Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1658 insertions, 0 deletions

diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
new file mode 100644
index 000000000..b4aa8ba35
--- /dev/null
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -0,0 +1,1658 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung Laptop driver
+ *
+ * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de)
+ * Copyright (C) 2009,2011 Novell Inc.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/fb.h>
+#include <linux/dmi.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/acpi.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/ctype.h>
+#include <linux/efi.h>
+#include <linux/suspend.h>
+#include <acpi/video.h>
+
+/*
+ * This driver is needed because a number of Samsung laptops do not hook
+ * their control settings through ACPI.  So we have to poke around in the
+ * BIOS to do things like brightness values, and "special" key controls.
+ */
+
+/*
+ * We have 0 - 8 as valid brightness levels.  The specs say that level 0 should
+ * be reserved by the BIOS (which really doesn't make much sense), we tell
+ * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
+ */
+#define MAX_BRIGHT	0x07
+
+
+#define SABI_IFACE_MAIN			0x00
+#define SABI_IFACE_SUB			0x02
+#define SABI_IFACE_COMPLETE		0x04
+#define SABI_IFACE_DATA			0x05
+
+#define WL_STATUS_WLAN			0x0
+#define WL_STATUS_BT			0x2
+
+/* Structure get/set data using sabi */
+struct sabi_data {
+	union {
+		struct {
+			u32 d0;
+			u32 d1;
+			u16 d2;
+			u8  d3;
+		};
+		u8 data[11];
+	};
+};
+
+struct sabi_header_offsets {
+	u8 port;
+	u8 re_mem;
+	u8 iface_func;
+	u8 en_mem;
+	u8 data_offset;
+	u8 data_segment;
+};
+
+struct sabi_commands {
+	/*
+	 * Brightness is 0 - 8, as described above.
+	 * Value 0 is for the BIOS to use
+	 */
+	u16 get_brightness;
+	u16 set_brightness;
+
+	/*
+	 * first byte:
+	 * 0x00 - wireless is off
+	 * 0x01 - wireless is on
+	 * second byte:
+	 * 0x02 - 3G is off
+	 * 0x03 - 3G is on
+	 * TODO, verify 3G is correct, that doesn't seem right...
+	 */
+	u16 get_wireless_button;
+	u16 set_wireless_button;
+
+	/* 0 is off, 1 is on */
+	u16 get_backlight;
+	u16 set_backlight;
+
+	/*
+	 * 0x80 or 0x00 - no action
+	 * 0x81 - recovery key pressed
+	 */
+	u16 get_recovery_mode;
+	u16 set_recovery_mode;
+
+	/*
+	 * on seclinux: 0 is low, 1 is high,
+	 * on swsmi: 0 is normal, 1 is silent, 2 is turbo
+	 */
+	u16 get_performance_level;
+	u16 set_performance_level;
+
+	/* 0x80 is off, 0x81 is on */
+	u16 get_battery_life_extender;
+	u16 set_battery_life_extender;
+
+	/* 0x80 is off, 0x81 is on */
+	u16 get_usb_charge;
+	u16 set_usb_charge;
+
+	/* the first byte is for bluetooth and the third one is for wlan */
+	u16 get_wireless_status;
+	u16 set_wireless_status;
+
+	/* 0x80 is off, 0x81 is on */
+	u16 get_lid_handling;
+	u16 set_lid_handling;
+
+	/* 0x81 to read, (0x82 | level << 8) to set, 0xaabb to enable */
+	u16 kbd_backlight;
+
+	/*
+	 * Tell the BIOS that Linux is running on this machine.
+	 * 81 is on, 80 is off
+	 */
+	u16 set_linux;
+};
+
+struct sabi_performance_level {
+	const char *name;
+	u16 value;
+};
+
+struct sabi_config {
+	int sabi_version;
+	const char *test_string;
+	u16 main_function;
+	const struct sabi_header_offsets header_offsets;
+	const struct sabi_commands commands;
+	const struct sabi_performance_level performance_levels[4];
+	u8 min_brightness;
+	u8 max_brightness;
+};
+
+static const struct sabi_config sabi_configs[] = {
+	{
+		/* I don't know if it is really 2, but it is
+		 * less than 3 anyway */
+		.sabi_version = 2,
+
+		.test_string = "SECLINUX",
+
+		.main_function = 0x4c49,
+
+		.header_offsets = {
+			.port = 0x00,
+			.re_mem = 0x02,
+			.iface_func = 0x03,
+			.en_mem = 0x04,
+			.data_offset = 0x05,
+			.data_segment = 0x07,
+		},
+
+		.commands = {
+			.get_brightness = 0x00,
+			.set_brightness = 0x01,
+
+			.get_wireless_button = 0x02,
+			.set_wireless_button = 0x03,
+
+			.get_backlight = 0x04,
+			.set_backlight = 0x05,
+
+			.get_recovery_mode = 0x06,
+			.set_recovery_mode = 0x07,
+
+			.get_performance_level = 0x08,
+			.set_performance_level = 0x09,
+
+			.get_battery_life_extender = 0xFFFF,
+			.set_battery_life_extender = 0xFFFF,
+
+			.get_usb_charge = 0xFFFF,
+			.set_usb_charge = 0xFFFF,
+
+			.get_wireless_status = 0xFFFF,
+			.set_wireless_status = 0xFFFF,
+
+			.get_lid_handling = 0xFFFF,
+			.set_lid_handling = 0xFFFF,
+
+			.kbd_backlight = 0xFFFF,
+
+			.set_linux = 0x0a,
+		},
+
+		.performance_levels = {
+			{
+				.name = "silent",
+				.value = 0,
+			},
+			{
+				.name = "normal",
+				.value = 1,
+			},
+			{ },
+		},
+		.min_brightness = 1,
+		.max_brightness = 8,
+	},
+	{
+		.sabi_version = 3,
+
+		.test_string = "SwSmi@",
+
+		.main_function = 0x5843,
+
+		.header_offsets = {
+			.port = 0x00,
+			.re_mem = 0x04,
+			.iface_func = 0x02,
+			.en_mem = 0x03,
+			.data_offset = 0x05,
+			.data_segment = 0x07,
+		},
+
+		.commands = {
+			.get_brightness = 0x10,
+			.set_brightness = 0x11,
+
+			.get_wireless_button = 0x12,
+			.set_wireless_button = 0x13,
+
+			.get_backlight = 0x2d,
+			.set_backlight = 0x2e,
+
+			.get_recovery_mode = 0xff,
+			.set_recovery_mode = 0xff,
+
+			.get_performance_level = 0x31,
+			.set_performance_level = 0x32,
+
+			.get_battery_life_extender = 0x65,
+			.set_battery_life_extender = 0x66,
+
+			.get_usb_charge = 0x67,
+			.set_usb_charge = 0x68,
+
+			.get_wireless_status = 0x69,
+			.set_wireless_status = 0x6a,
+
+			.get_lid_handling = 0x6d,
+			.set_lid_handling = 0x6e,
+
+			.kbd_backlight = 0x78,
+
+			.set_linux = 0xff,
+		},
+
+		.performance_levels = {
+			{
+				.name = "normal",
+				.value = 0,
+			},
+			{
+				.name = "silent",
+				.value = 1,
+			},
+			{
+				.name = "overclock",
+				.value = 2,
+			},
+			{ },
+		},
+		.min_brightness = 0,
+		.max_brightness = 8,
+	},
+	{ },
+};
+
+/*
+ * samsung-laptop/    - debugfs root directory
+ *   f0000_segment    - dump f0000 segment
+ *   command          - current command
+ *   data             - current data
+ *   d0, d1, d2, d3   - data fields
+ *   call             - call SABI using command and data
+ *
+ * This allow to call arbitrary sabi commands wihout
+ * modifying the driver at all.
+ * For example, setting the keyboard backlight brightness to 5
+ *
+ *  echo 0x78 > command
+ *  echo 0x0582 > d0
+ *  echo 0 > d1
+ *  echo 0 > d2
+ *  echo 0 > d3
+ *  cat call
+ */
+
+struct samsung_laptop_debug {
+	struct dentry *root;
+	struct sabi_data data;
+	u16 command;
+
+	struct debugfs_blob_wrapper f0000_wrapper;
+	struct debugfs_blob_wrapper data_wrapper;
+	struct debugfs_blob_wrapper sdiag_wrapper;
+};
+
+struct samsung_laptop;
+
+struct samsung_rfkill {
+	struct samsung_laptop *samsung;
+	struct rfkill *rfkill;
+	enum rfkill_type type;
+};
+
+struct samsung_laptop {
+	const struct sabi_config *config;
+
+	void __iomem *sabi;
+	void __iomem *sabi_iface;
+	void __iomem *f0000_segment;
+
+	struct mutex sabi_mutex;
+
+	struct platform_device *platform_device;
+	struct backlight_device *backlight_device;
+
+	struct samsung_rfkill wlan;
+	struct samsung_rfkill bluetooth;
+
+	struct led_classdev kbd_led;
+	int kbd_led_wk;
+	struct workqueue_struct *led_workqueue;
+	struct work_struct kbd_led_work;
+
+	struct samsung_laptop_debug debug;
+	struct samsung_quirks *quirks;
+
+	struct notifier_block pm_nb;
+
+	bool handle_backlight;
+	bool has_stepping_quirk;
+
+	char sdiag[64];
+};
+
+struct samsung_quirks {
+	bool four_kbd_backlight_levels;
+	bool enable_kbd_backlight;
+	bool lid_handling;
+};
+
+static struct samsung_quirks samsung_unknown = {};
+
+static struct samsung_quirks samsung_np740u3e = {
+	.four_kbd_backlight_levels = true,
+	.enable_kbd_backlight = true,
+};
+
+static struct samsung_quirks samsung_lid_handling = {
+	.lid_handling = true,
+};
+
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force,
+		"Disable the DMI check and forces the driver to be loaded");
+
+static bool debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+static int sabi_command(struct samsung_laptop *samsung, u16 command,
+			struct sabi_data *in,
+			struct sabi_data *out)
+{
+	const struct sabi_config *config = samsung->config;
+	int ret = 0;
+	u16 port = readw(samsung->sabi + config->header_offsets.port);
+	u8 complete, iface_data;
+
+	mutex_lock(&samsung->sabi_mutex);
+
+	if (debug) {
+		if (in)
+			pr_info("SABI command:0x%04x "
+				"data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}",
+				command, in->d0, in->d1, in->d2, in->d3);
+		else
+			pr_info("SABI command:0x%04x", command);
+	}
+
+	/* enable memory to be able to write to it */
+	outb(readb(samsung->sabi + config->header_offsets.en_mem), port);
+
+	/* write out the command */
+	writew(config->main_function, samsung->sabi_iface + SABI_IFACE_MAIN);
+	writew(command, samsung->sabi_iface + SABI_IFACE_SUB);
+	writeb(0, samsung->sabi_iface + SABI_IFACE_COMPLETE);
+	if (in) {
+		writel(in->d0, samsung->sabi_iface + SABI_IFACE_DATA);
+		writel(in->d1, samsung->sabi_iface + SABI_IFACE_DATA + 4);
+		writew(in->d2, samsung->sabi_iface + SABI_IFACE_DATA + 8);
+		writeb(in->d3, samsung->sabi_iface + SABI_IFACE_DATA + 10);
+	}
+	outb(readb(samsung->sabi + config->header_offsets.iface_func), port);
+
+	/* write protect memory to make it safe */
+	outb(readb(samsung->sabi + config->header_offsets.re_mem), port);
+
+	/* see if the command actually succeeded */
+	complete = readb(samsung->sabi_iface + SABI_IFACE_COMPLETE);
+	iface_data = readb(samsung->sabi_iface + SABI_IFACE_DATA);
+
+	/* iface_data = 0xFF happens when a command is not known
+	 * so we only add a warning in debug mode since we will
+	 * probably issue some unknown command at startup to find
+	 * out which features are supported */
+	if (complete != 0xaa || (iface_data == 0xff && debug))
+		pr_warn("SABI command 0x%04x failed with"
+			" completion flag 0x%02x and interface data 0x%02x",
+			command, complete, iface_data);
+
+	if (complete != 0xaa || iface_data == 0xff) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (out) {
+		out->d0 = readl(samsung->sabi_iface + SABI_IFACE_DATA);
+		out->d1 = readl(samsung->sabi_iface + SABI_IFACE_DATA + 4);
+		out->d2 = readw(samsung->sabi_iface + SABI_IFACE_DATA + 2);
+		out->d3 = readb(samsung->sabi_iface + SABI_IFACE_DATA + 1);
+	}
+
+	if (debug && out) {
+		pr_info("SABI return data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}",
+			out->d0, out->d1, out->d2, out->d3);
+	}
+
+exit:
+	mutex_unlock(&samsung->sabi_mutex);
+	return ret;
+}
+
+/* simple wrappers usable with most commands */
+static int sabi_set_commandb(struct samsung_laptop *samsung,
+			     u16 command, u8 data)
+{
+	struct sabi_data in = { { { .d0 = 0, .d1 = 0, .d2 = 0, .d3 = 0 } } };
+
+	in.data[0] = data;
+	return sabi_command(samsung, command, &in, NULL);
+}
+
+static int read_brightness(struct samsung_laptop *samsung)
+{
+	const struct sabi_config *config = samsung->config;
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data sretval;
+	int user_brightness = 0;
+	int retval;
+
+	retval = sabi_command(samsung, commands->get_brightness,
+			      NULL, &sretval);
+	if (retval)
+		return retval;
+
+	user_brightness = sretval.data[0];
+	if (user_brightness > config->min_brightness)
+		user_brightness -= config->min_brightness;
+	else
+		user_brightness = 0;
+
+	return user_brightness;
+}
+
+static void set_brightness(struct samsung_laptop *samsung, u8 user_brightness)
+{
+	const struct sabi_config *config = samsung->config;
+	const struct sabi_commands *commands = &samsung->config->commands;
+	u8 user_level = user_brightness + config->min_brightness;
+
+	if (samsung->has_stepping_quirk && user_level != 0) {
+		/*
+		 * short circuit if the specified level is what's already set
+		 * to prevent the screen from flickering needlessly
+		 */
+		if (user_brightness == read_brightness(samsung))
+			return;
+
+		sabi_set_commandb(samsung, commands->set_brightness, 0);
+	}
+
+	sabi_set_commandb(samsung, commands->set_brightness, user_level);
+}
+
+static int get_brightness(struct backlight_device *bd)
+{
+	struct samsung_laptop *samsung = bl_get_data(bd);
+
+	return read_brightness(samsung);
+}
+
+static void check_for_stepping_quirk(struct samsung_laptop *samsung)
+{
+	int initial_level;
+	int check_level;
+	int orig_level = read_brightness(samsung);
+
+	/*
+	 * Some laptops exhibit the strange behaviour of stepping toward
+	 * (rather than setting) the brightness except when changing to/from
+	 * brightness level 0. This behaviour is checked for here and worked
+	 * around in set_brightness.
+	 */
+
+	if (orig_level == 0)
+		set_brightness(samsung, 1);
+
+	initial_level = read_brightness(samsung);
+
+	if (initial_level <= 2)
+		check_level = initial_level + 2;
+	else
+		check_level = initial_level - 2;
+
+	samsung->has_stepping_quirk = false;
+	set_brightness(samsung, check_level);
+
+	if (read_brightness(samsung) != check_level) {
+		samsung->has_stepping_quirk = true;
+		pr_info("enabled workaround for brightness stepping quirk\n");
+	}
+
+	set_brightness(samsung, orig_level);
+}
+
+static int update_status(struct backlight_device *bd)
+{
+	struct samsung_laptop *samsung = bl_get_data(bd);
+	const struct sabi_commands *commands = &samsung->config->commands;
+
+	set_brightness(samsung, bd->props.brightness);
+
+	if (bd->props.power == FB_BLANK_UNBLANK)
+		sabi_set_commandb(samsung, commands->set_backlight, 1);
+	else
+		sabi_set_commandb(samsung, commands->set_backlight, 0);
+
+	return 0;
+}
+
+static const struct backlight_ops backlight_ops = {
+	.get_brightness	= get_brightness,
+	.update_status	= update_status,
+};
+
+static int seclinux_rfkill_set(void *data, bool blocked)
+{
+	struct samsung_rfkill *srfkill = data;
+	struct samsung_laptop *samsung = srfkill->samsung;
+	const struct sabi_commands *commands = &samsung->config->commands;
+
+	return sabi_set_commandb(samsung, commands->set_wireless_button,
+				 !blocked);
+}
+
+static const struct rfkill_ops seclinux_rfkill_ops = {
+	.set_block = seclinux_rfkill_set,
+};
+
+static int swsmi_wireless_status(struct samsung_laptop *samsung,
+				 struct sabi_data *data)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+
+	return sabi_command(samsung, commands->get_wireless_status,
+			    NULL, data);
+}
+
+static int swsmi_rfkill_set(void *priv, bool blocked)
+{
+	struct samsung_rfkill *srfkill = priv;
+	struct samsung_laptop *samsung = srfkill->samsung;
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+	int ret, i;
+
+	ret = swsmi_wireless_status(samsung, &data);
+	if (ret)
+		return ret;
+
+	/* Don't set the state for non-present devices */
+	for (i = 0; i < 4; i++)
+		if (data.data[i] == 0x02)
+			data.data[1] = 0;
+
+	if (srfkill->type == RFKILL_TYPE_WLAN)
+		data.data[WL_STATUS_WLAN] = !blocked;
+	else if (srfkill->type == RFKILL_TYPE_BLUETOOTH)
+		data.data[WL_STATUS_BT] = !blocked;
+
+	return sabi_command(samsung, commands->set_wireless_status,
+			    &data, &data);
+}
+
+static void swsmi_rfkill_query(struct rfkill *rfkill, void *priv)
+{
+	struct samsung_rfkill *srfkill = priv;
+	struct samsung_laptop *samsung = srfkill->samsung;
+	struct sabi_data data;
+	int ret;
+
+	ret = swsmi_wireless_status(samsung, &data);
+	if (ret)
+		return ;
+
+	if (srfkill->type == RFKILL_TYPE_WLAN)
+		ret = data.data[WL_STATUS_WLAN];
+	else if (srfkill->type == RFKILL_TYPE_BLUETOOTH)
+		ret = data.data[WL_STATUS_BT];
+	else
+		return ;
+
+	rfkill_set_sw_state(rfkill, !ret);
+}
+
+static const struct rfkill_ops swsmi_rfkill_ops = {
+	.set_block = swsmi_rfkill_set,
+	.query = swsmi_rfkill_query,
+};
+
+static ssize_t get_performance_level(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	const struct sabi_config *config = samsung->config;
+	const struct sabi_commands *commands = &config->commands;
+	struct sabi_data sretval;
+	int retval;
+	int i;
+
+	/* Read the state */
+	retval = sabi_command(samsung, commands->get_performance_level,
+			      NULL, &sretval);
+	if (retval)
+		return retval;
+
+	/* The logic is backwards, yeah, lots of fun... */
+	for (i = 0; config->performance_levels[i].name; ++i) {
+		if (sretval.data[0] == config->performance_levels[i].value)
+			return sprintf(buf, "%s\n", config->performance_levels[i].name);
+	}
+	return sprintf(buf, "%s\n", "unknown");
+}
+
+static ssize_t set_performance_level(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	const struct sabi_config *config = samsung->config;
+	const struct sabi_commands *commands = &config->commands;
+	int i;
+
+	if (count < 1)
+		return count;
+
+	for (i = 0; config->performance_levels[i].name; ++i) {
+		const struct sabi_performance_level *level =
+			&config->performance_levels[i];
+		if (!strncasecmp(level->name, buf, strlen(level->name))) {
+			sabi_set_commandb(samsung,
+					  commands->set_performance_level,
+					  level->value);
+			break;
+		}
+	}
+
+	if (!config->performance_levels[i].name)
+		return -EINVAL;
+
+	return count;
+}
+
+static DEVICE_ATTR(performance_level, 0644,
+		   get_performance_level, set_performance_level);
+
+static int read_battery_life_extender(struct samsung_laptop *samsung)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+	int retval;
+
+	if (commands->get_battery_life_extender == 0xFFFF)
+		return -ENODEV;
+
+	memset(&data, 0, sizeof(data));
+	data.data[0] = 0x80;
+	retval = sabi_command(samsung, commands->get_battery_life_extender,
+			      &data, &data);
+
+	if (retval)
+		return retval;
+
+	if (data.data[0] != 0 && data.data[0] != 1)
+		return -ENODEV;
+
+	return data.data[0];
+}
+
+static int write_battery_life_extender(struct samsung_laptop *samsung,
+				       int enabled)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+
+	memset(&data, 0, sizeof(data));
+	data.data[0] = 0x80 | enabled;
+	return sabi_command(samsung, commands->set_battery_life_extender,
+			    &data, NULL);
+}
+
+static ssize_t get_battery_life_extender(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	int ret;
+
+	ret = read_battery_life_extender(samsung);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t set_battery_life_extender(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	int ret, value;
+
+	if (!count || kstrtoint(buf, 0, &value) != 0)
+		return -EINVAL;
+
+	ret = write_battery_life_extender(samsung, !!value);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(battery_life_extender, 0644,
+		   get_battery_life_extender, set_battery_life_extender);
+
+static int read_usb_charge(struct samsung_laptop *samsung)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+	int retval;
+
+	if (commands->get_usb_charge == 0xFFFF)
+		return -ENODEV;
+
+	memset(&data, 0, sizeof(data));
+	data.data[0] = 0x80;
+	retval = sabi_command(samsung, commands->get_usb_charge,
+			      &data, &data);
+
+	if (retval)
+		return retval;
+
+	if (data.data[0] != 0 && data.data[0] != 1)
+		return -ENODEV;
+
+	return data.data[0];
+}
+
+static int write_usb_charge(struct samsung_laptop *samsung,
+			    int enabled)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+
+	memset(&data, 0, sizeof(data));
+	data.data[0] = 0x80 | enabled;
+	return sabi_command(samsung, commands->set_usb_charge,
+			    &data, NULL);
+}
+
+static ssize_t get_usb_charge(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	int ret;
+
+	ret = read_usb_charge(samsung);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t set_usb_charge(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	int ret, value;
+
+	if (!count || kstrtoint(buf, 0, &value) != 0)
+		return -EINVAL;
+
+	ret = write_usb_charge(samsung, !!value);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(usb_charge, 0644,
+		   get_usb_charge, set_usb_charge);
+
+static int read_lid_handling(struct samsung_laptop *samsung)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+	int retval;
+
+	if (commands->get_lid_handling == 0xFFFF)
+		return -ENODEV;
+
+	memset(&data, 0, sizeof(data));
+	retval = sabi_command(samsung, commands->get_lid_handling,
+			      &data, &data);
+
+	if (retval)
+		return retval;
+
+	return data.data[0] & 0x1;
+}
+
+static int write_lid_handling(struct samsung_laptop *samsung,
+			      int enabled)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+
+	memset(&data, 0, sizeof(data));
+	data.data[0] = 0x80 | enabled;
+	return sabi_command(samsung, commands->set_lid_handling,
+			    &data, NULL);
+}
+
+static ssize_t get_lid_handling(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	int ret;
+
+	ret = read_lid_handling(samsung);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t set_lid_handling(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	int ret, value;
+
+	if (!count || kstrtoint(buf, 0, &value) != 0)
+		return -EINVAL;
+
+	ret = write_lid_handling(samsung, !!value);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(lid_handling, 0644,
+		   get_lid_handling, set_lid_handling);
+
+static struct attribute *platform_attributes[] = {
+	&dev_attr_performance_level.attr,
+	&dev_attr_battery_life_extender.attr,
+	&dev_attr_usb_charge.attr,
+	&dev_attr_lid_handling.attr,
+	NULL
+};
+
+static int find_signature(void __iomem *memcheck, const char *testStr)
+{
+	int i = 0;
+	int loca;
+
+	for (loca = 0; loca < 0xffff; loca++) {
+		char temp = readb(memcheck + loca);
+
+		if (temp == testStr[i]) {
+			if (i == strlen(testStr)-1)
+				break;
+			++i;
+		} else {
+			i = 0;
+		}
+	}
+	return loca;
+}
+
+static void samsung_rfkill_exit(struct samsung_laptop *samsung)
+{
+	if (samsung->wlan.rfkill) {
+		rfkill_unregister(samsung->wlan.rfkill);
+		rfkill_destroy(samsung->wlan.rfkill);
+		samsung->wlan.rfkill = NULL;
+	}
+	if (samsung->bluetooth.rfkill) {
+		rfkill_unregister(samsung->bluetooth.rfkill);
+		rfkill_destroy(samsung->bluetooth.rfkill);
+		samsung->bluetooth.rfkill = NULL;
+	}
+}
+
+static int samsung_new_rfkill(struct samsung_laptop *samsung,
+			      struct samsung_rfkill *arfkill,
+			      const char *name, enum rfkill_type type,
+			      const struct rfkill_ops *ops,
+			      int blocked)
+{
+	struct rfkill **rfkill = &arfkill->rfkill;
+	int ret;
+
+	arfkill->type = type;
+	arfkill->samsung = samsung;
+
+	*rfkill = rfkill_alloc(name, &samsung->platform_device->dev,
+			       type, ops, arfkill);
+
+	if (!*rfkill)
+		return -EINVAL;
+
+	if (blocked != -1)
+		rfkill_init_sw_state(*rfkill, blocked);
+
+	ret = rfkill_register(*rfkill);
+	if (ret) {
+		rfkill_destroy(*rfkill);
+		*rfkill = NULL;
+		return ret;
+	}
+	return 0;
+}
+
+static int __init samsung_rfkill_init_seclinux(struct samsung_laptop *samsung)
+{
+	return samsung_new_rfkill(samsung, &samsung->wlan, "samsung-wlan",
+				  RFKILL_TYPE_WLAN, &seclinux_rfkill_ops, -1);
+}
+
+static int __init samsung_rfkill_init_swsmi(struct samsung_laptop *samsung)
+{
+	struct sabi_data data;
+	int ret;
+
+	ret = swsmi_wireless_status(samsung, &data);
+	if (ret) {
+		/* Some swsmi laptops use the old seclinux way to control
+		 * wireless devices */
+		if (ret == -EINVAL)
+			ret = samsung_rfkill_init_seclinux(samsung);
+		return ret;
+	}
+
+	/* 0x02 seems to mean that the device is no present/available */
+
+	if (data.data[WL_STATUS_WLAN] != 0x02)
+		ret = samsung_new_rfkill(samsung, &samsung->wlan,
+					 "samsung-wlan",
+					 RFKILL_TYPE_WLAN,
+					 &swsmi_rfkill_ops,
+					 !data.data[WL_STATUS_WLAN]);
+	if (ret)
+		goto exit;
+
+	if (data.data[WL_STATUS_BT] != 0x02)
+		ret = samsung_new_rfkill(samsung, &samsung->bluetooth,
+					 "samsung-bluetooth",
+					 RFKILL_TYPE_BLUETOOTH,
+					 &swsmi_rfkill_ops,
+					 !data.data[WL_STATUS_BT]);
+	if (ret)
+		goto exit;
+
+exit:
+	if (ret)
+		samsung_rfkill_exit(samsung);
+
+	return ret;
+}
+
+static int __init samsung_rfkill_init(struct samsung_laptop *samsung)
+{
+	if (samsung->config->sabi_version == 2)
+		return samsung_rfkill_init_seclinux(samsung);
+	if (samsung->config->sabi_version == 3)
+		return samsung_rfkill_init_swsmi(samsung);
+	return 0;
+}
+
+static void samsung_lid_handling_exit(struct samsung_laptop *samsung)
+{
+	if (samsung->quirks->lid_handling)
+		write_lid_handling(samsung, 0);
+}
+
+static int __init samsung_lid_handling_init(struct samsung_laptop *samsung)
+{
+	int retval = 0;
+
+	if (samsung->quirks->lid_handling)
+		retval = write_lid_handling(samsung, 1);
+
+	return retval;
+}
+
+static int kbd_backlight_enable(struct samsung_laptop *samsung)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+	int retval;
+
+	if (commands->kbd_backlight == 0xFFFF)
+		return -ENODEV;
+
+	memset(&data, 0, sizeof(data));
+	data.d0 = 0xaabb;
+	retval = sabi_command(samsung, commands->kbd_backlight,
+			      &data, &data);
+
+	if (retval)
+		return retval;
+
+	if (data.d0 != 0xccdd)
+		return -ENODEV;
+	return 0;
+}
+
+static int kbd_backlight_read(struct samsung_laptop *samsung)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+	int retval;
+
+	memset(&data, 0, sizeof(data));
+	data.data[0] = 0x81;
+	retval = sabi_command(samsung, commands->kbd_backlight,
+			      &data, &data);
+
+	if (retval)
+		return retval;
+
+	return data.data[0];
+}
+
+static int kbd_backlight_write(struct samsung_laptop *samsung, int brightness)
+{
+	const struct sabi_commands *commands = &samsung->config->commands;
+	struct sabi_data data;
+
+	memset(&data, 0, sizeof(data));
+	data.d0 = 0x82 | ((brightness & 0xFF) << 8);
+	return sabi_command(samsung, commands->kbd_backlight,
+			    &data, NULL);
+}
+
+static void kbd_led_update(struct work_struct *work)
+{
+	struct samsung_laptop *samsung;
+
+	samsung = container_of(work, struct samsung_laptop, kbd_led_work);
+	kbd_backlight_write(samsung, samsung->kbd_led_wk);
+}
+
+static void kbd_led_set(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct samsung_laptop *samsung;
+
+	samsung = container_of(led_cdev, struct samsung_laptop, kbd_led);
+
+	if (value > samsung->kbd_led.max_brightness)
+		value = samsung->kbd_led.max_brightness;
+
+	samsung->kbd_led_wk = value;
+	queue_work(samsung->led_workqueue, &samsung->kbd_led_work);
+}
+
+static enum led_brightness kbd_led_get(struct led_classdev *led_cdev)
+{
+	struct samsung_laptop *samsung;
+
+	samsung = container_of(led_cdev, struct samsung_laptop, kbd_led);
+	return kbd_backlight_read(samsung);
+}
+
+static void samsung_leds_exit(struct samsung_laptop *samsung)
+{
+	led_classdev_unregister(&samsung->kbd_led);
+	if (samsung->led_workqueue)
+		destroy_workqueue(samsung->led_workqueue);
+}
+
+static int __init samsung_leds_init(struct samsung_laptop *samsung)
+{
+	int ret = 0;
+
+	samsung->led_workqueue = create_singlethread_workqueue("led_workqueue");
+	if (!samsung->led_workqueue)
+		return -ENOMEM;
+
+	if (kbd_backlight_enable(samsung) >= 0) {
+		INIT_WORK(&samsung->kbd_led_work, kbd_led_update);
+
+		samsung->kbd_led.name = "samsung::kbd_backlight";
+		samsung->kbd_led.brightness_set = kbd_led_set;
+		samsung->kbd_led.brightness_get = kbd_led_get;
+		samsung->kbd_led.max_brightness = 8;
+		if (samsung->quirks->four_kbd_backlight_levels)
+			samsung->kbd_led.max_brightness = 4;
+
+		ret = led_classdev_register(&samsung->platform_device->dev,
+					   &samsung->kbd_led);
+	}
+
+	if (ret)
+		samsung_leds_exit(samsung);
+
+	return ret;
+}
+
+static void samsung_backlight_exit(struct samsung_laptop *samsung)
+{
+	if (samsung->backlight_device) {
+		backlight_device_unregister(samsung->backlight_device);
+		samsung->backlight_device = NULL;
+	}
+}
+
+static int __init samsung_backlight_init(struct samsung_laptop *samsung)
+{
+	struct backlight_device *bd;
+	struct backlight_properties props;
+
+	if (!samsung->handle_backlight)
+		return 0;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_PLATFORM;
+	props.max_brightness = samsung->config->max_brightness -
+		samsung->config->min_brightness;
+
+	bd = backlight_device_register("samsung",
+				       &samsung->platform_device->dev,
+				       samsung, &backlight_ops,
+				       &props);
+	if (IS_ERR(bd))
+		return PTR_ERR(bd);
+
+	samsung->backlight_device = bd;
+	samsung->backlight_device->props.brightness = read_brightness(samsung);
+	samsung->backlight_device->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(samsung->backlight_device);
+
+	return 0;
+}
+
+static umode_t samsung_sysfs_is_visible(struct kobject *kobj,
+					struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct samsung_laptop *samsung = dev_get_drvdata(dev);
+	bool ok = true;
+
+	if (attr == &dev_attr_performance_level.attr)
+		ok = !!samsung->config->performance_levels[0].name;
+	if (attr == &dev_attr_battery_life_extender.attr)
+		ok = !!(read_battery_life_extender(samsung) >= 0);
+	if (attr == &dev_attr_usb_charge.attr)
+		ok = !!(read_usb_charge(samsung) >= 0);
+	if (attr == &dev_attr_lid_handling.attr)
+		ok = !!(read_lid_handling(samsung) >= 0);
+
+	return ok ? attr->mode : 0;
+}
+
+static const struct attribute_group platform_attribute_group = {
+	.is_visible = samsung_sysfs_is_visible,
+	.attrs = platform_attributes
+};
+
+static void samsung_sysfs_exit(struct samsung_laptop *samsung)
+{
+	struct platform_device *device = samsung->platform_device;
+
+	sysfs_remove_group(&device->dev.kobj, &platform_attribute_group);
+}
+
+static int __init samsung_sysfs_init(struct samsung_laptop *samsung)
+{
+	struct platform_device *device = samsung->platform_device;
+
+	return sysfs_create_group(&device->dev.kobj, &platform_attribute_group);
+
+}
+
+static int samsung_laptop_call_show(struct seq_file *m, void *data)
+{
+	struct samsung_laptop *samsung = m->private;
+	struct sabi_data *sdata = &samsung->debug.data;
+	int ret;
+
+	seq_printf(m, "SABI 0x%04x {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n",
+		   samsung->debug.command,
+		   sdata->d0, sdata->d1, sdata->d2, sdata->d3);
+
+	ret = sabi_command(samsung, samsung->debug.command, sdata, sdata);
+
+	if (ret) {
+		seq_printf(m, "SABI command 0x%04x failed\n",
+			   samsung->debug.command);
+		return ret;
+	}
+
+	seq_printf(m, "SABI {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n",
+		   sdata->d0, sdata->d1, sdata->d2, sdata->d3);
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(samsung_laptop_call);
+
+static void samsung_debugfs_exit(struct samsung_laptop *samsung)
+{
+	debugfs_remove_recursive(samsung->debug.root);
+}
+
+static void samsung_debugfs_init(struct samsung_laptop *samsung)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir("samsung-laptop", NULL);
+	samsung->debug.root = root;
+
+	samsung->debug.f0000_wrapper.data = samsung->f0000_segment;
+	samsung->debug.f0000_wrapper.size = 0xffff;
+
+	samsung->debug.data_wrapper.data = &samsung->debug.data;
+	samsung->debug.data_wrapper.size = sizeof(samsung->debug.data);
+
+	samsung->debug.sdiag_wrapper.data = samsung->sdiag;
+	samsung->debug.sdiag_wrapper.size = strlen(samsung->sdiag);
+
+	debugfs_create_u16("command", 0644, root, &samsung->debug.command);
+	debugfs_create_u32("d0", 0644, root, &samsung->debug.data.d0);
+	debugfs_create_u32("d1", 0644, root, &samsung->debug.data.d1);
+	debugfs_create_u16("d2", 0644, root, &samsung->debug.data.d2);
+	debugfs_create_u8("d3", 0644, root, &samsung->debug.data.d3);
+	debugfs_create_blob("data", 0444, root, &samsung->debug.data_wrapper);
+	debugfs_create_blob("f0000_segment", 0400, root,
+			    &samsung->debug.f0000_wrapper);
+	debugfs_create_file("call", 0444, root, samsung,
+			    &samsung_laptop_call_fops);
+	debugfs_create_blob("sdiag", 0444, root, &samsung->debug.sdiag_wrapper);
+}
+
+static void samsung_sabi_exit(struct samsung_laptop *samsung)
+{
+	const struct sabi_config *config = samsung->config;
+
+	/* Turn off "Linux" mode in the BIOS */
+	if (config && config->commands.set_linux != 0xff)
+		sabi_set_commandb(samsung, config->commands.set_linux, 0x80);
+
+	if (samsung->sabi_iface) {
+		iounmap(samsung->sabi_iface);
+		samsung->sabi_iface = NULL;
+	}
+	if (samsung->f0000_segment) {
+		iounmap(samsung->f0000_segment);
+		samsung->f0000_segment = NULL;
+	}
+
+	samsung->config = NULL;
+}
+
+static __init void samsung_sabi_infos(struct samsung_laptop *samsung, int loca,
+				      unsigned int ifaceP)
+{
+	const struct sabi_config *config = samsung->config;
+
+	printk(KERN_DEBUG "This computer supports SABI==%x\n",
+	       loca + 0xf0000 - 6);
+
+	printk(KERN_DEBUG "SABI header:\n");
+	printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
+	       readw(samsung->sabi + config->header_offsets.port));
+	printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
+	       readb(samsung->sabi + config->header_offsets.iface_func));
+	printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
+	       readb(samsung->sabi + config->header_offsets.en_mem));
+	printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
+	       readb(samsung->sabi + config->header_offsets.re_mem));
+	printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
+	       readw(samsung->sabi + config->header_offsets.data_offset));
+	printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
+	       readw(samsung->sabi + config->header_offsets.data_segment));
+
+	printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP);
+}
+
+static void __init samsung_sabi_diag(struct samsung_laptop *samsung)
+{
+	int loca = find_signature(samsung->f0000_segment, "SDiaG@");
+	int i;
+
+	if (loca == 0xffff)
+		return ;
+
+	/* Example:
+	 * Ident: @SDiaG@686XX-N90X3A/966-SEC-07HL-S90X3A
+	 *
+	 * Product name: 90X3A
+	 * BIOS Version: 07HL
+	 */
+	loca += 1;
+	for (i = 0; loca < 0xffff && i < sizeof(samsung->sdiag) - 1; loca++) {
+		char temp = readb(samsung->f0000_segment + loca);
+
+		if (isalnum(temp) || temp == '/' || temp == '-')
+			samsung->sdiag[i++] = temp;
+		else
+			break ;
+	}
+
+	if (debug && samsung->sdiag[0])
+		pr_info("sdiag: %s", samsung->sdiag);
+}
+
+static int __init samsung_sabi_init(struct samsung_laptop *samsung)
+{
+	const struct sabi_config *config = NULL;
+	const struct sabi_commands *commands;
+	unsigned int ifaceP;
+	int loca = 0xffff;
+	int ret = 0;
+	int i;
+
+	samsung->f0000_segment = ioremap(0xf0000, 0xffff);
+	if (!samsung->f0000_segment) {
+		if (debug || force)
+			pr_err("Can't map the segment at 0xf0000\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	samsung_sabi_diag(samsung);
+
+	/* Try to find one of the signatures in memory to find the header */
+	for (i = 0; sabi_configs[i].test_string != NULL; ++i) {
+		samsung->config = &sabi_configs[i];
+		loca = find_signature(samsung->f0000_segment,
+				      samsung->config->test_string);
+		if (loca != 0xffff)
+			break;
+	}
+
+	if (loca == 0xffff) {
+		if (debug || force)
+			pr_err("This computer does not support SABI\n");
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	config = samsung->config;
+	commands = &config->commands;
+
+	/* point to the SMI port Number */
+	loca += 1;
+	samsung->sabi = (samsung->f0000_segment + loca);
+
+	/* Get a pointer to the SABI Interface */
+	ifaceP = (readw(samsung->sabi + config->header_offsets.data_segment) & 0x0ffff) << 4;
+	ifaceP += readw(samsung->sabi + config->header_offsets.data_offset) & 0x0ffff;
+
+	if (debug)
+		samsung_sabi_infos(samsung, loca, ifaceP);
+
+	samsung->sabi_iface = ioremap(ifaceP, 16);
+	if (!samsung->sabi_iface) {
+		pr_err("Can't remap %x\n", ifaceP);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Turn on "Linux" mode in the BIOS */
+	if (commands->set_linux != 0xff) {
+		int retval = sabi_set_commandb(samsung,
+					       commands->set_linux, 0x81);
+		if (retval) {
+			pr_warn("Linux mode was not set!\n");
+			ret = -ENODEV;
+			goto exit;
+		}
+	}
+
+	/* Check for stepping quirk */
+	if (samsung->handle_backlight)
+		check_for_stepping_quirk(samsung);
+
+	pr_info("detected SABI interface: %s\n",
+		samsung->config->test_string);
+
+exit:
+	if (ret)
+		samsung_sabi_exit(samsung);
+
+	return ret;
+}
+
+static void samsung_platform_exit(struct samsung_laptop *samsung)
+{
+	if (samsung->platform_device) {
+		platform_device_unregister(samsung->platform_device);
+		samsung->platform_device = NULL;
+	}
+}
+
+static int samsung_pm_notification(struct notifier_block *nb,
+				   unsigned long val, void *ptr)
+{
+	struct samsung_laptop *samsung;
+
+	samsung = container_of(nb, struct samsung_laptop, pm_nb);
+	if (val == PM_POST_HIBERNATION &&
+	    samsung->quirks->enable_kbd_backlight)
+		kbd_backlight_enable(samsung);
+
+	if (val == PM_POST_HIBERNATION && samsung->quirks->lid_handling)
+		write_lid_handling(samsung, 1);
+
+	return 0;
+}
+
+static int __init samsung_platform_init(struct samsung_laptop *samsung)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("samsung", PLATFORM_DEVID_NONE, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	samsung->platform_device = pdev;
+	platform_set_drvdata(samsung->platform_device, samsung);
+	return 0;
+}
+
+static struct samsung_quirks *quirks;
+
+static int __init samsung_dmi_matched(const struct dmi_system_id *d)
+{
+	quirks = d->driver_data;
+	return 0;
+}
+
+static const struct dmi_system_id samsung_dmi_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+					"SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+					"SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+					"SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+					"SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */
+		},
+	},
+	/* DMI ids for laptops with bad Chassis Type */
+	{
+	  .ident = "R40/R41",
+	  .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "R40/R41"),
+		DMI_MATCH(DMI_BOARD_NAME, "R40/R41"),
+		},
+	},
+	/* Specific DMI ids for laptop with quirks */
+	{
+	 .callback = samsung_dmi_matched,
+	 .ident = "730U3E/740U3E",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"),
+		},
+	 .driver_data = &samsung_np740u3e,
+	},
+	{
+	 .callback = samsung_dmi_matched,
+	 .ident = "300V3Z/300V4Z/300V5Z",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "300V3Z/300V4Z/300V5Z"),
+		},
+	 .driver_data = &samsung_lid_handling,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
+
+static struct platform_device *samsung_platform_device;
+
+static int __init samsung_init(void)
+{
+	struct samsung_laptop *samsung;
+	int ret;
+
+	if (efi_enabled(EFI_BOOT))
+		return -ENODEV;
+
+	quirks = &samsung_unknown;
+	if (!force && !dmi_check_system(samsung_dmi_table))
+		return -ENODEV;
+
+	samsung = kzalloc(sizeof(*samsung), GFP_KERNEL);
+	if (!samsung)
+		return -ENOMEM;
+
+	mutex_init(&samsung->sabi_mutex);
+	samsung->handle_backlight = true;
+	samsung->quirks = quirks;
+
+	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+		samsung->handle_backlight = false;
+
+	ret = samsung_platform_init(samsung);
+	if (ret)
+		goto error_platform;
+
+	ret = samsung_sabi_init(samsung);
+	if (ret)
+		goto error_sabi;
+
+	ret = samsung_sysfs_init(samsung);
+	if (ret)
+		goto error_sysfs;
+
+	ret = samsung_backlight_init(samsung);
+	if (ret)
+		goto error_backlight;
+
+	ret = samsung_rfkill_init(samsung);
+	if (ret)
+		goto error_rfkill;
+
+	ret = samsung_leds_init(samsung);
+	if (ret)
+		goto error_leds;
+
+	ret = samsung_lid_handling_init(samsung);
+	if (ret)
+		goto error_lid_handling;
+
+	samsung_debugfs_init(samsung);
+
+	samsung->pm_nb.notifier_call = samsung_pm_notification;
+	register_pm_notifier(&samsung->pm_nb);
+
+	samsung_platform_device = samsung->platform_device;
+	return ret;
+
+error_lid_handling:
+	samsung_leds_exit(samsung);
+error_leds:
+	samsung_rfkill_exit(samsung);
+error_rfkill:
+	samsung_backlight_exit(samsung);
+error_backlight:
+	samsung_sysfs_exit(samsung);
+error_sysfs:
+	samsung_sabi_exit(samsung);
+error_sabi:
+	samsung_platform_exit(samsung);
+error_platform:
+	kfree(samsung);
+	return ret;
+}
+
+static void __exit samsung_exit(void)
+{
+	struct samsung_laptop *samsung;
+
+	samsung = platform_get_drvdata(samsung_platform_device);
+	unregister_pm_notifier(&samsung->pm_nb);
+
+	samsung_debugfs_exit(samsung);
+	samsung_lid_handling_exit(samsung);
+	samsung_leds_exit(samsung);
+	samsung_rfkill_exit(samsung);
+	samsung_backlight_exit(samsung);
+	samsung_sysfs_exit(samsung);
+	samsung_sabi_exit(samsung);
+	samsung_platform_exit(samsung);
+
+	kfree(samsung);
+	samsung_platform_device = NULL;
+}
+
+module_init(samsung_init);
+module_exit(samsung_exit);
+
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
+MODULE_DESCRIPTION("Samsung Backlight driver");
+MODULE_LICENSE("GPL");