Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

18 files changed, 3139 insertions, 0 deletions

diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
new file mode 100644
index 000000000..02e319508
--- /dev/null
+++ b/drivers/soc/samsung/Kconfig
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Samsung SoC drivers
+#
+menuconfig SOC_SAMSUNG
+	bool "Samsung SoC driver support" if COMPILE_TEST
+
+if SOC_SAMSUNG
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_ASV_ARM
+	bool "Exynos ASV ARMv7-specific driver extensions" if COMPILE_TEST
+	depends on EXYNOS_CHIPID
+
+config EXYNOS_CHIPID
+	tristate "Exynos ChipID controller and ASV driver"
+	depends on ARCH_EXYNOS || COMPILE_TEST
+	default ARCH_EXYNOS
+	select EXYNOS_ASV_ARM if ARM && ARCH_EXYNOS
+	select MFD_SYSCON
+	select SOC_BUS
+	help
+	  Support for Samsung Exynos SoC ChipID and Adaptive Supply Voltage.
+	  This driver can also be built as module (exynos_chipid).
+
+config EXYNOS_USI
+	tristate "Exynos USI (Universal Serial Interface) driver"
+	default ARCH_EXYNOS && ARM64
+	depends on ARCH_EXYNOS || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Enable support for USI block. USI (Universal Serial Interface) is an
+	  IP-core found in modern Samsung Exynos SoCs, like Exynos850 and
+	  ExynosAutoV9. USI block can be configured to provide one of the
+	  following serial protocols: UART, SPI or High Speed I2C.
+
+	  This driver allows one to configure USI for desired protocol, which
+	  is usually done in USI node in Device Tree.
+
+config EXYNOS_PMU
+	bool "Exynos PMU controller driver" if COMPILE_TEST
+	depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST)
+	select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS
+	select MFD_CORE
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_PMU_ARM_DRIVERS
+	bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST
+	depends on EXYNOS_PMU
+
+config EXYNOS_PM_DOMAINS
+	bool "Exynos PM domains" if COMPILE_TEST
+	depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
+
+config SAMSUNG_PM_DEBUG
+	bool "Samsung PM Suspend debug"
+	depends on PM && DEBUG_KERNEL
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+	depends on DEBUG_LL && MMU
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+	  for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+	select CRC32
+	help
+	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PM && SAMSUNG_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but will identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+
+config EXYNOS_REGULATOR_COUPLER
+	bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
+	depends on ARCH_EXYNOS || COMPILE_TEST
+endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
new file mode 100644
index 000000000..9f59d1905
--- /dev/null
+++ b/drivers/soc/samsung/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_EXYNOS_ASV_ARM)	+= exynos5422-asv.o
+obj-$(CONFIG_EXYNOS_CHIPID)	+= exynos_chipid.o
+exynos_chipid-y			+= exynos-chipid.o exynos-asv.o
+
+obj-$(CONFIG_EXYNOS_USI)	+= exynos-usi.o
+
+obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o
+
+obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS)	+= exynos3250-pmu.o exynos4-pmu.o \
+					exynos5250-pmu.o exynos5420-pmu.o
+obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
+obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
+
+obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= s3c-pm-check.o
+obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= s3c-pm-debug.o
diff --git a/drivers/soc/samsung/exynos-asv.c b/drivers/soc/samsung/exynos-asv.c
new file mode 100644
index 000000000..d60af8acc
--- /dev/null
+++ b/drivers/soc/samsung/exynos-asv.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage support
+ */
+
+#include <linux/cpu.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+
+#include "exynos-asv.h"
+#include "exynos5422-asv.h"
+
+#define MHZ 1000000U
+
+static int exynos_asv_update_cpu_opps(struct exynos_asv *asv,
+				      struct device *cpu)
+{
+	struct exynos_asv_subsys *subsys = NULL;
+	struct dev_pm_opp *opp;
+	unsigned int opp_freq;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) {
+		if (of_device_is_compatible(cpu->of_node,
+					    asv->subsys[i].cpu_dt_compat)) {
+			subsys = &asv->subsys[i];
+			break;
+		}
+	}
+	if (!subsys)
+		return -EINVAL;
+
+	for (i = 0; i < subsys->table.num_rows; i++) {
+		unsigned int new_volt, volt;
+		int ret;
+
+		opp_freq = exynos_asv_opp_get_frequency(subsys, i);
+
+		opp = dev_pm_opp_find_freq_exact(cpu, opp_freq * MHZ, true);
+		if (IS_ERR(opp)) {
+			dev_info(asv->dev, "cpu%d opp%d, freq: %u missing\n",
+				 cpu->id, i, opp_freq);
+
+			continue;
+		}
+
+		volt = dev_pm_opp_get_voltage(opp);
+		new_volt = asv->opp_get_voltage(subsys, i, volt);
+		dev_pm_opp_put(opp);
+
+		if (new_volt == volt)
+			continue;
+
+		ret = dev_pm_opp_adjust_voltage(cpu, opp_freq * MHZ,
+						new_volt, new_volt, new_volt);
+		if (ret < 0)
+			dev_err(asv->dev,
+				"Failed to adjust OPP %u Hz/%u uV for cpu%d\n",
+				opp_freq, new_volt, cpu->id);
+		else
+			dev_dbg(asv->dev,
+				"Adjusted OPP %u Hz/%u -> %u uV, cpu%d\n",
+				opp_freq, volt, new_volt, cpu->id);
+	}
+
+	return 0;
+}
+
+static int exynos_asv_update_opps(struct exynos_asv *asv)
+{
+	struct opp_table *last_opp_table = NULL;
+	struct device *cpu;
+	int ret, cpuid;
+
+	for_each_possible_cpu(cpuid) {
+		struct opp_table *opp_table;
+
+		cpu = get_cpu_device(cpuid);
+		if (!cpu)
+			continue;
+
+		opp_table = dev_pm_opp_get_opp_table(cpu);
+		if (IS_ERR(opp_table))
+			continue;
+
+		if (!last_opp_table || opp_table != last_opp_table) {
+			last_opp_table = opp_table;
+
+			ret = exynos_asv_update_cpu_opps(asv, cpu);
+			if (ret < 0)
+				dev_err(asv->dev, "Couldn't udate OPPs for cpu%d\n",
+					cpuid);
+		}
+
+		dev_pm_opp_put_opp_table(opp_table);
+	}
+
+	return	0;
+}
+
+int exynos_asv_init(struct device *dev, struct regmap *regmap)
+{
+	int (*probe_func)(struct exynos_asv *asv);
+	struct exynos_asv *asv;
+	struct device *cpu_dev;
+	u32 product_id = 0;
+	int ret, i;
+
+	asv = devm_kzalloc(dev, sizeof(*asv), GFP_KERNEL);
+	if (!asv)
+		return -ENOMEM;
+
+	asv->chipid_regmap = regmap;
+	asv->dev = dev;
+	ret = regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PRO_ID,
+			  &product_id);
+	if (ret < 0) {
+		dev_err(dev, "Cannot read revision from ChipID: %d\n", ret);
+		return -ENODEV;
+	}
+
+	switch (product_id & EXYNOS_MASK) {
+	case 0xE5422000:
+		probe_func = exynos5422_asv_init;
+		break;
+	default:
+		dev_dbg(dev, "No ASV support for this SoC\n");
+		devm_kfree(dev, asv);
+		return 0;
+	}
+
+	cpu_dev = get_cpu_device(0);
+	ret = dev_pm_opp_get_opp_count(cpu_dev);
+	if (ret < 0)
+		return -EPROBE_DEFER;
+
+	ret = of_property_read_u32(dev->of_node, "samsung,asv-bin",
+				   &asv->of_bin);
+	if (ret < 0)
+		asv->of_bin = -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(asv->subsys); i++)
+		asv->subsys[i].asv = asv;
+
+	ret = probe_func(asv);
+	if (ret < 0)
+		return ret;
+
+	return exynos_asv_update_opps(asv);
+}
diff --git a/drivers/soc/samsung/exynos-asv.h b/drivers/soc/samsung/exynos-asv.h
new file mode 100644
index 000000000..dcbe154db
--- /dev/null
+++ b/drivers/soc/samsung/exynos-asv.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage support
+ */
+#ifndef __LINUX_SOC_EXYNOS_ASV_H
+#define __LINUX_SOC_EXYNOS_ASV_H
+
+struct regmap;
+
+/* HPM, IDS values to select target group */
+struct asv_limit_entry {
+	unsigned int hpm;
+	unsigned int ids;
+};
+
+struct exynos_asv_table {
+	unsigned int num_rows;
+	unsigned int num_cols;
+	u32 *buf;
+};
+
+struct exynos_asv_subsys {
+	struct exynos_asv *asv;
+	const char *cpu_dt_compat;
+	int id;
+	struct exynos_asv_table table;
+
+	unsigned int base_volt;
+	unsigned int offset_volt_h;
+	unsigned int offset_volt_l;
+};
+
+struct exynos_asv {
+	struct device *dev;
+	struct regmap *chipid_regmap;
+	struct exynos_asv_subsys subsys[2];
+
+	int (*opp_get_voltage)(const struct exynos_asv_subsys *subs,
+			       int level, unsigned int voltage);
+	unsigned int group;
+	unsigned int table;
+
+	/* True if SG fields from PKG_ID register should be used */
+	bool use_sg;
+	/* ASV bin read from DT */
+	int of_bin;
+};
+
+static inline u32 __asv_get_table_entry(const struct exynos_asv_table *table,
+					unsigned int row, unsigned int col)
+{
+	return table->buf[row * (table->num_cols) + col];
+}
+
+static inline u32 exynos_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys,
+					unsigned int level, unsigned int group)
+{
+	return __asv_get_table_entry(&subsys->table, level, group + 1);
+}
+
+static inline u32 exynos_asv_opp_get_frequency(const struct exynos_asv_subsys *subsys,
+					unsigned int level)
+{
+	return __asv_get_table_entry(&subsys->table, level, 0);
+}
+
+int exynos_asv_init(struct device *dev, struct regmap *regmap);
+
+#endif /* __LINUX_SOC_EXYNOS_ASV_H */
diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c
new file mode 100644
index 000000000..0fb3631e7
--- /dev/null
+++ b/drivers/soc/samsung/exynos-chipid.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * Exynos - CHIP ID support
+ * Author: Pankaj Dubey <pankaj.dubey@samsung.com>
+ * Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage and Chip ID support
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+#include <linux/sys_soc.h>
+
+#include "exynos-asv.h"
+
+struct exynos_chipid_variant {
+	unsigned int rev_reg;		/* revision register offset */
+	unsigned int main_rev_shift;	/* main revision offset in rev_reg */
+	unsigned int sub_rev_shift;	/* sub revision offset in rev_reg */
+};
+
+struct exynos_chipid_info {
+	u32 product_id;
+	u32 revision;
+};
+
+static const struct exynos_soc_id {
+	const char *name;
+	unsigned int id;
+} soc_ids[] = {
+	/* List ordered by SoC name */
+	/* Compatible with: samsung,exynos4210-chipid */
+	{ "EXYNOS3250", 0xE3472000 },
+	{ "EXYNOS4210", 0x43200000 },	/* EVT0 revision */
+	{ "EXYNOS4210", 0x43210000 },
+	{ "EXYNOS4212", 0x43220000 },
+	{ "EXYNOS4412", 0xE4412000 },
+	{ "EXYNOS5250", 0x43520000 },
+	{ "EXYNOS5260", 0xE5260000 },
+	{ "EXYNOS5410", 0xE5410000 },
+	{ "EXYNOS5420", 0xE5420000 },
+	{ "EXYNOS5433", 0xE5433000 },
+	{ "EXYNOS5440", 0xE5440000 },
+	{ "EXYNOS5800", 0xE5422000 },
+	{ "EXYNOS7420", 0xE7420000 },
+	/* Compatible with: samsung,exynos850-chipid */
+	{ "EXYNOS7885", 0xE7885000 },
+	{ "EXYNOS850", 0xE3830000 },
+	{ "EXYNOSAUTOV9", 0xAAA80000 },
+};
+
+static const char *product_id_to_soc_id(unsigned int product_id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(soc_ids); i++)
+		if (product_id == soc_ids[i].id)
+			return soc_ids[i].name;
+	return NULL;
+}
+
+static int exynos_chipid_get_chipid_info(struct regmap *regmap,
+		const struct exynos_chipid_variant *data,
+		struct exynos_chipid_info *soc_info)
+{
+	int ret;
+	unsigned int val, main_rev, sub_rev;
+
+	ret = regmap_read(regmap, EXYNOS_CHIPID_REG_PRO_ID, &val);
+	if (ret < 0)
+		return ret;
+	soc_info->product_id = val & EXYNOS_MASK;
+
+	if (data->rev_reg != EXYNOS_CHIPID_REG_PRO_ID) {
+		ret = regmap_read(regmap, data->rev_reg, &val);
+		if (ret < 0)
+			return ret;
+	}
+	main_rev = (val >> data->main_rev_shift) & EXYNOS_REV_PART_MASK;
+	sub_rev = (val >> data->sub_rev_shift) & EXYNOS_REV_PART_MASK;
+	soc_info->revision = (main_rev << EXYNOS_REV_PART_SHIFT) | sub_rev;
+
+	return 0;
+}
+
+static int exynos_chipid_probe(struct platform_device *pdev)
+{
+	const struct exynos_chipid_variant *drv_data;
+	struct exynos_chipid_info soc_info;
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *root;
+	struct regmap *regmap;
+	int ret;
+
+	drv_data = of_device_get_match_data(&pdev->dev);
+	if (!drv_data)
+		return -EINVAL;
+
+	regmap = device_node_to_regmap(pdev->dev.of_node);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = exynos_chipid_get_chipid_info(regmap, drv_data, &soc_info);
+	if (ret < 0)
+		return ret;
+
+	soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
+				    GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Samsung Exynos";
+
+	root = of_find_node_by_path("/");
+	of_property_read_string(root, "model", &soc_dev_attr->machine);
+	of_node_put(root);
+
+	soc_dev_attr->revision = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+						"%x", soc_info.revision);
+	soc_dev_attr->soc_id = product_id_to_soc_id(soc_info.product_id);
+	if (!soc_dev_attr->soc_id) {
+		pr_err("Unknown SoC\n");
+		return -ENODEV;
+	}
+
+	/* please note that the actual registration will be deferred */
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		return PTR_ERR(soc_dev);
+
+	ret = exynos_asv_init(&pdev->dev, regmap);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, soc_dev);
+
+	dev_info(&pdev->dev, "Exynos: CPU[%s] PRO_ID[0x%x] REV[0x%x] Detected\n",
+		 soc_dev_attr->soc_id, soc_info.product_id, soc_info.revision);
+
+	return 0;
+
+err:
+	soc_device_unregister(soc_dev);
+
+	return ret;
+}
+
+static int exynos_chipid_remove(struct platform_device *pdev)
+{
+	struct soc_device *soc_dev = platform_get_drvdata(pdev);
+
+	soc_device_unregister(soc_dev);
+
+	return 0;
+}
+
+static const struct exynos_chipid_variant exynos4210_chipid_drv_data = {
+	.rev_reg	= 0x0,
+	.main_rev_shift	= 4,
+	.sub_rev_shift	= 0,
+};
+
+static const struct exynos_chipid_variant exynos850_chipid_drv_data = {
+	.rev_reg	= 0x10,
+	.main_rev_shift	= 20,
+	.sub_rev_shift	= 16,
+};
+
+static const struct of_device_id exynos_chipid_of_device_ids[] = {
+	{
+		.compatible	= "samsung,exynos4210-chipid",
+		.data		= &exynos4210_chipid_drv_data,
+	}, {
+		.compatible	= "samsung,exynos850-chipid",
+		.data		= &exynos850_chipid_drv_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, exynos_chipid_of_device_ids);
+
+static struct platform_driver exynos_chipid_driver = {
+	.driver = {
+		.name = "exynos-chipid",
+		.of_match_table = exynos_chipid_of_device_ids,
+	},
+	.probe	= exynos_chipid_probe,
+	.remove	= exynos_chipid_remove,
+};
+module_platform_driver(exynos_chipid_driver);
+
+MODULE_DESCRIPTION("Samsung Exynos ChipID controller and ASV driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c
new file mode 100644
index 000000000..732c86ce2
--- /dev/null
+++ b/drivers/soc/samsung/exynos-pmu.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// Exynos - CPU PMU(Power Management Unit) support
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+struct exynos_pmu_context {
+	struct device *dev;
+	const struct exynos_pmu_data *pmu_data;
+};
+
+void __iomem *pmu_base_addr;
+static struct exynos_pmu_context *pmu_context;
+
+void pmu_raw_writel(u32 val, u32 offset)
+{
+	writel_relaxed(val, pmu_base_addr + offset);
+}
+
+u32 pmu_raw_readl(u32 offset)
+{
+	return readl_relaxed(pmu_base_addr + offset);
+}
+
+void exynos_sys_powerdown_conf(enum sys_powerdown mode)
+{
+	unsigned int i;
+	const struct exynos_pmu_data *pmu_data;
+
+	if (!pmu_context || !pmu_context->pmu_data)
+		return;
+
+	pmu_data = pmu_context->pmu_data;
+
+	if (pmu_data->powerdown_conf)
+		pmu_data->powerdown_conf(mode);
+
+	if (pmu_data->pmu_config) {
+		for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
+			pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
+					pmu_data->pmu_config[i].offset);
+	}
+
+	if (pmu_data->powerdown_conf_extra)
+		pmu_data->powerdown_conf_extra(mode);
+}
+
+/*
+ * Split the data between ARM architectures because it is relatively big
+ * and useless on other arch.
+ */
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
+#define exynos_pmu_data_arm_ptr(data)	(&data)
+#else
+#define exynos_pmu_data_arm_ptr(data)	NULL
+#endif
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static const struct of_device_id exynos_pmu_of_device_ids[] = {
+	{
+		.compatible = "samsung,exynos3250-pmu",
+		.data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
+	}, {
+		.compatible = "samsung,exynos4210-pmu",
+		.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
+	}, {
+		.compatible = "samsung,exynos4412-pmu",
+		.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
+	}, {
+		.compatible = "samsung,exynos5250-pmu",
+		.data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
+	}, {
+		.compatible = "samsung,exynos5410-pmu",
+	}, {
+		.compatible = "samsung,exynos5420-pmu",
+		.data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
+	}, {
+		.compatible = "samsung,exynos5433-pmu",
+	}, {
+		.compatible = "samsung,exynos7-pmu",
+	}, {
+		.compatible = "samsung,exynos850-pmu",
+	},
+	{ /*sentinel*/ },
+};
+
+static const struct mfd_cell exynos_pmu_devs[] = {
+	{ .name = "exynos-clkout", },
+};
+
+struct regmap *exynos_get_pmu_regmap(void)
+{
+	struct device_node *np = of_find_matching_node(NULL,
+						      exynos_pmu_of_device_ids);
+	if (np)
+		return syscon_node_to_regmap(np);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap);
+
+static int exynos_pmu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	pmu_base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pmu_base_addr))
+		return PTR_ERR(pmu_base_addr);
+
+	pmu_context = devm_kzalloc(&pdev->dev,
+			sizeof(struct exynos_pmu_context),
+			GFP_KERNEL);
+	if (!pmu_context)
+		return -ENOMEM;
+	pmu_context->dev = dev;
+	pmu_context->pmu_data = of_device_get_match_data(dev);
+
+	if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_init)
+		pmu_context->pmu_data->pmu_init();
+
+	platform_set_drvdata(pdev, pmu_context);
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, exynos_pmu_devs,
+				   ARRAY_SIZE(exynos_pmu_devs), NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	if (devm_of_platform_populate(dev))
+		dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");
+
+	dev_dbg(dev, "Exynos PMU Driver probe done\n");
+	return 0;
+}
+
+static struct platform_driver exynos_pmu_driver = {
+	.driver  = {
+		.name   = "exynos-pmu",
+		.of_match_table = exynos_pmu_of_device_ids,
+	},
+	.probe = exynos_pmu_probe,
+};
+
+static int __init exynos_pmu_init(void)
+{
+	return platform_driver_register(&exynos_pmu_driver);
+
+}
+postcore_initcall(exynos_pmu_init);
diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
new file mode 100644
index 000000000..5e851f323
--- /dev/null
+++ b/drivers/soc/samsung/exynos-pmu.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header for Exynos PMU Driver support
+ */
+
+#ifndef __EXYNOS_PMU_H
+#define __EXYNOS_PMU_H
+
+#include <linux/io.h>
+
+#define PMU_TABLE_END	(-1U)
+
+struct exynos_pmu_conf {
+	unsigned int offset;
+	u8 val[NUM_SYS_POWERDOWN];
+};
+
+struct exynos_pmu_data {
+	const struct exynos_pmu_conf *pmu_config;
+
+	void (*pmu_init)(void);
+	void (*powerdown_conf)(enum sys_powerdown);
+	void (*powerdown_conf_extra)(enum sys_powerdown);
+};
+
+extern void __iomem *pmu_base_addr;
+
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
+/* list of all exported SoC specific data */
+extern const struct exynos_pmu_data exynos3250_pmu_data;
+extern const struct exynos_pmu_data exynos4210_pmu_data;
+extern const struct exynos_pmu_data exynos4412_pmu_data;
+extern const struct exynos_pmu_data exynos5250_pmu_data;
+extern const struct exynos_pmu_data exynos5420_pmu_data;
+#endif
+
+extern void pmu_raw_writel(u32 val, u32 offset);
+extern u32 pmu_raw_readl(u32 offset);
+#endif /* __EXYNOS_PMU_H */
diff --git a/drivers/soc/samsung/exynos-regulator-coupler.c b/drivers/soc/samsung/exynos-regulator-coupler.c
new file mode 100644
index 000000000..61a156b44
--- /dev/null
+++ b/drivers/soc/samsung/exynos-regulator-coupler.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Simplified generic voltage coupler from regulator core.c
+ * The main difference is that it keeps current regulator voltage
+ * if consumers didn't apply their constraints yet.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+static int regulator_get_optimal_voltage(struct regulator_dev *rdev,
+					 int *current_uV,
+					 int *min_uV, int *max_uV,
+					 suspend_state_t state)
+{
+	struct coupling_desc *c_desc = &rdev->coupling_desc;
+	struct regulator_dev **c_rdevs = c_desc->coupled_rdevs;
+	struct regulation_constraints *constraints = rdev->constraints;
+	int desired_min_uV = 0, desired_max_uV = INT_MAX;
+	int max_current_uV = 0, min_current_uV = INT_MAX;
+	int highest_min_uV = 0, target_uV, possible_uV;
+	int i, ret, max_spread, n_coupled = c_desc->n_coupled;
+	bool done;
+
+	*current_uV = -1;
+
+	/* Find highest min desired voltage */
+	for (i = 0; i < n_coupled; i++) {
+		int tmp_min = 0;
+		int tmp_max = INT_MAX;
+
+		lockdep_assert_held_once(&c_rdevs[i]->mutex.base);
+
+		ret = regulator_check_consumers(c_rdevs[i],
+						&tmp_min,
+						&tmp_max, state);
+		if (ret < 0)
+			return ret;
+
+		if (tmp_min == 0) {
+			ret = regulator_get_voltage_rdev(c_rdevs[i]);
+			if (ret < 0)
+				return ret;
+			tmp_min = ret;
+		}
+
+		/* apply constraints */
+		ret = regulator_check_voltage(c_rdevs[i], &tmp_min, &tmp_max);
+		if (ret < 0)
+			return ret;
+
+		highest_min_uV = max(highest_min_uV, tmp_min);
+
+		if (i == 0) {
+			desired_min_uV = tmp_min;
+			desired_max_uV = tmp_max;
+		}
+	}
+
+	max_spread = constraints->max_spread[0];
+
+	/*
+	 * Let target_uV be equal to the desired one if possible.
+	 * If not, set it to minimum voltage, allowed by other coupled
+	 * regulators.
+	 */
+	target_uV = max(desired_min_uV, highest_min_uV - max_spread);
+
+	/*
+	 * Find min and max voltages, which currently aren't violating
+	 * max_spread.
+	 */
+	for (i = 1; i < n_coupled; i++) {
+		int tmp_act;
+
+		tmp_act = regulator_get_voltage_rdev(c_rdevs[i]);
+		if (tmp_act < 0)
+			return tmp_act;
+
+		min_current_uV = min(tmp_act, min_current_uV);
+		max_current_uV = max(tmp_act, max_current_uV);
+	}
+
+	/*
+	 * Correct target voltage, so as it currently isn't
+	 * violating max_spread
+	 */
+	possible_uV = max(target_uV, max_current_uV - max_spread);
+	possible_uV = min(possible_uV, min_current_uV + max_spread);
+
+	if (possible_uV > desired_max_uV)
+		return -EINVAL;
+
+	done = (possible_uV == target_uV);
+	desired_min_uV = possible_uV;
+
+	/* Set current_uV if wasn't done earlier in the code and if necessary */
+	if (*current_uV == -1) {
+		ret = regulator_get_voltage_rdev(rdev);
+		if (ret < 0)
+			return ret;
+		*current_uV = ret;
+	}
+
+	*min_uV = desired_min_uV;
+	*max_uV = desired_max_uV;
+
+	return done;
+}
+
+static int exynos_coupler_balance_voltage(struct regulator_coupler *coupler,
+					  struct regulator_dev *rdev,
+					  suspend_state_t state)
+{
+	struct regulator_dev **c_rdevs;
+	struct regulator_dev *best_rdev;
+	struct coupling_desc *c_desc = &rdev->coupling_desc;
+	int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev;
+	unsigned int delta, best_delta;
+	unsigned long c_rdev_done = 0;
+	bool best_c_rdev_done;
+
+	c_rdevs = c_desc->coupled_rdevs;
+	n_coupled = c_desc->n_coupled;
+
+	/*
+	 * Find the best possible voltage change on each loop. Leave the loop
+	 * if there isn't any possible change.
+	 */
+	do {
+		best_c_rdev_done = false;
+		best_delta = 0;
+		best_min_uV = 0;
+		best_max_uV = 0;
+		best_c_rdev = 0;
+		best_rdev = NULL;
+
+		/*
+		 * Find highest difference between optimal voltage
+		 * and current voltage.
+		 */
+		for (i = 0; i < n_coupled; i++) {
+			/*
+			 * optimal_uV is the best voltage that can be set for
+			 * i-th regulator at the moment without violating
+			 * max_spread constraint in order to balance
+			 * the coupled voltages.
+			 */
+			int optimal_uV = 0, optimal_max_uV = 0, current_uV = 0;
+
+			if (test_bit(i, &c_rdev_done))
+				continue;
+
+			ret = regulator_get_optimal_voltage(c_rdevs[i],
+							    &current_uV,
+							    &optimal_uV,
+							    &optimal_max_uV,
+							    state);
+			if (ret < 0)
+				goto out;
+
+			delta = abs(optimal_uV - current_uV);
+
+			if (delta && best_delta <= delta) {
+				best_c_rdev_done = ret;
+				best_delta = delta;
+				best_rdev = c_rdevs[i];
+				best_min_uV = optimal_uV;
+				best_max_uV = optimal_max_uV;
+				best_c_rdev = i;
+			}
+		}
+
+		/* Nothing to change, return successfully */
+		if (!best_rdev) {
+			ret = 0;
+			goto out;
+		}
+
+		ret = regulator_set_voltage_rdev(best_rdev, best_min_uV,
+						 best_max_uV, state);
+
+		if (ret < 0)
+			goto out;
+
+		if (best_c_rdev_done)
+			set_bit(best_c_rdev, &c_rdev_done);
+
+	} while (n_coupled > 1);
+
+out:
+	return ret;
+}
+
+static int exynos_coupler_attach(struct regulator_coupler *coupler,
+				 struct regulator_dev *rdev)
+{
+	return 0;
+}
+
+static struct regulator_coupler exynos_coupler = {
+	.attach_regulator = exynos_coupler_attach,
+	.balance_voltage  = exynos_coupler_balance_voltage,
+};
+
+static int __init exynos_coupler_init(void)
+{
+	if (!of_machine_is_compatible("samsung,exynos5800"))
+		return 0;
+
+	return regulator_coupler_register(&exynos_coupler);
+}
+arch_initcall(exynos_coupler_init);
diff --git a/drivers/soc/samsung/exynos-usi.c b/drivers/soc/samsung/exynos-usi.c
new file mode 100644
index 000000000..114352695
--- /dev/null
+++ b/drivers/soc/samsung/exynos-usi.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * Samsung Exynos USI driver (Universal Serial Interface).
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/* USIv2: System Register: SW_CONF register bits */
+#define USI_V2_SW_CONF_NONE	0x0
+#define USI_V2_SW_CONF_UART	BIT(0)
+#define USI_V2_SW_CONF_SPI	BIT(1)
+#define USI_V2_SW_CONF_I2C	BIT(2)
+#define USI_V2_SW_CONF_MASK	(USI_V2_SW_CONF_UART | USI_V2_SW_CONF_SPI | \
+				 USI_V2_SW_CONF_I2C)
+
+/* USIv2: USI register offsets */
+#define USI_CON			0x04
+#define USI_OPTION		0x08
+
+/* USIv2: USI register bits */
+#define USI_CON_RESET		BIT(0)
+#define USI_OPTION_CLKREQ_ON	BIT(1)
+#define USI_OPTION_CLKSTOP_ON	BIT(2)
+
+enum exynos_usi_ver {
+	USI_VER2 = 2,
+};
+
+struct exynos_usi_variant {
+	enum exynos_usi_ver ver;	/* USI IP-core version */
+	unsigned int sw_conf_mask;	/* SW_CONF mask for all protocols */
+	size_t min_mode;		/* first index in exynos_usi_modes[] */
+	size_t max_mode;		/* last index in exynos_usi_modes[] */
+	size_t num_clks;		/* number of clocks to assert */
+	const char * const *clk_names;	/* clock names to assert */
+};
+
+struct exynos_usi {
+	struct device *dev;
+	void __iomem *regs;		/* USI register map */
+	struct clk_bulk_data *clks;	/* USI clocks */
+
+	size_t mode;			/* current USI SW_CONF mode index */
+	bool clkreq_on;			/* always provide clock to IP */
+
+	/* System Register */
+	struct regmap *sysreg;		/* System Register map */
+	unsigned int sw_conf;		/* SW_CONF register offset in sysreg */
+
+	const struct exynos_usi_variant *data;
+};
+
+struct exynos_usi_mode {
+	const char *name;		/* mode name */
+	unsigned int val;		/* mode register value */
+};
+
+static const struct exynos_usi_mode exynos_usi_modes[] = {
+	[USI_V2_NONE] =	{ .name = "none", .val = USI_V2_SW_CONF_NONE },
+	[USI_V2_UART] =	{ .name = "uart", .val = USI_V2_SW_CONF_UART },
+	[USI_V2_SPI] =	{ .name = "spi",  .val = USI_V2_SW_CONF_SPI },
+	[USI_V2_I2C] =	{ .name = "i2c",  .val = USI_V2_SW_CONF_I2C },
+};
+
+static const char * const exynos850_usi_clk_names[] = { "pclk", "ipclk" };
+static const struct exynos_usi_variant exynos850_usi_data = {
+	.ver		= USI_VER2,
+	.sw_conf_mask	= USI_V2_SW_CONF_MASK,
+	.min_mode	= USI_V2_NONE,
+	.max_mode	= USI_V2_I2C,
+	.num_clks	= ARRAY_SIZE(exynos850_usi_clk_names),
+	.clk_names	= exynos850_usi_clk_names,
+};
+
+static const struct of_device_id exynos_usi_dt_match[] = {
+	{
+		.compatible = "samsung,exynos850-usi",
+		.data = &exynos850_usi_data,
+	},
+	{ } /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, exynos_usi_dt_match);
+
+/**
+ * exynos_usi_set_sw_conf - Set USI block configuration mode
+ * @usi: USI driver object
+ * @mode: Mode index
+ *
+ * Select underlying serial protocol (UART/SPI/I2C) in USI IP-core.
+ *
+ * Return: 0 on success, or negative error code on failure.
+ */
+static int exynos_usi_set_sw_conf(struct exynos_usi *usi, size_t mode)
+{
+	unsigned int val;
+	int ret;
+
+	if (mode < usi->data->min_mode || mode > usi->data->max_mode)
+		return -EINVAL;
+
+	val = exynos_usi_modes[mode].val;
+	ret = regmap_update_bits(usi->sysreg, usi->sw_conf,
+				 usi->data->sw_conf_mask, val);
+	if (ret)
+		return ret;
+
+	usi->mode = mode;
+	dev_dbg(usi->dev, "protocol: %s\n", exynos_usi_modes[usi->mode].name);
+
+	return 0;
+}
+
+/**
+ * exynos_usi_enable - Initialize USI block
+ * @usi: USI driver object
+ *
+ * USI IP-core start state is "reset" (on startup and after CPU resume). This
+ * routine enables the USI block by clearing the reset flag. It also configures
+ * HWACG behavior (needed e.g. for UART Rx). It should be performed before
+ * underlying protocol becomes functional.
+ *
+ * Return: 0 on success, or negative error code on failure.
+ */
+static int exynos_usi_enable(const struct exynos_usi *usi)
+{
+	u32 val;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(usi->data->num_clks, usi->clks);
+	if (ret)
+		return ret;
+
+	/* Enable USI block */
+	val = readl(usi->regs + USI_CON);
+	val &= ~USI_CON_RESET;
+	writel(val, usi->regs + USI_CON);
+	udelay(1);
+
+	/* Continuously provide the clock to USI IP w/o gating */
+	if (usi->clkreq_on) {
+		val = readl(usi->regs + USI_OPTION);
+		val &= ~USI_OPTION_CLKSTOP_ON;
+		val |= USI_OPTION_CLKREQ_ON;
+		writel(val, usi->regs + USI_OPTION);
+	}
+
+	clk_bulk_disable_unprepare(usi->data->num_clks, usi->clks);
+
+	return ret;
+}
+
+static int exynos_usi_configure(struct exynos_usi *usi)
+{
+	int ret;
+
+	ret = exynos_usi_set_sw_conf(usi, usi->mode);
+	if (ret)
+		return ret;
+
+	if (usi->data->ver == USI_VER2)
+		return exynos_usi_enable(usi);
+
+	return 0;
+}
+
+static int exynos_usi_parse_dt(struct device_node *np, struct exynos_usi *usi)
+{
+	int ret;
+	u32 mode;
+
+	ret = of_property_read_u32(np, "samsung,mode", &mode);
+	if (ret)
+		return ret;
+	if (mode < usi->data->min_mode || mode > usi->data->max_mode)
+		return -EINVAL;
+	usi->mode = mode;
+
+	usi->sysreg = syscon_regmap_lookup_by_phandle(np, "samsung,sysreg");
+	if (IS_ERR(usi->sysreg))
+		return PTR_ERR(usi->sysreg);
+
+	ret = of_property_read_u32_index(np, "samsung,sysreg", 1,
+					 &usi->sw_conf);
+	if (ret)
+		return ret;
+
+	usi->clkreq_on = of_property_read_bool(np, "samsung,clkreq-on");
+
+	return 0;
+}
+
+static int exynos_usi_get_clocks(struct exynos_usi *usi)
+{
+	const size_t num = usi->data->num_clks;
+	struct device *dev = usi->dev;
+	size_t i;
+
+	if (num == 0)
+		return 0;
+
+	usi->clks = devm_kcalloc(dev, num, sizeof(*usi->clks), GFP_KERNEL);
+	if (!usi->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < num; ++i)
+		usi->clks[i].id = usi->data->clk_names[i];
+
+	return devm_clk_bulk_get(dev, num, usi->clks);
+}
+
+static int exynos_usi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct exynos_usi *usi;
+	int ret;
+
+	usi = devm_kzalloc(dev, sizeof(*usi), GFP_KERNEL);
+	if (!usi)
+		return -ENOMEM;
+
+	usi->dev = dev;
+	platform_set_drvdata(pdev, usi);
+
+	usi->data = of_device_get_match_data(dev);
+	if (!usi->data)
+		return -EINVAL;
+
+	ret = exynos_usi_parse_dt(np, usi);
+	if (ret)
+		return ret;
+
+	ret = exynos_usi_get_clocks(usi);
+	if (ret)
+		return ret;
+
+	if (usi->data->ver == USI_VER2) {
+		usi->regs = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(usi->regs))
+			return PTR_ERR(usi->regs);
+	}
+
+	ret = exynos_usi_configure(usi);
+	if (ret)
+		return ret;
+
+	/* Make it possible to embed protocol nodes into USI np */
+	return of_platform_populate(np, NULL, NULL, dev);
+}
+
+static int __maybe_unused exynos_usi_resume_noirq(struct device *dev)
+{
+	struct exynos_usi *usi = dev_get_drvdata(dev);
+
+	return exynos_usi_configure(usi);
+}
+
+static const struct dev_pm_ops exynos_usi_pm = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, exynos_usi_resume_noirq)
+};
+
+static struct platform_driver exynos_usi_driver = {
+	.driver = {
+		.name		= "exynos-usi",
+		.pm		= &exynos_usi_pm,
+		.of_match_table	= exynos_usi_dt_match,
+	},
+	.probe = exynos_usi_probe,
+};
+module_platform_driver(exynos_usi_driver);
+
+MODULE_DESCRIPTION("Samsung USI driver");
+MODULE_AUTHOR("Sam Protsenko <semen.protsenko@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/samsung/exynos3250-pmu.c b/drivers/soc/samsung/exynos3250-pmu.c
new file mode 100644
index 000000000..30f230ed1
--- /dev/null
+++ b/drivers/soc/samsung/exynos3250-pmu.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// Exynos3250 - CPU PMU (Power Management Unit) support
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos3250_pmu_config[] = {
+	/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
+	{ EXYNOS3_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS3_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS3_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS3_ARM_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x3} },
+	{ EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS3_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
+	{ EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG,		{ 0x3, 0x3, 0x3} },
+	{ EXYNOS3_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+	{ EXYNOS3_CAM_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_LCD0_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_MAUDIO_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ PMU_TABLE_END,},
+};
+
+static unsigned int const exynos3250_list_feed[] = {
+	EXYNOS3_ARM_CORE_OPTION(0),
+	EXYNOS3_ARM_CORE_OPTION(1),
+	EXYNOS3_ARM_CORE_OPTION(2),
+	EXYNOS3_ARM_CORE_OPTION(3),
+	EXYNOS3_ARM_COMMON_OPTION,
+	EXYNOS3_TOP_PWR_OPTION,
+	EXYNOS3_CORE_TOP_PWR_OPTION,
+	S5P_CAM_OPTION,
+	S5P_MFC_OPTION,
+	S5P_G3D_OPTION,
+	S5P_LCD0_OPTION,
+	S5P_ISP_OPTION,
+};
+
+static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
+{
+	unsigned int i;
+	unsigned int tmp;
+
+	/* Enable only SC_FEEDBACK */
+	for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
+		tmp = pmu_raw_readl(exynos3250_list_feed[i]);
+		tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
+		tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
+		pmu_raw_writel(tmp, exynos3250_list_feed[i]);
+	}
+
+	if (mode != SYS_SLEEP)
+		return;
+
+	pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
+	pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
+	pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
+	pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
+		       EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
+}
+
+static void exynos3250_pmu_init(void)
+{
+	unsigned int value;
+
+	/*
+	 * To prevent from issuing new bus request form L2 memory system
+	 * If core status is power down, should be set '1' to L2 power down
+	 */
+	value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
+	value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
+
+	/* Enable USE_STANDBY_WFI for all CORE */
+	pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+	/*
+	 * Set PSHOLD port for output high
+	 */
+	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+	value |= S5P_PS_HOLD_OUTPUT_HIGH;
+	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+
+	/*
+	 * Enable signal for PSHOLD port
+	 */
+	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+	value |= S5P_PS_HOLD_EN;
+	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+}
+
+const struct exynos_pmu_data exynos3250_pmu_data = {
+	.pmu_config	= exynos3250_pmu_config,
+	.pmu_init	= exynos3250_pmu_init,
+	.powerdown_conf_extra	= exynos3250_powerdown_conf_extra,
+};
diff --git a/drivers/soc/samsung/exynos4-pmu.c b/drivers/soc/samsung/exynos4-pmu.c
new file mode 100644
index 000000000..cb3510356
--- /dev/null
+++ b/drivers/soc/samsung/exynos4-pmu.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// Exynos4 - CPU PMU(Power Management Unit) support
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
+	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
+static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	/* XXX_OPTION register should be set other field */
+	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
+	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE3_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE3,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL3,			{ 0x0, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
+const struct exynos_pmu_data exynos4210_pmu_data = {
+	.pmu_config	= exynos4210_pmu_config,
+};
+
+const struct exynos_pmu_data exynos4412_pmu_data = {
+	.pmu_config		= exynos4412_pmu_config,
+};
diff --git a/drivers/soc/samsung/exynos5250-pmu.c b/drivers/soc/samsung/exynos5250-pmu.c
new file mode 100644
index 000000000..7a2d50be6
--- /dev/null
+++ b/drivers/soc/samsung/exynos5250-pmu.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// Exynos5250 - CPU PMU (Power Management Unit) support
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
+	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5_FSYS_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS5_ARM_L2_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
+	{ EXYNOS_L2_OPTION(0),				{ 0x10, 0x10, 0x0 } },
+	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_USBOTG_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_G2D_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_USBDRD_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_SDMMC_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_CSSYS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_SECSS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_ROTATOR_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_INTROM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_JPEG_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_JPEG_MEM_OPTION,			{ 0x10, 0x10, 0x0} },
+	{ EXYNOS5_HSI_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_SATA_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_GSCL_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_DISP1_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_MAU_SYS_PWR_REG,			{ 0x7, 0x7, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ PMU_TABLE_END,},
+};
+
+static unsigned int const exynos5_list_both_cnt_feed[] = {
+	EXYNOS5_ARM_CORE0_OPTION,
+	EXYNOS5_ARM_CORE1_OPTION,
+	EXYNOS5_ARM_COMMON_OPTION,
+	EXYNOS5_GSCL_OPTION,
+	EXYNOS5_ISP_OPTION,
+	EXYNOS5_MFC_OPTION,
+	EXYNOS5_G3D_OPTION,
+	EXYNOS5_DISP1_OPTION,
+	EXYNOS5_MAU_OPTION,
+	EXYNOS5_TOP_PWR_OPTION,
+	EXYNOS5_TOP_PWR_SYSMEM_OPTION,
+};
+
+static unsigned int const exynos5_list_disable_wfi_wfe[] = {
+	EXYNOS5_ARM_CORE1_OPTION,
+	EXYNOS5_FSYS_ARM_OPTION,
+	EXYNOS5_ISP_ARM_OPTION,
+};
+
+static void exynos5250_pmu_init(void)
+{
+	unsigned int value;
+	/*
+	 * When SYS_WDTRESET is set, watchdog timer reset request
+	 * is ignored by power management unit.
+	 */
+	value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+	value &= ~EXYNOS5_SYS_WDTRESET;
+	pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+
+	value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+	value &= ~EXYNOS5_SYS_WDTRESET;
+	pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+}
+
+static void exynos5_powerdown_conf(enum sys_powerdown mode)
+{
+	unsigned int i;
+	unsigned int tmp;
+
+	/*
+	 * Enable both SC_FEEDBACK and SC_COUNTER
+	 */
+	for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
+		tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
+		tmp |= (EXYNOS5_USE_SC_FEEDBACK |
+			EXYNOS5_USE_SC_COUNTER);
+		pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
+	}
+
+	/*
+	 * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
+	 */
+	tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
+	tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
+
+	/*
+	 * Disable WFI/WFE on XXX_OPTION
+	 */
+	for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
+		tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
+		tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
+			 EXYNOS5_OPTION_USE_STANDBYWFI);
+		pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]);
+	}
+}
+
+const struct exynos_pmu_data exynos5250_pmu_data = {
+	.pmu_config	= exynos5250_pmu_config,
+	.pmu_init	= exynos5250_pmu_init,
+	.powerdown_conf	= exynos5_powerdown_conf,
+};
diff --git a/drivers/soc/samsung/exynos5420-pmu.c b/drivers/soc/samsung/exynos5420-pmu.c
new file mode 100644
index 000000000..6fedcd78c
--- /dev/null
+++ b/drivers/soc/samsung/exynos5420-pmu.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com/
+//
+// Exynos5420 - CPU PMU (Power Management Unit) support
+
+#include <linux/pm.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include <asm/cputype.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos5420_pmu_config[] = {
+	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_ARM_CORE2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_ARM_CORE3_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE3_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_L2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x3, 0x0} },
+	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_INTRAM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5420_INTROM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GSCL_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_DISP1_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_MAU_SYS_PWR_REG,			{ 0x7, 0x7, 0x0} },
+	{ EXYNOS5420_G2D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_MSC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_FSYS_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_FSYS2_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_PSGEN_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_PERIC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_WCORE_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ PMU_TABLE_END,},
+};
+
+static unsigned int const exynos5420_list_disable_pmu_reg[] = {
+	EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
+	EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
+	EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
+	EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
+	EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
+	EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
+	EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
+	EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
+	EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
+};
+
+static void exynos5420_powerdown_conf(enum sys_powerdown mode)
+{
+	u32 this_cluster;
+
+	this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+
+	/*
+	 * set the cluster id to IROM register to ensure that we wake
+	 * up with the current cluster.
+	 */
+	pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
+}
+
+static void exynos5420_pmu_init(void)
+{
+	unsigned int value;
+	int i;
+
+	/*
+	 * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
+	 * for local power blocks to Low initially as per Table 8-4:
+	 * "System-Level Power-Down Configuration Registers".
+	 */
+	for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
+		pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
+
+	/* Enable USE_STANDBY_WFI for all CORE */
+	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+	value  = pmu_raw_readl(EXYNOS_L2_OPTION(0));
+	value &= ~EXYNOS_L2_USE_RETENTION;
+	pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
+
+	value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
+	value &= ~EXYNOS_L2_USE_RETENTION;
+	pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
+
+	/*
+	 * If L2_COMMON is turned off, clocks related to ATB async
+	 * bridge are gated. Thus, when ISP power is gated, LPI
+	 * may get stuck.
+	 */
+	value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
+	value |= EXYNOS5420_ATB_ISP_ARM;
+	pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
+
+	value  = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
+	value |= EXYNOS5420_ATB_KFC;
+	pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
+
+	/* Prevent issue of new bus request from L2 memory */
+	value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
+
+	value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
+	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
+
+	/* This setting is to reduce suspend/resume time */
+	pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
+
+	/* Serialized CPU wakeup of Eagle */
+	pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
+
+	pmu_raw_writel(SPREAD_USE_STANDWFI,
+			EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
+
+	pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
+
+	pr_info("EXYNOS5420 PMU initialized\n");
+}
+
+const struct exynos_pmu_data exynos5420_pmu_data = {
+	.pmu_config	= exynos5420_pmu_config,
+	.pmu_init	= exynos5420_pmu_init,
+	.powerdown_conf	= exynos5420_powerdown_conf,
+};
diff --git a/drivers/soc/samsung/exynos5422-asv.c b/drivers/soc/samsung/exynos5422-asv.c
new file mode 100644
index 000000000..475ae5276
--- /dev/null
+++ b/drivers/soc/samsung/exynos5422-asv.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ *
+ * Samsung Exynos 5422 SoC Adaptive Supply Voltage support
+ */
+
+#include <linux/bitrev.h>
+#include <linux/errno.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+#include <linux/slab.h>
+
+#include "exynos-asv.h"
+#include "exynos5422-asv.h"
+
+#define ASV_GROUPS_NUM		14
+#define ASV_ARM_DVFS_NUM	20
+#define ASV_ARM_BIN2_DVFS_NUM	17
+#define ASV_KFC_DVFS_NUM	14
+#define ASV_KFC_BIN2_DVFS_NUM	12
+
+/*
+ * This array is a set of 4 ASV data tables, first column of each ASV table
+ * contains frequency value in MHz and subsequent columns contain the CPU
+ * cluster's supply voltage values in uV.
+ * In order to create a set of OPPs for specific SoC revision one of the voltage
+ * columns (1...14) from one of the tables (0...3) is selected during
+ * initialization. There are separate ASV tables for the big (ARM) and little
+ * (KFC) CPU cluster. Only OPPs which are already defined in devicetree
+ * will be updated.
+ */
+
+static const u32 asv_arm_table[][ASV_ARM_DVFS_NUM][ASV_GROUPS_NUM + 1] = {
+{
+	/* ARM 0, 1 */
+	{ 2100,    1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+	  1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+	{ 2000,    1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000,
+	  1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1900,    1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000,
+	  1162500, 1150000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1800,    1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+	  1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1700,    1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+	  1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 },
+	{ 1600,    1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+	  1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 },
+	{ 1500,    1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+	  1000000, 987500,  1000000, 987500,  975000,  962500,  950000 },
+	{ 1400,    1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  975000,  962500,  950000,  937500,  925000 },
+	{ 1300,    1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  962500,  950000,  937500,  925000,  912500 },
+	{ 1200,    1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  937500,  925000,  912500,  900000,  900000 },
+	{ 1100,    1000000, 987500,  975000,  962500,  950000,  937500,  925000,
+	  912500,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 1000,    975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 900,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* ARM 2 */
+	{ 2100,    1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+	  1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+	{ 2000,    1312500, 1312500, 1312500, 1300000, 1275000, 1262500, 1250000,
+	  1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1900,    1262500, 1250000, 1250000, 1237500, 1212500, 1200000, 1187500,
+	  1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 },
+	{ 1800,    1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500,
+	  1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 },
+	{ 1700,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+	{ 1600,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+	{ 1500,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 1400,    1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000,
+	  987500,  975000,  987500,  975000,  962500,  950000,  937500 },
+	{ 1300,    1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  962500,  950000,  937500,  925000,  912500 },
+	{ 1200,    1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  937500,  925000,  912500,  900000,  900000 },
+	{ 1100,    1000000, 987500,  975000,  962500,  950000,  937500,  925000,
+	  912500,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 1000,    975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 900,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* ARM 3 */
+	{ 2100,    1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+	  1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+	{ 2000,    1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000,
+	  1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1900,    1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500,
+	  1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 },
+	{ 1800,    1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500,
+	  1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 },
+	{ 1700,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+	{ 1600,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+	{ 1500,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 1400,    1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000,
+	  987500,  975000,  987500,  975000,  962500,  950000,  937500 },
+	{ 1300,    1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  962500,  950000,  937500,  925000,  912500 },
+	{ 1200,    1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  937500,  925000,  912500,  900000,  900000 },
+	{ 1100,    1000000, 987500,  975000,  962500,  950000,  937500,  925000,
+	  912500,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 1000,    975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 900,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* ARM bin 2 */
+	{ 1800,    1237500, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500,
+	  1150000, 1137500, 1150000, 1137500, 1125000, 1112500, 1100000 },
+	{ 1700,    1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+	  1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1600,    1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+	  1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 },
+	{ 1500,    1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+	  1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 },
+	{ 1400,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 1300,    1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+	  1000000, 987500,  1000000, 987500,  975000,  962500,  950000 },
+	{ 1200,    1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  975000,  962500,  950000,  937500,  925000 },
+	{ 1100,    1037500, 1025000, 1012500, 1000000, 987500,  975000,  962500,
+	  950000,  937500,  950000,  937500,  925000,  912500,  900000 },
+	{ 1000,    1012500, 1000000, 987500,  975000,  962500,  950000,  937500,
+	  925000,  912500,  925000,  912500,  900000,  900000,  900000 },
+	{ 900,     987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     962500,  950000,  937500,  925000,  912500,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     937500,  925000,  912500,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}
+};
+
+static const u32 asv_kfc_table[][ASV_KFC_DVFS_NUM][ASV_GROUPS_NUM + 1] = {
+{
+	/* KFC 0, 1 */
+	{ 1500000, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+	  1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1400000, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+	  1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1300000, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+	  1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1200000, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+	{ 1100000, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000 },
+	{ 1000000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 987500,  975000,  962500,  950000,  937500 },
+	{ 900000,  1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  950000,  937500,  925000,  912500,  900000 },
+	{ 800000,  1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  912500,  900000,  900000,  900000,  900000 },
+	{ 700000,  987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600000,  950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500000,  912500,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400000,  900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300000,  900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200000,  900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* KFC 2 */
+	{ 1500,    1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+	  1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1400,    1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+	  1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1300,    1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+	  1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1200,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+	{ 1100,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000 },
+	{ 1000,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 987500,  975000,  962500,  950000,  937500 },
+	{ 900,     1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  950000,  937500,  925000,  912500,  900000 },
+	{ 800,     1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  912500,  900000,  900000,  900000,  900000 },
+	{ 700,     987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     912500,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* KFC 3 */
+	{ 1500,    1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+	  1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1400,    1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+	  1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1300,    1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+	  1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1200,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+	{ 1100,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000 },
+	{ 1000,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 987500,  975000,  962500,  950000,  937500 },
+	{ 900,     1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  950000,  937500,  925000,  912500,  900000 },
+	{ 800,     1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  912500,  900000,  900000,  900000,  900000 },
+	{ 700,     987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     912500,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* KFC bin 2 */
+	{ 1300,    1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000,
+	  1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500 },
+	{ 1200,    1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+	  1112500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+	{ 1100,    1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+	  1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+	{ 1000,    1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+	  1037500, 1025000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 900,     1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+	  1000000, 987500,  975000,  962500,  950000,  937500,  925000 },
+	{ 800,     1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  937500,  925000,  912500,  900000,  900000 },
+	{ 700,     1012500, 1000000, 987500,  975000,  962500,  950000,  937500,
+	  925000,  912500,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     937500,  925000,  912500,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}
+};
+
+static const struct asv_limit_entry __asv_limits[ASV_GROUPS_NUM] = {
+	{ 13, 55 },
+	{ 21, 65 },
+	{ 25, 69 },
+	{ 30, 72 },
+	{ 36, 74 },
+	{ 43, 76 },
+	{ 51, 78 },
+	{ 65, 80 },
+	{ 81, 82 },
+	{ 98, 84 },
+	{ 119, 87 },
+	{ 135, 89 },
+	{ 150, 92 },
+	{ 999, 999 },
+};
+
+static int exynos5422_asv_get_group(struct exynos_asv *asv)
+{
+	unsigned int pkgid_reg, auxi_reg;
+	int hpm, ids, i;
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkgid_reg);
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &auxi_reg);
+
+	if (asv->use_sg) {
+		u32 sga = (pkgid_reg >> EXYNOS5422_SG_A_OFFSET) &
+			   EXYNOS5422_SG_A_MASK;
+
+		u32 sgb = (pkgid_reg >> EXYNOS5422_SG_B_OFFSET) &
+			   EXYNOS5422_SG_B_MASK;
+
+		if ((pkgid_reg >> EXYNOS5422_SG_BSIGN_OFFSET) &
+		     EXYNOS5422_SG_BSIGN_MASK)
+			return sga + sgb;
+		else
+			return sga - sgb;
+	}
+
+	hpm = (auxi_reg >> EXYNOS5422_TMCB_OFFSET) & EXYNOS5422_TMCB_MASK;
+	ids = (pkgid_reg >> EXYNOS5422_IDS_OFFSET) & EXYNOS5422_IDS_MASK;
+
+	for (i = 0; i < ASV_GROUPS_NUM; i++) {
+		if (ids <= __asv_limits[i].ids)
+			break;
+		if (hpm <= __asv_limits[i].hpm)
+			break;
+	}
+	if (i < ASV_GROUPS_NUM)
+		return i;
+
+	return 0;
+}
+
+static int __asv_offset_voltage(unsigned int index)
+{
+	switch (index) {
+	case 1:
+		return 12500;
+	case 2:
+		return 50000;
+	case 3:
+		return 25000;
+	default:
+		return 0;
+	}
+}
+
+static void exynos5422_asv_offset_voltage_setup(struct exynos_asv *asv)
+{
+	struct exynos_asv_subsys *subsys;
+	unsigned int reg, value;
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &reg);
+
+	/* ARM offset voltage setup */
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM];
+
+	subsys->base_volt = 1000000;
+
+	value = (reg >> EXYNOS5422_ARM_UP_OFFSET) & EXYNOS5422_ARM_UP_MASK;
+	subsys->offset_volt_h = __asv_offset_voltage(value);
+
+	value = (reg >> EXYNOS5422_ARM_DN_OFFSET) & EXYNOS5422_ARM_DN_MASK;
+	subsys->offset_volt_l = __asv_offset_voltage(value);
+
+	/* KFC offset voltage setup */
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC];
+
+	subsys->base_volt = 1000000;
+
+	value = (reg >> EXYNOS5422_KFC_UP_OFFSET) & EXYNOS5422_KFC_UP_MASK;
+	subsys->offset_volt_h = __asv_offset_voltage(value);
+
+	value = (reg >> EXYNOS5422_KFC_DN_OFFSET) & EXYNOS5422_KFC_DN_MASK;
+	subsys->offset_volt_l = __asv_offset_voltage(value);
+}
+
+static int exynos5422_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys,
+					  int level, unsigned int volt)
+{
+	unsigned int asv_volt;
+
+	if (level >= subsys->table.num_rows)
+		return volt;
+
+	asv_volt = exynos_asv_opp_get_voltage(subsys, level,
+					      subsys->asv->group);
+
+	if (volt > subsys->base_volt)
+		asv_volt += subsys->offset_volt_h;
+	else
+		asv_volt += subsys->offset_volt_l;
+
+	return asv_volt;
+}
+
+static unsigned int exynos5422_asv_parse_table(unsigned int pkg_id)
+{
+	return (pkg_id >> EXYNOS5422_TABLE_OFFSET) & EXYNOS5422_TABLE_MASK;
+}
+
+static bool exynos5422_asv_parse_bin2(unsigned int pkg_id)
+{
+	return (pkg_id >> EXYNOS5422_BIN2_OFFSET) & EXYNOS5422_BIN2_MASK;
+}
+
+static bool exynos5422_asv_parse_sg(unsigned int pkg_id)
+{
+	return (pkg_id >> EXYNOS5422_USESG_OFFSET) & EXYNOS5422_USESG_MASK;
+}
+
+int exynos5422_asv_init(struct exynos_asv *asv)
+{
+	struct exynos_asv_subsys *subsys;
+	unsigned int table_index;
+	unsigned int pkg_id;
+	bool bin2;
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkg_id);
+
+	if (asv->of_bin == 2) {
+		bin2 = true;
+		asv->use_sg = false;
+	} else {
+		asv->use_sg = exynos5422_asv_parse_sg(pkg_id);
+		bin2 = exynos5422_asv_parse_bin2(pkg_id);
+	}
+
+	asv->group = exynos5422_asv_get_group(asv);
+	asv->table = exynos5422_asv_parse_table(pkg_id);
+
+	exynos5422_asv_offset_voltage_setup(asv);
+
+	if (bin2) {
+		table_index = 3;
+	} else {
+		if (asv->table == 2 || asv->table == 3)
+			table_index = asv->table - 1;
+		else
+			table_index = 0;
+	}
+
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM];
+	subsys->cpu_dt_compat = "arm,cortex-a15";
+	if (bin2)
+		subsys->table.num_rows = ASV_ARM_BIN2_DVFS_NUM;
+	else
+		subsys->table.num_rows = ASV_ARM_DVFS_NUM;
+	subsys->table.num_cols = ASV_GROUPS_NUM + 1;
+	subsys->table.buf = (u32 *)asv_arm_table[table_index];
+
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC];
+	subsys->cpu_dt_compat = "arm,cortex-a7";
+	if (bin2)
+		subsys->table.num_rows = ASV_KFC_BIN2_DVFS_NUM;
+	else
+		subsys->table.num_rows = ASV_KFC_DVFS_NUM;
+	subsys->table.num_cols = ASV_GROUPS_NUM + 1;
+	subsys->table.buf = (u32 *)asv_kfc_table[table_index];
+
+	asv->opp_get_voltage = exynos5422_asv_opp_get_voltage;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(exynos5422_asv_init);
diff --git a/drivers/soc/samsung/exynos5422-asv.h b/drivers/soc/samsung/exynos5422-asv.h
new file mode 100644
index 000000000..95a5fb1a7
--- /dev/null
+++ b/drivers/soc/samsung/exynos5422-asv.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ *
+ * Samsung Exynos 5422 SoC Adaptive Supply Voltage support
+ */
+
+#ifndef __LINUX_SOC_EXYNOS5422_ASV_H
+#define __LINUX_SOC_EXYNOS5422_ASV_H
+
+#include <linux/errno.h>
+
+enum {
+	EXYNOS_ASV_SUBSYS_ID_ARM,
+	EXYNOS_ASV_SUBSYS_ID_KFC,
+	EXYNOS_ASV_SUBSYS_ID_MAX
+};
+
+struct exynos_asv;
+
+#ifdef CONFIG_EXYNOS_ASV_ARM
+int exynos5422_asv_init(struct exynos_asv *asv);
+#else
+static inline int exynos5422_asv_init(struct exynos_asv *asv)
+{
+	return -ENOTSUPP;
+}
+#endif
+
+#endif /* __LINUX_SOC_EXYNOS5422_ASV_H */
diff --git a/drivers/soc/samsung/pm_domains.c b/drivers/soc/samsung/pm_domains.c
new file mode 100644
index 000000000..d07f3c9d6
--- /dev/null
+++ b/drivers/soc/samsung/pm_domains.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Exynos Generic power domain support.
+//
+// Copyright (c) 2012 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Implementation of Exynos specific power domain control which is used in
+// conjunction with runtime-pm. Support for both device-tree and non-device-tree
+// based power domain support is included.
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/pm_domain.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+
+struct exynos_pm_domain_config {
+	/* Value for LOCAL_PWR_CFG and STATUS fields for each domain */
+	u32 local_pwr_cfg;
+};
+
+/*
+ * Exynos specific wrapper around the generic power domain
+ */
+struct exynos_pm_domain {
+	void __iomem *base;
+	struct generic_pm_domain pd;
+	u32 local_pwr_cfg;
+};
+
+static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+	struct exynos_pm_domain *pd;
+	void __iomem *base;
+	u32 timeout, pwr;
+	char *op;
+
+	pd = container_of(domain, struct exynos_pm_domain, pd);
+	base = pd->base;
+
+	pwr = power_on ? pd->local_pwr_cfg : 0;
+	writel_relaxed(pwr, base);
+
+	/* Wait max 1ms */
+	timeout = 10;
+
+	while ((readl_relaxed(base + 0x4) & pd->local_pwr_cfg) != pwr) {
+		if (!timeout) {
+			op = (power_on) ? "enable" : "disable";
+			pr_err("Power domain %s %s failed\n", domain->name, op);
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		cpu_relax();
+		usleep_range(80, 100);
+	}
+
+	return 0;
+}
+
+static int exynos_pd_power_on(struct generic_pm_domain *domain)
+{
+	return exynos_pd_power(domain, true);
+}
+
+static int exynos_pd_power_off(struct generic_pm_domain *domain)
+{
+	return exynos_pd_power(domain, false);
+}
+
+static const struct exynos_pm_domain_config exynos4210_cfg = {
+	.local_pwr_cfg		= 0x7,
+};
+
+static const struct exynos_pm_domain_config exynos5433_cfg = {
+	.local_pwr_cfg		= 0xf,
+};
+
+static const struct of_device_id exynos_pm_domain_of_match[] = {
+	{
+		.compatible = "samsung,exynos4210-pd",
+		.data = &exynos4210_cfg,
+	}, {
+		.compatible = "samsung,exynos5433-pd",
+		.data = &exynos5433_cfg,
+	},
+	{ },
+};
+
+static const char *exynos_get_domain_name(struct device_node *node)
+{
+	const char *name;
+
+	if (of_property_read_string(node, "label", &name) < 0)
+		name = kbasename(node->full_name);
+	return kstrdup_const(name, GFP_KERNEL);
+}
+
+static int exynos_pd_probe(struct platform_device *pdev)
+{
+	const struct exynos_pm_domain_config *pm_domain_cfg;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args child, parent;
+	struct exynos_pm_domain *pd;
+	int on, ret;
+
+	pm_domain_cfg = of_device_get_match_data(dev);
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->pd.name = exynos_get_domain_name(np);
+	if (!pd->pd.name)
+		return -ENOMEM;
+
+	pd->base = of_iomap(np, 0);
+	if (!pd->base) {
+		kfree_const(pd->pd.name);
+		return -ENODEV;
+	}
+
+	pd->pd.power_off = exynos_pd_power_off;
+	pd->pd.power_on = exynos_pd_power_on;
+	pd->local_pwr_cfg = pm_domain_cfg->local_pwr_cfg;
+
+	on = readl_relaxed(pd->base + 0x4) & pd->local_pwr_cfg;
+
+	pm_genpd_init(&pd->pd, NULL, !on);
+	ret = of_genpd_add_provider_simple(np, &pd->pd);
+
+	if (ret == 0 && of_parse_phandle_with_args(np, "power-domains",
+				      "#power-domain-cells", 0, &parent) == 0) {
+		child.np = np;
+		child.args_count = 0;
+
+		if (of_genpd_add_subdomain(&parent, &child))
+			pr_warn("%pOF failed to add subdomain: %pOF\n",
+				parent.np, child.np);
+		else
+			pr_info("%pOF has as child subdomain: %pOF.\n",
+				parent.np, child.np);
+	}
+
+	pm_runtime_enable(dev);
+	return ret;
+}
+
+static struct platform_driver exynos_pd_driver = {
+	.probe	= exynos_pd_probe,
+	.driver	= {
+		.name		= "exynos-pd",
+		.of_match_table	= exynos_pm_domain_of_match,
+		.suppress_bind_attrs = true,
+	}
+};
+
+static __init int exynos4_pm_init_power_domain(void)
+{
+	return platform_driver_register(&exynos_pd_driver);
+}
+core_initcall(exynos4_pm_init_power_domain);
diff --git a/drivers/soc/samsung/s3c-pm-check.c b/drivers/soc/samsung/s3c-pm-check.c
new file mode 100644
index 000000000..439d5c372
--- /dev/null
+++ b/drivers/soc/samsung/s3c-pm-check.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// originally in linux/arch/arm/plat-s3c24xx/pm.c
+//
+// Copyright (c) 2004-2008 Simtec Electronics
+//	http://armlinux.simtec.co.uk
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C Power Mangament - suspend/resume memory corruption check.
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <linux/soc/samsung/s3c-pm.h>
+
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size;	/* size needed for the crc block */
+static u32 *crcs;	/* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+	while (ptr != NULL) {
+		if (ptr->child != NULL)
+			s3c_pm_run_res(ptr->child, fn, arg);
+
+		if ((ptr->flags & IORESOURCE_SYSTEM_RAM)
+				== IORESOURCE_SYSTEM_RAM) {
+			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+				  (unsigned long)ptr->start,
+				  (unsigned long)ptr->end);
+			arg = (fn)(ptr, arg);
+		}
+
+		ptr = ptr->sibling;
+	}
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+	s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+	u32 size = (u32)resource_size(res);
+
+	size += CHECK_CHUNKSIZE-1;
+	size /= CHECK_CHUNKSIZE;
+
+	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+		  (unsigned long)res->start, (unsigned long)res->end, size);
+
+	*val += size * sizeof(u32);
+	return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+	crc_size = 0;
+
+	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+	crcs = kmalloc(crc_size+4, GFP_KERNEL);
+	if (crcs == NULL)
+		printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+	unsigned long addr, left;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		*val = crc32_le(~0, phys_to_virt(addr), left);
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+	if ((what+whatsz) < ptr)
+		return 0;
+
+	if (what > (ptr+size))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * s3c_pm_runcheck() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @val: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+	unsigned long addr;
+	unsigned long left;
+	void *stkpage;
+	void *ptr;
+	u32 calc;
+
+	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		ptr = phys_to_virt(addr);
+
+		if (in_region(ptr, left, stkpage, 4096)) {
+			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, crcs, crc_size)) {
+			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+			goto skip_check;
+		}
+
+		/* calculate and check the checksum */
+
+		calc = crc32_le(~0, ptr, left);
+		if (calc != *val) {
+			printk(KERN_ERR "Restore CRC error at "
+			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			    addr, calc, *val);
+		}
+
+	skip_check:
+		val++;
+	}
+
+	return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+}
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+	kfree(crcs);
+	crcs = NULL;
+}
+
diff --git a/drivers/soc/samsung/s3c-pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
new file mode 100644
index 000000000..b5ce0e9a4
--- /dev/null
+++ b/drivers/soc/samsung/s3c-pm-debug.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Samsung Electronics Co., Ltd.
+//	Tomasz Figa <t.figa@samsung.com>
+// Copyright (C) 2008 Openmoko, Inc.
+// Copyright (C) 2004-2008 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//	http://armlinux.simtec.co.uk/
+//
+// Samsung common power management (suspend to RAM) debug support
+
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <linux/soc/samsung/s3c-pm.h>
+
+static struct pm_uart_save uart_save;
+
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsnprintf(buff, sizeof(buff), fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+static inline void __iomem *s3c_pm_uart_base(void)
+{
+	unsigned long paddr;
+	unsigned long vaddr;
+
+	debug_ll_addr(&paddr, &vaddr);
+
+	return (void __iomem *)vaddr;
+}
+
+void s3c_pm_save_uarts(bool is_s3c2410)
+{
+	void __iomem *regs = s3c_pm_uart_base();
+	struct pm_uart_save *save = &uart_save;
+
+	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+	save->ucon = __raw_readl(regs + S3C2410_UCON);
+	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+	save->umcon = __raw_readl(regs + S3C2410_UMCON);
+	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (!is_s3c2410)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+}
+
+void s3c_pm_restore_uarts(bool is_s3c2410)
+{
+	void __iomem *regs = s3c_pm_uart_base();
+	struct pm_uart_save *save = &uart_save;
+
+	s3c_pm_arch_update_uart(regs, save);
+
+	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
+	__raw_writel(save->ucon,  regs + S3C2410_UCON);
+	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
+	__raw_writel(save->umcon, regs + S3C2410_UMCON);
+	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (!is_s3c2410)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+}