summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/scsi/Kconfig
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r--drivers/scsi/Kconfig1527
1 files changed, 1527 insertions, 0 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
new file mode 100644
index 000000000..03e71e3d5
--- /dev/null
+++ b/drivers/scsi/Kconfig
@@ -0,0 +1,1527 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "SCSI device support"
+
+config SCSI_MOD
+ tristate
+ default y if SCSI=n || SCSI=y
+ default m if SCSI=m
+ depends on BLOCK
+
+config RAID_ATTRS
+ tristate "RAID Transport Class"
+ default n
+ depends on BLOCK
+ depends on SCSI_MOD
+ help
+ Provides RAID
+
+config SCSI_COMMON
+ tristate
+
+config SCSI
+ tristate "SCSI device support"
+ depends on BLOCK
+ select SCSI_DMA if HAS_DMA
+ select SG_POOL
+ select SCSI_COMMON
+ select BLK_DEV_BSG_COMMON if BLK_DEV_BSG
+ help
+ If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+ any other SCSI device under Linux, say Y and make sure that you know
+ the name of your SCSI host adapter (the card inside your computer
+ that "speaks" the SCSI protocol, also called SCSI controller),
+ because you will be asked for it.
+
+ You also need to say Y here if you have a device which speaks
+ the SCSI protocol. Examples of this include the parallel port
+ version of the IOMEGA ZIP drive, USB storage devices, Fibre
+ Channel, and FireWire storage.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>.
+ The module will be called scsi_mod.
+
+ However, do not compile this as a module if your root file system
+ (the one containing the directory /) is located on a SCSI device.
+
+config SCSI_DMA
+ bool
+ default n
+
+config SCSI_ESP_PIO
+ bool
+
+config SCSI_NETLINK
+ bool
+ default n
+ depends on NET
+
+config SCSI_PROC_FS
+ bool "legacy /proc/scsi/ support"
+ depends on SCSI && PROC_FS
+ default y
+ help
+ This option enables support for the various files in
+ /proc/scsi. In Linux 2.6 this has been superseded by
+ files in sysfs but many legacy applications rely on this.
+
+ If unsure say Y.
+
+comment "SCSI support type (disk, tape, CD-ROM)"
+ depends on SCSI
+
+config BLK_DEV_SD
+ tristate "SCSI disk support"
+ depends on SCSI
+ select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY
+ help
+ If you want to use SCSI hard disks, Fibre Channel disks,
+ Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
+ USB storage or the SCSI or parallel port version of
+ the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
+ the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
+ CD-ROMs.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>.
+ The module will be called sd_mod.
+
+ Do not compile this driver as a module if your root file system
+ (the one containing the directory /) is located on a SCSI disk.
+ In this case, do not compile the driver for your SCSI host adapter
+ (below) as a module either.
+
+config CHR_DEV_ST
+ tristate "SCSI tape support"
+ depends on SCSI
+ help
+ If you want to use a SCSI tape drive under Linux, say Y and read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, and
+ <file:Documentation/scsi/st.rst> in the kernel source. This is NOT
+ for SCSI CD-ROMs.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>. The module will be called st.
+
+config BLK_DEV_SR
+ tristate "SCSI CDROM support"
+ depends on SCSI && BLK_DEV
+ select CDROM
+ help
+ If you want to use a CD or DVD drive attached to your computer
+ by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
+ and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
+
+ Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>.
+ The module will be called sr_mod.
+
+config CHR_DEV_SG
+ tristate "SCSI generic support"
+ depends on SCSI
+ help
+ If you want to use SCSI scanners, synthesizers or CD-writers or just
+ about anything having "SCSI" in its name other than hard disks,
+ CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+ directly, so you need some additional software which knows how to
+ talk to these devices using the SCSI protocol:
+
+ For scanners, look at SANE (<http://www.sane-project.org/>). For CD
+ writer software look at Cdrtools
+ (<http://cdrtools.sourceforge.net/>)
+ and for burning a "disk at once": CDRDAO
+ (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+ quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+ For other devices, it's possible that you'll have to write the
+ driver software yourself. Please read the file
+ <file:Documentation/scsi/scsi-generic.rst> for more information.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>. The module will be called sg.
+
+ If unsure, say N.
+
+config BLK_DEV_BSG
+ bool "/dev/bsg support (SG v4)"
+ depends on SCSI
+ default y
+ help
+ Saying Y here will enable generic SG (SCSI generic) v4 support
+ for any SCSI device.
+
+ This option is required by UDEV to access device serial numbers, etc.
+
+ If unsure, say Y.
+
+config CHR_DEV_SCH
+ tristate "SCSI media changer support"
+ depends on SCSI
+ help
+ This is a driver for SCSI media changers. Most common devices are
+ tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
+ don't need this for those tiny 6-slot cdrom changers. Media
+ changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
+ If you have such hardware and want to use it with linux, say Y
+ here. Check <file:Documentation/scsi/scsi-changer.rst> for details.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.rst> and
+ <file:Documentation/scsi/scsi.rst>. The module will be called ch.o.
+ If unsure, say N.
+
+config SCSI_ENCLOSURE
+ tristate "SCSI Enclosure Support"
+ depends on SCSI && ENCLOSURE_SERVICES
+ depends on m || SCSI_SAS_ATTRS != m
+ help
+ Enclosures are devices sitting on or in SCSI backplanes that
+ manage devices. If you have a disk cage, the chances are that
+ it has an enclosure device. Selecting this option will just allow
+ certain enclosure conditions to be reported and is not required.
+
+config SCSI_CONSTANTS
+ bool "Verbose SCSI error reporting (kernel size += 36K)"
+ depends on SCSI
+ help
+ The error messages regarding your SCSI hardware will be easier to
+ understand if you say Y here; it will enlarge your kernel by about
+ 36 KB. If in doubt, say Y.
+
+config SCSI_LOGGING
+ bool "SCSI logging facility"
+ depends on SCSI
+ help
+ This turns on a logging facility that can be used to debug a number
+ of SCSI related problems.
+
+ If you say Y here, no logging output will appear by default, but you
+ can enable logging by saying Y to "/proc file system support" and
+ "Sysctl support" below and executing the command
+
+ echo <bitmask> > /proc/sys/dev/scsi/logging_level
+
+ where <bitmask> is a four byte value representing the logging type
+ and logging level for each type of logging selected.
+
+ There are a number of logging types and you can find them in the
+ source at <file:drivers/scsi/scsi_logging.h>. The logging levels
+ are also described in that file and they determine the verbosity of
+ the logging for each logging type.
+
+ If you say N here, it may be harder to track down some types of SCSI
+ problems. If you say Y here your kernel will be somewhat larger, but
+ there should be no noticeable performance impact as long as you have
+ logging turned off.
+
+config SCSI_SCAN_ASYNC
+ bool "Asynchronous SCSI scanning"
+ depends on SCSI
+ help
+ The SCSI subsystem can probe for devices while the rest of the
+ system continues booting, and even probe devices on different
+ busses in parallel, leading to a significant speed-up.
+
+ You can override this choice by specifying "scsi_mod.scan=sync"
+ or async on the kernel's command line.
+
+ Note that this setting also affects whether resuming from
+ system suspend will be performed asynchronously.
+
+menu "SCSI Transports"
+ depends on SCSI
+
+config SCSI_SPI_ATTRS
+ tristate "Parallel SCSI (SPI) Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached SCSI device to sysfs, say Y. Otherwise, say N.
+
+config SCSI_FC_ATTRS
+ tristate "FiberChannel Transport Attributes"
+ depends on SCSI && NET
+ select BLK_DEV_BSGLIB
+ select SCSI_NETLINK
+ help
+ If you wish to export transport-specific information about
+ each attached FiberChannel device to sysfs, say Y.
+ Otherwise, say N.
+
+config SCSI_ISCSI_ATTRS
+ tristate "iSCSI Transport Attributes"
+ depends on SCSI && NET
+ select BLK_DEV_BSGLIB
+ help
+ If you wish to export transport-specific information about
+ each attached iSCSI device to sysfs, say Y.
+ Otherwise, say N.
+
+config SCSI_SAS_ATTRS
+ tristate "SAS Transport Attributes"
+ depends on SCSI
+ select BLK_DEV_BSGLIB
+ help
+ If you wish to export transport-specific information about
+ each attached SAS device to sysfs, say Y.
+
+source "drivers/scsi/libsas/Kconfig"
+
+config SCSI_SRP_ATTRS
+ tristate "SRP Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached SRP device to sysfs, say Y.
+
+endmenu
+
+menuconfig SCSI_LOWLEVEL
+ bool "SCSI low-level drivers"
+ depends on SCSI!=n
+ default y
+
+if SCSI_LOWLEVEL && SCSI
+
+config ISCSI_TCP
+ tristate "iSCSI Initiator over TCP/IP"
+ depends on SCSI && INET
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_CRC32C
+ select SCSI_ISCSI_ATTRS
+ help
+ The iSCSI Driver provides a host with the ability to access storage
+ through an IP network. The driver uses the iSCSI protocol to transport
+ SCSI requests and responses over a TCP/IP network between the host
+ (the "initiator") and "targets". Architecturally, the iSCSI driver
+ combines with the host's TCP/IP stack, network drivers, and Network
+ Interface Card (NIC) to provide the same functions as a SCSI or a
+ Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
+
+ To compile this driver as a module, choose M here: the
+ module will be called iscsi_tcp.
+
+ The userspace component needed to initialize the driver, documentation,
+ and sample configuration files can be found here:
+
+ http://open-iscsi.org
+
+config ISCSI_BOOT_SYSFS
+ tristate "iSCSI Boot Sysfs Interface"
+ default n
+ help
+ This option enables support for exposing iSCSI boot information
+ via sysfs to userspace. If you wish to export this information,
+ say Y. Otherwise, say N.
+
+source "drivers/scsi/cxgbi/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
+source "drivers/scsi/bnx2fc/Kconfig"
+source "drivers/scsi/be2iscsi/Kconfig"
+source "drivers/scsi/cxlflash/Kconfig"
+
+config SGIWD93_SCSI
+ tristate "SGI WD93C93 SCSI Driver"
+ depends on SGI_HAS_WD93 && SCSI
+ help
+ If you have a Western Digital WD93 SCSI controller on
+ an SGI MIPS system, say Y. Otherwise, say N.
+
+config BLK_DEV_3W_XXXX_RAID
+ tristate "3ware 5/6/7/8xxx ATA-RAID support"
+ depends on PCI && SCSI
+ help
+ 3ware is the only hardware ATA-Raid product in Linux to date.
+ This card is 2,4, or 8 channel master mode support only.
+ SCSI support required!!!
+
+ <http://www.3ware.com/>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-xxxx.c>.
+
+config SCSI_HPSA
+ tristate "HP Smart Array SCSI driver"
+ depends on PCI && SCSI
+ select CHECK_SIGNATURE
+ select SCSI_SAS_ATTRS
+ help
+ This driver supports HP Smart Array Controllers (circa 2009).
+ It is a SCSI alternative to the cciss driver, which is a block
+ driver. Anyone wishing to use HP Smart Array controllers who
+ would prefer the devices be presented to linux as SCSI devices,
+ rather than as generic block devices should say Y here.
+
+config SCSI_3W_9XXX
+ tristate "3ware 9xxx SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the 9000 series 3ware SATA-RAID cards.
+
+ <http://www.amcc.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-9xxx.c>.
+
+config SCSI_3W_SAS
+ tristate "3ware 97xx SAS/SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
+
+ <http://www.lsi.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-sas.c>.
+
+config SCSI_ACARD
+ tristate "ACARD SCSI support"
+ depends on PCI && SCSI
+ help
+ This driver supports the ACARD SCSI host adapter.
+ Support Chip <ATP870 ATP876 ATP880 ATP885>
+ To compile this driver as a module, choose M here: the
+ module will be called atp870u.
+
+config SCSI_AHA152X
+ tristate "Adaptec AHA152X/2825 support"
+ depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
+ help
+ This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
+ SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
+ must be manually specified in this case.
+
+ It is explained in section 3.3 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You might also want to
+ read the file <file:Documentation/scsi/aha152x.rst>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aha152x.
+
+config SCSI_AHA1542
+ tristate "Adaptec AHA1542 support"
+ depends on ISA && SCSI && ISA_DMA_API
+ help
+ This is support for a SCSI host adapter. It is explained in section
+ 3.4 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that Trantor was
+ purchased by Adaptec, and some former Trantor products are being
+ sold under the Adaptec name. If it doesn't work out of the box, you
+ may have to change some settings in <file:drivers/scsi/aha1542.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aha1542.
+
+config SCSI_AHA1740
+ tristate "Adaptec AHA1740 support"
+ depends on EISA && SCSI
+ help
+ This is support for a SCSI host adapter. It is explained in section
+ 3.5 of the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. If it doesn't work out
+ of the box, you may have to change some settings in
+ <file:drivers/scsi/aha1740.h>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aha1740.
+
+config SCSI_AACRAID
+ tristate "Adaptec AACRAID support"
+ depends on SCSI && PCI
+ help
+ This driver supports a variety of Dell, HP, Adaptec, IBM and
+ ICP storage products. For a list of supported products, refer
+ to <file:Documentation/scsi/aacraid.rst>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called aacraid.
+
+
+source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
+source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
+source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/hisi_sas/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
+
+config SCSI_MVUMI
+ tristate "Marvell UMI driver"
+ depends on SCSI && PCI
+ help
+ Module for Marvell Universal Message Interface(UMI) driver
+
+ To compile this driver as a module, choose M here: the
+ module will be called mvumi.
+
+config SCSI_ADVANSYS
+ tristate "AdvanSys SCSI support"
+ depends on SCSI
+ depends on ISA || EISA || PCI
+ depends on ISA_DMA_API || !ISA
+ help
+ This is a driver for all SCSI host adapters manufactured by
+ AdvanSys. It is documented in the kernel source in
+ <file:drivers/scsi/advansys.c>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called advansys.
+
+config SCSI_ARCMSR
+ tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
+ depends on PCI && SCSI
+ help
+ This driver supports all of ARECA's SATA/SAS RAID controller cards.
+ This is an ARECA-maintained driver by Erich Chen.
+ If you have any problems, please mail to: <erich@areca.com.tw>.
+ Areca supports Linux RAID config tools.
+ Please link <http://www.areca.com.tw>
+
+ To compile this driver as a module, choose M here: the
+ module will be called arcmsr (modprobe arcmsr).
+
+source "drivers/scsi/esas2r/Kconfig"
+source "drivers/scsi/megaraid/Kconfig.megaraid"
+source "drivers/scsi/mpt3sas/Kconfig"
+source "drivers/scsi/mpi3mr/Kconfig"
+source "drivers/scsi/smartpqi/Kconfig"
+
+config SCSI_HPTIOP
+ tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
+ depends on SCSI && PCI
+ help
+ This option enables support for HighPoint RocketRAID 3xxx/4xxx
+ controllers.
+
+ To compile this driver as a module, choose M here; the module
+ will be called hptiop. If unsure, say N.
+
+config SCSI_BUSLOGIC
+ tristate "BusLogic SCSI support"
+ depends on PCI && SCSI
+ help
+ This is support for BusLogic MultiMaster and FlashPoint SCSI Host
+ Adapters. Consult the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, and the files
+ <file:Documentation/scsi/BusLogic.rst> and
+ <file:Documentation/scsi/FlashPoint.rst> for more information.
+ Note that support for FlashPoint is only available for 32-bit
+ x86 configurations.
+
+ To compile this driver as a module, choose M here: the
+ module will be called BusLogic.
+
+config SCSI_FLASHPOINT
+ bool "FlashPoint support"
+ depends on SCSI_BUSLOGIC && PCI
+ help
+ This option allows you to add FlashPoint support to the
+ BusLogic SCSI driver. The FlashPoint SCCB Manager code is
+ substantial, so users of MultiMaster Host Adapters may not
+ wish to include it.
+
+config SCSI_MYRB
+ tristate "Mylex DAC960/DAC1100 PCI RAID Controller (Block Interface)"
+ depends on PCI
+ select RAID_ATTRS
+ help
+ This driver adds support for the Mylex DAC960, AcceleRAID, and
+ eXtremeRAID PCI RAID controllers. This driver supports the
+ older, block based interface.
+ This driver is a reimplementation of the original DAC960
+ driver. If you have used the DAC960 driver you should enable
+ this module.
+
+ To compile this driver as a module, choose M here: the
+ module will be called myrb.
+
+config SCSI_MYRS
+ tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
+ depends on PCI
+ depends on !CPU_BIG_ENDIAN || COMPILE_TEST
+ select RAID_ATTRS
+ help
+ This driver adds support for the Mylex DAC960, AcceleRAID, and
+ eXtremeRAID PCI RAID controllers. This driver supports the
+ newer, SCSI-based interface only.
+ This driver is a reimplementation of the original DAC960
+ driver. If you have used the DAC960 driver you should enable
+ this module.
+
+ To compile this driver as a module, choose M here: the
+ module will be called myrs.
+
+config VMWARE_PVSCSI
+ tristate "VMware PVSCSI driver support"
+ depends on PCI && SCSI && X86
+ help
+ This driver supports VMware's para virtualized SCSI HBA.
+ To compile this driver as a module, choose M here: the
+ module will be called vmw_pvscsi.
+
+config XEN_SCSI_FRONTEND
+ tristate "XEN SCSI frontend driver"
+ depends on SCSI && XEN
+ select XEN_XENBUS_FRONTEND
+ help
+ The XEN SCSI frontend driver allows the kernel to access SCSI Devices
+ within another guest OS (usually Dom0).
+ Only needed if the kernel is running in a XEN guest and generic
+ SCSI access to a device is needed.
+
+config HYPERV_STORAGE
+ tristate "Microsoft Hyper-V virtual storage driver"
+ depends on SCSI && HYPERV
+ depends on m || SCSI_FC_ATTRS != m
+ default HYPERV
+ help
+ Select this option to enable the Hyper-V virtual storage driver.
+
+config LIBFC
+ tristate "LibFC module"
+ depends on SCSI_FC_ATTRS
+ select CRC32
+ help
+ Fibre Channel library module
+
+config LIBFCOE
+ tristate "LibFCoE module"
+ depends on LIBFC
+ help
+ Library for Fibre Channel over Ethernet module
+
+config FCOE
+ tristate "FCoE module"
+ depends on PCI
+ depends on LIBFCOE
+ help
+ Fibre Channel over Ethernet module
+
+config FCOE_FNIC
+ tristate "Cisco FNIC Driver"
+ depends on PCI && X86
+ depends on LIBFCOE
+ help
+ This is support for the Cisco PCI-Express FCoE HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>.
+ The module will be called fnic.
+
+config SCSI_SNIC
+ tristate "Cisco SNIC Driver"
+ depends on PCI && SCSI
+ help
+ This is support for the Cisco PCI-Express SCSI HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.rst>.
+ The module will be called snic.
+
+config SCSI_SNIC_DEBUG_FS
+ bool "Cisco SNIC Driver Debugfs Support"
+ depends on SCSI_SNIC && DEBUG_FS
+ help
+ This enables to list debugging information from SNIC Driver
+ available via debugfs file system
+
+config SCSI_DMX3191D
+ tristate "DMX3191D SCSI support"
+ depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is support for Domex DMX3191D SCSI Host Adapters.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dmx3191d.
+
+config SCSI_FDOMAIN
+ tristate
+ depends on SCSI
+
+config SCSI_FDOMAIN_PCI
+ tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
+ depends on PCI && SCSI
+ select SCSI_FDOMAIN
+ help
+ This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
+ and other adapters with PCI bus based on the Future Domain chipsets
+ (Adaptec AHA-2920A).
+
+ NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
+ and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
+ controller support"). This Future Domain driver works with the older
+ Adaptec AHA-2920A boards with a Future Domain chip on them.
+
+ To compile this driver as a module, choose M here: the
+ module will be called fdomain_pci.
+
+config SCSI_FDOMAIN_ISA
+ tristate "Future Domain 16xx ISA SCSI support"
+ depends on ISA && SCSI
+ select CHECK_SIGNATURE
+ select SCSI_FDOMAIN
+ help
+ This is support for Future Domain's 16-bit SCSI host adapters
+ (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters
+ with ISA bus based on the Future Domain chipsets (Quantum ISA-200S,
+ ISA-250MG; and at least one IBM board).
+
+ To compile this driver as a module, choose M here: the
+ module will be called fdomain_isa.
+
+config SCSI_ISCI
+ tristate "Intel(R) C600 Series Chipset SAS Controller"
+ depends on PCI && SCSI
+ depends on X86
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports the 6Gb/s SAS capabilities of the storage
+ control unit found in the Intel(R) C600 series chipset.
+
+config SCSI_GENERIC_NCR5380
+ tristate "Generic NCR5380/53c400 SCSI ISA card support"
+ depends on ISA && SCSI && HAS_IOPORT_MAP
+ select SCSI_SPI_ATTRS
+ help
+ This is a driver for old ISA card SCSI controllers based on a
+ NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
+ Most boards such as the Trantor T130 fit this category, as do
+ various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
+
+ To compile this driver as a module, choose M here: the
+ module will be called g_NCR5380.
+
+config SCSI_IPS
+ tristate "IBM ServeRAID support"
+ depends on PCI && SCSI
+ help
+ This is support for the IBM ServeRAID hardware RAID controllers.
+ See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
+ and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
+ for more information. If this driver does not work correctly
+ without modification please contact the author by email at
+ <ipslinux@adaptec.com>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ips.
+
+config SCSI_IBMVSCSI
+ tristate "IBM Virtual SCSI support"
+ depends on PPC_PSERIES
+ select SCSI_SRP_ATTRS
+ help
+ This is the IBM POWER Virtual SCSI Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvscsi.
+
+config SCSI_IBMVSCSIS
+ tristate "IBM Virtual SCSI Server support"
+ depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
+ help
+ This is the IBM POWER Virtual SCSI Target Server
+ This driver uses the SRP protocol for communication between servers
+ guest and/or the host that run on the same server.
+ More information on VSCSI protocol can be found at www.power.org
+
+ The userspace configuration needed to initialize the driver can be
+ be found here:
+
+ https://github.com/powervm/ibmvscsis/wiki/Configuration
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvscsis.
+
+config SCSI_IBMVFC
+ tristate "IBM Virtual FC support"
+ depends on PPC_PSERIES && SCSI
+ depends on SCSI_FC_ATTRS
+ help
+ This is the IBM POWER Virtual FC Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvfc.
+
+config SCSI_IBMVFC_TRACE
+ bool "enable driver internal trace"
+ depends on SCSI_IBMVFC
+ default y
+ help
+ If you say Y here, the driver will trace all commands issued
+ to the adapter. Performance impact is minimal. Trace can be
+ dumped using /sys/class/scsi_host/hostXX/trace.
+
+config SCSI_INITIO
+ tristate "Initio 9100U(W) support"
+ depends on PCI && SCSI
+ help
+ This is support for the Initio 91XXU(W) SCSI host adapter. Please
+ read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called initio.
+
+config SCSI_INIA100
+ tristate "Initio INI-A100U2W support"
+ depends on PCI && SCSI
+ help
+ This is support for the Initio INI-A100U2W SCSI host adapter.
+ Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a100u2w.
+
+config SCSI_PPA
+ tristate "IOMEGA parallel port (ppa - older drives)"
+ depends on SCSI && PARPORT_PC
+ help
+ This driver supports older versions of IOMEGA's parallel port ZIP
+ drive (a 100 MB removable media device).
+
+ Note that you can say N here if you have the SCSI version of the ZIP
+ drive: it will be supported automatically if you said Y to the
+ generic "SCSI disk support", above.
+
+ If you have the ZIP Plus drive or a more recent parallel port ZIP
+ drive (if the supplied cable with the drive is labeled "AutoDetect")
+ then you should say N here and Y to "IOMEGA parallel port (imm -
+ newer drives)", below.
+
+ For more information about this driver and how to use it you should
+ read the file <file:Documentation/scsi/ppa.rst>. You should also read
+ the SCSI-HOWTO, which is available from
+ <http://www.tldp.org/docs.html#howto>. If you use this driver,
+ you will still be able to use the parallel port for other tasks,
+ such as a printer; it is safe to compile both drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ppa.
+
+config SCSI_IMM
+ tristate "IOMEGA parallel port (imm - newer drives)"
+ depends on SCSI && PARPORT_PC
+ help
+ This driver supports newer versions of IOMEGA's parallel port ZIP
+ drive (a 100 MB removable media device).
+
+ Note that you can say N here if you have the SCSI version of the ZIP
+ drive: it will be supported automatically if you said Y to the
+ generic "SCSI disk support", above.
+
+ If you have the ZIP Plus drive or a more recent parallel port ZIP
+ drive (if the supplied cable with the drive is labeled "AutoDetect")
+ then you should say Y here; if you have an older ZIP drive, say N
+ here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
+
+ For more information about this driver and how to use it you should
+ read the file <file:Documentation/scsi/ppa.rst>. You should also read
+ the SCSI-HOWTO, which is available from
+ <http://www.tldp.org/docs.html#howto>. If you use this driver,
+ you will still be able to use the parallel port for other tasks,
+ such as a printer; it is safe to compile both drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imm.
+
+config SCSI_IZIP_EPP16
+ bool "ppa/imm option - Use slow (but safe) EPP-16"
+ depends on SCSI_PPA || SCSI_IMM
+ help
+ EPP (Enhanced Parallel Port) is a standard for parallel ports which
+ allows them to act as expansion buses that can handle up to 64
+ peripheral devices.
+
+ Some parallel port chipsets are slower than their motherboard, and
+ so we have to control the state of the chipset's FIFO queue every
+ now and then to avoid data loss. This will be done if you say Y
+ here.
+
+ Generally, saying Y is the safe option and slows things down a bit.
+
+config SCSI_IZIP_SLOW_CTR
+ bool "ppa/imm option - Assume slow parport control register"
+ depends on SCSI_PPA || SCSI_IMM
+ help
+ Some parallel ports are known to have excessive delays between
+ changing the parallel port control register and good data being
+ available on the parallel port data/status register. This option
+ forces a small delay (1.0 usec to be exact) after changing the
+ control register to let things settle out. Enabling this option may
+ result in a big drop in performance but some very old parallel ports
+ (found in 386 vintage machines) will not work properly.
+
+ Generally, saying N is fine.
+
+config SCSI_LASI700
+ tristate "HP Lasi SCSI support for 53c700/710"
+ depends on GSC && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is a driver for the SCSI controller in the Lasi chip found in
+ many PA-RISC workstations & servers. If you do not know whether you
+ have a Lasi chip, it is safe to say "Y" here.
+
+config SCSI_SNI_53C710
+ tristate "SNI RM SCSI support for 53c710"
+ depends on SNI_RM && SCSI
+ select SCSI_SPI_ATTRS
+ select 53C700_LE_ON_BE
+ help
+ This is a driver for the onboard SCSI controller found in older
+ SNI RM workstations & servers.
+
+config 53C700_LE_ON_BE
+ bool
+ depends on SCSI_LASI700 || SCSI_SNI_53C710
+ default y
+
+config SCSI_STEX
+ tristate "Promise SuperTrak EX Series support"
+ depends on PCI && SCSI
+ help
+ This driver supports Promise SuperTrak EX series storage controllers.
+
+ Promise provides Linux RAID configuration utility for these
+ controllers. Please visit <http://www.promise.com> to download.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stex.
+
+config 53C700_BE_BUS
+ bool
+ depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
+ default y
+
+config SCSI_SYM53C8XX_2
+ tristate "SYM53C8XX Version 2 SCSI support"
+ depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This driver supports the whole NCR53C8XX/SYM53C8XX family of
+ PCI-SCSI controllers. It also supports the subset of LSI53C10XX
+ Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
+ language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
+ controllers; you need to use the Fusion MPT driver for that.
+
+ Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more
+ information.
+
+config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
+ int "DMA addressing mode"
+ depends on SCSI_SYM53C8XX_2
+ default "1"
+ help
+ This option only applies to PCI-SCSI chips that are PCI DAC
+ capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
+
+ When set to 0, the driver will program the chip to only perform
+ 32-bit DMA. When set to 1, the chip will be able to perform DMA
+ to addresses up to 1TB. When set to 2, the driver supports the
+ full 64-bit DMA address range, but can only address 16 segments
+ of 4 GB each. This limits the total addressable range to 64 GB.
+
+ Most machines with less than 4GB of memory should use a setting
+ of 0 for best performance. If your machine has 4GB of memory
+ or more, you should set this option to 1 (the default).
+
+ The still experimental value 2 (64 bit DMA addressing with 16
+ x 4GB segments limitation) can be used on systems that require
+ PCI address bits past bit 39 to be set for the addressing of
+ memory using PCI DAC cycles.
+
+config SCSI_SYM53C8XX_DEFAULT_TAGS
+ int "Default tagged command queue depth"
+ depends on SCSI_SYM53C8XX_2
+ default "16"
+ help
+ This is the default value of the command queue depth the
+ driver will announce to the generic SCSI layer for devices
+ that support tagged command queueing. This value can be changed
+ from the boot command line. This is a soft limit that cannot
+ exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
+
+config SCSI_SYM53C8XX_MAX_TAGS
+ int "Maximum number of queued commands"
+ depends on SCSI_SYM53C8XX_2
+ default "64"
+ help
+ This option allows you to specify the maximum number of commands
+ that can be queued to any device, when tagged command queuing is
+ possible. The driver supports up to 256 queued commands per device.
+ This value is used as a compiled-in hard limit.
+
+config SCSI_SYM53C8XX_MMIO
+ bool "Use memory mapped IO"
+ depends on SCSI_SYM53C8XX_2
+ default y
+ help
+ Memory mapped IO is faster than Port IO. Most people should
+ answer Y here, but some machines may have problems. If you have
+ to answer N here, please report the problem to the maintainer.
+
+config SCSI_IPR
+ tristate "IBM Power Linux RAID adapter support"
+ depends on PCI && SCSI && ATA
+ select SATA_HOST
+ select FW_LOADER
+ select IRQ_POLL
+ select SGL_ALLOC
+ help
+ This driver supports the IBM Power Linux family RAID adapters.
+ This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
+ as IBM iSeries 5702, 5703, 5709, and 570A.
+
+config SCSI_IPR_TRACE
+ bool "enable driver internal trace"
+ depends on SCSI_IPR
+ default y
+ help
+ If you say Y here, the driver will trace all commands issued
+ to the adapter. Performance impact is minimal. Trace can be
+ dumped using /sys/bus/class/scsi_host/hostXX/trace.
+
+config SCSI_IPR_DUMP
+ bool "enable adapter dump support"
+ depends on SCSI_IPR
+ default y
+ help
+ If you say Y here, the driver will support adapter crash dump.
+ If you enable this support, the iprdump daemon can be used
+ to capture adapter failure analysis information.
+
+config SCSI_ZALON
+ tristate "Zalon SCSI support"
+ depends on GSC && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ The Zalon is a GSC/HSC bus interface chip that sits between the
+ PA-RISC processor and the NCR 53c720 SCSI controller on C100,
+ C110, J200, J210 and some D, K & R-class machines. It's also
+ used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
+ Say Y here if you have one of these machines or cards.
+
+config SCSI_NCR53C8XX_DEFAULT_TAGS
+ int "default tagged command queue depth"
+ depends on SCSI_ZALON
+ default "8"
+ help
+ "Tagged command queuing" is a feature of SCSI-2 which improves
+ performance: the host adapter can send several SCSI commands to a
+ device's queue even if previous commands haven't finished yet.
+ Because the device is intelligent, it can optimize its operations
+ (like head positioning) based on its own request queue. Some SCSI
+ devices don't implement this properly; if you want to disable this
+ feature, enter 0 or 1 here (it doesn't matter which).
+
+ The default value is 8 and should be supported by most hard disks.
+ This value can be overridden from the boot command line using the
+ 'tags' option as follows (example):
+ 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
+ 4, set queue depth to 16 for target 2 and target 3 on controller 0
+ and set queue depth to 10 for target 0 / lun 2 on controller 1.
+
+ The normal answer therefore is to go with the default 8 and to use
+ a boot command line option for devices that need to use a different
+ command queue depth.
+
+ There is no safe option other than using good SCSI devices.
+
+config SCSI_NCR53C8XX_MAX_TAGS
+ int "maximum number of queued commands"
+ depends on SCSI_ZALON
+ default "32"
+ help
+ This option allows you to specify the maximum number of commands
+ that can be queued to any device, when tagged command queuing is
+ possible. The default value is 32. Minimum is 2, maximum is 64.
+ Modern hard disks are able to support 64 tags and even more, but
+ do not seem to be faster when more than 32 tags are being used.
+
+ So, the normal answer here is to go with the default value 32 unless
+ you are using very large hard disks with large cache (>= 1 MB) that
+ are able to take advantage of more than 32 tagged commands.
+
+ There is no safe option and the default answer is recommended.
+
+config SCSI_NCR53C8XX_SYNC
+ int "synchronous transfers frequency in MHz"
+ depends on SCSI_ZALON
+ default "20"
+ help
+ The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
+ rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
+ are respectively the maximum data transfer rates in mega-transfers
+ per second for each class. For example, a FAST-20 Wide 16 device is
+ able to transfer data at 20 million 16 bit packets per second for a
+ total rate of 40 MB/s.
+
+ You may specify 0 if you want to only use asynchronous data
+ transfers. This is the safest and slowest option. Otherwise, specify
+ a value between 5 and 80, depending on the capability of your SCSI
+ controller. The higher the number, the faster the data transfer.
+ Note that 80 should normally be ok since the driver decreases the
+ value automatically according to the controller's capabilities.
+
+ Your answer to this question is ignored for controllers with NVRAM,
+ since the driver will get this information from the user set-up. It
+ also can be overridden using a boot setup option, as follows
+ (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
+ for FAST-20 synchronous data transfer (20 mega-transfers per
+ second).
+
+ The normal answer therefore is not to go with the default but to
+ select the maximum value 80 allowing the driver to use the maximum
+ value supported by each controller. If this causes problems with
+ your SCSI devices, you should come back and decrease the value.
+
+ There is no safe option other than using good cabling, right
+ terminations and SCSI conformant devices.
+
+config SCSI_NCR53C8XX_NO_DISCONNECT
+ bool "not allow targets to disconnect"
+ depends on SCSI_ZALON && SCSI_NCR53C8XX_DEFAULT_TAGS=0
+ help
+ This option is only provided for safety if you suspect some SCSI
+ device of yours to not support properly the target-disconnect
+ feature. In that case, you would say Y here. In general however, to
+ not allow targets to disconnect is not reasonable if there is more
+ than 1 device on a SCSI bus. The normal answer therefore is N.
+
+config SCSI_QLOGIC_FAS
+ tristate "Qlogic FAS SCSI support"
+ depends on ISA && SCSI
+ help
+ This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
+ FastSCSI! cards as well as any other card based on the FASXX chip
+ (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
+
+ This driver does NOT support the PCI versions of these cards. The
+ PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
+ SCSI support"), below.
+
+ Information about this driver is contained in
+ <file:Documentation/scsi/qlogicfas.rst>. You should also read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qlogicfas.
+
+config SCSI_QLOGIC_1280
+ tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
+ depends on PCI && SCSI
+ help
+ Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qla1280.
+
+config SCSI_QLOGICPTI
+ tristate "PTI Qlogic, ISP Driver"
+ depends on SBUS && SCSI
+ help
+ This driver supports SBUS SCSI controllers from PTI or QLogic. These
+ controllers are known under Solaris as qpti and in the openprom as
+ PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
+ driven by a different driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qlogicpti.
+
+source "drivers/scsi/qla2xxx/Kconfig"
+source "drivers/scsi/qla4xxx/Kconfig"
+source "drivers/scsi/qedi/Kconfig"
+source "drivers/scsi/qedf/Kconfig"
+
+config SCSI_LPFC
+ tristate "Emulex LightPulse Fibre Channel Support"
+ depends on PCI && SCSI
+ depends on CPU_FREQ
+ depends on SCSI_FC_ATTRS
+ depends on NVME_TARGET_FC || NVME_TARGET_FC=n
+ depends on NVME_FC || NVME_FC=n
+ select CRC_T10DIF
+ select IRQ_POLL
+ help
+ This lpfc driver supports the Emulex LightPulse
+ Family of Fibre Channel PCI host adapters.
+
+config SCSI_LPFC_DEBUG_FS
+ bool "Emulex LightPulse Fibre Channel debugfs Support"
+ depends on SCSI_LPFC && DEBUG_FS
+ help
+ This makes debugging information from the lpfc driver
+ available via the debugfs filesystem.
+
+source "drivers/scsi/elx/Kconfig"
+
+config SCSI_SIM710
+ tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
+ depends on EISA && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This driver is for NCR53c710 based SCSI host adapters.
+
+ It currently supports Compaq EISA cards.
+
+config SCSI_DC395x
+ tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
+ depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This driver supports PCI SCSI host adapters based on the ASIC
+ TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
+
+ This driver works, but is still in experimental status. So better
+ have a bootable disk and a backup in case of emergency.
+
+ Documentation can be found in <file:Documentation/scsi/dc395x.rst>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dc395x.
+
+config SCSI_AM53C974
+ tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
+ depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This driver supports PCI SCSI host adapters based on the Am53C974A
+ chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
+ PCscsi/PCnet (Am53/79C974) solutions.
+ This is a new implementation base on the generic esp_scsi driver.
+
+ Note that this driver does NOT support Tekram DC390W/U/F, which are
+ based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
+
+ To compile this driver as a module, choose M here: the
+ module will be called am53c974.
+
+config SCSI_NSP32
+ tristate "Workbit NinjaSCSI-32Bi/UDE support"
+ depends on PCI && SCSI && !64BIT
+ help
+ This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
+ SCSI host adapter. Please read the SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nsp32.
+
+config SCSI_WD719X
+ tristate "Western Digital WD7193/7197/7296 support"
+ depends on PCI && SCSI
+ select EEPROM_93CX6
+ help
+ This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
+ SCSI controllers (based on WD33C296A chip).
+
+config SCSI_DEBUG
+ tristate "SCSI debugging host and device simulator"
+ depends on SCSI
+ select CRC_T10DIF
+ help
+ This pseudo driver simulates one or more hosts (SCSI initiators),
+ each with one or more targets, each with one or more logical units.
+ Defaults to one of each, creating a small RAM disk device. Many
+ parameters found in the /sys/bus/pseudo/drivers/scsi_debug
+ directory can be tweaked at run time.
+ See <http://sg.danny.cz/sg/sdebug26.html> for more information.
+ Mainly used for testing and best as a module. If unsure, say N.
+
+config SCSI_MESH
+ tristate "MESH (Power Mac internal SCSI) support"
+ depends on PPC32 && PPC_PMAC && SCSI
+ help
+ Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
+ SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
+ other Power Macintoshes do). Say Y to include support for this SCSI
+ adaptor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mesh.
+
+config SCSI_MESH_SYNC_RATE
+ int "maximum synchronous transfer rate (MB/s) (0 = async)"
+ depends on SCSI_MESH
+ default "5"
+ help
+ On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
+ drives a bus which is entirely internal to the machine (such as the
+ 7500, 7600, 8500, etc.), the MESH is capable of synchronous
+ operation at up to 10 MB/s. On machines where the SCSI bus
+ controlled by the MESH can have external devices connected, it is
+ usually rated at 5 MB/s. 5 is a safe value here unless you know the
+ MESH SCSI bus is internal only; in that case you can say 10. Say 0
+ to disable synchronous operation.
+
+config SCSI_MESH_RESET_DELAY_MS
+ int "initial bus reset delay (ms) (0 = no reset)"
+ depends on SCSI_MESH
+ default "4000"
+
+config SCSI_MAC53C94
+ tristate "53C94 (Power Mac external SCSI) support"
+ depends on PPC32 && PPC_PMAC && SCSI
+ help
+ On Power Macintoshes (and clones) with two SCSI buses, the external
+ SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
+ machines which only have one SCSI bus, such as the 7200, also use
+ the 53C94. Say Y to include support for the 53C94.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mac53c94.
+
+source "drivers/scsi/arm/Kconfig"
+
+config JAZZ_ESP
+ bool "MIPS JAZZ FAS216 SCSI support"
+ depends on MACH_JAZZ && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is the driver for the onboard SCSI host adapter of MIPS Magnum
+ 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
+ systems.
+
+config A3000_SCSI
+ tristate "A3000 WD33C93A support"
+ depends on AMIGA && SCSI
+ help
+ If you have an Amiga 3000 and have SCSI devices connected to the
+ built-in SCSI controller, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a3000.
+
+config A2091_SCSI
+ tristate "A2091/A590 WD33C93A support"
+ depends on ZORRO && SCSI
+ help
+ If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a2091.
+
+config GVP11_SCSI
+ tristate "GVP Series II WD33C93A support"
+ depends on ZORRO && SCSI
+ help
+ If you have a Great Valley Products Series II SCSI controller,
+ answer Y. Also say Y if you have a later model of GVP SCSI
+ controller (such as the GVP A4008 or a Combo board). Otherwise,
+ answer N. This driver does NOT work for the T-Rex series of
+ accelerators from TekMagic and GVP-M.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gvp11.
+
+config SCSI_A4000T
+ tristate "A4000T NCR53c710 SCSI support"
+ depends on AMIGA && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ If you have an Amiga 4000T and have SCSI devices connected to the
+ built-in SCSI controller, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a4000t.
+
+config SCSI_ZORRO7XX
+ tristate "Zorro NCR53c710 SCSI support"
+ depends on ZORRO && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ Support for various NCR53c710-based SCSI controllers on Zorro
+ expansion boards for the Amiga.
+ This includes:
+ - the Amiga 4091 Zorro III SCSI-2 controller,
+ - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
+ (info at
+ <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
+ - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
+ accelerator card for the Amiga 1200,
+ - the SCSI controller on the GVP Turbo 040/060 accelerator.
+
+config SCSI_ZORRO_ESP
+ tristate "Zorro ESP SCSI support"
+ depends on ZORRO && SCSI
+ select SCSI_SPI_ATTRS
+ select SCSI_ESP_PIO
+ help
+ Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
+ expansion boards for the Amiga.
+ This includes:
+ - the Phase5 Blizzard 1230 II and IV SCSI controllers,
+ - the Phase5 Blizzard 2060 SCSI controller,
+ - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI
+ controllers,
+ - the Fastlane Zorro III SCSI controller.
+
+config ATARI_SCSI
+ tristate "Atari native SCSI support"
+ depends on ATARI && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ If you have an Atari with built-in NCR5380 SCSI controller (TT,
+ Falcon, ...) say Y to get it supported. Of course also, if you have
+ a compatible SCSI controller (e.g. for Medusa).
+
+ To compile this driver as a module, choose M here: the module will
+ be called atari_scsi. If you also enable NVRAM support, the SCSI
+ host's ID is taken from the setting in TT RTC NVRAM.
+
+ This driver supports both styles of NCR integration into the
+ system: the TT style (separate DMA), and the Falcon style (via
+ ST-DMA, replacing ACSI). It does NOT support other schemes, like
+ in the Hades (without DMA).
+
+config MAC_SCSI
+ tristate "Macintosh NCR5380 SCSI"
+ depends on MAC && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is the NCR 5380 SCSI controller included on most of the 68030
+ based Macintoshes. If you have one of these say Y and read the
+ SCSI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config SCSI_MAC_ESP
+ tristate "Macintosh NCR53c9[46] SCSI"
+ depends on MAC && SCSI
+ select SCSI_SPI_ATTRS
+ select SCSI_ESP_PIO
+ help
+ This is the NCR 53c9x SCSI controller found on most of the 68040
+ based Macintoshes.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mac_esp.
+
+config MVME147_SCSI
+ bool "WD33C93 SCSI driver for MVME147"
+ depends on MVME147 && SCSI=y
+ select SCSI_SPI_ATTRS
+ help
+ Support for the on-board SCSI controller on the Motorola MVME147
+ single-board computer.
+
+config MVME16x_SCSI
+ tristate "NCR53C710 SCSI driver for MVME16x"
+ depends on MVME16x && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
+ SCSI controller chip. Almost everyone using one of these boards
+ will want to say Y to this question.
+
+config BVME6000_SCSI
+ tristate "NCR53C710 SCSI driver for BVME6000"
+ depends on BVME6000 && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
+ SCSI controller chip. Almost everyone using one of these boards
+ will want to say Y to this question.
+
+config SUN3_SCSI
+ tristate "Sun3 NCR5380 SCSI"
+ depends on SUN3 && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This option will enable support for the OBIO (onboard io) NCR5380
+ SCSI controller found in the Sun 3/50 and 3/60, as well as for
+ "Sun3" type VME scsi controllers also based on the NCR5380.
+ General Linux information on the Sun 3 series (now discontinued)
+ is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+config SUN3X_ESP
+ bool "Sun3x ESP SCSI"
+ depends on SUN3X && SCSI=y
+ select SCSI_SPI_ATTRS
+ help
+ The ESP was an on-board SCSI controller used on Sun 3/80
+ machines. Say Y here to compile in support for it.
+
+config SCSI_SUNESP
+ tristate "Sparc ESP Scsi Driver"
+ depends on SBUS && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This is the driver for the Sun ESP SCSI host adapter. The ESP
+ chipset is present in most SPARC SBUS-based computers and
+ supports the Emulex family of ESP SCSI chips (esp100, esp100A,
+ esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sun_esp.
+
+config ZFCP
+ tristate "FCP host bus adapter driver for IBM mainframes"
+ depends on S390 && QDIO && SCSI
+ depends on SCSI_FC_ATTRS
+ help
+ If you want to access SCSI devices attached to your IBM mainframe by
+ means of Fibre Channel Protocol host bus adapters say Y.
+
+ Supported HBAs include different models of the FICON Express and FCP
+ Express I/O cards.
+
+ For a more complete list, and for more details about setup and
+ operation refer to the IBM publication "Device Drivers, Features, and
+ Commands", SC33-8411.
+
+ This driver is also available as a module. This module will be
+ called zfcp. If you want to compile it as a module, say M here
+ and read <file:Documentation/kbuild/modules.rst>.
+
+config SCSI_PMCRAID
+ tristate "PMC SIERRA Linux MaxRAID adapter support"
+ depends on PCI && SCSI && NET
+ select SGL_ALLOC
+ help
+ This driver supports the PMC SIERRA MaxRAID adapters.
+
+config SCSI_PM8001
+ tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
+ depends on PCI && SCSI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
+ based host adapters.
+
+config SCSI_BFA_FC
+ tristate "Brocade BFA Fibre Channel Support"
+ depends on PCI && SCSI
+ depends on SCSI_FC_ATTRS
+ help
+ This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
+
+ To compile this driver as a module, choose M here. The module will
+ be called bfa.
+
+config SCSI_VIRTIO
+ tristate "virtio-scsi support"
+ depends on VIRTIO
+ help
+ This is the virtual HBA driver for virtio. If the kernel will
+ be used in a virtual machine, say Y or M.
+
+source "drivers/scsi/csiostor/Kconfig"
+
+source "drivers/scsi/pcmcia/Kconfig"
+
+endif # SCSI_LOWLEVEL
+
+source "drivers/scsi/device_handler/Kconfig"
+
+endmenu