Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 732 insertions, 0 deletions

diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
new file mode 100644
index 000000000..3fe34cb96
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -0,0 +1,732 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Aic94xx SAS/SATA driver SAS definitions and hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ */
+
+#ifndef _AIC94XX_SAS_H_
+#define _AIC94XX_SAS_H_
+
+#include <scsi/libsas.h>
+
+/* ---------- DDBs ---------- */
+/* DDBs are device descriptor blocks which describe a device in the
+ * domain that this sequencer can maintain low-level connections for
+ * us.  They are be 64 bytes.
+ */
+#define ASD_MAX_DDBS	128
+
+struct asd_ddb_ssp_smp_target_port {
+	u8     conn_type;	  /* byte 0 */
+#define DDB_TP_CONN_TYPE 0x81	  /* Initiator port and addr frame type 0x01 */
+
+	u8     conn_rate;
+	__be16 init_conn_tag;
+	u8     dest_sas_addr[8];  /* bytes 4-11 */
+
+	__le16 send_queue_head;
+	u8     sq_suspended;
+	u8     ddb_type;	  /* DDB_TYPE_TARGET */
+#define DDB_TYPE_UNUSED    0xFF
+#define DDB_TYPE_TARGET    0xFE
+#define DDB_TYPE_INITIATOR 0xFD
+#define DDB_TYPE_PM_PORT   0xFC
+
+	__le16 _r_a;
+	__be16 awt_def;
+
+	u8     compat_features;	  /* byte 20 */
+	u8     pathway_blocked_count;
+	__be16 arb_wait_time;
+	__be32 more_compat_features; /* byte 24 */
+
+	u8     conn_mask;
+	u8     flags;	  /* concurrent conn:2,2 and open:0(1) */
+#define CONCURRENT_CONN_SUPP 0x04
+#define OPEN_REQUIRED        0x01
+
+	u16    _r_b;
+	__le16 exec_queue_tail;
+	__le16 send_queue_tail;
+	__le16 sister_ddb;
+
+	__le16 _r_c;
+
+	u8     max_concurrent_conn;
+	u8     num_concurrent_conn;
+	u8     num_contexts;
+
+	u8     _r_d;
+
+	__le16 active_task_count;
+
+	u8     _r_e[9];
+
+	u8     itnl_reason;	  /* I_T nexus loss reason */
+
+	__le16 _r_f;
+
+	__le16 itnl_timeout;
+#define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */
+
+	__le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+struct asd_ddb_stp_sata_target_port {
+	u8     conn_type;	  /* byte 0 */
+	u8     conn_rate;
+	__be16 init_conn_tag;
+	u8     dest_sas_addr[8];  /* bytes 4-11 */
+
+	__le16 send_queue_head;
+	u8     sq_suspended;
+	u8     ddb_type;	  /* DDB_TYPE_TARGET */
+
+	__le16 _r_a;
+
+	__be16 awt_def;
+	u8     compat_features;	  /* byte 20 */
+	u8     pathway_blocked_count;
+	__be16 arb_wait_time;
+	__be32 more_compat_features; /* byte 24 */
+
+	u8     conn_mask;
+	u8     flags;	  /* concurrent conn:2,2 and open:0(1) */
+#define SATA_MULTIPORT     0x80
+#define SUPPORTS_AFFIL     0x40
+#define STP_AFFIL_POL      0x20
+
+	u8     _r_b;
+	u8     flags2;		  /* STP close policy:0 */
+#define STP_CL_POL_NO_TX    0x00
+#define STP_CL_POL_BTW_CMDS 0x01
+
+	__le16 exec_queue_tail;
+	__le16 send_queue_tail;
+	__le16 sister_ddb;
+	__le16 ata_cmd_scbptr;
+	__le32 sata_tag_alloc_mask;
+	__le16 active_task_count;
+	__le16 _r_c;
+	__le32 sata_sactive;
+	u8     num_sata_tags;
+	u8     sata_status;
+	u8     sata_ending_status;
+	u8     itnl_reason;	  /* I_T nexus loss reason */
+	__le16 ncq_data_scb_ptr;
+	__le16 itnl_timeout;
+	__le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_init_port, describes the device descriptor block
+ * of an initiator port (when the sequencer is operating in target mode).
+ * Bytes [0,11] and [20,27] are from the OPEN address frame.
+ * The sequencer allocates an initiator port DDB entry.
+ */
+struct asd_ddb_init_port {
+	u8     conn_type;	  /* byte 0 */
+	u8     conn_rate;
+	__be16 init_conn_tag;     /* BE */
+	u8     dest_sas_addr[8];
+	__le16 send_queue_head;   /* LE, byte 12 */
+	u8     sq_suspended;
+	u8     ddb_type;	  /* DDB_TYPE_INITIATOR */
+	__le16 _r_a;
+	__be16 awt_def;		  /* BE */
+	u8     compat_features;
+	u8     pathway_blocked_count;
+	__be16 arb_wait_time;	  /* BE */
+	__be32 more_compat_features; /* BE */
+	u8     conn_mask;
+	u8     flags;		  /* == 5 */
+	u16    _r_b;
+	__le16 exec_queue_tail;	  /* execution queue tail */
+	__le16 send_queue_tail;
+	__le16 sister_ddb;
+	__le16 init_resp_timeout; /* initiator response timeout */
+	__le32 _r_c;
+	__le16 active_tasks;	  /* active task count */
+	__le16 init_list;	  /* initiator list link pointer */
+	__le32 _r_d;
+	u8     max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */
+	u8     itnl_reason;	  /* I_T nexus loss reason */
+	__le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */
+	__le16 itnl_to;		  /* from the Protocol Specific Port Ctrl MP */
+	__le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_tag, describes a look-up table to be used
+ * by the sequencers.  SATA II, IDENTIFY DEVICE data, word 76, bit 8:
+ * NCQ support.  This table is used by the sequencers to find the
+ * corresponding SCB, given a SATA II tag value.
+ */
+struct asd_ddb_sata_tag {
+	__le16 scb_pointer[32];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_table, describes a port number to
+ * connection handle look-up table.  SATA targets attached to a port
+ * multiplier require a 4-bit port number value.  There is one DDB
+ * entry of this type for each SATA port multiplier (sister DDB).
+ * Given a SATA PM port number, this table gives us the SATA PM Port
+ * DDB of the SATA port multiplier port (i.e. the SATA target
+ * discovered on the port).
+ */
+struct asd_ddb_sata_pm_table {
+	__le16 ddb_pointer[16];
+	__le16 _r_a[16];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier
+ * port format DDB.
+ */
+struct asd_ddb_sata_pm_port {
+	u8     _r_a[15];
+	u8     ddb_type;
+	u8     _r_b[13];
+	u8     pm_port_flags;
+#define PM_PORT_MASK  0xF0
+#define PM_PORT_SET   0x02
+	u8     _r_c[6];
+	__le16 sister_ddb;
+	__le16 ata_cmd_scbptr;
+	__le32 sata_tag_alloc_mask;
+	__le16 active_task_count;
+	__le16 parent_ddb;
+	__le32 sata_sactive;
+	u8     num_sata_tags;
+	u8     sata_status;
+	u8     sata_ending_status;
+	u8     _r_d[9];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_seq_shared, describes a DDB shared by the
+ * central and link sequencers.  port_map_by_links is indexed phy
+ * number [0,7]; each byte is a bit mask of all the phys that are in
+ * the same port as the indexed phy.
+ */
+struct asd_ddb_seq_shared {
+	__le16 q_free_ddb_head;
+	__le16 q_free_ddb_tail;
+	__le16 q_free_ddb_cnt;
+	__le16 q_used_ddb_head;
+	__le16 q_used_ddb_tail;
+	__le16 shared_mem_lock;
+	__le16 smp_conn_tag;
+	__le16 est_nexus_buf_cnt;
+	__le16 est_nexus_buf_thresh;
+	u32    _r_a;
+	u8     settable_max_contexts;
+	u8     _r_b[23];
+	u8     conn_not_active;
+	u8     phy_is_up;
+	u8     _r_c[8];
+	u8     port_map_by_links[8];
+} __attribute__ ((packed));
+
+/* ---------- SG Element ---------- */
+
+/* This struct sg_el, describes the hardware scatter gather buffer
+ * element.  All entries are little endian.  In an SCB, there are 2 of
+ * this, plus one more, called a link element of this indicating a
+ * sublist if needed.
+ *
+ * A link element has only the bus address set and the flags (DS) bit
+ * valid.  The bus address points to the start of the sublist.
+ *
+ * If a sublist is needed, then that sublist should also include the 2
+ * sg_el embedded in the SCB, in which case next_sg_offset is 32,
+ * since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case.
+ */
+struct sg_el {
+	__le64 bus_addr;
+	__le32 size;
+	__le16 _r;
+	u8     next_sg_offs;
+	u8     flags;
+#define ASD_SG_EL_DS_MASK   0x30
+#define ASD_SG_EL_DS_OCM    0x10
+#define ASD_SG_EL_DS_HM     0x00
+#define ASD_SG_EL_LIST_MASK 0xC0
+#define ASD_SG_EL_LIST_EOL  0x40
+#define ASD_SG_EL_LIST_EOS  0x80
+} __attribute__ ((packed));
+
+/* ---------- SCBs ---------- */
+
+/* An SCB (sequencer control block) is comprised of a common header
+ * and a task part, for a total of 128 bytes.  All fields are in LE
+ * order, unless otherwise noted.
+ */
+
+/* This struct scb_header, defines the SCB header format.
+ */
+struct scb_header {
+	__le64 next_scb;
+	__le16 index;		  /* transaction context */
+	u8     opcode;
+} __attribute__ ((packed));
+
+/* SCB opcodes: Execution queue
+ */
+#define INITIATE_SSP_TASK       0x00
+#define INITIATE_LONG_SSP_TASK  0x01
+#define INITIATE_BIDIR_SSP_TASK 0x02
+#define SCB_ABORT_TASK          0x03
+#define INITIATE_SSP_TMF        0x04
+#define SSP_TARG_GET_DATA       0x05
+#define SSP_TARG_GET_DATA_GOOD  0x06
+#define SSP_TARG_SEND_RESP      0x07
+#define QUERY_SSP_TASK          0x08
+#define INITIATE_ATA_TASK       0x09
+#define INITIATE_ATAPI_TASK     0x0a
+#define CONTROL_ATA_DEV         0x0b
+#define INITIATE_SMP_TASK       0x0c
+#define SMP_TARG_SEND_RESP      0x0f
+
+/* SCB opcodes: Send Queue
+ */
+#define SSP_TARG_SEND_DATA      0x40
+#define SSP_TARG_SEND_DATA_GOOD 0x41
+
+/* SCB opcodes: Link Queue
+ */
+#define CONTROL_PHY             0x80
+#define SEND_PRIMITIVE          0x81
+#define INITIATE_LINK_ADM_TASK  0x82
+
+/* SCB opcodes: other
+ */
+#define EMPTY_SCB               0xc0
+#define INITIATE_SEQ_ADM_TASK   0xc1
+#define EST_ICL_TARG_WINDOW     0xc2
+#define COPY_MEM                0xc3
+#define CLEAR_NEXUS             0xc4
+#define INITIATE_DDB_ADM_TASK   0xc6
+#define ESTABLISH_NEXUS_ESCB    0xd0
+
+#define LUN_SIZE                8
+
+#define EFB_MASK                0x80
+#define TASK_PRIO_MASK          0x78
+#define TASK_ATTR_MASK          0x07
+/* ---------- SCB tasks ---------- */
+
+/* This is both ssp_task and long_ssp_task
+ */
+struct initiate_ssp_task {
+	u8     proto_conn_rate;	  /* proto:6,4, conn_rate:3,0 */
+	__le32 total_xfer_len;
+	struct ssp_frame_hdr  ssp_frame;
+	struct ssp_command_iu ssp_cmd;
+	__le16 sister_scb;	  /* 0xFFFF */
+	__le16 conn_handle;	  /* index to DDB for the intended target */
+	u8     data_dir;	  /* :1,0 */
+#define DATA_DIR_NONE   0x00
+#define DATA_DIR_IN     0x01
+#define DATA_DIR_OUT    0x02
+#define DATA_DIR_BYRECIPIENT 0x03
+
+	u8     _r_a;
+	u8     retry_count;
+	u8     _r_b[5];
+	struct sg_el sg_element[3]; /* 2 real and 1 link */
+} __attribute__ ((packed));
+
+/* This defines both ata_task and atapi_task.
+ * ata: C bit of FIS should be 1,
+ * atapi: C bit of FIS should be 1, and command register should be 0xA0,
+ * to indicate a packet command.
+ */
+struct initiate_ata_task {
+	u8     proto_conn_rate;
+	__le32 total_xfer_len;
+	struct host_to_dev_fis fis;
+	__le32 data_offs;
+	u8     atapi_packet[16];
+	u8     _r_a[12];
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     ata_flags;	  /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */
+#define CSMI_TASK           0x40
+#define DATA_XFER_MODE_DMA  0x10
+#define ATA_Q_TYPE_MASK     0x08
+#define	ATA_Q_TYPE_UNTAGGED 0x00
+#define ATA_Q_TYPE_NCQ      0x08
+
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c;
+	u8     flags;
+#define STP_AFFIL_POLICY   0x20
+#define SET_AFFIL_POLICY   0x10
+#define RET_PARTIAL_SGLIST 0x02
+
+	u8     _r_d[3];
+	struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+struct initiate_smp_task {
+	u8     proto_conn_rate;
+	u8     _r_a[40];
+	struct sg_el smp_req;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     _r_c[8];
+	struct sg_el smp_resp;
+	u8     _r_d[32];
+} __attribute__ ((packed));
+
+struct control_phy {
+	u8     phy_id;
+	u8     sub_func;
+#define DISABLE_PHY            0x00
+#define ENABLE_PHY             0x01
+#define RELEASE_SPINUP_HOLD    0x02
+#define ENABLE_PHY_NO_SAS_OOB  0x03
+#define ENABLE_PHY_NO_SATA_OOB 0x04
+#define PHY_NO_OP              0x05
+#define EXECUTE_HARD_RESET     0x81
+
+	u8     func_mask;
+	u8     speed_mask;
+	u8     hot_plug_delay;
+	u8     port_type;
+	u8     flags;
+#define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01
+#define DISABLE_PHY_IF_OOB_FAILS       0x02
+
+	__le32 timeout_override;
+	u8     link_reset_retries;
+	u8     _r_a[47];
+	__le16 conn_handle;
+	u8     _r_b[56];
+} __attribute__ ((packed));
+
+struct control_ata_dev {
+	u8     proto_conn_rate;
+	__le32 _r_a;
+	struct host_to_dev_fis fis;
+	u8     _r_b[32];
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     ata_flags;	  /* 0 */
+	u8     _r_c[55];
+} __attribute__ ((packed));
+
+struct empty_scb {
+	u8     num_valid;
+	__le32 _r_a;
+#define ASD_EDBS_PER_SCB 7
+/* header+data+CRC+DMA suffix data */
+#define ASD_EDB_SIZE (24+1024+4+16)
+	struct sg_el eb[ASD_EDBS_PER_SCB];
+#define ELEMENT_NOT_VALID  0xC0
+} __attribute__ ((packed));
+
+struct initiate_link_adm {
+	u8     phy_id;
+	u8     sub_func;
+#define GET_LINK_ERROR_COUNT      0x00
+#define RESET_LINK_ERROR_COUNT    0x01
+#define ENABLE_NOTIFY_SPINUP_INTS 0x02
+
+	u8     _r_a[57];
+	__le16 conn_handle;
+	u8     _r_b[56];
+} __attribute__ ((packed));
+
+struct copy_memory {
+	u8     _r_a;
+	__le16 xfer_len;
+	__le16 _r_b;
+	__le64 src_busaddr;
+	u8     src_ds;		  /* See definition of sg_el */
+	u8     _r_c[45];
+	__le16 conn_handle;
+	__le64 _r_d;
+	__le64 dest_busaddr;
+	u8     dest_ds;		  /* See definition of sg_el */
+	u8     _r_e[39];
+} __attribute__ ((packed));
+
+struct abort_task {
+	u8     proto_conn_rate;
+	__le32 _r_a;
+	struct ssp_frame_hdr ssp_frame;
+	struct ssp_tmf_iu ssp_task;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     flags;	  /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
+#define SUSPEND_DATA_TRANS 0x04
+
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c[5];
+	__le16 index;  /* Transaction context of task to be queried */
+	__le16 itnl_to;
+	u8     _r_d[44];
+} __attribute__ ((packed));
+
+struct clear_nexus {
+	u8     nexus;
+#define NEXUS_ADAPTER  0x00
+#define NEXUS_PORT     0x01
+#define NEXUS_I_T      0x02
+#define NEXUS_I_T_L    0x03
+#define NEXUS_TAG      0x04
+#define NEXUS_TRANS_CX 0x05
+#define NEXUS_SATA_TAG 0x06
+#define NEXUS_T_L      0x07
+#define NEXUS_L        0x08
+#define NEXUS_T_TAG    0x09
+
+	__le32 _r_a;
+	u8     flags;
+#define SUSPEND_TX     0x80
+#define RESUME_TX      0x40
+#define SEND_Q         0x04
+#define EXEC_Q         0x02
+#define NOTINQ         0x01
+
+	u8     _r_b[3];
+	u8     conn_mask;
+	u8     _r_c[19];
+	struct ssp_tmf_iu ssp_task; /* LUN and TAG */
+	__le16 _r_d;
+	__le16 conn_handle;
+	__le64 _r_e;
+	__le16 index;  /* Transaction context of task to be cleared */
+	__le16 context;		  /* Clear nexus context */
+	u8     _r_f[44];
+} __attribute__ ((packed));
+
+struct initiate_ssp_tmf {
+	u8     proto_conn_rate;
+	__le32 _r_a;
+	struct ssp_frame_hdr ssp_frame;
+	struct ssp_tmf_iu ssp_task;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     flags;	  /* itnl override and suspend data tx */
+#define OVERRIDE_ITNL_TIMER  8
+
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c[5];
+	__le16 index;  /* Transaction context of task to be queried */
+	__le16 itnl_to;
+	u8     _r_d[44];
+} __attribute__ ((packed));
+
+/* Transmits an arbitrary primitive on the link.
+ * Used for NOTIFY and BROADCAST.
+ */
+struct send_prim {
+	u8     phy_id;
+	u8     wait_transmit; 	  /* :0,0 */
+	u8     xmit_flags;
+#define XMTPSIZE_MASK      0xF0
+#define XMTPSIZE_SINGLE    0x10
+#define XMTPSIZE_REPEATED  0x20
+#define XMTPSIZE_CONT      0x20
+#define XMTPSIZE_TRIPLE    0x30
+#define XMTPSIZE_REDUNDANT 0x60
+#define XMTPSIZE_INF       0
+
+#define XMTCONTEN          0x04
+#define XMTPFRM            0x02	  /* Transmit at the next frame boundary */
+#define XMTPIMM            0x01	  /* Transmit immediately */
+
+	__le16 _r_a;
+	u8     prim[4];		  /* K, D0, D1, D2 */
+	u8     _r_b[50];
+	__le16 conn_handle;
+	u8     _r_c[56];
+} __attribute__ ((packed));
+
+/* This describes both SSP Target Get Data and SSP Target Get Data And
+ * Send Good Response SCBs.  Used when the sequencer is operating in
+ * target mode...
+ */
+struct ssp_targ_get_data {
+	u8     proto_conn_rate;
+	__le32 total_xfer_len;
+	struct ssp_frame_hdr ssp_frame;
+	struct xfer_rdy_iu  xfer_rdy;
+	u8     lun[LUN_SIZE];
+	__le64 _r_a;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     data_dir;	  /* 01b */
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c[5];
+	struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+/* ---------- The actual SCB struct ---------- */
+
+struct scb {
+	struct scb_header header;
+	union {
+		struct initiate_ssp_task ssp_task;
+		struct initiate_ata_task ata_task;
+		struct initiate_smp_task smp_task;
+		struct control_phy       control_phy;
+		struct control_ata_dev   control_ata_dev;
+		struct empty_scb         escb;
+		struct initiate_link_adm link_adm;
+		struct copy_memory       cp_mem;
+		struct abort_task        abort_task;
+		struct clear_nexus       clear_nexus;
+		struct initiate_ssp_tmf  ssp_tmf;
+	};
+} __attribute__ ((packed));
+
+/* ---------- Done List ---------- */
+/* The done list entry opcode field is defined below.
+ * The mnemonic encoding and meaning is as follows:
+ * TC - Task Complete, status was received and acknowledged
+ * TF - Task Failed, indicates an error prior to receiving acknowledgment
+ *   for the command:
+ *   - no conn,
+ *   - NACK or R_ERR received in response to this command,
+ *   - credit blocked or not available, or in the case of SMP request,
+ *   - no SMP response was received.
+ *   In these four cases it is known that the target didn't receive the
+ *   command.
+ * TI - Task Interrupted, error after the command was acknowledged.  It is
+ *   known that the command was received by the target.
+ * TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK
+ *   (R_ERR) was received due to loss of signal, broken connection, loss of
+ *   dword sync or other reason.  The application client should send the
+ *   appropriate task query.
+ * TA - Task Aborted, see TF.
+ * _RESP - The completion includes an empty buffer containing status.
+ * TO - Timeout.
+ */
+#define TC_NO_ERROR             0x00
+#define TC_UNDERRUN             0x01
+#define TC_OVERRUN              0x02
+#define TF_OPEN_TO              0x03
+#define TF_OPEN_REJECT          0x04
+#define TI_BREAK                0x05
+#define TI_PROTO_ERR            0x06
+#define TC_SSP_RESP             0x07
+#define TI_PHY_DOWN             0x08
+#define TF_PHY_DOWN             0x09
+#define TC_LINK_ADM_RESP        0x0a
+#define TC_CSMI                 0x0b
+#define TC_ATA_RESP             0x0c
+#define TU_PHY_DOWN             0x0d
+#define TU_BREAK                0x0e
+#define TI_SATA_TO              0x0f
+#define TI_NAK                  0x10
+#define TC_CONTROL_PHY          0x11
+#define TF_BREAK                0x12
+#define TC_RESUME               0x13
+#define TI_ACK_NAK_TO           0x14
+#define TF_SMPRSP_TO            0x15
+#define TF_SMP_XMIT_RCV_ERR     0x16
+#define TC_PARTIAL_SG_LIST      0x17
+#define TU_ACK_NAK_TO           0x18
+#define TU_SATA_TO              0x19
+#define TF_NAK_RECV             0x1a
+#define TA_I_T_NEXUS_LOSS       0x1b
+#define TC_ATA_R_ERR_RECV       0x1c
+#define TF_TMF_NO_CTX           0x1d
+#define TA_ON_REQ               0x1e
+#define TF_TMF_NO_TAG           0x1f
+#define TF_TMF_TAG_FREE         0x20
+#define TF_TMF_TASK_DONE        0x21
+#define TF_TMF_NO_CONN_HANDLE   0x22
+#define TC_TASK_CLEARED         0x23
+#define TI_SYNCS_RECV           0x24
+#define TU_SYNCS_RECV           0x25
+#define TF_IRTT_TO              0x26
+#define TF_NO_SMP_CONN          0x27
+#define TF_IU_SHORT             0x28
+#define TF_DATA_OFFS_ERR        0x29
+#define TF_INV_CONN_HANDLE      0x2a
+#define TF_REQUESTED_N_PENDING  0x2b
+
+/* 0xc1 - 0xc7: empty buffer received,
+   0xd1 - 0xd7: establish nexus empty buffer received
+*/
+/* This is the ESCB mask */
+#define ESCB_RECVD              0xC0
+
+
+/* This struct done_list_struct defines the done list entry.
+ * All fields are LE.
+ */
+struct done_list_struct {
+	__le16 index;		  /* aka transaction context */
+	u8     opcode;
+	u8     status_block[4];
+	u8     toggle;		  /* bit 0 */
+#define DL_TOGGLE_MASK     0x01
+} __attribute__ ((packed));
+
+/* ---------- PHYS ---------- */
+
+struct asd_phy {
+	struct asd_sas_phy        sas_phy;
+	struct asd_phy_desc   *phy_desc; /* hw profile */
+
+	struct sas_identify_frame *identify_frame;
+	struct asd_dma_tok  *id_frm_tok;
+	struct asd_port     *asd_port;
+
+	u8         frame_rcvd[ASD_EDB_SIZE];
+};
+
+
+#define ASD_SCB_SIZE sizeof(struct scb)
+#define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port)
+
+/* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent.
+ * Default: 0x10 (it's a mask)
+ */
+#define ASD_NOTIFY_ENABLE_SPINUP  0x10
+
+/* If enabled, set this to the interval between transmission
+ * of NOTIFY (ENABLE SPINUP). In units of 200 us.
+ */
+#define ASD_NOTIFY_TIMEOUT        2500
+
+/* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP).
+ * If 0, transmit immediately. In milliseconds.
+ */
+#define ASD_NOTIFY_DOWN_COUNT     0
+
+/* Device present timer timeout constant, 10 ms. */
+#define ASD_DEV_PRESENT_TIMEOUT   0x2710
+
+#define ASD_SATA_INTERLOCK_TIMEOUT 0
+
+/* How long to wait before shutting down an STP connection, unless
+ * an STP target sent frame(s). 50 usec.
+ * IGNORED by the sequencer (i.e. value 0 always).
+ */
+#define ASD_STP_SHUTDOWN_TIMEOUT  0x0
+
+/* ATA soft reset timer timeout. 5 usec. */
+#define ASD_SRST_ASSERT_TIMEOUT   0x05
+
+/* 31 sec */
+#define ASD_RCV_FIS_TIMEOUT       0x01D905C0
+
+#define ASD_ONE_MILLISEC_TIMEOUT  0x03e8
+
+/* COMINIT timer */
+#define ASD_TEN_MILLISEC_TIMEOUT  0x2710
+#define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT
+
+/* 1 sec */
+#define ASD_SMP_RCV_TIMEOUT       0x000F4240
+
+#endif