Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 121 insertions, 0 deletions

diff --git a/drivers/slimbus/sched.c b/drivers/slimbus/sched.c
new file mode 100644
index 000000000..af84997d2
--- /dev/null
+++ b/drivers/slimbus/sched.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2017, The Linux Foundation
+ */
+
+#include <linux/errno.h>
+#include "slimbus.h"
+
+/**
+ * slim_ctrl_clk_pause() - Called by slimbus controller to enter/exit
+ *			   'clock pause'
+ * @ctrl: controller requesting bus to be paused or woken up
+ * @wakeup: Wakeup this controller from clock pause.
+ * @restart: Restart time value per spec used for clock pause. This value
+ *	isn't used when controller is to be woken up.
+ *
+ * Slimbus specification needs this sequence to turn-off clocks for the bus.
+ * The sequence involves sending 3 broadcast messages (reconfiguration
+ * sequence) to inform all devices on the bus.
+ * To exit clock-pause, controller typically wakes up active framer device.
+ * This API executes clock pause reconfiguration sequence if wakeup is false.
+ * If wakeup is true, controller's wakeup is called.
+ * For entering clock-pause, -EBUSY is returned if a message txn in pending.
+ */
+int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart)
+{
+	int i, ret = 0;
+	unsigned long flags;
+	struct slim_sched *sched = &ctrl->sched;
+	struct slim_val_inf msg = {0, 0, NULL, NULL};
+
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, &msg);
+
+	if (wakeup == false && restart > SLIM_CLK_UNSPECIFIED)
+		return -EINVAL;
+
+	mutex_lock(&sched->m_reconf);
+	if (wakeup) {
+		if (sched->clk_state == SLIM_CLK_ACTIVE) {
+			mutex_unlock(&sched->m_reconf);
+			return 0;
+		}
+
+		/*
+		 * Fine-tune calculation based on clock gear,
+		 * message-bandwidth after bandwidth management
+		 */
+		ret = wait_for_completion_timeout(&sched->pause_comp,
+				msecs_to_jiffies(100));
+		if (!ret) {
+			mutex_unlock(&sched->m_reconf);
+			pr_err("Previous clock pause did not finish");
+			return -ETIMEDOUT;
+		}
+		ret = 0;
+
+		/*
+		 * Slimbus framework will call controller wakeup
+		 * Controller should make sure that it sets active framer
+		 * out of clock pause
+		 */
+		if (sched->clk_state == SLIM_CLK_PAUSED && ctrl->wakeup)
+			ret = ctrl->wakeup(ctrl);
+		if (!ret)
+			sched->clk_state = SLIM_CLK_ACTIVE;
+		mutex_unlock(&sched->m_reconf);
+
+		return ret;
+	}
+
+	/* already paused */
+	if (ctrl->sched.clk_state == SLIM_CLK_PAUSED) {
+		mutex_unlock(&sched->m_reconf);
+		return 0;
+	}
+
+	spin_lock_irqsave(&ctrl->txn_lock, flags);
+	for (i = 0; i < SLIM_MAX_TIDS; i++) {
+		/* Pending response for a message */
+		if (idr_find(&ctrl->tid_idr, i)) {
+			spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+			mutex_unlock(&sched->m_reconf);
+			return -EBUSY;
+		}
+	}
+	spin_unlock_irqrestore(&ctrl->txn_lock, flags);
+
+	sched->clk_state = SLIM_CLK_ENTERING_PAUSE;
+
+	/* clock pause sequence */
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		goto clk_pause_ret;
+
+	txn.mc = SLIM_MSG_MC_NEXT_PAUSE_CLOCK;
+	txn.rl = 4;
+	msg.num_bytes = 1;
+	msg.wbuf = &restart;
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		goto clk_pause_ret;
+
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+	txn.rl = 3;
+	msg.num_bytes = 1;
+	msg.wbuf = NULL;
+	ret = slim_do_transfer(ctrl, &txn);
+
+clk_pause_ret:
+	if (ret) {
+		sched->clk_state = SLIM_CLK_ACTIVE;
+	} else {
+		sched->clk_state = SLIM_CLK_PAUSED;
+		complete(&sched->pause_comp);
+	}
+	mutex_unlock(&sched->m_reconf);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(slim_ctrl_clk_pause);