) {
+		kfree(isst_pkg_info);
+		kfree(isst_cpu_info);
+		return ret;
+	}
+
+	isst_if_online_id = ret;
+
+	return 0;
+}
+
+static void isst_if_cpu_info_exit(void)
+{
+	cpuhp_remove_state(isst_if_online_id);
+	kfree(isst_pkg_info);
+	kfree(isst_cpu_info);
+};
+
+static long isst_if_proc_phyid_req(u8 *cmd_ptr, int *write_only, int resume)
+{
+	struct isst_if_cpu_map *cpu_map;
+
+	cpu_map = (struct isst_if_cpu_map *)cmd_ptr;
+	if (cpu_map->logical_cpu >= nr_cpu_ids ||
+	    cpu_map->logical_cpu >= num_possible_cpus())
+		return -EINVAL;
+
+	*write_only = 0;
+	cpu_map->physical_cpu = isst_cpu_info[cpu_map->logical_cpu].punit_cpu_id;
+
+	return 0;
+}
+
+static bool match_punit_msr_white_list(int msr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(punit_msr_white_list); ++i) {
+		if (punit_msr_white_list[i] == msr)
+			return true;
+	}
+
+	return false;
+}
+
+static long isst_if_msr_cmd_req(u8 *cmd_ptr, int *write_only, int resume)
+{
+	struct isst_if_msr_cmd *msr_cmd;
+	int ret;
+
+	msr_cmd = (struct isst_if_msr_cmd *)cmd_ptr;
+
+	if (!match_punit_msr_white_list(msr_cmd->msr))
+		return -EINVAL;
+
+	if (msr_cmd->logical_cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	if (msr_cmd->read_write) {
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		ret = wrmsrl_safe_on_cpu(msr_cmd->logical_cpu,
+					 msr_cmd->msr,
+					 msr_cmd->data);
+		*write_only = 1;
+		if (!ret && !resume)
+			ret = isst_store_cmd(0, msr_cmd->msr,
+					     msr_cmd->logical_cpu,
+					     0, 0, msr_cmd->data);
+	} else {
+		u64 data;
+
+		ret = rdmsrl_safe_on_cpu(msr_cmd->logical_cpu,
+					 msr_cmd->msr, &data);
+		if (!ret) {
+			msr_cmd->data = data;
+			*write_only = 0;
+		}
+	}
+
+
+	return ret;
+}
+
+static long isst_if_exec_multi_cmd(void __user *argp, struct isst_if_cmd_cb *cb)
+{
+	unsigned char __user *ptr;
+	u32 cmd_count;
+	u8 *cmd_ptr;
+	long ret;
+	int i;
+
+	/* Each multi command has u32 command count as the first field */
+	if (copy_from_user(&cmd_count, argp, sizeof(cmd_count)))
+		return -EFAULT;
+
+	if (!cmd_count || cmd_count > ISST_IF_CMD_LIMIT)
+		return -EINVAL;
+
+	cmd_ptr = kmalloc(cb->cmd_size, GFP_KERNEL);
+	if (!cmd_ptr)
+		return -ENOMEM;
+
+	/* cb->offset points to start of the command after the command count */
+	ptr = argp + cb->offset;
+
+	for (i = 0; i < cmd_count; ++i) {
+		int wr_only;
+
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+
+		if (copy_from_user(cmd_ptr, ptr, cb->cmd_size)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		ret = cb->cmd_callback(cmd_ptr, &wr_only, 0);
+		if (ret)
+			break;
+
+		if (!wr_only && copy_to_user(ptr, cmd_ptr, cb->cmd_size)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		ptr += cb->cmd_size;
+	}
+
+	kfree(cmd_ptr);
+
+	return i ? i : ret;
+}
+
+static long isst_if_def_ioctl(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	struct isst_if_cmd_cb cmd_cb;
+	struct isst_if_cmd_cb *cb;
+	long ret = -ENOTTY;
+
+	switch (cmd) {
+	case ISST_IF_GET_PLATFORM_INFO:
+		ret = isst_if_get_platform_info(argp);
+		break;
+	case ISST_IF_GET_PHY_ID:
+		cmd_cb.cmd_size = sizeof(struct isst_if_cpu_map);
+		cmd_cb.offset = offsetof(struct isst_if_cpu_maps, cpu_map);
+		cmd_cb.cmd_callback = isst_if_proc_phyid_req;
+		ret = isst_if_exec_multi_cmd(argp, &cmd_cb);
+		break;
+	case ISST_IF_IO_CMD:
+		cb = &punit_callbacks[ISST_IF_DEV_MMIO];
+		if (cb->registered)
+			ret = isst_if_exec_multi_cmd(argp, cb);
+		break;
+	case ISST_IF_MBOX_COMMAND:
+		cb = &punit_callbacks[ISST_IF_DEV_MBOX];
+		if (cb->registered)
+			ret = isst_if_exec_multi_cmd(argp, cb);
+		break;
+	case ISST_IF_MSR_COMMAND:
+		cmd_cb.cmd_size = sizeof(struct isst_if_msr_cmd);
+		cmd_cb.offset = offsetof(struct isst_if_msr_cmds, msr_cmd);
+		cmd_cb.cmd_callback = isst_if_msr_cmd_req;
+		ret = isst_if_exec_multi_cmd(argp, &cmd_cb);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Lock to prevent module registration when already opened by user space */
+static DEFINE_MUTEX(punit_misc_dev_open_lock);
+/* Lock to allow one share misc device for all ISST interace */
+static DEFINE_MUTEX(punit_misc_dev_reg_lock);
+static int misc_usage_count;
+static int misc_device_ret;
+static int misc_device_open;
+
+static int isst_if_open(struct inode *inode, struct file *file)
+{
+	int i, ret = 0;
+
+	/* Fail open, if a module is going away */
+	mutex_lock(&punit_misc_dev_open_lock);
+	for (i = 0; i < ISST_IF_DEV_MAX; ++i) {
+		struct isst_if_cmd_cb *cb = &punit_callbacks[i];
+
+		if (cb->registered && !try_module_get(cb->owner)) {
+			ret = -ENODEV;
+			break;
+		}
+	}
+	if (ret) {
+		int j;
+
+		for (j = 0; j < i; ++j) {
+			struct isst_if_cmd_cb *cb;
+
+			cb = &punit_callbacks[j];
+			if (cb->registered)
+				module_put(cb->owner);
+		}
+	} else {
+		misc_device_open++;
+	}
+	mutex_unlock(&punit_misc_dev_open_lock);
+
+	return ret;
+}
+
+static int isst_if_relase(struct inode *inode, struct file *f)
+{
+	int i;
+
+	mutex_lock(&punit_misc_dev_open_lock);
+	misc_device_open--;
+	for (i = 0; i < ISST_IF_DEV_MAX; ++i) {
+		struct isst_if_cmd_cb *cb = &punit_callbacks[i];
+
+		if (cb->registered)
+			module_put(cb->owner);
+	}
+	mutex_unlock(&punit_misc_dev_open_lock);
+
+	return 0;
+}
+
+static const struct file_operations isst_if_char_driver_ops = {
+	.open = isst_if_open,
+	.unlocked_ioctl = isst_if_def_ioctl,
+	.release = isst_if_relase,
+};
+
+static struct miscdevice isst_if_char_driver = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "isst_interface",
+	.fops		= &isst_if_char_driver_ops,
+};
+
+static int isst_misc_reg(void)
+{
+	mutex_lock(&punit_misc_dev_reg_lock);
+	if (misc_device_ret)
+		goto unlock_exit;
+
+	if (!misc_usage_count) {
+		misc_device_ret = isst_if_cpu_info_init();
+		if (misc_device_ret)
+			goto unlock_exit;
+
+		misc_device_ret = misc_register(&isst_if_char_driver);
+		if (misc_device_ret) {
+			isst_if_cpu_info_exit();
+			goto unlock_exit;
+		}
+	}
+	misc_usage_count++;
+
+unlock_exit:
+	mutex_unlock(&punit_misc_dev_reg_lock);
+
+	return misc_device_ret;
+}
+
+static void isst_misc_unreg(void)
+{
+	mutex_lock(&punit_misc_dev_reg_lock);
+	if (misc_usage_count)
+		misc_usage_count--;
+	if (!misc_usage_count && !misc_device_ret) {
+		misc_deregister(&isst_if_char_driver);
+		isst_if_cpu_info_exit();
+	}
+	mutex_unlock(&punit_misc_dev_reg_lock);
+}
+
+/**
+ * isst_if_cdev_register() - Register callback for IOCTL
+ * @device_type: The device type this callback handling.
+ * @cb:	Callback structure.
+ *
+ * This function registers a callback to device type. On very first call
+ * it will register a misc device, which is used for user kernel interface.
+ * Other calls simply increment ref count. Registry will fail, if the user
+ * already opened misc device for operation. Also if the misc device
+ * creation failed, then it will not try again and all callers will get
+ * failure code.
+ *
+ * Return: Return the return value from the misc creation device or -EINVAL
+ * for unsupported device type.
+ */
+int isst_if_cdev_register(int device_type, struct isst_if_cmd_cb *cb)
+{
+	int ret;
+
+	if (device_type >= ISST_IF_DEV_MAX)
+		return -EINVAL;
+
+	mutex_lock(&punit_misc_dev_open_lock);
+	/* Device is already open, we don't want to add new callbacks */
+	if (misc_device_open) {
+		mutex_unlock(&punit_misc_dev_open_lock);
+		return -EAGAIN;
+	}
+	memcpy(&punit_callbacks[device_type], cb, sizeof(*cb));
+	punit_callbacks[device_type].registered = 1;
+	mutex_unlock(&punit_misc_dev_open_lock);
+
+	ret = isst_misc_reg();
+	if (ret) {
+		/*
+		 * No need of mutex as the misc device register failed
+		 * as no one can open device yet. Hence no contention.
+		 */
+		punit_callbacks[device_type].registered = 0;
+		return ret;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(isst_if_cdev_register);
+
+/**
+ * isst_if_cdev_unregister() - Unregister callback for IOCTL
+ * @device_type: The device type to unregister.
+ *
+ * This function unregisters the previously registered callback. If this
+ * is the last callback unregistering, then misc device is removed.
+ *
+ * Return: None.
+ */
+void isst_if_cdev_unregister(int device_type)
+{
+	isst_misc_unreg();
+	mutex_lock(&punit_misc_dev_open_lock);
+	punit_callbacks[device_type].registered = 0;
+	if (device_type == ISST_IF_DEV_MBOX)
+		isst_delete_hash();
+	mutex_unlock(&punit_misc_dev_open_lock);
+}
+EXPORT_SYMBOL_GPL(isst_if_cdev_unregister);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.h b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h
new file mode 100644
index 000000000..fdecdae24
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Intel Speed Select Interface: Drivers Internal defines
+ * Copyright (c) 2019, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+
+#ifndef __ISST_IF_COMMON_H
+#define __ISST_IF_COMMON_H
+
+#define PCI_DEVICE_ID_INTEL_RAPL_PRIO_DEVID_0	0x3451
+#define PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_0	0x3459
+
+#define PCI_DEVICE_ID_INTEL_RAPL_PRIO_DEVID_1	0x3251
+#define PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_1	0x3259
+
+/*
+ * Validate maximum commands in a single request.
+ * This is enough to handle command to every core in one ioctl, or all
+ * possible message id to one CPU. Limit is also helpful for resonse time
+ * per IOCTL request, as PUNIT may take different times to process each
+ * request and may hold for long for too many commands.
+ */
+#define ISST_IF_CMD_LIMIT	64
+
+#define ISST_IF_API_VERSION	0x01
+#define ISST_IF_DRIVER_VERSION	0x01
+
+#define ISST_IF_DEV_MBOX	0
+#define ISST_IF_DEV_MMIO	1
+#define ISST_IF_DEV_MAX		2
+
+/**
+ * struct isst_if_cmd_cb - Used to register a IOCTL handler
+ * @registered:	Used by the common code to store registry. Caller don't
+ *		to touch this field
+ * @cmd_size:	The command size of the individual command in IOCTL
+ * @offset:	Offset to the first valid member in command structure.
+ *		This will be the offset of the start of the command
+ *		after command count field
+ * @cmd_callback: Callback function to handle IOCTL. The callback has the
+ *		command pointer with data for command. There is a pointer
+ *		called write_only, which when set, will not copy the
+ *		response to user ioctl buffer. The "resume" argument
+ *		can be used to avoid storing the command for replay
+ *		during system resume
+ *
+ * This structure is used to register an handler for IOCTL. To avoid
+ * code duplication common code handles all the IOCTL command read/write
+ * including handling multiple command in single IOCTL. The caller just
+ * need to execute a command via the registered callback.
+ */
+struct isst_if_cmd_cb {
+	int registered;
+	int cmd_size;
+	int offset;
+	struct module *owner;
+	long (*cmd_callback)(u8 *ptr, int *write_only, int resume);
+};
+
+/* Internal interface functions */
+int isst_if_cdev_register(int type, struct isst_if_cmd_cb *cb);
+void isst_if_cdev_unregister(int type);
+struct pci_dev *isst_if_get_pci_dev(int cpu, int bus, int dev, int fn);
+bool isst_if_mbox_cmd_set_req(struct isst_if_mbox_cmd *mbox_cmd);
+bool isst_if_mbox_cmd_invalid(struct isst_if_mbox_cmd *cmd);
+int isst_store_cmd(int cmd, int sub_command, u32 cpu, int mbox_cmd,
+		   u32 param, u64 data);
+void isst_resume_common(void);
+#endif
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c
new file mode 100644
index 000000000..1b6eab071
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select Interface: Mbox via MSR Interface
+ * Copyright (c) 2019, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/cpuhotplug.h>
+#include <linux/pci.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/topology.h>
+#include <linux/uaccess.h>
+#include <uapi/linux/isst_if.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+#include "isst_if_common.h"
+
+#define MSR_OS_MAILBOX_INTERFACE	0xB0
+#define MSR_OS_MAILBOX_DATA		0xB1
+#define MSR_OS_MAILBOX_BUSY_BIT		31
+
+/*
+ * Based on experiments count is never more than 1, as the MSR overhead
+ * is enough to finish the command. So here this is the worst case number.
+ */
+#define OS_MAILBOX_RETRY_COUNT		3
+
+static int isst_if_send_mbox_cmd(u8 command, u8 sub_command, u32 parameter,
+				 u32 command_data, u32 *response_data)
+{
+	u32 retries;
+	u64 data;
+	int ret;
+
+	/* Poll for rb bit == 0 */
+	retries = OS_MAILBOX_RETRY_COUNT;
+	do {
+		rdmsrl(MSR_OS_MAILBOX_INTERFACE, data);
+		if (data & BIT_ULL(MSR_OS_MAILBOX_BUSY_BIT)) {
+			ret = -EBUSY;
+			continue;
+		}
+		ret = 0;
+		break;
+	} while (--retries);
+
+	if (ret)
+		return ret;
+
+	/* Write DATA register */
+	wrmsrl(MSR_OS_MAILBOX_DATA, command_data);
+
+	/* Write command register */
+	data = BIT_ULL(MSR_OS_MAILBOX_BUSY_BIT) |
+		      (parameter & GENMASK_ULL(13, 0)) << 16 |
+		      (sub_command << 8) |
+		      command;
+	wrmsrl(MSR_OS_MAILBOX_INTERFACE, data);
+
+	/* Poll for rb bit == 0 */
+	retries = OS_MAILBOX_RETRY_COUNT;
+	do {
+		rdmsrl(MSR_OS_MAILBOX_INTERFACE, data);
+		if (data & BIT_ULL(MSR_OS_MAILBOX_BUSY_BIT)) {
+			ret = -EBUSY;
+			continue;
+		}
+
+		if (data & 0xff)
+			return -ENXIO;
+
+		if (response_data) {
+			rdmsrl(MSR_OS_MAILBOX_DATA, data);
+			*response_data = data;
+		}
+		ret = 0;
+		break;
+	} while (--retries);
+
+	return ret;
+}
+
+struct msrl_action {
+	int err;
+	struct isst_if_mbox_cmd *mbox_cmd;
+};
+
+/* revisit, smp_call_function_single should be enough for atomic mailbox! */
+static void msrl_update_func(void *info)
+{
+	struct msrl_action *act = info;
+
+	act->err = isst_if_send_mbox_cmd(act->mbox_cmd->command,
+					 act->mbox_cmd->sub_command,
+					 act->mbox_cmd->parameter,
+					 act->mbox_cmd->req_data,
+					 &act->mbox_cmd->resp_data);
+}
+
+static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume)
+{
+	struct msrl_action action;
+	int ret;
+
+	action.mbox_cmd = (struct isst_if_mbox_cmd *)cmd_ptr;
+
+	if (isst_if_mbox_cmd_invalid(action.mbox_cmd))
+		return -EINVAL;
+
+	if (isst_if_mbox_cmd_set_req(action.mbox_cmd) &&
+	    !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	/*
+	 * To complete mailbox command, we need to access two MSRs.
+	 * So we don't want race to complete a mailbox transcation.
+	 * Here smp_call ensures that msrl_update_func() has no race
+	 * and also with wait flag, wait for completion.
+	 * smp_call_function_single is using get_cpu() and put_cpu().
+	 */
+	ret = smp_call_function_single(action.mbox_cmd->logical_cpu,
+				       msrl_update_func, &action, 1);
+	if (ret)
+		return ret;
+
+	if (!action.err && !resume && isst_if_mbox_cmd_set_req(action.mbox_cmd))
+		action.err = isst_store_cmd(action.mbox_cmd->command,
+					    action.mbox_cmd->sub_command,
+					    action.mbox_cmd->logical_cpu, 1,
+					    action.mbox_cmd->parameter,
+					    action.mbox_cmd->req_data);
+	*write_only = 0;
+
+	return action.err;
+}
+
+
+static int isst_pm_notify(struct notifier_block *nb,
+			       unsigned long mode, void *_unused)
+{
+	switch (mode) {
+	case PM_POST_HIBERNATION:
+	case PM_POST_RESTORE:
+	case PM_POST_SUSPEND:
+		isst_resume_common();
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block isst_pm_nb = {
+	.notifier_call = isst_pm_notify,
+};
+
+static const struct x86_cpu_id isst_if_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, NULL),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, isst_if_cpu_ids);
+
+static int __init isst_if_mbox_init(void)
+{
+	struct isst_if_cmd_cb cb;
+	const struct x86_cpu_id *id;
+	u64 data;
+	int ret;
+
+	id = x86_match_cpu(isst_if_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	/* Check presence of mailbox MSRs */
+	ret = rdmsrl_safe(MSR_OS_MAILBOX_INTERFACE, &data);
+	if (ret)
+		return ret;
+
+	ret = rdmsrl_safe(MSR_OS_MAILBOX_DATA, &data);
+	if (ret)
+		return ret;
+
+	memset(&cb, 0, sizeof(cb));
+	cb.cmd_size = sizeof(struct isst_if_mbox_cmd);
+	cb.offset = offsetof(struct isst_if_mbox_cmds, mbox_cmd);
+	cb.cmd_callback = isst_if_mbox_proc_cmd;
+	cb.owner = THIS_MODULE;
+	ret = isst_if_cdev_register(ISST_IF_DEV_MBOX, &cb);
+	if (ret)
+		return ret;
+
+	ret = register_pm_notifier(&isst_pm_nb);
+	if (ret)
+		isst_if_cdev_unregister(ISST_IF_DEV_MBOX);
+
+	return ret;
+}
+module_init(isst_if_mbox_init)
+
+static void __exit isst_if_mbox_exit(void)
+{
+	unregister_pm_notifier(&isst_pm_nb);
+	isst_if_cdev_unregister(ISST_IF_DEV_MBOX);
+}
+module_exit(isst_if_mbox_exit)
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel speed select interface mailbox driver");
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c
new file mode 100644
index 000000000..df1fc6c71
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select Interface: Mbox via PCI Interface
+ * Copyright (c) 2019, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+
+#include <linux/cpufeature.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched/signal.h>
+#include <linux/uaccess.h>
+#include <uapi/linux/isst_if.h>
+
+#include "isst_if_common.h"
+
+#define PUNIT_MAILBOX_DATA		0xA0
+#define PUNIT_MAILBOX_INTERFACE		0xA4
+#define PUNIT_MAILBOX_BUSY_BIT		31
+
+/*
+ * The average time to complete mailbox commands is less than 40us. Most of
+ * the commands complete in few micro seconds. But the same firmware handles
+ * requests from all power management features.
+ * We can create a scenario where we flood the firmware with requests then
+ * the mailbox response can be delayed for 100s of micro seconds. So define
+ * two timeouts. One for average case and one for long.
+ * If the firmware is taking more than average, just call cond_resched().
+ */
+#define OS_MAILBOX_TIMEOUT_AVG_US	40
+#define OS_MAILBOX_TIMEOUT_MAX_US	1000
+
+struct isst_if_device {
+	struct mutex mutex;
+};
+
+static int isst_if_mbox_cmd(struct pci_dev *pdev,
+			    struct isst_if_mbox_cmd *mbox_cmd)
+{
+	s64 tm_delta = 0;
+	ktime_t tm;
+	u32 data;
+	int ret;
+
+	/* Poll for rb bit == 0 */
+	tm = ktime_get();
+	do {
+		ret = pci_read_config_dword(pdev, PUNIT_MAILBOX_INTERFACE,
+					    &data);
+		if (ret)
+			return ret;
+
+		if (data & BIT_ULL(PUNIT_MAILBOX_BUSY_BIT)) {
+			ret = -EBUSY;
+			tm_delta = ktime_us_delta(ktime_get(), tm);
+			if (tm_delta > OS_MAILBOX_TIMEOUT_AVG_US)
+				cond_resched();
+			continue;
+		}
+		ret = 0;
+		break;
+	} while (tm_delta < OS_MAILBOX_TIMEOUT_MAX_US);
+
+	if (ret)
+		return ret;
+
+	/* Write DATA register */
+	ret = pci_write_config_dword(pdev, PUNIT_MAILBOX_DATA,
+				     mbox_cmd->req_data);
+	if (ret)
+		return ret;
+
+	/* Write command register */
+	data = BIT_ULL(PUNIT_MAILBOX_BUSY_BIT) |
+		      (mbox_cmd->parameter & GENMASK_ULL(13, 0)) << 16 |
+		      (mbox_cmd->sub_command << 8) |
+		      mbox_cmd->command;
+
+	ret = pci_write_config_dword(pdev, PUNIT_MAILBOX_INTERFACE, data);
+	if (ret)
+		return ret;
+
+	/* Poll for rb bit == 0 */
+	tm_delta = 0;
+	tm = ktime_get();
+	do {
+		ret = pci_read_config_dword(pdev, PUNIT_MAILBOX_INTERFACE,
+					    &data);
+		if (ret)
+			return ret;
+
+		if (data & BIT_ULL(PUNIT_MAILBOX_BUSY_BIT)) {
+			ret = -EBUSY;
+			tm_delta = ktime_us_delta(ktime_get(), tm);
+			if (tm_delta > OS_MAILBOX_TIMEOUT_AVG_US)
+				cond_resched();
+			continue;
+		}
+
+		if (data & 0xff)
+			return -ENXIO;
+
+		ret = pci_read_config_dword(pdev, PUNIT_MAILBOX_DATA, &data);
+		if (ret)
+			return ret;
+
+		mbox_cmd->resp_data = data;
+		ret = 0;
+		break;
+	} while (tm_delta < OS_MAILBOX_TIMEOUT_MAX_US);
+
+	return ret;
+}
+
+static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume)
+{
+	struct isst_if_mbox_cmd *mbox_cmd;
+	struct isst_if_device *punit_dev;
+	struct pci_dev *pdev;
+	int ret;
+
+	mbox_cmd = (struct isst_if_mbox_cmd *)cmd_ptr;
+
+	if (isst_if_mbox_cmd_invalid(mbox_cmd))
+		return -EINVAL;
+
+	if (isst_if_mbox_cmd_set_req(mbox_cmd) && !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	pdev = isst_if_get_pci_dev(mbox_cmd->logical_cpu, 1, 30, 1);
+	if (!pdev)
+		return -EINVAL;
+
+	punit_dev = pci_get_drvdata(pdev);
+	if (!punit_dev)
+		return -EINVAL;
+
+	/*
+	 * Basically we are allowing one complete mailbox transaction on
+	 * a mapped PCI device at a time.
+	 */
+	mutex_lock(&punit_dev->mutex);
+	ret = isst_if_mbox_cmd(pdev, mbox_cmd);
+	if (!ret && !resume && isst_if_mbox_cmd_set_req(mbox_cmd))
+		ret = isst_store_cmd(mbox_cmd->command,
+				     mbox_cmd->sub_command,
+				     mbox_cmd->logical_cpu, 1,
+				     mbox_cmd->parameter,
+				     mbox_cmd->req_data);
+	mutex_unlock(&punit_dev->mutex);
+	if (ret)
+		return ret;
+
+	*write_only = 0;
+
+	return 0;
+}
+
+static const struct pci_device_id isst_if_mbox_ids[] = {
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_0)},
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_1)},
+	{ 0 },
+};
+MODULE_DEVICE_TABLE(pci, isst_if_mbox_ids);
+
+static int isst_if_mbox_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *ent)
+{
+	struct isst_if_device *punit_dev;
+	struct isst_if_cmd_cb cb;
+	int ret;
+
+	punit_dev = devm_kzalloc(&pdev->dev, sizeof(*punit_dev), GFP_KERNEL);
+	if (!punit_dev)
+		return -ENOMEM;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	mutex_init(&punit_dev->mutex);
+	pci_set_drvdata(pdev, punit_dev);
+
+	memset(&cb, 0, sizeof(cb));
+	cb.cmd_size = sizeof(struct isst_if_mbox_cmd);
+	cb.offset = offsetof(struct isst_if_mbox_cmds, mbox_cmd);
+	cb.cmd_callback = isst_if_mbox_proc_cmd;
+	cb.owner = THIS_MODULE;
+	ret = isst_if_cdev_register(ISST_IF_DEV_MBOX, &cb);
+
+	if (ret)
+		mutex_destroy(&punit_dev->mutex);
+
+	return ret;
+}
+
+static void isst_if_mbox_remove(struct pci_dev *pdev)
+{
+	struct isst_if_device *punit_dev;
+
+	punit_dev = pci_get_drvdata(pdev);
+	isst_if_cdev_unregister(ISST_IF_DEV_MBOX);
+	mutex_destroy(&punit_dev->mutex);
+}
+
+static int __maybe_unused isst_if_resume(struct device *device)
+{
+	isst_resume_common();
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(isst_if_pm_ops, NULL, isst_if_resume);
+
+static struct pci_driver isst_if_pci_driver = {
+	.name			= "isst_if_mbox_pci",
+	.id_table		= isst_if_mbox_ids,
+	.probe			= isst_if_mbox_probe,
+	.remove			= isst_if_mbox_remove,
+	.driver.pm		= &isst_if_pm_ops,
+};
+
+module_pci_driver(isst_if_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel speed select interface pci mailbox driver");
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c
new file mode 100644
index 000000000..ff49025ec
--- /dev/null
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select Interface: MMIO Interface
+ * Copyright (c) 2019, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched/signal.h>
+#include <linux/uaccess.h>
+#include <uapi/linux/isst_if.h>
+
+#include "isst_if_common.h"
+
+struct isst_mmio_range {
+	int beg;
+	int end;
+};
+
+static struct isst_mmio_range mmio_range_devid_0[] = {
+	{0x04, 0x14},
+	{0x20, 0xD0},
+};
+
+static struct isst_mmio_range mmio_range_devid_1[] = {
+	{0x04, 0x14},
+	{0x20, 0x11C},
+};
+
+struct isst_if_device {
+	void __iomem *punit_mmio;
+	u32 range_0[5];
+	u32 range_1[64];
+	struct isst_mmio_range *mmio_range;
+	struct mutex mutex;
+};
+
+static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
+{
+	struct isst_if_device *punit_dev;
+	struct isst_if_io_reg *io_reg;
+	struct pci_dev *pdev;
+
+	io_reg = (struct isst_if_io_reg *)cmd_ptr;
+
+	if (io_reg->reg % 4)
+		return -EINVAL;
+
+	if (io_reg->read_write && !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	pdev = isst_if_get_pci_dev(io_reg->logical_cpu, 0, 0, 1);
+	if (!pdev)
+		return -EINVAL;
+
+	punit_dev = pci_get_drvdata(pdev);
+	if (!punit_dev)
+		return -EINVAL;
+
+	if (io_reg->reg < punit_dev->mmio_range[0].beg ||
+	    io_reg->reg > punit_dev->mmio_range[1].end)
+		return -EINVAL;
+
+	/*
+	 * Ensure that operation is complete on a PCI device to avoid read
+	 * write race by using per PCI device mutex.
+	 */
+	mutex_lock(&punit_dev->mutex);
+	if (io_reg->read_write) {
+		writel(io_reg->value, punit_dev->punit_mmio+io_reg->reg);
+		*write_only = 1;
+	} else {
+		io_reg->value = readl(punit_dev->punit_mmio+io_reg->reg);
+		*write_only = 0;
+	}
+	mutex_unlock(&punit_dev->mutex);
+
+	return 0;
+}
+
+static const struct pci_device_id isst_if_ids[] = {
+	{ PCI_DEVICE_DATA(INTEL, RAPL_PRIO_DEVID_0, &mmio_range_devid_0)},
+	{ PCI_DEVICE_DATA(INTEL, RAPL_PRIO_DEVID_1, &mmio_range_devid_1)},
+	{ 0 },
+};
+MODULE_DEVICE_TABLE(pci, isst_if_ids);
+
+static int isst_if_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct isst_if_device *punit_dev;
+	struct isst_if_cmd_cb cb;
+	u32 mmio_base, pcu_base;
+	u64 base_addr;
+	int ret;
+
+	punit_dev = devm_kzalloc(&pdev->dev, sizeof(*punit_dev), GFP_KERNEL);
+	if (!punit_dev)
+		return -ENOMEM;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pci_read_config_dword(pdev, 0xD0, &mmio_base);
+	if (ret)
+		return ret;
+
+	ret = pci_read_config_dword(pdev, 0xFC, &pcu_base);
+	if (ret)
+		return ret;
+
+	pcu_base &= GENMASK(10, 0);
+	base_addr = (u64)mmio_base << 23 | (u64) pcu_base << 12;
+	punit_dev->punit_mmio = devm_ioremap(&pdev->dev, base_addr, 256);
+	if (!punit_dev->punit_mmio)
+		return -ENOMEM;
+
+	mutex_init(&punit_dev->mutex);
+	pci_set_drvdata(pdev, punit_dev);
+	punit_dev->mmio_range = (struct isst_mmio_range *) ent->driver_data;
+
+	memset(&cb, 0, sizeof(cb));
+	cb.cmd_size = sizeof(struct isst_if_io_reg);
+	cb.offset = offsetof(struct isst_if_io_regs, io_reg);
+	cb.cmd_callback = isst_if_mmio_rd_wr;
+	cb.owner = THIS_MODULE;
+	ret = isst_if_cdev_register(ISST_IF_DEV_MMIO, &cb);
+	if (ret)
+		mutex_destroy(&punit_dev->mutex);
+
+	return ret;
+}
+
+static void isst_if_remove(struct pci_dev *pdev)
+{
+	struct isst_if_device *punit_dev;
+
+	punit_dev = pci_get_drvdata(pdev);
+	isst_if_cdev_unregister(ISST_IF_DEV_MMIO);
+	mutex_destroy(&punit_dev->mutex);
+}
+
+static int __maybe_unused isst_if_suspend(struct device *device)
+{
+	struct isst_if_device *punit_dev = dev_get_drvdata(device);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(punit_dev->range_0); ++i)
+		punit_dev->range_0[i] = readl(punit_dev->punit_mmio +
+						punit_dev->mmio_range[0].beg + 4 * i);
+	for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i) {
+		u32 addr;
+
+		addr = punit_dev->mmio_range[1].beg + 4 * i;
+		if (addr > punit_dev->mmio_range[1].end)
+			break;
+		punit_dev->range_1[i] = readl(punit_dev->punit_mmio + addr);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused isst_if_resume(struct device *device)
+{
+	struct isst_if_device *punit_dev = dev_get_drvdata(device);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(punit_dev->range_0); ++i)
+		writel(punit_dev->range_0[i], punit_dev->punit_mmio +
+						punit_dev->mmio_range[0].beg + 4 * i);
+	for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i) {
+		u32 addr;
+
+		addr = punit_dev->mmio_range[1].beg + 4 * i;
+		if (addr > punit_dev->mmio_range[1].end)
+			break;
+
+		writel(punit_dev->range_1[i], punit_dev->punit_mmio + addr);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(isst_if_pm_ops, isst_if_suspend, isst_if_resume);
+
+static struct pci_driver isst_if_pci_driver = {
+	.name			= "isst_if_pci",
+	.id_table		= isst_if_ids,
+	.probe			= isst_if_probe,
+	.remove			= isst_if_remove,
+	.driver.pm		= &isst_if_pm_ops,
+};
+
+module_pci_driver(isst_if_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel speed select interface mmio driver");
diff --git a/drivers/platform/x86/intel/telemetry/Kconfig b/drivers/platform/x86/intel/telemetry/Kconfig
new file mode 100644
index 000000000..da887bd03
--- /dev/null
+++ b/drivers/platform/x86/intel/telemetry/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+config INTEL_TELEMETRY
+	tristate "Intel SoC Telemetry driver"
+	depends on X86_64
+	depends on MFD_INTEL_PMC_BXT
+	depends on INTEL_PUNIT_IPC
+	help
+	  This driver provides interfaces to configure and use
+	  telemetry for Intel SoC from Apollo Lake onwards.
+	  It is also used to get various SoC events and parameters
+	  directly via debugfs files. Various tools may use
+	  this interface for SoC state monitoring.
diff --git a/drivers/platform/x86/intel/telemetry/Makefile b/drivers/platform/x86/intel/telemetry/Makefile
new file mode 100644
index 000000000..bfdba5b6c
--- /dev/null
+++ b/drivers/platform/x86/intel/telemetry/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+intel_telemetry_core-y			:= core.o
+obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o
+intel_telemetry_pltdrv-y		:= pltdrv.o
+obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_pltdrv.o
+intel_telemetry_debugfs-y		:= debugfs.o
+obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_debugfs.o
diff --git a/drivers/platform/x86/intel/telemetry/core.c b/drivers/platform/x86/intel/telemetry/core.c
new file mode 100644
index 000000000..e4be40f73
--- /dev/null
+++ b/drivers/platform/x86/intel/telemetry/core.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel SoC Core Telemetry Driver
+ * Copyright (C) 2015, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Telemetry Framework provides platform related PM and performance statistics.
+ * This file provides the core telemetry API implementation.
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+
+#include <asm/intel_telemetry.h>
+
+#define DRIVER_NAME "intel_telemetry_core"
+
+struct telemetry_core_config {
+	struct telemetry_plt_config *plt_config;
+	const struct telemetry_core_ops *telem_ops;
+};
+
+static struct telemetry_core_config telm_core_conf;
+
+static int telemetry_def_update_events(struct telemetry_evtconfig pss_evtconfig,
+				      struct telemetry_evtconfig ioss_evtconfig)
+{
+	return 0;
+}
+
+static int telemetry_def_set_sampling_period(u8 pss_period, u8 ioss_period)
+{
+	return 0;
+}
+
+static int telemetry_def_get_sampling_period(u8 *pss_min_period,
+					     u8 *pss_max_period,
+					     u8 *ioss_min_period,
+					     u8 *ioss_max_period)
+{
+	return 0;
+}
+
+static int telemetry_def_get_eventconfig(
+			struct telemetry_evtconfig *pss_evtconfig,
+			struct telemetry_evtconfig *ioss_evtconfig,
+			int pss_len, int ioss_len)
+{
+	return 0;
+}
+
+static int telemetry_def_get_trace_verbosity(enum telemetry_unit telem_unit,
+					     u32 *verbosity)
+{
+	return 0;
+}
+
+
+static int telemetry_def_set_trace_verbosity(enum telemetry_unit telem_unit,
+					     u32 verbosity)
+{
+	return 0;
+}
+
+static int telemetry_def_raw_read_eventlog(enum telemetry_unit telem_unit,
+					   struct telemetry_evtlog *evtlog,
+					   int len, int log_all_evts)
+{
+	return 0;
+}
+
+static int telemetry_def_read_eventlog(enum telemetry_unit telem_unit,
+				       struct telemetry_evtlog *evtlog,
+				       int len, int log_all_evts)
+{
+	return 0;
+}
+
+static int telemetry_def_add_events(u8 num_pss_evts, u8 num_ioss_evts,
+				    u32 *pss_evtmap, u32 *ioss_evtmap)
+{
+	return 0;
+}
+
+static int telemetry_def_reset_events(void)
+{
+	return 0;
+}
+
+static const struct telemetry_core_ops telm_defpltops = {
+	.set_sampling_period = telemetry_def_set_sampling_period,
+	.get_sampling_period = telemetry_def_get_sampling_period,
+	.get_trace_verbosity = telemetry_def_get_trace_verbosity,
+	.set_trace_verbosity = telemetry_def_set_trace_verbosity,
+	.raw_read_eventlog = telemetry_def_raw_read_eventlog,
+	.get_eventconfig = telemetry_def_get_eventconfig,
+	.read_eventlog = telemetry_def_read_eventlog,
+	.update_events = telemetry_def_update_events,
+	.reset_events = telemetry_def_reset_events,
+	.add_events = telemetry_def_add_events,
+};
+
+/**
+ * telemetry_update_events() - Update telemetry Configuration
+ * @pss_evtconfig: PSS related config. No change if num_evts = 0.
+ * @ioss_evtconfig: IOSS related config. No change if num_evts = 0.
+ *
+ * This API updates the IOSS & PSS Telemetry configuration. Old config
+ * is overwritten. Call telemetry_reset_events when logging is over
+ * All sample period values should be in the form of:
+ * bits[6:3] -> value; bits [0:2]-> Exponent; Period = (Value *16^Exponent)
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_update_events(struct telemetry_evtconfig pss_evtconfig,
+			    struct telemetry_evtconfig ioss_evtconfig)
+{
+	return telm_core_conf.telem_ops->update_events(pss_evtconfig,
+						       ioss_evtconfig);
+}
+EXPORT_SYMBOL_GPL(telemetry_update_events);
+
+
+/**
+ * telemetry_set_sampling_period() - Sets the IOSS & PSS sampling period
+ * @pss_period:  placeholder for PSS Period to be set.
+ *		 Set to 0 if not required to be updated
+ * @ioss_period: placeholder for IOSS Period to be set
+ *		 Set to 0 if not required to be updated
+ *
+ * All values should be in the form of:
+ * bits[6:3] -> value; bits [0:2]-> Exponent; Period = (Value *16^Exponent)
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_set_sampling_period(u8 pss_period, u8 ioss_period)
+{
+	return telm_core_conf.telem_ops->set_sampling_period(pss_period,
+							     ioss_period);
+}
+EXPORT_SYMBOL_GPL(telemetry_set_sampling_period);
+
+/**
+ * telemetry_get_sampling_period() - Get IOSS & PSS min & max sampling period
+ * @pss_min_period:  placeholder for PSS Min Period supported
+ * @pss_max_period:  placeholder for PSS Max Period supported
+ * @ioss_min_period: placeholder for IOSS Min Period supported
+ * @ioss_max_period: placeholder for IOSS Max Period supported
+ *
+ * All values should be in the form of:
+ * bits[6:3] -> value; bits [0:2]-> Exponent; Period = (Value *16^Exponent)
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_get_sampling_period(u8 *pss_min_period, u8 *pss_max_period,
+				  u8 *ioss_min_period, u8 *ioss_max_period)
+{
+	return telm_core_conf.telem_ops->get_sampling_period(pss_min_period,
+							     pss_max_period,
+							     ioss_min_period,
+							     ioss_max_period);
+}
+EXPORT_SYMBOL_GPL(telemetry_get_sampling_period);
+
+
+/**
+ * telemetry_reset_events() - Restore the IOSS & PSS configuration to default
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_reset_events(void)
+{
+	return telm_core_conf.telem_ops->reset_events();
+}
+EXPORT_SYMBOL_GPL(telemetry_reset_events);
+
+/**
+ * telemetry_get_eventconfig() - Returns the pss and ioss events enabled
+ * @pss_evtconfig: Pointer to PSS related configuration.
+ * @ioss_evtconfig: Pointer to IOSS related configuration.
+ * @pss_len:	   Number of u32 elements allocated for pss_evtconfig array
+ * @ioss_len:	   Number of u32 elements allocated for ioss_evtconfig array
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_get_eventconfig(struct telemetry_evtconfig *pss_evtconfig,
+			      struct telemetry_evtconfig *ioss_evtconfig,
+			      int pss_len, int ioss_len)
+{
+	return telm_core_conf.telem_ops->get_eventconfig(pss_evtconfig,
+							 ioss_evtconfig,
+							 pss_len, ioss_len);
+}
+EXPORT_SYMBOL_GPL(telemetry_get_eventconfig);
+
+/**
+ * telemetry_add_events() - Add IOSS & PSS configuration to existing settings.
+ * @num_pss_evts:  Number of PSS Events (<29) in pss_evtmap. Can be 0.
+ * @num_ioss_evts: Number of IOSS Events (<29) in ioss_evtmap. Can be 0.
+ * @pss_evtmap:    Array of PSS Event-IDs to Enable
+ * @ioss_evtmap:   Array of PSS Event-IDs to Enable
+ *
+ * Events are appended to Old Configuration. In case of total events > 28, it
+ * returns error. Call telemetry_reset_events to reset after eventlog done
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_add_events(u8 num_pss_evts, u8 num_ioss_evts,
+			 u32 *pss_evtmap, u32 *ioss_evtmap)
+{
+	return telm_core_conf.telem_ops->add_events(num_pss_evts,
+						    num_ioss_evts, pss_evtmap,
+						    ioss_evtmap);
+}
+EXPORT_SYMBOL_GPL(telemetry_add_events);
+
+/**
+ * telemetry_read_events() - Fetches samples as specified by evtlog.telem_evt_id
+ * @telem_unit: Specify whether IOSS or PSS Read
+ * @evtlog:     Array of telemetry_evtlog structs to fill data
+ *		evtlog.telem_evt_id specifies the ids to read
+ * @len:	Length of array of evtlog
+ *
+ * Return: number of eventlogs read for success, < 0 for failure
+ */
+int telemetry_read_events(enum telemetry_unit telem_unit,
+			  struct telemetry_evtlog *evtlog, int len)
+{
+	return telm_core_conf.telem_ops->read_eventlog(telem_unit, evtlog,
+						       len, 0);
+}
+EXPORT_SYMBOL_GPL(telemetry_read_events);
+
+/**
+ * telemetry_raw_read_events() - Fetch samples specified by evtlog.telem_evt_id
+ * @telem_unit: Specify whether IOSS or PSS Read
+ * @evtlog:	Array of telemetry_evtlog structs to fill data
+ *		evtlog.telem_evt_id specifies the ids to read
+ * @len:	Length of array of evtlog
+ *
+ * The caller must take care of locking in this case.
+ *
+ * Return: number of eventlogs read for success, < 0 for failure
+ */
+int telemetry_raw_read_events(enum telemetry_unit telem_unit,
+			      struct telemetry_evtlog *evtlog, int len)
+{
+	return telm_core_conf.telem_ops->raw_read_eventlog(telem_unit, evtlog,
+							   len, 0);
+}
+EXPORT_SYMBOL_GPL(telemetry_raw_read_events);
+
+/**
+ * telemetry_read_eventlog() - Fetch the Telemetry log from PSS or IOSS
+ * @telem_unit: Specify whether IOSS or PSS Read
+ * @evtlog:	Array of telemetry_evtlog structs to fill data
+ * @len:	Length of array of evtlog
+ *
+ * Return: number of eventlogs read for success, < 0 for failure
+ */
+int telemetry_read_eventlog(enum telemetry_unit telem_unit,
+			    struct telemetry_evtlog *evtlog, int len)
+{
+	return telm_core_conf.telem_ops->read_eventlog(telem_unit, evtlog,
+						       len, 1);
+}
+EXPORT_SYMBOL_GPL(telemetry_read_eventlog);
+
+/**
+ * telemetry_raw_read_eventlog() - Fetch the Telemetry log from PSS or IOSS
+ * @telem_unit: Specify whether IOSS or PSS Read
+ * @evtlog:	Array of telemetry_evtlog structs to fill data
+ * @len:	Length of array of evtlog
+ *
+ * The caller must take care of locking in this case.
+ *
+ * Return: number of eventlogs read for success, < 0 for failure
+ */
+int telemetry_raw_read_eventlog(enum telemetry_unit telem_unit,
+				struct telemetry_evtlog *evtlog, int len)
+{
+	return telm_core_conf.telem_ops->raw_read_eventlog(telem_unit, evtlog,
+							   len, 1);
+}
+EXPORT_SYMBOL_GPL(telemetry_raw_read_eventlog);
+
+
+/**
+ * telemetry_get_trace_verbosity() - Get the IOSS & PSS Trace verbosity
+ * @telem_unit: Specify whether IOSS or PSS Read
+ * @verbosity:	Pointer to return Verbosity
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_get_trace_verbosity(enum telemetry_unit telem_unit,
+				  u32 *verbosity)
+{
+	return telm_core_conf.telem_ops->get_trace_verbosity(telem_unit,
+							     verbosity);
+}
+EXPORT_SYMBOL_GPL(telemetry_get_trace_verbosity);
+
+
+/**
+ * telemetry_set_trace_verbosity() - Update the IOSS & PSS Trace verbosity
+ * @telem_unit: Specify whether IOSS or PSS Read
+ * @verbosity:	Verbosity to set
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_set_trace_verbosity(enum telemetry_unit telem_unit, u32 verbosity)
+{
+	return telm_core_conf.telem_ops->set_trace_verbosity(telem_unit,
+							     verbosity);
+}
+EXPORT_SYMBOL_GPL(telemetry_set_trace_verbosity);
+
+/**
+ * telemetry_set_pltdata() - Set the platform specific Data
+ * @ops:	Pointer to ops structure
+ * @pltconfig:	Platform config data
+ *
+ * Usage by other than telemetry pltdrv module is invalid
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_set_pltdata(const struct telemetry_core_ops *ops,
+			  struct telemetry_plt_config *pltconfig)
+{
+	if (ops)
+		telm_core_conf.telem_ops = ops;
+
+	if (pltconfig)
+		telm_core_conf.plt_config = pltconfig;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(telemetry_set_pltdata);
+
+/**
+ * telemetry_clear_pltdata() - Clear the platform specific Data
+ *
+ * Usage by other than telemetry pltdrv module is invalid
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_clear_pltdata(void)
+{
+	telm_core_conf.telem_ops = &telm_defpltops;
+	telm_core_conf.plt_config = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(telemetry_clear_pltdata);
+
+/**
+ * telemetry_get_pltdata() - Return telemetry platform config
+ *
+ * May be used by other telemetry modules to get platform specific
+ * configuration.
+ */
+struct telemetry_plt_config *telemetry_get_pltdata(void)
+{
+	return telm_core_conf.plt_config;
+}
+EXPORT_SYMBOL_GPL(telemetry_get_pltdata);
+
+static inline int telemetry_get_pssevtname(enum telemetry_unit telem_unit,
+					   const char **name, int len)
+{
+	struct telemetry_unit_config psscfg;
+	int i;
+
+	if (!telm_core_conf.plt_config)
+		return -EINVAL;
+
+	psscfg = telm_core_conf.plt_config->pss_config;
+
+	if (len > psscfg.ssram_evts_used)
+		len = psscfg.ssram_evts_used;
+
+	for (i = 0; i < len; i++)
+		name[i] = psscfg.telem_evts[i].name;
+
+	return 0;
+}
+
+static inline int telemetry_get_iossevtname(enum telemetry_unit telem_unit,
+					    const char **name, int len)
+{
+	struct telemetry_unit_config iosscfg;
+	int i;
+
+	if (!(telm_core_conf.plt_config))
+		return -EINVAL;
+
+	iosscfg = telm_core_conf.plt_config->ioss_config;
+
+	if (len > iosscfg.ssram_evts_used)
+		len = iosscfg.ssram_evts_used;
+
+	for (i = 0; i < len; i++)
+		name[i] = iosscfg.telem_evts[i].name;
+
+	return 0;
+
+}
+
+/**
+ * telemetry_get_evtname() - Checkif platform config is valid
+ * @telem_unit:	Telemetry Unit to check
+ * @name:	Array of character pointers to contain name
+ * @len:	length of array name provided by user
+ *
+ * Usage by other than telemetry debugfs module is invalid
+ *
+ * Return: 0 success, < 0 for failure
+ */
+int telemetry_get_evtname(enum telemetry_unit telem_unit,
+			  const char **name, int len)
+{
+	int ret = -EINVAL;
+
+	if (telem_unit == TELEM_PSS)
+		ret = telemetry_get_pssevtname(telem_unit, name, len);
+
+	else if (telem_unit == TELEM_IOSS)
+		ret = telemetry_get_iossevtname(telem_unit, name, len);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(telemetry_get_evtname);
+
+static int __init telemetry_module_init(void)
+{
+	pr_info(pr_fmt(DRIVER_NAME) " Init\n");
+
+	telm_core_conf.telem_ops = &telm_defpltops;
+	return 0;
+}
+
+static void __exit telemetry_module_exit(void)
+{
+}
+
+module_init(telemetry_module_init);
+module_exit(telemetry_module_exit);
+
+MODULE_AUTHOR("Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>");
+MODULE_DESCRIPTION("Intel SoC Telemetry Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/telemetry/debugfs.c b/drivers/platform/x86/intel/telemetry/debugfs.c
new file mode 100644
index 000000000..1d4d0fbfd
--- /dev/null
+++ b/drivers/platform/x86/intel/telemetry/debugfs.c
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel SOC Telemetry debugfs Driver: Currently supports APL
+ * Copyright (c) 2015, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This file provides the debugfs interfaces for telemetry.
+ * /sys/kernel/debug/telemetry/pss_info: Shows Primary Control Sub-Sys Counters
+ * /sys/kernel/debug/telemetry/ioss_info: Shows IO Sub-System Counters
+ * /sys/kernel/debug/telemetry/soc_states: Shows SoC State
+ * /sys/kernel/debug/telemetry/pss_trace_verbosity: Read and Change Tracing
+ *				Verbosity via firmware
+ * /sys/kernel/debug/telemetry/ioss_race_verbosity: Write and Change Tracing
+ *				Verbosity via firmware
+ */
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/mfd/intel_pmc_bxt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/suspend.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/intel_telemetry.h>
+
+#define DRIVER_NAME			"telemetry_soc_debugfs"
+#define DRIVER_VERSION			"1.0.0"
+
+/* ApolloLake SoC Event-IDs */
+#define TELEM_APL_PSS_PSTATES_ID	0x2802
+#define TELEM_APL_PSS_IDLE_ID		0x2806
+#define TELEM_APL_PCS_IDLE_BLOCKED_ID	0x2C00
+#define TELEM_APL_PCS_S0IX_BLOCKED_ID	0x2C01
+#define TELEM_APL_PSS_WAKEUP_ID		0x2C02
+#define TELEM_APL_PSS_LTR_BLOCKING_ID	0x2C03
+
+#define TELEM_APL_S0IX_TOTAL_OCC_ID	0x4000
+#define TELEM_APL_S0IX_SHLW_OCC_ID	0x4001
+#define TELEM_APL_S0IX_DEEP_OCC_ID	0x4002
+#define TELEM_APL_S0IX_TOTAL_RES_ID	0x4800
+#define TELEM_APL_S0IX_SHLW_RES_ID	0x4801
+#define TELEM_APL_S0IX_DEEP_RES_ID	0x4802
+#define TELEM_APL_D0IX_ID		0x581A
+#define TELEM_APL_D3_ID			0x5819
+#define TELEM_APL_PG_ID			0x5818
+
+#define TELEM_INFO_SRAMEVTS_MASK	0xFF00
+#define TELEM_INFO_SRAMEVTS_SHIFT	0x8
+#define TELEM_SSRAM_READ_TIMEOUT	10
+
+#define TELEM_MASK_BIT			1
+#define TELEM_MASK_BYTE			0xFF
+#define BYTES_PER_LONG			8
+#define TELEM_APL_MASK_PCS_STATE	0xF
+
+/* Max events in bitmap to check for */
+#define TELEM_PSS_IDLE_EVTS		25
+#define TELEM_PSS_IDLE_BLOCKED_EVTS	20
+#define TELEM_PSS_S0IX_BLOCKED_EVTS	20
+#define TELEM_PSS_S0IX_WAKEUP_EVTS	20
+#define TELEM_PSS_LTR_BLOCKING_EVTS	20
+#define TELEM_IOSS_DX_D0IX_EVTS		25
+#define TELEM_IOSS_PG_EVTS		30
+
+#define TELEM_CHECK_AND_PARSE_EVTS(EVTID, EVTNUM, BUF, EVTLOG, EVTDAT, MASK) { \
+	if (evtlog[index].telem_evtid == (EVTID)) { \
+		for (idx = 0; idx < (EVTNUM); idx++) \
+			(BUF)[idx] = ((EVTLOG) >> (EVTDAT)[idx].bit_pos) & \
+				     (MASK); \
+	continue; \
+	} \
+}
+
+#define TELEM_CHECK_AND_PARSE_CTRS(EVTID, CTR) { \
+	if (evtlog[index].telem_evtid == (EVTID)) { \
+		(CTR) = evtlog[index].telem_evtlog; \
+		continue; \
+	} \
+}
+
+static u8 suspend_prep_ok;
+static u32 suspend_shlw_ctr_temp, suspend_deep_ctr_temp;
+static u64 suspend_shlw_res_temp, suspend_deep_res_temp;
+
+struct telemetry_susp_stats {
+	u32 shlw_ctr;
+	u32 deep_ctr;
+	u64 shlw_res;
+	u64 deep_res;
+};
+
+/* Bitmap definitions for default counters in APL */
+struct telem_pss_idle_stateinfo {
+	const char *name;
+	u32 bit_pos;
+};
+
+static struct telem_pss_idle_stateinfo telem_apl_pss_idle_data[] = {
+	{"IA_CORE0_C1E",		0},
+	{"IA_CORE1_C1E",		1},
+	{"IA_CORE2_C1E",		2},
+	{"IA_CORE3_C1E",		3},
+	{"IA_CORE0_C6",			16},
+	{"IA_CORE1_C6",			17},
+	{"IA_CORE2_C6",			18},
+	{"IA_CORE3_C6",			19},
+	{"IA_MODULE0_C7",		32},
+	{"IA_MODULE1_C7",		33},
+	{"GT_RC6",			40},
+	{"IUNIT_PROCESSING_IDLE",	41},
+	{"FAR_MEM_IDLE",		43},
+	{"DISPLAY_IDLE",		44},
+	{"IUNIT_INPUT_SYSTEM_IDLE",	45},
+	{"PCS_STATUS",			60},
+};
+
+struct telem_pcs_blkd_info {
+	const char *name;
+	u32 bit_pos;
+};
+
+static struct telem_pcs_blkd_info telem_apl_pcs_idle_blkd_data[] = {
+	{"COMPUTE",			0},
+	{"MISC",			8},
+	{"MODULE_ACTIONS_PENDING",	16},
+	{"LTR",				24},
+	{"DISPLAY_WAKE",		32},
+	{"ISP_WAKE",			40},
+	{"PSF0_ACTIVE",			48},
+};
+
+static struct telem_pcs_blkd_info telem_apl_pcs_s0ix_blkd_data[] = {
+	{"LTR",				0},
+	{"IRTL",			8},
+	{"WAKE_DEADLINE_PENDING",	16},
+	{"DISPLAY",			24},
+	{"ISP",				32},
+	{"CORE",			40},
+	{"PMC",				48},
+	{"MISC",			56},
+};
+
+struct telem_pss_ltr_info {
+	const char *name;
+	u32 bit_pos;
+};
+
+static struct telem_pss_ltr_info telem_apl_pss_ltr_data[] = {
+	{"CORE_ACTIVE",		0},
+	{"MEM_UP",		8},
+	{"DFX",			16},
+	{"DFX_FORCE_LTR",	24},
+	{"DISPLAY",		32},
+	{"ISP",			40},
+	{"SOUTH",		48},
+};
+
+struct telem_pss_wakeup_info {
+	const char *name;
+	u32 bit_pos;
+};
+
+static struct telem_pss_wakeup_info telem_apl_pss_wakeup[] = {
+	{"IP_IDLE",			0},
+	{"DISPLAY_WAKE",		8},
+	{"VOLTAGE_REG_INT",		16},
+	{"DROWSY_TIMER (HOTPLUG)",	24},
+	{"CORE_WAKE",			32},
+	{"MISC_S0IX",			40},
+	{"MISC_ABORT",			56},
+};
+
+struct telem_ioss_d0ix_stateinfo {
+	const char *name;
+	u32 bit_pos;
+};
+
+static struct telem_ioss_d0ix_stateinfo telem_apl_ioss_d0ix_data[] = {
+	{"CSE",		0},
+	{"SCC2",	1},
+	{"GMM",		2},
+	{"XDCI",	3},
+	{"XHCI",	4},
+	{"ISH",		5},
+	{"AVS",		6},
+	{"PCIE0P1",	7},
+	{"PECI0P0",	8},
+	{"LPSS",	9},
+	{"SCC",		10},
+	{"PWM",		11},
+	{"PCIE1_P3",    12},
+	{"PCIE1_P2",    13},
+	{"PCIE1_P1",    14},
+	{"PCIE1_P0",    15},
+	{"CNV",		16},
+	{"SATA",	17},
+	{"PRTC",	18},
+};
+
+struct telem_ioss_pg_info {
+	const char *name;
+	u32 bit_pos;
+};
+
+static struct telem_ioss_pg_info telem_apl_ioss_pg_data[] = {
+	{"LPSS",	0},
+	{"SCC",		1},
+	{"P2SB",	2},
+	{"SCC2",	3},
+	{"GMM",		4},
+	{"PCIE0",	5},
+	{"XDCI",	6},
+	{"xHCI",	7},
+	{"CSE",		8},
+	{"SPI",		9},
+	{"AVSPGD4",	10},
+	{"AVSPGD3",	11},
+	{"AVSPGD2",	12},
+	{"AVSPGD1",	13},
+	{"ISH",		14},
+	{"EXI",		15},
+	{"NPKVRC",	16},
+	{"NPKVNN",	17},
+	{"CUNIT",	18},
+	{"FUSE_CTRL",	19},
+	{"PCIE1",	20},
+	{"CNV",		21},
+	{"LPC",		22},
+	{"SATA",	23},
+	{"SMB",		24},
+	{"PRTC",	25},
+};
+
+struct telemetry_debugfs_conf {
+	struct telemetry_susp_stats suspend_stats;
+	struct dentry *telemetry_dbg_dir;
+
+	/* Bitmap Data */
+	struct telem_ioss_d0ix_stateinfo *ioss_d0ix_data;
+	struct telem_pss_idle_stateinfo *pss_idle_data;
+	struct telem_pcs_blkd_info *pcs_idle_blkd_data;
+	struct telem_pcs_blkd_info *pcs_s0ix_blkd_data;
+	struct telem_pss_wakeup_info *pss_wakeup;
+	struct telem_pss_ltr_info *pss_ltr_data;
+	struct telem_ioss_pg_info *ioss_pg_data;
+	u8 pcs_idle_blkd_evts;
+	u8 pcs_s0ix_blkd_evts;
+	u8 pss_wakeup_evts;
+	u8 pss_idle_evts;
+	u8 pss_ltr_evts;
+	u8 ioss_d0ix_evts;
+	u8 ioss_pg_evts;
+
+	/* IDs */
+	u16  pss_ltr_blocking_id;
+	u16  pcs_idle_blkd_id;
+	u16  pcs_s0ix_blkd_id;
+	u16  s0ix_total_occ_id;
+	u16  s0ix_shlw_occ_id;
+	u16  s0ix_deep_occ_id;
+	u16  s0ix_total_res_id;
+	u16  s0ix_shlw_res_id;
+	u16  s0ix_deep_res_id;
+	u16  pss_wakeup_id;
+	u16  ioss_d0ix_id;
+	u16  pstates_id;
+	u16  pss_idle_id;
+	u16  ioss_d3_id;
+	u16  ioss_pg_id;
+};
+
+static struct telemetry_debugfs_conf *debugfs_conf;
+
+static struct telemetry_debugfs_conf telem_apl_debugfs_conf = {
+	.pss_idle_data = telem_apl_pss_idle_data,
+	.pcs_idle_blkd_data = telem_apl_pcs_idle_blkd_data,
+	.pcs_s0ix_blkd_data = telem_apl_pcs_s0ix_blkd_data,
+	.pss_ltr_data = telem_apl_pss_ltr_data,
+	.pss_wakeup = telem_apl_pss_wakeup,
+	.ioss_d0ix_data = telem_apl_ioss_d0ix_data,
+	.ioss_pg_data = telem_apl_ioss_pg_data,
+
+	.pss_idle_evts = ARRAY_SIZE(telem_apl_pss_idle_data),
+	.pcs_idle_blkd_evts = ARRAY_SIZE(telem_apl_pcs_idle_blkd_data),
+	.pcs_s0ix_blkd_evts = ARRAY_SIZE(telem_apl_pcs_s0ix_blkd_data),
+	.pss_ltr_evts = ARRAY_SIZE(telem_apl_pss_ltr_data),
+	.pss_wakeup_evts = ARRAY_SIZE(telem_apl_pss_wakeup),
+	.ioss_d0ix_evts = ARRAY_SIZE(telem_apl_ioss_d0ix_data),
+	.ioss_pg_evts = ARRAY_SIZE(telem_apl_ioss_pg_data),
+
+	.pstates_id = TELEM_APL_PSS_PSTATES_ID,
+	.pss_idle_id = TELEM_APL_PSS_IDLE_ID,
+	.pcs_idle_blkd_id = TELEM_APL_PCS_IDLE_BLOCKED_ID,
+	.pcs_s0ix_blkd_id = TELEM_APL_PCS_S0IX_BLOCKED_ID,
+	.pss_wakeup_id = TELEM_APL_PSS_WAKEUP_ID,
+	.pss_ltr_blocking_id = TELEM_APL_PSS_LTR_BLOCKING_ID,
+	.s0ix_total_occ_id = TELEM_APL_S0IX_TOTAL_OCC_ID,
+	.s0ix_shlw_occ_id = TELEM_APL_S0IX_SHLW_OCC_ID,
+	.s0ix_deep_occ_id = TELEM_APL_S0IX_DEEP_OCC_ID,
+	.s0ix_total_res_id = TELEM_APL_S0IX_TOTAL_RES_ID,
+	.s0ix_shlw_res_id = TELEM_APL_S0IX_SHLW_RES_ID,
+	.s0ix_deep_res_id = TELEM_APL_S0IX_DEEP_RES_ID,
+	.ioss_d0ix_id = TELEM_APL_D0IX_ID,
+	.ioss_d3_id = TELEM_APL_D3_ID,
+	.ioss_pg_id = TELEM_APL_PG_ID,
+};
+
+static const struct x86_cpu_id telemetry_debugfs_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	&telem_apl_debugfs_conf),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS,	&telem_apl_debugfs_conf),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, telemetry_debugfs_cpu_ids);
+
+static int telemetry_debugfs_check_evts(void)
+{
+	if ((debugfs_conf->pss_idle_evts > TELEM_PSS_IDLE_EVTS) ||
+	    (debugfs_conf->pcs_idle_blkd_evts > TELEM_PSS_IDLE_BLOCKED_EVTS) ||
+	    (debugfs_conf->pcs_s0ix_blkd_evts > TELEM_PSS_S0IX_BLOCKED_EVTS) ||
+	    (debugfs_conf->pss_ltr_evts > TELEM_PSS_LTR_BLOCKING_EVTS) ||
+	    (debugfs_conf->pss_wakeup_evts > TELEM_PSS_S0IX_WAKEUP_EVTS) ||
+	    (debugfs_conf->ioss_d0ix_evts > TELEM_IOSS_DX_D0IX_EVTS) ||
+	    (debugfs_conf->ioss_pg_evts > TELEM_IOSS_PG_EVTS))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int telem_pss_states_show(struct seq_file *s, void *unused)
+{
+	struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	struct telemetry_debugfs_conf *conf = debugfs_conf;
+	const char *name[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	u32 pcs_idle_blkd[TELEM_PSS_IDLE_BLOCKED_EVTS],
+	    pcs_s0ix_blkd[TELEM_PSS_S0IX_BLOCKED_EVTS],
+	    pss_s0ix_wakeup[TELEM_PSS_S0IX_WAKEUP_EVTS],
+	    pss_ltr_blkd[TELEM_PSS_LTR_BLOCKING_EVTS],
+	    pss_idle[TELEM_PSS_IDLE_EVTS];
+	int index, idx, ret, err = 0;
+	u64 pstates = 0;
+
+	ret = telemetry_read_eventlog(TELEM_PSS, evtlog,
+				      TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (ret < 0)
+		return ret;
+
+	err = telemetry_get_evtname(TELEM_PSS, name,
+				    TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (err < 0)
+		return err;
+
+	seq_puts(s, "\n----------------------------------------------------\n");
+	seq_puts(s, "\tPSS TELEM EVENTLOG (Residency = field/19.2 us\n");
+	seq_puts(s, "----------------------------------------------------\n");
+	for (index = 0; index < ret; index++) {
+		seq_printf(s, "%-32s %llu\n",
+			   name[index], evtlog[index].telem_evtlog);
+
+		/* Fetch PSS IDLE State */
+		if (evtlog[index].telem_evtid == conf->pss_idle_id) {
+			pss_idle[conf->pss_idle_evts - 1] =
+			(evtlog[index].telem_evtlog >>
+			conf->pss_idle_data[conf->pss_idle_evts - 1].bit_pos) &
+			TELEM_APL_MASK_PCS_STATE;
+		}
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->pss_idle_id,
+					   conf->pss_idle_evts - 1,
+					   pss_idle, evtlog[index].telem_evtlog,
+					   conf->pss_idle_data, TELEM_MASK_BIT);
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->pcs_idle_blkd_id,
+					   conf->pcs_idle_blkd_evts,
+					   pcs_idle_blkd,
+					   evtlog[index].telem_evtlog,
+					   conf->pcs_idle_blkd_data,
+					   TELEM_MASK_BYTE);
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->pcs_s0ix_blkd_id,
+					   conf->pcs_s0ix_blkd_evts,
+					   pcs_s0ix_blkd,
+					   evtlog[index].telem_evtlog,
+					   conf->pcs_s0ix_blkd_data,
+					   TELEM_MASK_BYTE);
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->pss_wakeup_id,
+					   conf->pss_wakeup_evts,
+					   pss_s0ix_wakeup,
+					   evtlog[index].telem_evtlog,
+					   conf->pss_wakeup, TELEM_MASK_BYTE);
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->pss_ltr_blocking_id,
+					   conf->pss_ltr_evts, pss_ltr_blkd,
+					   evtlog[index].telem_evtlog,
+					   conf->pss_ltr_data, TELEM_MASK_BYTE);
+
+		if (evtlog[index].telem_evtid == debugfs_conf->pstates_id)
+			pstates = evtlog[index].telem_evtlog;
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "PStates\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Domain\t\t\t\tFreq(Mhz)\n");
+	seq_printf(s, " IA\t\t\t\t %llu\n GT\t\t\t\t %llu\n",
+		   (pstates & TELEM_MASK_BYTE)*100,
+		   ((pstates >> 8) & TELEM_MASK_BYTE)*50/3);
+
+	seq_printf(s, " IUNIT\t\t\t\t %llu\n SA\t\t\t\t %llu\n",
+		   ((pstates >> 16) & TELEM_MASK_BYTE)*25,
+		   ((pstates >> 24) & TELEM_MASK_BYTE)*50/3);
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "PSS IDLE Status\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Device\t\t\t\t\tIDLE\n");
+	for (index = 0; index < debugfs_conf->pss_idle_evts; index++) {
+		seq_printf(s, "%-32s\t%u\n",
+			   debugfs_conf->pss_idle_data[index].name,
+			   pss_idle[index]);
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "PSS Idle blkd Status (~1ms saturating bucket)\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Blocker\t\t\t\t\tCount\n");
+	for (index = 0; index < debugfs_conf->pcs_idle_blkd_evts; index++) {
+		seq_printf(s, "%-32s\t%u\n",
+			   debugfs_conf->pcs_idle_blkd_data[index].name,
+			   pcs_idle_blkd[index]);
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "PSS S0ix blkd Status (~1ms saturating bucket)\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Blocker\t\t\t\t\tCount\n");
+	for (index = 0; index < debugfs_conf->pcs_s0ix_blkd_evts; index++) {
+		seq_printf(s, "%-32s\t%u\n",
+			   debugfs_conf->pcs_s0ix_blkd_data[index].name,
+			   pcs_s0ix_blkd[index]);
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "LTR Blocking Status (~1ms saturating bucket)\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Blocker\t\t\t\t\tCount\n");
+	for (index = 0; index < debugfs_conf->pss_ltr_evts; index++) {
+		seq_printf(s, "%-32s\t%u\n",
+			   debugfs_conf->pss_ltr_data[index].name,
+			   pss_s0ix_wakeup[index]);
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "Wakes Status (~1ms saturating bucket)\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Wakes\t\t\t\t\tCount\n");
+	for (index = 0; index < debugfs_conf->pss_wakeup_evts; index++) {
+		seq_printf(s, "%-32s\t%u\n",
+			   debugfs_conf->pss_wakeup[index].name,
+			   pss_ltr_blkd[index]);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(telem_pss_states);
+
+static int telem_ioss_states_show(struct seq_file *s, void *unused)
+{
+	struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	const char *name[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	int index, ret, err;
+
+	ret = telemetry_read_eventlog(TELEM_IOSS, evtlog,
+				      TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (ret < 0)
+		return ret;
+
+	err = telemetry_get_evtname(TELEM_IOSS, name,
+				    TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (err < 0)
+		return err;
+
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "\tI0SS TELEMETRY EVENTLOG\n");
+	seq_puts(s, "--------------------------------------\n");
+	for (index = 0; index < ret; index++) {
+		seq_printf(s, "%-32s 0x%llx\n",
+			   name[index], evtlog[index].telem_evtlog);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(telem_ioss_states);
+
+static int telem_soc_states_show(struct seq_file *s, void *unused)
+{
+	u32 d3_sts[TELEM_IOSS_DX_D0IX_EVTS], d0ix_sts[TELEM_IOSS_DX_D0IX_EVTS];
+	u32 pg_sts[TELEM_IOSS_PG_EVTS], pss_idle[TELEM_PSS_IDLE_EVTS];
+	struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	u32 s0ix_total_ctr = 0, s0ix_shlw_ctr = 0, s0ix_deep_ctr = 0;
+	u64 s0ix_total_res = 0, s0ix_shlw_res = 0, s0ix_deep_res = 0;
+	struct telemetry_debugfs_conf *conf = debugfs_conf;
+	struct pci_dev *dev = NULL;
+	int index, idx, ret;
+	u32 d3_state;
+	u16 pmcsr;
+
+	ret = telemetry_read_eventlog(TELEM_IOSS, evtlog,
+				      TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (ret < 0)
+		return ret;
+
+	for (index = 0; index < ret; index++) {
+		TELEM_CHECK_AND_PARSE_EVTS(conf->ioss_d3_id,
+					   conf->ioss_d0ix_evts,
+					   d3_sts, evtlog[index].telem_evtlog,
+					   conf->ioss_d0ix_data,
+					   TELEM_MASK_BIT);
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->ioss_pg_id, conf->ioss_pg_evts,
+					   pg_sts, evtlog[index].telem_evtlog,
+					   conf->ioss_pg_data, TELEM_MASK_BIT);
+
+		TELEM_CHECK_AND_PARSE_EVTS(conf->ioss_d0ix_id,
+					   conf->ioss_d0ix_evts,
+					   d0ix_sts, evtlog[index].telem_evtlog,
+					   conf->ioss_d0ix_data,
+					   TELEM_MASK_BIT);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_total_occ_id,
+					   s0ix_total_ctr);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_occ_id,
+					   s0ix_shlw_ctr);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_occ_id,
+					   s0ix_deep_ctr);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_total_res_id,
+					   s0ix_total_res);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_res_id,
+					   s0ix_shlw_res);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_res_id,
+					   s0ix_deep_res);
+	}
+
+	seq_puts(s, "\n---------------------------------------------------\n");
+	seq_puts(s, "S0IX Type\t\t\t Occurrence\t\t Residency(us)\n");
+	seq_puts(s, "---------------------------------------------------\n");
+
+	seq_printf(s, "S0IX Shallow\t\t\t %10u\t %10llu\n",
+		   s0ix_shlw_ctr -
+		   conf->suspend_stats.shlw_ctr,
+		   (u64)((s0ix_shlw_res -
+		   conf->suspend_stats.shlw_res)*10/192));
+
+	seq_printf(s, "S0IX Deep\t\t\t %10u\t %10llu\n",
+		   s0ix_deep_ctr -
+		   conf->suspend_stats.deep_ctr,
+		   (u64)((s0ix_deep_res -
+		   conf->suspend_stats.deep_res)*10/192));
+
+	seq_printf(s, "Suspend(With S0ixShallow)\t %10u\t %10llu\n",
+		   conf->suspend_stats.shlw_ctr,
+		   (u64)(conf->suspend_stats.shlw_res*10)/192);
+
+	seq_printf(s, "Suspend(With S0ixDeep)\t\t %10u\t %10llu\n",
+		   conf->suspend_stats.deep_ctr,
+		   (u64)(conf->suspend_stats.deep_res*10)/192);
+
+	seq_printf(s, "TOTAL S0IX\t\t\t %10u\t %10llu\n", s0ix_total_ctr,
+		   (u64)(s0ix_total_res*10/192));
+	seq_puts(s, "\n-------------------------------------------------\n");
+	seq_puts(s, "\t\tDEVICE STATES\n");
+	seq_puts(s, "-------------------------------------------------\n");
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+		d3_state = ((pmcsr & PCI_PM_CTRL_STATE_MASK) ==
+			    (__force int)PCI_D3hot) ? 1 : 0;
+
+		seq_printf(s, "pci %04x %04X %s %20.20s: ",
+			   dev->vendor, dev->device, dev_name(&dev->dev),
+			   dev_driver_string(&dev->dev));
+		seq_printf(s, " d3:%x\n", d3_state);
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "D3/D0i3 Status\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Block\t\t D3\t D0i3\n");
+	for (index = 0; index < conf->ioss_d0ix_evts; index++) {
+		seq_printf(s, "%-10s\t %u\t %u\n",
+			   conf->ioss_d0ix_data[index].name,
+			   d3_sts[index], d0ix_sts[index]);
+	}
+
+	seq_puts(s, "\n--------------------------------------\n");
+	seq_puts(s, "South Complex PowerGate Status\n");
+	seq_puts(s, "--------------------------------------\n");
+	seq_puts(s, "Device\t\t PG\n");
+	for (index = 0; index < conf->ioss_pg_evts; index++) {
+		seq_printf(s, "%-10s\t %u\n",
+			   conf->ioss_pg_data[index].name,
+			   pg_sts[index]);
+	}
+
+	evtlog->telem_evtid = conf->pss_idle_id;
+	ret = telemetry_read_events(TELEM_PSS, evtlog, 1);
+	if (ret < 0)
+		return ret;
+
+	seq_puts(s, "\n-----------------------------------------\n");
+	seq_puts(s, "North Idle Status\n");
+	seq_puts(s, "-----------------------------------------\n");
+	for (idx = 0; idx < conf->pss_idle_evts - 1; idx++) {
+		pss_idle[idx] =	(evtlog->telem_evtlog >>
+				conf->pss_idle_data[idx].bit_pos) &
+				TELEM_MASK_BIT;
+	}
+
+	pss_idle[idx] = (evtlog->telem_evtlog >>
+			conf->pss_idle_data[idx].bit_pos) &
+			TELEM_APL_MASK_PCS_STATE;
+
+	for (index = 0; index < conf->pss_idle_evts; index++) {
+		seq_printf(s, "%-30s %u\n",
+			   conf->pss_idle_data[index].name,
+			   pss_idle[index]);
+	}
+
+	seq_puts(s, "\nPCS_STATUS Code\n");
+	seq_puts(s, "0:C0 1:C1 2:C1_DN_WT_DEV 3:C2 4:C2_WT_DE_MEM_UP\n");
+	seq_puts(s, "5:C2_WT_DE_MEM_DOWN 6:C2_UP_WT_DEV 7:C2_DN 8:C2_VOA\n");
+	seq_puts(s, "9:C2_VOA_UP 10:S0IX_PRE 11:S0IX\n");
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(telem_soc_states);
+
+static int telem_s0ix_res_get(void *data, u64 *val)
+{
+	struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
+	u64 s0ix_total_res;
+	int ret;
+
+	ret = intel_pmc_s0ix_counter_read(plt_config->pmc, &s0ix_total_res);
+	if (ret) {
+		pr_err("Failed to read S0ix residency");
+		return ret;
+	}
+
+	*val = s0ix_total_res;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(telem_s0ix_fops, telem_s0ix_res_get, NULL, "%llu\n");
+
+static int telem_pss_trc_verb_show(struct seq_file *s, void *unused)
+{
+	u32 verbosity;
+	int err;
+
+	err = telemetry_get_trace_verbosity(TELEM_PSS, &verbosity);
+	if (err) {
+		pr_err("Get PSS Trace Verbosity Failed with Error %d\n", err);
+		return -EFAULT;
+	}
+
+	seq_printf(s, "PSS Trace Verbosity %u\n", verbosity);
+	return 0;
+}
+
+static ssize_t telem_pss_trc_verb_write(struct file *file,
+					const char __user *userbuf,
+					size_t count, loff_t *ppos)
+{
+	u32 verbosity;
+	int err;
+
+	err = kstrtou32_from_user(userbuf, count, 0, &verbosity);
+	if (err)
+		return err;
+
+	err = telemetry_set_trace_verbosity(TELEM_PSS, verbosity);
+	if (err) {
+		pr_err("Changing PSS Trace Verbosity Failed. Error %d\n", err);
+		return err;
+	}
+
+	return count;
+}
+
+static int telem_pss_trc_verb_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, telem_pss_trc_verb_show, inode->i_private);
+}
+
+static const struct file_operations telem_pss_trc_verb_ops = {
+	.open		= telem_pss_trc_verb_open,
+	.read		= seq_read,
+	.write		= telem_pss_trc_verb_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int telem_ioss_trc_verb_show(struct seq_file *s, void *unused)
+{
+	u32 verbosity;
+	int err;
+
+	err = telemetry_get_trace_verbosity(TELEM_IOSS, &verbosity);
+	if (err) {
+		pr_err("Get IOSS Trace Verbosity Failed with Error %d\n", err);
+		return -EFAULT;
+	}
+
+	seq_printf(s, "IOSS Trace Verbosity %u\n", verbosity);
+	return 0;
+}
+
+static ssize_t telem_ioss_trc_verb_write(struct file *file,
+					 const char __user *userbuf,
+					 size_t count, loff_t *ppos)
+{
+	u32 verbosity;
+	int err;
+
+	err = kstrtou32_from_user(userbuf, count, 0, &verbosity);
+	if (err)
+		return err;
+
+	err = telemetry_set_trace_verbosity(TELEM_IOSS, verbosity);
+	if (err) {
+		pr_err("Changing IOSS Trace Verbosity Failed. Error %d\n", err);
+		return err;
+	}
+
+	return count;
+}
+
+static int telem_ioss_trc_verb_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, telem_ioss_trc_verb_show, inode->i_private);
+}
+
+static const struct file_operations telem_ioss_trc_verb_ops = {
+	.open		= telem_ioss_trc_verb_open,
+	.read		= seq_read,
+	.write		= telem_ioss_trc_verb_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int pm_suspend_prep_cb(void)
+{
+	struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	struct telemetry_debugfs_conf *conf = debugfs_conf;
+	int ret, index;
+
+	ret = telemetry_raw_read_eventlog(TELEM_IOSS, evtlog,
+			TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (ret < 0) {
+		suspend_prep_ok = 0;
+		goto out;
+	}
+
+	for (index = 0; index < ret; index++) {
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_occ_id,
+					   suspend_shlw_ctr_temp);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_occ_id,
+					   suspend_deep_ctr_temp);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_res_id,
+					   suspend_shlw_res_temp);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_res_id,
+					   suspend_deep_res_temp);
+	}
+	suspend_prep_ok = 1;
+out:
+	return NOTIFY_OK;
+}
+
+static int pm_suspend_exit_cb(void)
+{
+	struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS];
+	static u32 suspend_shlw_ctr_exit, suspend_deep_ctr_exit;
+	static u64 suspend_shlw_res_exit, suspend_deep_res_exit;
+	struct telemetry_debugfs_conf *conf = debugfs_conf;
+	int ret, index;
+
+	if (!suspend_prep_ok)
+		goto out;
+
+	ret = telemetry_raw_read_eventlog(TELEM_IOSS, evtlog,
+					  TELEM_MAX_OS_ALLOCATED_EVENTS);
+	if (ret < 0)
+		goto out;
+
+	for (index = 0; index < ret; index++) {
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_occ_id,
+					   suspend_shlw_ctr_exit);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_occ_id,
+					   suspend_deep_ctr_exit);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_res_id,
+					   suspend_shlw_res_exit);
+
+		TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_res_id,
+					   suspend_deep_res_exit);
+	}
+
+	if ((suspend_shlw_ctr_exit < suspend_shlw_ctr_temp) ||
+	    (suspend_deep_ctr_exit < suspend_deep_ctr_temp) ||
+	    (suspend_shlw_res_exit < suspend_shlw_res_temp) ||
+	    (suspend_deep_res_exit < suspend_deep_res_temp)) {
+		pr_err("Wrong s0ix counters detected\n");
+		goto out;
+	}
+
+	/*
+	 * Due to some design limitations in the firmware, sometimes the
+	 * counters do not get updated by the time we reach here. As a
+	 * workaround, we try to see if this was a genuine case of sleep
+	 * failure or not by cross-checking from PMC GCR registers directly.
+	 */
+	if (suspend_shlw_ctr_exit == suspend_shlw_ctr_temp &&
+	    suspend_deep_ctr_exit == suspend_deep_ctr_temp) {
+		struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
+		struct intel_pmc_dev *pmc = plt_config->pmc;
+
+		ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_SHLW_S0IX_REG,
+					  &suspend_shlw_res_exit);
+		if (ret < 0)
+			goto out;
+
+		ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_DEEP_S0IX_REG,
+					  &suspend_deep_res_exit);
+		if (ret < 0)
+			goto out;
+
+		if (suspend_shlw_res_exit > suspend_shlw_res_temp)
+			suspend_shlw_ctr_exit++;
+
+		if (suspend_deep_res_exit > suspend_deep_res_temp)
+			suspend_deep_ctr_exit++;
+	}
+
+	suspend_shlw_ctr_exit -= suspend_shlw_ctr_temp;
+	suspend_deep_ctr_exit -= suspend_deep_ctr_temp;
+	suspend_shlw_res_exit -= suspend_shlw_res_temp;
+	suspend_deep_res_exit -= suspend_deep_res_temp;
+
+	if (suspend_shlw_ctr_exit != 0) {
+		conf->suspend_stats.shlw_ctr +=
+		suspend_shlw_ctr_exit;
+
+		conf->suspend_stats.shlw_res +=
+		suspend_shlw_res_exit;
+	}
+
+	if (suspend_deep_ctr_exit != 0) {
+		conf->suspend_stats.deep_ctr +=
+		suspend_deep_ctr_exit;
+
+		conf->suspend_stats.deep_res +=
+		suspend_deep_res_exit;
+	}
+
+out:
+	suspend_prep_ok = 0;
+	return NOTIFY_OK;
+}
+
+static int pm_notification(struct notifier_block *this,
+			   unsigned long event, void *ptr)
+{
+	switch (event) {
+	case PM_SUSPEND_PREPARE:
+		return pm_suspend_prep_cb();
+	case PM_POST_SUSPEND:
+		return pm_suspend_exit_cb();
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block pm_notifier = {
+	.notifier_call = pm_notification,
+};
+
+static int __init telemetry_debugfs_init(void)
+{
+	const struct x86_cpu_id *id;
+	int err;
+	struct dentry *dir;
+
+	/* Only APL supported for now */
+	id = x86_match_cpu(telemetry_debugfs_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	debugfs_conf = (struct telemetry_debugfs_conf *)id->driver_data;
+
+	if (!telemetry_get_pltdata()) {
+		pr_info("Invalid pltconfig, ensure IPC1 device is enabled in BIOS\n");
+		return -ENODEV;
+	}
+
+	err = telemetry_debugfs_check_evts();
+	if (err < 0) {
+		pr_info("telemetry_debugfs_check_evts failed\n");
+		return -EINVAL;
+	}
+
+	register_pm_notifier(&pm_notifier);
+
+	dir = debugfs_create_dir("telemetry", NULL);
+	debugfs_conf->telemetry_dbg_dir = dir;
+
+	debugfs_create_file("pss_info", S_IFREG | S_IRUGO, dir, NULL,
+			    &telem_pss_states_fops);
+	debugfs_create_file("ioss_info", S_IFREG | S_IRUGO, dir, NULL,
+			    &telem_ioss_states_fops);
+	debugfs_create_file("soc_states", S_IFREG | S_IRUGO, dir, NULL,
+			    &telem_soc_states_fops);
+	debugfs_create_file("s0ix_residency_usec", S_IFREG | S_IRUGO, dir, NULL,
+			    &telem_s0ix_fops);
+	debugfs_create_file("pss_trace_verbosity", S_IFREG | S_IRUGO, dir, NULL,
+			    &telem_pss_trc_verb_ops);
+	debugfs_create_file("ioss_trace_verbosity", S_IFREG | S_IRUGO, dir,
+			    NULL, &telem_ioss_trc_verb_ops);
+	return 0;
+}
+
+static void __exit telemetry_debugfs_exit(void)
+{
+	debugfs_remove_recursive(debugfs_conf->telemetry_dbg_dir);
+	debugfs_conf->telemetry_dbg_dir = NULL;
+	unregister_pm_notifier(&pm_notifier);
+}
+
+late_initcall(telemetry_debugfs_init);
+module_exit(telemetry_debugfs_exit);
+
+MODULE_AUTHOR("Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>");
+MODULE_DESCRIPTION("Intel SoC Telemetry debugfs Interface");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/telemetry/pltdrv.c b/drivers/platform/x86/intel/telemetry/pltdrv.c
new file mode 100644
index 000000000..405dea87d
--- /dev/null
+++ b/drivers/platform/x86/intel/telemetry/pltdrv.c
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel SOC Telemetry Platform Driver: Currently supports APL
+ * Copyright (c) 2015, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This file provides the platform specific telemetry implementation for APL.
+ * It used the PUNIT and PMC IPC interfaces for configuring the counters.
+ * The accumulated results are fetched from SRAM.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/intel_punit_ipc.h>
+#include <asm/intel_telemetry.h>
+
+#define DRIVER_NAME	"intel_telemetry"
+#define DRIVER_VERSION	"1.0.0"
+
+#define TELEM_TRC_VERBOSITY_MASK	0x3
+
+#define TELEM_MIN_PERIOD(x)		((x) & 0x7F0000)
+#define TELEM_MAX_PERIOD(x)		((x) & 0x7F000000)
+#define TELEM_SAMPLE_PERIOD_INVALID(x)	((x) & (BIT(7)))
+#define TELEM_CLEAR_SAMPLE_PERIOD(x)	((x) &= ~0x7F)
+
+#define TELEM_SAMPLING_DEFAULT_PERIOD	0xD
+
+#define TELEM_MAX_EVENTS_SRAM		28
+#define TELEM_SSRAM_STARTTIME_OFFSET	8
+#define TELEM_SSRAM_EVTLOG_OFFSET	16
+
+#define IOSS_TELEM			0xeb
+#define IOSS_TELEM_EVENT_READ		0x0
+#define IOSS_TELEM_EVENT_WRITE		0x1
+#define IOSS_TELEM_INFO_READ		0x2
+#define IOSS_TELEM_TRACE_CTL_READ	0x5
+#define IOSS_TELEM_TRACE_CTL_WRITE	0x6
+#define IOSS_TELEM_EVENT_CTL_READ	0x7
+#define IOSS_TELEM_EVENT_CTL_WRITE	0x8
+#define IOSS_TELEM_EVT_WRITE_SIZE	0x3
+
+#define TELEM_INFO_SRAMEVTS_MASK	0xFF00
+#define TELEM_INFO_SRAMEVTS_SHIFT	0x8
+#define TELEM_SSRAM_READ_TIMEOUT	10
+
+#define TELEM_INFO_NENABLES_MASK	0xFF
+#define TELEM_EVENT_ENABLE		0x8000
+
+#define TELEM_MASK_BIT			1
+#define TELEM_MASK_BYTE			0xFF
+#define BYTES_PER_LONG			8
+#define TELEM_MASK_PCS_STATE		0xF
+
+#define TELEM_DISABLE(x)		((x) &= ~(BIT(31)))
+#define TELEM_CLEAR_EVENTS(x)		((x) |= (BIT(30)))
+#define TELEM_ENABLE_SRAM_EVT_TRACE(x)	((x) &= ~(BIT(30) | BIT(24)))
+#define TELEM_ENABLE_PERIODIC(x)	((x) |= (BIT(23) | BIT(31) | BIT(7)))
+#define TELEM_EXTRACT_VERBOSITY(x, y)	((y) = (((x) >> 27) & 0x3))
+#define TELEM_CLEAR_VERBOSITY_BITS(x)	((x) &= ~(BIT(27) | BIT(28)))
+#define TELEM_SET_VERBOSITY_BITS(x, y)	((x) |= ((y) << 27))
+
+enum telemetry_action {
+	TELEM_UPDATE = 0,
+	TELEM_ADD,
+	TELEM_RESET,
+	TELEM_ACTION_NONE
+};
+
+struct telem_ssram_region {
+	u64 timestamp;
+	u64 start_time;
+	u64 events[TELEM_MAX_EVENTS_SRAM];
+};
+
+static struct telemetry_plt_config *telm_conf;
+
+/*
+ * The following counters are programmed by default during setup.
+ * Only 20 allocated to kernel driver
+ */
+static struct telemetry_evtmap
+	telemetry_apl_ioss_default_events[TELEM_MAX_OS_ALLOCATED_EVENTS] = {
+	{"SOC_S0IX_TOTAL_RES",			0x4800},
+	{"SOC_S0IX_TOTAL_OCC",			0x4000},
+	{"SOC_S0IX_SHALLOW_RES",		0x4801},
+	{"SOC_S0IX_SHALLOW_OCC",		0x4001},
+	{"SOC_S0IX_DEEP_RES",			0x4802},
+	{"SOC_S0IX_DEEP_OCC",			0x4002},
+	{"PMC_POWER_GATE",			0x5818},
+	{"PMC_D3_STATES",			0x5819},
+	{"PMC_D0I3_STATES",			0x581A},
+	{"PMC_S0IX_WAKE_REASON_GPIO",		0x6000},
+	{"PMC_S0IX_WAKE_REASON_TIMER",		0x6001},
+	{"PMC_S0IX_WAKE_REASON_VNNREQ",         0x6002},
+	{"PMC_S0IX_WAKE_REASON_LOWPOWER",       0x6003},
+	{"PMC_S0IX_WAKE_REASON_EXTERNAL",       0x6004},
+	{"PMC_S0IX_WAKE_REASON_MISC",           0x6005},
+	{"PMC_S0IX_BLOCKING_IPS_D3_D0I3",       0x6006},
+	{"PMC_S0IX_BLOCKING_IPS_PG",            0x6007},
+	{"PMC_S0IX_BLOCKING_MISC_IPS_PG",       0x6008},
+	{"PMC_S0IX_BLOCK_IPS_VNN_REQ",          0x6009},
+	{"PMC_S0IX_BLOCK_IPS_CLOCKS",           0x600B},
+};
+
+
+static struct telemetry_evtmap
+	telemetry_apl_pss_default_events[TELEM_MAX_OS_ALLOCATED_EVENTS] = {
+	{"IA_CORE0_C6_RES",			0x0400},
+	{"IA_CORE0_C6_CTR",			0x0000},
+	{"IA_MODULE0_C7_RES",			0x0410},
+	{"IA_MODULE0_C7_CTR",			0x000E},
+	{"IA_C0_RES",				0x0805},
+	{"PCS_LTR",				0x2801},
+	{"PSTATES",				0x2802},
+	{"SOC_S0I3_RES",			0x0409},
+	{"SOC_S0I3_CTR",			0x000A},
+	{"PCS_S0I3_CTR",			0x0009},
+	{"PCS_C1E_RES",				0x041A},
+	{"PCS_IDLE_STATUS",			0x2806},
+	{"IA_PERF_LIMITS",			0x280B},
+	{"GT_PERF_LIMITS",			0x280C},
+	{"PCS_WAKEUP_S0IX_CTR",			0x0030},
+	{"PCS_IDLE_BLOCKED",			0x2C00},
+	{"PCS_S0IX_BLOCKED",			0x2C01},
+	{"PCS_S0IX_WAKE_REASONS",		0x2C02},
+	{"PCS_LTR_BLOCKING",			0x2C03},
+	{"PC2_AND_MEM_SHALLOW_IDLE_RES",	0x1D40},
+};
+
+static struct telemetry_evtmap
+	telemetry_glk_pss_default_events[TELEM_MAX_OS_ALLOCATED_EVENTS] = {
+	{"IA_CORE0_C6_RES",			0x0400},
+	{"IA_CORE0_C6_CTR",			0x0000},
+	{"IA_MODULE0_C7_RES",			0x0410},
+	{"IA_MODULE0_C7_CTR",			0x000C},
+	{"IA_C0_RES",				0x0805},
+	{"PCS_LTR",				0x2801},
+	{"PSTATES",				0x2802},
+	{"SOC_S0I3_RES",			0x0407},
+	{"SOC_S0I3_CTR",			0x0008},
+	{"PCS_S0I3_CTR",			0x0007},
+	{"PCS_C1E_RES",				0x0414},
+	{"PCS_IDLE_STATUS",			0x2806},
+	{"IA_PERF_LIMITS",			0x280B},
+	{"GT_PERF_LIMITS",			0x280C},
+	{"PCS_WAKEUP_S0IX_CTR",			0x0025},
+	{"PCS_IDLE_BLOCKED",			0x2C00},
+	{"PCS_S0IX_BLOCKED",			0x2C01},
+	{"PCS_S0IX_WAKE_REASONS",		0x2C02},
+	{"PCS_LTR_BLOCKING",			0x2C03},
+	{"PC2_AND_MEM_SHALLOW_IDLE_RES",	0x1D40},
+};
+
+/* APL specific Data */
+static struct telemetry_plt_config telem_apl_config = {
+	.pss_config = {
+		.telem_evts = telemetry_apl_pss_default_events,
+	},
+	.ioss_config = {
+		.telem_evts = telemetry_apl_ioss_default_events,
+	},
+};
+
+/* GLK specific Data */
+static struct telemetry_plt_config telem_glk_config = {
+	.pss_config = {
+		.telem_evts = telemetry_glk_pss_default_events,
+	},
+	.ioss_config = {
+		.telem_evts = telemetry_apl_ioss_default_events,
+	},
+};
+
+static const struct x86_cpu_id telemetry_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	&telem_apl_config),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS,	&telem_glk_config),
+	{}
+};
+
+MODULE_DEVICE_TABLE(x86cpu, telemetry_cpu_ids);
+
+static inline int telem_get_unitconfig(enum telemetry_unit telem_unit,
+				     struct telemetry_unit_config **unit_config)
+{
+	if (telem_unit == TELEM_PSS)
+		*unit_config = &(telm_conf->pss_config);
+	else if (telem_unit == TELEM_IOSS)
+		*unit_config = &(telm_conf->ioss_config);
+	else
+		return -EINVAL;
+
+	return 0;
+
+}
+
+static int telemetry_check_evtid(enum telemetry_unit telem_unit,
+				 u32 *evtmap, u8 len,
+				 enum telemetry_action action)
+{
+	struct telemetry_unit_config *unit_config;
+	int ret;
+
+	ret = telem_get_unitconfig(telem_unit, &unit_config);
+	if (ret < 0)
+		return ret;
+
+	switch (action) {
+	case TELEM_RESET:
+		if (len > TELEM_MAX_EVENTS_SRAM)
+			return -EINVAL;
+
+		break;
+
+	case TELEM_UPDATE:
+		if (len > TELEM_MAX_EVENTS_SRAM)
+			return -EINVAL;
+
+		if ((len > 0) && (evtmap == NULL))
+			return -EINVAL;
+
+		break;
+
+	case TELEM_ADD:
+		if ((len + unit_config->ssram_evts_used) >
+		    TELEM_MAX_EVENTS_SRAM)
+			return -EINVAL;
+
+		if ((len > 0) && (evtmap == NULL))
+			return -EINVAL;
+
+		break;
+
+	default:
+		pr_err("Unknown Telemetry action specified %d\n", action);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static inline int telemetry_plt_config_ioss_event(u32 evt_id, int index)
+{
+	u32 write_buf;
+
+	write_buf = evt_id | TELEM_EVENT_ENABLE;
+	write_buf <<= BITS_PER_BYTE;
+	write_buf |= index;
+
+	return intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+					 IOSS_TELEM_EVENT_WRITE, &write_buf,
+					 IOSS_TELEM_EVT_WRITE_SIZE, NULL, 0);
+}
+
+static inline int telemetry_plt_config_pss_event(u32 evt_id, int index)
+{
+	u32 write_buf;
+	int ret;
+
+	write_buf = evt_id | TELEM_EVENT_ENABLE;
+	ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_WRITE_TELE_EVENT,
+				      index, 0, &write_buf, NULL);
+
+	return ret;
+}
+
+static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
+					 enum telemetry_action action)
+{
+	struct intel_scu_ipc_dev *scu = telm_conf->scu;
+	u8 num_ioss_evts, ioss_period;
+	int ret, index, idx;
+	u32 *ioss_evtmap;
+	u32 telem_ctrl;
+
+	num_ioss_evts = evtconfig.num_evts;
+	ioss_period = evtconfig.period;
+	ioss_evtmap = evtconfig.evtmap;
+
+	/* Get telemetry EVENT CTL */
+	ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+				    IOSS_TELEM_EVENT_CTL_READ, NULL, 0,
+				    &telem_ctrl, sizeof(telem_ctrl));
+	if (ret) {
+		pr_err("IOSS TELEM_CTRL Read Failed\n");
+		return ret;
+	}
+
+	/* Disable Telemetry */
+	TELEM_DISABLE(telem_ctrl);
+
+	ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+				    IOSS_TELEM_EVENT_CTL_WRITE, &telem_ctrl,
+				    sizeof(telem_ctrl), NULL, 0);
+	if (ret) {
+		pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
+		return ret;
+	}
+
+
+	/* Reset Everything */
+	if (action == TELEM_RESET) {
+		/* Clear All Events */
+		TELEM_CLEAR_EVENTS(telem_ctrl);
+
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+					    IOSS_TELEM_EVENT_CTL_WRITE,
+					    &telem_ctrl, sizeof(telem_ctrl),
+					    NULL, 0);
+		if (ret) {
+			pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
+			return ret;
+		}
+		telm_conf->ioss_config.ssram_evts_used = 0;
+
+		/* Configure Events */
+		for (idx = 0; idx < num_ioss_evts; idx++) {
+			if (telemetry_plt_config_ioss_event(
+			    telm_conf->ioss_config.telem_evts[idx].evt_id,
+			    idx)) {
+				pr_err("IOSS TELEM_RESET Fail for data: %x\n",
+				telm_conf->ioss_config.telem_evts[idx].evt_id);
+				continue;
+			}
+			telm_conf->ioss_config.ssram_evts_used++;
+		}
+	}
+
+	/* Re-Configure Everything */
+	if (action == TELEM_UPDATE) {
+		/* Clear All Events */
+		TELEM_CLEAR_EVENTS(telem_ctrl);
+
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+					    IOSS_TELEM_EVENT_CTL_WRITE,
+					    &telem_ctrl, sizeof(telem_ctrl),
+					    NULL, 0);
+		if (ret) {
+			pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
+			return ret;
+		}
+		telm_conf->ioss_config.ssram_evts_used = 0;
+
+		/* Configure Events */
+		for (index = 0; index < num_ioss_evts; index++) {
+			telm_conf->ioss_config.telem_evts[index].evt_id =
+			ioss_evtmap[index];
+
+			if (telemetry_plt_config_ioss_event(
+			    telm_conf->ioss_config.telem_evts[index].evt_id,
+			    index)) {
+				pr_err("IOSS TELEM_UPDATE Fail for Evt%x\n",
+					ioss_evtmap[index]);
+				continue;
+			}
+			telm_conf->ioss_config.ssram_evts_used++;
+		}
+	}
+
+	/* Add some Events */
+	if (action == TELEM_ADD) {
+		/* Configure Events */
+		for (index = telm_conf->ioss_config.ssram_evts_used, idx = 0;
+		     idx < num_ioss_evts; index++, idx++) {
+			telm_conf->ioss_config.telem_evts[index].evt_id =
+			ioss_evtmap[idx];
+
+			if (telemetry_plt_config_ioss_event(
+			    telm_conf->ioss_config.telem_evts[index].evt_id,
+			    index)) {
+				pr_err("IOSS TELEM_ADD Fail for Event %x\n",
+					ioss_evtmap[idx]);
+				continue;
+			}
+			telm_conf->ioss_config.ssram_evts_used++;
+		}
+	}
+
+	/* Enable Periodic Telemetry Events and enable SRAM trace */
+	TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl);
+	TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl);
+	TELEM_ENABLE_PERIODIC(telem_ctrl);
+	telem_ctrl |= ioss_period;
+
+	ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+				    IOSS_TELEM_EVENT_CTL_WRITE,
+				    &telem_ctrl, sizeof(telem_ctrl), NULL, 0);
+	if (ret) {
+		pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");
+		return ret;
+	}
+
+	telm_conf->ioss_config.curr_period = ioss_period;
+
+	return 0;
+}
+
+
+static int telemetry_setup_pssevtconfig(struct telemetry_evtconfig evtconfig,
+					enum telemetry_action action)
+{
+	u8 num_pss_evts, pss_period;
+	int ret, index, idx;
+	u32 *pss_evtmap;
+	u32 telem_ctrl;
+
+	num_pss_evts = evtconfig.num_evts;
+	pss_period = evtconfig.period;
+	pss_evtmap = evtconfig.evtmap;
+
+	/* PSS Config */
+	/* Get telemetry EVENT CTL */
+	ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL,
+				      0, 0, NULL, &telem_ctrl);
+	if (ret) {
+		pr_err("PSS TELEM_CTRL Read Failed\n");
+		return ret;
+	}
+
+	/* Disable Telemetry */
+	TELEM_DISABLE(telem_ctrl);
+	ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL,
+				      0, 0, &telem_ctrl, NULL);
+	if (ret) {
+		pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");
+		return ret;
+	}
+
+	/* Reset Everything */
+	if (action == TELEM_RESET) {
+		/* Clear All Events */
+		TELEM_CLEAR_EVENTS(telem_ctrl);
+
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL,
+				0, 0, &telem_ctrl, NULL);
+		if (ret) {
+			pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");
+			return ret;
+		}
+		telm_conf->pss_config.ssram_evts_used = 0;
+		/* Configure Events */
+		for (idx = 0; idx < num_pss_evts; idx++) {
+			if (telemetry_plt_config_pss_event(
+			    telm_conf->pss_config.telem_evts[idx].evt_id,
+			    idx)) {
+				pr_err("PSS TELEM_RESET Fail for Event %x\n",
+				telm_conf->pss_config.telem_evts[idx].evt_id);
+				continue;
+			}
+			telm_conf->pss_config.ssram_evts_used++;
+		}
+	}
+
+	/* Re-Configure Everything */
+	if (action == TELEM_UPDATE) {
+		/* Clear All Events */
+		TELEM_CLEAR_EVENTS(telem_ctrl);
+
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL,
+				0, 0, &telem_ctrl, NULL);
+		if (ret) {
+			pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");
+			return ret;
+		}
+		telm_conf->pss_config.ssram_evts_used = 0;
+
+		/* Configure Events */
+		for (index = 0; index < num_pss_evts; index++) {
+			telm_conf->pss_config.telem_evts[index].evt_id =
+			pss_evtmap[index];
+
+			if (telemetry_plt_config_pss_event(
+			    telm_conf->pss_config.telem_evts[index].evt_id,
+			    index)) {
+				pr_err("PSS TELEM_UPDATE Fail for Event %x\n",
+					pss_evtmap[index]);
+				continue;
+			}
+			telm_conf->pss_config.ssram_evts_used++;
+		}
+	}
+
+	/* Add some Events */
+	if (action == TELEM_ADD) {
+		/* Configure Events */
+		for (index = telm_conf->pss_config.ssram_evts_used, idx = 0;
+		     idx < num_pss_evts; index++, idx++) {
+
+			telm_conf->pss_config.telem_evts[index].evt_id =
+			pss_evtmap[idx];
+
+			if (telemetry_plt_config_pss_event(
+			    telm_conf->pss_config.telem_evts[index].evt_id,
+			    index)) {
+				pr_err("PSS TELEM_ADD Fail for Event %x\n",
+					pss_evtmap[idx]);
+				continue;
+			}
+			telm_conf->pss_config.ssram_evts_used++;
+		}
+	}
+
+	/* Enable Periodic Telemetry Events and enable SRAM trace */
+	TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl);
+	TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl);
+	TELEM_ENABLE_PERIODIC(telem_ctrl);
+	telem_ctrl |= pss_period;
+
+	ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL,
+				      0, 0, &telem_ctrl, NULL);
+	if (ret) {
+		pr_err("PSS TELEM_CTRL Event Enable Write Failed\n");
+		return ret;
+	}
+
+	telm_conf->pss_config.curr_period = pss_period;
+
+	return 0;
+}
+
+static int telemetry_setup_evtconfig(struct telemetry_evtconfig pss_evtconfig,
+				     struct telemetry_evtconfig ioss_evtconfig,
+				     enum telemetry_action action)
+{
+	int ret;
+
+	mutex_lock(&(telm_conf->telem_lock));
+
+	if ((action == TELEM_UPDATE) && (telm_conf->telem_in_use)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = telemetry_check_evtid(TELEM_PSS, pss_evtconfig.evtmap,
+				    pss_evtconfig.num_evts, action);
+	if (ret)
+		goto out;
+
+	ret = telemetry_check_evtid(TELEM_IOSS, ioss_evtconfig.evtmap,
+				    ioss_evtconfig.num_evts, action);
+	if (ret)
+		goto out;
+
+	if (ioss_evtconfig.num_evts) {
+		ret = telemetry_setup_iossevtconfig(ioss_evtconfig, action);
+		if (ret)
+			goto out;
+	}
+
+	if (pss_evtconfig.num_evts) {
+		ret = telemetry_setup_pssevtconfig(pss_evtconfig, action);
+		if (ret)
+			goto out;
+	}
+
+	if ((action == TELEM_UPDATE) || (action == TELEM_ADD))
+		telm_conf->telem_in_use = true;
+	else
+		telm_conf->telem_in_use = false;
+
+out:
+	mutex_unlock(&(telm_conf->telem_lock));
+	return ret;
+}
+
+static int telemetry_setup(struct platform_device *pdev)
+{
+	struct telemetry_evtconfig pss_evtconfig, ioss_evtconfig;
+	u32 read_buf, events, event_regs;
+	int ret;
+
+	ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+					IOSS_TELEM_INFO_READ, NULL, 0,
+					&read_buf, sizeof(read_buf));
+	if (ret) {
+		dev_err(&pdev->dev, "IOSS TELEM_INFO Read Failed\n");
+		return ret;
+	}
+
+	/* Get telemetry Info */
+	events = (read_buf & TELEM_INFO_SRAMEVTS_MASK) >>
+		  TELEM_INFO_SRAMEVTS_SHIFT;
+	event_regs = read_buf & TELEM_INFO_NENABLES_MASK;
+	if ((events < TELEM_MAX_EVENTS_SRAM) ||
+	    (event_regs < TELEM_MAX_EVENTS_SRAM)) {
+		dev_err(&pdev->dev, "IOSS:Insufficient Space for SRAM Trace\n");
+		dev_err(&pdev->dev, "SRAM Events %d; Event Regs %d\n",
+			events, event_regs);
+		return -ENOMEM;
+	}
+
+	telm_conf->ioss_config.min_period = TELEM_MIN_PERIOD(read_buf);
+	telm_conf->ioss_config.max_period = TELEM_MAX_PERIOD(read_buf);
+
+	/* PUNIT Mailbox Setup */
+	ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_READ_TELE_INFO, 0, 0,
+				      NULL, &read_buf);
+	if (ret) {
+		dev_err(&pdev->dev, "PSS TELEM_INFO Read Failed\n");
+		return ret;
+	}
+
+	/* Get telemetry Info */
+	events = (read_buf & TELEM_INFO_SRAMEVTS_MASK) >>
+		  TELEM_INFO_SRAMEVTS_SHIFT;
+	event_regs = read_buf & TELEM_INFO_SRAMEVTS_MASK;
+	if ((events < TELEM_MAX_EVENTS_SRAM) ||
+	    (event_regs < TELEM_MAX_EVENTS_SRAM)) {
+		dev_err(&pdev->dev, "PSS:Insufficient Space for SRAM Trace\n");
+		dev_err(&pdev->dev, "SRAM Events %d; Event Regs %d\n",
+			events, event_regs);
+		return -ENOMEM;
+	}
+
+	telm_conf->pss_config.min_period = TELEM_MIN_PERIOD(read_buf);
+	telm_conf->pss_config.max_period = TELEM_MAX_PERIOD(read_buf);
+
+	pss_evtconfig.evtmap = NULL;
+	pss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS;
+	pss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD;
+
+	ioss_evtconfig.evtmap = NULL;
+	ioss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS;
+	ioss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD;
+
+	ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig,
+					TELEM_RESET);
+	if (ret) {
+		dev_err(&pdev->dev, "TELEMETRY Setup Failed\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int telemetry_plt_update_events(struct telemetry_evtconfig pss_evtconfig,
+				struct telemetry_evtconfig ioss_evtconfig)
+{
+	int ret;
+
+	if ((pss_evtconfig.num_evts > 0) &&
+	    (TELEM_SAMPLE_PERIOD_INVALID(pss_evtconfig.period))) {
+		pr_err("PSS Sampling Period Out of Range\n");
+		return -EINVAL;
+	}
+
+	if ((ioss_evtconfig.num_evts > 0) &&
+	    (TELEM_SAMPLE_PERIOD_INVALID(ioss_evtconfig.period))) {
+		pr_err("IOSS Sampling Period Out of Range\n");
+		return -EINVAL;
+	}
+
+	ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig,
+					TELEM_UPDATE);
+	if (ret)
+		pr_err("TELEMETRY Config Failed\n");
+
+	return ret;
+}
+
+
+static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
+{
+	u32 telem_ctrl = 0;
+	int ret = 0;
+
+	mutex_lock(&(telm_conf->telem_lock));
+	if (ioss_period) {
+		struct intel_scu_ipc_dev *scu = telm_conf->scu;
+
+		if (TELEM_SAMPLE_PERIOD_INVALID(ioss_period)) {
+			pr_err("IOSS Sampling Period Out of Range\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* Get telemetry EVENT CTL */
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+					    IOSS_TELEM_EVENT_CTL_READ, NULL, 0,
+					    &telem_ctrl, sizeof(telem_ctrl));
+		if (ret) {
+			pr_err("IOSS TELEM_CTRL Read Failed\n");
+			goto out;
+		}
+
+		/* Disable Telemetry */
+		TELEM_DISABLE(telem_ctrl);
+
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+						IOSS_TELEM_EVENT_CTL_WRITE,
+						&telem_ctrl, sizeof(telem_ctrl),
+						NULL, 0);
+		if (ret) {
+			pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
+			goto out;
+		}
+
+		/* Enable Periodic Telemetry Events and enable SRAM trace */
+		TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl);
+		TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl);
+		TELEM_ENABLE_PERIODIC(telem_ctrl);
+		telem_ctrl |= ioss_period;
+
+		ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+						IOSS_TELEM_EVENT_CTL_WRITE,
+						&telem_ctrl, sizeof(telem_ctrl),
+						NULL, 0);
+		if (ret) {
+			pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");
+			goto out;
+		}
+		telm_conf->ioss_config.curr_period = ioss_period;
+	}
+
+	if (pss_period) {
+		if (TELEM_SAMPLE_PERIOD_INVALID(pss_period)) {
+			pr_err("PSS Sampling Period Out of Range\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* Get telemetry EVENT CTL */
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL,
+				0, 0, NULL, &telem_ctrl);
+		if (ret) {
+			pr_err("PSS TELEM_CTRL Read Failed\n");
+			goto out;
+		}
+
+		/* Disable Telemetry */
+		TELEM_DISABLE(telem_ctrl);
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL,
+				0, 0, &telem_ctrl, NULL);
+		if (ret) {
+			pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");
+			goto out;
+		}
+
+		/* Enable Periodic Telemetry Events and enable SRAM trace */
+		TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl);
+		TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl);
+		TELEM_ENABLE_PERIODIC(telem_ctrl);
+		telem_ctrl |= pss_period;
+
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL,
+				0, 0, &telem_ctrl, NULL);
+		if (ret) {
+			pr_err("PSS TELEM_CTRL Event Enable Write Failed\n");
+			goto out;
+		}
+		telm_conf->pss_config.curr_period = pss_period;
+	}
+
+out:
+	mutex_unlock(&(telm_conf->telem_lock));
+	return ret;
+}
+
+
+static int telemetry_plt_get_sampling_period(u8 *pss_min_period,
+					     u8 *pss_max_period,
+					     u8 *ioss_min_period,
+					     u8 *ioss_max_period)
+{
+	*pss_min_period = telm_conf->pss_config.min_period;
+	*pss_max_period = telm_conf->pss_config.max_period;
+	*ioss_min_period = telm_conf->ioss_config.min_period;
+	*ioss_max_period = telm_conf->ioss_config.max_period;
+
+	return 0;
+}
+
+
+static int telemetry_plt_reset_events(void)
+{
+	struct telemetry_evtconfig pss_evtconfig, ioss_evtconfig;
+	int ret;
+
+	pss_evtconfig.evtmap = NULL;
+	pss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS;
+	pss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD;
+
+	ioss_evtconfig.evtmap = NULL;
+	ioss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS;
+	ioss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD;
+
+	ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig,
+					TELEM_RESET);
+	if (ret)
+		pr_err("TELEMETRY Reset Failed\n");
+
+	return ret;
+}
+
+
+static int telemetry_plt_get_eventconfig(struct telemetry_evtconfig *pss_config,
+					struct telemetry_evtconfig *ioss_config,
+					int pss_len, int ioss_len)
+{
+	u32 *pss_evtmap, *ioss_evtmap;
+	u32 index;
+
+	pss_evtmap = pss_config->evtmap;
+	ioss_evtmap = ioss_config->evtmap;
+
+	mutex_lock(&(telm_conf->telem_lock));
+	pss_config->num_evts = telm_conf->pss_config.ssram_evts_used;
+	ioss_config->num_evts = telm_conf->ioss_config.ssram_evts_used;
+
+	pss_config->period = telm_conf->pss_config.curr_period;
+	ioss_config->period = telm_conf->ioss_config.curr_period;
+
+	if ((pss_len < telm_conf->pss_config.ssram_evts_used) ||
+	    (ioss_len < telm_conf->ioss_config.ssram_evts_used)) {
+		mutex_unlock(&(telm_conf->telem_lock));
+		return -EINVAL;
+	}
+
+	for (index = 0; index < telm_conf->pss_config.ssram_evts_used;
+	     index++) {
+		pss_evtmap[index] =
+		telm_conf->pss_config.telem_evts[index].evt_id;
+	}
+
+	for (index = 0; index < telm_conf->ioss_config.ssram_evts_used;
+	     index++) {
+		ioss_evtmap[index] =
+		telm_conf->ioss_config.telem_evts[index].evt_id;
+	}
+
+	mutex_unlock(&(telm_conf->telem_lock));
+	return 0;
+}
+
+
+static int telemetry_plt_add_events(u8 num_pss_evts, u8 num_ioss_evts,
+				    u32 *pss_evtmap, u32 *ioss_evtmap)
+{
+	struct telemetry_evtconfig pss_evtconfig, ioss_evtconfig;
+	int ret;
+
+	pss_evtconfig.evtmap = pss_evtmap;
+	pss_evtconfig.num_evts = num_pss_evts;
+	pss_evtconfig.period = telm_conf->pss_config.curr_period;
+
+	ioss_evtconfig.evtmap = ioss_evtmap;
+	ioss_evtconfig.num_evts = num_ioss_evts;
+	ioss_evtconfig.period = telm_conf->ioss_config.curr_period;
+
+	ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig,
+					TELEM_ADD);
+	if (ret)
+		pr_err("TELEMETRY ADD Failed\n");
+
+	return ret;
+}
+
+static int telem_evtlog_read(enum telemetry_unit telem_unit,
+			     struct telem_ssram_region *ssram_region, u8 len)
+{
+	struct telemetry_unit_config *unit_config;
+	u64 timestamp_prev, timestamp_next;
+	int ret, index, timeout = 0;
+
+	ret = telem_get_unitconfig(telem_unit, &unit_config);
+	if (ret < 0)
+		return ret;
+
+	if (len > unit_config->ssram_evts_used)
+		len = unit_config->ssram_evts_used;
+
+	do {
+		timestamp_prev = readq(unit_config->regmap);
+		if (!timestamp_prev) {
+			pr_err("Ssram under update. Please Try Later\n");
+			return -EBUSY;
+		}
+
+		ssram_region->start_time = readq(unit_config->regmap +
+						 TELEM_SSRAM_STARTTIME_OFFSET);
+
+		for (index = 0; index < len; index++) {
+			ssram_region->events[index] =
+			readq(unit_config->regmap + TELEM_SSRAM_EVTLOG_OFFSET +
+			      BYTES_PER_LONG*index);
+		}
+
+		timestamp_next = readq(unit_config->regmap);
+		if (!timestamp_next) {
+			pr_err("Ssram under update. Please Try Later\n");
+			return -EBUSY;
+		}
+
+		if (timeout++ > TELEM_SSRAM_READ_TIMEOUT) {
+			pr_err("Timeout while reading Events\n");
+			return -EBUSY;
+		}
+
+	} while (timestamp_prev != timestamp_next);
+
+	ssram_region->timestamp = timestamp_next;
+
+	return len;
+}
+
+static int telemetry_plt_raw_read_eventlog(enum telemetry_unit telem_unit,
+					   struct telemetry_evtlog *evtlog,
+					   int len, int log_all_evts)
+{
+	int index, idx1, ret, readlen = len;
+	struct telem_ssram_region ssram_region;
+	struct telemetry_evtmap *evtmap;
+
+	switch (telem_unit)	{
+	case TELEM_PSS:
+		evtmap = telm_conf->pss_config.telem_evts;
+		break;
+
+	case TELEM_IOSS:
+		evtmap = telm_conf->ioss_config.telem_evts;
+		break;
+
+	default:
+		pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit);
+		return -EINVAL;
+	}
+
+	if (!log_all_evts)
+		readlen = TELEM_MAX_EVENTS_SRAM;
+
+	ret = telem_evtlog_read(telem_unit, &ssram_region, readlen);
+	if (ret < 0)
+		return ret;
+
+	/* Invalid evt-id array specified via length mismatch */
+	if ((!log_all_evts) && (len > ret))
+		return -EINVAL;
+
+	if (log_all_evts)
+		for (index = 0; index < ret; index++) {
+			evtlog[index].telem_evtlog = ssram_region.events[index];
+			evtlog[index].telem_evtid = evtmap[index].evt_id;
+		}
+	else
+		for (index = 0, readlen = 0; (index < ret) && (readlen < len);
+		     index++) {
+			for (idx1 = 0; idx1 < len; idx1++) {
+				/* Elements matched */
+				if (evtmap[index].evt_id ==
+				    evtlog[idx1].telem_evtid) {
+					evtlog[idx1].telem_evtlog =
+					ssram_region.events[index];
+					readlen++;
+
+					break;
+				}
+			}
+		}
+
+	return readlen;
+}
+
+static int telemetry_plt_read_eventlog(enum telemetry_unit telem_unit,
+		struct telemetry_evtlog *evtlog, int len, int log_all_evts)
+{
+	int ret;
+
+	mutex_lock(&(telm_conf->telem_lock));
+	ret = telemetry_plt_raw_read_eventlog(telem_unit, evtlog,
+					      len, log_all_evts);
+	mutex_unlock(&(telm_conf->telem_lock));
+
+	return ret;
+}
+
+static int telemetry_plt_get_trace_verbosity(enum telemetry_unit telem_unit,
+					     u32 *verbosity)
+{
+	u32 temp = 0;
+	int ret;
+
+	if (verbosity == NULL)
+		return -EINVAL;
+
+	mutex_lock(&(telm_conf->telem_trace_lock));
+	switch (telem_unit) {
+	case TELEM_PSS:
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL,
+				0, 0, NULL, &temp);
+		if (ret) {
+			pr_err("PSS TRACE_CTRL Read Failed\n");
+			goto out;
+		}
+
+		break;
+
+	case TELEM_IOSS:
+		ret = intel_scu_ipc_dev_command(telm_conf->scu,
+				IOSS_TELEM, IOSS_TELEM_TRACE_CTL_READ,
+				NULL, 0, &temp, sizeof(temp));
+		if (ret) {
+			pr_err("IOSS TRACE_CTL Read Failed\n");
+			goto out;
+		}
+
+		break;
+
+	default:
+		pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit);
+		ret = -EINVAL;
+		break;
+	}
+	TELEM_EXTRACT_VERBOSITY(temp, *verbosity);
+
+out:
+	mutex_unlock(&(telm_conf->telem_trace_lock));
+	return ret;
+}
+
+static int telemetry_plt_set_trace_verbosity(enum telemetry_unit telem_unit,
+					     u32 verbosity)
+{
+	u32 temp = 0;
+	int ret;
+
+	verbosity &= TELEM_TRC_VERBOSITY_MASK;
+
+	mutex_lock(&(telm_conf->telem_trace_lock));
+	switch (telem_unit) {
+	case TELEM_PSS:
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL,
+				0, 0, NULL, &temp);
+		if (ret) {
+			pr_err("PSS TRACE_CTRL Read Failed\n");
+			goto out;
+		}
+
+		TELEM_CLEAR_VERBOSITY_BITS(temp);
+		TELEM_SET_VERBOSITY_BITS(temp, verbosity);
+
+		ret = intel_punit_ipc_command(
+				IPC_PUNIT_BIOS_WRITE_TELE_TRACE_CTRL,
+				0, 0, &temp, NULL);
+		if (ret) {
+			pr_err("PSS TRACE_CTRL Verbosity Set Failed\n");
+			goto out;
+		}
+		break;
+
+	case TELEM_IOSS:
+		ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+						IOSS_TELEM_TRACE_CTL_READ,
+						NULL, 0, &temp, sizeof(temp));
+		if (ret) {
+			pr_err("IOSS TRACE_CTL Read Failed\n");
+			goto out;
+		}
+
+		TELEM_CLEAR_VERBOSITY_BITS(temp);
+		TELEM_SET_VERBOSITY_BITS(temp, verbosity);
+
+		ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+						IOSS_TELEM_TRACE_CTL_WRITE,
+						&temp, sizeof(temp), NULL, 0);
+		if (ret) {
+			pr_err("IOSS TRACE_CTL Verbosity Set Failed\n");
+			goto out;
+		}
+		break;
+
+	default:
+		pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit);
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	mutex_unlock(&(telm_conf->telem_trace_lock));
+	return ret;
+}
+
+static const struct telemetry_core_ops telm_pltops = {
+	.get_trace_verbosity = telemetry_plt_get_trace_verbosity,
+	.set_trace_verbosity = telemetry_plt_set_trace_verbosity,
+	.set_sampling_period = telemetry_plt_set_sampling_period,
+	.get_sampling_period = telemetry_plt_get_sampling_period,
+	.raw_read_eventlog = telemetry_plt_raw_read_eventlog,
+	.get_eventconfig = telemetry_plt_get_eventconfig,
+	.update_events = telemetry_plt_update_events,
+	.read_eventlog = telemetry_plt_read_eventlog,
+	.reset_events = telemetry_plt_reset_events,
+	.add_events = telemetry_plt_add_events,
+};
+
+static int telemetry_pltdrv_probe(struct platform_device *pdev)
+{
+	const struct x86_cpu_id *id;
+	void __iomem *mem;
+	int ret;
+
+	id = x86_match_cpu(telemetry_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	telm_conf = (struct telemetry_plt_config *)id->driver_data;
+
+	telm_conf->pmc = dev_get_drvdata(pdev->dev.parent);
+
+	mem = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	telm_conf->pss_config.regmap = mem;
+
+	mem = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	telm_conf->ioss_config.regmap = mem;
+
+	telm_conf->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+	if (!telm_conf->scu) {
+		ret = -EPROBE_DEFER;
+		goto out;
+	}
+
+	mutex_init(&telm_conf->telem_lock);
+	mutex_init(&telm_conf->telem_trace_lock);
+
+	ret = telemetry_setup(pdev);
+	if (ret)
+		goto out;
+
+	ret = telemetry_set_pltdata(&telm_pltops, telm_conf);
+	if (ret) {
+		dev_err(&pdev->dev, "TELEMETRY Set Pltops Failed.\n");
+		goto out;
+	}
+
+	return 0;
+
+out:
+	dev_err(&pdev->dev, "TELEMETRY Setup Failed.\n");
+
+	return ret;
+}
+
+static int telemetry_pltdrv_remove(struct platform_device *pdev)
+{
+	telemetry_clear_pltdata();
+	return 0;
+}
+
+static struct platform_driver telemetry_soc_driver = {
+	.probe		= telemetry_pltdrv_probe,
+	.remove		= telemetry_pltdrv_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init telemetry_module_init(void)
+{
+	return platform_driver_register(&telemetry_soc_driver);
+}
+
+static void __exit telemetry_module_exit(void)
+{
+	platform_driver_unregister(&telemetry_soc_driver);
+}
+
+device_initcall(telemetry_module_init);
+module_exit(telemetry_module_exit);
+
+MODULE_AUTHOR("Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>");
+MODULE_DESCRIPTION("Intel SoC Telemetry Platform Driver");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/turbo_max_3.c b/drivers/platform/x86/intel/turbo_max_3.c
new file mode 100644
index 000000000..892140b62
--- /dev/null
+++ b/drivers/platform/x86/intel/turbo_max_3.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Turbo Boost Max Technology 3.0 legacy (non HWP) enumeration driver
+ * Copyright (c) 2017, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufeature.h>
+#include <linux/cpuhotplug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/topology.h>
+#include <linux/workqueue.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+#define MSR_OC_MAILBOX			0x150
+#define MSR_OC_MAILBOX_CMD_OFFSET	32
+#define MSR_OC_MAILBOX_RSP_OFFSET	32
+#define MSR_OC_MAILBOX_BUSY_BIT		63
+#define OC_MAILBOX_FC_CONTROL_CMD	0x1C
+
+/*
+ * Typical latency to get mail box response is ~3us, It takes +3 us to
+ * process reading mailbox after issuing mailbox write on a Broadwell 3.4 GHz
+ * system. So for most of the time, the first mailbox read should have the
+ * response, but to avoid some boundary cases retry twice.
+ */
+#define OC_MAILBOX_RETRY_COUNT		2
+
+static int get_oc_core_priority(unsigned int cpu)
+{
+	u64 value, cmd = OC_MAILBOX_FC_CONTROL_CMD;
+	int ret, i;
+
+	/* Issue favored core read command */
+	value = cmd << MSR_OC_MAILBOX_CMD_OFFSET;
+	/* Set the busy bit to indicate OS is trying to issue command */
+	value |=  BIT_ULL(MSR_OC_MAILBOX_BUSY_BIT);
+	ret = wrmsrl_safe(MSR_OC_MAILBOX, value);
+	if (ret) {
+		pr_debug("cpu %d OC mailbox write failed\n", cpu);
+		return ret;
+	}
+
+	for (i = 0; i < OC_MAILBOX_RETRY_COUNT; ++i) {
+		ret = rdmsrl_safe(MSR_OC_MAILBOX, &value);
+		if (ret) {
+			pr_debug("cpu %d OC mailbox read failed\n", cpu);
+			break;
+		}
+
+		if (value & BIT_ULL(MSR_OC_MAILBOX_BUSY_BIT)) {
+			pr_debug("cpu %d OC mailbox still processing\n", cpu);
+			ret = -EBUSY;
+			continue;
+		}
+
+		if ((value >> MSR_OC_MAILBOX_RSP_OFFSET) & 0xff) {
+			pr_debug("cpu %d OC mailbox cmd failed\n", cpu);
+			ret = -ENXIO;
+			break;
+		}
+
+		ret = value & 0xff;
+		pr_debug("cpu %d max_ratio %d\n", cpu, ret);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * The work item is needed to avoid CPU hotplug locking issues. The function
+ * itmt_legacy_set_priority() is called from CPU online callback, so can't
+ * call sched_set_itmt_support() from there as this function will aquire
+ * hotplug locks in its path.
+ */
+static void itmt_legacy_work_fn(struct work_struct *work)
+{
+	sched_set_itmt_support();
+}
+
+static DECLARE_WORK(sched_itmt_work, itmt_legacy_work_fn);
+
+static int itmt_legacy_cpu_online(unsigned int cpu)
+{
+	static u32 max_highest_perf = 0, min_highest_perf = U32_MAX;
+	int priority;
+
+	priority = get_oc_core_priority(cpu);
+	if (priority < 0)
+		return 0;
+
+	sched_set_itmt_core_prio(priority, cpu);
+
+	/* Enable ITMT feature when a core with different priority is found */
+	if (max_highest_perf <= min_highest_perf) {
+		if (priority > max_highest_perf)
+			max_highest_perf = priority;
+
+		if (priority < min_highest_perf)
+			min_highest_perf = priority;
+
+		if (max_highest_perf > min_highest_perf)
+			schedule_work(&sched_itmt_work);
+	}
+
+	return 0;
+}
+
+static const struct x86_cpu_id itmt_legacy_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	NULL),
+	{}
+};
+
+static int __init itmt_legacy_init(void)
+{
+	const struct x86_cpu_id *id;
+	int ret;
+
+	id = x86_match_cpu(itmt_legacy_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				"platform/x86/turbo_max_3:online",
+				itmt_legacy_cpu_online,	NULL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+late_initcall(itmt_legacy_init)
diff --git a/drivers/platform/x86/intel/uncore-frequency/Kconfig b/drivers/platform/x86/intel/uncore-frequency/Kconfig
new file mode 100644
index 000000000..21b209124
--- /dev/null
+++ b/drivers/platform/x86/intel/uncore-frequency/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Uncore Frquency control drivers
+#
+
+menu "Intel Uncore Frequency Control"
+	depends on X86_64 || COMPILE_TEST
+
+config INTEL_UNCORE_FREQ_CONTROL
+	tristate "Intel Uncore frequency control driver"
+	depends on X86_64
+	help
+	  This driver allows control of Uncore frequency limits on
+	  supported server platforms.
+
+	  Uncore frequency controls RING/LLC (last-level cache) clocks.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-uncore-frequency.
+
+endmenu
diff --git a/drivers/platform/x86/intel/uncore-frequency/Makefile b/drivers/platform/x86/intel/uncore-frequency/Makefile
new file mode 100644
index 000000000..e0f7968e8
--- /dev/null
+++ b/drivers/platform/x86/intel/uncore-frequency/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for linux/drivers/platform/x86/intel/uncore-frequency
+#
+
+obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)	+= intel-uncore-frequency.o
+intel-uncore-frequency-y		:= uncore-frequency.o
+obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)	+= intel-uncore-frequency-common.o
+intel-uncore-frequency-common-y		:= uncore-frequency-common.o
diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c
new file mode 100644
index 000000000..dd2e654da
--- /dev/null
+++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Uncore Frequency Control: Common code implementation
+ * Copyright (c) 2022, Intel Corporation.
+ * All rights reserved.
+ *
+ */
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include "uncore-frequency-common.h"
+
+/* Mutex to control all mutual exclusions */
+static DEFINE_MUTEX(uncore_lock);
+/* Root of the all uncore sysfs kobjs */
+static struct kobject *uncore_root_kobj;
+/* uncore instance count */
+static int uncore_instance_count;
+
+/* callbacks for actual HW read/write */
+static int (*uncore_read)(struct uncore_data *data, unsigned int *min, unsigned int *max);
+static int (*uncore_write)(struct uncore_data *data, unsigned int input, unsigned int min_max);
+static int (*uncore_read_freq)(struct uncore_data *data, unsigned int *freq);
+
+static ssize_t show_min_max_freq_khz(struct uncore_data *data,
+				      char *buf, int min_max)
+{
+	unsigned int min, max;
+	int ret;
+
+	mutex_lock(&uncore_lock);
+	ret = uncore_read(data, &min, &max);
+	mutex_unlock(&uncore_lock);
+	if (ret)
+		return ret;
+
+	if (min_max)
+		return sprintf(buf, "%u\n", max);
+
+	return sprintf(buf, "%u\n", min);
+}
+
+static ssize_t store_min_max_freq_khz(struct uncore_data *data,
+				      const char *buf, ssize_t count,
+				      int min_max)
+{
+	unsigned int input;
+	int ret;
+
+	if (kstrtouint(buf, 10, &input))
+		return -EINVAL;
+
+	mutex_lock(&uncore_lock);
+	ret = uncore_write(data, input, min_max);
+	mutex_unlock(&uncore_lock);
+
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t show_perf_status_freq_khz(struct uncore_data *data, char *buf)
+{
+	unsigned int freq;
+	int ret;
+
+	mutex_lock(&uncore_lock);
+	ret = uncore_read_freq(data, &freq);
+	mutex_unlock(&uncore_lock);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", freq);
+}
+
+#define store_uncore_min_max(name, min_max)				\
+	static ssize_t store_##name(struct kobject *kobj,		\
+				     struct kobj_attribute *attr,	\
+				     const char *buf, size_t count)	\
+	{								\
+		struct uncore_data *data = container_of(attr, struct uncore_data, name##_kobj_attr);\
+									\
+		return store_min_max_freq_khz(data, buf, count,	\
+					      min_max);		\
+	}
+
+#define show_uncore_min_max(name, min_max)				\
+	static ssize_t show_##name(struct kobject *kobj,		\
+				    struct kobj_attribute *attr, char *buf)\
+	{                                                               \
+		struct uncore_data *data = container_of(attr, struct uncore_data, name##_kobj_attr);\
+									\
+		return show_min_max_freq_khz(data, buf, min_max);	\
+	}
+
+#define show_uncore_perf_status(name)					\
+	static ssize_t show_##name(struct kobject *kobj,		\
+				   struct kobj_attribute *attr, char *buf)\
+	{                                                               \
+		struct uncore_data *data = container_of(attr, struct uncore_data, name##_kobj_attr);\
+									\
+		return show_perf_status_freq_khz(data, buf); \
+	}
+
+store_uncore_min_max(min_freq_khz, 0);
+store_uncore_min_max(max_freq_khz, 1);
+
+show_uncore_min_max(min_freq_khz, 0);
+show_uncore_min_max(max_freq_khz, 1);
+
+show_uncore_perf_status(current_freq_khz);
+
+#define show_uncore_data(member_name)					\
+	static ssize_t show_##member_name(struct kobject *kobj,	\
+					   struct kobj_attribute *attr, char *buf)\
+	{                                                               \
+		struct uncore_data *data = container_of(attr, struct uncore_data,\
+							  member_name##_kobj_attr);\
+									\
+		return sysfs_emit(buf, "%u\n",				\
+				 data->member_name);			\
+	}								\
+
+show_uncore_data(initial_min_freq_khz);
+show_uncore_data(initial_max_freq_khz);
+
+#define init_attribute_rw(_name)					\
+	do {								\
+		sysfs_attr_init(&data->_name##_kobj_attr.attr);	\
+		data->_name##_kobj_attr.show = show_##_name;		\
+		data->_name##_kobj_attr.store = store_##_name;		\
+		data->_name##_kobj_attr.attr.name = #_name;		\
+		data->_name##_kobj_attr.attr.mode = 0644;		\
+	} while (0)
+
+#define init_attribute_ro(_name)					\
+	do {								\
+		sysfs_attr_init(&data->_name##_kobj_attr.attr);	\
+		data->_name##_kobj_attr.show = show_##_name;		\
+		data->_name##_kobj_attr.store = NULL;			\
+		data->_name##_kobj_attr.attr.name = #_name;		\
+		data->_name##_kobj_attr.attr.mode = 0444;		\
+	} while (0)
+
+#define init_attribute_root_ro(_name)					\
+	do {								\
+		sysfs_attr_init(&data->_name##_kobj_attr.attr);	\
+		data->_name##_kobj_attr.show = show_##_name;		\
+		data->_name##_kobj_attr.store = NULL;			\
+		data->_name##_kobj_attr.attr.name = #_name;		\
+		data->_name##_kobj_attr.attr.mode = 0400;		\
+	} while (0)
+
+static int create_attr_group(struct uncore_data *data, char *name)
+{
+	int ret, freq, index = 0;
+
+	init_attribute_rw(max_freq_khz);
+	init_attribute_rw(min_freq_khz);
+	init_attribute_ro(initial_min_freq_khz);
+	init_attribute_ro(initial_max_freq_khz);
+	init_attribute_root_ro(current_freq_khz);
+
+	data->uncore_attrs[index++] = &data->max_freq_khz_kobj_attr.attr;
+	data->uncore_attrs[index++] = &data->min_freq_khz_kobj_attr.attr;
+	data->uncore_attrs[index++] = &data->initial_min_freq_khz_kobj_attr.attr;
+	data->uncore_attrs[index++] = &data->initial_max_freq_khz_kobj_attr.attr;
+
+	ret = uncore_read_freq(data, &freq);
+	if (!ret)
+		data->uncore_attrs[index++] = &data->current_freq_khz_kobj_attr.attr;
+
+	data->uncore_attrs[index] = NULL;
+
+	data->uncore_attr_group.name = name;
+	data->uncore_attr_group.attrs = data->uncore_attrs;
+	ret = sysfs_create_group(uncore_root_kobj, &data->uncore_attr_group);
+
+	return ret;
+}
+
+static void delete_attr_group(struct uncore_data *data, char *name)
+{
+	sysfs_remove_group(uncore_root_kobj, &data->uncore_attr_group);
+}
+
+int uncore_freq_add_entry(struct uncore_data *data, int cpu)
+{
+	int ret = 0;
+
+	mutex_lock(&uncore_lock);
+	if (data->valid) {
+		/* control cpu changed */
+		data->control_cpu = cpu;
+		goto uncore_unlock;
+	}
+
+	sprintf(data->name, "package_%02d_die_%02d", data->package_id, data->die_id);
+
+	uncore_read(data, &data->initial_min_freq_khz, &data->initial_max_freq_khz);
+
+	ret = create_attr_group(data, data->name);
+	if (!ret) {
+		data->control_cpu = cpu;
+		data->valid = true;
+	}
+
+uncore_unlock:
+	mutex_unlock(&uncore_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(uncore_freq_add_entry, INTEL_UNCORE_FREQUENCY);
+
+void uncore_freq_remove_die_entry(struct uncore_data *data)
+{
+	mutex_lock(&uncore_lock);
+	delete_attr_group(data, data->name);
+	data->control_cpu = -1;
+	data->valid = false;
+	mutex_unlock(&uncore_lock);
+}
+EXPORT_SYMBOL_NS_GPL(uncore_freq_remove_die_entry, INTEL_UNCORE_FREQUENCY);
+
+int uncore_freq_common_init(int (*read_control_freq)(struct uncore_data *data, unsigned int *min, unsigned int *max),
+			     int (*write_control_freq)(struct uncore_data *data, unsigned int input, unsigned int set_max),
+			     int (*read_freq)(struct uncore_data *data, unsigned int *freq))
+{
+	mutex_lock(&uncore_lock);
+
+	uncore_read = read_control_freq;
+	uncore_write = write_control_freq;
+	uncore_read_freq = read_freq;
+
+	if (!uncore_root_kobj)
+		uncore_root_kobj = kobject_create_and_add("intel_uncore_frequency",
+							    &cpu_subsys.dev_root->kobj);
+	if (uncore_root_kobj)
+		++uncore_instance_count;
+	mutex_unlock(&uncore_lock);
+
+	return uncore_root_kobj ? 0 : -ENOMEM;
+}
+EXPORT_SYMBOL_NS_GPL(uncore_freq_common_init, INTEL_UNCORE_FREQUENCY);
+
+void uncore_freq_common_exit(void)
+{
+	mutex_lock(&uncore_lock);
+	--uncore_instance_count;
+	if (!uncore_instance_count) {
+		kobject_put(uncore_root_kobj);
+		uncore_root_kobj = NULL;
+	}
+	mutex_unlock(&uncore_lock);
+}
+EXPORT_SYMBOL_NS_GPL(uncore_freq_common_exit, INTEL_UNCORE_FREQUENCY);
+
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Uncore Frequency Common Module");
diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h
new file mode 100644
index 000000000..2d9dc3151
--- /dev/null
+++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Intel Uncore Frequency Control: Common defines and prototypes
+ * Copyright (c) 2022, Intel Corporation.
+ * All rights reserved.
+ *
+ */
+
+#ifndef __INTEL_UNCORE_FREQ_COMMON_H
+#define __INTEL_UNCORE_FREQ_COMMON_H
+
+#include <linux/device.h>
+
+/**
+ * struct uncore_data - Encapsulate all uncore data
+ * @stored_uncore_data: Last user changed MSR 620 value, which will be restored
+ *			on system resume.
+ * @initial_min_freq_khz: Sampled minimum uncore frequency at driver init
+ * @initial_max_freq_khz: Sampled maximum uncore frequency at driver init
+ * @control_cpu:	Designated CPU for a die to read/write
+ * @valid:		Mark the data valid/invalid
+ * @package_id:	Package id for this instance
+ * @die_id:		Die id for this instance
+ * @name:		Sysfs entry name for this instance
+ * @uncore_attr_group:	Attribute group storage
+ * @max_freq_khz_dev_attr: Storage for kobject attribute max_freq_khz
+ * @mix_freq_khz_dev_attr: Storage for kobject attribute min_freq_khz
+ * @initial_max_freq_khz_dev_attr: Storage for kobject attribute initial_max_freq_khz
+ * @initial_min_freq_khz_dev_attr: Storage for kobject attribute initial_min_freq_khz
+ * @current_freq_khz_dev_attr: Storage for kobject attribute current_freq_khz
+ * @uncore_attrs:	Attribute storage for group creation
+ *
+ * This structure is used to encapsulate all data related to uncore sysfs
+ * settings for a die/package.
+ */
+struct uncore_data {
+	u64 stored_uncore_data;
+	u32 initial_min_freq_khz;
+	u32 initial_max_freq_khz;
+	int control_cpu;
+	bool valid;
+	int package_id;
+	int die_id;
+	char name[32];
+
+	struct attribute_group uncore_attr_group;
+	struct kobj_attribute max_freq_khz_kobj_attr;
+	struct kobj_attribute min_freq_khz_kobj_attr;
+	struct kobj_attribute initial_max_freq_khz_kobj_attr;
+	struct kobj_attribute initial_min_freq_khz_kobj_attr;
+	struct kobj_attribute current_freq_khz_kobj_attr;
+	struct attribute *uncore_attrs[6];
+};
+
+int uncore_freq_common_init(int (*read_control_freq)(struct uncore_data *data, unsigned int *min, unsigned int *max),
+			     int (*write_control_freq)(struct uncore_data *data, unsigned int input, unsigned int min_max),
+			     int (*uncore_read_freq)(struct uncore_data *data, unsigned int *freq));
+void uncore_freq_common_exit(void);
+int uncore_freq_add_entry(struct uncore_data *data, int cpu);
+void uncore_freq_remove_die_entry(struct uncore_data *data);
+
+#endif
diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c
new file mode 100644
index 000000000..00ac7e381
--- /dev/null
+++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Uncore Frequency Setting
+ * Copyright (c) 2022, Intel Corporation.
+ * All rights reserved.
+ *
+ * Provide interface to set MSR 620 at a granularity of per die. On CPU online,
+ * one control CPU is identified per die to read/write limit. This control CPU
+ * is changed, if the CPU state is changed to offline. When the last CPU is
+ * offline in a die then remove the sysfs object for that die.
+ * The majority of actual code is related to sysfs create and read/write
+ * attributes.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+ */
+
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+#include "uncore-frequency-common.h"
+
+/* Max instances for uncore data, one for each die */
+static int uncore_max_entries __read_mostly;
+/* Storage for uncore data for all instances */
+static struct uncore_data *uncore_instances;
+/* Stores the CPU mask of the target CPUs to use during uncore read/write */
+static cpumask_t uncore_cpu_mask;
+/* CPU online callback register instance */
+static enum cpuhp_state uncore_hp_state __read_mostly;
+
+#define MSR_UNCORE_RATIO_LIMIT	0x620
+#define MSR_UNCORE_PERF_STATUS	0x621
+#define UNCORE_FREQ_KHZ_MULTIPLIER	100000
+
+static int uncore_read_control_freq(struct uncore_data *data, unsigned int *min,
+				    unsigned int *max)
+{
+	u64 cap;
+	int ret;
+
+	if (data->control_cpu < 0)
+		return -ENXIO;
+
+	ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, &cap);
+	if (ret)
+		return ret;
+
+	*max = (cap & 0x7F) * UNCORE_FREQ_KHZ_MULTIPLIER;
+	*min = ((cap & GENMASK(14, 8)) >> 8) * UNCORE_FREQ_KHZ_MULTIPLIER;
+
+	return 0;
+}
+
+static int uncore_write_control_freq(struct uncore_data *data, unsigned int input,
+				     unsigned int min_max)
+{
+	int ret;
+	u64 cap;
+
+	input /= UNCORE_FREQ_KHZ_MULTIPLIER;
+	if (!input || input > 0x7F)
+		return -EINVAL;
+
+	if (data->control_cpu < 0)
+		return -ENXIO;
+
+	ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, &cap);
+	if (ret)
+		return ret;
+
+	if (min_max) {
+		cap &= ~0x7F;
+		cap |= input;
+	} else  {
+		cap &= ~GENMASK(14, 8);
+		cap |= (input << 8);
+	}
+
+	ret = wrmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, cap);
+	if (ret)
+		return ret;
+
+	data->stored_uncore_data = cap;
+
+	return 0;
+}
+
+static int uncore_read_freq(struct uncore_data *data, unsigned int *freq)
+{
+	u64 ratio;
+	int ret;
+
+	if (data->control_cpu < 0)
+		return -ENXIO;
+
+	ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_PERF_STATUS, &ratio);
+	if (ret)
+		return ret;
+
+	*freq = (ratio & 0x7F) * UNCORE_FREQ_KHZ_MULTIPLIER;
+
+	return 0;
+}
+
+/* Caller provides protection */
+static struct uncore_data *uncore_get_instance(unsigned int cpu)
+{
+	int id = topology_logical_die_id(cpu);
+
+	if (id >= 0 && id < uncore_max_entries)
+		return &uncore_instances[id];
+
+	return NULL;
+}
+
+static int uncore_event_cpu_online(unsigned int cpu)
+{
+	struct uncore_data *data;
+	int target;
+
+	/* Check if there is an online cpu in the package for uncore MSR */
+	target = cpumask_any_and(&uncore_cpu_mask, topology_die_cpumask(cpu));
+	if (target < nr_cpu_ids)
+		return 0;
+
+	/* Use this CPU on this die as a control CPU */
+	cpumask_set_cpu(cpu, &uncore_cpu_mask);
+
+	data = uncore_get_instance(cpu);
+	if (!data)
+		return 0;
+
+	data->package_id = topology_physical_package_id(cpu);
+	data->die_id = topology_die_id(cpu);
+
+	return uncore_freq_add_entry(data, cpu);
+}
+
+static int uncore_event_cpu_offline(unsigned int cpu)
+{
+	struct uncore_data *data;
+	int target;
+
+	data = uncore_get_instance(cpu);
+	if (!data)
+		return 0;
+
+	/* Check if existing cpu is used for uncore MSRs */
+	if (!cpumask_test_and_clear_cpu(cpu, &uncore_cpu_mask))
+		return 0;
+
+	/* Find a new cpu to set uncore MSR */
+	target = cpumask_any_but(topology_die_cpumask(cpu), cpu);
+
+	if (target < nr_cpu_ids) {
+		cpumask_set_cpu(target, &uncore_cpu_mask);
+		uncore_freq_add_entry(data, target);
+	} else {
+		uncore_freq_remove_die_entry(data);
+	}
+
+	return 0;
+}
+
+static int uncore_pm_notify(struct notifier_block *nb, unsigned long mode,
+			    void *_unused)
+{
+	int i;
+
+	switch (mode) {
+	case PM_POST_HIBERNATION:
+	case PM_POST_RESTORE:
+	case PM_POST_SUSPEND:
+		for (i = 0; i < uncore_max_entries; ++i) {
+			struct uncore_data *data = &uncore_instances[i];
+
+			if (!data || !data->valid || !data->stored_uncore_data)
+				return 0;
+
+			wrmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT,
+				      data->stored_uncore_data);
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block uncore_pm_nb = {
+	.notifier_call = uncore_pm_notify,
+};
+
+static const struct x86_cpu_id intel_uncore_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_G,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, NULL),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_uncore_cpu_ids);
+
+static int __init intel_uncore_init(void)
+{
+	const struct x86_cpu_id *id;
+	int ret;
+
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return -ENODEV;
+
+	id = x86_match_cpu(intel_uncore_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	uncore_max_entries = topology_max_packages() *
+					topology_max_die_per_package();
+	uncore_instances = kcalloc(uncore_max_entries,
+				   sizeof(*uncore_instances), GFP_KERNEL);
+	if (!uncore_instances)
+		return -ENOMEM;
+
+	ret = uncore_freq_common_init(uncore_read_control_freq, uncore_write_control_freq,
+				      uncore_read_freq);
+	if (ret)
+		goto err_free;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				"platform/x86/uncore-freq:online",
+				uncore_event_cpu_online,
+				uncore_event_cpu_offline);
+	if (ret < 0)
+		goto err_rem_kobj;
+
+	uncore_hp_state = ret;
+
+	ret = register_pm_notifier(&uncore_pm_nb);
+	if (ret)
+		goto err_rem_state;
+
+	return 0;
+
+err_rem_state:
+	cpuhp_remove_state(uncore_hp_state);
+err_rem_kobj:
+	uncore_freq_common_exit();
+err_free:
+	kfree(uncore_instances);
+
+	return ret;
+}
+module_init(intel_uncore_init)
+
+static void __exit intel_uncore_exit(void)
+{
+	int i;
+
+	unregister_pm_notifier(&uncore_pm_nb);
+	cpuhp_remove_state(uncore_hp_state);
+	for (i = 0; i < uncore_max_entries; ++i)
+		uncore_freq_remove_die_entry(&uncore_instances[i]);
+	uncore_freq_common_exit();
+	kfree(uncore_instances);
+}
+module_exit(intel_uncore_exit)
+
+MODULE_IMPORT_NS(INTEL_UNCORE_FREQUENCY);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Uncore Frequency Limits Driver");
diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c
new file mode 100644
index 000000000..8e2b07ed2
--- /dev/null
+++ b/drivers/platform/x86/intel/vbtn.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Intel Virtual Button driver for Windows 8.1+
+ *
+ *  Copyright (C) 2016 AceLan Kao <acelan.kao@canonical.com>
+ *  Copyright (C) 2016 Alex Hung <alex.hung@canonical.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include "../dual_accel_detect.h"
+
+/* Returned when NOT in tablet mode on some HP Stream x360 11 models */
+#define VGBS_TABLET_MODE_FLAG_ALT	0x10
+/* When NOT in tablet mode, VGBS returns with the flag 0x40 */
+#define VGBS_TABLET_MODE_FLAG		0x40
+#define VGBS_DOCK_MODE_FLAG		0x80
+
+#define VGBS_TABLET_MODE_FLAGS (VGBS_TABLET_MODE_FLAG | VGBS_TABLET_MODE_FLAG_ALT)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("AceLan Kao");
+
+static const struct acpi_device_id intel_vbtn_ids[] = {
+	{"INT33D6", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, intel_vbtn_ids);
+
+/* In theory, these are HID usages. */
+static const struct key_entry intel_vbtn_keymap[] = {
+	{ KE_KEY, 0xC0, { KEY_POWER } },	/* power key press */
+	{ KE_IGNORE, 0xC1, { KEY_POWER } },	/* power key release */
+	{ KE_KEY, 0xC2, { KEY_LEFTMETA } },		/* 'Windows' key press */
+	{ KE_KEY, 0xC3, { KEY_LEFTMETA } },		/* 'Windows' key release */
+	{ KE_KEY, 0xC4, { KEY_VOLUMEUP } },		/* volume-up key press */
+	{ KE_IGNORE, 0xC5, { KEY_VOLUMEUP } },		/* volume-up key release */
+	{ KE_KEY, 0xC6, { KEY_VOLUMEDOWN } },		/* volume-down key press */
+	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },	/* volume-down key release */
+	{ KE_KEY,    0xC8, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key press */
+	{ KE_KEY,    0xC9, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key release */
+	{ KE_END }
+};
+
+static const struct key_entry intel_vbtn_switchmap[] = {
+	/*
+	 * SW_DOCK should only be reported for docking stations, but DSDTs using the
+	 * intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set
+	 * SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0).
+	 * This causes userspace to think the laptop is docked to a port-replicator
+	 * and to disable suspend-on-lid-close, which is undesirable.
+	 * Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.
+	 */
+	{ KE_IGNORE, 0xCA, { .sw = { SW_DOCK, 1 } } },		/* Docked */
+	{ KE_IGNORE, 0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
+	{ KE_SW,     0xCC, { .sw = { SW_TABLET_MODE, 1 } } },	/* Tablet */
+	{ KE_SW,     0xCD, { .sw = { SW_TABLET_MODE, 0 } } },	/* Laptop */
+	{ KE_END }
+};
+
+struct intel_vbtn_priv {
+	struct input_dev *buttons_dev;
+	struct input_dev *switches_dev;
+	bool dual_accel;
+	bool has_buttons;
+	bool has_switches;
+	bool wakeup_mode;
+};
+
+static void detect_tablet_mode(struct device *dev)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+	acpi_handle handle = ACPI_HANDLE(dev);
+	unsigned long long vgbs;
+	acpi_status status;
+	int m;
+
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
+	if (ACPI_FAILURE(status))
+		return;
+
+	m = !(vgbs & VGBS_TABLET_MODE_FLAGS);
+	input_report_switch(priv->switches_dev, SW_TABLET_MODE, m);
+	m = (vgbs & VGBS_DOCK_MODE_FLAG) ? 1 : 0;
+	input_report_switch(priv->switches_dev, SW_DOCK, m);
+
+	input_sync(priv->switches_dev);
+}
+
+/*
+ * Note this unconditionally creates the 2 input_dev-s and sets up
+ * the sparse-keymaps. Only the registration is conditional on
+ * have_buttons / have_switches. This is done so that the notify
+ * handler can always call sparse_keymap_entry_from_scancode()
+ * on the input_dev-s do determine the event type.
+ */
+static int intel_vbtn_input_setup(struct platform_device *device)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
+	int ret;
+
+	priv->buttons_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->buttons_dev)
+		return -ENOMEM;
+
+	ret = sparse_keymap_setup(priv->buttons_dev, intel_vbtn_keymap, NULL);
+	if (ret)
+		return ret;
+
+	priv->buttons_dev->dev.parent = &device->dev;
+	priv->buttons_dev->name = "Intel Virtual Buttons";
+	priv->buttons_dev->id.bustype = BUS_HOST;
+
+	if (priv->has_buttons) {
+		ret = input_register_device(priv->buttons_dev);
+		if (ret)
+			return ret;
+	}
+
+	priv->switches_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->switches_dev)
+		return -ENOMEM;
+
+	ret = sparse_keymap_setup(priv->switches_dev, intel_vbtn_switchmap, NULL);
+	if (ret)
+		return ret;
+
+	priv->switches_dev->dev.parent = &device->dev;
+	priv->switches_dev->name = "Intel Virtual Switches";
+	priv->switches_dev->id.bustype = BUS_HOST;
+
+	if (priv->has_switches) {
+		detect_tablet_mode(&device->dev);
+
+		ret = input_register_device(priv->switches_dev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void notify_handler(acpi_handle handle, u32 event, void *context)
+{
+	struct platform_device *device = context;
+	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
+	unsigned int val = !(event & 1); /* Even=press, Odd=release */
+	const struct key_entry *ke, *ke_rel;
+	struct input_dev *input_dev;
+	bool autorelease;
+	int ret;
+
+	if ((ke = sparse_keymap_entry_from_scancode(priv->buttons_dev, event))) {
+		if (!priv->has_buttons) {
+			dev_warn(&device->dev, "Warning: received a button event on a device without buttons, please report this.\n");
+			return;
+		}
+		input_dev = priv->buttons_dev;
+	} else if ((ke = sparse_keymap_entry_from_scancode(priv->switches_dev, event))) {
+		if (!priv->has_switches) {
+			/* See dual_accel_detect.h for more info */
+			if (priv->dual_accel)
+				return;
+
+			dev_info(&device->dev, "Registering Intel Virtual Switches input-dev after receiving a switch event\n");
+			ret = input_register_device(priv->switches_dev);
+			if (ret)
+				return;
+
+			priv->has_switches = true;
+		}
+		input_dev = priv->switches_dev;
+	} else {
+		dev_dbg(&device->dev, "unknown event index 0x%x\n", event);
+		return;
+	}
+
+	if (priv->wakeup_mode) {
+		pm_wakeup_hard_event(&device->dev);
+
+		/*
+		 * Skip reporting an evdev event for button wake events,
+		 * mirroring how the drivers/acpi/button.c code skips this too.
+		 */
+		if (ke->type == KE_KEY)
+			return;
+	}
+
+	/*
+	 * Even press events are autorelease if there is no corresponding odd
+	 * release event, or if the odd event is KE_IGNORE.
+	 */
+	ke_rel = sparse_keymap_entry_from_scancode(input_dev, event | 1);
+	autorelease = val && (!ke_rel || ke_rel->type == KE_IGNORE);
+
+	sparse_keymap_report_event(input_dev, event, val, autorelease);
+
+	/* Some devices need this to report further events */
+	acpi_evaluate_object(handle, "VBDL", NULL, NULL);
+}
+
+/*
+ * There are several laptops (non 2-in-1) models out there which support VGBS,
+ * but simply always return 0, which we translate to SW_TABLET_MODE=1. This in
+ * turn causes userspace (libinput) to suppress events from the builtin
+ * keyboard and touchpad, making the laptop essentially unusable.
+ *
+ * Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination
+ * with libinput, leads to a non-usable system. Where as OTOH many people will
+ * not even notice when SW_TABLET_MODE is not being reported, a DMI based allow
+ * list is used here. This list mainly matches on the chassis-type of 2-in-1s.
+ *
+ * There are also some 2-in-1s which use the intel-vbtn ACPI interface to report
+ * SW_TABLET_MODE with a chassis-type of 8 ("Portable") or 10 ("Notebook"),
+ * these are matched on a per model basis, since many normal laptops with a
+ * possible broken VGBS ACPI-method also use these chassis-types.
+ */
+static const struct dmi_system_id dmi_switches_allow_list[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */),
+		},
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7352"),
+		},
+	},
+	{} /* Array terminator */
+};
+
+static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel)
+{
+	unsigned long long vgbs;
+	acpi_status status;
+
+	/* See dual_accel_detect.h for more info */
+	if (dual_accel)
+		return false;
+
+	if (!dmi_check_system(dmi_switches_allow_list))
+		return false;
+
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
+	return ACPI_SUCCESS(status);
+}
+
+static int intel_vbtn_probe(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+	bool dual_accel, has_buttons, has_switches;
+	struct intel_vbtn_priv *priv;
+	acpi_status status;
+	int err;
+
+	dual_accel = dual_accel_detect();
+	has_buttons = acpi_has_method(handle, "VBDL");
+	has_switches = intel_vbtn_has_switches(handle, dual_accel);
+
+	if (!has_buttons && !has_switches) {
+		dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(&device->dev, priv);
+
+	priv->dual_accel = dual_accel;
+	priv->has_buttons = has_buttons;
+	priv->has_switches = has_switches;
+
+	err = intel_vbtn_input_setup(device);
+	if (err) {
+		pr_err("Failed to setup Intel Virtual Button\n");
+		return err;
+	}
+
+	status = acpi_install_notify_handler(handle,
+					     ACPI_DEVICE_NOTIFY,
+					     notify_handler,
+					     device);
+	if (ACPI_FAILURE(status))
+		return -EBUSY;
+
+	if (has_buttons) {
+		status = acpi_evaluate_object(handle, "VBDL", NULL, NULL);
+		if (ACPI_FAILURE(status))
+			dev_err(&device->dev, "Error VBDL failed with ACPI status %d\n", status);
+	}
+
+	device_init_wakeup(&device->dev, true);
+	/*
+	 * In order for system wakeup to work, the EC GPE has to be marked as
+	 * a wakeup one, so do that here (this setting will persist, but it has
+	 * no effect until the wakeup mask is set for the EC GPE).
+	 */
+	acpi_ec_mark_gpe_for_wake();
+	return 0;
+}
+
+static int intel_vbtn_remove(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+
+	device_init_wakeup(&device->dev, false);
+	acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler);
+
+	/*
+	 * Even if we failed to shut off the event stream, we can still
+	 * safely detach from the device.
+	 */
+	return 0;
+}
+
+static int intel_vbtn_pm_prepare(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+
+		priv->wakeup_mode = true;
+	}
+	return 0;
+}
+
+static void intel_vbtn_pm_complete(struct device *dev)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+
+	priv->wakeup_mode = false;
+}
+
+static int intel_vbtn_pm_resume(struct device *dev)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+
+	intel_vbtn_pm_complete(dev);
+
+	if (priv->has_switches)
+		detect_tablet_mode(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops intel_vbtn_pm_ops = {
+	.prepare = intel_vbtn_pm_prepare,
+	.complete = intel_vbtn_pm_complete,
+	.resume = intel_vbtn_pm_resume,
+	.restore = intel_vbtn_pm_resume,
+	.thaw = intel_vbtn_pm_resume,
+};
+
+static struct platform_driver intel_vbtn_pl_driver = {
+	.driver = {
+		.name = "intel-vbtn",
+		.acpi_match_table = intel_vbtn_ids,
+		.pm = &intel_vbtn_pm_ops,
+	},
+	.probe = intel_vbtn_probe,
+	.remove = intel_vbtn_remove,
+};
+
+static acpi_status __init
+check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	const struct acpi_device_id *ids = context;
+	struct acpi_device *dev = acpi_fetch_acpi_dev(handle);
+
+	if (dev && acpi_match_device_ids(dev, ids) == 0)
+		if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL)))
+			dev_info(&dev->dev,
+				 "intel-vbtn: created platform device\n");
+
+	return AE_OK;
+}
+
+static int __init intel_vbtn_init(void)
+{
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX, check_acpi_dev, NULL,
+			    (void *)intel_vbtn_ids, NULL);
+
+	return platform_driver_register(&intel_vbtn_pl_driver);
+}
+module_init(intel_vbtn_init);
+
+static void __exit intel_vbtn_exit(void)
+{
+	platform_driver_unregister(&intel_vbtn_pl_driver);
+}
+module_exit(intel_vbtn_exit);
diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c
new file mode 100644
index 000000000..40477d1d4
--- /dev/null
+++ b/drivers/platform/x86/intel/vsec.c
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Vendor Specific Extended Capabilities auxiliary bus driver
+ *
+ * Copyright (c) 2021, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Author: David E. Box <david.e.box@linux.intel.com>
+ *
+ * This driver discovers and creates auxiliary devices for Intel defined PCIe
+ * "Vendor Specific" and "Designated Vendor Specific" Extended Capabilities,
+ * VSEC and DVSEC respectively. The driver supports features on specific PCIe
+ * endpoints that exist primarily to expose them.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include "vsec.h"
+
+/* Intel DVSEC offsets */
+#define INTEL_DVSEC_ENTRIES		0xA
+#define INTEL_DVSEC_SIZE		0xB
+#define INTEL_DVSEC_TABLE		0xC
+#define INTEL_DVSEC_TABLE_BAR(x)	((x) & GENMASK(2, 0))
+#define INTEL_DVSEC_TABLE_OFFSET(x)	((x) & GENMASK(31, 3))
+#define TABLE_OFFSET_SHIFT		3
+#define PMT_XA_START			0
+#define PMT_XA_MAX			INT_MAX
+#define PMT_XA_LIMIT			XA_LIMIT(PMT_XA_START, PMT_XA_MAX)
+
+static DEFINE_IDA(intel_vsec_ida);
+static DEFINE_IDA(intel_vsec_sdsi_ida);
+static DEFINE_XARRAY_ALLOC(auxdev_array);
+
+/**
+ * struct intel_vsec_header - Common fields of Intel VSEC and DVSEC registers.
+ * @rev:         Revision ID of the VSEC/DVSEC register space
+ * @length:      Length of the VSEC/DVSEC register space
+ * @id:          ID of the feature
+ * @num_entries: Number of instances of the feature
+ * @entry_size:  Size of the discovery table for each feature
+ * @tbir:        BAR containing the discovery tables
+ * @offset:      BAR offset of start of the first discovery table
+ */
+struct intel_vsec_header {
+	u8	rev;
+	u16	length;
+	u16	id;
+	u8	num_entries;
+	u8	entry_size;
+	u8	tbir;
+	u32	offset;
+};
+
+enum intel_vsec_id {
+	VSEC_ID_TELEMETRY	= 2,
+	VSEC_ID_WATCHER		= 3,
+	VSEC_ID_CRASHLOG	= 4,
+	VSEC_ID_SDSI		= 65,
+};
+
+static enum intel_vsec_id intel_vsec_allow_list[] = {
+	VSEC_ID_TELEMETRY,
+	VSEC_ID_WATCHER,
+	VSEC_ID_CRASHLOG,
+	VSEC_ID_SDSI,
+};
+
+static const char *intel_vsec_name(enum intel_vsec_id id)
+{
+	switch (id) {
+	case VSEC_ID_TELEMETRY:
+		return "telemetry";
+
+	case VSEC_ID_WATCHER:
+		return "watcher";
+
+	case VSEC_ID_CRASHLOG:
+		return "crashlog";
+
+	case VSEC_ID_SDSI:
+		return "sdsi";
+
+	default:
+		return NULL;
+	}
+}
+
+static bool intel_vsec_allowed(u16 id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(intel_vsec_allow_list); i++)
+		if (intel_vsec_allow_list[i] == id)
+			return true;
+
+	return false;
+}
+
+static bool intel_vsec_disabled(u16 id, unsigned long quirks)
+{
+	switch (id) {
+	case VSEC_ID_WATCHER:
+		return !!(quirks & VSEC_QUIRK_NO_WATCHER);
+
+	case VSEC_ID_CRASHLOG:
+		return !!(quirks & VSEC_QUIRK_NO_CRASHLOG);
+
+	default:
+		return false;
+	}
+}
+
+static void intel_vsec_remove_aux(void *data)
+{
+	auxiliary_device_delete(data);
+	auxiliary_device_uninit(data);
+}
+
+static DEFINE_MUTEX(vsec_ida_lock);
+
+static void intel_vsec_dev_release(struct device *dev)
+{
+	struct intel_vsec_device *intel_vsec_dev = dev_to_ivdev(dev);
+
+	xa_erase(&auxdev_array, intel_vsec_dev->id);
+
+	mutex_lock(&vsec_ida_lock);
+	ida_free(intel_vsec_dev->ida, intel_vsec_dev->auxdev.id);
+	mutex_unlock(&vsec_ida_lock);
+
+	kfree(intel_vsec_dev->resource);
+	kfree(intel_vsec_dev);
+}
+
+int intel_vsec_add_aux(struct pci_dev *pdev, struct device *parent,
+		       struct intel_vsec_device *intel_vsec_dev,
+		       const char *name)
+{
+	struct auxiliary_device *auxdev = &intel_vsec_dev->auxdev;
+	int ret, id;
+
+	ret = xa_alloc(&auxdev_array, &intel_vsec_dev->id, intel_vsec_dev,
+		       PMT_XA_LIMIT, GFP_KERNEL);
+	if (ret < 0) {
+		kfree(intel_vsec_dev->resource);
+		kfree(intel_vsec_dev);
+		return ret;
+	}
+
+	mutex_lock(&vsec_ida_lock);
+	id = ida_alloc(intel_vsec_dev->ida, GFP_KERNEL);
+	mutex_unlock(&vsec_ida_lock);
+	if (id < 0) {
+		xa_erase(&auxdev_array, intel_vsec_dev->id);
+		kfree(intel_vsec_dev->resource);
+		kfree(intel_vsec_dev);
+		return id;
+	}
+
+	if (!parent)
+		parent = &pdev->dev;
+
+	auxdev->id = id;
+	auxdev->name = name;
+	auxdev->dev.parent = parent;
+	auxdev->dev.release = intel_vsec_dev_release;
+
+	ret = auxiliary_device_init(auxdev);
+	if (ret < 0) {
+		mutex_lock(&vsec_ida_lock);
+		ida_free(intel_vsec_dev->ida, auxdev->id);
+		mutex_unlock(&vsec_ida_lock);
+		kfree(intel_vsec_dev->resource);
+		kfree(intel_vsec_dev);
+		return ret;
+	}
+
+	ret = auxiliary_device_add(auxdev);
+	if (ret < 0) {
+		auxiliary_device_uninit(auxdev);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(parent, intel_vsec_remove_aux,
+				       auxdev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(intel_vsec_add_aux, INTEL_VSEC);
+
+static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *header,
+			      struct intel_vsec_platform_info *info)
+{
+	struct intel_vsec_device *intel_vsec_dev;
+	struct resource *res, *tmp;
+	unsigned long quirks = info->quirks;
+	int i;
+
+	if (!intel_vsec_allowed(header->id) || intel_vsec_disabled(header->id, quirks))
+		return -EINVAL;
+
+	if (!header->num_entries) {
+		dev_dbg(&pdev->dev, "Invalid 0 entry count for header id %d\n", header->id);
+		return -EINVAL;
+	}
+
+	if (!header->entry_size) {
+		dev_dbg(&pdev->dev, "Invalid 0 entry size for header id %d\n", header->id);
+		return -EINVAL;
+	}
+
+	intel_vsec_dev = kzalloc(sizeof(*intel_vsec_dev), GFP_KERNEL);
+	if (!intel_vsec_dev)
+		return -ENOMEM;
+
+	res = kcalloc(header->num_entries, sizeof(*res), GFP_KERNEL);
+	if (!res) {
+		kfree(intel_vsec_dev);
+		return -ENOMEM;
+	}
+
+	if (quirks & VSEC_QUIRK_TABLE_SHIFT)
+		header->offset >>= TABLE_OFFSET_SHIFT;
+
+	/*
+	 * The DVSEC/VSEC contains the starting offset and count for a block of
+	 * discovery tables. Create a resource array of these tables to the
+	 * auxiliary device driver.
+	 */
+	for (i = 0, tmp = res; i < header->num_entries; i++, tmp++) {
+		tmp->start = pdev->resource[header->tbir].start +
+			     header->offset + i * (header->entry_size * sizeof(u32));
+		tmp->end = tmp->start + (header->entry_size * sizeof(u32)) - 1;
+		tmp->flags = IORESOURCE_MEM;
+	}
+
+	intel_vsec_dev->pcidev = pdev;
+	intel_vsec_dev->resource = res;
+	intel_vsec_dev->num_resources = header->num_entries;
+	intel_vsec_dev->info = info;
+
+	if (header->id == VSEC_ID_SDSI)
+		intel_vsec_dev->ida = &intel_vsec_sdsi_ida;
+	else
+		intel_vsec_dev->ida = &intel_vsec_ida;
+
+	return intel_vsec_add_aux(pdev, NULL, intel_vsec_dev,
+				  intel_vsec_name(header->id));
+}
+
+static bool intel_vsec_walk_header(struct pci_dev *pdev,
+				   struct intel_vsec_platform_info *info)
+{
+	struct intel_vsec_header **header = info->capabilities;
+	bool have_devices = false;
+	int ret;
+
+	for ( ; *header; header++) {
+		ret = intel_vsec_add_dev(pdev, *header, info);
+		if (ret)
+			dev_info(&pdev->dev, "Could not add device for DVSEC id %d\n",
+				 (*header)->id);
+		else
+			have_devices = true;
+	}
+
+	return have_devices;
+}
+
+static bool intel_vsec_walk_dvsec(struct pci_dev *pdev,
+				  struct intel_vsec_platform_info *info)
+{
+	bool have_devices = false;
+	int pos = 0;
+
+	do {
+		struct intel_vsec_header header;
+		u32 table, hdr;
+		u16 vid;
+		int ret;
+
+		pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_DVSEC);
+		if (!pos)
+			break;
+
+		pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER1, &hdr);
+		vid = PCI_DVSEC_HEADER1_VID(hdr);
+		if (vid != PCI_VENDOR_ID_INTEL)
+			continue;
+
+		/* Support only revision 1 */
+		header.rev = PCI_DVSEC_HEADER1_REV(hdr);
+		if (header.rev != 1) {
+			dev_info(&pdev->dev, "Unsupported DVSEC revision %d\n", header.rev);
+			continue;
+		}
+
+		header.length = PCI_DVSEC_HEADER1_LEN(hdr);
+
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES, &header.num_entries);
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE, &header.entry_size);
+		pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE, &table);
+
+		header.tbir = INTEL_DVSEC_TABLE_BAR(table);
+		header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
+
+		pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER2, &hdr);
+		header.id = PCI_DVSEC_HEADER2_ID(hdr);
+
+		ret = intel_vsec_add_dev(pdev, &header, info);
+		if (ret)
+			continue;
+
+		have_devices = true;
+	} while (true);
+
+	return have_devices;
+}
+
+static bool intel_vsec_walk_vsec(struct pci_dev *pdev,
+				 struct intel_vsec_platform_info *info)
+{
+	bool have_devices = false;
+	int pos = 0;
+
+	do {
+		struct intel_vsec_header header;
+		u32 table, hdr;
+		int ret;
+
+		pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_VNDR);
+		if (!pos)
+			break;
+
+		pci_read_config_dword(pdev, pos + PCI_VNDR_HEADER, &hdr);
+
+		/* Support only revision 1 */
+		header.rev = PCI_VNDR_HEADER_REV(hdr);
+		if (header.rev != 1) {
+			dev_info(&pdev->dev, "Unsupported VSEC revision %d\n", header.rev);
+			continue;
+		}
+
+		header.id = PCI_VNDR_HEADER_ID(hdr);
+		header.length = PCI_VNDR_HEADER_LEN(hdr);
+
+		/* entry, size, and table offset are the same as DVSEC */
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES, &header.num_entries);
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE, &header.entry_size);
+		pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE, &table);
+
+		header.tbir = INTEL_DVSEC_TABLE_BAR(table);
+		header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
+
+		ret = intel_vsec_add_dev(pdev, &header, info);
+		if (ret)
+			continue;
+
+		have_devices = true;
+	} while (true);
+
+	return have_devices;
+}
+
+static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct intel_vsec_platform_info *info;
+	bool have_devices = false;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	pci_save_state(pdev);
+	info = (struct intel_vsec_platform_info *)id->driver_data;
+	if (!info)
+		return -EINVAL;
+
+	if (intel_vsec_walk_dvsec(pdev, info))
+		have_devices = true;
+
+	if (intel_vsec_walk_vsec(pdev, info))
+		have_devices = true;
+
+	if (info && (info->quirks & VSEC_QUIRK_NO_DVSEC) &&
+	    intel_vsec_walk_header(pdev, info))
+		have_devices = true;
+
+	if (!have_devices)
+		return -ENODEV;
+
+	return 0;
+}
+
+/* TGL info */
+static const struct intel_vsec_platform_info tgl_info = {
+	.quirks = VSEC_QUIRK_NO_WATCHER | VSEC_QUIRK_NO_CRASHLOG |
+		  VSEC_QUIRK_TABLE_SHIFT | VSEC_QUIRK_EARLY_HW,
+};
+
+/* DG1 info */
+static struct intel_vsec_header dg1_telemetry = {
+	.length = 0x10,
+	.id = 2,
+	.num_entries = 1,
+	.entry_size = 3,
+	.tbir = 0,
+	.offset = 0x466000,
+};
+
+static struct intel_vsec_header *dg1_capabilities[] = {
+	&dg1_telemetry,
+	NULL
+};
+
+static const struct intel_vsec_platform_info dg1_info = {
+	.capabilities = dg1_capabilities,
+	.quirks = VSEC_QUIRK_NO_DVSEC | VSEC_QUIRK_EARLY_HW,
+};
+
+#define PCI_DEVICE_ID_INTEL_VSEC_ADL		0x467d
+#define PCI_DEVICE_ID_INTEL_VSEC_DG1		0x490e
+#define PCI_DEVICE_ID_INTEL_VSEC_OOBMSM		0x09a7
+#define PCI_DEVICE_ID_INTEL_VSEC_RPL		0xa77d
+#define PCI_DEVICE_ID_INTEL_VSEC_TGL		0x9a0d
+static const struct pci_device_id intel_vsec_pci_ids[] = {
+	{ PCI_DEVICE_DATA(INTEL, VSEC_ADL, &tgl_info) },
+	{ PCI_DEVICE_DATA(INTEL, VSEC_DG1, &dg1_info) },
+	{ PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, &(struct intel_vsec_platform_info) {}) },
+	{ PCI_DEVICE_DATA(INTEL, VSEC_RPL, &tgl_info) },
+	{ PCI_DEVICE_DATA(INTEL, VSEC_TGL, &tgl_info) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, intel_vsec_pci_ids);
+
+static pci_ers_result_t intel_vsec_pci_error_detected(struct pci_dev *pdev,
+						      pci_channel_state_t state)
+{
+	pci_ers_result_t status = PCI_ERS_RESULT_NEED_RESET;
+
+	dev_info(&pdev->dev, "PCI error detected, state %d", state);
+
+	if (state == pci_channel_io_perm_failure)
+		status = PCI_ERS_RESULT_DISCONNECT;
+	else
+		pci_disable_device(pdev);
+
+	return status;
+}
+
+static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct intel_vsec_device *intel_vsec_dev;
+	pci_ers_result_t status = PCI_ERS_RESULT_DISCONNECT;
+	const struct pci_device_id *pci_dev_id;
+	unsigned long index;
+
+	dev_info(&pdev->dev, "Resetting PCI slot\n");
+
+	msleep(2000);
+	if (pci_enable_device(pdev)) {
+		dev_info(&pdev->dev,
+			 "Failed to re-enable PCI device after reset.\n");
+		goto out;
+	}
+
+	status = PCI_ERS_RESULT_RECOVERED;
+
+	xa_for_each(&auxdev_array, index, intel_vsec_dev) {
+		/* check if pdev doesn't match */
+		if (pdev != intel_vsec_dev->pcidev)
+			continue;
+		devm_release_action(&pdev->dev, intel_vsec_remove_aux,
+				    &intel_vsec_dev->auxdev);
+	}
+	pci_disable_device(pdev);
+	pci_restore_state(pdev);
+	pci_dev_id = pci_match_id(intel_vsec_pci_ids, pdev);
+	intel_vsec_pci_probe(pdev, pci_dev_id);
+
+out:
+	return status;
+}
+
+static void intel_vsec_pci_resume(struct pci_dev *pdev)
+{
+	dev_info(&pdev->dev, "Done resuming PCI device\n");
+}
+
+static const struct pci_error_handlers intel_vsec_pci_err_handlers = {
+	.error_detected = intel_vsec_pci_error_detected,
+	.slot_reset = intel_vsec_pci_slot_reset,
+	.resume = intel_vsec_pci_resume,
+};
+
+static struct pci_driver intel_vsec_pci_driver = {
+	.name = "intel_vsec",
+	.id_table = intel_vsec_pci_ids,
+	.probe = intel_vsec_pci_probe,
+	.err_handler = &intel_vsec_pci_err_handlers,
+};
+module_pci_driver(intel_vsec_pci_driver);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("Intel Extended Capabilities auxiliary bus driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/vsec.h b/drivers/platform/x86/intel/vsec.h
new file mode 100644
index 000000000..330672588
--- /dev/null
+++ b/drivers/platform/x86/intel/vsec.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _VSEC_H
+#define _VSEC_H
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bits.h>
+
+struct pci_dev;
+struct resource;
+
+enum intel_vsec_quirks {
+	/* Watcher feature not supported */
+	VSEC_QUIRK_NO_WATCHER	= BIT(0),
+
+	/* Crashlog feature not supported */
+	VSEC_QUIRK_NO_CRASHLOG	= BIT(1),
+
+	/* Use shift instead of mask to read discovery table offset */
+	VSEC_QUIRK_TABLE_SHIFT	= BIT(2),
+
+	/* DVSEC not present (provided in driver data) */
+	VSEC_QUIRK_NO_DVSEC	= BIT(3),
+
+	/* Platforms requiring quirk in the auxiliary driver */
+	VSEC_QUIRK_EARLY_HW     = BIT(4),
+};
+
+/* Platform specific data */
+struct intel_vsec_platform_info {
+	struct intel_vsec_header **capabilities;
+	unsigned long quirks;
+};
+
+struct intel_vsec_device {
+	struct auxiliary_device auxdev;
+	struct pci_dev *pcidev;
+	struct resource *resource;
+	struct ida *ida;
+	struct intel_vsec_platform_info *info;
+	int num_resources;
+	int id; /* xa */
+	void *priv_data;
+	size_t priv_data_size;
+};
+
+int intel_vsec_add_aux(struct pci_dev *pdev, struct device *parent,
+		       struct intel_vsec_device *intel_vsec_dev,
+		       const char *name);
+
+static inline struct intel_vsec_device *dev_to_ivdev(struct device *dev)
+{
+	return container_of(dev, struct intel_vsec_device, auxdev.dev);
+}
+
+static inline struct intel_vsec_device *auxdev_to_ivdev(struct auxiliary_device *auxdev)
+{
+	return container_of(auxdev, struct intel_vsec_device, auxdev);
+}
+#endif
diff --git a/drivers/platform/x86/intel/wmi/Kconfig b/drivers/platform/x86/intel/wmi/Kconfig
new file mode 100644
index 000000000..8e159f712
--- /dev/null
+++ b/drivers/platform/x86/intel/wmi/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+config INTEL_WMI
+	bool
+
+config INTEL_WMI_SBL_FW_UPDATE
+	tristate "Intel WMI Slim Bootloader firmware update signaling driver"
+	depends on ACPI_WMI
+	select INTEL_WMI
+	help
+	  Say Y here if you want to be able to use the WMI interface to signal
+	  Slim Bootloader to trigger update on next reboot.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel-wmi-sbl-fw-update.
+
+config INTEL_WMI_THUNDERBOLT
+	tristate "Intel WMI thunderbolt force power driver"
+	depends on ACPI_WMI
+	select INTEL_WMI
+	help
+	  Say Y here if you want to be able to use the WMI interface on select
+	  systems to force the power control of Intel Thunderbolt controllers.
+	  This is useful for updating the firmware when devices are not plugged
+	  into the controller.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel-wmi-thunderbolt.
diff --git a/drivers/platform/x86/intel/wmi/Makefile b/drivers/platform/x86/intel/wmi/Makefile
new file mode 100644
index 000000000..c2d56d25d
--- /dev/null
+++ b/drivers/platform/x86/intel/wmi/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+intel-wmi-sbl-fw-update-y				:= sbl-fw-update.o
+obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE)	+= intel-wmi-sbl-fw-update.o
+intel-wmi-thunderbolt-y					:= thunderbolt.o
+obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
diff --git a/drivers/platform/x86/intel/wmi/sbl-fw-update.c b/drivers/platform/x86/intel/wmi/sbl-fw-update.c
new file mode 100644
index 000000000..3c86e0108
--- /dev/null
+++ b/drivers/platform/x86/intel/wmi/sbl-fw-update.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Slim Bootloader(SBL) firmware update signaling driver
+ *
+ * Slim Bootloader is a small, open-source, non UEFI compliant, boot firmware
+ * optimized for running on certain Intel platforms.
+ *
+ * SBL exposes an ACPI-WMI device via /sys/bus/wmi/devices/<INTEL_WMI_SBL_GUID>.
+ * This driver further adds "firmware_update_request" device attribute.
+ * This attribute normally has a value of 0 and userspace can signal SBL
+ * to update firmware, on next reboot, by writing a value of 1.
+ *
+ * More details of SBL firmware update process is available at:
+ * https://slimbootloader.github.io/security/firmware-update.html
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/wmi.h>
+
+#define INTEL_WMI_SBL_GUID  "44FADEB1-B204-40F2-8581-394BBDC1B651"
+
+static int get_fwu_request(struct device *dev, u32 *out)
+{
+	struct acpi_buffer result = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *obj;
+	acpi_status status;
+
+	status = wmi_query_block(INTEL_WMI_SBL_GUID, 0, &result);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "wmi_query_block failed\n");
+		return -ENODEV;
+	}
+
+	obj = (union acpi_object *)result.pointer;
+	if (!obj || obj->type != ACPI_TYPE_INTEGER) {
+		dev_warn(dev, "wmi_query_block returned invalid value\n");
+		kfree(obj);
+		return -EINVAL;
+	}
+
+	*out = obj->integer.value;
+	kfree(obj);
+
+	return 0;
+}
+
+static int set_fwu_request(struct device *dev, u32 in)
+{
+	struct acpi_buffer input;
+	acpi_status status;
+	u32 value;
+
+	value = in;
+	input.length = sizeof(u32);
+	input.pointer = &value;
+
+	status = wmi_set_block(INTEL_WMI_SBL_GUID, 0, &input);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "wmi_set_block failed\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static ssize_t firmware_update_request_show(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	u32 val;
+	int ret;
+
+	ret = get_fwu_request(dev, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t firmware_update_request_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/* May later be extended to support values other than 0 and 1 */
+	if (val > 1)
+		return -ERANGE;
+
+	ret = set_fwu_request(dev, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_RW(firmware_update_request);
+
+static struct attribute *firmware_update_attrs[] = {
+	&dev_attr_firmware_update_request.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(firmware_update);
+
+static int intel_wmi_sbl_fw_update_probe(struct wmi_device *wdev,
+					 const void *context)
+{
+	dev_info(&wdev->dev, "Slim Bootloader signaling driver attached\n");
+	return 0;
+}
+
+static void intel_wmi_sbl_fw_update_remove(struct wmi_device *wdev)
+{
+	dev_info(&wdev->dev, "Slim Bootloader signaling driver removed\n");
+}
+
+static const struct wmi_device_id intel_wmi_sbl_id_table[] = {
+	{ .guid_string = INTEL_WMI_SBL_GUID },
+	{}
+};
+MODULE_DEVICE_TABLE(wmi, intel_wmi_sbl_id_table);
+
+static struct wmi_driver intel_wmi_sbl_fw_update_driver = {
+	.driver = {
+		.name = "intel-wmi-sbl-fw-update",
+		.dev_groups = firmware_update_groups,
+	},
+	.probe = intel_wmi_sbl_fw_update_probe,
+	.remove = intel_wmi_sbl_fw_update_remove,
+	.id_table = intel_wmi_sbl_id_table,
+};
+module_wmi_driver(intel_wmi_sbl_fw_update_driver);
+
+MODULE_AUTHOR("Jithu Joseph <jithu.joseph@intel.com>");
+MODULE_DESCRIPTION("Slim Bootloader firmware update signaling driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel/wmi/thunderbolt.c b/drivers/platform/x86/intel/wmi/thunderbolt.c
new file mode 100644
index 000000000..fc333ff82
--- /dev/null
+++ b/drivers/platform/x86/intel/wmi/thunderbolt.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * WMI Thunderbolt driver
+ *
+ * Copyright (C) 2017 Dell Inc. All Rights Reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/wmi.h>
+
+#define INTEL_WMI_THUNDERBOLT_GUID "86CCFD48-205E-4A77-9C48-2021CBEDE341"
+
+static ssize_t force_power_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct acpi_buffer input;
+	acpi_status status;
+	u8 mode;
+
+	input.length = sizeof(u8);
+	input.pointer = &mode;
+	mode = hex_to_bin(buf[0]);
+	dev_dbg(dev, "force_power: storing %#x\n", mode);
+	if (mode == 0 || mode == 1) {
+		status = wmi_evaluate_method(INTEL_WMI_THUNDERBOLT_GUID, 0, 1,
+					     &input, NULL);
+		if (ACPI_FAILURE(status)) {
+			dev_dbg(dev, "force_power: failed to evaluate ACPI method\n");
+			return -ENODEV;
+		}
+	} else {
+		dev_dbg(dev, "force_power: unsupported mode\n");
+		return -EINVAL;
+	}
+	return count;
+}
+
+static DEVICE_ATTR_WO(force_power);
+
+static struct attribute *tbt_attrs[] = {
+	&dev_attr_force_power.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(tbt);
+
+static const struct wmi_device_id intel_wmi_thunderbolt_id_table[] = {
+	{ .guid_string = INTEL_WMI_THUNDERBOLT_GUID },
+	{ },
+};
+
+static struct wmi_driver intel_wmi_thunderbolt_driver = {
+	.driver = {
+		.name = "intel-wmi-thunderbolt",
+		.dev_groups = tbt_groups,
+	},
+	.id_table = intel_wmi_thunderbolt_id_table,
+};
+
+module_wmi_driver(intel_wmi_thunderbolt_driver);
+
+MODULE_DEVICE_TABLE(wmi, intel_wmi_thunderbolt_id_table);
+MODULE_AUTHOR("Mario Limonciello <mario.limonciello@dell.com>");
+MODULE_DESCRIPTION("Intel WMI Thunderbolt force power driver");
+MODULE_LICENSE("GPL v2");