Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 189 insertions, 0 deletions

diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
new file mode 100644
index 000000000..fe4971b65
--- /dev/null
+++ b/drivers/ptp/Kconfig
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PTP clock support configuration
+#
+
+menu "PTP clock support"
+
+config PTP_1588_CLOCK
+	tristate "PTP clock support"
+	depends on NET && POSIX_TIMERS
+	default ETHERNET
+	select PPS
+	select NET_PTP_CLASSIFY
+	help
+	  The IEEE 1588 standard defines a method to precisely
+	  synchronize distributed clocks over Ethernet networks. The
+	  standard defines a Precision Time Protocol (PTP), which can
+	  be used to achieve synchronization within a few dozen
+	  microseconds. In addition, with the help of special hardware
+	  time stamping units, it can be possible to achieve
+	  synchronization to within a few hundred nanoseconds.
+
+	  This driver adds support for PTP clocks as character
+	  devices. If you want to use a PTP clock, then you should
+	  also enable at least one clock driver as well.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp.
+
+config PTP_1588_CLOCK_OPTIONAL
+	tristate
+	default y if PTP_1588_CLOCK=n
+	default PTP_1588_CLOCK
+	help
+	  Drivers that can optionally use the PTP_1588_CLOCK framework
+	  should depend on this symbol to prevent them from being built
+	  into vmlinux while the PTP support itself is in a loadable
+	  module.
+	  If PTP support is disabled, this dependency will still be
+	  met, and drivers refer to dummy helpers.
+
+config PTP_1588_CLOCK_DTE
+	tristate "Broadcom DTE as PTP clock"
+	depends on PTP_1588_CLOCK
+	depends on NET && HAS_IOMEM
+	depends on ARCH_BCM_MOBILE || (ARCH_BCM_IPROC && !(ARCH_BCM_NSP || ARCH_BCM_5301X)) || COMPILE_TEST
+	default y
+	help
+	  This driver adds support for using the Digital timing engine
+	  (DTE) in the Broadcom SoC's as a PTP clock.
+
+	  The clock can be used in both wired and wireless networks
+	  for PTP purposes.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_dte.
+
+config PTP_1588_CLOCK_QORIQ
+	tristate "Freescale QorIQ 1588 timer as PTP clock"
+	depends on GIANFAR || FSL_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF || COMPILE_TEST
+	depends on PTP_1588_CLOCK
+	default y
+	help
+	  This driver adds support for using the Freescale QorIQ 1588
+	  timer as a PTP clock. This clock is only useful if your PTP
+	  programs are getting hardware time stamps on the PTP Ethernet
+	  packets using the SO_TIMESTAMPING API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp-qoriq.
+
+comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."
+	depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n
+
+config DP83640_PHY
+	tristate "Driver for the National Semiconductor DP83640 PHYTER"
+	depends on NETWORK_PHY_TIMESTAMPING
+	depends on PHYLIB
+	depends on PTP_1588_CLOCK
+	select CRC32
+	help
+	  Supports the DP83640 PHYTER with IEEE 1588 features.
+
+	  This driver adds support for using the DP83640 as a PTP
+	  clock. This clock is only useful if your PTP programs are
+	  getting hardware time stamps on the PTP Ethernet packets
+	  using the SO_TIMESTAMPING API.
+
+	  In order for this to work, your MAC driver must also
+	  implement the skb_tx_timestamp() function.
+
+config PTP_1588_CLOCK_INES
+	tristate "ZHAW InES PTP time stamping IP core"
+	depends on NETWORK_PHY_TIMESTAMPING
+	depends on HAS_IOMEM
+	depends on PHYLIB
+	depends on PTP_1588_CLOCK
+	help
+	  This driver adds support for using the ZHAW InES 1588 IP
+	  core.  This clock is only useful if the MII bus of your MAC
+	  is wired up to the core.
+
+config PTP_1588_CLOCK_PCH
+	tristate "Intel PCH EG20T as PTP clock"
+	depends on X86_32 || COMPILE_TEST
+	depends on HAS_IOMEM && PCI
+	depends on NET
+	depends on PTP_1588_CLOCK
+	help
+	  This driver adds support for using the PCH EG20T as a PTP
+	  clock. The hardware supports time stamping of PTP packets
+	  when using the end-to-end delay (E2E) mechanism. The peer
+	  delay mechanism (P2P) is not supported.
+
+	  This clock is only useful if your PTP programs are getting
+	  hardware time stamps on the PTP Ethernet packets using the
+	  SO_TIMESTAMPING API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_pch.
+
+config PTP_1588_CLOCK_KVM
+	tristate "KVM virtual PTP clock"
+	depends on PTP_1588_CLOCK
+	depends on (KVM_GUEST && X86) || (HAVE_ARM_SMCCC_DISCOVERY && ARM_ARCH_TIMER)
+	default y
+	help
+	  This driver adds support for using kvm infrastructure as a PTP
+	  clock. This clock is only useful if you are using KVM guests.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_kvm.
+
+config PTP_1588_CLOCK_IDT82P33
+	tristate "IDT 82P33xxx PTP clock"
+	depends on PTP_1588_CLOCK && I2C
+	default n
+	help
+	  This driver adds support for using the IDT 82P33xxx as a PTP
+	  clock. This clock is only useful if your time stamping MAC
+	  is connected to the IDT chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_idt82p33.
+
+config PTP_1588_CLOCK_IDTCM
+	tristate "IDT CLOCKMATRIX as PTP clock"
+	depends on PTP_1588_CLOCK && I2C
+	default n
+	help
+	  This driver adds support for using IDT CLOCKMATRIX(TM) as a PTP
+	  clock. This clock is only useful if your time stamping MAC
+	  is connected to the IDT chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_clockmatrix.
+
+config PTP_1588_CLOCK_VMW
+	tristate "VMware virtual PTP clock"
+	depends on ACPI && HYPERVISOR_GUEST && X86
+	depends on PTP_1588_CLOCK
+	help
+	  This driver adds support for using VMware virtual precision
+	  clock device as a PTP clock. This is only useful in virtual
+	  machines running on VMware virtual infrastructure.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_vmw.
+
+config PTP_1588_CLOCK_OCP
+	tristate "OpenCompute TimeCard as PTP clock"
+	depends on PTP_1588_CLOCK
+	depends on HAS_IOMEM && PCI
+	depends on I2C && MTD
+	depends on SERIAL_8250
+	depends on !S390
+	depends on COMMON_CLK
+	select NET_DEVLINK
+	select CRC16
+	help
+	  This driver adds support for an OpenCompute time card.
+
+	  The OpenCompute time card is an atomic clock along with
+	  a GPS receiver that provides a Grandmaster clock source
+	  for a PTP enabled network.
+
+	  More information is available at http://www.timingcard.com/
+
+endmenu